An analytic phenomenological shell model mass formula for light nuclei is constructed. The formula takes into account the non locality of the self consistent single particle potential and the special features of light...An analytic phenomenological shell model mass formula for light nuclei is constructed. The formula takes into account the non locality of the self consistent single particle potential and the special features of light nuclei, namely： （a） charge and mass distributions are closer to a Gaussian shape than to the shape characteristic in medium and heavy nuclei; （b） the central charge and mass densities are larger than, and decrease towards, the ＂asymptotic＂ values that are the reference parameters for nuclear matter; and （c） after a shell closure, the next level has a larger orbital angular momentum and a noticeably larger mean square radius. Only then a good numerical fit is obtained with parameters consistent with optical model analysis and empirical spin-orbit couplings. A correlation between the ＂skin effect＂ and the symmetry dependence of the optical potential is established. Towards the neutron drip line the potential well depth, the spin-orbit splitting of the single particle levels and the gap between major shells decrease, as has been observed. The ensuing shift and contraction of the single particle level scheme may lead to： （a） to strong configuration mixing and new magic numbers, and （b） the onset of the halo effect, to avoid the expulsion of single particle levels to the continuum.展开更多
The Standard Model of particle physics requires nine lepton and quark masses as inputs, but does not incorporate neutrino masses required by neutrino oscillation observations. This analysis addresses these problems, e...The Standard Model of particle physics requires nine lepton and quark masses as inputs, but does not incorporate neutrino masses required by neutrino oscillation observations. This analysis addresses these problems, explaining Standard Model particle masses by describing fundamental particles as solutions of Einstein’s equations, with radii 1/4 their Compton wavelength and half of any charge on rotating particles located on the surface at each end of the axis of rotation. The analysis relates quark and lepton masses to electron charge and mass, and identifies neutrino masses consistent with neutrino oscillation observations.展开更多
The proposed mass model of vocal fold vibration holds a significant importance in the auxiliary diagnosis and treatment of human vocal fold disorders.Mathematical models are proposed in aerodynamics and acoustics to s...The proposed mass model of vocal fold vibration holds a significant importance in the auxiliary diagnosis and treatment of human vocal fold disorders.Mathematical models are proposed in aerodynamics and acoustics to simulate vocal fold vibration during phonation.This has always been a hot topic in pathological linguistics research.Over the past few decades,researchers have designed various types of mass models of vocal fold vibration based on experiments.These models differ in principles,computational complexity,and degrees of freedom.Therefore,we classify and describe the mass models according to modeling methods.We summarize the research status and characteristics of different models,and based on this,we look forward to future research directions for vocal fold mass models.展开更多
Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squ...Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squares programming(SLSQP)algorithm augments the precision of this multinomial mass model by reducing the error from 1.863 MeV to 1.631 MeV.These algorithms were further examined using 200 sample mass formulae derived from theδE term of the E_(isospin) mass model.The SLSQP method exhibited superior performance compared to the other algorithms in terms of errors and convergence speed.This algorithm is advantageous for handling large-scale multiparameter optimization tasks in nuclear physics.展开更多
A three mass model of vocal cords as well as mathematical expression of the model are discussed. Different kinds of typical hoarse speech due to laryngeal diseases are simulated on microcomputer and the effects of di...A three mass model of vocal cords as well as mathematical expression of the model are discussed. Different kinds of typical hoarse speech due to laryngeal diseases are simulated on microcomputer and the effects of different pathological factors of vocal cords on model parameters are studied. Some typical spectrum distribution of the simulated speech signals are given. Moreover, hoarse speech signals of some typical cases are analyzed by the methods of digital signal processing, including FFT, LPC, Cepstrum technique, Pseudocolor encoding, etc. The experiment results show that the three mass model analysis of vocal cords is an efficient method for analysis of hoarse speech signals.展开更多
The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or ...The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or less intersecting joints）. A synthetic rock mass modelling（SRM） approach is employed to determine the mechanical properties of the rock mass. In this approach, the intact body of rock is represented by the discrete element method（DEM）-Voronoi grains with the ability of simulating the initiation and propagation of microcracks within the intact part of the model. The geometry of the preexisting joints is generated by employing discrete fracture network（DFN） modelling based on field joint data collected from the Brockville Tunnel using LiDAR scanning. The geometrical characteristics of the simulated joints at a representative sample size are first validated against the field data, and then used to measure the rock quality designation（RQD）, joint spacing, areal fracture intensity（P21）, and block volumes. These geometrical quantities are used to quantitatively determine a representative range of the geological strength index（GSI）. The results show that estimating the GSI using the RQD tends to make a closer estimate of the degree of blockiness that leads to GSI values corresponding to those obtained from direct visual observations of the rock mass conditions in the field. The use of joint spacing and block volume in order to quantify the GSI value range for the studied rock mass suggests a lower range compared to that evaluated in situ. Based on numerical modelling results and laboratory data of rock testing reported in the literature, a semi-empirical equation is proposed that relates the rock mass modulus to confinement as a function of the areal fracture intensity and joint stiffness.展开更多
In order to verify the feasibility and stability of a degree-day model on simulating the long time series of glacier mass balance, we apply a degree-day model to simulate the mass balance of Urumqi Glacier No. 1 for t...In order to verify the feasibility and stability of a degree-day model on simulating the long time series of glacier mass balance, we apply a degree-day model to simulate the mass balance of Urumqi Glacier No. 1 for the period 1987/1988-2007/2008 based on temperature and precipitation data from a nearby climate station. The model is calibrated by simulating point measurements of mass bal- ance, mass balance profiles, and mean specific mass balance during 1987/1988-1996/1997. The opti- mized parameters are obtained by using a least square method to make the model fit the measured mass balance through the model calibration. The model validation （1997/1998-2007/2008） indicates that the modeled results are in good agreement with the observations. The static mass balance sensitiv- ity of Urumqi Glacier No. 1 is analyzed by computing the mass balance of the glacier for a temperature increase of 1℃, with and without a 5% precipitation increase, and the values for the east branch are -0.80 and -0.87 m w.e. a-1℃-1, respectively, and for the west branch, the values are -0.68 and -0.74 m w.e. a-1℃-1, respectively. Moreover, the analysis of the parameter stability indicates that the parame- ters in the model determined from the current climate condition can be applied in the prediction of the future mass balance changes for the glacier and provide a reference for extending the model to other small glaciers in western China.展开更多
Toprovide a theoretical basis for optimizing the pervaporation procedure, a mass transfer model for pervaporation for binary mixtures was developed basedon the multi-fields synergy theory. This model used the mechanis...Toprovide a theoretical basis for optimizing the pervaporation procedure, a mass transfer model for pervaporation for binary mixtures was developed basedon the multi-fields synergy theory. This model used the mechanism of sorption-diffusion-desorption and introduced a diffusion coefficient, which was dependent on the feed concentration and temperature. Regarding the strong coupling effect in the mass transfer, the concentration distribution in membrane was predicted using the Flory-Huggins thermodynamic theory. The batch experiments and other experiments with constant composition-were conducted-using a modified chitosan pervaporatioffmembrane to separate tert-butyl alcohol （TBA）-water mixtures. The parameters of the mass transfer model were obtained from the flux of the experiments with a constant composition and the activity coefficients available through phase equilibrium equation, using the Willson equation in the feed side and the Flory-Huggins thermodynamic theory within the membrane The simulation results of the experiments .are in good agreement with the results, of the experiments.展开更多
In the electric arc furnace （EAF） steel production processes, scrap steel is principally used as a raw material instead of iron ore. In the steelmaking process with EAF, scrap is first melted in the furnace and then...In the electric arc furnace （EAF） steel production processes, scrap steel is principally used as a raw material instead of iron ore. In the steelmaking process with EAF, scrap is first melted in the furnace and then the desired chemical composition of the steel can be obtained in a special furnace such as ladle furnace （LF）. This kind of furnace process is used for the secondary refining of alloy steel. LF furnace offers strong heating fluxes and enables precise temperature control, thereby allowing for the addition of desired amounts of various alloying elements. It also provides outstanding desulfurization at high-temperature treatment by reducing molten steel fluxes and removing deoxidation products. Elemental analysis with mass balance modeling is important to know the precise amount of required alloys for the LF input with respect to scrap composition. In present study, chemical reactions with mass conservation law in EAF and LF were modeled altogether as a whole system and chemical compositions of the final steel alloy output can be obtained precisely according to different scrap compositions, alloying elements ratios, and other input amounts. Besides, it was found that the mass efficiency for iron element in the system is 95.93%. These efficiencies are calculated for all input elements as 8. 45% for C, 30.31% for Si, 46.36% for Mn, 30.64% for P, 41.96% for S, and 69.79% for Cr, etc. These efficiencies provide valuable ideas about the amount of the input materials that are vanished or combusted for 100 kg of each of the input materials in the EAF and LF system.展开更多
A water model with a geometric similarity ratio of 1：5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a...A water model with a geometric similarity ratio of 1：5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a NaOH solution bath. The flow field, volumetric mass transfer coefficient per unit volume （Ak/V; where A is the contact area between phases, V is the volume, and k is the mass transfer coeffi- cient）, and gas utilization ratio （t/） were then measured at different gas flow rates and blow angles. The results showed that the flow field could be divided into five regions, i.e., injection, strong loop, weak loop, splashing, and dead zone. Whereas the Ak/V of the bath increased and then decreased with increasing gas flow rate, and n steadily increased. When the converter was rotated clockwise, both Ak/F and t/increased. However, the flow condition deteriorated when the gas flow rate and blow angle were drastically increased. Therefore, these para- meters must be controlled to optimal conditions. In the proposed model, the optimal gas flow rate and blow angle were 7.5 m3.h-1 and 10°, respectively.展开更多
Spontaneous alpha oscillations are a ubiquitous phenomenon in the brain and play a key role in neural information processing and various cognitive functions.Jansen＇s neural mass model（NMM） was initially proposed to...Spontaneous alpha oscillations are a ubiquitous phenomenon in the brain and play a key role in neural information processing and various cognitive functions.Jansen＇s neural mass model（NMM） was initially proposed to study the origin of alpha oscillations.Most of previous studies of the spontaneous alpha oscillations in the NMM were conducted using numerical methods.In this study,we aim to propose an analytical approach using the describing function method to elucidate the spontaneous alpha oscillation mechanism in the NMM.First,the sigmoid nonlinear function in the NMM is approximated by its describing function,allowing us to reformulate the NMM and derive its standard form composed of one nonlinear part and one linear part.Second,by conducting a theoretical analysis,we can assess whether or not the spontaneous alpha oscillation would occur in the NMM and,furthermore,accurately determine its amplitude and frequency.The results reveal analytically that the interaction between linearity and nonlinearity of the NMM plays a key role in generating the spontaneous alpha oscillations.Furthermore,strong nonlinearity and large linear strength are required to generate the spontaneous alpha oscillations.展开更多
Conductivities of lithium bis（oxalato）borate （LiBOB）-ethyl carbonate （EC）/diethyl carbonaten （DEC） electrolytes at 25℃ and 50℃ were studied. The electrolyte component with the highest conductivity at each te...Conductivities of lithium bis（oxalato）borate （LiBOB）-ethyl carbonate （EC）/diethyl carbonaten （DEC） electrolytes at 25℃ and 50℃ were studied. The electrolyte component with the highest conductivity at each temperature was obtained through changing the concentration of LiBOB and the ratio of EC/DEC. The mass triangle model was applied to calculate the conductivity of Li- BOB-EC/DEC ternary system at 25℃ and 50℃. The results show that the calculated and experimental results have reached a good agreement. Therefore, it is expected that the experimental work can be vastly reduced by introducing the mass triangle model.展开更多
Underground space utilization and exploration is an irreversible trend for promoting sustainable development especially in megacities.Geotechnical engineering safety is always one of the most important issues in all p...Underground space utilization and exploration is an irreversible trend for promoting sustainable development especially in megacities.Geotechnical engineering safety is always one of the most important issues in all phases,including planning,design,construction and operation,of the underground project.展开更多
Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect be...Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.展开更多
The reverse osmosis process has been applied in large industrial fields （water treatment, food industry, biotechnology, and ect.）. Despite, this progress more investigation are required to optimize the reverse osmos...The reverse osmosis process has been applied in large industrial fields （water treatment, food industry, biotechnology, and ect.）. Despite, this progress more investigation are required to optimize the reverse osmosis process. The present paper deals the modeling of mass transfer in a cavity limited by a semi-permeable membrane. Mass conservation and momentum balances are developed, dimensionless and control volume method has been applied. The velocity and concentration profiles versus the Reynolds number and Sherwood are studied. The results show that the permeability of the membrane decreases as function of the transversal （radial） component of the velocity. The axial （tangential） component of the velocity presents a good stability along the thickness of the cavity; this phenomenon can be attributed to the zero gradient of the tangential velocity. These preliminary results show that the phenomenon of the concentration polarization affects the mass transfer coefficient in a channel. Current study has considered the cavity without a promoter of the turbulence; whereas, the design of the spacer has an important role on mass transfer coefficient in the reverse osmosis module. Our next interest is the integration of the spacer in the cavity, and the study of the effect of its design on the concentration and velocity profiles and the mass transfer coefficient through the reverse osmosis membrane.展开更多
In this study,the fluid flow and mixing process in an impinging stream-rotating packed bed(IS-RPB)is simulated by using a new three-dimensional computational fluid dynamics model.Specifically,the gaseliquid flow is si...In this study,the fluid flow and mixing process in an impinging stream-rotating packed bed(IS-RPB)is simulated by using a new three-dimensional computational fluid dynamics model.Specifically,the gaseliquid flow is simulated by the Euler-Euler model,the hydrodynamics of the reactor is predicted by the RNG k-εmethod,and the high-gravity environment is simulated by the sliding mesh model.The turbulent mass transfer process is characterized by the concentration variance c^(2) and its dissipation rateεc formulations,and therefore the turbulent mass diffusivity can be directly obtained.The simulated segregation index Xs is in agreement with our previous experimental results.The simulated results reveal that the fringe effect of IS can be offset by the end effect at the inner radius of RPB,so the investigation of the coupling mechanism between IS and RPB is critical to intensify the mixing process in IS-RPB.展开更多
Fish cage systems are influenced by various oceanic conditions, and the movements and deformation of the system by the external forces can affect the safety of the system itself, as well as the species of fish being c...Fish cage systems are influenced by various oceanic conditions, and the movements and deformation of the system by the external forces can affect the safety of the system itself, as well as the species of fish being cultivated. Structural durability of the system against environmental factors has been major concern for the marine aquaculture system. In this research, a mathematical model and a simulation method were presented for analyzing the performance of the large-scale fish cage system influenced by current and waves. The cage system consisted of netting, mooring ropes, floats, sinkers and floating collar. All the elements were modeled by use of the mass-spring model. The structures were divided into finite elements and mass points were placed at the mid-point of each element, and mass points were connected by springs without mass. Each mass point was applied to external and internal forces, and total force was calculated in every integration step. The computation method was applied to the dynamic simulation of the actual fish cage systems rigged with synthetic fiber and copper wire simultaneously influenced by current and waves. Here, we also tried to find a relevant ratio between buoyancy and sinking force of the fish cages. The simulation results provide improved understanding of the behavior of the structure and valuable information concerning optimum ratio of the buoyancy to sinking force according to current speeds.展开更多
Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surfac...Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.展开更多
In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples...In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.展开更多
Based on the similarity theory, taking the horseshoe, city-gate and round linings as examples, the value and distribution regularities of normal frost heaving pressures （hereinafter as frost heaving pressures） in tu...Based on the similarity theory, taking the horseshoe, city-gate and round linings as examples, the value and distribution regularities of normal frost heaving pressures （hereinafter as frost heaving pressures） in tunnels excavated in fractured rock mass in cold regions under different constraints and freezing depths were studied by a test model. It was found that the larger the frozen depth, the larger the frost heaving pressure, and the stronger the top constraint, the larger the frost heaving pressure. For the horseshoe lining and city-gate lining, the top constraint has a greater effect on the frost heaving pressures on the arch and the inverted arch. For the round lining, the influences of the top constraint on the frost heaving pressure in all linings are almost the same. The frost heaving pressure is maximum on the city-gate lining and minimal on the round lining. The largest frost heaving pressure all occur near the foot of the inverted arch for the three kinds of lining. Thus, the test data basically coincide with the observed in situ data.展开更多
文摘An analytic phenomenological shell model mass formula for light nuclei is constructed. The formula takes into account the non locality of the self consistent single particle potential and the special features of light nuclei, namely： （a） charge and mass distributions are closer to a Gaussian shape than to the shape characteristic in medium and heavy nuclei; （b） the central charge and mass densities are larger than, and decrease towards, the ＂asymptotic＂ values that are the reference parameters for nuclear matter; and （c） after a shell closure, the next level has a larger orbital angular momentum and a noticeably larger mean square radius. Only then a good numerical fit is obtained with parameters consistent with optical model analysis and empirical spin-orbit couplings. A correlation between the ＂skin effect＂ and the symmetry dependence of the optical potential is established. Towards the neutron drip line the potential well depth, the spin-orbit splitting of the single particle levels and the gap between major shells decrease, as has been observed. The ensuing shift and contraction of the single particle level scheme may lead to： （a） to strong configuration mixing and new magic numbers, and （b） the onset of the halo effect, to avoid the expulsion of single particle levels to the continuum.
文摘The Standard Model of particle physics requires nine lepton and quark masses as inputs, but does not incorporate neutrino masses required by neutrino oscillation observations. This analysis addresses these problems, explaining Standard Model particle masses by describing fundamental particles as solutions of Einstein’s equations, with radii 1/4 their Compton wavelength and half of any charge on rotating particles located on the surface at each end of the axis of rotation. The analysis relates quark and lepton masses to electron charge and mass, and identifies neutrino masses consistent with neutrino oscillation observations.
基金the Shanghai Educational Sciences Research Program(No.C2021016)。
文摘The proposed mass model of vocal fold vibration holds a significant importance in the auxiliary diagnosis and treatment of human vocal fold disorders.Mathematical models are proposed in aerodynamics and acoustics to simulate vocal fold vibration during phonation.This has always been a hot topic in pathological linguistics research.Over the past few decades,researchers have designed various types of mass models of vocal fold vibration based on experiments.These models differ in principles,computational complexity,and degrees of freedom.Therefore,we classify and describe the mass models according to modeling methods.We summarize the research status and characteristics of different models,and based on this,we look forward to future research directions for vocal fold mass models.
基金supported by the National Natural Science Foundation of China(Nos.U2267205 and 12475124)a ZSTU intramural grant(22062267-Y)Excellent Graduate Thesis Cultivation Fund(LW-YP2024011).
文摘Nuclear mass is an important property in both nuclear and astrophysics.In this study,we explore an improved mass model that incorporates a higher-order term of symmetry energy using algorithms.The sequential least squares programming(SLSQP)algorithm augments the precision of this multinomial mass model by reducing the error from 1.863 MeV to 1.631 MeV.These algorithms were further examined using 200 sample mass formulae derived from theδE term of the E_(isospin) mass model.The SLSQP method exhibited superior performance compared to the other algorithms in terms of errors and convergence speed.This algorithm is advantageous for handling large-scale multiparameter optimization tasks in nuclear physics.
文摘A three mass model of vocal cords as well as mathematical expression of the model are discussed. Different kinds of typical hoarse speech due to laryngeal diseases are simulated on microcomputer and the effects of different pathological factors of vocal cords on model parameters are studied. Some typical spectrum distribution of the simulated speech signals are given. Moreover, hoarse speech signals of some typical cases are analyzed by the methods of digital signal processing, including FFT, LPC, Cepstrum technique, Pseudocolor encoding, etc. The experiment results show that the three mass model analysis of vocal cords is an efficient method for analysis of hoarse speech signals.
基金the Nuclear Waste Management Organization (NWMO) of Canadathe National Science and Engineering Research Council (NSERC)+1 种基金the Canadian Ministry of National Defence (DND)the RMC Green Team for funding this research
文摘The main objective of this paper is to examine the influence of the applied confining stress on the rock mass modulus of moderately jointed rocks（well interlocked undisturbed rock mass with blocks formed by three or less intersecting joints）. A synthetic rock mass modelling（SRM） approach is employed to determine the mechanical properties of the rock mass. In this approach, the intact body of rock is represented by the discrete element method（DEM）-Voronoi grains with the ability of simulating the initiation and propagation of microcracks within the intact part of the model. The geometry of the preexisting joints is generated by employing discrete fracture network（DFN） modelling based on field joint data collected from the Brockville Tunnel using LiDAR scanning. The geometrical characteristics of the simulated joints at a representative sample size are first validated against the field data, and then used to measure the rock quality designation（RQD）, joint spacing, areal fracture intensity（P21）, and block volumes. These geometrical quantities are used to quantitatively determine a representative range of the geological strength index（GSI）. The results show that estimating the GSI using the RQD tends to make a closer estimate of the degree of blockiness that leads to GSI values corresponding to those obtained from direct visual observations of the rock mass conditions in the field. The use of joint spacing and block volume in order to quantify the GSI value range for the studied rock mass suggests a lower range compared to that evaluated in situ. Based on numerical modelling results and laboratory data of rock testing reported in the literature, a semi-empirical equation is proposed that relates the rock mass modulus to confinement as a function of the areal fracture intensity and joint stiffness.
基金supported by the Knowledge Innovation Project of the Chinese Academy of Sciences (No. KZCX2-EW-311)the National Basic Research Program of China (No. 2007CB411501)the National Natural Science Foundation of China (Nos. 1141001040, J0930003/J0109)
文摘In order to verify the feasibility and stability of a degree-day model on simulating the long time series of glacier mass balance, we apply a degree-day model to simulate the mass balance of Urumqi Glacier No. 1 for the period 1987/1988-2007/2008 based on temperature and precipitation data from a nearby climate station. The model is calibrated by simulating point measurements of mass bal- ance, mass balance profiles, and mean specific mass balance during 1987/1988-1996/1997. The opti- mized parameters are obtained by using a least square method to make the model fit the measured mass balance through the model calibration. The model validation （1997/1998-2007/2008） indicates that the modeled results are in good agreement with the observations. The static mass balance sensitiv- ity of Urumqi Glacier No. 1 is analyzed by computing the mass balance of the glacier for a temperature increase of 1℃, with and without a 5% precipitation increase, and the values for the east branch are -0.80 and -0.87 m w.e. a-1℃-1, respectively, and for the west branch, the values are -0.68 and -0.74 m w.e. a-1℃-1, respectively. Moreover, the analysis of the parameter stability indicates that the parame- ters in the model determined from the current climate condition can be applied in the prediction of the future mass balance changes for the glacier and provide a reference for extending the model to other small glaciers in western China.
基金Supported by the Key Project of National Natural Science Foundation of China （No.20436040）, and the National Natural Science Foundation of China （No.20476084, No.20776117）.
文摘Toprovide a theoretical basis for optimizing the pervaporation procedure, a mass transfer model for pervaporation for binary mixtures was developed basedon the multi-fields synergy theory. This model used the mechanism of sorption-diffusion-desorption and introduced a diffusion coefficient, which was dependent on the feed concentration and temperature. Regarding the strong coupling effect in the mass transfer, the concentration distribution in membrane was predicted using the Flory-Huggins thermodynamic theory. The batch experiments and other experiments with constant composition-were conducted-using a modified chitosan pervaporatioffmembrane to separate tert-butyl alcohol （TBA）-water mixtures. The parameters of the mass transfer model were obtained from the flux of the experiments with a constant composition and the activity coefficients available through phase equilibrium equation, using the Willson equation in the feed side and the Flory-Huggins thermodynamic theory within the membrane The simulation results of the experiments .are in good agreement with the results, of the experiments.
文摘In the electric arc furnace （EAF） steel production processes, scrap steel is principally used as a raw material instead of iron ore. In the steelmaking process with EAF, scrap is first melted in the furnace and then the desired chemical composition of the steel can be obtained in a special furnace such as ladle furnace （LF）. This kind of furnace process is used for the secondary refining of alloy steel. LF furnace offers strong heating fluxes and enables precise temperature control, thereby allowing for the addition of desired amounts of various alloying elements. It also provides outstanding desulfurization at high-temperature treatment by reducing molten steel fluxes and removing deoxidation products. Elemental analysis with mass balance modeling is important to know the precise amount of required alloys for the LF input with respect to scrap composition. In present study, chemical reactions with mass conservation law in EAF and LF were modeled altogether as a whole system and chemical compositions of the final steel alloy output can be obtained precisely according to different scrap compositions, alloying elements ratios, and other input amounts. Besides, it was found that the mass efficiency for iron element in the system is 95.93%. These efficiencies are calculated for all input elements as 8. 45% for C, 30.31% for Si, 46.36% for Mn, 30.64% for P, 41.96% for S, and 69.79% for Cr, etc. These efficiencies provide valuable ideas about the amount of the input materials that are vanished or combusted for 100 kg of each of the input materials in the EAF and LF system.
基金financially supported by the National Natural Science Foundation of China(No.51504018)the China Postdoctoral Science Foundation(2015M580986)the Fundamental Research Funds for the Central Universities(FRF-TP-17-038A2)
文摘A water model with a geometric similarity ratio of 1：5 was developed to investigate the gas-liquid mass transfer and flow charac- teristics in a Peirce-Smith converter. A gas mixture of CO2 and Ar was injected into a NaOH solution bath. The flow field, volumetric mass transfer coefficient per unit volume （Ak/V; where A is the contact area between phases, V is the volume, and k is the mass transfer coeffi- cient）, and gas utilization ratio （t/） were then measured at different gas flow rates and blow angles. The results showed that the flow field could be divided into five regions, i.e., injection, strong loop, weak loop, splashing, and dead zone. Whereas the Ak/V of the bath increased and then decreased with increasing gas flow rate, and n steadily increased. When the converter was rotated clockwise, both Ak/F and t/increased. However, the flow condition deteriorated when the gas flow rate and blow angle were drastically increased. Therefore, these para- meters must be controlled to optimal conditions. In the proposed model, the optimal gas flow rate and blow angle were 7.5 m3.h-1 and 10°, respectively.
基金Project supported by the National Natural Science Foundation of China(Grant No.61473208)the Tianjin Research Program of Application Foundation and Advanced Technology,China(Grant No.15JCYBJC47700)+1 种基金the National Institutes of Health,USA(Grant Nos.R01DA040990 and R01EY027544)the Project of Humanities and Social Sciences from the Ministry of Education,China(Grant No.17YJAZH092)
文摘Spontaneous alpha oscillations are a ubiquitous phenomenon in the brain and play a key role in neural information processing and various cognitive functions.Jansen＇s neural mass model（NMM） was initially proposed to study the origin of alpha oscillations.Most of previous studies of the spontaneous alpha oscillations in the NMM were conducted using numerical methods.In this study,we aim to propose an analytical approach using the describing function method to elucidate the spontaneous alpha oscillation mechanism in the NMM.First,the sigmoid nonlinear function in the NMM is approximated by its describing function,allowing us to reformulate the NMM and derive its standard form composed of one nonlinear part and one linear part.Second,by conducting a theoretical analysis,we can assess whether or not the spontaneous alpha oscillation would occur in the NMM and,furthermore,accurately determine its amplitude and frequency.The results reveal analytically that the interaction between linearity and nonlinearity of the NMM plays a key role in generating the spontaneous alpha oscillations.Furthermore,strong nonlinearity and large linear strength are required to generate the spontaneous alpha oscillations.
基金supported by the National Natural Science Foundation of China(No.50472093)
文摘Conductivities of lithium bis（oxalato）borate （LiBOB）-ethyl carbonate （EC）/diethyl carbonaten （DEC） electrolytes at 25℃ and 50℃ were studied. The electrolyte component with the highest conductivity at each temperature was obtained through changing the concentration of LiBOB and the ratio of EC/DEC. The mass triangle model was applied to calculate the conductivity of Li- BOB-EC/DEC ternary system at 25℃ and 50℃. The results show that the calculated and experimental results have reached a good agreement. Therefore, it is expected that the experimental work can be vastly reduced by introducing the mass triangle model.
文摘Underground space utilization and exploration is an irreversible trend for promoting sustainable development especially in megacities.Geotechnical engineering safety is always one of the most important issues in all phases,including planning,design,construction and operation,of the underground project.
基金supported by the Natural Science Foundation of Sichuan Province(No.2022NSFSC1042)National Natural Science Foundation of China(No.52200051)+1 种基金Outstanding Youth Fund of Heilongjiang Natural Science Foundation(No.YQ2023E021)Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.HC202236).
文摘Thin-film composite(TFC)reverse osmosis(RO)membranes have attracted considerable attention in water treatment and desalination processes due to their specific separation advantages.Nevertheless,the trade-off effect between water flux and salt rejection poses huge challenges to further improvement in TFC RO membrane performance.Numerous research works have been dedicated to optimizing membrane fabrication and modification for addressing this issue.In the meantime,several reviews summarized these approaches.However,the existing reviews seldom analyzed these methods from a theoretical perspective and thus failed to offer effective optimization directions for the RO process from the root cause.In this review,we first propose a mass transfer model to facilitate a better understanding of the entire process of how water and solute permeate through RO membranes in detail,namely the migration process outside the membrane,the dissolution process on the membrane surface,and the diffusion process within the membrane.Thereafter,the water and salt mass transfer behaviors obtained from model deduction are comprehensively analyzed to provide potential guidelines for alleviating the trade-off effect between water flux and salt rejection in the RO process.Finally,inspired by the theoretical analysis and the accurate identification of existing bottlenecks,several promising strategies for both regulating RO membranes and optimizing operational conditions are proposed to further exploit the potential of RO membrane performance.This review is expected to guide the development of high-performance RO membranes from a mass transfer theory standpoint.
文摘The reverse osmosis process has been applied in large industrial fields （water treatment, food industry, biotechnology, and ect.）. Despite, this progress more investigation are required to optimize the reverse osmosis process. The present paper deals the modeling of mass transfer in a cavity limited by a semi-permeable membrane. Mass conservation and momentum balances are developed, dimensionless and control volume method has been applied. The velocity and concentration profiles versus the Reynolds number and Sherwood are studied. The results show that the permeability of the membrane decreases as function of the transversal （radial） component of the velocity. The axial （tangential） component of the velocity presents a good stability along the thickness of the cavity; this phenomenon can be attributed to the zero gradient of the tangential velocity. These preliminary results show that the phenomenon of the concentration polarization affects the mass transfer coefficient in a channel. Current study has considered the cavity without a promoter of the turbulence; whereas, the design of the spacer has an important role on mass transfer coefficient in the reverse osmosis module. Our next interest is the integration of the spacer in the cavity, and the study of the effect of its design on the concentration and velocity profiles and the mass transfer coefficient through the reverse osmosis membrane.
基金supported by the National Natural Science Foundation of China (22208328, 22378370 and 22108261)Fundamental Research Program of Shanxi Province(20210302124618)
文摘In this study,the fluid flow and mixing process in an impinging stream-rotating packed bed(IS-RPB)is simulated by using a new three-dimensional computational fluid dynamics model.Specifically,the gaseliquid flow is simulated by the Euler-Euler model,the hydrodynamics of the reactor is predicted by the RNG k-εmethod,and the high-gravity environment is simulated by the sliding mesh model.The turbulent mass transfer process is characterized by the concentration variance c^(2) and its dissipation rateεc formulations,and therefore the turbulent mass diffusivity can be directly obtained.The simulated segregation index Xs is in agreement with our previous experimental results.The simulated results reveal that the fringe effect of IS can be offset by the end effect at the inner radius of RPB,so the investigation of the coupling mechanism between IS and RPB is critical to intensify the mixing process in IS-RPB.
基金supported by the National Research Foundation of Korea Grant founded by the Korean Government(MEST)(Grant No.NRF-2013R1A1A4A01011445)
文摘Fish cage systems are influenced by various oceanic conditions, and the movements and deformation of the system by the external forces can affect the safety of the system itself, as well as the species of fish being cultivated. Structural durability of the system against environmental factors has been major concern for the marine aquaculture system. In this research, a mathematical model and a simulation method were presented for analyzing the performance of the large-scale fish cage system influenced by current and waves. The cage system consisted of netting, mooring ropes, floats, sinkers and floating collar. All the elements were modeled by use of the mass-spring model. The structures were divided into finite elements and mass points were placed at the mid-point of each element, and mass points were connected by springs without mass. Each mass point was applied to external and internal forces, and total force was calculated in every integration step. The computation method was applied to the dynamic simulation of the actual fish cage systems rigged with synthetic fiber and copper wire simultaneously influenced by current and waves. Here, we also tried to find a relevant ratio between buoyancy and sinking force of the fish cages. The simulation results provide improved understanding of the behavior of the structure and valuable information concerning optimum ratio of the buoyancy to sinking force according to current speeds.
文摘Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.
基金Supported by the Natural Basic Research Program of China(No.2005CB422207)the Fund of Eco-enviromental Impacts and Protection in Devoloping and Utilizing of Oil-shale Resources(No.OSR-01-06)
文摘In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.
文摘Based on the similarity theory, taking the horseshoe, city-gate and round linings as examples, the value and distribution regularities of normal frost heaving pressures （hereinafter as frost heaving pressures） in tunnels excavated in fractured rock mass in cold regions under different constraints and freezing depths were studied by a test model. It was found that the larger the frozen depth, the larger the frost heaving pressure, and the stronger the top constraint, the larger the frost heaving pressure. For the horseshoe lining and city-gate lining, the top constraint has a greater effect on the frost heaving pressures on the arch and the inverted arch. For the round lining, the influences of the top constraint on the frost heaving pressure in all linings are almost the same. The frost heaving pressure is maximum on the city-gate lining and minimal on the round lining. The largest frost heaving pressure all occur near the foot of the inverted arch for the three kinds of lining. Thus, the test data basically coincide with the observed in situ data.
