Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up ...Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up table that contains the optical properties of five hydrometeor types—rain,cloud water,cloud ice,graupel,and snow—for the Advanced Radiative Transfer Modeling System(ARMS)at frequencies below 220 GHz.The discrete dipole approximation(DDA)method is employed to compute the single-scattering properties of solid cloud particles,modeling these particles as aggregated roughened bullet rosettes.The bulk optical properties of the cloud layer are derived by integrating the singlescattering properties with a modified Gamma size distribution,specifically for distributions with 18 effective radii.The bulk phase function is then projected onto a series of generalized spherical functions,applying the delta-M method for truncation.The results indicate that simulations using the newly developed nonspherical scattering look-up table exhibit significant consistency with observations under deep convection conditions.In contrast,assuming spherical solid cloud particles leads to excessive scattering at mid-frequency channels and insufficient scattering at high-frequency channels.This improvement in radiative transfer simulation accuracy for cloudy conditions will better support the assimilation of allsky microwave observations into numerical weather prediction models.·Frozen cloud particles were modeled as aggregates of bullet rosettes and the optical properties at microwave range were computed by DDA.·A complete process and technical details for constructing a look-up table of ARMS are provided.·The ARMS simulations generally show agreement with observations of MWTS and MWHS under typhoon conditions using the new look-up table.展开更多
The newly developed Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System is applied to investigate typhoon-ocean interactions in this study. The COAWST modeling system represents the state-of-the-a...The newly developed Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System is applied to investigate typhoon-ocean interactions in this study. The COAWST modeling system represents the state-of-the-art numerical simulation technique comprising several coupled models to study coastal and environmental processes. The modeling system is applied to simulate Typhoon Muifa(2011), which strengthened from a tropical storm to a super typhoon in the Northwestern Pacific, to explore the heat fluxes exchanged among the processes simulated using the atmosphere model WRF, ocean model ROMS and wave model SWAN. These three models adopted the same horizontal grid. Three numerical experiments with different coupling configurations are performed in order to investigate the impact of typhoon-ocean interaction on the intensity and ocean response to typhoon. The simulated typhoon tracks and intensities agree with observations. Comparisons of the simulated variables with available atmospheric and oceanic observations show the good performance of using the coupled modeling system for simulating the ocean and atmosphere processes during a typhoon event. The fully coupled simulation that includes a ocean model identifies a decreased SST as a result of the typhoon-forced entrainment. Typhoon intensity and wind speed are reduced due to the decrease of the sea surface temperature when using a coupled ocean model. The experiments with ocean coupled to atmosphere also results in decreased sea surface heat flux and air temperature. The heat flux decreases by about 29% compared to the WRF only case. The reduction of the energy induced by SST decreases, resulting in weakening of the typhoon. Coupling of the waves to the atmosphere and ocean model induces a slight increase of SST in the typhoon center area with the ocean-atmosphere interaction increased as a result of wave feedback to atmosphere.展开更多
The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(Ca...The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(California Meteorological Model,CALMET) with 100-m horizontal spacing was driven with outputs from the Weather Research and Forecasting(WRF) model to obtain near-surface winds for the 1-year period from 12 September 2003 to 11 September 2004.Results were compared with wind observations at four sites.Traditional statistical scores,including correlation coefficients,standard deviations(SDs) and mean absolute errors(MAEs),indicate that the wind estimates from the WRF/CALMET modeling system are produced reasonably well.The correlation coefficients are relatively large,ranging from 0.5 to 0.7 for the zonal wind component and from 0.75 to 0.85 for the meridional wind component.MAEs for wind speed range from 1.5 to 2.0 m s-1 at 10 meters above ground level(AGL) and from 2.0 to 2.5 m s-1 at 60 m AGL.MAEs for wind direction range from 30 to 40 degrees at both levels.A spectral decomposition of the time series of wind speed shows positive impacts of CALMET in improving the mesoscale winds.Moreover,combining the CALMET model with WRF significantly improves the spatial variability of the simulated wind fields.It can be concluded that the WRF/CALMET modeling system is capable of providing a detailed near-surface wind field,but the physics in the diagnostic CALMET model needs to be further improved.展开更多
The ensemble optimal interpolation （EnOI） is applied to the regional ocean modeling system （ROMS） with the ability to assimilate the along-track sea level anomaly （TSLA）. This system is tested with an eddy-resol...The ensemble optimal interpolation （EnOI） is applied to the regional ocean modeling system （ROMS） with the ability to assimilate the along-track sea level anomaly （TSLA）. This system is tested with an eddy-resolving system of the South China Sea （SCS）. Background errors are derived from a running seasonal ensemble to account for the seasonal variability within the SCS. A fifth-order localization function with a 250 km localization radius is chosen to reduce the negative effects of sampling errors. The data assimilation system is tested from January 2004 to December 2006. The results show that the root mean square deviation （RMSD） of the sea level anomaly decreased from 10.57 to 6.70 cm, which represents a 36.6% reduction of error. The data assimilation reduces error for temperature within the upper 800 m and for salinity within the upper 200 m, although error degrades slightly at deeper depths. Surface currents are in better agreement with trajectories of surface drifters after data assimilation. The variance of sea level improves significantly in terms of both the amplitude and position of the strong and weak variance regions after assimilating TSLA. Results with AGE error （AGE） perform better than no AGE error （NoAGE） when considering the improvements of the temperature and the salinity. Furthermore, reasons for the extremely strong variability in the northern SCS in high resolution models are investigated. The results demonstrate that the strong variability of sea level in the high resolution model is caused by an extremely strong Kuroshio intrusion. Therefore, it is demonstrated that it is necessary to assimilate the TSLA in order to better simulate the SCS with high resolution models.展开更多
A down-scaled operational oceanographic system is developed for the coastal waters of Korea using a re- gional ocean modeling system （ROMS）. The operational oceanographic modeling system consists of at- mospheric an...A down-scaled operational oceanographic system is developed for the coastal waters of Korea using a re- gional ocean modeling system （ROMS）. The operational oceanographic modeling system consists of at- mospheric and hydrodynamic models. The hydrodynamic model, ROMS, is coupled with wave, sediment transport, and water quality modules. The system forecasts the predicted results twice a day on a 72 h basis, including sea surface elevation, currents, temperature, salinity, storm surge height, and wave information for the coastal waters of Korea. The predicted results are exported to the web-GIS-based coastal informa- tion system for real-time dissemination to the public and validation with real-time monitoring data using visualization technologies. The ROMS is two-way coupled with a simulating waves nearshore model, SWAN, for the hydrodynamics and waves, nested with the meteorological model, WRE for the atmospheric surface forcing, and externally nested with the eutrophication model, CE-QUAL-ICM, for the water quality. The op- erational model, ROMS, was calibrated with the tidal surface observed with a tide-gage and verified with current data observed by bottom-mounted ADCP or AWAC near the coastal waters of Korea. To validate the predicted results, we used real-time monitoring data derived from remote buoy system, HF-radar, and geostationary ocean color imager （GOCI）. This down-scaled operational coastal forecasting system will be used as a part of the Korea operational oceanographic system （KOOS） with other operational oceanographic systems.展开更多
The northern South China Sea(SCS) is frequently affected by typhoons. During severe storm events, wave-current interactions produce storm surges causing enormous damage in the path of the typhoon. To evaluate the infl...The northern South China Sea(SCS) is frequently affected by typhoons. During severe storm events, wave-current interactions produce storm surges causing enormous damage in the path of the typhoon. To evaluate the influence of wave-current interactions on storm surge, we used a coupled ocean-atmospherewave-sediment transport(COAWST) modeling system with radiation-stress and vortex-force formulations to simulate two typically intense tropical storms that invaded the SCS, namely Typhoons Nuri(2008) and Hagupit(2008), and compared results with observations from the Hong Kong Observatory. Both radiationstress and vortex-force formulations significantly improved the accuracy of the simulation. Depending on which typhoon and the topography encountered, the influence of surface waves on the oceanic circulation showed different characteristics, including the differences of range and intensity of storm surge between vortex-force and radiation-stress experiments. During typhoon landing, strong sea-surface elevation in concert with wave set-up/set-down caused the adjustment of the momentum balance. In the direction perpendicular to the current, but especially in the cross-shore direction, the pressure gradient and wave effects on the current dominated the momentum balance.展开更多
According to the necessity of flexible workflow management system, the solution to set up the visualized workflow modelling system based on B/S structure is put forward, which conforms to the relevant specifications o...According to the necessity of flexible workflow management system, the solution to set up the visualized workflow modelling system based on B/S structure is put forward, which conforms to the relevant specifications of WfMC and the workflow process definition meta-model. The design for system structure is presented in detail, and the key technologies for system implementation are also introduced. Additionally, an example is illustrated to demonstrate the validity of system.展开更多
Arbitrary topological curve network has no restriction in topology structure,so it has more powerful representing ability in defining complex surfaces.A complex surface modeling system is presented based on arbitrary ...Arbitrary topological curve network has no restriction in topology structure,so it has more powerful representing ability in defining complex surfaces.A complex surface modeling system is presented based on arbitrary topological curve network and the improved combined subdivision method,its functions including creating and editing curve network,and generating and modifying curve network＇s interpolated surface.This modeling system can be used to the process of products＇concept design,and its applications is also significant to the development of subdivision method.展开更多
In the past decades,physical modeling has been widely used in hydrogeology for teaching,studying and exhibition purposes.Most of these models are used to illustrate hydrogeological profiles,but few can depict three-di...In the past decades,physical modeling has been widely used in hydrogeology for teaching,studying and exhibition purposes.Most of these models are used to illustrate hydrogeological profiles,but few can depict three-dimensional groundwater flows,making it impossible to validate groundwater flows simulated by numerical methods with physical modeling.展开更多
Considering the urban characteristics, a customized multi-scale numerical modeling system is established to simulate the urban meteorological environment. The system mainly involves three spatial scales: the urban sca...Considering the urban characteristics, a customized multi-scale numerical modeling system is established to simulate the urban meteorological environment. The system mainly involves three spatial scales: the urban scale, urban sub-domain scale, and single to few buildings scale. In it, different underlying surface types are employed, the building drag factor is used to replace its roughness in the influence on the urban wind field, the effects of building distribution, azimuth and screening of shortwave radiation are added, and the influence of anthropogenic heating is also taken into account. All the numerical tests indicate that the simulated results are reasonably in agreement with the observational data, so the system can be used to simulate the urban meteorological environment. Making use of it, the characteristics of the meteorological environment from the urban to urban sub-domain scales, even the among-buildings scale, can be recognized. As long as the urban planning scheme is given, the corresponding simulated results can be obtained so as to meet the need of optimizing urban planning.展开更多
The regional hydrological system is extremely complex because it is affected not only by physical factors but also by human dimensions.And the hydrological models play a very important role in simulating the complex s...The regional hydrological system is extremely complex because it is affected not only by physical factors but also by human dimensions.And the hydrological models play a very important role in simulating the complex system.However,there have not been effective methods for the model reliability and uncertainty analysis due to its complexity and difficulty.The uncertainties in hydrological modeling come from four important aspects：uncertainties in input data and parameters,uncertainties in model structure,uncertainties in analysis method and the initial and boundary conditions.This paper systematically reviewed the recent advances in the study of the uncertainty analysis approaches in the large-scale complex hydrological model on the basis of uncertainty sources.Also,the shortcomings and insufficiencies in the uncertainty analysis for complex hydrological models are pointed out.And then a new uncertainty quantification platform PSUADE and its uncertainty quantification methods were introduced,which will be a powerful tool and platform for uncertainty analysis of large-scale complex hydrological models.Finally,some future perspectives on uncertainty quantification are put forward.展开更多
We applied the model of American Meteorological Society-Environmental Protection Agency Regulatory Model（AERMOD） as a tool for the analysis of nitrogen dioxide（NO2） emissions from a cement complex as a part of the...We applied the model of American Meteorological Society-Environmental Protection Agency Regulatory Model（AERMOD） as a tool for the analysis of nitrogen dioxide（NO2） emissions from a cement complex as a part of the environmental impact assessment.The dispersion of NO2 from four cement plants within the selected cement complex were investigated both by measurement and AERMOD simulation in dry and wet seasons.Simulated values of NO2 emissions were compared with those obtained during a 7-day continuous measurement campaign at 12 receptors.It was predicted that NO2 concentration peaks were found more within 1 to 5 km,where the measurement and simulation were in good agreement,than at the receptors 5 km further away from the reference point.The QuantileQuantile plots of NO2 concentrations in dry season were mostly fitted to the middle line compared to those in wet season.This can be attributed to high NO2 wet deposition.The results show that for both the measurement and the simulation using the AERMOD,NO2 concentrations do not exceed the NO2 concentration limit set by the National Ambient Air Quality Standards（NAAQS） of Thailand.This indicates that NO2 emissions from the cement complex have no significant impact on nearby communities.It can be concluded that the AERMOD can provide useful information to identify high pollution impact areas for the EIA guidelines.展开更多
Based on feature modeling and mathematical analysis methods,a process-oriented and modular parametric design system for advanced turbine cooling blade is developed with UG API,aiming at the structural complexity and h...Based on feature modeling and mathematical analysis methods,a process-oriented and modular parametric design system for advanced turbine cooling blade is developed with UG API,aiming at the structural complexity and high design difficulty of aero-engine cooling turbine blade.The relationship between the external and internal body features,the body attached feature is analyzed as viewed from the feature and parameter terms.The parametric design processes and design examples of the external body shape,tenon,platform and internal body shape,ribs,pin fins are introduced.The system improves the design efficiency of cooling turbine blade and establishes the foundation of multidisciplinary design optimization procedure for it.展开更多
This paper proposes an approach of developing the feature based parametric product modeling system which is suitable for integrated engineering design in CIMS environment.The architecture of ZD--MCADII and the charact...This paper proposes an approach of developing the feature based parametric product modeling system which is suitable for integrated engineering design in CIMS environment.The architecture of ZD--MCADII and the characteristics of its each module are introduced in detail. ZD--MCADII’s product data is managed by an object--oriented database management system OSCAR, and the product model is built according to the standard STEP. The product design is established on a unified product model, and all the product data are globally associated in ZD--MCADII. ZD--MCADII provides various design features to facilitate the product design, and supports the integrity of CAD, CAPP and CAM.展开更多
This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streaml...This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_（2.5） attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_（2.5） to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition（SMAT-CE）,and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta（YRD） in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality（CMAQ） model simulation results with maximum mean normalized error 〈 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_（2.5） in January and August（e.g.,more than50%contributed by primary emissions in Shanghai）,and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China＇s annual PM_（2.5）National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_（2.5）（and potentially O_3 as well） and streamline air quality data for SMAT-CE to perform attainment assessments.展开更多
A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation su...A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation subsystem. A non-contact measurement method based on digital image processing is introduced to improve measurement of specimen deformation. Based on the method, a series of conventional tri-axial compression tests under diverse stress paths are done. Then an elasto-plastic constitutive model of soil is acquired through the numerical method of modeling constitutive law for geomaterial. Two examples of specimen deformation and ground subsidence are presented and discussed. It indicated that this method can rationally simulate the stress-strain relationship of soil, which reflects the effect of stress path on soil stress-strain relationship.展开更多
One of the most important causes of the freshwater shortage in estuarine area is the increasing seawater intrusion into the river.To simulate seawater intrusion properly,two important factors should be considered.One ...One of the most important causes of the freshwater shortage in estuarine area is the increasing seawater intrusion into the river.To simulate seawater intrusion properly,two important factors should be considered.One is the bidirectional and time-dependent coupling effects between river discharges and tidal forces.The other is the three-dimensional and stratified structure of dynamic processes involved.However,these two factors have rarely been investigated simultaneously,or they were often simplified in previous researches,especially for the estuary connected with an upstream river network through multiple outlets such as the Pearl River Estuary(PRE).In order to consider these two factors,a numerical modeling system,which couples a one-dimensional river network model with a three-dimensional unstructured-grid Finite-Volume Coastal Ocean Model(FVCOM),has been developed and successfully applied to the simulation of seawater intrusion into rivers emptying into the PRE.By treating the river network with a one-dimensional model,computational efficiency has been improved.With coupling 1D and 3D models,the specification of upstream boundary conditions becomes more convenient.Simulated results are compared with field measured data.Good agreement indicates that the modeling system may correctly capture the physical processes of seawater intrusion into rivers.展开更多
One of the key problems in collaborative geometric modeling systems is topological entity correspondence when topolog- ical structure of geometry models on collaborative sites changes, ha this article, we propose a so...One of the key problems in collaborative geometric modeling systems is topological entity correspondence when topolog- ical structure of geometry models on collaborative sites changes, ha this article, we propose a solution for tracking topological entity alterations in 3D collaborative modeling environment. We firstly make a thorough analysis and detailed categorization on the altera- tion properties and causations for each type of topological entity, namely topological face and topological edge. Based on collabora- tive topological entity naming mechanism, a data structure called TEST （Topological Entity Structure Tree） is introduced to track the changing history and current state of each topological entity, to embody the relationship among topological entities. Rules and algo- rithms are presented for identification of topological entities referenced by operations for correct execution and model consistency. The algorithm has been verified within the prototype we have implemented with ACIS.展开更多
The BGHMS system described in this paper was designed to model the geohistory for cratonic basins and written in turbo BASIC language with a user-friendly interface for data inputs and outputs on IBM PC-compatible com...The BGHMS system described in this paper was designed to model the geohistory for cratonic basins and written in turbo BASIC language with a user-friendly interface for data inputs and outputs on IBM PC-compatible computers. The major mathematical models in this system include the models of compaction correction. unconformity restoration. sea-level change and paleo-water-depth correction. and tectonic subsidence modeling. Two geological events of sediment compaction and erosion are considered in this system. It consists of three modules for data input, geohistory modeling and graph conversion and output. containing more than twenty subroutine programs, is an easy-to-use. menu-driven program system with many obvious advantages, and is a useful tool for hydrocarbon geologists to make quantitative studies on geohistory and to make exploration decisions in regional evaluation.展开更多
Accurate modeling of urban climate is essential to predict potential environmental risks in cities.Urban datasets,such as urban land use and urban canopy parameters(UCPs),are key input data for urban climate models an...Accurate modeling of urban climate is essential to predict potential environmental risks in cities.Urban datasets,such as urban land use and urban canopy parameters(UCPs),are key input data for urban climate models and largely affect their performance.However,access to reliable urban datasets is a challenge,especially in fast urbanizing countries.In this study,we developed a high-resolution national urban dataset in China(NUDC)for the WRF/urban modeling system and evaluated its effect on urban climate modeling.Specifically,an optimization method based on building morphology was proposed to classify urban land use types.The key UCPs,including building height and width,street width,surface imperviousness,and anthropogenic heat flux,were calculated for both single-layer Urban Canopy Model(UCM)and multiple-layer Building Energy Parameterization(BEP).The results show that the derived morphological-based urban land use classification could better reflect the urban characteristics,compared to the socioeconomic-function-based classification.The UCPs varied largely in spatial within and across the cities.The integration of the developed urban land use and UCPs datasets significantly improved the representation of urban canopy characteristics,contributing to a more accurate modeling of near-surface air temperature,humidity,and wind in urban areas.The UCM performed better in the modeling of air temperature and humidity,while the BEP performed better in the modeling of wind speed.The newly developed NUDC can advance the study of urban climate and improve the prediction of potential urban environmental risks in China.展开更多
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB3900400)the National Natural Science Foundation of China(Grant Nos.U2142212 and 42361074)。
文摘Accurate satellite data assimilation under all-sky conditions requires enhanced parameterization of scattering properties for frozen hydrometeors in clouds.This study aims to develop a nonspherical scattering look-up table that contains the optical properties of five hydrometeor types—rain,cloud water,cloud ice,graupel,and snow—for the Advanced Radiative Transfer Modeling System(ARMS)at frequencies below 220 GHz.The discrete dipole approximation(DDA)method is employed to compute the single-scattering properties of solid cloud particles,modeling these particles as aggregated roughened bullet rosettes.The bulk optical properties of the cloud layer are derived by integrating the singlescattering properties with a modified Gamma size distribution,specifically for distributions with 18 effective radii.The bulk phase function is then projected onto a series of generalized spherical functions,applying the delta-M method for truncation.The results indicate that simulations using the newly developed nonspherical scattering look-up table exhibit significant consistency with observations under deep convection conditions.In contrast,assuming spherical solid cloud particles leads to excessive scattering at mid-frequency channels and insufficient scattering at high-frequency channels.This improvement in radiative transfer simulation accuracy for cloudy conditions will better support the assimilation of allsky microwave observations into numerical weather prediction models.·Frozen cloud particles were modeled as aggregates of bullet rosettes and the optical properties at microwave range were computed by DDA.·A complete process and technical details for constructing a look-up table of ARMS are provided.·The ARMS simulations generally show agreement with observations of MWTS and MWHS under typhoon conditions using the new look-up table.
基金supported by the Public Science and Technology Research Funds Projects of Ocean 201105018the National Natural Science Foundation of China 41106023
文摘The newly developed Coupled Ocean-Atmosphere-Wave-Sediment Transport(COAWST) Modeling System is applied to investigate typhoon-ocean interactions in this study. The COAWST modeling system represents the state-of-the-art numerical simulation technique comprising several coupled models to study coastal and environmental processes. The modeling system is applied to simulate Typhoon Muifa(2011), which strengthened from a tropical storm to a super typhoon in the Northwestern Pacific, to explore the heat fluxes exchanged among the processes simulated using the atmosphere model WRF, ocean model ROMS and wave model SWAN. These three models adopted the same horizontal grid. Three numerical experiments with different coupling configurations are performed in order to investigate the impact of typhoon-ocean interaction on the intensity and ocean response to typhoon. The simulated typhoon tracks and intensities agree with observations. Comparisons of the simulated variables with available atmospheric and oceanic observations show the good performance of using the coupled modeling system for simulating the ocean and atmosphere processes during a typhoon event. The fully coupled simulation that includes a ocean model identifies a decreased SST as a result of the typhoon-forced entrainment. Typhoon intensity and wind speed are reduced due to the decrease of the sea surface temperature when using a coupled ocean model. The experiments with ocean coupled to atmosphere also results in decreased sea surface heat flux and air temperature. The heat flux decreases by about 29% compared to the WRF only case. The reduction of the energy induced by SST decreases, resulting in weakening of the typhoon. Coupling of the waves to the atmosphere and ocean model induces a slight increase of SST in the typhoon center area with the ocean-atmosphere interaction increased as a result of wave feedback to atmosphere.
基金National Public Benefit Research Foundation of China (2008416048GYHY201006035)
文摘The results from a hybrid approach that combines a mesoscale meteorological model with a diagnostic model to produce high-resolution wind fields in complex coastal topography are evaluated.The diagnostic wind model(California Meteorological Model,CALMET) with 100-m horizontal spacing was driven with outputs from the Weather Research and Forecasting(WRF) model to obtain near-surface winds for the 1-year period from 12 September 2003 to 11 September 2004.Results were compared with wind observations at four sites.Traditional statistical scores,including correlation coefficients,standard deviations(SDs) and mean absolute errors(MAEs),indicate that the wind estimates from the WRF/CALMET modeling system are produced reasonably well.The correlation coefficients are relatively large,ranging from 0.5 to 0.7 for the zonal wind component and from 0.75 to 0.85 for the meridional wind component.MAEs for wind speed range from 1.5 to 2.0 m s-1 at 10 meters above ground level(AGL) and from 2.0 to 2.5 m s-1 at 60 m AGL.MAEs for wind direction range from 30 to 40 degrees at both levels.A spectral decomposition of the time series of wind speed shows positive impacts of CALMET in improving the mesoscale winds.Moreover,combining the CALMET model with WRF significantly improves the spatial variability of the simulated wind fields.It can be concluded that the WRF/CALMET modeling system is capable of providing a detailed near-surface wind field,but the physics in the diagnostic CALMET model needs to be further improved.
基金The Major State Basic Research Development Program of China under contract Nos 201-1CB403606 and 2011CB403500the National Natural Science Foundation of China under contract Nos 41222038,41076011and 41206023the National Marine Environmental Forecasting Center Operational Development Foundation of the State Oceanic Administration of China under contract No.2013002
文摘The ensemble optimal interpolation （EnOI） is applied to the regional ocean modeling system （ROMS） with the ability to assimilate the along-track sea level anomaly （TSLA）. This system is tested with an eddy-resolving system of the South China Sea （SCS）. Background errors are derived from a running seasonal ensemble to account for the seasonal variability within the SCS. A fifth-order localization function with a 250 km localization radius is chosen to reduce the negative effects of sampling errors. The data assimilation system is tested from January 2004 to December 2006. The results show that the root mean square deviation （RMSD） of the sea level anomaly decreased from 10.57 to 6.70 cm, which represents a 36.6% reduction of error. The data assimilation reduces error for temperature within the upper 800 m and for salinity within the upper 200 m, although error degrades slightly at deeper depths. Surface currents are in better agreement with trajectories of surface drifters after data assimilation. The variance of sea level improves significantly in terms of both the amplitude and position of the strong and weak variance regions after assimilating TSLA. Results with AGE error （AGE） perform better than no AGE error （NoAGE） when considering the improvements of the temperature and the salinity. Furthermore, reasons for the extremely strong variability in the northern SCS in high resolution models are investigated. The results demonstrate that the strong variability of sea level in the high resolution model is caused by an extremely strong Kuroshio intrusion. Therefore, it is demonstrated that it is necessary to assimilate the TSLA in order to better simulate the SCS with high resolution models.
基金The project entitled Cooperation on the Development of Basic Technologies for the Yellow Sea and East China Sea Operational Oceanographic System funded by the China-Korea Joint Ocean Research Centerthe project entitled"Development of Korea Operational Oceanographic System"funded by the Ministry of Oceans and Fisheries,Koreathe project Functional Improvement of Korea Ocean Satellite Center and Development of the Marine Environment Impact Prediction Program funded by the Korea Institute of Ocean Science and Technology
文摘A down-scaled operational oceanographic system is developed for the coastal waters of Korea using a re- gional ocean modeling system （ROMS）. The operational oceanographic modeling system consists of at- mospheric and hydrodynamic models. The hydrodynamic model, ROMS, is coupled with wave, sediment transport, and water quality modules. The system forecasts the predicted results twice a day on a 72 h basis, including sea surface elevation, currents, temperature, salinity, storm surge height, and wave information for the coastal waters of Korea. The predicted results are exported to the web-GIS-based coastal informa- tion system for real-time dissemination to the public and validation with real-time monitoring data using visualization technologies. The ROMS is two-way coupled with a simulating waves nearshore model, SWAN, for the hydrodynamics and waves, nested with the meteorological model, WRE for the atmospheric surface forcing, and externally nested with the eutrophication model, CE-QUAL-ICM, for the water quality. The op- erational model, ROMS, was calibrated with the tidal surface observed with a tide-gage and verified with current data observed by bottom-mounted ADCP or AWAC near the coastal waters of Korea. To validate the predicted results, we used real-time monitoring data derived from remote buoy system, HF-radar, and geostationary ocean color imager （GOCI）. This down-scaled operational coastal forecasting system will be used as a part of the Korea operational oceanographic system （KOOS） with other operational oceanographic systems.
基金Supported by the National Key Research and Development Program of China(No.2016YFC1402000)the National Natural Science Foundation of China(Nos.41376027,U1133001,41606024)+3 种基金the National Program on Global Change and Air-Sea Interaction(No.GASI-IPOVAI-01-06)the NSFC-Shandong Joint Fund for Marine Science Research Centers(No.U1406401)the NSFC Innovative Group Grant Project(No.41421005)the High Performance Computing Environment Qingdao Branch of Chinese Academy of Science(CAS)
文摘The northern South China Sea(SCS) is frequently affected by typhoons. During severe storm events, wave-current interactions produce storm surges causing enormous damage in the path of the typhoon. To evaluate the influence of wave-current interactions on storm surge, we used a coupled ocean-atmospherewave-sediment transport(COAWST) modeling system with radiation-stress and vortex-force formulations to simulate two typically intense tropical storms that invaded the SCS, namely Typhoons Nuri(2008) and Hagupit(2008), and compared results with observations from the Hong Kong Observatory. Both radiationstress and vortex-force formulations significantly improved the accuracy of the simulation. Depending on which typhoon and the topography encountered, the influence of surface waves on the oceanic circulation showed different characteristics, including the differences of range and intensity of storm surge between vortex-force and radiation-stress experiments. During typhoon landing, strong sea-surface elevation in concert with wave set-up/set-down caused the adjustment of the momentum balance. In the direction perpendicular to the current, but especially in the cross-shore direction, the pressure gradient and wave effects on the current dominated the momentum balance.
基金Shanghai Municipal Science Committee key project(061612058,06JC14066,06DZ12001,061111006)Nationalscience and technology supporting project(2006BAF01A46)
文摘According to the necessity of flexible workflow management system, the solution to set up the visualized workflow modelling system based on B/S structure is put forward, which conforms to the relevant specifications of WfMC and the workflow process definition meta-model. The design for system structure is presented in detail, and the key technologies for system implementation are also introduced. Additionally, an example is illustrated to demonstrate the validity of system.
基金Project supported by the Fundamental Research Foundations for the Central Universities (Grant No.2009B30514)
文摘Arbitrary topological curve network has no restriction in topology structure,so it has more powerful representing ability in defining complex surfaces.A complex surface modeling system is presented based on arbitrary topological curve network and the improved combined subdivision method,its functions including creating and editing curve network,and generating and modifying curve network＇s interpolated surface.This modeling system can be used to the process of products＇concept design,and its applications is also significant to the development of subdivision method.
基金supported by the State Key Program of National Natural Science of China(Grant No.41130637)
文摘In the past decades,physical modeling has been widely used in hydrogeology for teaching,studying and exhibition purposes.Most of these models are used to illustrate hydrogeological profiles,but few can depict three-dimensional groundwater flows,making it impossible to validate groundwater flows simulated by numerical methods with physical modeling.
基金sponsored by the Key Project(96-920-34-07)of the Ministry of Science and Technology,Chinathe Nationa1 Natura1 Science Foundation of China(40333027).
文摘Considering the urban characteristics, a customized multi-scale numerical modeling system is established to simulate the urban meteorological environment. The system mainly involves three spatial scales: the urban scale, urban sub-domain scale, and single to few buildings scale. In it, different underlying surface types are employed, the building drag factor is used to replace its roughness in the influence on the urban wind field, the effects of building distribution, azimuth and screening of shortwave radiation are added, and the influence of anthropogenic heating is also taken into account. All the numerical tests indicate that the simulated results are reasonably in agreement with the observational data, so the system can be used to simulate the urban meteorological environment. Making use of it, the characteristics of the meteorological environment from the urban to urban sub-domain scales, even the among-buildings scale, can be recognized. As long as the urban planning scheme is given, the corresponding simulated results can be obtained so as to meet the need of optimizing urban planning.
基金National Key Basic Research Program of China,No.2010CB428403National Grand Science and Technology Special Project of Water Pollution Control and Improvement,No.2009ZX07210-006
文摘The regional hydrological system is extremely complex because it is affected not only by physical factors but also by human dimensions.And the hydrological models play a very important role in simulating the complex system.However,there have not been effective methods for the model reliability and uncertainty analysis due to its complexity and difficulty.The uncertainties in hydrological modeling come from four important aspects：uncertainties in input data and parameters,uncertainties in model structure,uncertainties in analysis method and the initial and boundary conditions.This paper systematically reviewed the recent advances in the study of the uncertainty analysis approaches in the large-scale complex hydrological model on the basis of uncertainty sources.Also,the shortcomings and insufficiencies in the uncertainty analysis for complex hydrological models are pointed out.And then a new uncertainty quantification platform PSUADE and its uncertainty quantification methods were introduced,which will be a powerful tool and platform for uncertainty analysis of large-scale complex hydrological models.Finally,some future perspectives on uncertainty quantification are put forward.
基金the Royal Golden Jubilee Ph.D program (IUG50K0021)Thailand Research Fund (TRF) for the financial support
文摘We applied the model of American Meteorological Society-Environmental Protection Agency Regulatory Model（AERMOD） as a tool for the analysis of nitrogen dioxide（NO2） emissions from a cement complex as a part of the environmental impact assessment.The dispersion of NO2 from four cement plants within the selected cement complex were investigated both by measurement and AERMOD simulation in dry and wet seasons.Simulated values of NO2 emissions were compared with those obtained during a 7-day continuous measurement campaign at 12 receptors.It was predicted that NO2 concentration peaks were found more within 1 to 5 km,where the measurement and simulation were in good agreement,than at the receptors 5 km further away from the reference point.The QuantileQuantile plots of NO2 concentrations in dry season were mostly fitted to the middle line compared to those in wet season.This can be attributed to high NO2 wet deposition.The results show that for both the measurement and the simulation using the AERMOD,NO2 concentrations do not exceed the NO2 concentration limit set by the National Ambient Air Quality Standards（NAAQS） of Thailand.This indicates that NO2 emissions from the cement complex have no significant impact on nearby communities.It can be concluded that the AERMOD can provide useful information to identify high pollution impact areas for the EIA guidelines.
文摘Based on feature modeling and mathematical analysis methods,a process-oriented and modular parametric design system for advanced turbine cooling blade is developed with UG API,aiming at the structural complexity and high design difficulty of aero-engine cooling turbine blade.The relationship between the external and internal body features,the body attached feature is analyzed as viewed from the feature and parameter terms.The parametric design processes and design examples of the external body shape,tenon,platform and internal body shape,ribs,pin fins are introduced.The system improves the design efficiency of cooling turbine blade and establishes the foundation of multidisciplinary design optimization procedure for it.
文摘This paper proposes an approach of developing the feature based parametric product modeling system which is suitable for integrated engineering design in CIMS environment.The architecture of ZD--MCADII and the characteristics of its each module are introduced in detail. ZD--MCADII’s product data is managed by an object--oriented database management system OSCAR, and the product model is built according to the standard STEP. The product design is established on a unified product model, and all the product data are globally associated in ZD--MCADII. ZD--MCADII provides various design features to facilitate the product design, and supports the integrity of CAD, CAPP and CAM.
基金Financial support and data source for this work is provided by the US Environmental Protection Agency(No.OR13810-001.04 A10-0223-S001-A02)Guangzhou Environmental Protection Bureau(No.x2hj B2150020)+4 种基金the project of an integrated modeling and filed observational verification on the deposition of typical industrial point-source mercury emissions in the Pearl River Deltapartly supported by the funding of Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control(No.2011A060901011)the project of Atmospheric Haze Collaboration Control Technology Design(No.XDB05030400)from the Chinese Academy of Sciencesthe Ministry of Environmental Protection's Special Funds for Research on Public Welfare(No.201409002)Partly financial support is also provided by the Guangdong Provincial Department of Science and Technology,the project of demonstration research of air quality management cost-benefit analysis and attainment assessments technology(No.2014A050503019)
文摘This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_（2.5） attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_（2.5） to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition（SMAT-CE）,and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta（YRD） in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality（CMAQ） model simulation results with maximum mean normalized error 〈 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_（2.5） in January and August（e.g.,more than50%contributed by primary emissions in Shanghai）,and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China＇s annual PM_（2.5）National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_（2.5）（and potentially O_3 as well） and streamline air quality data for SMAT-CE to perform attainment assessments.
文摘A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation subsystem. A non-contact measurement method based on digital image processing is introduced to improve measurement of specimen deformation. Based on the method, a series of conventional tri-axial compression tests under diverse stress paths are done. Then an elasto-plastic constitutive model of soil is acquired through the numerical method of modeling constitutive law for geomaterial. Two examples of specimen deformation and ground subsidence are presented and discussed. It indicated that this method can rationally simulate the stress-strain relationship of soil, which reflects the effect of stress path on soil stress-strain relationship.
基金supported by the Non-profit Industry Financial Program from the Ministry of Water Resources of the People’s Republic of China (No 200901032)
文摘One of the most important causes of the freshwater shortage in estuarine area is the increasing seawater intrusion into the river.To simulate seawater intrusion properly,two important factors should be considered.One is the bidirectional and time-dependent coupling effects between river discharges and tidal forces.The other is the three-dimensional and stratified structure of dynamic processes involved.However,these two factors have rarely been investigated simultaneously,or they were often simplified in previous researches,especially for the estuary connected with an upstream river network through multiple outlets such as the Pearl River Estuary(PRE).In order to consider these two factors,a numerical modeling system,which couples a one-dimensional river network model with a three-dimensional unstructured-grid Finite-Volume Coastal Ocean Model(FVCOM),has been developed and successfully applied to the simulation of seawater intrusion into rivers emptying into the PRE.By treating the river network with a one-dimensional model,computational efficiency has been improved.With coupling 1D and 3D models,the specification of upstream boundary conditions becomes more convenient.Simulated results are compared with field measured data.Good agreement indicates that the modeling system may correctly capture the physical processes of seawater intrusion into rivers.
文摘One of the key problems in collaborative geometric modeling systems is topological entity correspondence when topolog- ical structure of geometry models on collaborative sites changes, ha this article, we propose a solution for tracking topological entity alterations in 3D collaborative modeling environment. We firstly make a thorough analysis and detailed categorization on the altera- tion properties and causations for each type of topological entity, namely topological face and topological edge. Based on collabora- tive topological entity naming mechanism, a data structure called TEST （Topological Entity Structure Tree） is introduced to track the changing history and current state of each topological entity, to embody the relationship among topological entities. Rules and algo- rithms are presented for identification of topological entities referenced by operations for correct execution and model consistency. The algorithm has been verified within the prototype we have implemented with ACIS.
文摘The BGHMS system described in this paper was designed to model the geohistory for cratonic basins and written in turbo BASIC language with a user-friendly interface for data inputs and outputs on IBM PC-compatible computers. The major mathematical models in this system include the models of compaction correction. unconformity restoration. sea-level change and paleo-water-depth correction. and tectonic subsidence modeling. Two geological events of sediment compaction and erosion are considered in this system. It consists of three modules for data input, geohistory modeling and graph conversion and output. containing more than twenty subroutine programs, is an easy-to-use. menu-driven program system with many obvious advantages, and is a useful tool for hydrocarbon geologists to make quantitative studies on geohistory and to make exploration decisions in regional evaluation.
基金supported by the Liaoning Provincial Natural Science Foundation of China(Grant No.2020-MS-027)。
文摘Accurate modeling of urban climate is essential to predict potential environmental risks in cities.Urban datasets,such as urban land use and urban canopy parameters(UCPs),are key input data for urban climate models and largely affect their performance.However,access to reliable urban datasets is a challenge,especially in fast urbanizing countries.In this study,we developed a high-resolution national urban dataset in China(NUDC)for the WRF/urban modeling system and evaluated its effect on urban climate modeling.Specifically,an optimization method based on building morphology was proposed to classify urban land use types.The key UCPs,including building height and width,street width,surface imperviousness,and anthropogenic heat flux,were calculated for both single-layer Urban Canopy Model(UCM)and multiple-layer Building Energy Parameterization(BEP).The results show that the derived morphological-based urban land use classification could better reflect the urban characteristics,compared to the socioeconomic-function-based classification.The UCPs varied largely in spatial within and across the cities.The integration of the developed urban land use and UCPs datasets significantly improved the representation of urban canopy characteristics,contributing to a more accurate modeling of near-surface air temperature,humidity,and wind in urban areas.The UCM performed better in the modeling of air temperature and humidity,while the BEP performed better in the modeling of wind speed.The newly developed NUDC can advance the study of urban climate and improve the prediction of potential urban environmental risks in China.
