Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immun...Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.展开更多
Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prep...Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.展开更多
As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrog...As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.展开更多
Lignin-derived oxygenated aromatics,particularly phenols and aromatic ethers obtained through depolymerization,represent promising feedstocks for synthesizing high-density and high-heat-sink aviation fuels via alkylat...Lignin-derived oxygenated aromatics,particularly phenols and aromatic ethers obtained through depolymerization,represent promising feedstocks for synthesizing high-density and high-heat-sink aviation fuels via alkylation-hydrogenation processes.This study systematically evaluates the catalytic performance of various zeolites(Hβ,HZSM-5,MCM-41 and HUSY)in the alkylation reaction of phenol with cyclohexanol.Characterization results demonstrate that HUSY zeolite showed superior catalytic activity compared to other zeolites,attributable to its favorable pore architecture and well-balanced acid site distribution that synergistically facilitate molecular diffusion and catalytic transformations.To further enhance the catalytic properties,HUSY zeolite was modified with citric acid at various concentrations and compared with those treated with NaOH and oxalic acid.The results revealed that citric acid treatment preserved the crystallinity of the zeolite while modulating its acid distribution and pore structure.All modified zeolites enhanced phenol alkylation activity.Notably,the HUSY-0.5M catalyst,which exhibited the highest medium-strong acid to total acid ratio,achieved superior catalytic performance,80.4%conversion of phenol and 99.6%selectivity for alkylation products.The catalyst also exhibited high activity in the alkylation of various lignin-derived compounds,demonstrating its broad applicability.This work provides a new strategy for the valorization of lignin-derived phenols into high-value fuel precursors through alkylation.展开更多
Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellen...Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.展开更多
Economical and sustainable wastewater treatment techniques are highly demanded to alleviate the issues of clearwater scarcity globally.In this work,the acetic acid/H_(2)O_(2) (AHP) was leveraged to enrich oxygenated f...Economical and sustainable wastewater treatment techniques are highly demanded to alleviate the issues of clearwater scarcity globally.In this work,the acetic acid/H_(2)O_(2) (AHP) was leveraged to enrich oxygenated functional groups on the biochar surface for efficient ciprofloxacin (CIP) adsorption and biochar regeneration (In situ degradation of CIP in the spent AHP solution).The AHP-modified biochar exhibited significantly enhanced CIP adsorption capacity,about 22 times that of the pristine biochar.The optimized modification condition (acetic acid/H_(2)O_(2):2.11,temperature:45 ℃,and time:12 h) was screened by the response surface method,reaching the highest CIP adsorption capacity of 86.26 mg·g^(−1).Characterization results revealed that the content of carboxyl —Cdouble bondO—O was enhanced in AHP-modified biochar,which contributed to efficient CIP adsorption by the electrostatic interaction,hydrogen bonding,and hydrophobic interaction.The adsorption of modified biochar to CIP molecules was a spontaneous endothermic process,and in line with the pseudo-second-order model and the Langmuir isotherm model.Moreover,the biochar modification process enabled the spent AHP solution with a strong oxidizing agent of peracetic acid (PAA),which can be employed to degrade adsorbed CIP for biochar in-situ generation.This work tailored a closed-loop strategy for biochar oxidation,contaminant adsorption,and biochar regeneration,highlighting a viable route for sustainable wastewater treatment.展开更多
Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLD...Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
Interfacial interactions between rough mineral particles have garnered considerable attention as they directly determine particle agglomeration and floatability.This study comprehensively investigates the agglomeratio...Interfacial interactions between rough mineral particles have garnered considerable attention as they directly determine particle agglomeration and floatability.This study comprehensively investigates the agglomeration characteristics of siderite particles after argon(Ar)plasma surface modification through settling tests,flocs size measurements,and fractal dimension calculations.Ar plasma surface modification promotes the agglomeration of siderite particles,as evidenced by increased floc size and density.The agglomeration mechanism induced by Ar plasma surface modification is evaluated using a theoretical model combining the surface element integration(SEI)approach,differential geometry,and the composite Simpson's rule.Changes in surface roughness,wettability,and charge are considered in this model.Compared to the unpretreated siderite particles,the energy barrier for interaction of the 30-min Ar plasma-pretreated siderite particles decreases from 2.3×10-^(17)J to 1.6×10^(-17)J.This reduction provides strong evidence for the agglomeration behavior of siderite particles.Furthermore,flotation experiments confirm that Ar plasma surface modification is conducive to the aggregation flotation of siderite.These findings offer crucial insights into particle aggregation and dispersion behaviors,with notable application in mineral flotation.展开更多
To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt b...To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.展开更多
The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capa...The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capacity of layered transition metal oxides;however,it also exacerbates the release of lattice oxygen and the contraction of the unit cell.Ternary materials are designed in a secondary particle state to meet the requirements of power battery applications.Therefore,to create ternary materials that can operate under ultrahigh voltages,attention should be given to both surface modification and particle integrity maintenance.By utilizing elemental selenium(Se)with a low melting point,easy sublimation,and multiple variable valence states,deep grain boundary modification was implemented inside the particles.The performance of the cathode material was evaluated through pouch cells,and the improvement mechanism was explored through molecular dynamics simulation calculations.Under the protection of a three-dimensional Se-rich modified layer,LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)achieved stable operation at ultrahigh voltages(4.6 V vs.Li/Li^(+));a sacrificial protection mechanism based on the chronic decomposition of the Se-rich layer was proposed to explain the efficacy of Se modification in stabilizing ternary materials.This deep grain boundary modification based on elemental Se provides a new solution for the ultrahigh-voltage operation of transition metal oxides and provides a scientific basis and technical support for solving the interface contact problem of all-solid-state batteries.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ...In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.展开更多
Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge reco...Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO...MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.展开更多
The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiqui...The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiquitous in the immune response of the central nervous system.The fat mass and obesity-related protein catalyzes the demethylation of N^(6)-methyladenosine modifications on mRNA and is widely expressed in various tissues,participating in the regulation of multiple diseases’biological processes.However,the role of fat mass and obesity in microglial activation and the subsequent neuroinflammatory response after traumatic brain injury is unclear.In this study,we found that the expression of fat mass and obesity was significantly down-regulated in both lipopolysaccharide-treated BV2 cells and a traumatic brain injury mouse model.After fat mass and obesity interference,BV2 cells exhibited a pro-inflammatory phenotype as shown by the increased proportion of CD11b^(+)/CD86^(+)cells and the secretion of pro-inflammatory cytokines.Fat mass and obesity-mediated N^(6)-methyladenosine demethylation accelerated the degradation of ADAM17 mRNA,while silencing of fat mass and obesity enhanced the stability of ADAM17 mRNA.Therefore,down-regulation of fat mass and obesity expression leads to the abnormally high expression of ADAM17 in microglia.These results indicate that the activation of microglia and neuroinflammatory response regulated by fat mass and obesity-related N^(6)-methyladenosine modification plays an important role in the pro-inflammatory process of secondary injury following traumatic brain injury.展开更多
Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein ...Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein abundance but are also primarily regulated by various post-translational protein modifications.Lactate,once considered merely a byproduct of anaerobic metabolism,has emerged as a crucial energy substrate and signaling molecule involved in both physiological and pathological processes within the nervous system.Furthermore,recent studies have emphasized the significant role of lactate in numerous neurological diseases,including Alzheimer's disease,Parkinson's disease,acute cerebral ischemic stroke,multiple sclerosis,Huntington's disease,and myasthenia gravis.The purpose of this review is to synthesize the current research on lactate and lactylation modifications in neurological diseases,aiming to clarify their mechanisms of action and identify potential therapeutic targets.As such,this work provides an overview of the metabolic regulatory roles of lactate in various disorders,emphasizing its involvement in the regulation of brain function.Additionally,the specific mechanisms of brain lactate metabolism are discussed,suggesting the unique roles of lactate in modulating brain function.As a critical aspect of lactate function,lactylation modifications,including both histone and non-histone lactylation,are explored,with an emphasis on recent advancements in identifying the key regulatory enzymes of such modifications,such as lactylation writers and erasers.The effects and specific mechanisms of abnormal lactate metabolism in diverse neurological diseases are summarized,revealing that lactate acts as a signaling molecule in the regulation of brain functions and that abnormal lactate metabolism is implicated in the progression of various neurological disorders.Future research should focus on further elucidating the molecular mechanisms underlying lactate and lactylation modifications and exploring their potential as therapeutic targets for neurological diseases.展开更多
In recent years,exosomes have garnered extensive attention as therapeutic agents and early diagnostic markers in neurodegenerative disease research.Exosomes are small and can effectively cross the blood-brain barrier,...In recent years,exosomes have garnered extensive attention as therapeutic agents and early diagnostic markers in neurodegenerative disease research.Exosomes are small and can effectively cross the blood-brain barrier,allowing them to target deep brain lesions.Recent studies have demonstrated that exosomes derived from different cell types may exert therapeutic effects by regulating the expression of various inflammatory cytokines,mRNAs,and disease-related proteins,thereby halting the progression of neurodegenerative diseases and exhibiting beneficial effects.However,exosomes are composed of lipid bilayer membranes and lack the ability to recognize specific target cells.This limitation can lead to side effects and toxicity when they interact with non-specific cells.Growing evidence suggests that surface-modified exosomes have enhanced targeting capabilities and can be used as targeted drug-delivery vehicles that show promising results in the treatment of neurodegenerative diseases.In this review,we provide an up-to-date overview of existing research aimed at devising approaches to modify exosomes and elucidating their therapeutic potential in neurodegenerative diseases.Our findings indicate that exosomes can efficiently cross the blood-brain barrier to facilitate drug delivery and can also serve as early diagnostic markers for neurodegenerative diseases.We introduce the strategies being used to enhance exosome targeting,including genetic engineering,chemical modifications(both covalent,such as click chemistry and metabolic engineering,and non-covalent,such as polyvalent electrostatic and hydrophobic interactions,ligand-receptor binding,aptamer-based modifications,and the incorporation of CP05-anchored peptides),and nanomaterial modifications.Research into these strategies has confirmed that exosomes have significant therapeutic potential for neurodegenerative diseases.However,several challenges remain in the clinical application of exosomes.Improvements are needed in preparation,characterization,and optimization methods,as well as in reducing the adverse reactions associated with their use.Additionally,the range of applications and the safety of exosomes require further research and evaluation.展开更多
基金supported by the National Natural Science Foundation of China(Nos.82573045,82460602,82560459)the Hainan Provincial Graduate Student Innovative Research Project(No.Qhys2024-440).
文摘Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.
基金Supported by National Key R&D Program of China(2022YFA1503400)。
文摘Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.
基金Supported by Design and Performance Study of High-flux Metal Hydride Reactor Based on the Bionic Optimization(2078262)the‘Four-Chain’Integration Project at the Qinchuangyuan Chief Platform(S2025-YF-ZDXM)。
文摘As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.
基金Supported by National Key Research&Development Program of China (2022YFB4201800)Key Program of National Natural Science Foundation of China (52130610)。
文摘Lignin-derived oxygenated aromatics,particularly phenols and aromatic ethers obtained through depolymerization,represent promising feedstocks for synthesizing high-density and high-heat-sink aviation fuels via alkylation-hydrogenation processes.This study systematically evaluates the catalytic performance of various zeolites(Hβ,HZSM-5,MCM-41 and HUSY)in the alkylation reaction of phenol with cyclohexanol.Characterization results demonstrate that HUSY zeolite showed superior catalytic activity compared to other zeolites,attributable to its favorable pore architecture and well-balanced acid site distribution that synergistically facilitate molecular diffusion and catalytic transformations.To further enhance the catalytic properties,HUSY zeolite was modified with citric acid at various concentrations and compared with those treated with NaOH and oxalic acid.The results revealed that citric acid treatment preserved the crystallinity of the zeolite while modulating its acid distribution and pore structure.All modified zeolites enhanced phenol alkylation activity.Notably,the HUSY-0.5M catalyst,which exhibited the highest medium-strong acid to total acid ratio,achieved superior catalytic performance,80.4%conversion of phenol and 99.6%selectivity for alkylation products.The catalyst also exhibited high activity in the alkylation of various lignin-derived compounds,demonstrating its broad applicability.This work provides a new strategy for the valorization of lignin-derived phenols into high-value fuel precursors through alkylation.
文摘Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.
基金supported by the National Natural Science Foundation of China(22478266 and 32472027)the National Key Research&Development Program of China(2022YFE0207100)the Department of Science and Technology of Sichuan Province(2024ZYD0080 and 2022YFN0027).
文摘Economical and sustainable wastewater treatment techniques are highly demanded to alleviate the issues of clearwater scarcity globally.In this work,the acetic acid/H_(2)O_(2) (AHP) was leveraged to enrich oxygenated functional groups on the biochar surface for efficient ciprofloxacin (CIP) adsorption and biochar regeneration (In situ degradation of CIP in the spent AHP solution).The AHP-modified biochar exhibited significantly enhanced CIP adsorption capacity,about 22 times that of the pristine biochar.The optimized modification condition (acetic acid/H_(2)O_(2):2.11,temperature:45 ℃,and time:12 h) was screened by the response surface method,reaching the highest CIP adsorption capacity of 86.26 mg·g^(−1).Characterization results revealed that the content of carboxyl —Cdouble bondO—O was enhanced in AHP-modified biochar,which contributed to efficient CIP adsorption by the electrostatic interaction,hydrogen bonding,and hydrophobic interaction.The adsorption of modified biochar to CIP molecules was a spontaneous endothermic process,and in line with the pseudo-second-order model and the Langmuir isotherm model.Moreover,the biochar modification process enabled the spent AHP solution with a strong oxidizing agent of peracetic acid (PAA),which can be employed to degrade adsorbed CIP for biochar in-situ generation.This work tailored a closed-loop strategy for biochar oxidation,contaminant adsorption,and biochar regeneration,highlighting a viable route for sustainable wastewater treatment.
基金financially supported by the Science and Technology Project of PetroChina Company Limited,China(No.2022DJ6314)the National Natural Science Foundation of China(No.52173056)。
文摘Dynamic melt modification of polyethylene via the direct grafting of peroxide fragments shows promise for the development of processable functionalized materials.In this study,four linear low-density polyethylenes(LLDPEs)with comparable molecular weights but different short-chain branch(SCB)contents(ranging of 5-66 per 1000 carbon atoms)were modified via dynamic melt mixing using 2 wt% benzoyl peroxide at 145℃ and 50 r/min for 30 min.The influence of SCB content on the processability and structure of the resulting products was systematically investigated.All modified products exhibited good melt processability with melt flow rates(MFR)ranging from 0.46 g/10min to 1.07 g/10min.Products derived from low-SCB LLDPEs showed a lower MFR,higher cross-linking content,a larger number of long-chain branches,and a higher degree of benzoyl grafting.In contrast,those produced from high-SCB LLDPEs exhibited improved processability,reduced cross-linking,fewer long-chain branches,and lower benzoyl grafting levels.A detailed structural investigation of the soluble and insoluble fractions,which were separated using trichlorobenzene fractionation,was conducted to analyze the structural features of various modified products and demonstrate that the SCB content(i.e.,tertiary carbon density)significantly influences radical coupling during dynamic modification.Elevated tertiary carbon density,by introducing greater steric hindrance,suppresses radical coupling during dynamic modification,thereby reducing the efficiency of both crosslinking and peroxide fragment grafting.These findings provide new insights into the structure-reactivity relationships in peroxide-induced polyethylene modification and lay the foundation for tailoring material properties via dynamic processing.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金financially supported by the National Natural Science Foundation of China(No.52204284)the China Postdoctoral Science Foundation(No.2025MD784125)+2 种基金the Natural Science Foundation of Shaanxi Province,China(No.2024JC-YBQN-0365)the Shaanxi Province Postdoctoral Science Foundation,China(No.2025BSHSDZZ363)Outstanding Youth Science Fund of Xi’an University of Science and Technology,China(No.202308)。
文摘Interfacial interactions between rough mineral particles have garnered considerable attention as they directly determine particle agglomeration and floatability.This study comprehensively investigates the agglomeration characteristics of siderite particles after argon(Ar)plasma surface modification through settling tests,flocs size measurements,and fractal dimension calculations.Ar plasma surface modification promotes the agglomeration of siderite particles,as evidenced by increased floc size and density.The agglomeration mechanism induced by Ar plasma surface modification is evaluated using a theoretical model combining the surface element integration(SEI)approach,differential geometry,and the composite Simpson's rule.Changes in surface roughness,wettability,and charge are considered in this model.Compared to the unpretreated siderite particles,the energy barrier for interaction of the 30-min Ar plasma-pretreated siderite particles decreases from 2.3×10-^(17)J to 1.6×10^(-17)J.This reduction provides strong evidence for the agglomeration behavior of siderite particles.Furthermore,flotation experiments confirm that Ar plasma surface modification is conducive to the aggregation flotation of siderite.These findings offer crucial insights into particle aggregation and dispersion behaviors,with notable application in mineral flotation.
基金Funded by the National Natural Science Foundation of China(No.52278446)。
文摘To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.
基金supported by the National Natural Science Foundation of China (52302259)the China Postdoctoral Science Foundation (CPSF) under Grant Number 2023M741479+4 种基金the Postdoctoral Fellowship Program of CPSF under Grant Number GZB20240280the Jiangxi Provincial Natural Science Foundation (20224ACB218006)the financial support from High-level Talent Research Special Funds of Jiangxi University of Science and Technology (Grant No. 205200100670)the Jiangxi Provincial Key Laboratory of Power Energy Storage Batteries and Materials (2024SSY10011)the Major Scientific and Technological Research R&D Special Project of Jiangxi Province(20244AFI92002)
文摘The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capacity of layered transition metal oxides;however,it also exacerbates the release of lattice oxygen and the contraction of the unit cell.Ternary materials are designed in a secondary particle state to meet the requirements of power battery applications.Therefore,to create ternary materials that can operate under ultrahigh voltages,attention should be given to both surface modification and particle integrity maintenance.By utilizing elemental selenium(Se)with a low melting point,easy sublimation,and multiple variable valence states,deep grain boundary modification was implemented inside the particles.The performance of the cathode material was evaluated through pouch cells,and the improvement mechanism was explored through molecular dynamics simulation calculations.Under the protection of a three-dimensional Se-rich modified layer,LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)achieved stable operation at ultrahigh voltages(4.6 V vs.Li/Li^(+));a sacrificial protection mechanism based on the chronic decomposition of the Se-rich layer was proposed to explain the efficacy of Se modification in stabilizing ternary materials.This deep grain boundary modification based on elemental Se provides a new solution for the ultrahigh-voltage operation of transition metal oxides and provides a scientific basis and technical support for solving the interface contact problem of all-solid-state batteries.
基金supported by the National Nature Science Foundation of China(62504130)National Key Research and Development Program of China(2018YFB0704100)+1 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong(Y01256331)the Technology Development Project of Henan Province(252102240047).
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
文摘In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.22334007).
文摘Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金financially sponsored by the National Natural Science Foundation of China(No.52204414)the National Energy-Saving and Low-Carbon Materials Production and Application Demonstration Platform Program,China(No.TC220H06N)+1 种基金the National Key R&D Program of China(No.2021YFC1910504)the Fundamental Research Funds for the Central Universities,China(No.FRFTP-20-097A1Z)。
文摘MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.
基金supported by grants from the Major Projects of Health Science Research Foundation for Middle-Aged and Young Scientist of Fujian Province,China,No.2022ZQNZD01010010the National Natural Science Foundation of China,No.82371390Fujian Province Scientific Foundation,No.2023J01725(all to XC).
文摘The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiquitous in the immune response of the central nervous system.The fat mass and obesity-related protein catalyzes the demethylation of N^(6)-methyladenosine modifications on mRNA and is widely expressed in various tissues,participating in the regulation of multiple diseases’biological processes.However,the role of fat mass and obesity in microglial activation and the subsequent neuroinflammatory response after traumatic brain injury is unclear.In this study,we found that the expression of fat mass and obesity was significantly down-regulated in both lipopolysaccharide-treated BV2 cells and a traumatic brain injury mouse model.After fat mass and obesity interference,BV2 cells exhibited a pro-inflammatory phenotype as shown by the increased proportion of CD11b^(+)/CD86^(+)cells and the secretion of pro-inflammatory cytokines.Fat mass and obesity-mediated N^(6)-methyladenosine demethylation accelerated the degradation of ADAM17 mRNA,while silencing of fat mass and obesity enhanced the stability of ADAM17 mRNA.Therefore,down-regulation of fat mass and obesity expression leads to the abnormally high expression of ADAM17 in microglia.These results indicate that the activation of microglia and neuroinflammatory response regulated by fat mass and obesity-related N^(6)-methyladenosine modification plays an important role in the pro-inflammatory process of secondary injury following traumatic brain injury.
基金supported by Applied Basic Research Joint Fund Project of Yunnan Province,No.202301AY070001-200Middle-aged Academic and Technical Training Project for High-Level Talents,No.202105AC160065+1 种基金Yunnan Clinical Medical Center for Neurological and Cardiovascular Diseases,No.YWLCYXZX2023300077Key Clinical Specialty of Neurology in Yunnan Province,No.300064(all to CL)。
文摘Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein abundance but are also primarily regulated by various post-translational protein modifications.Lactate,once considered merely a byproduct of anaerobic metabolism,has emerged as a crucial energy substrate and signaling molecule involved in both physiological and pathological processes within the nervous system.Furthermore,recent studies have emphasized the significant role of lactate in numerous neurological diseases,including Alzheimer's disease,Parkinson's disease,acute cerebral ischemic stroke,multiple sclerosis,Huntington's disease,and myasthenia gravis.The purpose of this review is to synthesize the current research on lactate and lactylation modifications in neurological diseases,aiming to clarify their mechanisms of action and identify potential therapeutic targets.As such,this work provides an overview of the metabolic regulatory roles of lactate in various disorders,emphasizing its involvement in the regulation of brain function.Additionally,the specific mechanisms of brain lactate metabolism are discussed,suggesting the unique roles of lactate in modulating brain function.As a critical aspect of lactate function,lactylation modifications,including both histone and non-histone lactylation,are explored,with an emphasis on recent advancements in identifying the key regulatory enzymes of such modifications,such as lactylation writers and erasers.The effects and specific mechanisms of abnormal lactate metabolism in diverse neurological diseases are summarized,revealing that lactate acts as a signaling molecule in the regulation of brain functions and that abnormal lactate metabolism is implicated in the progression of various neurological disorders.Future research should focus on further elucidating the molecular mechanisms underlying lactate and lactylation modifications and exploring their potential as therapeutic targets for neurological diseases.
基金supported by the National Natural Science Foundation of China,No.22103055(to JG)the Natural Science Foundation of Hebei Province,No.F2024110001(to HC)Open Project of Tianjin Key Laboratory of Optoelectronic Detection Technology and System,Nos.2024LODTS215(to NL),2024LODTS216(to XS).
文摘In recent years,exosomes have garnered extensive attention as therapeutic agents and early diagnostic markers in neurodegenerative disease research.Exosomes are small and can effectively cross the blood-brain barrier,allowing them to target deep brain lesions.Recent studies have demonstrated that exosomes derived from different cell types may exert therapeutic effects by regulating the expression of various inflammatory cytokines,mRNAs,and disease-related proteins,thereby halting the progression of neurodegenerative diseases and exhibiting beneficial effects.However,exosomes are composed of lipid bilayer membranes and lack the ability to recognize specific target cells.This limitation can lead to side effects and toxicity when they interact with non-specific cells.Growing evidence suggests that surface-modified exosomes have enhanced targeting capabilities and can be used as targeted drug-delivery vehicles that show promising results in the treatment of neurodegenerative diseases.In this review,we provide an up-to-date overview of existing research aimed at devising approaches to modify exosomes and elucidating their therapeutic potential in neurodegenerative diseases.Our findings indicate that exosomes can efficiently cross the blood-brain barrier to facilitate drug delivery and can also serve as early diagnostic markers for neurodegenerative diseases.We introduce the strategies being used to enhance exosome targeting,including genetic engineering,chemical modifications(both covalent,such as click chemistry and metabolic engineering,and non-covalent,such as polyvalent electrostatic and hydrophobic interactions,ligand-receptor binding,aptamer-based modifications,and the incorporation of CP05-anchored peptides),and nanomaterial modifications.Research into these strategies has confirmed that exosomes have significant therapeutic potential for neurodegenerative diseases.However,several challenges remain in the clinical application of exosomes.Improvements are needed in preparation,characterization,and optimization methods,as well as in reducing the adverse reactions associated with their use.Additionally,the range of applications and the safety of exosomes require further research and evaluation.
