OBJECTIVE:To investigate the mechanism of Dan Ze mixture(丹泽合剂,DZM)in the treatment of lipotoxic cardiomyopathy.METHODS:Ultra-performance liquid chromatography tandem mass spectrometry was employed to characterize ...OBJECTIVE:To investigate the mechanism of Dan Ze mixture(丹泽合剂,DZM)in the treatment of lipotoxic cardiomyopathy.METHODS:Ultra-performance liquid chromatography tandem mass spectrometry was employed to characterize the serum migration constituents of DZM.A lipotoxic cardiomyopathy rat model was established through high-fat diet and intervened by different doses of DZM.The cardiac function was assessed using echocardiography,and hematoxylin and eosin,oil red O,and Masson staining were conducted to evaluate morphological changes,lipid accumulation,and fibrosis in myocardial tissue.Serum myocardial enzyme activity,lipid levels,and lipid content of myocardial tissue were measured,while fluorescent staining and colorimetry were used to assess oxidation levels in myocardial tissue.Mitochondrial membrane potential was detected by 5,5',6,6'-Tetrachloro-1,1',3,3'-tetraethyl-imidacarbocyanineiodide(JC-1).Transmission electron microscopy was employed to observe ultrastructure and mitochondrial structure changes in myocardial tissue.Fluorescence double staining and colocalization were utilized to observe the binding of autophagosomes and mitochondria,while immunohistochemical staining was used to detect the expression of mitophagy-related proteins.Terminal deoxynucleoitidyl transferase mediated nick end labeling staining was employed for the identification of apoptosis in myocardial tissue,while quantitative real-time reverse transcriptase polymerase chain reaction(q RT-PCR)and Western blot were utilized for the detection of apoptosis,B-cell lymphoma-2 adenovirus E1B 19 k Da-interacting protein 3(BNIP3)/mitophagy signaling pathway-related genes and proteins.In palmitic acid-induced Rat H9C2 cardiomyocytes(H9c2)cells,various cellular parameters including cell viability,lactate dehydrogenase release,apoptosis rate,oxidative stress level,mitochondrial structure and function,and mitophagy level were assessed after the treatment of DZM drug-containing serum for a duration of 24 h.The cellular expressions of BNIP3/mitophagy signaling pathway relevant genes and proteins were further evaluated using q RT-PCR and Western blot techniques.RESULTS:A total of 295 prototypes(e.g.,phenolic acids,quinones,terpenoids)were identified in serum of rats after oral administration of DZM.In vivo,DZM therapy has been shown to effectively enhance cardiac function,mitigate high-fat diet-induced myocardial structural damage and lipid accumulation.Furthermore,DZM has demonstrated the ability to reduce lipid levels,attenuate cell apoptosis,combat oxidative stress,enhance mitochondrial structure and function,and activate the BNIP3/mitophagy signaling pathway.Furthermore,the silencing of BNIP3 has been shown to exacerbate palmitic acid-induced damages in H9c2 cells,while inhibiting the BNIP3/mitophagy signaling pathway can mitigate the inhibitory effects of DZM on palmitic acidinduced apoptosis,lipid deposition and oxidative stress.CONCLUSION:This study presents preliminary evidence for the therapeutic efficacy of DZM on lipotoxic cardiomyopathy through the activating BNIP3/mitophagy signaling pathway.展开更多
The present paper renders a modeling and a 2D numerical simulation for the removal of CO_2from CO_2/CH_4gaseous stream utilizing sodium hydroxide(NaOH),monoethanolamine(MEA)and triethanolamine(TEA)liquid absorbents in...The present paper renders a modeling and a 2D numerical simulation for the removal of CO_2from CO_2/CH_4gaseous stream utilizing sodium hydroxide(NaOH),monoethanolamine(MEA)and triethanolamine(TEA)liquid absorbents inside the hollow fiber membrane contactor.Counter-current arrangement of absorbing agents and CO_2/CH_4gaseous mixture flows are implemented in the modeling and numerical simulation.Non-wetting and partial wetting modes of operation are considered where in the partial wetting mode,CO_2/CH_4gaseous mixture and liquid absorbents fill the membrane pores.The deteriorated removal of CO_2in the partial wetting mode of operation is mainly due to the mass transfer resistance imposed by the liquid in the pores of membrane.The validation of numerical simulation is done based on the comparison of simulation results of CO_2removal using Na OH and experimental data under non-wetting mode of operation.The comparison illustrates a desirable agreement with an average deviation of less than 5%.According to the results,MEA provides higher efficiency for CO_2removal in comparison with the other liquid absorbents.The order for CO_2removal performance is MEAN Na OHN TEA.The influence of non-wetting and partial wetting modes of operation on CO_2removal are evaluated in this article as one of the novelties.Besides,the percentage of CO_2sequestration as a function of gas velocity for various percentages of membrane pores wetting ranging from 0(non-wetting mode of operation)to 100%(complete wetting mode of operation)is studied in this research paper,which can be proposed as the other novelty.The results indicate that increase in some operational parameters such as module length,membrane porosity and absorbents concentration encourage the removal percentage of CO_2from CO_2/CH_4gaseous mixture while increasing in membrane tortuosity,gas velocity and initial CO_2concentration has unfavorable influence on the separation efficiency of CO_2.展开更多
The protective behavior for a molten AZ91D alloy in an open melting furnace was investigated under a protective gas mixture containing 3% SO2 and 97% CO2, and the protection mechanism was discussed. Experimental resul...The protective behavior for a molten AZ91D alloy in an open melting furnace was investigated under a protective gas mixture containing 3% SO2 and 97% CO2, and the protection mechanism was discussed. Experimental results show that the gas mixture provides effective protection for AZ91D melt in the temperature range from 680 ℃ to 730 ℃. The microstructure, chemical composition and phase composition of the surface film formed on the molten AZ91D alloy were analyzed using scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）. The SEM results demonstrate that the surface films with an average thickness between 0.5 pm and 2 pm are dense and coherent in the protected temperature range. The EDS results reveal that the surface film mainly contains elements S, C, O, AI and Mg. The XRD results show that the surface film consists of MgO, MgS and a small amount of C phase.展开更多
The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential,...The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential, the transport properties of CO2-N2 mixture are presented in a temperature range front 273.15 K to 3273.15 K at low density by employing the Chapman-Enskog scheme and the Wang Chang-Uhlenbeck de Boer theory, consisting of a viscosity coefficient, a thermal conductivity coefficient, a binary diffusion coefficient, and a thermal diffusion factor. The accuracy of the predicted results is estimated to be 2% for viscosity, 5% for thermal conductivity, and 10% for binary diffusion coefficient.展开更多
Low critical temperature limits the application of CO_2 trans-critical power cycle.The binary mixture of R290/CO_2has higher critical temperature.Using mixture fluid may solve the problem that subcritical CO_2 is hard...Low critical temperature limits the application of CO_2 trans-critical power cycle.The binary mixture of R290/CO_2has higher critical temperature.Using mixture fluid may solve the problem that subcritical CO_2 is hardly condensed by conventional cooling water.In this article,theoretical analysis is executed to study the performance of the zeotropic mixture for trans-critical power cycle using low-grade liquid heat source with temperature of200℃.The results indicated that the problem that CO_2 can't be condensed in power cycle by conventional cooling water can be solved by mixing R290 to CO_2.Variation trend of outlet temperature of thermal oil in supercritical heater with heating pressure is determined by the composition of the mixture fluid.Gliding temperature causes the maximum outlet temperature of cooling water with the increase of mass fraction of R290.There are the maximum values for cycle thermal efficiency and net power output with the increase of supercritical heating pressure.展开更多
Seven types of activated carbon were used to investigate the effect of their structure on separation of CO2 from（H2 ＋ CO2） gas mixture by the adsorption method at ambient temperature and higher pressures. The resul...Seven types of activated carbon were used to investigate the effect of their structure on separation of CO2 from（H2 ＋ CO2） gas mixture by the adsorption method at ambient temperature and higher pressures. The results showed that the limiting factors for separation of CO2 from 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture and from 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture were different at 20 °C and about 2 MPa. The best separation result could be achieved when the pore diameter of the activated carbon ranged from 0.77 to 1.20 nm, and the median particle size was about2.07 lm for 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture and 1.41 lm for 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture. The effect of specific area and pore diameter of activated carbon on separation CO2 from 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture was more significant than that from 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture. CO2 in the gas phase can be decreased from 46.4 mol% to 2.3 mol%–4.3 mol% with a two-stage separation process.展开更多
We calculated the uniform dielectric breakdown field strength of residual 30% CF3I/CO2 gas mixtures during the arc extinction process over the temperature range 300-3500 K at 0.1 MPa. The limiting reduced field streng...We calculated the uniform dielectric breakdown field strength of residual 30% CF3I/CO2 gas mixtures during the arc extinction process over the temperature range 300-3500 K at 0.1 MPa. The limiting reduced field strengths are decided by a balance of electron generation and loss based on chemical reactions estimated by the electron energy distribution function （EEDF）, which employs the Boltzmann equation method with two-term expanding approximation in the steady-state Townsend （SST） condition. During the insulation recovery phase, the hot CF3I/CO2 gas mixtures have maximum dielectric strength at a temperature of about 1500 K. At room temperature 300 K, the electric strength after arc extinction （90.3 Td, 1 Td=10-21 V.m2） is only 38% of the original value before arc （234.9 Td）. The adverse insulation recovery ability of CF3I/CO2 gas mixtures in arc extinction hinders its application in electric circuit breakers and other switchgears as an arc quenching and insulating medium.展开更多
The development of carbon dioxide(CO_2) sorbents that can operate at elevated temperatures is significant for the advancement of pre-combustion capture technologies.Recently, promoter-based systems composed of alkali/...The development of carbon dioxide(CO_2) sorbents that can operate at elevated temperatures is significant for the advancement of pre-combustion capture technologies.Recently, promoter-based systems composed of alkali/alkaline earth metal nitrates and/or carbonates have been considered as next-generation solid sorbents due to their improved CO_2 uptake and kinetics. However, obtaining stable MgO sorbents against temperature swing regeneration still remained challenging. Herein, we report MgO-TiO_2 solid sorbents promoted by eutectic mixture(KNO_3 and LiNO_3) for elevated temperature CO_2 sorption. The developed sorbents show improved CO_2 sorption capacity, which may be attributed to the alternative CO_2 sorption pathway provided by the ionization of highly dispersed MgO in the eutectic mixture. The MgO-TiO_2 framework was also shown to assist in retaining the MgO configuration by constraining its interaction with CO_2. Furthermore, it is demonstrated that constructing composite structures is essential to improve the CO_2 sorption characteristics,mainly recyclability, at elevated temperatures. The developed promoter integrated sorbents showed exceptionally high CO_2 sorption capacity of > 30 wt.% at an elevated temperature(300°C) with pronounced stability under temperature swing operation.展开更多
We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,ind...We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.展开更多
MnO and CeO2 powders were mechanically mixed by a spatula and by milling to obtain loose-contact and tight-contact mixed oxides,respectively.The monoxides and their physical mixtures were characterized by X-ray diffra...MnO and CeO2 powders were mechanically mixed by a spatula and by milling to obtain loose-contact and tight-contact mixed oxides,respectively.The monoxides and their physical mixtures were characterized by X-ray diffraction（XRD）,Brunauer-Emmett-Teller（BET）,X-ray photoelectron spectroscopy（XPS）,Raman,O2 temperature-programmed desorption（O2-TPD）,H2 temperature-programmed reduction（H2-TPR） and NO temperature-programmed oxidation（NO-TPO）.The MnOx-CeO2 solid solutions did not form without any calcination process.The oxidation state of manganese tended to increase while the ionic valence of cerium decreased in the mixed oxides,accompanied with the formation of oxygen vacancies.This long-ranged electronic interaction occured more significantly in the tight-contact mixture of MnO and CeO2.The formation of more Mn4＋and oxygen vacancies promoted the catalytic oxidation of NO in an oxygen-rich atmosphere.展开更多
The viscosities for the selected CaO-MgO-SiO2 and CaO-MgO Al2 O3-SiO2 slags were measured by rota- ting cylinder method in a wide temperature range from 1608 K to 1 823 K. The effects of temperature, slag basicity and...The viscosities for the selected CaO-MgO-SiO2 and CaO-MgO Al2 O3-SiO2 slags were measured by rota- ting cylinder method in a wide temperature range from 1608 K to 1 823 K. The effects of temperature, slag basicity and Al2 O3 content were studied. The results indicated that the viscosity decreased with increasing the slag basicity at the same temperature. And the viscosities of the slag initially increased linearly with increasing Al2 O3 content in the slags and then decreased as the Al2 O3 content in the slags continued to increase. Al2 O3 addition has a more signifi- cant effect on the viscosity than slag basicity in the selected slags. Based on the experimental data and the fraction of solid phases calculated by the thermodynamic software, the effect of solid phases on slag viscosity was evaluated. The results indicated that the relationship between the relative viscosity and the volume fraction of solid phases esti- mated from the slag composition can be reasonable by allowing the inverse maximum fraction of solid particles to vary.展开更多
To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(...To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(150–250μm)was investigated in a semibatch vessel at variable temperatures(273,275,and 277 K)and pressures(5.8–7.8 MPa).During the gas hydrate reaction process,the changes in the gaseous phase composition were determined by gas chromatography.The results indicate that the gas hydrate formation process of the binary CO2/N2 gas mixture in fine sediments can be reduced to two stages.Firstly,the dissolved gas containing a large amount of CO2 formed gas hydrates,and then gaseous N2 participated in the gas hydrate formation.In the second stage,all the dissolved gas was consumed.Thus,both gaseous CO2 and N2 diffused into sediment.The first stage in different experiments lasted for 5–15 h,and>60%of the gas was consumed in this period.The gas consumption rate was greater in the first stage than in the second stage.After the completion of gas hydrate formation,the CO2 content in the gas hydrate was more than that in the gas phase.This indicates that CO2 formed hydrate easily than N2 in the binary mixture.Higher operating pressures and lower temperatures increased the gas consumption rate of the binary gas mixture in gas hydrate formation.展开更多
CF3I gas mixtures have attracted considerable attention as potential environmentally-friendly alternatives to SF6 gas,owing to their excellent insulating performance.This paper attempts to study the CF3I ternary gas m...CF3I gas mixtures have attracted considerable attention as potential environmentally-friendly alternatives to SF6 gas,owing to their excellent insulating performance.This paper attempts to study the CF3I ternary gas mixtures with c-C4F8 and buffer gases N2 and CO2 by considering dielectric strength from electron transport parameters based on the Boltzmann method and synergistic effect analysis,compared with SF6 gas mixtures.The results confirm that the critical electric field strength of CF3I/c-C4F8/70%CO2 is greater than that of 30%SF6/70%CO2 when the CF3I content is greater than 17%.Moreover,a higher content of c-C4F8 decreases the sensitivity of gas mixtures to an electric field,and this phenomenon is more obvious in CF3I/c-C4F8/CO2 gas mixtures.The synergistic effects for CF3I/c-C4F8/70%N2 were most obvious when the c-C4F8 content was approximately 20%,and for CF3I/c-C4F8/70%CO2 when the c-C4F8 content was approximately 10%.On the basis of this research,CF3I/c-C4F8/70%N2 shows better insulation performance when the c-C4F8 content is in the15%–20%range.For CF3I/c-C4F8/70%CO2,when the c-C4F8 content is in the 10%–15%range,the gas mixtures have excellent performance.Hence,these gas systems might be used as alternative gas mixtures to SF6 in high-voltage equipment.展开更多
Accurate characterization of fluid phase behavior is an important aspect of CO_(2) enhanced shale oil recovery.So far,however,there has been little discussion about the nanopore confinement effect,including adsorption...Accurate characterization of fluid phase behavior is an important aspect of CO_(2) enhanced shale oil recovery.So far,however,there has been little discussion about the nanopore confinement effect,including adsorption and capillarity on the phase equilibrium of water-oil-CO_(2) mixtures.In this study,an improved three-phase flash algorithm is proposed for calculating the phase behavior of water-oil-gas mixture on the basis of an extended Young-Laplace equation and a newly developed fugacity calculation model.The fugacity model can consider the effect of water-oil-gas adsorption on phase equilibrium.A water-Bakken oil-CO_(2) mixture is utilized to verify the accuracy of the flash algorithm and investigate the confinement effect.Results show that the confinement effect promotes the transfer of all components in the vapor phase to other phases,while the transfer of water,CO_(2),and lighter hydrocarbons is more significant.This leads to a large decrease,a large increase,and a small increase in the mole fraction of the vapor,oleic,and aqueous phases,respectively.When the confinement effect is considered,the density difference of vaporoleic phases decreases,and the interfacial tension of vapor-oleic phases decreases;however,the density difference of vapor-aqueous phases increases,the interfacial tension of vapor-aqueous phases still decreases.展开更多
A simple model is described to simulate kinetic processes in dielectric barrier dis-charges for O2/NOx mixtures. A threshold of ozone production found experimentally is confirmedby the calculations of this modeling, a...A simple model is described to simulate kinetic processes in dielectric barrier dis-charges for O2/NOx mixtures. A threshold of ozone production found experimentally is confirmedby the calculations of this modeling, and the underiying chemical reaction mechanisms are dis-cussed. It is also found that the effects of diffusion processes in the period of the lifetime of Oatoms are not important to microdischarge channels with a large radius, i.e. larger than l50 μm.展开更多
The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and...The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and 1.0. Additional amounts of Cu and Zn sulphates were added to compensate the loss during the coprecipitation of the hydroxides. The ferritized samples were characterized by chemical analysis, XRD. DTA, TGA and SEM. XRD of both Zn0.2Cu0.8Fe2O4 and Zn0.5Cu0.5 Fe2O4 that indicates the formation of a heterogeneous ferrite material of ZnFe2O4 and CuFe2O4 mixed with variable amounts of α-Fe2O3. Zn and Cu ferrites were observed only in Zn0.8Cu0.2Fe2O4.From TGA-time relation, the activation energy of the different transformation phases were calculated. It is found that, the activation energy of ZnFe2O4 is slightly equal to 3/2 of that for CuFe2O4. Dielectric measurements show that the electrical behaviour depends on the ordering and disordering of the phases.展开更多
The non-chain chemical HF(DF)laser is one of the most powerful electrically-driven lasers operating in mid-infrared,in which SF6-C2H6 mixtures are often used as lasering media.Due to the electronegativity of SF6,the d...The non-chain chemical HF(DF)laser is one of the most powerful electrically-driven lasers operating in mid-infrared,in which SF6-C2H6 mixtures are often used as lasering media.Due to the electronegativity of SF6,the discharge in SF6-C2H6 presents a complicated discharge mode.To achieve reproducible pulsed laser output,pulsed discharge in SF6-C2H6 mixtures is investigated for discharge mode using plane electrodes assisted by array pre-ionization spark pins in cathode surface.Firstly,two modes can be distinguished.One mode is called the selfsustained volume discharge(SSVD),which is characterized by spatial uniformity in the discharge gap and pulse to pulse repeatability.On the contrary,another mode includes random arc passages in the discharge gap and therefore cannot conduct lasering.By varying discharge conditions(gap voltage,gas pressure,etc)two discharge modes are observed.Secondly,the holding scope of the SSVD mode is analyzed for the optimal mixture ratio of 20:1,and the boundary tend of the holding scope of SSVD indicates there exists maximum gas pressure and maximum charging voltage for SSVD.Finally,the peak current of SSVD relates positively to charging voltage,while negatively to gas pressure,from which it is drawn that synchronous electron avalanches initiated by the sliding array overlap spatially into SSVD and thus SSVD is essentially an α ionization avalanche.展开更多
The corrosion of an Fe-based alloy containing 15 wt pct Y in H2-H2S mixtures under 10-3 Pa S2 was studied at 600~800℃ in an attempt to find materials with improved sulphidation resistance with respect to pure Fe. The...The corrosion of an Fe-based alloy containing 15 wt pct Y in H2-H2S mixtures under 10-3 Pa S2 was studied at 600~800℃ in an attempt to find materials with improved sulphidation resistance with respect to pure Fe. The presence of Y has been shown to be beneflcial, but not sufficient to the level expected. In fact, the alloy is able to form at all tested temperatures an external FeS layer, beneath which a zone containing a mixture of the two sulphides is also present. Thus,Fe can still diffuse through this region to form the outer FeS layer with non-negligible rate. The corrosion rate of Fe is considerably reduced by the Y addition. but the alloy corrodes still much more rapidly than Y. The sulphidation kinetics is generally rather irregular for both the pure metals, while the corrosion rate of the alloy decreases with time and tends to become parabolic after an initial period of 12~17 h. The sulphidation behaviour of the alloys is discussed by taking into account the presence of an intermetallic compound Fe17Y2 and the limited solubility of Y in Fe展开更多
The agglomeration behavior of particles significantly impacts on the defluidization occurring in a fluidized bed during the direct reduction process.The influence of CO/H_(2)ratio on surface diffusion of iron atoms wa...The agglomeration behavior of particles significantly impacts on the defluidization occurring in a fluidized bed during the direct reduction process.The influence of CO/H_(2)ratio on surface diffusion of iron atoms was proposed,and the solid bridge force between iron oxide particles was quantificationally analyzed.Moreover,the solid bridge force was successfully added into a CFD–DEM(computational fluid dynamics–discrete element method)model combined with heat transfer and mass transport to investigate the detailed information of agglomeration in a fluidized bed,including the spatial distribution of temperature,velocity and metallization of iron oxide particles.The region of defluidization is sensitive to the reduction temperature.At the same reduction temperature,the iron oxide powder will perform higher metallization and stable fluidization properties with molar fraction of H_(2)in the range of 0.6–0.8,when iron oxide is reduced by CO/H_(2)mixture.展开更多
Arsenic(As)and chromium(Cr)are two harmful toxicants as well as carcinogens which can coexist in polluted surface water and groundwater.This coexistence leads to mixture effects in animals including fish.Both of these...Arsenic(As)and chromium(Cr)are two harmful toxicants as well as carcinogens which can coexist in polluted surface water and groundwater.This coexistence leads to mixture effects in animals including fish.Both of these heavy metals are reported to manifest reactive oxygen species(ROS)mediated toxicity.Though individual neurotoxic effects have been reported,their mixture effects,its mechanism and cellular responses against oxidative stress and DNA damages remain unknown.The present study evaluated the individual and mixture effects of As and Cr at their environmentally relevant concentrations in zebrafish(Danio rerio)brain after 15,30 and 60 days of exposure.Nrf2,a transcription factor is involved in the expressional regulation of enzymes needed to maintain cellular redox homeostasis.This study reported the expressional pattern of Nrf2 and its associated xenobiotic metabolizing enzyme Nqo1 and other markers of oxidative stress such as ROS generation,reduced glutathione level,lipid peroxidation and catalase activity.Increased malondialdehyde(MDA)content,glutathione level,and catalase activity indicated oxidative stress in exposed groups.In addition,this study revealed expressional alterations of neurotoxicity marker(ache),DNA repair(ogg1,apex1,creb1,polb,mlh1,msh2 and msh6)and tumor suppressor(p53,brca2)genes.Results of ROS generation,MDA level,histopathological analysis,gene expression and immunofluorescence study confirmed that As and Cr did not show antagonistic effects in combination rather indicated additive effects which was dose-dependent but not always linear.展开更多
基金Scientific Research Project of Hebei Province Administration of Traditional Chinese Medicine:to Explore the Protective Effect and Mechanism of Zexie Decoction on Lipotoxic Cardiomyopathy based on the p-mitogen-activated protein kinases/Peroxisome proliferator-activated receptorγcoactivator 1-alpha(p MAPK/PGC-1α)Signaling Pathway(No.2022096)Medical Science Research Project of Hebei Province:the Effect of 23-acetyl Alismol-B on Mitochondrial Function in Palmitic Acid-induced H9c2 Cells Was Investigated based on the Ca2+-Cyclic Adenosine Monophosphate(c AMP)-Response Element Binding Protein/c AMP Response Element(CREB/CRE)-PGC-1αSignaling Pathway(No.20221490)+1 种基金Hebei province natural science fund project:Study on the Mechanism of Danshen Zexie Decoction in Activating Nuclear Factor Erythroid 2-related Factor 2 Signaling Pathway to Trigger 0mi/Htr A2,Restoring Autophagic Flux and Enhancing Metabolism-Related Fatty Liver Disease(No.H2023423064)Hebei graduate student innovation ability funding training project:to Investigate the Protective Effects and Underlying Mechanisms of Zexie Decoction on Lipotoxic Cardiomyopathy,with A Focus on the PGC-1a Signaling Pathway(No.CXZZBS2022096)。
文摘OBJECTIVE:To investigate the mechanism of Dan Ze mixture(丹泽合剂,DZM)in the treatment of lipotoxic cardiomyopathy.METHODS:Ultra-performance liquid chromatography tandem mass spectrometry was employed to characterize the serum migration constituents of DZM.A lipotoxic cardiomyopathy rat model was established through high-fat diet and intervened by different doses of DZM.The cardiac function was assessed using echocardiography,and hematoxylin and eosin,oil red O,and Masson staining were conducted to evaluate morphological changes,lipid accumulation,and fibrosis in myocardial tissue.Serum myocardial enzyme activity,lipid levels,and lipid content of myocardial tissue were measured,while fluorescent staining and colorimetry were used to assess oxidation levels in myocardial tissue.Mitochondrial membrane potential was detected by 5,5',6,6'-Tetrachloro-1,1',3,3'-tetraethyl-imidacarbocyanineiodide(JC-1).Transmission electron microscopy was employed to observe ultrastructure and mitochondrial structure changes in myocardial tissue.Fluorescence double staining and colocalization were utilized to observe the binding of autophagosomes and mitochondria,while immunohistochemical staining was used to detect the expression of mitophagy-related proteins.Terminal deoxynucleoitidyl transferase mediated nick end labeling staining was employed for the identification of apoptosis in myocardial tissue,while quantitative real-time reverse transcriptase polymerase chain reaction(q RT-PCR)and Western blot were utilized for the detection of apoptosis,B-cell lymphoma-2 adenovirus E1B 19 k Da-interacting protein 3(BNIP3)/mitophagy signaling pathway-related genes and proteins.In palmitic acid-induced Rat H9C2 cardiomyocytes(H9c2)cells,various cellular parameters including cell viability,lactate dehydrogenase release,apoptosis rate,oxidative stress level,mitochondrial structure and function,and mitophagy level were assessed after the treatment of DZM drug-containing serum for a duration of 24 h.The cellular expressions of BNIP3/mitophagy signaling pathway relevant genes and proteins were further evaluated using q RT-PCR and Western blot techniques.RESULTS:A total of 295 prototypes(e.g.,phenolic acids,quinones,terpenoids)were identified in serum of rats after oral administration of DZM.In vivo,DZM therapy has been shown to effectively enhance cardiac function,mitigate high-fat diet-induced myocardial structural damage and lipid accumulation.Furthermore,DZM has demonstrated the ability to reduce lipid levels,attenuate cell apoptosis,combat oxidative stress,enhance mitochondrial structure and function,and activate the BNIP3/mitophagy signaling pathway.Furthermore,the silencing of BNIP3 has been shown to exacerbate palmitic acid-induced damages in H9c2 cells,while inhibiting the BNIP3/mitophagy signaling pathway can mitigate the inhibitory effects of DZM on palmitic acidinduced apoptosis,lipid deposition and oxidative stress.CONCLUSION:This study presents preliminary evidence for the therapeutic efficacy of DZM on lipotoxic cardiomyopathy through the activating BNIP3/mitophagy signaling pathway.
文摘The present paper renders a modeling and a 2D numerical simulation for the removal of CO_2from CO_2/CH_4gaseous stream utilizing sodium hydroxide(NaOH),monoethanolamine(MEA)and triethanolamine(TEA)liquid absorbents inside the hollow fiber membrane contactor.Counter-current arrangement of absorbing agents and CO_2/CH_4gaseous mixture flows are implemented in the modeling and numerical simulation.Non-wetting and partial wetting modes of operation are considered where in the partial wetting mode,CO_2/CH_4gaseous mixture and liquid absorbents fill the membrane pores.The deteriorated removal of CO_2in the partial wetting mode of operation is mainly due to the mass transfer resistance imposed by the liquid in the pores of membrane.The validation of numerical simulation is done based on the comparison of simulation results of CO_2removal using Na OH and experimental data under non-wetting mode of operation.The comparison illustrates a desirable agreement with an average deviation of less than 5%.According to the results,MEA provides higher efficiency for CO_2removal in comparison with the other liquid absorbents.The order for CO_2removal performance is MEAN Na OHN TEA.The influence of non-wetting and partial wetting modes of operation on CO_2removal are evaluated in this article as one of the novelties.Besides,the percentage of CO_2sequestration as a function of gas velocity for various percentages of membrane pores wetting ranging from 0(non-wetting mode of operation)to 100%(complete wetting mode of operation)is studied in this research paper,which can be proposed as the other novelty.The results indicate that increase in some operational parameters such as module length,membrane porosity and absorbents concentration encourage the removal percentage of CO_2from CO_2/CH_4gaseous mixture while increasing in membrane tortuosity,gas velocity and initial CO_2concentration has unfavorable influence on the separation efficiency of CO_2.
基金supported by the Ministry of Science and Technology Project of China(2009, No. GJB20011)
文摘The protective behavior for a molten AZ91D alloy in an open melting furnace was investigated under a protective gas mixture containing 3% SO2 and 97% CO2, and the protection mechanism was discussed. Experimental results show that the gas mixture provides effective protection for AZ91D melt in the temperature range from 680 ℃ to 730 ℃. The microstructure, chemical composition and phase composition of the surface film formed on the molten AZ91D alloy were analyzed using scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）. The SEM results demonstrate that the surface films with an average thickness between 0.5 pm and 2 pm are dense and coherent in the protected temperature range. The EDS results reveal that the surface film mainly contains elements S, C, O, AI and Mg. The XRD results show that the surface film consists of MgO, MgS and a small amount of C phase.
基金supported by the National Natural Science Foundation of China (Grant No. 51006083)the China Postdoctoral Science Foundation (Grant No. 20110491658)the Fundamental Research Funds for the Central Universities
文摘The potential energy snrface of a CO2-N2 mixture is determined by using an inversion method, together with a new collision integral correlation [J. Phys. Chem. R@ Data 19 1179 （1990）]. With the new invert potential, the transport properties of CO2-N2 mixture are presented in a temperature range front 273.15 K to 3273.15 K at low density by employing the Chapman-Enskog scheme and the Wang Chang-Uhlenbeck de Boer theory, consisting of a viscosity coefficient, a thermal conductivity coefficient, a binary diffusion coefficient, and a thermal diffusion factor. The accuracy of the predicted results is estimated to be 2% for viscosity, 5% for thermal conductivity, and 10% for binary diffusion coefficient.
基金Project 51306198 supported by the National Natural Science Foundation of China
文摘Low critical temperature limits the application of CO_2 trans-critical power cycle.The binary mixture of R290/CO_2has higher critical temperature.Using mixture fluid may solve the problem that subcritical CO_2 is hardly condensed by conventional cooling water.In this article,theoretical analysis is executed to study the performance of the zeotropic mixture for trans-critical power cycle using low-grade liquid heat source with temperature of200℃.The results indicated that the problem that CO_2 can't be condensed in power cycle by conventional cooling water can be solved by mixing R290 to CO_2.Variation trend of outlet temperature of thermal oil in supercritical heater with heating pressure is determined by the composition of the mixture fluid.Gliding temperature causes the maximum outlet temperature of cooling water with the increase of mass fraction of R290.There are the maximum values for cycle thermal efficiency and net power output with the increase of supercritical heating pressure.
基金the Talent Scientific Research Fund of LSHU (No. 2016XJJ-015)the fund of the Liaoning Provincial Department of Education (No. L2017LQN005)the National Natural Science Foundation of China (No. 21606120)
文摘Seven types of activated carbon were used to investigate the effect of their structure on separation of CO2 from（H2 ＋ CO2） gas mixture by the adsorption method at ambient temperature and higher pressures. The results showed that the limiting factors for separation of CO2 from 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture and from 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture were different at 20 °C and about 2 MPa. The best separation result could be achieved when the pore diameter of the activated carbon ranged from 0.77 to 1.20 nm, and the median particle size was about2.07 lm for 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture and 1.41 lm for 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture. The effect of specific area and pore diameter of activated carbon on separation CO2 from 53.6 mol% H2 ＋ 46.4 mol% CO2 mixture was more significant than that from 85.1 mol% H2 ＋ 14.9 mol% CO2 mixture. CO2 in the gas phase can be decreased from 46.4 mol% to 2.3 mol%–4.3 mol% with a two-stage separation process.
基金supported by National Natural Science Foundation of China(No.10875093)
文摘We calculated the uniform dielectric breakdown field strength of residual 30% CF3I/CO2 gas mixtures during the arc extinction process over the temperature range 300-3500 K at 0.1 MPa. The limiting reduced field strengths are decided by a balance of electron generation and loss based on chemical reactions estimated by the electron energy distribution function （EEDF）, which employs the Boltzmann equation method with two-term expanding approximation in the steady-state Townsend （SST） condition. During the insulation recovery phase, the hot CF3I/CO2 gas mixtures have maximum dielectric strength at a temperature of about 1500 K. At room temperature 300 K, the electric strength after arc extinction （90.3 Td, 1 Td=10-21 V.m2） is only 38% of the original value before arc （234.9 Td）. The adverse insulation recovery ability of CF3I/CO2 gas mixtures in arc extinction hinders its application in electric circuit breakers and other switchgears as an arc quenching and insulating medium.
基金supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Education (No.NRF 2017R1D1A1B03036324)supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)the Ministry of Trade,Industry & Energy (MOTIE) of the Republic of Korea (No.20174010201160)
文摘The development of carbon dioxide(CO_2) sorbents that can operate at elevated temperatures is significant for the advancement of pre-combustion capture technologies.Recently, promoter-based systems composed of alkali/alkaline earth metal nitrates and/or carbonates have been considered as next-generation solid sorbents due to their improved CO_2 uptake and kinetics. However, obtaining stable MgO sorbents against temperature swing regeneration still remained challenging. Herein, we report MgO-TiO_2 solid sorbents promoted by eutectic mixture(KNO_3 and LiNO_3) for elevated temperature CO_2 sorption. The developed sorbents show improved CO_2 sorption capacity, which may be attributed to the alternative CO_2 sorption pathway provided by the ionization of highly dispersed MgO in the eutectic mixture. The MgO-TiO_2 framework was also shown to assist in retaining the MgO configuration by constraining its interaction with CO_2. Furthermore, it is demonstrated that constructing composite structures is essential to improve the CO_2 sorption characteristics,mainly recyclability, at elevated temperatures. The developed promoter integrated sorbents showed exceptionally high CO_2 sorption capacity of > 30 wt.% at an elevated temperature(300°C) with pronounced stability under temperature swing operation.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.41922023 and 41830425)the Fundamental Research Funds for the Central Universities(Grant Nos.020614380056 and 020614380078).
文摘We re-evaluate the Raman spectroscopic quantification of the molar ratio and pressure for CH4–CO2 mixtures.Firstly,the Raman quantification factors of CH4 and CO2 increase with rising pressure at room temperature,indicating that Raman quantification of CH4/CO2 molar ratio can be applied to those fluid inclusions(FIs)with high internal pressure(i.e.,>15 MPa).Secondly,the v1(CH4)peak position shifts to lower wavenumber with increasing pressure at constant temperature,confirming that the v1(CH4)peak position can be used to calculate the fluid pressure.However,this method should be carefully calibrated before applying to FI analyses because large discrepancies exist among the reported v1(CH4)-P curves,especially in the highpressure range.These calibrations are applied to CH4-rich FIs in quartz veins of the Silurian Longmaxi black shales in southern Sichuan Basin.The vapor phases of these FIs are mainly composed of CH4 and minor CO2,with CO2 molar fractions from4.4%to 7.4%.The pressure of single-phase gas FI ranges from 103.65 to 128.35 MPa at room temperature,which is higher than previously reported.Thermodynamic calculations supported the presence of extremely high-pressure CH4-saturated fluid(218.03–256.82 MPa at 200°C),which may be responsible for the expulsion of CH4 to adjacent reservoirs.
基金supported by National Natural Science Foundation of China(51072096)National Basic Research Program of China(2010CB732304)National High-Tech Research and Development Program of China(2013AA065302)
文摘MnO and CeO2 powders were mechanically mixed by a spatula and by milling to obtain loose-contact and tight-contact mixed oxides,respectively.The monoxides and their physical mixtures were characterized by X-ray diffraction（XRD）,Brunauer-Emmett-Teller（BET）,X-ray photoelectron spectroscopy（XPS）,Raman,O2 temperature-programmed desorption（O2-TPD）,H2 temperature-programmed reduction（H2-TPR） and NO temperature-programmed oxidation（NO-TPO）.The MnOx-CeO2 solid solutions did not form without any calcination process.The oxidation state of manganese tended to increase while the ionic valence of cerium decreased in the mixed oxides,accompanied with the formation of oxygen vacancies.This long-ranged electronic interaction occured more significantly in the tight-contact mixture of MnO and CeO2.The formation of more Mn4＋and oxygen vacancies promoted the catalytic oxidation of NO in an oxygen-rich atmosphere.
基金Item Sponsored by National Natural Science Foundation of China(50874072)Natural Science Foundation of Jiangsu Province of China(BK20130308)China Postdoctoral Science Foundation(2014M561710)
文摘The viscosities for the selected CaO-MgO-SiO2 and CaO-MgO Al2 O3-SiO2 slags were measured by rota- ting cylinder method in a wide temperature range from 1608 K to 1 823 K. The effects of temperature, slag basicity and Al2 O3 content were studied. The results indicated that the viscosity decreased with increasing the slag basicity at the same temperature. And the viscosities of the slag initially increased linearly with increasing Al2 O3 content in the slags and then decreased as the Al2 O3 content in the slags continued to increase. Al2 O3 addition has a more signifi- cant effect on the viscosity than slag basicity in the selected slags. Based on the experimental data and the fraction of solid phases calculated by the thermodynamic software, the effect of solid phases on slag viscosity was evaluated. The results indicated that the relationship between the relative viscosity and the volume fraction of solid phases esti- mated from the slag composition can be reasonable by allowing the inverse maximum fraction of solid particles to vary.
基金Supported by the National Key Research and Development Plan of China(2017YFC0307306)National Natural Science Foundation of China(51676197,51576197)+2 种基金CAS Program(KGZD-EW-301)Guangzhou Science and Technology Project(201804010411)Youth Innovation Promotion Association CAS
文摘To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(150–250μm)was investigated in a semibatch vessel at variable temperatures(273,275,and 277 K)and pressures(5.8–7.8 MPa).During the gas hydrate reaction process,the changes in the gaseous phase composition were determined by gas chromatography.The results indicate that the gas hydrate formation process of the binary CO2/N2 gas mixture in fine sediments can be reduced to two stages.Firstly,the dissolved gas containing a large amount of CO2 formed gas hydrates,and then gaseous N2 participated in the gas hydrate formation.In the second stage,all the dissolved gas was consumed.Thus,both gaseous CO2 and N2 diffused into sediment.The first stage in different experiments lasted for 5–15 h,and>60%of the gas was consumed in this period.The gas consumption rate was greater in the first stage than in the second stage.After the completion of gas hydrate formation,the CO2 content in the gas hydrate was more than that in the gas phase.This indicates that CO2 formed hydrate easily than N2 in the binary mixture.Higher operating pressures and lower temperatures increased the gas consumption rate of the binary gas mixture in gas hydrate formation.
基金supported by National Natural Science Foundation of China(No.51337006)。
文摘CF3I gas mixtures have attracted considerable attention as potential environmentally-friendly alternatives to SF6 gas,owing to their excellent insulating performance.This paper attempts to study the CF3I ternary gas mixtures with c-C4F8 and buffer gases N2 and CO2 by considering dielectric strength from electron transport parameters based on the Boltzmann method and synergistic effect analysis,compared with SF6 gas mixtures.The results confirm that the critical electric field strength of CF3I/c-C4F8/70%CO2 is greater than that of 30%SF6/70%CO2 when the CF3I content is greater than 17%.Moreover,a higher content of c-C4F8 decreases the sensitivity of gas mixtures to an electric field,and this phenomenon is more obvious in CF3I/c-C4F8/CO2 gas mixtures.The synergistic effects for CF3I/c-C4F8/70%N2 were most obvious when the c-C4F8 content was approximately 20%,and for CF3I/c-C4F8/70%CO2 when the c-C4F8 content was approximately 10%.On the basis of this research,CF3I/c-C4F8/70%N2 shows better insulation performance when the c-C4F8 content is in the15%–20%range.For CF3I/c-C4F8/70%CO2,when the c-C4F8 content is in the 10%–15%range,the gas mixtures have excellent performance.Hence,these gas systems might be used as alternative gas mixtures to SF6 in high-voltage equipment.
基金The financial support from National Natural Science Foundation of China(52074319,U19B6003-02)Strategic Cooperation Technology Project of CNPC(ZLZX 2020-01-08)。
文摘Accurate characterization of fluid phase behavior is an important aspect of CO_(2) enhanced shale oil recovery.So far,however,there has been little discussion about the nanopore confinement effect,including adsorption and capillarity on the phase equilibrium of water-oil-CO_(2) mixtures.In this study,an improved three-phase flash algorithm is proposed for calculating the phase behavior of water-oil-gas mixture on the basis of an extended Young-Laplace equation and a newly developed fugacity calculation model.The fugacity model can consider the effect of water-oil-gas adsorption on phase equilibrium.A water-Bakken oil-CO_(2) mixture is utilized to verify the accuracy of the flash algorithm and investigate the confinement effect.Results show that the confinement effect promotes the transfer of all components in the vapor phase to other phases,while the transfer of water,CO_(2),and lighter hydrocarbons is more significant.This leads to a large decrease,a large increase,and a small increase in the mole fraction of the vapor,oleic,and aqueous phases,respectively.When the confinement effect is considered,the density difference of vaporoleic phases decreases,and the interfacial tension of vapor-oleic phases decreases;however,the density difference of vapor-aqueous phases increases,the interfacial tension of vapor-aqueous phases still decreases.
文摘A simple model is described to simulate kinetic processes in dielectric barrier dis-charges for O2/NOx mixtures. A threshold of ozone production found experimentally is confirmedby the calculations of this modeling, and the underiying chemical reaction mechanisms are dis-cussed. It is also found that the effects of diffusion processes in the period of the lifetime of Oatoms are not important to microdischarge channels with a large radius, i.e. larger than l50 μm.
文摘The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and 1.0. Additional amounts of Cu and Zn sulphates were added to compensate the loss during the coprecipitation of the hydroxides. The ferritized samples were characterized by chemical analysis, XRD. DTA, TGA and SEM. XRD of both Zn0.2Cu0.8Fe2O4 and Zn0.5Cu0.5 Fe2O4 that indicates the formation of a heterogeneous ferrite material of ZnFe2O4 and CuFe2O4 mixed with variable amounts of α-Fe2O3. Zn and Cu ferrites were observed only in Zn0.8Cu0.2Fe2O4.From TGA-time relation, the activation energy of the different transformation phases were calculated. It is found that, the activation energy of ZnFe2O4 is slightly equal to 3/2 of that for CuFe2O4. Dielectric measurements show that the electrical behaviour depends on the ordering and disordering of the phases.
基金National Natural Science Foundation of China(No.11375041).
文摘The non-chain chemical HF(DF)laser is one of the most powerful electrically-driven lasers operating in mid-infrared,in which SF6-C2H6 mixtures are often used as lasering media.Due to the electronegativity of SF6,the discharge in SF6-C2H6 presents a complicated discharge mode.To achieve reproducible pulsed laser output,pulsed discharge in SF6-C2H6 mixtures is investigated for discharge mode using plane electrodes assisted by array pre-ionization spark pins in cathode surface.Firstly,two modes can be distinguished.One mode is called the selfsustained volume discharge(SSVD),which is characterized by spatial uniformity in the discharge gap and pulse to pulse repeatability.On the contrary,another mode includes random arc passages in the discharge gap and therefore cannot conduct lasering.By varying discharge conditions(gap voltage,gas pressure,etc)two discharge modes are observed.Secondly,the holding scope of the SSVD mode is analyzed for the optimal mixture ratio of 20:1,and the boundary tend of the holding scope of SSVD indicates there exists maximum gas pressure and maximum charging voltage for SSVD.Finally,the peak current of SSVD relates positively to charging voltage,while negatively to gas pressure,from which it is drawn that synchronous electron avalanches initiated by the sliding array overlap spatially into SSVD and thus SSVD is essentially an α ionization avalanche.
文摘The corrosion of an Fe-based alloy containing 15 wt pct Y in H2-H2S mixtures under 10-3 Pa S2 was studied at 600~800℃ in an attempt to find materials with improved sulphidation resistance with respect to pure Fe. The presence of Y has been shown to be beneflcial, but not sufficient to the level expected. In fact, the alloy is able to form at all tested temperatures an external FeS layer, beneath which a zone containing a mixture of the two sulphides is also present. Thus,Fe can still diffuse through this region to form the outer FeS layer with non-negligible rate. The corrosion rate of Fe is considerably reduced by the Y addition. but the alloy corrodes still much more rapidly than Y. The sulphidation kinetics is generally rather irregular for both the pure metals, while the corrosion rate of the alloy decreases with time and tends to become parabolic after an initial period of 12~17 h. The sulphidation behaviour of the alloys is discussed by taking into account the presence of an intermetallic compound Fe17Y2 and the limited solubility of Y in Fe
基金the National Natural Science Foundation Project of China(51374263 and 51974046).
文摘The agglomeration behavior of particles significantly impacts on the defluidization occurring in a fluidized bed during the direct reduction process.The influence of CO/H_(2)ratio on surface diffusion of iron atoms was proposed,and the solid bridge force between iron oxide particles was quantificationally analyzed.Moreover,the solid bridge force was successfully added into a CFD–DEM(computational fluid dynamics–discrete element method)model combined with heat transfer and mass transport to investigate the detailed information of agglomeration in a fluidized bed,including the spatial distribution of temperature,velocity and metallization of iron oxide particles.The region of defluidization is sensitive to the reduction temperature.At the same reduction temperature,the iron oxide powder will perform higher metallization and stable fluidization properties with molar fraction of H_(2)in the range of 0.6–0.8,when iron oxide is reduced by CO/H_(2)mixture.
基金the Department of Zoology,Visva-Bharati for providing infrastructural supportSreejata Kamila is grateful to the Council of Scientific and Industrial Research(CSIR),India for Senior Research Fellowship(CSIR File No.09/202(0102)/2019-EMR-I)+2 种基金Koushik Kumar Dey acknowledges the Department of Biotechnology,New Delhi for research fellowship(No.BT/PR28560/AAQ/3/919/2018)Shehnaz Islam is thankful to Maulana Azad National Fellowship(UGC ref ID-201920–345938)India for her financial support.
文摘Arsenic(As)and chromium(Cr)are two harmful toxicants as well as carcinogens which can coexist in polluted surface water and groundwater.This coexistence leads to mixture effects in animals including fish.Both of these heavy metals are reported to manifest reactive oxygen species(ROS)mediated toxicity.Though individual neurotoxic effects have been reported,their mixture effects,its mechanism and cellular responses against oxidative stress and DNA damages remain unknown.The present study evaluated the individual and mixture effects of As and Cr at their environmentally relevant concentrations in zebrafish(Danio rerio)brain after 15,30 and 60 days of exposure.Nrf2,a transcription factor is involved in the expressional regulation of enzymes needed to maintain cellular redox homeostasis.This study reported the expressional pattern of Nrf2 and its associated xenobiotic metabolizing enzyme Nqo1 and other markers of oxidative stress such as ROS generation,reduced glutathione level,lipid peroxidation and catalase activity.Increased malondialdehyde(MDA)content,glutathione level,and catalase activity indicated oxidative stress in exposed groups.In addition,this study revealed expressional alterations of neurotoxicity marker(ache),DNA repair(ogg1,apex1,creb1,polb,mlh1,msh2 and msh6)and tumor suppressor(p53,brca2)genes.Results of ROS generation,MDA level,histopathological analysis,gene expression and immunofluorescence study confirmed that As and Cr did not show antagonistic effects in combination rather indicated additive effects which was dose-dependent but not always linear.
