The serrated plastic flow,microstructure and residual stress of a Zr_（55）Cu_（30）Ni_5Al_（10） bulk metallic glass（BMG）undergone surface mechanical attrition treatment（SMAT）have been investigated by a combinati...The serrated plastic flow,microstructure and residual stress of a Zr_（55）Cu_（30）Ni_5Al_（10） bulk metallic glass（BMG）undergone surface mechanical attrition treatment（SMAT）have been investigated by a combination of compression tests with scanning electron microscopy（SEM）,high resolution transmission electron microscopy（HRTEM）and the incremental hole-drilling strain-gage method.It is found that SMAT leads to various microstructural modifications and residual stress distribution in the surface layers of the Zrbased BMG due to the mechanically-induced nanocrystallization and generation of shear bands.As a result,the BMG alloy exhibits a remarkable work-hardening like behavior and significant increase of plastic strain from less than 1%to 15%,and its plastic deformation dynamics yields a power-law distribution of shear avalanches.Based upon the analysis of the experimental results,it is indicated that this can be connected to the SMAT-induced microstructural modifications and the resulting residual compressive stress in the Zr-based BMG.展开更多
A novel dual-rotation bobbin tool friction stir welding （DBT-FSW） was developed, in which the upper shoulder （US） and lower shoulder （LS） have different rotational speeds. This process was tried to weld 3.2 mm t...A novel dual-rotation bobbin tool friction stir welding （DBT-FSW） was developed, in which the upper shoulder （US） and lower shoulder （LS） have different rotational speeds. This process was tried to weld 3.2 mm thick alunlinum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formabiliW. Experimental results show that compared to conven- tional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.展开更多
基金the financial supports provided by National Natural Science Foundation of China(Grant Nos.51171099,50871063)the MOST 973 Program of China(Grant Nos.2015CB856800 and 2012CB932203)
文摘The serrated plastic flow,microstructure and residual stress of a Zr_（55）Cu_（30）Ni_5Al_（10） bulk metallic glass（BMG）undergone surface mechanical attrition treatment（SMAT）have been investigated by a combination of compression tests with scanning electron microscopy（SEM）,high resolution transmission electron microscopy（HRTEM）and the incremental hole-drilling strain-gage method.It is found that SMAT leads to various microstructural modifications and residual stress distribution in the surface layers of the Zrbased BMG due to the mechanically-induced nanocrystallization and generation of shear bands.As a result,the BMG alloy exhibits a remarkable work-hardening like behavior and significant increase of plastic strain from less than 1%to 15%,and its plastic deformation dynamics yields a power-law distribution of shear avalanches.Based upon the analysis of the experimental results,it is indicated that this can be connected to the SMAT-induced microstructural modifications and the resulting residual compressive stress in the Zr-based BMG.
基金support of the National Natural Science Foundation of China(No.51705027)the fund of the State Key Laboratory of Solidification Processing in NWPU(No.SKLSP201722)
文摘A novel dual-rotation bobbin tool friction stir welding （DBT-FSW） was developed, in which the upper shoulder （US） and lower shoulder （LS） have different rotational speeds. This process was tried to weld 3.2 mm thick alunlinum-lithium alloy sheets. The metallographic analysis and torque measurement were carried out to characterize the weld formabiliW. Experimental results show that compared to conven- tional bobbin tool friction stir welding, the DBT-FSW has an excellent process stability, and can produce the defect-free joints in a wider range of welding parameters. These can be attributed to the significant improvement of material flow caused by the formation of a staggered layer structure and the unbalanced force between the US and LS during the DBT-FSW process.
