Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
Underground engineering projects such as deep tunnel excavation often encounter rockburst disasters accompanied by numerous microseismic events.Rapid interpretation of microseismic signals is crucial for the timely id...Underground engineering projects such as deep tunnel excavation often encounter rockburst disasters accompanied by numerous microseismic events.Rapid interpretation of microseismic signals is crucial for the timely identification of rockbursts.However,conventional processing encompasses multi-step workflows,including classification,denoising,picking,locating,and computational analysis,coupled with manual intervention,which collectively compromise the reliability of early warnings.To address these challenges,this study innovatively proposes the“microseismic stethoscope"-a multi-task machine learning and deep learning model designed for the automated processing of massive microseismic signals.This model efficiently extracts three key parameters that are necessary for recognizing rockburst disasters:rupture location,microseismic energy,and moment magnitude.Specifically,the model extracts raw waveform features from three dedicated sub-networks:a classifier for source zone classification,and two regressors for microseismic energy and moment magnitude estimation.This model demonstrates superior efficiency compared to traditional processing and semi-automated processing,reducing per-event processing time from 0.71 s to 0.49 s to merely 0.036 s.It concurrently achieves 98%accuracy in source zone classification,with microseismic energy and moment magnitude estimation errors of 0.13 and 0.05,respectively.This model has been well applied and validated in the Daxiagu Tunnel case in Sichuan,China.The application results indicate that the model is as accurate as traditional methods in determining source parameters,and thus can be used to identify potential geomechanical processes of rockburst disasters.By enhancing the signal processing reliability of microseismic events,the proposed model in this study presents a significant advancement in the identification of rockburst disasters.展开更多
In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-t...In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.展开更多
English reading proficiency is essential for university students in a globalized academic environment,yet many L2 learners encounter challenges,such as limited vocabulary,complex syntax,and unclear text organization,l...English reading proficiency is essential for university students in a globalized academic environment,yet many L2 learners encounter challenges,such as limited vocabulary,complex syntax,and unclear text organization,leading to cognitive overload.Grounded in the Cognitive Load Theory(CLT),this study examines the role of the Chunking Reading Processing Strategy-which integrates fragmented linguistic information into meaningful units at lexical,syntactic,and discourse levels-in alleviating cognitive load and improving reading comprehension.Through a mixed-methods approach,the research investigates how learners at different proficiency levels perceive and apply the chunking strategy,and how such application relates to cognitive load management.The results indicate that higher-proficiency learners employ chunking more frequently and report greater benefits,whereas lower-proficiency learners depend more on instructional support.The study confirms the theoretical and pedagogical value of chunk-based reading instruction and suggests that differentiated,cognitively informed teaching of the chunking strategy can enhance both reading efficiency and strategic awareness among L2 learners.展开更多
While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as...While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as complex 3D survey planning,low signal-tonoise ratio raw data,inadequate near-surface velocity modeling,and imaging inaccuracy have long hindered the advancement of seismic exploration across this region.Through a problem-solving approach rooted in geological target analysis,this research systematically investigates the behavioral patterns of nodal seismometer-based high-density seismic acquisition in loess plateau.Tailored advancements in waveform enhancement and depth velocity modelling methodologies have been engineered.Field validations confirm that the optimized workflow demonstrates marked improvements in amplitude preservation and imaging resolution,offering novel insights for future reservoir characterization endeavors.展开更多
Background:In mental health,recovery is emphasized,and qualitative analyses of service users’narratives have accumulated;however,while qualitative approaches excel at capturing rich context and generating new concept...Background:In mental health,recovery is emphasized,and qualitative analyses of service users’narratives have accumulated;however,while qualitative approaches excel at capturing rich context and generating new concepts,they are limited in generalizability and feasible data volume.This study aimed to quantify the subjective life history narratives of users of psychiatric home-visit nursing using natural language processing(NLP)and to clarify the relationships between linguistic features and recovery-related indicators.Methods:We conducted audio-recorded and transcribed semi-structured interviews on daily life verbatim and collected self-report questionnaires(Recovery Assessment Scale[RAS])and clinician ratings(Global Assessment of Functioning[GAF])from Japanese users of psychiatric home-visit nursing.Using the artificial intelligence-based topic-modeling method BERTopic,we extracted topics from the interview texts and calculated each participant’s topic proportions,and then examined associations between topic proportions and recovery-related indicators using Pearson correlation analyses.Results:“School”showed a significant positive correlation with RAS(r=0.39,p=0.05),whereas“Family”showed a significant negative correlation(r=–0.46,p=0.02).GAF was positively correlated with word count(r=0.44,p=0.02)and“Hospital”(r=0.42,p=0.03),and negatively correlated with“Backchannels”(aizuchi)(r=–0.41,p=0.03).Conclusion:The present results suggest that the quantity,quality,and content of narratives can serve as useful indicators of mental health and recovery,and that objective NLP-based analysis of service users’narratives can complement traditional self-report scales and clinician ratings to inform the design of recovery-oriented care in psychiatric home-visit nursing.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This pap...Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This paper analyzes the existing problems in the current teaching of Chinese Medicine Processing Technology courses,discusses the necessity of reforming the teaching model under the context of integration,and proposes the construction of a"Dual-Capability Progression,Six-Dimensional Empowerment"teaching model.The aim is to enhance the teaching quality of Chinese Medicine Processing Technology courses and cultivate high-quality skilled talents in Chinese medicine processing who can meet industry demands.展开更多
In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in...In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in real time by drawing bounding boxes around them.These bounding boxes are subsequently passed to a YOLOv11 classification model,which analyzes cropped images and assigns class labels.An additional counting module automatically tallies the detected fruits,offering a near-instantaneous estimation of quantity.The experimental results suggest high precision and recall for detection,high classification accuracy(across 15 classes),and near-perfect counting in real time.This paper presents a multi-stage pipeline for date fruit detection,classification,and automated counting,employing YOLOv11-based models to achieve high accuracy while maintaining real-time throughput.The results demonstrated that the detection precision exceeded 90%,the classification accuracy approached 92%,and the counting module correlated closely with the manual tallies.These findings confirm the potential of reducing manual labour and enhancing operational efficiency in post-harvesting processes.Future studies will include dataset expansion,user-centric interfaces,and integration with harvesting robotics.展开更多
Covert timing channels(CTC)exploit network resources to establish hidden communication pathways,posing signi cant risks to data security and policy compliance.erefore,detecting such hidden and dangerous threats remain...Covert timing channels(CTC)exploit network resources to establish hidden communication pathways,posing signi cant risks to data security and policy compliance.erefore,detecting such hidden and dangerous threats remains one of the security challenges. is paper proposes LinguTimeX,a new framework that combines natural language processing with arti cial intelligence,along with explainable Arti cial Intelligence(AI)not only to detect CTC but also to provide insights into the decision process.LinguTimeX performs multidimensional feature extraction by fusing linguistic attributes with temporal network patterns to identify covert channels precisely.LinguTimeX demonstrates strong e ectiveness in detecting CTC across multiple languages;namely English,Arabic,and Chinese.Speci cally,the LSTM and RNN models achieved F1 scores of 90%on the English dataset,89%on the Arabic dataset,and 88%on the Chinese dataset,showcasing their superior performance and ability to generalize across multiple languages. is highlights their robustness in detecting CTCs within security systems,regardless of the language or cultural context of the data.In contrast,the DeepForest model produced F1-scores ranging from 86%to 87%across the same datasets,further con rming its e ectiveness in CTC detection.Although other algorithms also showed reasonable accuracy,the LSTM and RNN models consistently outperformed them in multilingual settings,suggesting that deep learning models might be better suited for this particular problem.展开更多
Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis ...Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.展开更多
Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite a...Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.展开更多
Survivability is the capability of a system to fulfill its mission in the presence of attacks, failures, or accidents, and recover full service in a timely manner. On the basis of J. K. Millen＇s survivability measure...Survivability is the capability of a system to fulfill its mission in the presence of attacks, failures, or accidents, and recover full service in a timely manner. On the basis of J. K. Millen＇s survivability measure method, the paper sets the PST-based （processing-storage-transmission） survivability system model, gives description of survivability of PST-based survivability systematic model, and proposes the algorithm of PST-based system survivability measure. Finally, it composes a system based on processing, storage and transmission, and gets the data of system survivability measure with the algorithm. It proves that the feasibility and validity of the method of PST-based system survivability measure.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network act...Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.展开更多
Modeling for nitritation process was discussed and analyzed quantitatively for the factors that influence nitrite accumulation. The results indicated that pH, inorganic carbon source and Hydraulic Retention Time(HRT) ...Modeling for nitritation process was discussed and analyzed quantitatively for the factors that influence nitrite accumulation. The results indicated that pH, inorganic carbon source and Hydraulic Retention Time(HRT) as well as biomass concentration are the main factors that influenced the conversion ratio of ammonium to nitrite. A constant high pH can lead to a high nitritation rate and results in high conversion ratio on condition that free ammonia inhibition do not happen. In a CSTR system, without pH control, this conversion ratio can be monitored by pH variation in the reactor. The pH goes down far from the inlet level means a strongly nitrite accumulation. High concentration of alkalinity can promoted the conversion ratio by means of accelerating the nitritation rate through providing sufficient inorganic carbon source(carbon dioxide). When inorganic carbon source was depleted, the nitritation process stopped. HRT adjustment could be an efficient way to make the nitritation system run more flexible, which to some extent can meet the requirements of the fluctuant of inlet parameters such as ammonium concentration, pH, and temperature and so on. Biomass concentration is the key point, especially for a CSTR system in steady state, which was normally circumscribed by the characteristics of bacteria and may also affected by aeration mode and can be increased by prolonging the HRT on the condition of no nitrate accumulation when no recirculation available. The higher the biomass concentration is, the better the nitrite accumulation can be obtained.展开更多
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
基金supported by the National Natural Science Foundation of China(Grant Nos.42130719 and 42177173)the Doctoral Direct Train Project of Chongqing Natural Science Foundation(Grant No.CSTB2023NSCQ-BSX0029).
文摘Underground engineering projects such as deep tunnel excavation often encounter rockburst disasters accompanied by numerous microseismic events.Rapid interpretation of microseismic signals is crucial for the timely identification of rockbursts.However,conventional processing encompasses multi-step workflows,including classification,denoising,picking,locating,and computational analysis,coupled with manual intervention,which collectively compromise the reliability of early warnings.To address these challenges,this study innovatively proposes the“microseismic stethoscope"-a multi-task machine learning and deep learning model designed for the automated processing of massive microseismic signals.This model efficiently extracts three key parameters that are necessary for recognizing rockburst disasters:rupture location,microseismic energy,and moment magnitude.Specifically,the model extracts raw waveform features from three dedicated sub-networks:a classifier for source zone classification,and two regressors for microseismic energy and moment magnitude estimation.This model demonstrates superior efficiency compared to traditional processing and semi-automated processing,reducing per-event processing time from 0.71 s to 0.49 s to merely 0.036 s.It concurrently achieves 98%accuracy in source zone classification,with microseismic energy and moment magnitude estimation errors of 0.13 and 0.05,respectively.This model has been well applied and validated in the Daxiagu Tunnel case in Sichuan,China.The application results indicate that the model is as accurate as traditional methods in determining source parameters,and thus can be used to identify potential geomechanical processes of rockburst disasters.By enhancing the signal processing reliability of microseismic events,the proposed model in this study presents a significant advancement in the identification of rockburst disasters.
基金supported by he National Social Science Found of China(2022-SKJJ-B-112).
文摘In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.
基金funded by the 2024 Shanghai Social Science Planning Annual Project titled“A Study on the Chunk Processing Mechanisms and Cognitive Motivations of ESL Reading”(Fund No.2024BYY012).
文摘English reading proficiency is essential for university students in a globalized academic environment,yet many L2 learners encounter challenges,such as limited vocabulary,complex syntax,and unclear text organization,leading to cognitive overload.Grounded in the Cognitive Load Theory(CLT),this study examines the role of the Chunking Reading Processing Strategy-which integrates fragmented linguistic information into meaningful units at lexical,syntactic,and discourse levels-in alleviating cognitive load and improving reading comprehension.Through a mixed-methods approach,the research investigates how learners at different proficiency levels perceive and apply the chunking strategy,and how such application relates to cognitive load management.The results indicate that higher-proficiency learners employ chunking more frequently and report greater benefits,whereas lower-proficiency learners depend more on instructional support.The study confirms the theoretical and pedagogical value of chunk-based reading instruction and suggests that differentiated,cognitively informed teaching of the chunking strategy can enhance both reading efficiency and strategic awareness among L2 learners.
文摘While the Ordos Basin is recognized for its substantial hydrocarbon exploration prospects,its rugged loess tableland terrain has rendered seismic exploration exceptionally challenging[1-3].Persistent obstacles such as complex 3D survey planning,low signal-tonoise ratio raw data,inadequate near-surface velocity modeling,and imaging inaccuracy have long hindered the advancement of seismic exploration across this region.Through a problem-solving approach rooted in geological target analysis,this research systematically investigates the behavioral patterns of nodal seismometer-based high-density seismic acquisition in loess plateau.Tailored advancements in waveform enhancement and depth velocity modelling methodologies have been engineered.Field validations confirm that the optimized workflow demonstrates marked improvements in amplitude preservation and imaging resolution,offering novel insights for future reservoir characterization endeavors.
文摘Background:In mental health,recovery is emphasized,and qualitative analyses of service users’narratives have accumulated;however,while qualitative approaches excel at capturing rich context and generating new concepts,they are limited in generalizability and feasible data volume.This study aimed to quantify the subjective life history narratives of users of psychiatric home-visit nursing using natural language processing(NLP)and to clarify the relationships between linguistic features and recovery-related indicators.Methods:We conducted audio-recorded and transcribed semi-structured interviews on daily life verbatim and collected self-report questionnaires(Recovery Assessment Scale[RAS])and clinician ratings(Global Assessment of Functioning[GAF])from Japanese users of psychiatric home-visit nursing.Using the artificial intelligence-based topic-modeling method BERTopic,we extracted topics from the interview texts and calculated each participant’s topic proportions,and then examined associations between topic proportions and recovery-related indicators using Pearson correlation analyses.Results:“School”showed a significant positive correlation with RAS(r=0.39,p=0.05),whereas“Family”showed a significant negative correlation(r=–0.46,p=0.02).GAF was positively correlated with word count(r=0.44,p=0.02)and“Hospital”(r=0.42,p=0.03),and negatively correlated with“Backchannels”(aizuchi)(r=–0.41,p=0.03).Conclusion:The present results suggest that the quantity,quality,and content of narratives can serve as useful indicators of mental health and recovery,and that objective NLP-based analysis of service users’narratives can complement traditional self-report scales and clinician ratings to inform the design of recovery-oriented care in psychiatric home-visit nursing.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金Supported by Scientific Research Fund Project of Yunnan Provincial Department of Education(2025J1950).
文摘Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This paper analyzes the existing problems in the current teaching of Chinese Medicine Processing Technology courses,discusses the necessity of reforming the teaching model under the context of integration,and proposes the construction of a"Dual-Capability Progression,Six-Dimensional Empowerment"teaching model.The aim is to enhance the teaching quality of Chinese Medicine Processing Technology courses and cultivate high-quality skilled talents in Chinese medicine processing who can meet industry demands.
基金supported by the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,Grant No.KFU250098.
文摘In this study,an automated multimodal system for detecting,classifying,and dating fruit was developed using a two-stage YOLOv11 pipeline.In the first stage,the YOLOv11 detection model locates individual date fruits in real time by drawing bounding boxes around them.These bounding boxes are subsequently passed to a YOLOv11 classification model,which analyzes cropped images and assigns class labels.An additional counting module automatically tallies the detected fruits,offering a near-instantaneous estimation of quantity.The experimental results suggest high precision and recall for detection,high classification accuracy(across 15 classes),and near-perfect counting in real time.This paper presents a multi-stage pipeline for date fruit detection,classification,and automated counting,employing YOLOv11-based models to achieve high accuracy while maintaining real-time throughput.The results demonstrated that the detection precision exceeded 90%,the classification accuracy approached 92%,and the counting module correlated closely with the manual tallies.These findings confirm the potential of reducing manual labour and enhancing operational efficiency in post-harvesting processes.Future studies will include dataset expansion,user-centric interfaces,and integration with harvesting robotics.
基金This study is financed by the European Union-NextGenerationEU,through the National Recovery and Resilience Plan of the Republic of Bulgaria,Project No.BG-RRP-2.013-0001.
文摘Covert timing channels(CTC)exploit network resources to establish hidden communication pathways,posing signi cant risks to data security and policy compliance.erefore,detecting such hidden and dangerous threats remains one of the security challenges. is paper proposes LinguTimeX,a new framework that combines natural language processing with arti cial intelligence,along with explainable Arti cial Intelligence(AI)not only to detect CTC but also to provide insights into the decision process.LinguTimeX performs multidimensional feature extraction by fusing linguistic attributes with temporal network patterns to identify covert channels precisely.LinguTimeX demonstrates strong e ectiveness in detecting CTC across multiple languages;namely English,Arabic,and Chinese.Speci cally,the LSTM and RNN models achieved F1 scores of 90%on the English dataset,89%on the Arabic dataset,and 88%on the Chinese dataset,showcasing their superior performance and ability to generalize across multiple languages. is highlights their robustness in detecting CTCs within security systems,regardless of the language or cultural context of the data.In contrast,the DeepForest model produced F1-scores ranging from 86%to 87%across the same datasets,further con rming its e ectiveness in CTC detection.Although other algorithms also showed reasonable accuracy,the LSTM and RNN models consistently outperformed them in multilingual settings,suggesting that deep learning models might be better suited for this particular problem.
基金funded by the research startup funding of National Research Foundation (NRF) of Korea through the Ministry of Science and ICT 2022R1G1A1009887Part of this study was supported by research start-up funding of Anhui University (S202418001/078)。
文摘Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.
基金Supported by National Key Research and Development Program(Grant No.2024YFB3312700)National Natural Science Foundation of China(Grant No.52405541)the Changzhou Municipal Sci&Tech Program(Grant No.CJ20241131)。
文摘Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.
基金Supported by Specialized Research Fund for Doctoral Program of Higher Education of China(20050217007)
文摘Survivability is the capability of a system to fulfill its mission in the presence of attacks, failures, or accidents, and recover full service in a timely manner. On the basis of J. K. Millen＇s survivability measure method, the paper sets the PST-based （processing-storage-transmission） survivability system model, gives description of survivability of PST-based survivability systematic model, and proposes the algorithm of PST-based system survivability measure. Finally, it composes a system based on processing, storage and transmission, and gets the data of system survivability measure with the algorithm. It proves that the feasibility and validity of the method of PST-based system survivability measure.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金Technology Development Program of Jilin Province(YDZJ202201ZYTS640)the National Key Research and Development Program of China(2022YFB4200400)funded by MOST+4 种基金the National Natural Science Foundation of China(52172048 and 52103221)Shandong Provincial Natural Science Foundation(ZR2021QB024 and ZR2021ZD06)Guangdong Basic and Applied Basic Research Foundation(2023A1515012323,2023A1515010943,and 2024A1515010023)the Qingdao New Energy Shandong Laboratory open Project(QNESL OP 202309)the Fundamental Research Funds of Shandong University.
文摘Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.
文摘Modeling for nitritation process was discussed and analyzed quantitatively for the factors that influence nitrite accumulation. The results indicated that pH, inorganic carbon source and Hydraulic Retention Time(HRT) as well as biomass concentration are the main factors that influenced the conversion ratio of ammonium to nitrite. A constant high pH can lead to a high nitritation rate and results in high conversion ratio on condition that free ammonia inhibition do not happen. In a CSTR system, without pH control, this conversion ratio can be monitored by pH variation in the reactor. The pH goes down far from the inlet level means a strongly nitrite accumulation. High concentration of alkalinity can promoted the conversion ratio by means of accelerating the nitritation rate through providing sufficient inorganic carbon source(carbon dioxide). When inorganic carbon source was depleted, the nitritation process stopped. HRT adjustment could be an efficient way to make the nitritation system run more flexible, which to some extent can meet the requirements of the fluctuant of inlet parameters such as ammonium concentration, pH, and temperature and so on. Biomass concentration is the key point, especially for a CSTR system in steady state, which was normally circumscribed by the characteristics of bacteria and may also affected by aeration mode and can be increased by prolonging the HRT on the condition of no nitrate accumulation when no recirculation available. The higher the biomass concentration is, the better the nitrite accumulation can be obtained.
