The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters we...The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters were maintained constant throughout the experiments.Results indicate that the heat treatment at 1150℃for 10 h is the optimal homogenization condition.Following this optimal treatment,dendrite structures and element segregation are eliminated.Furthermore,both SiC and Y_(5)Si_(3)precipitates in the as-cast alloy decrease significantly.Conversely,the homogenization at 1188℃induces overheating defects within the alloy.Although SiC and Y_(5)Si_(3)phases also decrease,some large M6C phases can still be observed,adversely affecting subsequent forging processes.展开更多
To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator a...To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.展开更多
Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate indiv...Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,cry...In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,crystallization behaviours and mechanical properties were investigated.FTIR,Raman spectroscopy and nuclear magnetic resonance spectroscopy microstructure analysis showed that the silico-oxygen network was damaged,while the increase of[AlO_(4)]content repaired the glass network,and finally made the glass network have better connectivity,with the decrease of SiO_(2).The thermal analysis confirmed the increasing glass transition and crystallization temperatures from growing Al_(2)O_(3)content.In addition,different crystal phases can be precipitated in the glass matrix,such as LiAlSi_(4)O_(10),Li_(2)Si_(2)O_(5) in glass with low Al_(2)O_(3)content,the combination of Li_xAl_xSi_(1-x)O_(2),LiAlSi_(3)O_(8),Li_(2)SiO_(3)in glass with intermediate Al_(2)O_(3)content,and the combination of LiAlSi_(2)O_(6),SiO_(2)in glass with high Al_(2)O_(3)content.The hardness of as-prepared glass gradually increases with the increase of the Al_(2)O_(3)content.The Vickers hardness of the glass-ceramics is highly dependent on the Al_(2)O_(3)content in the glass and the heat treatment temperatures,reaching a maximum of 10.11 GPa.Scanning electron microscope images show that the crystals change from spherical to massive and finally to sheet.The change of glass structure,crystal phase and morphology is the main reason for the different mechanical properties.展开更多
Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,th...Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,the dispersion of inclusions,carbides,and microstructure refinement in steel have emerged as one of the key research directions in the development of high-quality steel.The current research status regarding the regulation of inclusions,carbides,and microstructures in steel through heterogeneous nucleation are reviewed.The key points and challenges in refining the second phase and microstructure in steel using inclusion particles are highlighted,aiming to provide inspiration and references for future scholars.Deoxidized inclusions,when refined and dispersed,exhibit favorable lattice matching with second phases(e.g.,nitrides,sulfides,carbides)in steel.This characteristic serves as the fundamental mechanism for achieving refinement of the second phase.Concurrently,the solid-solution alloying effect from deoxidizing metals contributes to second-phase refinement,an aspect that requires prioritized investigation.In addition to the single heterogeneous nucleation refinement effect,the two-stage heterogeneous nucleation refinement of the second phase and microstructure offers a new approach for follow-up research.Notably,second-phase particles added as heterogeneous nucleation sites via external addition often require surface modification to ensure their stable retention in steel at high temperatures,which remains a major challenge restricting the widespread application of this method.Currently,the explanation of heterogeneous nucleation phenomena primarily relies on empirical calculations of lattice mismatch between the substrate and the nucleating phase,which cannot fully elucidate the quantitative relationship on the interface between the substrate and the nucleation phase.On this basis,quantifying the electronic structure and nucleation barrier at the interface between the substrate and the nucleation phase is a critical direction worthy of increased attention in the future.展开更多
A deep-undercooling rapid-solidification technique combining cyclic superheating and molten glass purification was employed to successfully prepare Cu60Ni40 and Cu65Ni35 alloys at various undercooling levels.Furthermo...A deep-undercooling rapid-solidification technique combining cyclic superheating and molten glass purification was employed to successfully prepare Cu60Ni40 and Cu65Ni35 alloys at various undercooling levels.Furthermore,through precise compositional regulation by adjusting the Cu content and introducing Co,the Cu60Ni35Co5 alloy was obtained.The morphological evolution of the solidification front and the variation in solidification rate with undercooling were systematically investigated.By combining metallographic analysis,the BCT model,electron backscatter diffraction(EBSD),and transmission electron microscopy(TEM),the microstructural evolution and grain refinement mechanisms of the undercooled alloys were revealed.This work aims to establish the intrinsic relationship among undercooling,solidification behavior,and microstructure,thereby provides both experimental and theoretical foundations for a deeper understanding of the deep undercooling solidification mechanism and microstructural control.展开更多
Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic ...Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.展开更多
The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepar...The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.展开更多
Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subje...Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subjective,while fully supervised deep learning approaches require extensive and expensive pixel-level annotated data.Furthermore,existing semi-supervised methods still face challenges in handling the adhesion of adjacent primary silicon particles and effectively utilizing consistency in unlabeled data.To address these issues,this paper proposes a novel semi-supervised framework for Al-Si alloy microstructure image segmentation.First,we introduce a Rotational Uncertainty Correction Strategy(RUCS).This strategy employs multi-angle rotational perturbations andMonte Carlo sampling to assess prediction consistency,generating a pixel-wise confidence weight map.By integrating this map into the loss function,the model dynamically focuses on high-confidence regions,thereby improving generalization ability while reducing manual annotation pressure.Second,we design a Boundary EnhancementModule(BEM)to strengthen boundary feature extraction through erosion difference and multi-scale dilated convolutions.This module guides the model to focus on the boundary regions of adjacent particles,effectively resolving particle adhesion and improving segmentation accuracy.Systematic experiments were conducted on the Aluminum-Silicon Alloy Microstructure Dataset(ASAD).Results indicate that the proposed method performs exceptionally well with scarce labeled data.Specifically,using only 5%labeled data,our method improves the Jaccard index and Adjusted Rand Index(ARI)by 2.84 and 1.57 percentage points,respectively,and reduces the Variation of Information(VI)by 8.65 compared to stateof-the-art semi-supervised models,approaching the performance levels of 10%labeled data.These results demonstrate that the proposed method significantly enhances the accuracy and robustness of quantitative microstructure analysis while reducing annotation costs.展开更多
The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-lear...The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.展开更多
The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(...The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.展开更多
The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected trans...The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.展开更多
Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic ...Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic casting is challenging owing to defects such as RE oxides and shrinkage porosity,making fusion welding essential for both defect repair and structural joining.This review comprehensively examines recent advances in fusion welding of Mg-RE alloys,with emphasis on the interplay between their unique physicochemical properties and welding metallurgy.Various fusion welding methods suitable for Mg-RE alloys are compared and analyzed.Detailed characterization of joint regions reveals how thermal gradients and cooling rates govern phase evolution,grain morphology,and defect formation.Moreover,welding parameters and heat treatment strategies are systematically discussed for the microstructural configuration,especially for the inherent conflicts between grain coarsening in fusion zone and eutectic dissolution in heat-affected zone.Future research directions are also outlined.By correlating Mg-RE alloy properties with fusion welding processes,this review provides practical insights for designing reliable welded structures in critical applications.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and propertie...The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.展开更多
The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu...The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.展开更多
Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to ...Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of re...Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.展开更多
基金National Natural Science Foundation of China(51801227,52071331)。
文摘The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters were maintained constant throughout the experiments.Results indicate that the heat treatment at 1150℃for 10 h is the optimal homogenization condition.Following this optimal treatment,dendrite structures and element segregation are eliminated.Furthermore,both SiC and Y_(5)Si_(3)precipitates in the as-cast alloy decrease significantly.Conversely,the homogenization at 1188℃induces overheating defects within the alloy.Although SiC and Y_(5)Si_(3)phases also decrease,some large M6C phases can still be observed,adversely affecting subsequent forging processes.
文摘To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.
基金National Natural Science Foundation of China(52172108)National Key R&D Program of China(2022YFB3707700)Strategic Priority Research Program of the Chinese Academy of Sciences(XDC0144005)。
文摘Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
基金Funded by the National Key Research Program(No.2024-1129-954-112)National Natural Science Foundation of China(No.52372033)Guangxi Science and Technology Major Program(No.AA24263054)。
文摘In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,crystallization behaviours and mechanical properties were investigated.FTIR,Raman spectroscopy and nuclear magnetic resonance spectroscopy microstructure analysis showed that the silico-oxygen network was damaged,while the increase of[AlO_(4)]content repaired the glass network,and finally made the glass network have better connectivity,with the decrease of SiO_(2).The thermal analysis confirmed the increasing glass transition and crystallization temperatures from growing Al_(2)O_(3)content.In addition,different crystal phases can be precipitated in the glass matrix,such as LiAlSi_(4)O_(10),Li_(2)Si_(2)O_(5) in glass with low Al_(2)O_(3)content,the combination of Li_xAl_xSi_(1-x)O_(2),LiAlSi_(3)O_(8),Li_(2)SiO_(3)in glass with intermediate Al_(2)O_(3)content,and the combination of LiAlSi_(2)O_(6),SiO_(2)in glass with high Al_(2)O_(3)content.The hardness of as-prepared glass gradually increases with the increase of the Al_(2)O_(3)content.The Vickers hardness of the glass-ceramics is highly dependent on the Al_(2)O_(3)content in the glass and the heat treatment temperatures,reaching a maximum of 10.11 GPa.Scanning electron microscope images show that the crystals change from spherical to massive and finally to sheet.The change of glass structure,crystal phase and morphology is the main reason for the different mechanical properties.
基金supported by the National Natural Science Foundation of China(No.52304358)Young Elite Scientists Sponsorship Program by CAST(No.YESS20230462).
文摘Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,the dispersion of inclusions,carbides,and microstructure refinement in steel have emerged as one of the key research directions in the development of high-quality steel.The current research status regarding the regulation of inclusions,carbides,and microstructures in steel through heterogeneous nucleation are reviewed.The key points and challenges in refining the second phase and microstructure in steel using inclusion particles are highlighted,aiming to provide inspiration and references for future scholars.Deoxidized inclusions,when refined and dispersed,exhibit favorable lattice matching with second phases(e.g.,nitrides,sulfides,carbides)in steel.This characteristic serves as the fundamental mechanism for achieving refinement of the second phase.Concurrently,the solid-solution alloying effect from deoxidizing metals contributes to second-phase refinement,an aspect that requires prioritized investigation.In addition to the single heterogeneous nucleation refinement effect,the two-stage heterogeneous nucleation refinement of the second phase and microstructure offers a new approach for follow-up research.Notably,second-phase particles added as heterogeneous nucleation sites via external addition often require surface modification to ensure their stable retention in steel at high temperatures,which remains a major challenge restricting the widespread application of this method.Currently,the explanation of heterogeneous nucleation phenomena primarily relies on empirical calculations of lattice mismatch between the substrate and the nucleating phase,which cannot fully elucidate the quantitative relationship on the interface between the substrate and the nucleation phase.On this basis,quantifying the electronic structure and nucleation barrier at the interface between the substrate and the nucleation phase is a critical direction worthy of increased attention in the future.
基金Funded by the Central Government-Guided Local Development Fund Project(No.YDZJSX2025D042)the Key R&D Program of Shanxi Province(No.202202150401018)+1 种基金the Basic Research Program of Shanxi Province(No.202503021211112)the State Key Laboratory of CAD/CG of Zhejiang University(No.A2325)。
文摘A deep-undercooling rapid-solidification technique combining cyclic superheating and molten glass purification was employed to successfully prepare Cu60Ni40 and Cu65Ni35 alloys at various undercooling levels.Furthermore,through precise compositional regulation by adjusting the Cu content and introducing Co,the Cu60Ni35Co5 alloy was obtained.The morphological evolution of the solidification front and the variation in solidification rate with undercooling were systematically investigated.By combining metallographic analysis,the BCT model,electron backscatter diffraction(EBSD),and transmission electron microscopy(TEM),the microstructural evolution and grain refinement mechanisms of the undercooled alloys were revealed.This work aims to establish the intrinsic relationship among undercooling,solidification behavior,and microstructure,thereby provides both experimental and theoretical foundations for a deeper understanding of the deep undercooling solidification mechanism and microstructural control.
基金financially and technically supported by the National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact,Beijing Institute of Technology,China(No.WDZC2024-1)。
文摘Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the National Natural Science Foundation of China(Nos.52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship·Program by CAST(No.2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.
基金funded by the National Natural Science Foundation of China (52061020).
文摘Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subjective,while fully supervised deep learning approaches require extensive and expensive pixel-level annotated data.Furthermore,existing semi-supervised methods still face challenges in handling the adhesion of adjacent primary silicon particles and effectively utilizing consistency in unlabeled data.To address these issues,this paper proposes a novel semi-supervised framework for Al-Si alloy microstructure image segmentation.First,we introduce a Rotational Uncertainty Correction Strategy(RUCS).This strategy employs multi-angle rotational perturbations andMonte Carlo sampling to assess prediction consistency,generating a pixel-wise confidence weight map.By integrating this map into the loss function,the model dynamically focuses on high-confidence regions,thereby improving generalization ability while reducing manual annotation pressure.Second,we design a Boundary EnhancementModule(BEM)to strengthen boundary feature extraction through erosion difference and multi-scale dilated convolutions.This module guides the model to focus on the boundary regions of adjacent particles,effectively resolving particle adhesion and improving segmentation accuracy.Systematic experiments were conducted on the Aluminum-Silicon Alloy Microstructure Dataset(ASAD).Results indicate that the proposed method performs exceptionally well with scarce labeled data.Specifically,using only 5%labeled data,our method improves the Jaccard index and Adjusted Rand Index(ARI)by 2.84 and 1.57 percentage points,respectively,and reduces the Variation of Information(VI)by 8.65 compared to stateof-the-art semi-supervised models,approaching the performance levels of 10%labeled data.These results demonstrate that the proposed method significantly enhances the accuracy and robustness of quantitative microstructure analysis while reducing annotation costs.
基金financially supported by the National Science Fund for Distinguished Young Scholars,China(No.52025041)the National Natural Science Foundation of China(Nos.52450003,U2341267,and 52174294)+1 种基金the National Postdoctoral Program for Innovative Talents,China(No.BX20240437)the Fundamental Research Funds for the Central Universities,China(Nos.FRF-IDRY-23-037 and FRF-TP-20-02C2)。
文摘The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.
基金supported by the Jiangxi Provincial Natural Science Foundation of China(Grant number 20224BAB204049)the Fund Project of Jiangxi Provincial Department of Education(Grant number GJJ2200602)the National Natural Science Foundation of China(Grant number 52205194)。
文摘The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.
基金the support from the National Natural Science Foundation of China (Nos. U20A20274, 52061003)the Natural Science Foundation of Yunnan Province, China (No. 202301AT070209)the Science and Technology Major Project of Yunnan Province, China (No. 202102AG050017)。
文摘The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.
基金supported by the National Natural Science Foundation of China(No.52405394)the Natural Science Foundation of Shanghai(No.24ZR1436500)+2 种基金the Natural Science Foundation of Chongqing(No.CSTB2024NSCQMSX0677)the Science Innovation Foundation of Shanghai Academy of Spaceflight Technology(No.SAST2024-039)the Startup Fund for Young Faculty at SJTU(No.24X010502880).
文摘Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic casting is challenging owing to defects such as RE oxides and shrinkage porosity,making fusion welding essential for both defect repair and structural joining.This review comprehensively examines recent advances in fusion welding of Mg-RE alloys,with emphasis on the interplay between their unique physicochemical properties and welding metallurgy.Various fusion welding methods suitable for Mg-RE alloys are compared and analyzed.Detailed characterization of joint regions reveals how thermal gradients and cooling rates govern phase evolution,grain morphology,and defect formation.Moreover,welding parameters and heat treatment strategies are systematically discussed for the microstructural configuration,especially for the inherent conflicts between grain coarsening in fusion zone and eutectic dissolution in heat-affected zone.Future research directions are also outlined.By correlating Mg-RE alloy properties with fusion welding processes,this review provides practical insights for designing reliable welded structures in critical applications.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金financially supported by the National Key Research and Development Program of China(Nos.2022YFB3709300,2021YFB3701000)the National Natural Science Foundation of China(Nos.52271090,52071036,U2037601,U21A2048)+1 种基金Chongqing Science and Technology Commission,China(Nos.CSTB2022TIAD-KPX0021,CSTC2024YCJHBGZXM0164,CSTB2024TIAD-KPX0001)the Fundamental Research Funds for the Central Universities,China(No.2022CDJDX-002)。
文摘The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.
基金financially supported by the Natural Science Foundation of Liaoning Province of China(2022-MS-109)the Key Research and Development Program of Liaoning Province(2023JH2/101800045)the Ministry of Science and Technology of the Peoples Republic of China(ZZ2021006).
文摘The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.
基金supported by the Key R&D Projects in Heilongjiang Province(GA23A901)。
文摘Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金Funded by Natural Science Foundation of Guangxi(No.2025GXNSFBA069565)Guangxi Science and Technology Program(No.AD25069101)Guangxi Bagui Scholars Fund。
文摘Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.
