Microstructure evolution and the changes in mechanical properties of HR3 Csteel during long-term aging at650,700 and 750℃ were investigated.The precipitated phases of the aging steel included M23C6 carbides,Z-phase a...Microstructure evolution and the changes in mechanical properties of HR3 Csteel during long-term aging at650,700 and 750℃ were investigated.The precipitated phases of the aging steel included M23C6 carbides,Z-phase and a trace amount of Nb（C,N）.The M23C6 carbides were distributed mainly at the grain boundary,while Z-phase was mainly inside the grains.Amounts of both M23C6 carbides and Z-phase during the aging process increased with increasing aging period and temperature.Coarsening of M23C6 carbides was influenced significantly by aging time and temperature,while the size of the Z-phase was relatively less affected by the aging time and temperature,which had a steady strengthening effect.Coarsening of the M23C6 carbides was the main reason for the decline in high temperature yield strength during long-term aging at 750℃.The M23C6 carbides were linked into a continuous chain along the grain boundary which accounted for the decrease of toughness during aging.展开更多
Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that,...Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.展开更多
Through molecular dynamics（MD） simulation, the dependencies of temperature, grain size and strain rate on the mechanical properties were studied. The simulation results demonstrated that the strain rate from 0.05 to...Through molecular dynamics（MD） simulation, the dependencies of temperature, grain size and strain rate on the mechanical properties were studied. The simulation results demonstrated that the strain rate from 0.05 to 2 ns–1 affected the Young＇s modulus of nickel nanowires slightly, whereas the yield stress increased. The Young＇s modulus decreased approximately linearly; however, the yield stress firstly increased and subsequently dropped as the temperature increased. The Young＇s modulus and yield stress increased as the mean grain size increased from 2.66 to 6.72 nm. Moreover, certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension. Certain phenomena such as the formation of twin structures, which were found in nanowires with larger grain size at higher strain rate and lower temperature, as well as the movement of grain boundaries and dislocation, were detected and discussed in detail. The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size. However, for larger grain size, the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.展开更多
Reaction-bonded B_(4)C–SiC composites are highly promising materials for numerous advanced technological applications.However,their microstructure evolution mechanism remains unclear.Herein,B_(4)C–SiC composites wer...Reaction-bonded B_(4)C–SiC composites are highly promising materials for numerous advanced technological applications.However,their microstructure evolution mechanism remains unclear.Herein,B_(4)C–SiC composites were fabricated through the Si-melt infiltration process.The influences of the sintering time and the B_(4)C content on the mechanical properties,microstructure,and phase evolution were investigated.X-ray diffraction results showed the presence of SiC,boron silicon,boron silicon carbide,and boron carbide.Scanning electron microscopy results showed that with the increase in the boron carbide content,the Si content decreased and the unreacted B_(4)C amount increased when the sintering temperature reached 1650°C and the sintering time reached 1 h.The unreacted B_(4)C diminished with increasing sintering time and temperature when B_(4)C content was lower than 35wt%.Further microstructure analysis showed a transition area between B_(4)C and Si,with the C content marginally higher than in the Si area.This indicates that after the silicon infiltration,the diffusion mechanism was the primary sintering mechanism of the composites.As the diffusion process progressed,the hardness increased.The maximum values of the Vickers hardness,flexural strength,and fracture toughness of the reaction-bonded B_(4)C–SiC ceramic composite with 12wt%B_(4)C content sintered at 1600°C for 0.5 h were about HV 2400,330 MPa,and 5.2 MPa·m^(0.5),respectively.展开更多
The effects of the heating process and hot extrusion on the microstructure and properties of inconel 625 alloy were studied. The experimental results showed that the properties of Inconel 625 alloy could be improved t...The effects of the heating process and hot extrusion on the microstructure and properties of inconel 625 alloy were studied. The experimental results showed that the properties of Inconel 625 alloy could be improved through the heating process and hot extrusion concomitant with a reduced corrosion rate. The M23C6 carbide, generated in the heating process, was retained and distributed at the grain boundary during the process of hot extrusion, which had an important influence on both elongation and corrosion resistance. The improvement of the comprehensive properties of the material, as measured by a tensile test at room temperature, was correlated with the dissolution of segregation Nb. A typical ductile fracture changed to a cleavage fracture where secondary cracks could be clearly seen. With the increase of the extrusion ratio, the real extrusion temperature was higher, which led to more dissolution of the M23C6 carbide, decreased the number of secondary cracks, enhanced the effect of solid solution strengthening, and reduced the intergranular corrosion rate. Under the condition of a high extrusion ratio and a high extrusion speed, the less extrusion time made it possible to obtain organization with a smaller average grain size. Moreover, in this case, the M23C6 carbide and segregated Nb did not have enough time to diffuse. Thus all samples exhibited medium strengths and corrosion rates after extrusion.展开更多
To investigate the formation mechanism of calcium hexaluminate（CaAl_（12）O_（19）, CA_6）, the analytically pure alumina and calcia used as raw materials were mixed in CaO/Al_2O_3 ratio of 12.57：137.43 by mass. The...To investigate the formation mechanism of calcium hexaluminate（CaAl_（12）O_（19）, CA_6）, the analytically pure alumina and calcia used as raw materials were mixed in CaO/Al_2O_3 ratio of 12.57：137.43 by mass. The raw materials were ball-milled and shaped into green specimens, and fired at 1300-1600°C. Then, the phase composition and microstructure evolution of the fired specimen were studied, and a first principle calculation was performed. The results show that in the reaction system of CaO and Al_2O_3, a small amount of CA_6 forms at 1300°C, and greater amounts are formed at 1400°C and higher temperatures. The reaction is as follows： CaO ·2Al_2O_3（CA_2） ＋ 4Al_2O_3 → CA_6. The diffusions of Ca^（2＋） in CA_2 towards Al_2O_3 and Al^（3＋） in Al_2O_3 towards CA_2 change the structures in different degrees of difficulty. Compared with the difficulty of structural change and the corresponding lattice energy change, it is deduced that the main formation mechanism is the diffusion of Ca^（2＋） in CA_2 towards Al_2O_3.展开更多
High-entropy alloys(HEAs)exhibit exceptional mechanical properties under cryogenic conditions,defying the conventional strength-ductility trade-off observed in traditional metal.This review systematically consolidates...High-entropy alloys(HEAs)exhibit exceptional mechanical properties under cryogenic conditions,defying the conventional strength-ductility trade-off observed in traditional metal.This review systematically consolidates recent advancements in understanding the deformation mechanisms,microstructural dynamics,and anomalous mechanical responses of HEAs at cryogenic temperatures.Central to their performance is the synergy among deformation twinning,dislocation slip,stacking fault formation,and phase transformations,aided by the temperature-dependent stacking fault energy and complex internal stress fields.Notably,HEAs exhibit a unique strain-hardening behavior and fracture toughness enhancement at low temperatures,attributed to the activation of hierarchical twins and dynamic competition between slip modes.The serrated flow phenomenon,characterized by intermittent stress fluctuations during plastic deformation,reflects the interplay of local phase instabilities and defect interactions.Critically,the suppression of atomic diffusion and stabilization of metastable phases under cryogenic conditions contribute to structural integrity and postponed damage accumulation.This work highlights the transformative potential of HEAs in cryogenic engineering applications(e.g.,aerospace and deep-sea systems)and identifies knowledge gaps,such as the origin of strain localization and the role of multi-scale defects in fracture resistance.Future research directions include advanced in situ characterization,multi-physics modeling,and the design of novel HEA compositions tailored for extreme environments.展开更多
基金Item Sponsored by National High-Tech Research and Development Program(863Program)of China(2012AA03A501)International Science and Technology Cooperation Program of China(2012DFG51670)
文摘Microstructure evolution and the changes in mechanical properties of HR3 Csteel during long-term aging at650,700 and 750℃ were investigated.The precipitated phases of the aging steel included M23C6 carbides,Z-phase and a trace amount of Nb（C,N）.The M23C6 carbides were distributed mainly at the grain boundary,while Z-phase was mainly inside the grains.Amounts of both M23C6 carbides and Z-phase during the aging process increased with increasing aging period and temperature.Coarsening of M23C6 carbides was influenced significantly by aging time and temperature,while the size of the Z-phase was relatively less affected by the aging time and temperature,which had a steady strengthening effect.Coarsening of the M23C6 carbides was the main reason for the decline in high temperature yield strength during long-term aging at 750℃.The M23C6 carbides were linked into a continuous chain along the grain boundary which accounted for the decrease of toughness during aging.
文摘Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.
基金Supported by the National Natural Science Foundation of China(11102139,11472195)the Natural Science Foundation of Hubei Province of China(2014CFB713)
文摘Through molecular dynamics（MD） simulation, the dependencies of temperature, grain size and strain rate on the mechanical properties were studied. The simulation results demonstrated that the strain rate from 0.05 to 2 ns–1 affected the Young＇s modulus of nickel nanowires slightly, whereas the yield stress increased. The Young＇s modulus decreased approximately linearly; however, the yield stress firstly increased and subsequently dropped as the temperature increased. The Young＇s modulus and yield stress increased as the mean grain size increased from 2.66 to 6.72 nm. Moreover, certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension. Certain phenomena such as the formation of twin structures, which were found in nanowires with larger grain size at higher strain rate and lower temperature, as well as the movement of grain boundaries and dislocation, were detected and discussed in detail. The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size. However, for larger grain size, the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.
基金financially supported by the National Natural Science Foundation of China(No.51875222)the China Postdoctoral Science Foundation(No.2017M622426)+1 种基金the First Class Special Funding for Postdoctoral Scientific Research of Hubei Province,China(No.2017-G3)the Opening Fund of State key laboratory for Environmentfriendly Energy Materials(No.17kffk 12)。
文摘Reaction-bonded B_(4)C–SiC composites are highly promising materials for numerous advanced technological applications.However,their microstructure evolution mechanism remains unclear.Herein,B_(4)C–SiC composites were fabricated through the Si-melt infiltration process.The influences of the sintering time and the B_(4)C content on the mechanical properties,microstructure,and phase evolution were investigated.X-ray diffraction results showed the presence of SiC,boron silicon,boron silicon carbide,and boron carbide.Scanning electron microscopy results showed that with the increase in the boron carbide content,the Si content decreased and the unreacted B_(4)C amount increased when the sintering temperature reached 1650°C and the sintering time reached 1 h.The unreacted B_(4)C diminished with increasing sintering time and temperature when B_(4)C content was lower than 35wt%.Further microstructure analysis showed a transition area between B_(4)C and Si,with the C content marginally higher than in the Si area.This indicates that after the silicon infiltration,the diffusion mechanism was the primary sintering mechanism of the composites.As the diffusion process progressed,the hardness increased.The maximum values of the Vickers hardness,flexural strength,and fracture toughness of the reaction-bonded B_(4)C–SiC ceramic composite with 12wt%B_(4)C content sintered at 1600°C for 0.5 h were about HV 2400,330 MPa,and 5.2 MPa·m^(0.5),respectively.
基金Funded by the National Natural Science Foundation of China(Nos.51664041 and 51365029)the Gansu Science and Technology Support Program-industrial Category(No.1604GKCA038)+1 种基金the Fundamental Research Funds for the Universities in Gansu Provincethe Program for Major Projects of Science and Technology in Gansu Province(No.145RTSA004)
文摘The effects of the heating process and hot extrusion on the microstructure and properties of inconel 625 alloy were studied. The experimental results showed that the properties of Inconel 625 alloy could be improved through the heating process and hot extrusion concomitant with a reduced corrosion rate. The M23C6 carbide, generated in the heating process, was retained and distributed at the grain boundary during the process of hot extrusion, which had an important influence on both elongation and corrosion resistance. The improvement of the comprehensive properties of the material, as measured by a tensile test at room temperature, was correlated with the dissolution of segregation Nb. A typical ductile fracture changed to a cleavage fracture where secondary cracks could be clearly seen. With the increase of the extrusion ratio, the real extrusion temperature was higher, which led to more dissolution of the M23C6 carbide, decreased the number of secondary cracks, enhanced the effect of solid solution strengthening, and reduced the intergranular corrosion rate. Under the condition of a high extrusion ratio and a high extrusion speed, the less extrusion time made it possible to obtain organization with a smaller average grain size. Moreover, in this case, the M23C6 carbide and segregated Nb did not have enough time to diffuse. Thus all samples exhibited medium strengths and corrosion rates after extrusion.
基金financially supported by the National Nature Science Foundation of China(No.51172120)
文摘To investigate the formation mechanism of calcium hexaluminate（CaAl_（12）O_（19）, CA_6）, the analytically pure alumina and calcia used as raw materials were mixed in CaO/Al_2O_3 ratio of 12.57：137.43 by mass. The raw materials were ball-milled and shaped into green specimens, and fired at 1300-1600°C. Then, the phase composition and microstructure evolution of the fired specimen were studied, and a first principle calculation was performed. The results show that in the reaction system of CaO and Al_2O_3, a small amount of CA_6 forms at 1300°C, and greater amounts are formed at 1400°C and higher temperatures. The reaction is as follows： CaO ·2Al_2O_3（CA_2） ＋ 4Al_2O_3 → CA_6. The diffusions of Ca^（2＋） in CA_2 towards Al_2O_3 and Al^（3＋） in Al_2O_3 towards CA_2 change the structures in different degrees of difficulty. Compared with the difficulty of structural change and the corresponding lattice energy change, it is deduced that the main formation mechanism is the diffusion of Ca^（2＋） in CA_2 towards Al_2O_3.
文摘High-entropy alloys(HEAs)exhibit exceptional mechanical properties under cryogenic conditions,defying the conventional strength-ductility trade-off observed in traditional metal.This review systematically consolidates recent advancements in understanding the deformation mechanisms,microstructural dynamics,and anomalous mechanical responses of HEAs at cryogenic temperatures.Central to their performance is the synergy among deformation twinning,dislocation slip,stacking fault formation,and phase transformations,aided by the temperature-dependent stacking fault energy and complex internal stress fields.Notably,HEAs exhibit a unique strain-hardening behavior and fracture toughness enhancement at low temperatures,attributed to the activation of hierarchical twins and dynamic competition between slip modes.The serrated flow phenomenon,characterized by intermittent stress fluctuations during plastic deformation,reflects the interplay of local phase instabilities and defect interactions.Critically,the suppression of atomic diffusion and stabilization of metastable phases under cryogenic conditions contribute to structural integrity and postponed damage accumulation.This work highlights the transformative potential of HEAs in cryogenic engineering applications(e.g.,aerospace and deep-sea systems)and identifies knowledge gaps,such as the origin of strain localization and the role of multi-scale defects in fracture resistance.Future research directions include advanced in situ characterization,multi-physics modeling,and the design of novel HEA compositions tailored for extreme environments.
