期刊文献+
共找到77篇文章
< 1 2 4 >
每页显示 20 50 100
Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model 被引量:7
1
作者 杜静静 宋春跃 李平 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2007年第4期533-538,共6页
A novel control strategy for a continuous stirred tank reactor(CSTR)system,which has the typical characteristic of strongly pronounced nonlinearity,multiple operating points,and a wide operating range,is initiated fro... A novel control strategy for a continuous stirred tank reactor(CSTR)system,which has the typical characteristic of strongly pronounced nonlinearity,multiple operating points,and a wide operating range,is initiated from the point of hybrid systems.The proposed scheme makes full use of the modeling power of mixed logical dy- namical(MLD)systems to describe the highly nonlinear dynamics and multiple operating points in a unified framework as a hybrid system,and takes advantage of the good control quality of model predictive control(MPC) to design a controller.Thus,this approach avoids oscillation during switching between sub-systems,helps to relieve shaking in transition,and augments the stability robustness of the whole system,and finally achieves optimal(i.e. fast and smooth)transition between operating points.The simulation results demonstrate that the presented ap- proach has a satisfactory performance. 展开更多
关键词 continuous stirred tank reactor mixed logical dynamical model multiple-operating point state transition hybrid system
在线阅读 下载PDF
Research on Mixed Logic Dynamic Modeling and Finite Control Set Model Predictive Control of Multi-Inverter Parallel System
2
作者 Xiaojuan Lu Mengqiao Chen Qingbo Zhang 《Energy Engineering》 EI 2023年第3期649-664,共16页
Parallel connection of multiple inverters is an important means to solve the expansion,reserve and protection of distributed power generation,such as photovoltaics.In view of the shortcomings of traditional droop cont... Parallel connection of multiple inverters is an important means to solve the expansion,reserve and protection of distributed power generation,such as photovoltaics.In view of the shortcomings of traditional droop control methods such as weak anti-interference ability,low tracking accuracy of inverter output voltage and serious circulation phenomenon,a finite control set model predictive control(FCS-MPC)strategy of microgrid multiinverter parallel system based on Mixed Logical Dynamical(MLD)modeling is proposed.Firstly,the MLD modeling method is introduced logical variables,combining discrete events and continuous events to form an overall differential equation,which makes the modeling more accurate.Then a predictive controller is designed based on the model,and constraints are added to the objective function,which can not only solve the real-time changes of the control system by online optimization,but also effectively obtain a higher tracking accuracy of the inverter output voltage and lower total harmonic distortion rate(Total Harmonics Distortion,THD);and suppress the circulating current between the inverters,to obtain a good dynamic response.Finally,the simulation is carried out onMATLAB/Simulink to verify the correctness of the model and the rationality of the proposed strategy.This paper aims to provide guidance for the design and optimal control of multi-inverter parallel systems. 展开更多
关键词 Multiple inverters in parallel microgrid mixed logic dynamic model finite control set model predictive control circulation
在线阅读 下载PDF
基于MLD-MPC的快速路出口与辅路协调控制 被引量:7
3
作者 王力 李志军 +1 位作者 修伟杰 刘小明 《控制工程》 CSCD 北大核心 2014年第4期487-490,495,共5页
城市交通信号控制系统是典型的混杂控制系统。针对当前大中城市普遍存在的快速路出口匝道、辅路及下游交叉口的信号协调控制问题,研究了一种多信号自适应控制方法,以保证出口匝道排队长度较小且下游交叉口排队不溢流。首先,基于车道路... 城市交通信号控制系统是典型的混杂控制系统。针对当前大中城市普遍存在的快速路出口匝道、辅路及下游交叉口的信号协调控制问题,研究了一种多信号自适应控制方法,以保证出口匝道排队长度较小且下游交叉口排队不溢流。首先,基于车道路段当量排队长度建立状态方程,分别选取出口匝道、辅路交叉口和下游交叉口排队长度为连续状态变量,信号灯切换信号为离散控制变量;其次,以有限排队长度为模型约束,建立了包含快速路出口匝道、辅路及下游交叉口排队长度和信号状态的混合逻辑动态MLD模型;然后,比较研究了快速路出口匝道有信号灯控、无信号灯控两种不同情况下的MPC模型预测控制方法。仿真结果表明,基于MLD-MPC的控制方法可解决快速路出口匝道与辅路及下游交叉口的多交叉口信号协调控制问题。 展开更多
关键词 快速路出口与辅路协调控制 混合逻辑动态建模 模型预测控制
原文传递
基于MLD模型GTAW焊接熔透控制方法仿真研究
4
作者 丁鸣艳 马宏波 陈善本 《上海交通大学学报》 EI CAS CSCD 北大核心 2010年第S1期1-3,7,共4页
针对GTAW非线性焊接过程的混杂特性,给出混杂系统的建模方法,描述成混合逻辑动态(MLD)模型,并研究其GTAW焊接熔透控制策略.仿真的结果表明,该算法有效,能使系统输出稳定在设定点.为研究MLD建模在焊接过程控制中的实际应用起步研究奠定... 针对GTAW非线性焊接过程的混杂特性,给出混杂系统的建模方法,描述成混合逻辑动态(MLD)模型,并研究其GTAW焊接熔透控制策略.仿真的结果表明,该算法有效,能使系统输出稳定在设定点.为研究MLD建模在焊接过程控制中的实际应用起步研究奠定了基础. 展开更多
关键词 混合逻辑动态 焊接 焊接柔性制造系统 控制策略
在线阅读 下载PDF
MLD模型下逆变电路改进型直接功率预测控制
5
作者 韩建定 齐蓉 +2 位作者 张建业 李雪丰 王传奇 《空军工程大学学报(自然科学版)》 CSCD 北大核心 2018年第1期65-71,78,共8页
建立了新型逆变电路精确的混合逻辑动态(MLD)模型,并将其作为预测模型,研究了新型逆变电路基于预测直接功率控制(P-DPC)的模型预测控制方法。为了达到航空电源电压输出要求和降低开关损耗,在原来的3+3电压矢量控制序列法的基础上扩充了... 建立了新型逆变电路精确的混合逻辑动态(MLD)模型,并将其作为预测模型,研究了新型逆变电路基于预测直接功率控制(P-DPC)的模型预测控制方法。为了达到航空电源电压输出要求和降低开关损耗,在原来的3+3电压矢量控制序列法的基础上扩充了零矢量进行了改进,形成了一种新的对称的4+4电压矢量序列法,通过对下一时刻输出电压有功和无功分量的预测,在最小化目标函数值的基础上求出每一个电压矢量的作用时间,完成电路的控制。该方法减小了输出电压THD,具有良好动静态特性有一个较为稳定的开关频率,仿真和实验验证了所提方法的可行性和有效性。 展开更多
关键词 混合逻辑动态模型 逆变电路 模型预测控制 电压矢量
在线阅读 下载PDF
基于ESO-MLD的逆变器开路故障快速诊断方法 被引量:2
6
作者 王霞霞 陈超波 +1 位作者 杨雪芹 高嵩 《电源学报》 CSCD 北大核心 2021年第3期153-162,共10页
为了减小电机驱动系统中未知干扰对逆变器开路故障诊断的影响,提出了一种基于扩展观测器ESO(extended state observer)和混合逻辑动态MLD(mixed logic dynamic)模型的逆变器开路故障快速诊断方法。通过分析开关管在正常工作和故障状态... 为了减小电机驱动系统中未知干扰对逆变器开路故障诊断的影响,提出了一种基于扩展观测器ESO(extended state observer)和混合逻辑动态MLD(mixed logic dynamic)模型的逆变器开路故障快速诊断方法。通过分析开关管在正常工作和故障状态下的电流流向路径,建立了逆变器的混合逻辑动态模型,并设计了一种电压扩展观测器。根据观测器的观测电压和实际系统输出电压之间的相电压残差进行故障检测,通过故障相残差与正常两相残差之间的数值关系来定位故障相和故障管。该方法有效减小了系统中未知干扰和不确定因素对逆变器故障诊断的影响,提高了故障诊断率。最后,通过Matlab/Simulink仿真验证了该方法的正确性和有效性。 展开更多
关键词 电机驱动系统 扩张观测器 混合逻辑动态模型 开路故障
在线阅读 下载PDF
基于MLD的微电网多逆变器并联组态的建模及优化控制 被引量:1
7
作者 周东来 龚仁喜 +1 位作者 彭立亮 刘畅 《广西大学学报(自然科学版)》 CAS 北大核心 2016年第5期1485-1492,共8页
针对现有微网逆变器并联系统建模精度不高、控制方案复杂、控制效果不理想等问题,文中提出了一种基于混合逻辑动态(MLD)的光伏微网多并联逆变器的建模和优化控制方法。该方法将每个开关周期分为多个子周期,同时引入逻辑变量来判断系统... 针对现有微网逆变器并联系统建模精度不高、控制方案复杂、控制效果不理想等问题,文中提出了一种基于混合逻辑动态(MLD)的光伏微网多并联逆变器的建模和优化控制方法。该方法将每个开关周期分为多个子周期,同时引入逻辑变量来判断系统运行的动态模式;然后用HYSDEL工具编程得到MLD模型;最后根据系统的自然约束及系统控制目标设计预测控制器,并通过求解相应的整数线性规划问题达到减少输出电压跟踪误差及各逆变器之间的环流的目标。相较传统的建模与控制方法,该方法具有模型精度高、控制方案简便、控制效果好的特点。仿真结果验证了模型的正确性和控制器性能的优越性。 展开更多
关键词 微电网 并联逆变器 混合逻辑动态建模 模型预测控制
在线阅读 下载PDF
A Hybrid Approach to Modeling and Control of Vehicle Height for Electronically Controlled Air Suspension 被引量:8
8
作者 SUN Xiaoqiang CAI Yingfeng +2 位作者 WANG Shaohua LIU Yanling CHEN Long 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2016年第1期152-162,共11页
The control problems associated with vehicle height adjustment of electronically controlled air suspension (ECAS) still pose theoretical challenges for researchers, which manifest themselves in the publications on t... The control problems associated with vehicle height adjustment of electronically controlled air suspension (ECAS) still pose theoretical challenges for researchers, which manifest themselves in the publications on this subject over the last years. This paper deals with modeling and control of a vehicle height adjustment system for ECAS, which is an example of a hybrid dynamical system due to the coexistence and coupling of continuous variables and discrete events. A mixed logical dynamical (MLD) modeling approach is chosen for capturing enough details of the vehicle height adjustment process. The hybrid dynamic model is constructed on the basis of some assumptions and piecewise linear approximation for components nonlinearities. Then, the on-off statuses of solenoid valves and the piecewise approximation process are described by propositional logic, and the hybrid system is transformed into the set of linear mixed-integer equalities and inequalities, denoted as MLD model, automatically by HYSDEL. Using this model, a hybrid model predictive controller (HMPC) is tuned based on online mixed-integer quadratic optimization (MIQP). Two different scenarios are considered in the simulation, whose results verify the height adjustment effectiveness of the proposed approach. Explicit solutions of the controller are computed to control the vehicle height adjustment system in realtime using an offline multi-parametric programming technology (MPT), thus convert the controller into an equivalent explicit piecewise affine form. Finally, bench experiments for vehicle height lifting, holding and lowering procedures are conducted, which demonstrate that the HMPC can adjust the vehicle height by controlling the on-off statuses of solenoid valves directly. This research proposes a new modeling and control method for vehicle height adjustment of ECAS, which leads to a closed-loop system with favorable dynamical properties. 展开更多
关键词 electronically controlled air suspension vehicle height control hybrid system mixed logical dynamical model predictive control
在线阅读 下载PDF
基于MLD的加权区间预测控制 被引量:1
9
作者 戚龙欣 王宇红 《石油化工自动化》 CAS 2016年第3期36-40,共5页
针对生产过程中某些被控变量并没有苛刻的设定值要求,只要满足在给定区间内即可的问题,提出了一种基于混合逻辑动态模型的加权区间预测控制算法,在控制器设计中引入逻辑变量,将基于逻辑命题的目标函数以约束条件的形式集成到预测控制器... 针对生产过程中某些被控变量并没有苛刻的设定值要求,只要满足在给定区间内即可的问题,提出了一种基于混合逻辑动态模型的加权区间预测控制算法,在控制器设计中引入逻辑变量,将基于逻辑命题的目标函数以约束条件的形式集成到预测控制器模型框架下。通过逻辑变量的取值检测被控变量预测值所处的偏差区域,设定相应的误差权重值,使预测控制根据输出在不同的偏差区域范围,采取不同的控制强度,从而保证快速控制的同时满足稳定控制的要求。通过对Shell塔的仿真,验证了算法的有效性。 展开更多
关键词 混合逻辑动态 预测控制 偏差区域 权重
在线阅读 下载PDF
A Hybrid Model Predictive Control for Handling Infeasibility and Constraint Prioritization 被引量:4
10
作者 王宇红 黄德先 金以慧 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2005年第2期211-217,共7页
A hybrid approach using MLD (mixed logical dynamical) framework to handle infeasibility and constraint prioritization issues in MPC (model predictive control) based on input-output model is introduced. By expressing c... A hybrid approach using MLD (mixed logical dynamical) framework to handle infeasibility and constraint prioritization issues in MPC (model predictive control) based on input-output model is introduced. By expressing constraint priorities as propositional logics and by transforming the propositional logics into inequalities,the infeasibility and constraint prioritization issues are solved in the MPC. Constraints with higher priorities are met first, and then these with lower priorities are satisfied as much as possible. This new approach is illustrated in the control of a heavy oil fractionator-Shell column. The overall control performance has been significantly improved through the infeasibility and control priorities handling. 展开更多
关键词 model predictive control FEASIBILITY mixed logical dynamical system PRIORITY hybrid system
在线阅读 下载PDF
城市排水系统混合逻辑动态(MLD)建模方法及应用 被引量:5
11
作者 韩冠宇 邱依婷 +2 位作者 王浩正 吴伟龙 刘杰 《给水排水》 CSCD 北大核心 2022年第3期131-138,共8页
传统的排水系统机理模型在城市排水系统精细化模拟和设计评估方面应用广泛,但是在以排水系统优化控制为主攻方向的实时控制模式中,机理模型的计算复杂性与低时效性不利于与优化系统结合,难以形成较为完善的模拟-预测-优化体系。混合逻... 传统的排水系统机理模型在城市排水系统精细化模拟和设计评估方面应用广泛,但是在以排水系统优化控制为主攻方向的实时控制模式中,机理模型的计算复杂性与低时效性不利于与优化系统结合,难以形成较为完善的模拟-预测-优化体系。混合逻辑动态法作为一种广泛应用在物理过程建模和自动控制领域的线性离散化模拟手段,通过研究其在排水系统中的建模原理与优化方式,并通过案例分析其模拟与优化的准确性与可靠性,展现了其在城市排水系统模拟领域的应用潜力和价值。 展开更多
关键词 城市排水系统 优化控制 混合逻辑动态 线性离散模型
在线阅读 下载PDF
Multi-model predictive control with local constraints based on model switching 被引量:3
12
作者 Zhenkuang XUE Shaoyuan LI 《控制理论与应用(英文版)》 EI 2005年第2期150-156,共7页
Because model switching system is a typical form of Takagi-Sugeno(T-S) model which is an universal approximator of continuous nonlinear systems, we describe the model switching system as mixed logical dynamical (ML... Because model switching system is a typical form of Takagi-Sugeno(T-S) model which is an universal approximator of continuous nonlinear systems, we describe the model switching system as mixed logical dynamical (MLD) system and use it in model predictive control (MPC) in this paper. Considering that each local model is only valid in each local region,we add local constraints to local models. The stability of proposed multi-model predictive control (MMPC) algorithm is analyzed, and the performance of MMPC is also demonstrated on an inulti-multi-output(MIMO) simulated pH neutralization process. 展开更多
关键词 Multi-model predictive control Local constraints mixed logical dynamical system STABILITY
在线阅读 下载PDF
Predictive Control Based on Fuzzy Supervisor for PWARX Hybrid Model
13
作者 Olfa Yahya Zeineb Lassoued Kamel Abderrahim 《International Journal of Automation and computing》 EI CSCD 2019年第5期683-695,共13页
In this paper, the problem of hybrid model predictive control(HMPC) strategy based on fuzzy supervisor for piecewise autoregressive with exogenous input(PWARX) models is addressed. We first represent the nonlinear beh... In this paper, the problem of hybrid model predictive control(HMPC) strategy based on fuzzy supervisor for piecewise autoregressive with exogenous input(PWARX) models is addressed. We first represent the nonlinear behavior of the system with a PWARX model. Then, we transform the obtained PWARX model into a mixed logical dynamic(MLD) model in order to apply the proposed predictive control which is able to stabilize such systems along desired reference trajectories while satisfying operating constraints.Finally, we propose to introduce a fuzzy supervisor allowing the readjustment of the HMPC tuning parameters in order to maintain the desired performance. Simulation and experimental results are presented to illustrate the effectiveness of the proposed approach. 展开更多
关键词 Nonlinear CONTROL hybrid systems mixed logical dynamic(mld) model PREDICTIVE CONTROL FUZZY SUPERVISOR
原文传递
MLD-MPC Approach for Three-Tank Hybrid Benchmark Problem
14
作者 Hanen Yaakoubi Hegazy Rezk +1 位作者 Mujahed Al-Dhaifallah Joseph Haggège 《Computers, Materials & Continua》 SCIE EI 2023年第5期3657-3675,共19页
The present paper aims at validating a Model Predictive Control(MPC),based on the Mixed Logical Dynamical(MLD)model,for Hybrid Dynamic Systems(HDSs)that explicitly involve continuous dynamics and discrete events.The p... The present paper aims at validating a Model Predictive Control(MPC),based on the Mixed Logical Dynamical(MLD)model,for Hybrid Dynamic Systems(HDSs)that explicitly involve continuous dynamics and discrete events.The proposed benchmark system is a three-tank process,which is a typical case study of HDSs.The MLD-MPC controller is applied to the level control of the considered tank system.The study is initially focused on the MLD approach that allows consideration of the interacting continuous dynamics with discrete events and includes the operating constraints.This feature of MLD modeling is very advantageous when an MPC controller synthesis for the HDSs is designed.Once the MLD model of the system is well-posed,then the MPC law synthesis can be developed based on the Mixed Integer Programming(MIP)optimization problem.For solving this MIP problem,a Branch and Bound(B&B)algorithm is proposed to determine the optimal control inputs.Then,a comparative study is carried out to illustrate the effectiveness of the proposed hybrid controller for the HDSs compared to the standard MPC approach.Performances results show that the MLD-MPC approach outperforms the standardMPCone that doesn’t consider the hybrid aspect of the system.The paper also shows a behavioral test of the MLDMPC controller against disturbances deemed as liquid leaks from the system.The results are very satisfactory and show that the tracking error is minimal less than 0.1%in nominal conditions and less than 0.6%in the presence of disturbances.Such results confirm the success of the MLD-MPC approach for the control of the HDSs. 展开更多
关键词 Hybrid dynamic system model predictive control mixed logical dynamical model mixed integer programming three-tank hybrid system
在线阅读 下载PDF
牵引整流器单管IGBT开路故障诊断
15
作者 党忆涵 徐传芳 王绍祖 《电机与控制应用》 2025年第3期294-304,共11页
【目的】牵引整流器与牵引逆变器是列车牵引变流器的重要组成部分,牵引整流器主要由绝缘栅双极晶体管(IGBT)、谐振电路以及直流侧电容等部件组成,其故障频率高于牵引逆变器,且IGBT发生开路故障时不会引发大幅过电流或过电压等明显现象,... 【目的】牵引整流器与牵引逆变器是列车牵引变流器的重要组成部分,牵引整流器主要由绝缘栅双极晶体管(IGBT)、谐振电路以及直流侧电容等部件组成,其故障频率高于牵引逆变器,且IGBT发生开路故障时不会引发大幅过电流或过电压等明显现象,诊断和保护相对较难。为此,本文提出了一种基于混合逻辑动态(MLD)模型与自适应阈值的牵引整流器IGBT开路故障诊断算法。【方法】首先,在阐述牵引整流器工作原理的基础上,建立了牵引整流器的MLD模型并估计网侧电流。然后,对单管IGBT开路故障时网侧电流实际值与估计值之间的残差进行了分析。最后,设计自适应阈值进行故障诊断,并依据自适应阈值的变化区分IGBT发生开路故障的位置,进而提出基于MLD模型与自适应阈值的牵引整流器IGBT开路故障诊断算法,实现IGBT的开路故障诊断与定位。【结果】基于Matlab/Simulink平台建立MLD模型并引入自适应阈值对所提算法的有效性进行仿真验证。仿真结果表明该故障诊断方法能够在几百微秒内检测到IGBT发生开路故障,并能够准确定位到开路IGBT,且存在外界干扰时,不会产生误诊断。【结论】基于MLD模型与自适应阈值的IGBT开路故障诊断算法能够快速检测并定位到故障IGBT。与传统MLD故障诊断算法相比,所提算法能够有效解决不同IGBT开路时的阈值选择问题,且故障诊断精度高,对外界干扰具有很强的鲁棒性。 展开更多
关键词 牵引整流器 绝缘栅双极晶体管开路故障 混合逻辑动态模型 自适应阈值 故障诊断
在线阅读 下载PDF
基于状态观测器的单相整流系统传感器故障诊断与容错控制方法 被引量:17
16
作者 苟斌 蒲俊楷 +1 位作者 葛兴来 冯晓云 《铁道学报》 EI CAS CSCD 北大核心 2017年第2期44-51,共8页
交直交传动系统广泛应用于高速铁路牵引领域。电力牵引变流器作为牵引传动系统核心部件,由于其自身结构复杂,且运行环境恶劣,易突发故障。本文针对牵引变流器脉冲整流器网侧电流传感器和中间直流侧电压传感器故障,通过建立单相脉冲整流... 交直交传动系统广泛应用于高速铁路牵引领域。电力牵引变流器作为牵引传动系统核心部件,由于其自身结构复杂,且运行环境恶劣,易突发故障。本文针对牵引变流器脉冲整流器网侧电流传感器和中间直流侧电压传感器故障,通过建立单相脉冲整流器混合逻辑动态MLD(Mixed Logic Dynamic)模型,构建系统状态观测器,研究基于状态观测器的传感器在线故障诊断与容错控制方法,并基于RT-LAB在回路试验平台进行了验证。试验结果验证了该方法的有效性,其具有诊断速度快、精度高的特点,适用于电力牵引传动系统应用。 展开更多
关键词 状态观测器 单相脉冲整流器传感器 故障诊断与容错控制 混合逻辑动态模型
在线阅读 下载PDF
混杂系统理论及其在三相逆变电路开路故障诊断中的应用 被引量:23
17
作者 李宁 李颖晖 +2 位作者 朱喜华 雷洪利 俞佳 《电工技术学报》 EI CSCD 北大核心 2014年第6期114-119,共6页
针对基于事件辨识的故障诊断方法难以用于离散事件较多的电力电子电路这一问题,文章建立了电力电子电路的混合逻辑动态模型,将电路运行抽象为离散事件的变迁,并根据电路的故障模式确定电路的故障事件集和故障模型。文章应用了故障事件... 针对基于事件辨识的故障诊断方法难以用于离散事件较多的电力电子电路这一问题,文章建立了电力电子电路的混合逻辑动态模型,将电路运行抽象为离散事件的变迁,并根据电路的故障模式确定电路的故障事件集和故障模型。文章应用了故障事件识别向量的概念,基于电路的故障模型仅通过对电路故障事件的辨识实现故障诊断,具有实现简单、通用性好、诊断效果可靠的优点,以逆变电路故障诊断的仿真和实验验证了所提方法的可行性和有效性。 展开更多
关键词 逆变器 混合逻辑动态建模 故障事件识别向量 故障诊断
在线阅读 下载PDF
基于混合逻辑动态模型的三相逆变电路有限控制集模型预测控制策略 被引量:24
18
作者 李宁 李颖晖 +1 位作者 韩建定 朱喜华 《电网技术》 EI CSCD 北大核心 2014年第2期375-380,共6页
逆变电路传统开关函数模型只能描述电路的控制变迁而忽略了电路的条件变迁,为此,建立了三相逆变电路混合逻辑动态(mixed logical dynamical,MLD)模型。在此基础上,将其作为预测模型,提出了电路的有限控制集模型预测控制(finite control ... 逆变电路传统开关函数模型只能描述电路的控制变迁而忽略了电路的条件变迁,为此,建立了三相逆变电路混合逻辑动态(mixed logical dynamical,MLD)模型。在此基础上,将其作为预测模型,提出了电路的有限控制集模型预测控制(finite control set model predictive control,FCS-MPC)策略。FCS-MPC充分考虑了电路的离散特性,选择有限控制集中使目标函数值最小的开关状态作为电路开关管的控制信号,从而控制电路的输出电压,无需任何调制器,可简化MPC的优化问题。此外,基于全维状态观测器设计了电路负载电流观测器,增强了控制器的鲁棒性。仿真和实验结果验证了所提方法的有效性。 展开更多
关键词 逆变电路 混合逻辑动态模型 模型预测控制 状态观测器 有限控制集模型预测控制
原文传递
DC/AC变换器的混杂系统建模及预测控制 被引量:26
19
作者 郑雪生 李春文 戎袁杰 《电工技术学报》 EI CSCD 北大核心 2009年第7期87-92,共6页
DC/AC变换器是典型的混杂系统,分析了变换器的动态特点和系统所受的约束及控制目标。在建模中为了考虑开关动态将PWM周期进行细分,通过引入逻辑变量来判断各个子区间的开关状态从而确定系统的动态演化方程。用混杂系统语言编辑工具HYSDE... DC/AC变换器是典型的混杂系统,分析了变换器的动态特点和系统所受的约束及控制目标。在建模中为了考虑开关动态将PWM周期进行细分,通过引入逻辑变量来判断各个子区间的开关状态从而确定系统的动态演化方程。用混杂系统语言编辑工具HYSDEL对系统进行描述得到混合逻辑动态模型,基于模型设计预测控制器,通过在线求解对应的混合整数规划问题得到数值解。仿真结果验证了模型建立的正确性和控制器设计的有效性。 展开更多
关键词 DC/AC变换器 混合逻辑动态 模型预测控制
在线阅读 下载PDF
三相逆变电路的离线模型预测控制研究 被引量:8
20
作者 韩建定 齐蓉 +1 位作者 雷晓犇 张东升 《电工技术学报》 EI CSCD 北大核心 2016年第15期163-169,共7页
针对电力电子电路传统开关函数模型只描述电路的控制变迁而忽略了电路的条件变迁,可能导致电路动态信息丢失这一问题,建立了电力电子电路的混合逻辑动态模型,并将其作为预测模型。在此基础上,以电路可行解代替最优解,将可行解及移动闭... 针对电力电子电路传统开关函数模型只描述电路的控制变迁而忽略了电路的条件变迁,可能导致电路动态信息丢失这一问题,建立了电力电子电路的混合逻辑动态模型,并将其作为预测模型。在此基础上,以电路可行解代替最优解,将可行解及移动闭塞的思想用于电路的模型预测控制(MPC),可有效减少控制序列总数、降低开关频率,实现电路MPC的快速求解,克服了电路MPC的计算难题。详细研究了电力电子电路控制序列的求解算法及实现过程,并以三相逆变电路为例验证了控制方法的可行性与有效性。 展开更多
关键词 模型预测控制 混合逻辑动态建模 逆变电路 可行解 移动闭塞
在线阅读 下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部