This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hype...This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.展开更多
Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the s...Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.展开更多
Large-scale new energy grid connection leads to the weakening of the system frequency regulation capability,and the system frequency stability is facing unprecedented challenges.In order to solve rapid frequency fluct...Large-scale new energy grid connection leads to the weakening of the system frequency regulation capability,and the system frequency stability is facing unprecedented challenges.In order to solve rapid frequency fluctuation caused by new energy units,this paper proposes a new energy power system frequency regulation strategy with multiple units including the doubly-fed pumped storage unit(DFPSU).Firstly,based on the model predictive control(MPC)theory,the state space equations are established by considering the operating characteristics of the units and the dynamic behavior of the system;secondly,the proportional-differential control link is introduced to minimize the frequency deviation to further optimize the frequency modulation(FM)output of the DFPSU and inhibit the rapid fluctuation of the frequency;lastly,it is verified on theMatlab/Simulink simulation platform,and the results show that the model predictive control with proportional-differential control link can further release the FM potential of the DFPSU,increase the depth of its FM,effectively reduce the frequency deviation of the system and its rate of change,realize the optimization of the active output of the DFPSU and that of other units,and improve the frequency response capability of the system.展开更多
Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive cont...Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.展开更多
To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the stre...To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the strength and elastic modulus of mortar and concrete prepared with mechanism aggregates of the corresponding lithology,and the stress-strain curves of concrete were investigated.In this paper,a coarse aggregate and mortar matrix bonding assumption is proposed,and a prediction model for the elastic modulus of mortar is established by considering the lithology of the mechanism sand and the slurry components.An equivalent coarse aggregate elastic modulus model was established by considering factors such as coarse aggregate particle size,volume fraction,and mortar thickness between coarse aggregates.Based on the elastic modulus of the equivalent coarse aggregate and the remaining mortar,a prediction model for the elastic modulus of the two and three components of concrete in series and then in parallel was established,and the predicted values differed from the measured values within 10%.It is proposed that the coarse aggregate elastic modulus in highstrength concrete is the most critical factor affecting the elastic modulus of concrete,and as the coarse aggregate elastic modulus increases by 27.7%,the concrete elastic modulus increases by 19.5%.展开更多
BACKGROUND:This study aims to develop and validate a machine learning-based in-hospital mortality predictive model for acute aortic syndrome(AAS)in the emergency department(ED)and to derive a simplifi ed version suita...BACKGROUND:This study aims to develop and validate a machine learning-based in-hospital mortality predictive model for acute aortic syndrome(AAS)in the emergency department(ED)and to derive a simplifi ed version suitable for rapid clinical application.METHODS:In this multi-center retrospective cohort study,AAS patient data from three hospitals were analyzed.The modeling cohort included data from the First Affiliated Hospital of Zhengzhou University and the People’s Hospital of Xinjiang Uygur Autonomous Region,with Peking University Third Hospital data serving as the external test set.Four machine learning algorithms—logistic regression(LR),multilayer perceptron(MLP),Gaussian naive Bayes(GNB),and random forest(RF)—were used to develop predictive models based on 34 early-accessible clinical variables.A simplifi ed model was then derived based on fi ve key variables(Stanford type,pericardial eff usion,asymmetric peripheral arterial pulsation,decreased bowel sounds,and dyspnea)via Least Absolute Shrinkage and Selection Operator(LASSO)regression to improve ED applicability.RESULTS:A total of 929 patients were included in the modeling cohort,and 210 were included in the external test set.Four machine learning models based on 34 clinical variables were developed,achieving internal and external validation AUCs of 0.85-0.90 and 0.73-0.85,respectively.The simplifi ed model incorporating fi ve key variables demonstrated internal and external validation AUCs of 0.71-0.86 and 0.75-0.78,respectively.Both models showed robust calibration and predictive stability across datasets.CONCLUSION:Both kinds of models were built based on machine learning tools,and proved to have certain prediction performance and extrapolation.展开更多
This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temp...This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.展开更多
Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advance...Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advancements have trans-formed their capabilities through novel designs inspired by biological systems,advanced modeling frameworks,sophisti-cated control strategies,and integration into diverse real-world applications.Recent innovations in multifunctional mate-rials and emerging actuation technologies have markedly expanded manipulator performance,reliability,and dexterity.Concurrently,developments in modeling have progressed from simplified geometric methods toward highly accurate physics-based and hybrid data-driven approaches,substantially improving real-time prediction and controllability.Coupled with these developments,adaptive and robust control strategies-including learning-based techniques-have enabled unprec-edented autonomy and precision in challenging application domains such as Minimally Invasive Surgery(MIS),precision agriculture,deep-sea exploration,disaster recovery,and space missions.Despite these remarkable strides,key challenges remain,notably regarding scalability,long-term material durability,robust integrated sensing,and standardized evaluation procedures.This review comprehensively synthesizes recent advances,critically evaluates state-of-the-art methodologies,and systematically identifies existing gaps to provide a clear roadmap and targeted research directions,guiding future developments toward the broader adoption and optimal utilization of soft robotic manipulators.展开更多
Modern industrial environments require uninterrupted machinery operation to maintain productivity standards while ensuring safety and minimizing costs.Conventional maintenance methods,such as reactive maintenance(i.e....Modern industrial environments require uninterrupted machinery operation to maintain productivity standards while ensuring safety and minimizing costs.Conventional maintenance methods,such as reactive maintenance(i.e.,run to failure)or time-based preventive maintenance(i.e.,scheduled servicing),prove ineffective for complex systems with many Internet of Things(IoT)devices and sensors because they fall short in detecting faults at early stages when it is most crucial.This paper presents a predictive maintenance framework based on a hybrid deep learning model that integrates the capabilities of Long Short-Term Memory(LSTM)Networks and Convolutional Neural Networks(CNNs).The framework integrates spatial feature extraction and temporal sequence modeling to accurately classify the health state of industrial equipment into three categories,including Normal,Require Maintenance,and Failed.The framework uses a modular pipeline that includes IoT-enabled data collection along with secure transmission methods to manage cloud storage and provide real-time fault classification.The FD004 subset of the NASA C-MAPSS dataset,containing multivariate sensor readings from aircraft engines,serves as the training and evaluation data for the model.Experimental results show that the LSTM-CNN model outperforms baseline models such as LSTM-SVM and LSTM-RNN,achieving an overall average accuracy of 86.66%,precision of 86.00%,recall of 86.33%,and F1-score of 86.33%.Contrary to the previous LSTM-CNN-based predictive maintenance models that either provide a binary classification or rely on synthetically balanced data,our paper provides a three-class maintenance state(i.e.,Normal,Require Maintenance,and Failed)along with threshold-based labeling that retains the true nature of the degradation.In addition,our work also provides an IoT-to-cloud-based modular architecture for deployment.It offers Computerized Maintenance Management System(CMMS)integration,making our proposed solution not only technically sound but also practical and innovative.The solution achieves real-world industrial deployment readiness through its reliable performance alongside its scalable system design.展开更多
Dear Editor,This letter presents a novel approach to the data-driven control of unknown nonlinear systems.By leveraging online sparse identification based on the Koopman operator,a high-dimensional linear system model...Dear Editor,This letter presents a novel approach to the data-driven control of unknown nonlinear systems.By leveraging online sparse identification based on the Koopman operator,a high-dimensional linear system model approximating the actual system is obtained online.The upper bound of the discrepancy between the identified model and the actual system is estimated using real-time prediction error,which is then utilized in the design of a tube-based robust model predictive controller.The effectiveness of the proposed approach is validated by numerical simulation.展开更多
This article proposes an algebraic model predictive control(MPC)method for automatic landing.While defining the constraint functions in the optimization problem,the tangent hyperbolic function is preferred.Therefore,t...This article proposes an algebraic model predictive control(MPC)method for automatic landing.While defining the constraint functions in the optimization problem,the tangent hyperbolic function is preferred.Therefore,the optimization problem turns into an unconstrained,continuous,and differentiable form.An analytical two-step method is also proposed to solve the rest of the problem.In the first step,it is assumed that only input constraints are active and states are unconstrained.The optimal solution for this case is calculated directly with the optimality condition.The calculated control signal is revised in the second step according to system dynamics and state constraints.Simulation results of the auto-landing system show that the MPC computation speed is significantly increased by the new algebraic MPC(AMPC)without compromising the control performance,which makes the method realistic for using MPC in systems with high-speed changing dynamics.展开更多
In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),...In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),a control architecture designed specifically for distributed aerial robot systems.By integrating an explicit model predictive controller(MPC)with a tube MPC,our approach significantly reduces online computational demands while enhancing robustness against disturbances such as wind and measurement noise,as well as uncertainties in inertia parameters.Further,we incorporate a cascade controller to minimize steady-state errors and improve system performance dynamically.The results of this assessment provide valuable insights into the effectiveness and reliability of the CET-MPC approach under realistic operating conditions.The simulation results of flight scenarios for multi-agent quadrotors demonstrate the controller’s stability and accurate tracking of the desired path.By addressing the complexities of quadrotors’six degrees of freedom,this controller serves as a versatile solution applicable to a wide range of multi-robot systems with varying degrees of freedom,demonstrating its adaptability and scalability beyond the quadrotor domain.展开更多
Dear Editor,This letter proposes a novel Nash bargaining solution-based multiobjective model predictive control(MPC)scheme to deal with the interaction force control and the path-following problem of the constrained i...Dear Editor,This letter proposes a novel Nash bargaining solution-based multiobjective model predictive control(MPC)scheme to deal with the interaction force control and the path-following problem of the constrained interactive robot.Considering the elastic interaction force model,a mechanical trade-off always exists between the interaction force and position,which means that neither force nor path following can satisfy their desired demands completely.Based on this consideration,two irreconcilable control specifications,the force object function and the position track object function,are proposed,and a new multi-objective MPC scheme is then designed.展开更多
This paper proposes an event-triggered stochastic model predictive control for discrete-time linear time-invariant(LTI)systems under additive stochastic disturbances.It first constructs a probabilistic invariant set a...This paper proposes an event-triggered stochastic model predictive control for discrete-time linear time-invariant(LTI)systems under additive stochastic disturbances.It first constructs a probabilistic invariant set and a probabilistic reachable set based on the priori knowledge of system uncertainties.Assisted with enhanced robust tubes,the chance constraints are then formulated into a deterministic form.To alleviate the online computational burden,a novel event-triggered stochastic model predictive control is developed,where the triggering condition is designed based on the past and future optimal trajectory tracking errors in order to achieve a good trade-off between system resource utilization and control performance.Two triggering parametersσandγare used to adjust the frequency of solving the optimization problem.The probabilistic feasibility and stability of the system under the event-triggered mechanism are also examined.Finally,numerical studies on the control of a heating,ventilation,and air conditioning(HVAC)system confirm the efficacy of the proposed control.展开更多
The application of plant measurement data for system identification and model predictive control(MPC)has garnered significant interest.However,the pervasive presence of noise and contamination in industrial data often...The application of plant measurement data for system identification and model predictive control(MPC)has garnered significant interest.However,the pervasive presence of noise and contamination in industrial data often compromises data quality,thereby degrading performance and reliability of model.To address this challenge,this study proposes a nonlinear MPC method based on robust time delay particle filtering(RPF-MPC).This method is specifically designed to mitigate the impact of stochastic time delays and noise on both model learning and control.RPF-MPC utilizes robust particle filtering with a Laplace distribution to reliably estimate parameters and unknown time delays.In this way,the controller is able to efficiently handle noise and outliers even when the data deviates from a Gaussian distribution.The proposed algorithm is presented in detail,a nonlinear numerical case and a fuel cell water cooling control case are presented to validate the effectiveness of the RPF-MPC method.Simulation results validate the effectiveness and robustness of the RPF-MPC method in handling uncertainty and improving control performance in the PEMFC process.展开更多
In this paper,a framework of model predictive optimization and control for quadruped whole-body locomotion is presented,which enables dynamic balance and minimizes the control effort.First,we propose a hierarchical co...In this paper,a framework of model predictive optimization and control for quadruped whole-body locomotion is presented,which enables dynamic balance and minimizes the control effort.First,we propose a hierarchical control scheme consisting of two modules.The first layer is to find an optimal ground reaction force(GRF)by employing inner model predictive control(MPC)along a full motor gait cycle,ensuring the minimal energy consumption of the system.Based on the output GRF of inner layer,the second layer is designed to prioritize tasks for motor execution sequentially using an outer model predictive control.In inner MPC,an objective function about GRF is designed by using a model with relatively long time horizons.Then a neural network solver is used to obtain the optimal GRF by minimizing the objective function.By using a two-layered MPC architecture,we design a hybrid motion/force controller to handle the impedance of leg joints and robotic uncertainties including external perturbation.Finally,we perform extensive experiments with a quadruped robot,including the crawl and trotting gaits,to verify the proposed control framework.展开更多
To achieve the track following and collision avoidance of underactuated unmanned surface vehicle(USV),autonomous navigation model based on model predictive control is established by including the track offset,speed va...To achieve the track following and collision avoidance of underactuated unmanned surface vehicle(USV),autonomous navigation model based on model predictive control is established by including the track offset,speed variation and rule compliance as the evaluation functions and including the ship domain of dynamic/static navigation obstacles and the mechanical characteristics limitation as constraints.The effectiveness of the model for autonomous navigation of USV in the situation of multi-ship encounters and in the complex waters with both dynamic and static obstructions is verified by several groups of simulation work.The simulation results show that the proposed model can realize the autonomous navigation of the underactuated USV under the complex waters.展开更多
This paper addresses the parallel control of autonomous surface vehicles subject to external disturbances,state constraints,and input constraints in complex ocean environments with multiple obstacles.A safety-certifie...This paper addresses the parallel control of autonomous surface vehicles subject to external disturbances,state constraints,and input constraints in complex ocean environments with multiple obstacles.A safety-certified parallel model predictive control scheme with collision-avoiding capability is proposed for autonomous surface vehicles in the framework of parallel control.Specifically,an extended state observer is designed by leveraging historical and real-time data for concurrent learning to map the motion of autonomous surface vehicles from its physical system to its artificial counterpart.A parallel model predictive control law is developed on the basis of the artificial system for both physical and artificial autonomous surface vehicles to realize virtual-physical tracking control of vehicles subject to state and input constraints.To ensure safety,highorder discrete control barrier functions are encoded in the parallel model predictive control law as safety constraints such that collision avoidance with obstacles can be achieved.A recedinghorizon constrained optimization problem is constructed with the safety constraints encoded by control barrier functions for parallel model predictive control of autonomous surface vehicles and solved via neurodynamic optimization with projection neural networks.The effectiveness and characteristics of the proposed method are demonstrated via simulations for the safe trajectory tracking and automatic berthing of autonomous surface vehicles.展开更多
With the development of More Electric Aircraft(MEA),the Permanent Magnet Synchronous Motor(PMSM)is widely used in the MEA field.The PMSM control system of MEA needs to consider the system reliability,and the inverter ...With the development of More Electric Aircraft(MEA),the Permanent Magnet Synchronous Motor(PMSM)is widely used in the MEA field.The PMSM control system of MEA needs to consider the system reliability,and the inverter switching frequency of the inverter is one of the impacting factors.At the same time,the control accuracy of the system also needs to be considered,and the torque ripple and flux ripple are usually considered to be its important indexes.This paper proposes a three-stage series Model Predictive Torque and Flux Control system(three-stage series MPTFC)based on fast optimal voltage vector selection to reduce switching frequency and suppress torque ripple and flux ripple.Firstly,the analytical model of the PMSM is established and the multi-stage series control method is used to reduce the switching frequency.Secondly,selectable voltage vectors are extended from 8 to 26 and a fast selection method for optimal voltage vector sectors is designed based on the hysteresis comparator,which can suppress the torque ripple and flux ripple to improve the control accuracy.Thirdly,a three-stage series control is obtained by expanding the two-stage series control using the P-Q torque decomposition theory.Finally,a model predictive torque and flux control experimental platform is built,and the feasibility and effectiveness of this method are verified through comparison experiments.展开更多
To solve the attitude trajectory tracking problem for hypersonic vehicles in the presence of system constraints and unknown disturbances,this paper designed a nonlinear robust model predictive control(RMPC)scheme,whic...To solve the attitude trajectory tracking problem for hypersonic vehicles in the presence of system constraints and unknown disturbances,this paper designed a nonlinear robust model predictive control(RMPC)scheme,which can produce near-optimal tracking commands.Unlike the existing designs,the proposed scheme is less conservative and successfully prioritizes the solution optimality.The established RMPC follows a dualloop structure.Specifically,in the outer feedback loop,the reference attitude angle profiles are optimally tracked,while in the inner feedback loop,the control moment commands are produced by optimally tracking the desired angular rate trajectories.Besides,an adaptive disturbance observer(ADO)is designed and embedded in the inner and outer RMPC controllers to alleviate the negative effects caused by unknown external disturbances.The recursive feasibility of the optimization process,together with the input-to-state stability of the proposed RMPC,is theoretically guaranteed by introducing a tightened control constraint and terminal region.The derived property reveals that our proposal can steer the tracking error within a small region of convergence.Finally,the effectiveness of the proposed scheme is demonstrated by performing simulation studies.展开更多
基金supported by the National Natural Science Foundation of China(12072090).
文摘This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.
基金supported in part by the National Natural Science Foundation of China under Grant 52077002。
文摘Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.
基金supported by the National Natural Science Foundation of China(Project No.52377082)the Scientific Research Program of Jilin Provincial Department of Education(Project No.JJKH20230123KJ).
文摘Large-scale new energy grid connection leads to the weakening of the system frequency regulation capability,and the system frequency stability is facing unprecedented challenges.In order to solve rapid frequency fluctuation caused by new energy units,this paper proposes a new energy power system frequency regulation strategy with multiple units including the doubly-fed pumped storage unit(DFPSU).Firstly,based on the model predictive control(MPC)theory,the state space equations are established by considering the operating characteristics of the units and the dynamic behavior of the system;secondly,the proportional-differential control link is introduced to minimize the frequency deviation to further optimize the frequency modulation(FM)output of the DFPSU and inhibit the rapid fluctuation of the frequency;lastly,it is verified on theMatlab/Simulink simulation platform,and the results show that the model predictive control with proportional-differential control link can further release the FM potential of the DFPSU,increase the depth of its FM,effectively reduce the frequency deviation of the system and its rate of change,realize the optimization of the active output of the DFPSU and that of other units,and improve the frequency response capability of the system.
文摘Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.
基金Funded by State Railway Administration Research Project(No.2023JS007)National Natural Science Foundation of China(No.52438002)+1 种基金Research and Development Programs for Science and Technology of China Railways Corporation(No.J2023G003)New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the strength and elastic modulus of mortar and concrete prepared with mechanism aggregates of the corresponding lithology,and the stress-strain curves of concrete were investigated.In this paper,a coarse aggregate and mortar matrix bonding assumption is proposed,and a prediction model for the elastic modulus of mortar is established by considering the lithology of the mechanism sand and the slurry components.An equivalent coarse aggregate elastic modulus model was established by considering factors such as coarse aggregate particle size,volume fraction,and mortar thickness between coarse aggregates.Based on the elastic modulus of the equivalent coarse aggregate and the remaining mortar,a prediction model for the elastic modulus of the two and three components of concrete in series and then in parallel was established,and the predicted values differed from the measured values within 10%.It is proposed that the coarse aggregate elastic modulus in highstrength concrete is the most critical factor affecting the elastic modulus of concrete,and as the coarse aggregate elastic modulus increases by 27.7%,the concrete elastic modulus increases by 19.5%.
基金supported by the special fund of the National Clinical Key Specialty Construction Program[(2022)301-2305].
文摘BACKGROUND:This study aims to develop and validate a machine learning-based in-hospital mortality predictive model for acute aortic syndrome(AAS)in the emergency department(ED)and to derive a simplifi ed version suitable for rapid clinical application.METHODS:In this multi-center retrospective cohort study,AAS patient data from three hospitals were analyzed.The modeling cohort included data from the First Affiliated Hospital of Zhengzhou University and the People’s Hospital of Xinjiang Uygur Autonomous Region,with Peking University Third Hospital data serving as the external test set.Four machine learning algorithms—logistic regression(LR),multilayer perceptron(MLP),Gaussian naive Bayes(GNB),and random forest(RF)—were used to develop predictive models based on 34 early-accessible clinical variables.A simplifi ed model was then derived based on fi ve key variables(Stanford type,pericardial eff usion,asymmetric peripheral arterial pulsation,decreased bowel sounds,and dyspnea)via Least Absolute Shrinkage and Selection Operator(LASSO)regression to improve ED applicability.RESULTS:A total of 929 patients were included in the modeling cohort,and 210 were included in the external test set.Four machine learning models based on 34 clinical variables were developed,achieving internal and external validation AUCs of 0.85-0.90 and 0.73-0.85,respectively.The simplifi ed model incorporating fi ve key variables demonstrated internal and external validation AUCs of 0.71-0.86 and 0.75-0.78,respectively.Both models showed robust calibration and predictive stability across datasets.CONCLUSION:Both kinds of models were built based on machine learning tools,and proved to have certain prediction performance and extrapolation.
文摘This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.
基金Open access funding provided by The Science,Technology&Innovation Funding Authority(STDF)in cooperation with The Egyptian Knowledge Bank(EKB).
文摘Soft robotic manipulators represent a rapidly evolving field characterized by inherent compliance,adaptability,and safe interactions within unstructured environments.Over the past decade(2015-2025),significant advancements have trans-formed their capabilities through novel designs inspired by biological systems,advanced modeling frameworks,sophisti-cated control strategies,and integration into diverse real-world applications.Recent innovations in multifunctional mate-rials and emerging actuation technologies have markedly expanded manipulator performance,reliability,and dexterity.Concurrently,developments in modeling have progressed from simplified geometric methods toward highly accurate physics-based and hybrid data-driven approaches,substantially improving real-time prediction and controllability.Coupled with these developments,adaptive and robust control strategies-including learning-based techniques-have enabled unprec-edented autonomy and precision in challenging application domains such as Minimally Invasive Surgery(MIS),precision agriculture,deep-sea exploration,disaster recovery,and space missions.Despite these remarkable strides,key challenges remain,notably regarding scalability,long-term material durability,robust integrated sensing,and standardized evaluation procedures.This review comprehensively synthesizes recent advances,critically evaluates state-of-the-art methodologies,and systematically identifies existing gaps to provide a clear roadmap and targeted research directions,guiding future developments toward the broader adoption and optimal utilization of soft robotic manipulators.
文摘Modern industrial environments require uninterrupted machinery operation to maintain productivity standards while ensuring safety and minimizing costs.Conventional maintenance methods,such as reactive maintenance(i.e.,run to failure)or time-based preventive maintenance(i.e.,scheduled servicing),prove ineffective for complex systems with many Internet of Things(IoT)devices and sensors because they fall short in detecting faults at early stages when it is most crucial.This paper presents a predictive maintenance framework based on a hybrid deep learning model that integrates the capabilities of Long Short-Term Memory(LSTM)Networks and Convolutional Neural Networks(CNNs).The framework integrates spatial feature extraction and temporal sequence modeling to accurately classify the health state of industrial equipment into three categories,including Normal,Require Maintenance,and Failed.The framework uses a modular pipeline that includes IoT-enabled data collection along with secure transmission methods to manage cloud storage and provide real-time fault classification.The FD004 subset of the NASA C-MAPSS dataset,containing multivariate sensor readings from aircraft engines,serves as the training and evaluation data for the model.Experimental results show that the LSTM-CNN model outperforms baseline models such as LSTM-SVM and LSTM-RNN,achieving an overall average accuracy of 86.66%,precision of 86.00%,recall of 86.33%,and F1-score of 86.33%.Contrary to the previous LSTM-CNN-based predictive maintenance models that either provide a binary classification or rely on synthetically balanced data,our paper provides a three-class maintenance state(i.e.,Normal,Require Maintenance,and Failed)along with threshold-based labeling that retains the true nature of the degradation.In addition,our work also provides an IoT-to-cloud-based modular architecture for deployment.It offers Computerized Maintenance Management System(CMMS)integration,making our proposed solution not only technically sound but also practical and innovative.The solution achieves real-world industrial deployment readiness through its reliable performance alongside its scalable system design.
基金supported by the National Natural Science Foundation of China(62473020).
文摘Dear Editor,This letter presents a novel approach to the data-driven control of unknown nonlinear systems.By leveraging online sparse identification based on the Koopman operator,a high-dimensional linear system model approximating the actual system is obtained online.The upper bound of the discrepancy between the identified model and the actual system is estimated using real-time prediction error,which is then utilized in the design of a tube-based robust model predictive controller.The effectiveness of the proposed approach is validated by numerical simulation.
文摘This article proposes an algebraic model predictive control(MPC)method for automatic landing.While defining the constraint functions in the optimization problem,the tangent hyperbolic function is preferred.Therefore,the optimization problem turns into an unconstrained,continuous,and differentiable form.An analytical two-step method is also proposed to solve the rest of the problem.In the first step,it is assumed that only input constraints are active and states are unconstrained.The optimal solution for this case is calculated directly with the optimality condition.The calculated control signal is revised in the second step according to system dynamics and state constraints.Simulation results of the auto-landing system show that the MPC computation speed is significantly increased by the new algebraic MPC(AMPC)without compromising the control performance,which makes the method realistic for using MPC in systems with high-speed changing dynamics.
文摘In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),a control architecture designed specifically for distributed aerial robot systems.By integrating an explicit model predictive controller(MPC)with a tube MPC,our approach significantly reduces online computational demands while enhancing robustness against disturbances such as wind and measurement noise,as well as uncertainties in inertia parameters.Further,we incorporate a cascade controller to minimize steady-state errors and improve system performance dynamically.The results of this assessment provide valuable insights into the effectiveness and reliability of the CET-MPC approach under realistic operating conditions.The simulation results of flight scenarios for multi-agent quadrotors demonstrate the controller’s stability and accurate tracking of the desired path.By addressing the complexities of quadrotors’six degrees of freedom,this controller serves as a versatile solution applicable to a wide range of multi-robot systems with varying degrees of freedom,demonstrating its adaptability and scalability beyond the quadrotor domain.
基金supported by the National Natural Science Foundation of China(62303095)the Natural Science Foundation of Sichuan Province(2023NSFSC0872).
文摘Dear Editor,This letter proposes a novel Nash bargaining solution-based multiobjective model predictive control(MPC)scheme to deal with the interaction force control and the path-following problem of the constrained interactive robot.Considering the elastic interaction force model,a mechanical trade-off always exists between the interaction force and position,which means that neither force nor path following can satisfy their desired demands completely.Based on this consideration,two irreconcilable control specifications,the force object function and the position track object function,are proposed,and a new multi-objective MPC scheme is then designed.
基金supported by the National Nature Science Foundation of China(62073194)the Natural Science Foundation of Shandong Province of China(ZR2023MF028)the Taishan Scholars Program of Shandong Province(tsqn202312008)
文摘This paper proposes an event-triggered stochastic model predictive control for discrete-time linear time-invariant(LTI)systems under additive stochastic disturbances.It first constructs a probabilistic invariant set and a probabilistic reachable set based on the priori knowledge of system uncertainties.Assisted with enhanced robust tubes,the chance constraints are then formulated into a deterministic form.To alleviate the online computational burden,a novel event-triggered stochastic model predictive control is developed,where the triggering condition is designed based on the past and future optimal trajectory tracking errors in order to achieve a good trade-off between system resource utilization and control performance.Two triggering parametersσandγare used to adjust the frequency of solving the optimization problem.The probabilistic feasibility and stability of the system under the event-triggered mechanism are also examined.Finally,numerical studies on the control of a heating,ventilation,and air conditioning(HVAC)system confirm the efficacy of the proposed control.
基金supported by Jianbing Lingyan Foundation of Zhejiang Province,China(2023C01022)Major Project of Science and Technology of Yunnan Province(202402AD080001)Zhejiang University-China Tobacco Zhejiang Industrial Joint Laboratory Project。
文摘The application of plant measurement data for system identification and model predictive control(MPC)has garnered significant interest.However,the pervasive presence of noise and contamination in industrial data often compromises data quality,thereby degrading performance and reliability of model.To address this challenge,this study proposes a nonlinear MPC method based on robust time delay particle filtering(RPF-MPC).This method is specifically designed to mitigate the impact of stochastic time delays and noise on both model learning and control.RPF-MPC utilizes robust particle filtering with a Laplace distribution to reliably estimate parameters and unknown time delays.In this way,the controller is able to efficiently handle noise and outliers even when the data deviates from a Gaussian distribution.The proposed algorithm is presented in detail,a nonlinear numerical case and a fuel cell water cooling control case are presented to validate the effectiveness of the RPF-MPC method.Simulation results validate the effectiveness and robustness of the RPF-MPC method in handling uncertainty and improving control performance in the PEMFC process.
基金supported in part by the National Natural Science Foundation of China(62133013,U22A2060)Dreams Foundation of Jianghuai Advance Technology Center(2023-ZM01Z024)。
文摘In this paper,a framework of model predictive optimization and control for quadruped whole-body locomotion is presented,which enables dynamic balance and minimizes the control effort.First,we propose a hierarchical control scheme consisting of two modules.The first layer is to find an optimal ground reaction force(GRF)by employing inner model predictive control(MPC)along a full motor gait cycle,ensuring the minimal energy consumption of the system.Based on the output GRF of inner layer,the second layer is designed to prioritize tasks for motor execution sequentially using an outer model predictive control.In inner MPC,an objective function about GRF is designed by using a model with relatively long time horizons.Then a neural network solver is used to obtain the optimal GRF by minimizing the objective function.By using a two-layered MPC architecture,we design a hybrid motion/force controller to handle the impedance of leg joints and robotic uncertainties including external perturbation.Finally,we perform extensive experiments with a quadruped robot,including the crawl and trotting gaits,to verify the proposed control framework.
基金the National Natural Science Foundation of China(No.51879119)the Key Projects of National Key Research and Development Program(No.2021YFB390150)+1 种基金the Natural Science Project of Fujian Province(Nos.2022J01323,2021J01822 and 2020J01660)the Fuzhou-Xiamen-Quanzhou Independent Innovation Region Cooperated Special Foundation(No.3502ZCQXT2021007)。
文摘To achieve the track following and collision avoidance of underactuated unmanned surface vehicle(USV),autonomous navigation model based on model predictive control is established by including the track offset,speed variation and rule compliance as the evaluation functions and including the ship domain of dynamic/static navigation obstacles and the mechanical characteristics limitation as constraints.The effectiveness of the model for autonomous navigation of USV in the situation of multi-ship encounters and in the complex waters with both dynamic and static obstructions is verified by several groups of simulation work.The simulation results show that the proposed model can realize the autonomous navigation of the underactuated USV under the complex waters.
基金supported in part by the National Science and Technology Major Project(2022ZD0119902)the National Natural Science Foundation of China(52471372,623B2018,62203015,62233001)+4 种基金the Liaoning Revitalization Leading Talents Program(XLYC2402054)the Key Basic Research of Dalian(2023JJ11CG008)the Fundamental Research Funds for the Central Universities(3132023508)the Collaborative Research Fund of Hong Kong Research Grants Council(C1013-24G)the Cultivation Program for the Excellent Doctoral Dissertation of Dalian Maritime University(2023YBPY005).
文摘This paper addresses the parallel control of autonomous surface vehicles subject to external disturbances,state constraints,and input constraints in complex ocean environments with multiple obstacles.A safety-certified parallel model predictive control scheme with collision-avoiding capability is proposed for autonomous surface vehicles in the framework of parallel control.Specifically,an extended state observer is designed by leveraging historical and real-time data for concurrent learning to map the motion of autonomous surface vehicles from its physical system to its artificial counterpart.A parallel model predictive control law is developed on the basis of the artificial system for both physical and artificial autonomous surface vehicles to realize virtual-physical tracking control of vehicles subject to state and input constraints.To ensure safety,highorder discrete control barrier functions are encoded in the parallel model predictive control law as safety constraints such that collision avoidance with obstacles can be achieved.A recedinghorizon constrained optimization problem is constructed with the safety constraints encoded by control barrier functions for parallel model predictive control of autonomous surface vehicles and solved via neurodynamic optimization with projection neural networks.The effectiveness and characteristics of the proposed method are demonstrated via simulations for the safe trajectory tracking and automatic berthing of autonomous surface vehicles.
基金co-supported by the National Natural Science Foundation of China(No.52477063)the National Key Research and Development Program of China(No.2023YFF0719100)。
文摘With the development of More Electric Aircraft(MEA),the Permanent Magnet Synchronous Motor(PMSM)is widely used in the MEA field.The PMSM control system of MEA needs to consider the system reliability,and the inverter switching frequency of the inverter is one of the impacting factors.At the same time,the control accuracy of the system also needs to be considered,and the torque ripple and flux ripple are usually considered to be its important indexes.This paper proposes a three-stage series Model Predictive Torque and Flux Control system(three-stage series MPTFC)based on fast optimal voltage vector selection to reduce switching frequency and suppress torque ripple and flux ripple.Firstly,the analytical model of the PMSM is established and the multi-stage series control method is used to reduce the switching frequency.Secondly,selectable voltage vectors are extended from 8 to 26 and a fast selection method for optimal voltage vector sectors is designed based on the hysteresis comparator,which can suppress the torque ripple and flux ripple to improve the control accuracy.Thirdly,a three-stage series control is obtained by expanding the two-stage series control using the P-Q torque decomposition theory.Finally,a model predictive torque and flux control experimental platform is built,and the feasibility and effectiveness of this method are verified through comparison experiments.
文摘To solve the attitude trajectory tracking problem for hypersonic vehicles in the presence of system constraints and unknown disturbances,this paper designed a nonlinear robust model predictive control(RMPC)scheme,which can produce near-optimal tracking commands.Unlike the existing designs,the proposed scheme is less conservative and successfully prioritizes the solution optimality.The established RMPC follows a dualloop structure.Specifically,in the outer feedback loop,the reference attitude angle profiles are optimally tracked,while in the inner feedback loop,the control moment commands are produced by optimally tracking the desired angular rate trajectories.Besides,an adaptive disturbance observer(ADO)is designed and embedded in the inner and outer RMPC controllers to alleviate the negative effects caused by unknown external disturbances.The recursive feasibility of the optimization process,together with the input-to-state stability of the proposed RMPC,is theoretically guaranteed by introducing a tightened control constraint and terminal region.The derived property reveals that our proposal can steer the tracking error within a small region of convergence.Finally,the effectiveness of the proposed scheme is demonstrated by performing simulation studies.
