Predicting rock blasting outcomes in mining has been crucial since its inception.Blasting remains the most energy-and cost-efficient method for rock breaking and is often the only practical option.However,the mechanis...Predicting rock blasting outcomes in mining has been crucial since its inception.Blasting remains the most energy-and cost-efficient method for rock breaking and is often the only practical option.However,the mechanism is complex,influenced by various rock properties,explosives,and blast design parameters,making their effects difficult to quantify.Traditional stress-based models struggle with many parameters,such as stress and Poisson's ratio,which are challenging to measure in the field.Empirical models,though simpler,often oversimplify blast conditions.Both types of models are limited to simulating a few blastholes and cannot handle full-scale blasts involving hundreds of blastholes.However,modeling full-scale blasts with all blast design parameters is most required for modern mining applications.This paper presents a novel strain-based modeling approach for blasting and geomechanical applications,utilizing measurable variables such as particle velocity,strain,and displacement.By bypassing complex constitutive relations,strain-based models capture critical blasting trends and simulate full-scale blasts with full-blast design parameters with minimal calibration.The framework encompasses field strain measurements,model construction based on measurable variables,and laboratoryderived strain-failure criteria,each offering potential for future enhancement.Additionally,a standardized field test for site characterization is recommended.The approach is demonstrated through the Multiple Blasthole Fragmentation model,which simulates rock fragmentation and fragment strain during blasting,highlighting the practicality and effectiveness of strain-based modeling for multiple blasthole blasts.Moreover,this approach extends beyond blasting,with potential applications in highwall stability monitoring and other geomechanical applications.Strain-based modeling provides a simplified yet effective solution,avoiding the complexities of rock constitutive relations and field stress measurements while enabling full-blast design simulations for large-scale field blasts.展开更多
The quality of contour blasting depends on many initial blasting parameters.The parameters including blasthole diameter,rock Protodyakonov coefficient,tunnel area and distance between cracks on the tunnel face are mor...The quality of contour blasting depends on many initial blasting parameters.The parameters including blasthole diameter,rock Protodyakonov coefficient,tunnel area and distance between cracks on the tunnel face are more important.In this study,an algorithm linking between Delphi programming language and AutoCAD was created to develop a tunnel blasting model.Using this model,tunnel contour blasting passport in AutoCAD can be obtained automatically.The effects of rock Protodyakonov coefficient and cracks’distance on blastholes number and specific charge with the variation of blasthole diameter and the semi-circular tunnel face area were investigated to yield a set of equations with the highest correlations.The results show that specific charge increases as rock Protodyakonov coefficient,cracks’distance and drillhole diameter increase,but decreases when tunnel face area increases.In addition,the number of drillholes increases linearly as tunnel face area increases but decreases when drillhole diameter increases.展开更多
A multi-fluid blast furnace model was simply introduced and was used to simulate several innovative ironmaking operations. The simulation results show that injecting hydrogen bearing materials, especially injecting na...A multi-fluid blast furnace model was simply introduced and was used to simulate several innovative ironmaking operations. The simulation results show that injecting hydrogen bearing materials, especially injecting natural gas and plastics, the hydrogen reduction is enhanced, and the furnace performance is improved simultaneously. Total heat input shows obvious decrease due to the decrease of heat consumption in direct reduction, solution loss and silicon transfer reactions. If carbon composite agglomerates are charged into the furnace, the temperature of thermal reserve zone will obviously decrease, and the reduction of iron-bearing burden materials will be retarded. However, the efficiency of blast furnace is improved just due to the decrease in heat requirements for solution loss, sinter reduction, and silicon transfer reactions, and less heat loss through top gas and furnace wall. Finally, the model is used to investigate the performance of blast furnace under the condition of top gas recycling together with plastics injection, cold oxygen blasting and carbon composite agglomerate charging. The lower furnace temperature, extremely accelerated reduction rate, drastically decreased CO2 emission and remarkably enhanced heat efficiency were obtained by using the innovative operations, and the blast furnace operation with superhigh efficiency can be realized.展开更多
Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field exper...Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.展开更多
One of the most important factors influencing on a tunnel blast efficiency is the proper design of blasting pattern. Among blasting parameters, blasthole diameter and tunnel face area are more significant so that any ...One of the most important factors influencing on a tunnel blast efficiency is the proper design of blasting pattern. Among blasting parameters, blasthole diameter and tunnel face area are more significant so that any change in these parameters could finally affect on specific charge and specific drilling. There are mainly two groups of methods for tunnel blast design categorized based on the parallel cuts and angular cuts. In this research, a software for tunnel blast design was developed to analyze the effect and sensitiveness of blasthole diameter and the tunnel face area on blasting results in different blast design models. Using the software, it is quickly possible to determine specific charge, specific drilling and number of blastholes for each blast design model. The relations between both of blasthole diameters and the tunnel face area with the above parameters in different blast design models were then investigated to yield a set of equations with the highest correlations to compare the methods. The results showed that angular method requires more blasthole numbers than parallel method in similar condition(blasthole diameter and tunnel face area). Moreover, the specific charge values yielded by the two methods are approximately the same and very close together.展开更多
The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement...The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement system. The directed crack mechanism and its mechanical model have been analysed and expounded. Through the 43 production experiments using slotted cartridges and the double triangle center cut-holes for directed crack blasting in underground rock drift, the results of which the rates of half-hole marks and efficiency of borehole,and the nonsmooth grades of the cut contours are 96%, 98% and 10cm respectively have been achieved.展开更多
In order to increase the safety of working environment and decrease the unwanted costs related to overbreak in tunnel excavation projects, it is necessary to minimize overbreak percentage. Thus, based on regression an...In order to increase the safety of working environment and decrease the unwanted costs related to overbreak in tunnel excavation projects, it is necessary to minimize overbreak percentage. Thus, based on regression analysis and fuzzy inference system, this paper tries to develop predictive models to estimate overbreak caused by blasting at the Alborz Tunnel. To develop the models, 202 datasets were utilized, out of which 182 were used for constructing the models. To validate and compare the obtained results,determination coefficient(R2) and root mean square error(RMSE) indexes were chosen. For the fuzzy model, R2 and RMSE are equal to 0.96 and 0.55 respectively, whereas for regression model, they are 0.41 and 1.75 respectively, proving that the fuzzy predictor performs, significantly, better than the statistical method. Using the developed fuzzy model, the percentage of overbreak was minimized in the Alborz Tunnel.展开更多
Safety plays an important role in determining the applicability of energetic compounds,and the bond dissociation enthalpy(BDE)of the“trigger bond”X-NO_(2) provides useful information to evaluate various safety prope...Safety plays an important role in determining the applicability of energetic compounds,and the bond dissociation enthalpy(BDE)of the“trigger bond”X-NO_(2) provides useful information to evaluate various safety properties.Accurate and rapid calculation of the BDE of X-NO_(2) is of great significance to perform the high-throughput design of energetic compounds,which becomes an increasingly popular means of materials design.We conduct a benchmark BDE calculation for 44 X-NO_(2) samples extracted from the iBond database,with the accuracies of 55 quantum chemistry calculation levels evaluated by the experimentally measured values.Only four levels have the global mean-absolute deviation(MAD)less than 10 kJ/mol,but no calculation level can achieve that all the local MADs of each category less than 10 kJ/mol.We propose a simple correction strategy for the original calculation deviations,and apply it to 30 calculation levels screened out through a series of accuracy assessments and obtain the corrected MAD<6 kJ/mol in some cases.We define a normalized time-cost(NTC)to evaluate the time-cost of each calculation level,and confirm that PBE0-D3/6-31G^(**)(MAD=6.4 kJ/mol,NTC?0.8)works the best for most cases,followed by M062X/6-31g^(**),M062X/6-311g^(**)andɷB97XD/6-311g^(**),based on an insight into the accuracy-cost trade.The present work provides an accurate and fast solution for calculating XNO_(2) BDE via quantum chemical methods,and is expected to be beneficial to enhance the safety prediction efficiency of energetic compounds.展开更多
A model recognition method for the on-line optimal control of the parameters ofthree-cone blast drills is developed. It takes a few of on-line measurements and has a rapidoptimization speed. The mathematic model for o...A model recognition method for the on-line optimal control of the parameters ofthree-cone blast drills is developed. It takes a few of on-line measurements and has a rapidoptimization speed. The mathematic model for on-line optimal control of the parameters and thedetermination of the parameters in the model are also presented.展开更多
Explosive blast injury has become the most prevalent injury in recent military conflicts and terrorist attacks. The magnitude of this kind of polytrauma is complex due to the basic physics of blast and the surrounding...Explosive blast injury has become the most prevalent injury in recent military conflicts and terrorist attacks. The magnitude of this kind of polytrauma is complex due to the basic physics of blast and the surrounding environments. Therefore, development of stable, reproducible and controllable animal model using an ideal blast simulation device is the key of blast injury research. The present review addresses the modeling of blast injury and applications of shock tubes.展开更多
文摘Predicting rock blasting outcomes in mining has been crucial since its inception.Blasting remains the most energy-and cost-efficient method for rock breaking and is often the only practical option.However,the mechanism is complex,influenced by various rock properties,explosives,and blast design parameters,making their effects difficult to quantify.Traditional stress-based models struggle with many parameters,such as stress and Poisson's ratio,which are challenging to measure in the field.Empirical models,though simpler,often oversimplify blast conditions.Both types of models are limited to simulating a few blastholes and cannot handle full-scale blasts involving hundreds of blastholes.However,modeling full-scale blasts with all blast design parameters is most required for modern mining applications.This paper presents a novel strain-based modeling approach for blasting and geomechanical applications,utilizing measurable variables such as particle velocity,strain,and displacement.By bypassing complex constitutive relations,strain-based models capture critical blasting trends and simulate full-scale blasts with full-blast design parameters with minimal calibration.The framework encompasses field strain measurements,model construction based on measurable variables,and laboratoryderived strain-failure criteria,each offering potential for future enhancement.Additionally,a standardized field test for site characterization is recommended.The approach is demonstrated through the Multiple Blasthole Fragmentation model,which simulates rock fragmentation and fragment strain during blasting,highlighting the practicality and effectiveness of strain-based modeling for multiple blasthole blasts.Moreover,this approach extends beyond blasting,with potential applications in highwall stability monitoring and other geomechanical applications.Strain-based modeling provides a simplified yet effective solution,avoiding the complexities of rock constitutive relations and field stress measurements while enabling full-blast design simulations for large-scale field blasts.
文摘The quality of contour blasting depends on many initial blasting parameters.The parameters including blasthole diameter,rock Protodyakonov coefficient,tunnel area and distance between cracks on the tunnel face are more important.In this study,an algorithm linking between Delphi programming language and AutoCAD was created to develop a tunnel blasting model.Using this model,tunnel contour blasting passport in AutoCAD can be obtained automatically.The effects of rock Protodyakonov coefficient and cracks’distance on blastholes number and specific charge with the variation of blasthole diameter and the semi-circular tunnel face area were investigated to yield a set of equations with the highest correlations.The results show that specific charge increases as rock Protodyakonov coefficient,cracks’distance and drillhole diameter increase,but decreases when tunnel face area increases.In addition,the number of drillholes increases linearly as tunnel face area increases but decreases when drillhole diameter increases.
文摘A multi-fluid blast furnace model was simply introduced and was used to simulate several innovative ironmaking operations. The simulation results show that injecting hydrogen bearing materials, especially injecting natural gas and plastics, the hydrogen reduction is enhanced, and the furnace performance is improved simultaneously. Total heat input shows obvious decrease due to the decrease of heat consumption in direct reduction, solution loss and silicon transfer reactions. If carbon composite agglomerates are charged into the furnace, the temperature of thermal reserve zone will obviously decrease, and the reduction of iron-bearing burden materials will be retarded. However, the efficiency of blast furnace is improved just due to the decrease in heat requirements for solution loss, sinter reduction, and silicon transfer reactions, and less heat loss through top gas and furnace wall. Finally, the model is used to investigate the performance of blast furnace under the condition of top gas recycling together with plastics injection, cold oxygen blasting and carbon composite agglomerate charging. The lower furnace temperature, extremely accelerated reduction rate, drastically decreased CO2 emission and remarkably enhanced heat efficiency were obtained by using the innovative operations, and the blast furnace operation with superhigh efficiency can be realized.
基金supported by the National Natural Science Foundation of China[No.51978166]。
文摘Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.
文摘One of the most important factors influencing on a tunnel blast efficiency is the proper design of blasting pattern. Among blasting parameters, blasthole diameter and tunnel face area are more significant so that any change in these parameters could finally affect on specific charge and specific drilling. There are mainly two groups of methods for tunnel blast design categorized based on the parallel cuts and angular cuts. In this research, a software for tunnel blast design was developed to analyze the effect and sensitiveness of blasthole diameter and the tunnel face area on blasting results in different blast design models. Using the software, it is quickly possible to determine specific charge, specific drilling and number of blastholes for each blast design model. The relations between both of blasthole diameters and the tunnel face area with the above parameters in different blast design models were then investigated to yield a set of equations with the highest correlations to compare the methods. The results showed that angular method requires more blasthole numbers than parallel method in similar condition(blasthole diameter and tunnel face area). Moreover, the specific charge values yielded by the two methods are approximately the same and very close together.
文摘The dynamic stress-fields and their distribution characteristics around boreholes in the directed crack blasting were measured with the dynamic photo-elastic laser holography apparatus and the ultradymamic measurement system. The directed crack mechanism and its mechanical model have been analysed and expounded. Through the 43 production experiments using slotted cartridges and the double triangle center cut-holes for directed crack blasting in underground rock drift, the results of which the rates of half-hole marks and efficiency of borehole,and the nonsmooth grades of the cut contours are 96%, 98% and 10cm respectively have been achieved.
文摘In order to increase the safety of working environment and decrease the unwanted costs related to overbreak in tunnel excavation projects, it is necessary to minimize overbreak percentage. Thus, based on regression analysis and fuzzy inference system, this paper tries to develop predictive models to estimate overbreak caused by blasting at the Alborz Tunnel. To develop the models, 202 datasets were utilized, out of which 182 were used for constructing the models. To validate and compare the obtained results,determination coefficient(R2) and root mean square error(RMSE) indexes were chosen. For the fuzzy model, R2 and RMSE are equal to 0.96 and 0.55 respectively, whereas for regression model, they are 0.41 and 1.75 respectively, proving that the fuzzy predictor performs, significantly, better than the statistical method. Using the developed fuzzy model, the percentage of overbreak was minimized in the Alborz Tunnel.
基金the support of the Science Challenge Project(TZ-2018004)。
文摘Safety plays an important role in determining the applicability of energetic compounds,and the bond dissociation enthalpy(BDE)of the“trigger bond”X-NO_(2) provides useful information to evaluate various safety properties.Accurate and rapid calculation of the BDE of X-NO_(2) is of great significance to perform the high-throughput design of energetic compounds,which becomes an increasingly popular means of materials design.We conduct a benchmark BDE calculation for 44 X-NO_(2) samples extracted from the iBond database,with the accuracies of 55 quantum chemistry calculation levels evaluated by the experimentally measured values.Only four levels have the global mean-absolute deviation(MAD)less than 10 kJ/mol,but no calculation level can achieve that all the local MADs of each category less than 10 kJ/mol.We propose a simple correction strategy for the original calculation deviations,and apply it to 30 calculation levels screened out through a series of accuracy assessments and obtain the corrected MAD<6 kJ/mol in some cases.We define a normalized time-cost(NTC)to evaluate the time-cost of each calculation level,and confirm that PBE0-D3/6-31G^(**)(MAD=6.4 kJ/mol,NTC?0.8)works the best for most cases,followed by M062X/6-31g^(**),M062X/6-311g^(**)andɷB97XD/6-311g^(**),based on an insight into the accuracy-cost trade.The present work provides an accurate and fast solution for calculating XNO_(2) BDE via quantum chemical methods,and is expected to be beneficial to enhance the safety prediction efficiency of energetic compounds.
文摘A model recognition method for the on-line optimal control of the parameters ofthree-cone blast drills is developed. It takes a few of on-line measurements and has a rapidoptimization speed. The mathematic model for on-line optimal control of the parameters and thedetermination of the parameters in the model are also presented.
基金We gratefully appreciate Academician Wang ZG for critically reading and editing the manuscript. This work was supported by the grants from National Natural Science Foundation of China （No. 81201461 ）, Key Project of Medicine and Health of PLA （No. 08G098） and the Natural Science Foundation of Chongqing, China （No. CSTC2012jjA10107）.
文摘Explosive blast injury has become the most prevalent injury in recent military conflicts and terrorist attacks. The magnitude of this kind of polytrauma is complex due to the basic physics of blast and the surrounding environments. Therefore, development of stable, reproducible and controllable animal model using an ideal blast simulation device is the key of blast injury research. The present review addresses the modeling of blast injury and applications of shock tubes.
