We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-or...We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-order compact finite difference method and the fourth-order average vector field method, finely describes the condensate wave function and physical characteristics in some small potential wells. Numerical experiments are presented to demonstrate that our numerical scheme is efficient by the comparison with the Fourier pseudo-spectral method. Moreover, it preserves several conservation laws well and even exactly under some specific conditions.展开更多
For studying the carbon thermal reduction rules of titanium in hot metal and providing a theoretical basis for the blast furnace（BF） hearth protection, the distribution behavior of titanium between low-titanium slag...For studying the carbon thermal reduction rules of titanium in hot metal and providing a theoretical basis for the blast furnace（BF） hearth protection, the distribution behavior of titanium between low-titanium slag system of CaO-SiO2-MgO-Al2O3-TiO2 and hot metal was studied using analytical reagents in a temperature range from 1350 °C to 1600 °C. Through high temperature melting, rapid quenching, chemical analysis and thermodynamic model calculating, the results showed that the increase of reaction temperature, which improved the titanium distribution L（Ti） and lowered the system activity coefficient γsys, leads to the rise of equilibrium constant. Combined with Wagner and congregated electron phase models, the data obtained in distribution experiments were used to fit out the Gibbs free energy formula of titanium carbothermic reduction. Finally, the relations between the contents of Si and Ti in hot metal and the titanium load to reach the minimum w（Ti） for the formation of Ti C were given.展开更多
Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increas...Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.展开更多
The core technology in an intelligent video surveillance system is that detecting and recognizing abnormal behaviors timely and accurately.The key breakthrough point in recognizing abnormal behaviors is how to obtain ...The core technology in an intelligent video surveillance system is that detecting and recognizing abnormal behaviors timely and accurately.The key breakthrough point in recognizing abnormal behaviors is how to obtain the effective features of the picture,so as to solve the problem of recognizing them.In response to this difficulty,this paper introduces an adjustable jump link coefficients model based on the residual network.The effective coefficients for each layer of the network can be set after using this model to further improving the recognition accuracy of abnormal behavior.A convolution kernel of 1×1 size is added to reduce the number of parameters for the purpose of improving the speed of the model in this paper.In order to reduce the noise of the data edge,and at the same time,improve the accuracy of the data and speed up the training,a BN(Batch Normalization)layer is added before the activation function in this network.This paper trains this network model on the public ImageNet dataset,and then uses the transfer learning method to recognize these abnormal behaviors of human in the UTI behavior dataset processed by the YOLO_v3 target detection network.Under the same experimental conditions,compared with the original ResNet-50 model,the improved model in this paper has a 2.8%higher accuracy in recognition of abnormal behaviors on the public UTI dataset.展开更多
The research of groundwater vulnerability is the basic work to protect the groundwater. For utilizing groundwater resource continuably, groundwater vulnerability evaluation is necessary. Useful reference to protect, e...The research of groundwater vulnerability is the basic work to protect the groundwater. For utilizing groundwater resource continuably, groundwater vulnerability evaluation is necessary. Useful reference to protect, exploit and utilize on groundwater resource are provided rationally. According to the real condition of Sanjiang Plain, the indexes system is established based on the traditional DRASTIC model. The new system includes the following seven indexes： Depth of Water, Net Recharge, Aquifer Media, Soil Media, Conductivity of the Aquifer, Land Utilizing Ratio and Populace Density. The related analysis appears that the system is rather reasonable. Because traditional methods, such as analytic hierarchy process and fuzzy mathematics theory, can＇t be avoided human interference in selection of weights, they could lead to an imprecise result. In order to evaluate the groundwater vulnerability reasonably, entropy weight coefficient method is applied for the first time, which provides a new way to groundwater vulnerability evaluation. The method is a model whose weights are insured by the calculation process, so the artificial disturb can be avoided. It has been used to evaluate the groundwater vulnerability in Sanjiang Plain. The satisfied result is acquired. Comparably, the same result is acquired by the other method named projection pursuit evaluation based on real-coded accelerating genetic algorithm. It shows that entropy weight coefficient method is applicable on groundwater vulnerability evaluation. The evaluation result can provide reference on the decision-making departments.展开更多
Background： Measurements of tree heights and diameters are essential in forest assessment and modelling. Tree heights are used for estimating timber volume, site index and other important variables related to forest ...Background： Measurements of tree heights and diameters are essential in forest assessment and modelling. Tree heights are used for estimating timber volume, site index and other important variables related to forest growth and yield, succession and carbon budget models. However, the diameter at breast height （dbh） can be more accurately obtained and at lower cost, than total tree height. Hence, generalized height-diameter （h-d） models that predict tree height from dbh, age and other covariates are needed. For a more flexible but biologically plausible estimation of covariate effects we use shape constrained generalized additive models as an extension of existing h-d model approaches. We use causal site parameters such as index of aridity to enhance the generality and causality of the models and to enable predictions under projected changeable climatic conditions. Methods： We develop unconstrained generalized additive models （GAM） and shape constrained generalized additive models （SCAM） for investigating the possible effects of tree-specific parameters such as tree age, relative diameter at breast height, and site-specific parameters such as index of aridity and sum of daily mean temperature during vegetation period, on the h-d relationship of forests in Lower Saxony, Germany. Results： Some of the derived effects, e.g. effects of age, index of aridity and sum of daily mean temperature have significantly non-linear pattern. The need for using SCAM results from the fact that some of the model effects show partially implausible patterns especially at the boundaries of data ranges. The derived model predicts monotonically increasing levels of tree height with increasing age and temperature sum and decreasing aridity and social rank of a tree within a stand, The definition of constraints leads only to marginal or minor decline in the model statistics like AIC An observed structured spatial trend in tree height is modelled via 2-dimensional surface fitting. Conclusions： We demonstrate that the SCAM approach allows optimal regression modelling flexibility similar to the standard GAM but with the additional possibility of defining specific constraints for the model effects. The longitudinal character of the model allows for tree height imputation for the current status of forests but also for future tree height prediction.展开更多
In this paper,the estimation for a class of generalized varying coefficient models with error-prone covariates is considered.By combining basis function approximations with some auxiliary variables,an instrumental var...In this paper,the estimation for a class of generalized varying coefficient models with error-prone covariates is considered.By combining basis function approximations with some auxiliary variables,an instrumental variable type estimation procedure is proposed.The asymptotic results of the estimator,such as the consistency and the weak convergence rate,are obtained.The proposed procedure can attenuate the effect of measurement errors and have proved workable for finite samples.展开更多
Physical mechanisms and influencing factors on the effective stress coefficient for rock/soil-like porous materials are investigated, based on which equivalent connectivity index is proposed. The equivalent connectivi...Physical mechanisms and influencing factors on the effective stress coefficient for rock/soil-like porous materials are investigated, based on which equivalent connectivity index is proposed. The equivalent connectivity index, relying on the meso-scale structure of porous material and the property of liquid, denotes the connectivity of pores in Representative Element Area （REA）. If the conductivity of the porous material is anisotropic, the equivalent connectivity index is a second order tensor. Based on the basic theories of continuous mechanics and tensor analysis, relationship between area porosity and volumetric porosity of porous materials is deduced. Then a generalized expression, describing the relation between effective stress coefficient tensor and equivalent connectivity tensor of pores, is proposed, and the expression can be applied to isotropic media and also to anisotropic materials. Furthermore, evolution of porosity and equivalent connectivity index of the pore are studied in the strain space, and the method to determine the corresponding functions in expressions above is proposed using genetic algorithm and genetic programming. Two applications show that the results obtained by the method in this paper perfectly agree with the test data. This paper provides an important theoretical support to the coupled hydro-mechanical research.展开更多
A model of damage to fresh concrete in a corrosive sulphate environment was formulated to investigate how and why the strength of corroded concrete changes over time. First, a corroded concrete block was divided into ...A model of damage to fresh concrete in a corrosive sulphate environment was formulated to investigate how and why the strength of corroded concrete changes over time. First, a corroded concrete block was divided into three regions: an expanded and dense region; a crack-development region; and a noncorroded region. Second, based on the thickness of the surface corrosion layer and the rate of loss of compressive strength of the corroding region, a computational model of the concrete blocks' corrosion-resistance coefficient of compressive strength in a sulphate environment was generated. Third, experimental tests of the corrosion of concrete were conducted by immersing specimens in a corrosive medium for 270 d. A comparison of the experimental results with the computational formulae shows that the calculation results and test results are in good agreement. A parameter analysis reveals that the corrosion reaction plays a major role in the corrosion of fresh concrete containing ordinary Portland cement,but the diffusion of the corrosion medium plays a major role in the corrosion of concrete mixtures containing fly ash and sulphate-resistant cement. Fresh concrete with a high water-to-cement ratio shows high performance during the whole experiment process whereas fresh concrete with a low water-to-cement ratio shows poor performance during the late experiment period.展开更多
The molecular biomechanics of DNA ejection from bacteriophage is of interest to not only fundamental biological understandings but also practical applications such as the design of advanced site-specific and controlla...The molecular biomechanics of DNA ejection from bacteriophage is of interest to not only fundamental biological understandings but also practical applications such as the design of advanced site-specific and controllable drug delivery systems. In this paper, we analyze the viscous motion of a semiflexible polymer chain coming out of a strongly confined space as a model to investigate the effects of various structure confinements and frictional resistances encountered during the DNA ejection process. The theoretically predicted relations between the ejection speed, ejection time, ejection length, and other physical parameters, such as the phage type, total genome length and ionic state of external buffer solutions, show excellent agreement with in vitro experimental observations in the literature.展开更多
A linear semi-continuum model with discrete atomic layers in the thickness direction was developed to investigate the bending behaviors of ultra-thin beams with nanoscale thickness.The theoretical results show that th...A linear semi-continuum model with discrete atomic layers in the thickness direction was developed to investigate the bending behaviors of ultra-thin beams with nanoscale thickness.The theoretical results show that the deflection of an ultra-thin beam may be enhanced or reduced due to different relaxation coefficients.If the relaxation coefficient is greater/less than one,the deflection of micro/nano-scale structures is enhanced/reduced in comparison with macro-scale structures.So,two opposite types of size-dependent behaviors are observed and they are mainly caused by the relaxation coefficients.Comparisons with the classical continuum model,exact nonlocal stress model and finite element model （FEM） verify the validity of the present semi-continuum model.In particular,an explanation is proposed in the debate whether the bending stiffness of a micro/nano-scale beam should be greater or weaker as compared with the macro-scale structures.The characteristics of bending stiffness are proved to be associated with the relaxation coefficients.展开更多
L-phenylalanine, one of the nine essential amino acids for the human body, is extensively used as an ingredient in food, pharmaceutical and nutrition industries. A suitable equilibrium model is required for purificati...L-phenylalanine, one of the nine essential amino acids for the human body, is extensively used as an ingredient in food, pharmaceutical and nutrition industries. A suitable equilibrium model is required for purification of L-phenylalanine based on ion-exchange chromatography. In this work, the equilibrium uptake of L-phenylalanine on a strong acid-cation exchanger SH11 was investigated experimentally and theoretically. A modified Donnan ion-exchange （DIX） model, which takes the activiW into account, was established to predict the uptake of L-phenylalanine at various solution pH values. The model parameters including selectivity and mean activity coefficient in the resin phase are presented. The modified DIX model is in good agreement with the experimental data. The optimum operating pH value of 2.0, with the highest t-phenylalanine uptake on the resin, is predicted by the model. This basic information combined with the general mass transfer model will lay the foundation for the prediction of dynamic behavior of fixed bed separation process.展开更多
In this paper,the polymer chain of rotator(PCOR) equation of state(EOS) was used together with an EOS/G^E mixing rule(MHV1) and the Wilson's equation as an excess-Gibbs-energy model in the proposed approach to ext...In this paper,the polymer chain of rotator(PCOR) equation of state(EOS) was used together with an EOS/G^E mixing rule(MHV1) and the Wilson's equation as an excess-Gibbs-energy model in the proposed approach to extend the capability and improve the accuracy of the PCOR EOS for predicting the Henry's constant of solutions containing polymers.The results of the proposed method compared with two equation of state(van der Waals and GC-Flory) and three activity coefficient models(UNIFAC,UNIFAC-FV and Entropic-FV) indicated that the PCOR EOS/Wilson's equation provided more accurate results.The interaction parameters of Wilson's equation were fitted with Henry's constant experimental data and the property parameters of PCOR,a and b,were fitted with experimental volume data(Tait equation).As a result,the present work provided a simple and useful model for prediction of Henry's constant for polymer solutions.展开更多
In this paper, we consider the variable selection for the parametric components of varying coefficient partially linear models with censored data. By constructing a penalized auxiliary vector ingeniously, we propose a...In this paper, we consider the variable selection for the parametric components of varying coefficient partially linear models with censored data. By constructing a penalized auxiliary vector ingeniously, we propose an empirical likelihood based variable selection procedure, and show that it is consistent and satisfies the sparsity. The simulation studies show that the proposed variable selection method is workable.展开更多
Remaining useful life(RUL) prediction is one of the most crucial elements in prognostics and health management(PHM). Aiming at the imperfect prior information, this paper proposes an RUL prediction method based on a n...Remaining useful life(RUL) prediction is one of the most crucial elements in prognostics and health management(PHM). Aiming at the imperfect prior information, this paper proposes an RUL prediction method based on a nonlinear random coefficient regression(RCR) model with fusing failure time data.Firstly, some interesting natures of parameters estimation based on the nonlinear RCR model are given. Based on these natures,the failure time data can be fused as the prior information reasonably. Specifically, the fixed parameters are calculated by the field degradation data of the evaluated equipment and the prior information of random coefficient is estimated with fusing the failure time data of congeneric equipment. Then, the prior information of the random coefficient is updated online under the Bayesian framework, the probability density function(PDF) of the RUL with considering the limitation of the failure threshold is performed. Finally, two case studies are used for experimental verification. Compared with the traditional Bayesian method, the proposed method can effectively reduce the influence of imperfect prior information and improve the accuracy of RUL prediction.展开更多
In this study,three semipredictive activity coefficient models:Wilson,non-random-two liquid model(NRTL),and universal quasi-chemical model(UNIQUAC),have been used for modeling vapor-liquid equilibrium properties of te...In this study,three semipredictive activity coefficient models:Wilson,non-random-two liquid model(NRTL),and universal quasi-chemical model(UNIQUAC),have been used for modeling vapor-liquid equilibrium properties of ternary mixtures that include substances found in alcoholic distillation processes of wine and musts.In particular,vapor-liquid equilibrium in ternary mixtures containing water + ethanol + congener has been modeled using parameters obtained from binary and ternary mixture data.The congeners are substances that although present in very low concentrations,of the order of part per million,are important enological parameters.The results given by these different models have been compared with literature data and conclusions about the accuracy of the models studied are drawn,recommending the best models for correlating and predicting phase equilibrium properties of this type of mixtures.展开更多
In this paper, an efficient shrinkage estimation procedure for the partially linear varying coefficient model (PLVC) with random effect is considered. By selecting the significant variable and estimating the nonzero c...In this paper, an efficient shrinkage estimation procedure for the partially linear varying coefficient model (PLVC) with random effect is considered. By selecting the significant variable and estimating the nonzero coefficient, the model structure specification is accomplished by introducing a novel penalized estimating equation. Under some mild conditions, the asymptotic properties for the proposed model selection and estimation results, such as the sparsity and oracle property, are established. Some numerical simulation studies and a real data analysis are presented to examine the finite sample performance of the procedure.展开更多
Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical str...Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.展开更多
The study of spatial econometrics has developed rapidly and has found wide applications in many different scientific fields,such as demography,epidemiology,regional economics,and psychology.With the deepening of...The study of spatial econometrics has developed rapidly and has found wide applications in many different scientific fields,such as demography,epidemiology,regional economics,and psychology.With the deepening of research,some scholars find that there are some model specifications in spatial econometrics,such as spatial autoregressive(SAR)model and matrix exponential spatial specification(MESS),which cannot be nested within each other.Compared with the common SAR models,the MESS models have computational advantages because it eliminates the need for logarithmic determinant calculation in maximum likelihood estimation and Bayesian estimation.Meanwhile,MESS models have theoretical advantages.However,the theoretical research and application of MESS models have not been promoted vigorously.Therefore,the study of MESS model theory has practical significance.This paper studies the quasi maximum likelihood estimation for matrix exponential spatial specification(MESS)varying coefficient panel data models with fixed effects.It is shown that the estimators of model parameters and function coefficients satisfy the consistency and asymptotic normality to make a further supplement for the theoretical study of MESS model.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11571366 and 11501570the Open Foundation of State Key Laboratory of High Performance Computing of China+1 种基金the Research Fund of National University of Defense Technology under Grant No JC15-02-02the Fund from HPCL
文摘We propose a high-order conservative method for the nonlinear Sehodinger/Gross-Pitaevskii equation with time- varying coefficients in modeling Bose Einstein condensation （BEC）. This scheme combined with the sixth-order compact finite difference method and the fourth-order average vector field method, finely describes the condensate wave function and physical characteristics in some small potential wells. Numerical experiments are presented to demonstrate that our numerical scheme is efficient by the comparison with the Fourier pseudo-spectral method. Moreover, it preserves several conservation laws well and even exactly under some specific conditions.
基金Project(2012CB720401)supported by the National Basic Research Program of ChinaProject(2011BAC01B02)supported by the National Key Technology R&D Program of China
文摘For studying the carbon thermal reduction rules of titanium in hot metal and providing a theoretical basis for the blast furnace（BF） hearth protection, the distribution behavior of titanium between low-titanium slag system of CaO-SiO2-MgO-Al2O3-TiO2 and hot metal was studied using analytical reagents in a temperature range from 1350 °C to 1600 °C. Through high temperature melting, rapid quenching, chemical analysis and thermodynamic model calculating, the results showed that the increase of reaction temperature, which improved the titanium distribution L（Ti） and lowered the system activity coefficient γsys, leads to the rise of equilibrium constant. Combined with Wagner and congregated electron phase models, the data obtained in distribution experiments were used to fit out the Gibbs free energy formula of titanium carbothermic reduction. Finally, the relations between the contents of Si and Ti in hot metal and the titanium load to reach the minimum w（Ti） for the formation of Ti C were given.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52205481,51975305 and 52105457)Shandong Natural Science Foundation(Grant Nos.ZR2020ME158,ZR2023QE057,ZR2022QE028,ZR2021QE116,ZR2020KE027,and ZR2022QE159)+1 种基金Qingdao Science and Technology Planning Park Cultivation Plan(23-1-5-yqpy-17-qy)China Postdoctral Science Foundation(2021M701810).
文摘Grinding is a crucial process in machining workpieces because it plays a vital role in achieving the desired precision and surface quality.However,a significant technical challenge in grinding is the potential increase in temperature due to high specific energy,which can lead to surface thermal damage.Therefore,ensuring control over the surface integrity of workpieces during grinding becomes a critical concern.This necessitates the development of temperature field models that consider various parameters,such as workpiece materials,grinding wheels,grinding parameters,cooling methods,and media,to guide industrial production.This study thoroughly analyzes and summarizes grinding temperature field models.First,the theory of the grinding temperature field is investigated,classifying it into traditional models based on a continuous belt heat source and those based on a discrete heat source,depending on whether the heat source is uniform and continuous.Through this examination,a more accurate grinding temperature model that closely aligns with practical grinding conditions is derived.Subsequently,various grinding thermal models are summarized,including models for the heat source distribution,energy distribution proportional coefficient,and convective heat transfer coefficient.Through comprehensive research,the most widely recognized,utilized,and accurate model for each category is identified.The application of these grinding thermal models is reviewed,shedding light on the governing laws that dictate the influence of the heat source distribution,heat distribution,and convective heat transfer in the grinding arc zone on the grinding temperature field.Finally,considering the current issues in the field of grinding temperature,potential future research directions are proposed.The aim of this study is to provide theoretical guidance and technical support for predicting workpiece temperature and improving surface integrity.
基金This research was funded by the Science and Technology Department of Shaanxi Province,China,Grant Number 2019GY-036.
文摘The core technology in an intelligent video surveillance system is that detecting and recognizing abnormal behaviors timely and accurately.The key breakthrough point in recognizing abnormal behaviors is how to obtain the effective features of the picture,so as to solve the problem of recognizing them.In response to this difficulty,this paper introduces an adjustable jump link coefficients model based on the residual network.The effective coefficients for each layer of the network can be set after using this model to further improving the recognition accuracy of abnormal behavior.A convolution kernel of 1×1 size is added to reduce the number of parameters for the purpose of improving the speed of the model in this paper.In order to reduce the noise of the data edge,and at the same time,improve the accuracy of the data and speed up the training,a BN(Batch Normalization)layer is added before the activation function in this network.This paper trains this network model on the public ImageNet dataset,and then uses the transfer learning method to recognize these abnormal behaviors of human in the UTI behavior dataset processed by the YOLO_v3 target detection network.Under the same experimental conditions,compared with the original ResNet-50 model,the improved model in this paper has a 2.8%higher accuracy in recognition of abnormal behaviors on the public UTI dataset.
基金Supported by the National Natural Science Foundation of China(30400275)the Tackle Key Problems of Heilongjiang Province(the Hobbledehoy Science Fund of Heilongjiang Province)(QC04C28)
文摘The research of groundwater vulnerability is the basic work to protect the groundwater. For utilizing groundwater resource continuably, groundwater vulnerability evaluation is necessary. Useful reference to protect, exploit and utilize on groundwater resource are provided rationally. According to the real condition of Sanjiang Plain, the indexes system is established based on the traditional DRASTIC model. The new system includes the following seven indexes： Depth of Water, Net Recharge, Aquifer Media, Soil Media, Conductivity of the Aquifer, Land Utilizing Ratio and Populace Density. The related analysis appears that the system is rather reasonable. Because traditional methods, such as analytic hierarchy process and fuzzy mathematics theory, can＇t be avoided human interference in selection of weights, they could lead to an imprecise result. In order to evaluate the groundwater vulnerability reasonably, entropy weight coefficient method is applied for the first time, which provides a new way to groundwater vulnerability evaluation. The method is a model whose weights are insured by the calculation process, so the artificial disturb can be avoided. It has been used to evaluate the groundwater vulnerability in Sanjiang Plain. The satisfied result is acquired. Comparably, the same result is acquired by the other method named projection pursuit evaluation based on real-coded accelerating genetic algorithm. It shows that entropy weight coefficient method is applicable on groundwater vulnerability evaluation. The evaluation result can provide reference on the decision-making departments.
文摘Background： Measurements of tree heights and diameters are essential in forest assessment and modelling. Tree heights are used for estimating timber volume, site index and other important variables related to forest growth and yield, succession and carbon budget models. However, the diameter at breast height （dbh） can be more accurately obtained and at lower cost, than total tree height. Hence, generalized height-diameter （h-d） models that predict tree height from dbh, age and other covariates are needed. For a more flexible but biologically plausible estimation of covariate effects we use shape constrained generalized additive models as an extension of existing h-d model approaches. We use causal site parameters such as index of aridity to enhance the generality and causality of the models and to enable predictions under projected changeable climatic conditions. Methods： We develop unconstrained generalized additive models （GAM） and shape constrained generalized additive models （SCAM） for investigating the possible effects of tree-specific parameters such as tree age, relative diameter at breast height, and site-specific parameters such as index of aridity and sum of daily mean temperature during vegetation period, on the h-d relationship of forests in Lower Saxony, Germany. Results： Some of the derived effects, e.g. effects of age, index of aridity and sum of daily mean temperature have significantly non-linear pattern. The need for using SCAM results from the fact that some of the model effects show partially implausible patterns especially at the boundaries of data ranges. The derived model predicts monotonically increasing levels of tree height with increasing age and temperature sum and decreasing aridity and social rank of a tree within a stand, The definition of constraints leads only to marginal or minor decline in the model statistics like AIC An observed structured spatial trend in tree height is modelled via 2-dimensional surface fitting. Conclusions： We demonstrate that the SCAM approach allows optimal regression modelling flexibility similar to the standard GAM but with the additional possibility of defining specific constraints for the model effects. The longitudinal character of the model allows for tree height imputation for the current status of forests but also for future tree height prediction.
基金Supported by the National Natural Science Foundation of China(11101119)the Natural Science Foundation of Guangxi(2010GXNSFB013051)the Philosophy and Social Sciences Foundation of Guangxi(11FTJ002)
文摘In this paper,the estimation for a class of generalized varying coefficient models with error-prone covariates is considered.By combining basis function approximations with some auxiliary variables,an instrumental variable type estimation procedure is proposed.The asymptotic results of the estimator,such as the consistency and the weak convergence rate,are obtained.The proposed procedure can attenuate the effect of measurement errors and have proved workable for finite samples.
基金supported by the Yalongjiang River Joint Fund by the National Natural Science Foundation of China(NSFC)Ertan Hydropower Development Company,LTD(Nos.50579091 and 50539090)+1 种基金NSFC(No.10772190)Major State Basic Research Project of China(No.2002CB412708)
文摘Physical mechanisms and influencing factors on the effective stress coefficient for rock/soil-like porous materials are investigated, based on which equivalent connectivity index is proposed. The equivalent connectivity index, relying on the meso-scale structure of porous material and the property of liquid, denotes the connectivity of pores in Representative Element Area （REA）. If the conductivity of the porous material is anisotropic, the equivalent connectivity index is a second order tensor. Based on the basic theories of continuous mechanics and tensor analysis, relationship between area porosity and volumetric porosity of porous materials is deduced. Then a generalized expression, describing the relation between effective stress coefficient tensor and equivalent connectivity tensor of pores, is proposed, and the expression can be applied to isotropic media and also to anisotropic materials. Furthermore, evolution of porosity and equivalent connectivity index of the pore are studied in the strain space, and the method to determine the corresponding functions in expressions above is proposed using genetic algorithm and genetic programming. Two applications show that the results obtained by the method in this paper perfectly agree with the test data. This paper provides an important theoretical support to the coupled hydro-mechanical research.
基金Project(51078176) supported by the National Natural Science Foundation of ChinaProject(JK2010-58) supported by the Construction Science and Technology Research Project in Gansu Province,China
文摘A model of damage to fresh concrete in a corrosive sulphate environment was formulated to investigate how and why the strength of corroded concrete changes over time. First, a corroded concrete block was divided into three regions: an expanded and dense region; a crack-development region; and a noncorroded region. Second, based on the thickness of the surface corrosion layer and the rate of loss of compressive strength of the corroding region, a computational model of the concrete blocks' corrosion-resistance coefficient of compressive strength in a sulphate environment was generated. Third, experimental tests of the corrosion of concrete were conducted by immersing specimens in a corrosive medium for 270 d. A comparison of the experimental results with the computational formulae shows that the calculation results and test results are in good agreement. A parameter analysis reveals that the corrosion reaction plays a major role in the corrosion of fresh concrete containing ordinary Portland cement,but the diffusion of the corrosion medium plays a major role in the corrosion of concrete mixtures containing fly ash and sulphate-resistant cement. Fresh concrete with a high water-to-cement ratio shows high performance during the whole experiment process whereas fresh concrete with a low water-to-cement ratio shows poor performance during the late experiment period.
基金supported by the National Natural Science Foundation of China (11032006, 11072094, and 11121202)the PhD Program Foundation of the Ministry of Education of China (20100211110022)+1 种基金New Century Excellent Talents in University (NCET-10-0445)supported by the National Science Foundation through grant CMMI-1028530 to Brown University
文摘The molecular biomechanics of DNA ejection from bacteriophage is of interest to not only fundamental biological understandings but also practical applications such as the design of advanced site-specific and controllable drug delivery systems. In this paper, we analyze the viscous motion of a semiflexible polymer chain coming out of a strongly confined space as a model to investigate the effects of various structure confinements and frictional resistances encountered during the DNA ejection process. The theoretically predicted relations between the ejection speed, ejection time, ejection length, and other physical parameters, such as the phage type, total genome length and ionic state of external buffer solutions, show excellent agreement with in vitro experimental observations in the literature.
基金supported by a collaboration scheme from University of Science and Technology of China-City University of Hong Kong Joint Advanced Research Institute,City University of HongKong (7002472 (BC))the National Natural Science Founda-tion of China (10932011)
文摘A linear semi-continuum model with discrete atomic layers in the thickness direction was developed to investigate the bending behaviors of ultra-thin beams with nanoscale thickness.The theoretical results show that the deflection of an ultra-thin beam may be enhanced or reduced due to different relaxation coefficients.If the relaxation coefficient is greater/less than one,the deflection of micro/nano-scale structures is enhanced/reduced in comparison with macro-scale structures.So,two opposite types of size-dependent behaviors are observed and they are mainly caused by the relaxation coefficients.Comparisons with the classical continuum model,exact nonlocal stress model and finite element model （FEM） verify the validity of the present semi-continuum model.In particular,an explanation is proposed in the debate whether the bending stiffness of a micro/nano-scale beam should be greater or weaker as compared with the macro-scale structures.The characteristics of bending stiffness are proved to be associated with the relaxation coefficients.
基金Supported by the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT1066)National Natural Science Foundation of China(No.21306086)Applied Basic Research Programs of Science and Technology Commission Foundation of Jiangsu Province(No.BK20151452)
文摘L-phenylalanine, one of the nine essential amino acids for the human body, is extensively used as an ingredient in food, pharmaceutical and nutrition industries. A suitable equilibrium model is required for purification of L-phenylalanine based on ion-exchange chromatography. In this work, the equilibrium uptake of L-phenylalanine on a strong acid-cation exchanger SH11 was investigated experimentally and theoretically. A modified Donnan ion-exchange （DIX） model, which takes the activiW into account, was established to predict the uptake of L-phenylalanine at various solution pH values. The model parameters including selectivity and mean activity coefficient in the resin phase are presented. The modified DIX model is in good agreement with the experimental data. The optimum operating pH value of 2.0, with the highest t-phenylalanine uptake on the resin, is predicted by the model. This basic information combined with the general mass transfer model will lay the foundation for the prediction of dynamic behavior of fixed bed separation process.
基金financial support provided by Islamic Azad University of Mahshahr Branch,Iran
文摘In this paper,the polymer chain of rotator(PCOR) equation of state(EOS) was used together with an EOS/G^E mixing rule(MHV1) and the Wilson's equation as an excess-Gibbs-energy model in the proposed approach to extend the capability and improve the accuracy of the PCOR EOS for predicting the Henry's constant of solutions containing polymers.The results of the proposed method compared with two equation of state(van der Waals and GC-Flory) and three activity coefficient models(UNIFAC,UNIFAC-FV and Entropic-FV) indicated that the PCOR EOS/Wilson's equation provided more accurate results.The interaction parameters of Wilson's equation were fitted with Henry's constant experimental data and the property parameters of PCOR,a and b,were fitted with experimental volume data(Tait equation).As a result,the present work provided a simple and useful model for prediction of Henry's constant for polymer solutions.
基金Supported by the National Natural Science Foundation of China(Grant Nos.1110111911126332)+2 种基金the National Social Science Foundation of China(Grant No.11CTJ004)the Natural Science Foundation of Guangxi Province(Grant No.2010GXNSFB013051)the Philosophy and Social Sciences Foundation of Guangxi Province(Grant No.11FTJ002)
文摘In this paper, we consider the variable selection for the parametric components of varying coefficient partially linear models with censored data. By constructing a penalized auxiliary vector ingeniously, we propose an empirical likelihood based variable selection procedure, and show that it is consistent and satisfies the sparsity. The simulation studies show that the proposed variable selection method is workable.
基金supported by National Natural Science Foundation of China (61703410,61873175,62073336,61873273,61773386,61922089)。
文摘Remaining useful life(RUL) prediction is one of the most crucial elements in prognostics and health management(PHM). Aiming at the imperfect prior information, this paper proposes an RUL prediction method based on a nonlinear random coefficient regression(RCR) model with fusing failure time data.Firstly, some interesting natures of parameters estimation based on the nonlinear RCR model are given. Based on these natures,the failure time data can be fused as the prior information reasonably. Specifically, the fixed parameters are calculated by the field degradation data of the evaluated equipment and the prior information of random coefficient is estimated with fusing the failure time data of congeneric equipment. Then, the prior information of the random coefficient is updated online under the Bayesian framework, the probability density function(PDF) of the RUL with considering the limitation of the failure threshold is performed. Finally, two case studies are used for experimental verification. Compared with the traditional Bayesian method, the proposed method can effectively reduce the influence of imperfect prior information and improve the accuracy of RUL prediction.
基金Supported by the Direction of Research of the University of La Serena-Chile (220-2-05 and 220-2-21)the National Council for Scientific and Technological Research,CONICYT (FONDECYT 3020020)
文摘In this study,three semipredictive activity coefficient models:Wilson,non-random-two liquid model(NRTL),and universal quasi-chemical model(UNIQUAC),have been used for modeling vapor-liquid equilibrium properties of ternary mixtures that include substances found in alcoholic distillation processes of wine and musts.In particular,vapor-liquid equilibrium in ternary mixtures containing water + ethanol + congener has been modeled using parameters obtained from binary and ternary mixture data.The congeners are substances that although present in very low concentrations,of the order of part per million,are important enological parameters.The results given by these different models have been compared with literature data and conclusions about the accuracy of the models studied are drawn,recommending the best models for correlating and predicting phase equilibrium properties of this type of mixtures.
文摘In this paper, an efficient shrinkage estimation procedure for the partially linear varying coefficient model (PLVC) with random effect is considered. By selecting the significant variable and estimating the nonzero coefficient, the model structure specification is accomplished by introducing a novel penalized estimating equation. Under some mild conditions, the asymptotic properties for the proposed model selection and estimation results, such as the sparsity and oracle property, are established. Some numerical simulation studies and a real data analysis are presented to examine the finite sample performance of the procedure.
基金Supported by the National Natural Science Foundation of China(61374166,6153303)the Doctoral Fund of Ministry of Education of China(20120010110010)the Fundamental Research Funds for the Central Universities(YS1404,JD1413,ZY1502)
文摘Interpretative structural model(ISM) can transform a multivariate problem into several sub-variable problems to analyze a complex industrial structure in a more efficient way by building a multi-level hierarchical structure model. To build an ISM of a production system, the partial correlation coefficient method is proposed to obtain the adjacency matrix, which can be transformed to ISM. According to estimation of correlation coefficient, the result can give actual variable correlations and eliminate effects of intermediate variables. Furthermore, this paper proposes an effective approach using ISM to analyze the main factors and basic mechanisms that affect the energy consumption in an ethylene production system. The case study shows that the proposed energy consumption analysis method is valid and efficient in improvement of energy efficiency in ethylene production.
基金supported by the Innovation Project of Guangxi Graduate Education(YCSW2021073).
文摘The study of spatial econometrics has developed rapidly and has found wide applications in many different scientific fields,such as demography,epidemiology,regional economics,and psychology.With the deepening of research,some scholars find that there are some model specifications in spatial econometrics,such as spatial autoregressive(SAR)model and matrix exponential spatial specification(MESS),which cannot be nested within each other.Compared with the common SAR models,the MESS models have computational advantages because it eliminates the need for logarithmic determinant calculation in maximum likelihood estimation and Bayesian estimation.Meanwhile,MESS models have theoretical advantages.However,the theoretical research and application of MESS models have not been promoted vigorously.Therefore,the study of MESS model theory has practical significance.This paper studies the quasi maximum likelihood estimation for matrix exponential spatial specification(MESS)varying coefficient panel data models with fixed effects.It is shown that the estimators of model parameters and function coefficients satisfy the consistency and asymptotic normality to make a further supplement for the theoretical study of MESS model.
