3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situa...3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.展开更多
Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the meta...Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.展开更多
In this paper,the static output feedback stabilization for large-scale unstable second-order singular systems is investigated.First,the upper bound of all unstable eigenvalues of second-order singular systems is deriv...In this paper,the static output feedback stabilization for large-scale unstable second-order singular systems is investigated.First,the upper bound of all unstable eigenvalues of second-order singular systems is derived.Then,by using the argument principle,a computable stability criterion is proposed to check the stability of secondorder singular systems.Furthermore,by applying model reduction methods to original systems,a static output feedback design algorithm for stabilizing second-order singular systems is presented.A simulation example is provided to illustrate the effectiveness of the design algorithm.展开更多
Experimental stroke research commonly employs focal cerebral ischemic rat models （Bederson et al., 1986a; Longa et al., 1989）. In human patients, ischemic stroke typically results from thrombotic or embolic occlusio...Experimental stroke research commonly employs focal cerebral ischemic rat models （Bederson et al., 1986a; Longa et al., 1989）. In human patients, ischemic stroke typically results from thrombotic or embolic occlusion of a major cerebral artery, usually the mid- dle cerebral artery （MCA）. Experimental focal cerebral ischemia models have been employed to mimic human stroke （Durukan and Tatlisumak, 2007）. Rodent models of focal cerebral ischemia that do not require craniotomy have been developed using intraluminal suture occlusion of the MCA （MCA occlusion, MCAO） （Rosamond et al., 2008）. Furthermore, mouse MCAO models have been wide- ly used and extended to genetic studies of cell death or recovery mechanisms （Liu and McCullough, 2011）. Genetically engineered mouse stroke models are particularly useful for evaluation of isch- emic pathophysiology and the design of new prophylactic, neuro- protective, and therapeutic agents and interventions （Armstead et al., 2010）. During the past two decades, MCAO surgical techniques have been developed that do not reveal surgical techniques for mouse MCAO model engineering. Therefore, we compared MCAO surgical methods in rats and mice.展开更多
Cardiac arrest(CA)is a critical condition in the field of cardiovascular medicine.Despite successful resuscitation,patients continue to have a high mortality rate,largely due to post CA syndrome(PCAS).However,the inju...Cardiac arrest(CA)is a critical condition in the field of cardiovascular medicine.Despite successful resuscitation,patients continue to have a high mortality rate,largely due to post CA syndrome(PCAS).However,the injury and pathophysiological mechanisms underlying PCAS remain unclear.Experimental animal models are valuable tools for exploring the etiology,pathogenesis,and potential interventions for CA and PCAS.Current CA animal models include electrical induction of ventricular fibrillation(VF),myocardial infarction,high potassium,asphyxia,and hemorrhagic shock.Although these models do not fully replicate the complexity of clinical CA,the mechanistic insights they provide remain highly relevant,including post-CA brain injury(PCABI),post-CA myocardial dysfunction(PAMD),systemic ischaemia/reperfusion injury(IRI),and the persistent precipitating pathology.Summarizing the methods of establishing CA models,the challenges encountered in the modeling process,and the mechanisms of PCAS can provide a foundation for developing standardized CA modeling protocols.展开更多
N-11-azaartemisinins potentially active against Plasmodium falciparum are designed by combining molecular electrostatic potential (MEP), ligand-receptor interaction, and models built with supervised machine learning m...N-11-azaartemisinins potentially active against Plasmodium falciparum are designed by combining molecular electrostatic potential (MEP), ligand-receptor interaction, and models built with supervised machine learning methods (PCA, HCA, KNN, SIMCA, and SDA). The optimization of molecular structures was performed using the B3LYP/6-31G* approach. MEP maps and ligand-receptor interactions were used to investigate key structural features required for biological activities and likely interactions between N-11-azaartemisinins and heme, respectively. The supervised machine learning methods allowed the separation of the investigated compounds into two classes: cha and cla, with the properties ε<sub>LUMO+1</sub> (one level above lowest unoccupied molecular orbital energy), d(C<sub>6</sub>-C<sub>5</sub>) (distance between C<sub>6</sub> and C<sub>5</sub> atoms in ligands), and TSA (total surface area) responsible for the classification. The insights extracted from the investigation developed and the chemical intuition enabled the design of sixteen new N-11-azaartemisinins (prediction set), moreover, models built with supervised machine learning methods were applied to this prediction set. The result of this application showed twelve new promising N-11-azaartemisinins for synthesis and biological evaluation.展开更多
Vacuum glazing is highly regarded for its ability to transmit light while providing heat preservation,sound insulation,lightweight characteristics,and resistance to condensation.Scholars have made significant strides ...Vacuum glazing is highly regarded for its ability to transmit light while providing heat preservation,sound insulation,lightweight characteristics,and resistance to condensation.Scholars have made significant strides in the study of vacuum glazing through their notable efforts.This study systematically reviewed vacuum glazing and its composite structures,including material selection,fabrication techniques,research methods,and performance evaluation.This review initially presented fundamental techniques for preparing vacuum glazing,with a focus on edge seal and support pillar arrangements,and introduced common composite structures such as hybrid and tinted vacuum glazing.Furthermore,this review summarized the analytical,numerical,and experimental methodologies used to assess the thermal performance of vacuum glazing.This study also outlined heat transfer coefficients associated with various vacuum glazing structures,investigated the influence of different parameters on their heat transfer coefficients,and evaluated their potential for energy conservation across diverse climatic regions.Finally,the research delineated future trends in the advancement of vacuum glazing to provide guidance for both theoretical studies and practical applications in industry.This research serves as a valuable resource for both theoretical exploration and practical integration of vacuum glazing,facilitating its improvement and optimization to advance sustainable low-carbon building practices.展开更多
20-high mills often face various flatness problems in the production of cold-rolled stainless steel thin strips.The flatness prediction model is essential for flatness control techniques.A novel rapid prediction model...20-high mills often face various flatness problems in the production of cold-rolled stainless steel thin strips.The flatness prediction model is essential for flatness control techniques.A novel rapid prediction model for flatness in a 20-high mill is proposed based on a model coupling method capable of forecasting the flatness of cold-rolled stainless steel thin strips under symmetric and asymmetric rolling conditions.The model integrates deformation coordination equations between rolls,force and moment balance equations,strip exit transverse displacement equations,and no-load roll gap equations into a unified set of linear equations.This solution process avoids repeated iterations between the elastic deformation model of the roll system and the plastic deformation model of the strip,which is a limitation of the traditional method and significantly improves the calculation speed and stability.The accuracy of the model was verified via a ZR22B-52 Sendzimir 20-high mill.The measured and calculated flatness values highly coincided,confirming the model’s accuracy.Rolling calculations of 304 stainless steel thin strips demonstrate that the new model results are consistent with those of the traditional method.The calculation time of the new model is only approximately 0.04%-0.35%that of the traditional method.On this basis,the impact of common flatness control methods on the flatness has been analyzed.展开更多
On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engin...On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engine structures, some of the key parts of the engine were analyzed with refined mesh by sub model method and the error of the FEM solution was estimated by the extrapolation method. The example showed that the sub model can not only analyze the comlex structures without the restriction of the software and hardware of the computers, but get the more precise analysis result also. This method is more suitable for the strength analysis of the complex assembly structure.展开更多
Introduction Types of paper Contributions falling into the following categories will be considered for publication:original articles,review articles,short letters,modelling/theory and methods articles,rapid reports an...Introduction Types of paper Contributions falling into the following categories will be considered for publication:original articles,review articles,short letters,modelling/theory and methods articles,rapid reports and special thematic issues.Please ensure that you select the appropriate article type from the list of options when making your submission.Authors contributing to special issues should ensure that they select the special issue article type from this list.展开更多
The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. ...The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Be- cause the shape and rolling force distribution are very sensitive to strip thickness transverse distribution% variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model cou- pling method is developed, which takes the force distribution between rolls, rolling force distribution and strip＇s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elas- tic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method re- spectively. The results of front tension stress, back tension stress, strip^s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. How- ever the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability.展开更多
Spastic cerebral palsy is generally considered to result from cerebral cortical or pyramidal tract damage. Here, we precisely targeted the left pyramidal tract of 2-month-old Sprague-Dawley rats placed on a stereotaxi...Spastic cerebral palsy is generally considered to result from cerebral cortical or pyramidal tract damage. Here, we precisely targeted the left pyramidal tract of 2-month-old Sprague-Dawley rats placed on a stereotaxic instrument under intraperitoneal anesthesia. Based on the rat brain stereotaxic map, a 1-mm hole was made 10 mm posterior to bregma and 0.8 mm left of sagittal suture. A microsyringe was inserted perpendicularly to the surface of the brain to a depth of 9.7 mm, and 15 wL of ethanol was slowly injected to establish a rat model of spastic cerebral palsy. After modeling, the rats appeared to have necrotic voids in the pyramidal tract and exhibited typical signs and symptoms of flexion spasms that lasted for a long period of time. These findings indicate that this is an effective and easy method of establishing a rat model of spastic cerebral palsy with good reproducibility. Ethanol as a chemical ablation agent specifically and thoroughly damages the py- ramidal tract, and therefore, the animals display flexion spasms, which are a typical symptom of the disease.展开更多
Dynamic modeling for incompressible hyperelastic materials with large deformation is an important issue in biomimetic applications. The previously proposed lower-order fully parameterized absolute nodal coordinate for...Dynamic modeling for incompressible hyperelastic materials with large deformation is an important issue in biomimetic applications. The previously proposed lower-order fully parameterized absolute nodal coordinate formulation（ANCF） beam element employs cubic interpolation in the longitudinal direction and linear interpolation in the transverse direction, whereas it cannot accurately describe the large bending deformation. On this account, a novel modeling method for studying the dynamic behavior of nonlinear materials is proposed in this paper. In this formulation, a higher-order beam element characterized by quadratic interpolation in the transverse directions is used in this investigation. Based on the Yeoh model and volumetric energy penalty function, the nonlinear elastic force matrices are derived within the ANCF framework. The feasibility and availability of the Yeoh model are verified through static experiment of nonlinear incompressible materials. Furthermore,dynamic simulation of a silicone cantilever beam under the gravity force is implemented to validate the superiority of the higher-order beam element. The simulation results obtained based on the Yeoh model by employing three different ANCF beam elements are compared with the result achieved from a commercial finite element package as the reference result. It is found that the results acquired utilizing a higher-order beam element are in good agreement with the reference results,while the results obtained using a lower-order beam element are different from the reference results. In addition, the stiffening problem caused by volumetric locking can be resolved effectively by applying a higher-order beam element. It is concluded that the proposed higher-order beam element formulation has satisfying accuracy in simulating dynamic motion process of the silicone beam.展开更多
To balance the contradiction between comprehensiveness of system-of systems （SOS） description and cost of modeling and simulation, a non-uniform hybrid strategy （NUHYS） is pro- posed. NUHYS groups elements of an S...To balance the contradiction between comprehensiveness of system-of systems （SOS） description and cost of modeling and simulation, a non-uniform hybrid strategy （NUHYS） is pro- posed. NUHYS groups elements of an SoS operation into system community or relatively indepen- dent system based on contributors complexity and focus relationship according to the focus of SoS problem. Meanwhile, modeling methods are categorized based on details attention rate and dynamic attention rate, seeking for matching contributors. Taking helicopter rescue in earthquake relief as an example, the procedure of applying NUHYS and its effectiveness are verified.展开更多
In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection （PS） algorithm and multi-input multi-output recursive reduced least square support ve...In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection （PS） algorithm and multi-input multi-output recursive reduced least square support vector regression （MRR-LSSVR） machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression （LSSVR） machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5＆. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.展开更多
With the increasing demand for energy conservation and emission reduction,more attentions have been paid to the intelligentization,greenization and low carbonization during the transformation and upgrading of steelmak...With the increasing demand for energy conservation and emission reduction,more attentions have been paid to the intelligentization,greenization and low carbonization during the transformation and upgrading of steelmaking plants.Ladle furnace(LF)refining is one of the key procedures in steelmaking process and has been widely used in steelmaking plants for its high equipment matching degree,low equipment investment and outstanding refining performance.According to the main tasks of LF refining process,the modeling methods of temperature prediction model,slag-making model,alloying model,argon blowing model and model of inclusions behavior were systematically reviewed,and the advantages and disadvantages of each modeling method were summarized.In addition,the technical framework for the future has also been proposed based on existing works,including classification of raw materials,graphic representation of knowledge,introduction,upgradation and management of device/equipment,customization of steelmaking,modeling of refining process,synergy of models,intelligentization of decision-making,automation of control,and digitization of processes and operations,aiming to provide a reference for the modeling and intelligent development of LF refining process.展开更多
CNC machining systems are inevitably confronted with frequent changes in energy behaviors because they are widely used to perform various machining tasks. It is a challenge to understand and analyze the flexible energ...CNC machining systems are inevitably confronted with frequent changes in energy behaviors because they are widely used to perform various machining tasks. It is a challenge to understand and analyze the flexible energy behaviors in CNC machining systems. A method to model flexible energy behaviors in CNC machining systems based on hierarchical objected-oriented Petri net(HOONet) is proposed. The structure of the HOONet is constructed of a high-level model and detail models. The former is used to model operational states for CNC machining systems, and the latter is used to analyze the component models for operational states. The machining parameters having great impacts on energy behaviors in CNC machining systems are declared with the data dictionary in HOONet models. A case study based on a CNC lathe is presented to demonstrate the proposed modeling method. The results show that it is effective for modeling flexible energy behaviors and providing a fine-grained description to quantitatively analyze the energy consumption of CNC machining systems.展开更多
Trailing edge serrations(TESs)are capable of noticeably suppressing the turbulent trailing edge noise induced by rotating wind turbine blades and become an integral part of a blade.However,the challenges involved in t...Trailing edge serrations(TESs)are capable of noticeably suppressing the turbulent trailing edge noise induced by rotating wind turbine blades and become an integral part of a blade.However,the challenges involved in the dimensional design of serration height 2 h,wavelengthλand flap angleϕare yet to be dealt with in a satisfactory manner.To address the problem,a general model for simulating the effects of serrations on the hydrodynamic and aeroacoustic performance is proposed due to its ease of use and relatively low requirements for user input.The solid serrations are replicated by momentum sources calculated by its aerodynamic forces.Then,a case relevant to wind turbine airfoil is examined,a hybrid improved delay detached eddy simulation(IDDES)method coupled with FW-H integration is deployed to obtain the flow features and far-field sound pressure level.It is found that the modeling method could reproduce the flow field and noise as serrated airfoil.展开更多
The relationship between capillary pressure and saturation plays a critical role in the characterization of two-phase flow and transport in aquifers and oil reservoirs. This relationship is usually determined under th...The relationship between capillary pressure and saturation plays a critical role in the characterization of two-phase flow and transport in aquifers and oil reservoirs. This relationship is usually determined under the static condition, where capillary pressure is the only function of saturation. However,considerable experiments have suggested that the dependence of capillary pressure on desaturation rate is under the dynamic condition. Thus, a more general description of capillary pressure that includes dynamic capillary effect has been approved widely. A comprehensive understanding of the dynamic capillary effect is needed for the investigation of the two-phase flow in porous media by various methods. In general, dynamic capillary effect in porous media can be studied through the laboratory experiment, pore-to macro-scale modeling, and artificial neural network. Here, main principle and research procedures of each method are reviewed in detail. Then, research progress, disadvantages and advantages are discussed, respectively. In addition, upscaling study from pore-to macro-scale are introduced, which explains the difference between laboratory experiment and pore-scale modeling. At last, several future perspectives and recommendations for optimal solution of dynamic capillary effect are presented.展开更多
文摘3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.
基金supported jointly by the National Basic Research Program of China("973"Program)(No2014CB046200)the National Science Foundation of Jiangsu Province(No.BK2014059)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China(No.11172135)
文摘Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.
基金Project supported by the National Natural Science Foundation of China(Nos.11971303 and 11871330)。
文摘In this paper,the static output feedback stabilization for large-scale unstable second-order singular systems is investigated.First,the upper bound of all unstable eigenvalues of second-order singular systems is derived.Then,by using the argument principle,a computable stability criterion is proposed to check the stability of secondorder singular systems.Furthermore,by applying model reduction methods to original systems,a static output feedback design algorithm for stabilizing second-order singular systems is presented.A simulation example is provided to illustrate the effectiveness of the design algorithm.
基金supported by the 2013 Inje University Research Grant
文摘Experimental stroke research commonly employs focal cerebral ischemic rat models （Bederson et al., 1986a; Longa et al., 1989）. In human patients, ischemic stroke typically results from thrombotic or embolic occlusion of a major cerebral artery, usually the mid- dle cerebral artery （MCA）. Experimental focal cerebral ischemia models have been employed to mimic human stroke （Durukan and Tatlisumak, 2007）. Rodent models of focal cerebral ischemia that do not require craniotomy have been developed using intraluminal suture occlusion of the MCA （MCA occlusion, MCAO） （Rosamond et al., 2008）. Furthermore, mouse MCAO models have been wide- ly used and extended to genetic studies of cell death or recovery mechanisms （Liu and McCullough, 2011）. Genetically engineered mouse stroke models are particularly useful for evaluation of isch- emic pathophysiology and the design of new prophylactic, neuro- protective, and therapeutic agents and interventions （Armstead et al., 2010）. During the past two decades, MCAO surgical techniques have been developed that do not reveal surgical techniques for mouse MCAO model engineering. Therefore, we compared MCAO surgical methods in rats and mice.
基金supported by the National Key Research and Development Program(2021YFC3002205)the Postgraduate Research and Innovation Program of Tianjin Municipal Education Commission(2022BKY113),China.
文摘Cardiac arrest(CA)is a critical condition in the field of cardiovascular medicine.Despite successful resuscitation,patients continue to have a high mortality rate,largely due to post CA syndrome(PCAS).However,the injury and pathophysiological mechanisms underlying PCAS remain unclear.Experimental animal models are valuable tools for exploring the etiology,pathogenesis,and potential interventions for CA and PCAS.Current CA animal models include electrical induction of ventricular fibrillation(VF),myocardial infarction,high potassium,asphyxia,and hemorrhagic shock.Although these models do not fully replicate the complexity of clinical CA,the mechanistic insights they provide remain highly relevant,including post-CA brain injury(PCABI),post-CA myocardial dysfunction(PAMD),systemic ischaemia/reperfusion injury(IRI),and the persistent precipitating pathology.Summarizing the methods of establishing CA models,the challenges encountered in the modeling process,and the mechanisms of PCAS can provide a foundation for developing standardized CA modeling protocols.
文摘N-11-azaartemisinins potentially active against Plasmodium falciparum are designed by combining molecular electrostatic potential (MEP), ligand-receptor interaction, and models built with supervised machine learning methods (PCA, HCA, KNN, SIMCA, and SDA). The optimization of molecular structures was performed using the B3LYP/6-31G* approach. MEP maps and ligand-receptor interactions were used to investigate key structural features required for biological activities and likely interactions between N-11-azaartemisinins and heme, respectively. The supervised machine learning methods allowed the separation of the investigated compounds into two classes: cha and cla, with the properties ε<sub>LUMO+1</sub> (one level above lowest unoccupied molecular orbital energy), d(C<sub>6</sub>-C<sub>5</sub>) (distance between C<sub>6</sub> and C<sub>5</sub> atoms in ligands), and TSA (total surface area) responsible for the classification. The insights extracted from the investigation developed and the chemical intuition enabled the design of sixteen new N-11-azaartemisinins (prediction set), moreover, models built with supervised machine learning methods were applied to this prediction set. The result of this application showed twelve new promising N-11-azaartemisinins for synthesis and biological evaluation.
基金supported by the National Key R&D Program of China(2023YFC3806202)the National Natural Science Foundation of China(52308093)+3 种基金the Natural Science Foundation of Hunan Province(2023JJ40154)the Science and Technology Innovation Leading Talent Program of Hunan Province(2023RC1042)the Natural Science Foundation of Changsha(kq2208032)the China Postdoctoral Science Foundation(2023M741132 and 2024T170263)。
文摘Vacuum glazing is highly regarded for its ability to transmit light while providing heat preservation,sound insulation,lightweight characteristics,and resistance to condensation.Scholars have made significant strides in the study of vacuum glazing through their notable efforts.This study systematically reviewed vacuum glazing and its composite structures,including material selection,fabrication techniques,research methods,and performance evaluation.This review initially presented fundamental techniques for preparing vacuum glazing,with a focus on edge seal and support pillar arrangements,and introduced common composite structures such as hybrid and tinted vacuum glazing.Furthermore,this review summarized the analytical,numerical,and experimental methodologies used to assess the thermal performance of vacuum glazing.This study also outlined heat transfer coefficients associated with various vacuum glazing structures,investigated the influence of different parameters on their heat transfer coefficients,and evaluated their potential for energy conservation across diverse climatic regions.Finally,the research delineated future trends in the advancement of vacuum glazing to provide guidance for both theoretical studies and practical applications in industry.This research serves as a valuable resource for both theoretical exploration and practical integration of vacuum glazing,facilitating its improvement and optimization to advance sustainable low-carbon building practices.
基金supported by the National Natural Science Foundation of China(No.U21A20118)the Natural Science Foundation of Hebei Province(No.E2023203065)the National Key Laboratory of Metal Forming Technology and Heavy Equipment,China National Heavy Machinery Research Institute Co.,Ltd.(No.S2208100.W04).Author infor。
文摘20-high mills often face various flatness problems in the production of cold-rolled stainless steel thin strips.The flatness prediction model is essential for flatness control techniques.A novel rapid prediction model for flatness in a 20-high mill is proposed based on a model coupling method capable of forecasting the flatness of cold-rolled stainless steel thin strips under symmetric and asymmetric rolling conditions.The model integrates deformation coordination equations between rolls,force and moment balance equations,strip exit transverse displacement equations,and no-load roll gap equations into a unified set of linear equations.This solution process avoids repeated iterations between the elastic deformation model of the roll system and the plastic deformation model of the strip,which is a limitation of the traditional method and significantly improves the calculation speed and stability.The accuracy of the model was verified via a ZR22B-52 Sendzimir 20-high mill.The measured and calculated flatness values highly coincided,confirming the model’s accuracy.Rolling calculations of 304 stainless steel thin strips demonstrate that the new model results are consistent with those of the traditional method.The calculation time of the new model is only approximately 0.04%-0.35%that of the traditional method.On this basis,the impact of common flatness control methods on the flatness has been analyzed.
文摘On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engine structures, some of the key parts of the engine were analyzed with refined mesh by sub model method and the error of the FEM solution was estimated by the extrapolation method. The example showed that the sub model can not only analyze the comlex structures without the restriction of the software and hardware of the computers, but get the more precise analysis result also. This method is more suitable for the strength analysis of the complex assembly structure.
文摘Introduction Types of paper Contributions falling into the following categories will be considered for publication:original articles,review articles,short letters,modelling/theory and methods articles,rapid reports and special thematic issues.Please ensure that you select the appropriate article type from the list of options when making your submission.Authors contributing to special issues should ensure that they select the special issue article type from this list.
基金Sponsored by National Science and Technology Support Plan of China (2009AA04Z143)Science and Technology Support Plan of Hebei Province of China (10212101D)Important Natural Science Foundation of Hebei Province of China (E2006001038)
文摘The shape of strip is calculated by iterative method which combines strip plastic deformation model with rolls elastic deformation model through their calculation results, which can be called results coupling method. Be- cause the shape and rolling force distribution are very sensitive to strip thickness transverse distribution% variation, the iterative course is rather unstable and sometimes convergence cannot be achieved. In addition, the calculating speed of results coupling method is low, which restricts its usable range. To solve the problem, a new model cou- pling method is developed, which takes the force distribution between rolls, rolling force distribution and strip＇s exit transverse displacement distribution as basic unknowns, and integrates strip plastic deformation model and rolls elas- tic deformation model as a unified linear equations through their internal relation, so the iterative calculation between the strip plastic deformation model and rolls elastic deformation model can be avoided. To prove the effectiveness of the model coupling method, two examples are calculated by results coupling method and model coupling method re- spectively. The results of front tension stress, back tension stress, strip^s exit gauge, the force between rolls and rolling force distribution calculated by model coupling method coincide very well with results coupling method. How- ever the calculation course of model coupling method is more steady than results coupling method, and its calculating speed is about ten times as much as the maximal speed of results coupling method, which validates its practicability and reliability.
文摘Spastic cerebral palsy is generally considered to result from cerebral cortical or pyramidal tract damage. Here, we precisely targeted the left pyramidal tract of 2-month-old Sprague-Dawley rats placed on a stereotaxic instrument under intraperitoneal anesthesia. Based on the rat brain stereotaxic map, a 1-mm hole was made 10 mm posterior to bregma and 0.8 mm left of sagittal suture. A microsyringe was inserted perpendicularly to the surface of the brain to a depth of 9.7 mm, and 15 wL of ethanol was slowly injected to establish a rat model of spastic cerebral palsy. After modeling, the rats appeared to have necrotic voids in the pyramidal tract and exhibited typical signs and symptoms of flexion spasms that lasted for a long period of time. These findings indicate that this is an effective and easy method of establishing a rat model of spastic cerebral palsy with good reproducibility. Ethanol as a chemical ablation agent specifically and thoroughly damages the py- ramidal tract, and therefore, the animals display flexion spasms, which are a typical symptom of the disease.
基金supported by the National Natural Science Foundation of China (11772186 and 11272203)
文摘Dynamic modeling for incompressible hyperelastic materials with large deformation is an important issue in biomimetic applications. The previously proposed lower-order fully parameterized absolute nodal coordinate formulation（ANCF） beam element employs cubic interpolation in the longitudinal direction and linear interpolation in the transverse direction, whereas it cannot accurately describe the large bending deformation. On this account, a novel modeling method for studying the dynamic behavior of nonlinear materials is proposed in this paper. In this formulation, a higher-order beam element characterized by quadratic interpolation in the transverse directions is used in this investigation. Based on the Yeoh model and volumetric energy penalty function, the nonlinear elastic force matrices are derived within the ANCF framework. The feasibility and availability of the Yeoh model are verified through static experiment of nonlinear incompressible materials. Furthermore,dynamic simulation of a silicone cantilever beam under the gravity force is implemented to validate the superiority of the higher-order beam element. The simulation results obtained based on the Yeoh model by employing three different ANCF beam elements are compared with the result achieved from a commercial finite element package as the reference result. It is found that the results acquired utilizing a higher-order beam element are in good agreement with the reference results,while the results obtained using a lower-order beam element are different from the reference results. In addition, the stiffening problem caused by volumetric locking can be resolved effectively by applying a higher-order beam element. It is concluded that the proposed higher-order beam element formulation has satisfying accuracy in simulating dynamic motion process of the silicone beam.
基金supported by the Research Project of Ministry of Industry and Information Technology of the People’s Republic of China
文摘To balance the contradiction between comprehensiveness of system-of systems （SOS） description and cost of modeling and simulation, a non-uniform hybrid strategy （NUHYS） is pro- posed. NUHYS groups elements of an SoS operation into system community or relatively indepen- dent system based on contributors complexity and focus relationship according to the focus of SoS problem. Meanwhile, modeling methods are categorized based on details attention rate and dynamic attention rate, seeking for matching contributors. Taking helicopter rescue in earthquake relief as an example, the procedure of applying NUHYS and its effectiveness are verified.
基金co-supported by Aeronautical Science Foundation of China (No. 2010ZB52011)Funding of Jiangsu Innovation Program for Graduate Education (No.CXLX11_0213)
文摘In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection （PS） algorithm and multi-input multi-output recursive reduced least square support vector regression （MRR-LSSVR） machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression （LSSVR） machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5＆. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.
基金funded by the National Natural Science Foundation of China(Grant Nos.50874014,51974023,52374321)the Program for New Century Excellent Talents in University(Grant No.NCET 07-0067)+1 种基金the Fundamental Research Funds for Central Universities(Grant No.FRF-BR-17-029A)the funding of State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing,China(Grant Nos.41620007 and 41621005).
文摘With the increasing demand for energy conservation and emission reduction,more attentions have been paid to the intelligentization,greenization and low carbonization during the transformation and upgrading of steelmaking plants.Ladle furnace(LF)refining is one of the key procedures in steelmaking process and has been widely used in steelmaking plants for its high equipment matching degree,low equipment investment and outstanding refining performance.According to the main tasks of LF refining process,the modeling methods of temperature prediction model,slag-making model,alloying model,argon blowing model and model of inclusions behavior were systematically reviewed,and the advantages and disadvantages of each modeling method were summarized.In addition,the technical framework for the future has also been proposed based on existing works,including classification of raw materials,graphic representation of knowledge,introduction,upgradation and management of device/equipment,customization of steelmaking,modeling of refining process,synergy of models,intelligentization of decision-making,automation of control,and digitization of processes and operations,aiming to provide a reference for the modeling and intelligent development of LF refining process.
基金Supported by National Natural Science Foundation of China(Grant No.51605058)Chongqing Research Program of Basic Research and Frontier Technology of China(Grant No.cstc2015jcyjBX0088)+2 种基金Fundamental Research Funds for the Central Universities of China(Grant No.106112016CDJCR021226)Six Talent Peaks Project in Jiangsu Province of China(Grant No.2014-ZBZZ-006)"Excellence Plans-Zijin Star" Foundation of Nanjing University of Science and Technology,China(Grant No.2015-zijin-07)
文摘CNC machining systems are inevitably confronted with frequent changes in energy behaviors because they are widely used to perform various machining tasks. It is a challenge to understand and analyze the flexible energy behaviors in CNC machining systems. A method to model flexible energy behaviors in CNC machining systems based on hierarchical objected-oriented Petri net(HOONet) is proposed. The structure of the HOONet is constructed of a high-level model and detail models. The former is used to model operational states for CNC machining systems, and the latter is used to analyze the component models for operational states. The machining parameters having great impacts on energy behaviors in CNC machining systems are declared with the data dictionary in HOONet models. A case study based on a CNC lathe is presented to demonstrate the proposed modeling method. The results show that it is effective for modeling flexible energy behaviors and providing a fine-grained description to quantitatively analyze the energy consumption of CNC machining systems.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51736008)“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21050303).
文摘Trailing edge serrations(TESs)are capable of noticeably suppressing the turbulent trailing edge noise induced by rotating wind turbine blades and become an integral part of a blade.However,the challenges involved in the dimensional design of serration height 2 h,wavelengthλand flap angleϕare yet to be dealt with in a satisfactory manner.To address the problem,a general model for simulating the effects of serrations on the hydrodynamic and aeroacoustic performance is proposed due to its ease of use and relatively low requirements for user input.The solid serrations are replicated by momentum sources calculated by its aerodynamic forces.Then,a case relevant to wind turbine airfoil is examined,a hybrid improved delay detached eddy simulation(IDDES)method coupled with FW-H integration is deployed to obtain the flow features and far-field sound pressure level.It is found that the modeling method could reproduce the flow field and noise as serrated airfoil.
基金financially supported by the National Natural Science Foundation of China (No. 42102149)the Fundamental Research Funds for the Central Universities (No. 2462021YXZZ005)。
文摘The relationship between capillary pressure and saturation plays a critical role in the characterization of two-phase flow and transport in aquifers and oil reservoirs. This relationship is usually determined under the static condition, where capillary pressure is the only function of saturation. However,considerable experiments have suggested that the dependence of capillary pressure on desaturation rate is under the dynamic condition. Thus, a more general description of capillary pressure that includes dynamic capillary effect has been approved widely. A comprehensive understanding of the dynamic capillary effect is needed for the investigation of the two-phase flow in porous media by various methods. In general, dynamic capillary effect in porous media can be studied through the laboratory experiment, pore-to macro-scale modeling, and artificial neural network. Here, main principle and research procedures of each method are reviewed in detail. Then, research progress, disadvantages and advantages are discussed, respectively. In addition, upscaling study from pore-to macro-scale are introduced, which explains the difference between laboratory experiment and pore-scale modeling. At last, several future perspectives and recommendations for optimal solution of dynamic capillary effect are presented.
