The Feynman ratchet has the ability to convert random fluctuations into directional particle transport.The transport velocity of particles is highly dependent on their size,leading to directional transport and subsequ...The Feynman ratchet has the ability to convert random fluctuations into directional particle transport.The transport velocity of particles is highly dependent on their size,leading to directional transport and subsequent particle separation under suitable parameter conditions.Here,exploiting the distinct responses of particles with different sizes to the system,the separation of bi-dispersed dust particles is achieved experimentally in air at 35 Pa using a dusty plasma ratchet.To reveal the underlying mechanisms,we construct a plasma model and perform Langevin simulations for the particle separation.Our numerical results reveal that charged dust particles experience an asymmetric ratchet potential,which dictates their directional transport.Crucially,bi-dispersed dust particles are suspended at different heights and are subject to ratchet potentials with opposing asymmetries,resulting in their separation.These findings may offer new perspectives for related fields,including microfluidics,nanotechnology,and micrometer-scale particle manipulation.展开更多
Imidazole(IM)particles in the atmosphere affect climate,atmospheric chemical reactions,and human health.However,research on IM particles in the Sichuan Basin(SCB),one of the areas of China affected most heavily by haz...Imidazole(IM)particles in the atmosphere affect climate,atmospheric chemical reactions,and human health.However,research on IM particles in the Sichuan Basin(SCB),one of the areas of China affected most heavily by haze,remains very scarce.This study used single-particle aerosol mass spectrometry to investigate IM-containing particles in Chengdu,one of the megacities in the SCB,during summer and winter before and after implemen-tation of the Three-year Action Plan to Win the Blue-Sky Defense War(BSDW).We found that IM-containing particles accounted for 1.2%–12.0%of all detected particles,and they highly mixed with carbonaceous com-ponents,secondary inorganic species,and organic nitrogen.From before to after the BSDW,the proportion of IM-containing particles decreased by 1.8%in summer,but increased by 9.6%in winter.Ammonium/amines and carbonyl compounds were closely related to IM-containing particles;the highest proportion of IM-containing particles occurred in particles mixed with amines and carbonyls.The number fraction of IM-containing particles in all seasons was higher at night than during daytime.The potential source areas of IM-containing particles showed notable narrowing after the BSDW,and the high-value areas were found distributed closer to Chengdu and its surrounding areas.In the winter before the BSDW,most IM-containing particles(>70%)were mixed with organic carbon(OC)particles,and the contributions of OC and mixed organic–elemental carbon(OC-EC)particles increased with aggravation of pollution,whereas OC-EC and Metal particles played a more crucial role in the winter after the BSDW.展开更多
Submicron-sized peanut-shaped poly（methyl methacrylate）/polystyrene （PMMA/PS） particles were successfully synthesized by seeded soap-free emulsion polymerization of styrene on the spherical crosslinked PMMA seed p...Submicron-sized peanut-shaped poly（methyl methacrylate）/polystyrene （PMMA/PS） particles were successfully synthesized by seeded soap-free emulsion polymerization of styrene on the spherical crosslinked PMMA seed particles. The obtained peanut- shaped particles showed a novel internal morphology： PS phase formed one domain which linked to the other domain having PMMA core encased by PS shell.展开更多
Micron-sized nonspherical polymer particles having different morphologies were synthesized by seeded soap-free emulsion polymerization of styrene （St） and ethyleneglycol dimethacrylate （EGDMA, used as a crosslinker...Micron-sized nonspherical polymer particles having different morphologies were synthesized by seeded soap-free emulsion polymerization of styrene （St） and ethyleneglycol dimethacrylate （EGDMA, used as a crosslinker） on spherical, linear polystyrene （PS） seed particles. The morphology of the resulting PS/poly（St-co-EGDMA） particles was dependent on the crosslinker concentration and polymerization temperature.展开更多
In the exploitation process of offshore natural gas hydrate(“hydrate”for short),it is necessary to take into consideration the wear of wellbore equipment caused by micron-sized sand particles after their breaking th...In the exploitation process of offshore natural gas hydrate(“hydrate”for short),it is necessary to take into consideration the wear of wellbore equipment caused by micron-sized sand particles after their breaking through the sand control facility of the wellbore.At present,however,there is no literature on the migration,deposition and blockage of micron-sized sand particles(<44 μm)after their flowing into the wellbore with the formation fluid.To deal with this situation,this paper took the sand particles in a throttling helical tube section for water transport in the process of depressurization hydrate exploitation as the research object.After a geometric model of flow channel was established for numerical simulation,the migration and deposition laws of micron-sized sand particles were analyzed and the critical non-deposition water velocity of micronsized sand particles under different conditions was obtained.And the following research results were obtained.First,micron-sized sand particles are mainly accumulated in the helical tube section of a complex pipeline,and the deposition of sand particles decreases with the increase of water velocity.The sand particles deposited in the upper part of the helical tube section are more difficult to clean than those in the lower part.Second,the critical non-deposition water velocity increases gradually with the increase of sand particle size and sand production concentration.Third,the variables are nondimensionalized by applying the Buckingham-P theorem.And the model for predicting the sand deposition concentration in the local complex wellbore section during hydrate production test can be obtained using the OriginPro 2019 non-linear fitting tool.Fourth,based on the proposed concept of sand deposition concentration ratio,combined with the deposition prediction model,it is convenient to calculate critical non-deposition water velocity of micron-sized sand particles and to judge the situation of sand deposition in the wellbore.In conclusion,a method for determining the critical non-deposition water velocity of micron-sized sand particles in the local complex wellbore section during the hydrate production test is proposed.And by virtue of this method,the critical non-deposition water velocity of micron-sized sand particles under three particle sizes and three sand production concentrations is obtained respectively.And the research results provide a basis for the reasonable arrangement of hydrate production system and pressure reduction range.展开更多
Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cyclin...Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cycling leads to the accumulation of undesirable stresses,resulting in pulverization of silicon microparticles and shortened lifespan of the batteries.Herein,a composite film of Cu-PET-Cu is proposed as the current collector(CC)forμSi anodes to replace the conventional Cu CC.Cu-PET-Cu CC is prepared by depositing Cu on both sides of a polyethylene terephthalate(PET)film.The PET layer promises good ductility of the film,permitting the Cu-PET-Cu CC to accommodate the volumetric changes of silicon microparticles and facilitates the stress release through ductile deformation.As a result,theμSi electrode with Cu-PET-Cu CC retains a high specific capacity of 2181 mA h g^(-1),whereas theμSi electrode with Cu CC(μSi/Cu)exhibits a specific capacity of 1285 mA h g^(-1)after 80 cycles.The stress relieving effect of CuPET-Cu was demonstrated by in-situ fiber optic stress monitoring and multi-physics simulations.This work proposes an effective stress relief strategy at the electrode level for the practical implementation ofμSi anodes.展开更多
Ni-based composite coatings incorporated with nano/micron SiC particles were fabricated via electrochemical co-deposition in Watts bath,followed by the evaluation of their mechanical and anti-corrosion properties.The ...Ni-based composite coatings incorporated with nano/micron SiC particles were fabricated via electrochemical co-deposition in Watts bath,followed by the evaluation of their mechanical and anti-corrosion properties.The micrographic observations suggest that the SiC particles with various sizes can be well incorporated to the Ni substrate.X-ray diffraction(XRD)patterns indicate that SiC particles with smaller sizes could weaken the preferential growth of Ni along(200)facet.In addition,it is found that the incorporated SiC particles with medium micron sizes(8 and 1.5μm)could significantly enhance the micro-hardness of the Ni composite coatings.Nevertheless,electrochemical measurements demonstrate that micron-sized SiC particles would weaken the corrosion resistance of Ni composite coatings ascribed to the structure defects induced.In contrast,the combined incorporation of nanosized(50 nm)SiC particles with medium micron(1.5μm)ones is capable of promoting the compactness of the composite coatings,which is beneficial to the long-term corrosion resistance with negligible micro-hardness loss.展开更多
WC particles reinforced CoCrFeNiMo high-entropy alloy(HEA)composite coatings were prepared on Cr12MoV steel successfully by laser cladding technology to improve the wear resistance of substrates.Effect of WC content o...WC particles reinforced CoCrFeNiMo high-entropy alloy(HEA)composite coatings were prepared on Cr12MoV steel successfully by laser cladding technology to improve the wear resistance of substrates.Effect of WC content on microstructure and wear property of the composite coatings was studied in detail.Large numbers of carbides with four main types:primary carbide crystals,eutectic structures,massive crystals growing along the periphery of the remaining WC particles and incompletely fused WC particles,were found to exist in the WC/CoCrFeNiMo composite coatings.With increasing WC content,the microhardness of coatings is gradually improved while the average friction coefficients follow the opposite trend due to solid solution strengthening and second phase strengthening effect.The maximum microhardness and minimum friction coefficient are HV_(0.2)689.7 and 0.72,respectively,for the composite coating with 30 wt.%WC,the wear resistance of the substrate is improved significantly,the wear mechanisms are spalling wear and abrasive wear due to their high microhardness.展开更多
Polybrominated biphenyl ethers(PBDEs)and polycyclic aromatic hydrocarbons(PAHs)are commonly detected contaminants at e-waste recycling sites.Against the conventional wisdom that PBDEs and PAHs are highly immobile and ...Polybrominated biphenyl ethers(PBDEs)and polycyclic aromatic hydrocarbons(PAHs)are commonly detected contaminants at e-waste recycling sites.Against the conventional wisdom that PBDEs and PAHs are highly immobile and persist primarily in shallowsurface soils,increasing evidence shows that these compounds can leach into the groundwater.Herein,we compare the leachabilities of PBDEs vs.PAHs from contaminated soils collected at an e-waste recycling site in Tianjin,China.Considerable amounts of BDE-209(0.3–2 ng/L)and phenanthrene(42–106 ng/L),the most abundant PBDE and PAH at the site,are detected in the effluents of columns packed with contaminated soils,with the specific concentrations varying with hydrodynamic and solution chemistry conditions.Interestingly,the leaching potential of BDE-209 appears to be closely related to the release of colloidal mineral particles,whereas the leachability of phenanthrene correlates well with the concentration of dissolved organic carbon in the effluent,but showing essentially no correlation with the concentration of mineral particles.The surprisingly different trends of the leachability observed between BDE-209 and phenanthrene is counterintuitive,as PBDEs and PAHs often co-exist at e-waste recycling sites(particularly at the sites wherein incineration is being practiced)and share many similarities in terms of physicochemical properties.One possible explanation is that due to its extremely low solubility,BDE-209 predominantly exists in free-phase(i.e.,as solid(nano)particles),whereas the more soluble phenanthrene is mainly sorbed to soil organic matter.Findings in this study underscore the need to better understand the mobility of highly hydrophobic organic contaminants at contaminated sites for improved risk management.展开更多
Densely distributed coherent nanoparticles(DCN)in steel matrix can enhance the work-hardening ability and ductility of steel simultaneously.All the routes to this end can be generally classified into the liquid-solid ...Densely distributed coherent nanoparticles(DCN)in steel matrix can enhance the work-hardening ability and ductility of steel simultaneously.All the routes to this end can be generally classified into the liquid-solid route and the solid-solid route.However,the formation of DCN structures in steel requires long processes and complex steps.So far,obtaining steel with coherent particle enhancement in a short time remains a bottleneck,and some necessary steps remain unavoidable.Here,we show a high-efficiency liquid-phase refining process reinforced by a dynamic magnetic field.Ti-Y-Mn-O particles had an average size of around(3.53±1.21)nm and can be obtained in just around 180 s.These small nanoparticles were coherent with the matrix,implying no accumulated dislocations between the particles and the steel matrix.Our findings have a potential application for improving material machining capacity,creep resistance,and radiation resistance.展开更多
Thermodynamic modeling is still themostwidely usedmethod to characterize aerosol acidity,a critical physicochemical property of atmospheric aerosols.However,it remains unclear whether gas-aerosol partitioning should b...Thermodynamic modeling is still themostwidely usedmethod to characterize aerosol acidity,a critical physicochemical property of atmospheric aerosols.However,it remains unclear whether gas-aerosol partitioning should be incorporated when thermodynamicmodels are employed to estimate the acidity of coarse particles.In this work,field measurements were conducted at a coastal city in northern China across three seasons,and covered wide ranges of temperature,relative humidity and NH_(3) concentrations.We examined the performance of different modes of ISORROPIA-II(a widely used aerosol thermodynamic model)in estimating aerosol acidity of coarse and fine particles.The M0 mode,which incorporates gas-phase data and runs the model in the forward mode,provided reasonable estimation of aerosol acidity for coarse and fine particles.Compared to M0,the M1 mode,which runs the model in the forward mode but does not include gas-phase data,may capture the general trend of aerosol acidity but underestimates pH for both coarse and fine particles;M2,which runs the model in the reverse mode,results in large errors in estimated aerosol pH for both coarse and fine particles and should not be used for aerosol acidity calculations.However,M1 significantly underestimates liquid water contents for both fine and coarse particles,while M2 provides reliable estimation of liquid water contents.In summary,our work highlights the importance of incorporating gas-aerosol partitioning when estimating coarse particle acidity,and thus may help improve our understanding of acidity of coarse particles.展开更多
The development of efficient,cost-effective catalysts for the oxygen reduction reaction(ORR)is crucial for advancing zinc-air batteries(ZABs).This study presents Fe_(4)N nanoparticles embedded in N-doped carbon nanofi...The development of efficient,cost-effective catalysts for the oxygen reduction reaction(ORR)is crucial for advancing zinc-air batteries(ZABs).This study presents Fe_(4)N nanoparticles embedded in N-doped carbon nanofibers(Fe_(4)N@CNF-NH_(3))as a highly efficient ORR catalyst.The Fe_(4)N@CNF-NH_(3)catalyst was synthesized via electrospinning,followed by high-temperature annealing in an NH_(3)atmosphere.This electrospinning technique ensured the uniform dispersion of Fe_(4)N nanoparticles within the carbon nanofibers(CNFs),preventing agglomeration and enhancing the availability of active sites.Structural and morphological analyses confirmed the formation of Fe_(4)N nanoparticles with a lattice spacing of 0.213 nm,surrounded by graphitic carbon structures that significantly improved the material’s conductivity and stability.Electrochemical tests demonstrated that Fe_(4)N@CNF-NH_(3)exhibited superior ORR activity,with a half-wave potential of 0.904 V,surpassing that of commercial Pt/C catalysts.This enhanced performance is attributed to the synergistic effects of Fe_(4)N nanoparticles and the conductive carbon framework,which facilitated efficient charge and mass transfer during the ORR process.Density functional theory calculations further revealed that the introduction of CNFs positively shifted the d-band center of Fe atoms,optimizing oxygen intermediate adsorption and lowering energy barriers for ORR.The practical applicability of Fe_(4)N@CNF-NH_(3)was validated through the assembly of both liquid-state and solid-state ZABs,which exhibited excellent cycling stability,high power density,and superior discharge voltage.This study offers a promising strategy for developing highly active,low-cost ORR catalysts and advances the potential for the commercialization of ZABs.展开更多
The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological d...The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological data of these particles has became a key focus in wear debris analysis.Herein,we develop a novel multi-view polarization-sensitive optical coherence tomography(PS-OCT)method to achieve accurate 3D morphology detection and reconstruction of aero-engine lubricant wear particles,effectively resolving occlusion-induced information loss while enabling material-specific characterization.The particle morphology is captured by multi-view imaging,followed by filtering,sharpening,and contour recognition.The method integrates advanced registration algorithms with Poisson reconstruction to generate high-precision 3D models.This approach not only provides accurate 3D morphological reconstruction but also mitigates information loss caused by particle occlusion,ensuring model completeness.Furthermore,by collecting polarization characteristics of typical metals and their oxides in aero-engine lubricants,this work comprehensively characterizes and comparatively analyzes particle polarization properties using Stokes vectors,polarization uniformity,and cumulative phase retardation,and obtains a three-dimensional model containing polarization information.Ultimately,the proposed method enables multidimensional information acquisition for the reliable identification of abrasive particle types.展开更多
Micron-sized silicon anodes offer significant industrial advantages over nanoscale counterparts due to their cost-effectiveness and scalability.However,their practical applications are significantly hindered by severe...Micron-sized silicon anodes offer significant industrial advantages over nanoscale counterparts due to their cost-effectiveness and scalability.However,their practical applications are significantly hindered by severe stress-induced fragmentation,leading to rapid capacity decay.Addressing this challenge,we introduce a novel dual-conformal encapsulated micron-sized porous Si(μm-pSi)anode by utilizingμm-Si recycled from the photovoltaic industry as the Si precursor.This encapsulation design of the internal conformal SiO_(x)/C layer and external Ti_(3)C_(2)Tx MXene layer forms intergranular and intragranular protective skins onμm-pSi,ensuring simultaneous mechanical and electrochemical stability for efficient Li+storage.As a result,the fabricated WpSi@SiO_(x)/C@MXene anode demonstrates an exceptional cycling performance,delivering 535.1 mA h g^(−1)after 1500 cycles at 5 A g^(−1)with a minimal capacity decay of 0.003%per cycle.Chemo-mechanical modeling and SEI analysis reveal that the dual-conformal coating achieves exceptional mechanical and electrochemical stability through robust mechanical confinement and ultra-fast Li+diffusion kinetics during lithiation,coupled with a Li_(2)CO_(3)/LiF-rich hybrid SEI that facilitates Li+transport,collectively enabling rate-insensitive stress evolution,long-term structural durability,and stable cycling under high-rate conditions.This work provides a compelling design strategy for leveraging sustainableμm-Si to achieve high-rate and long-life lithium-ion batteries.展开更多
Biocompatible amphiphilic nanoparticles(NPs)with tunable particle morphology and surface property are important for their applications as functional materials.However,previously developed methods to prepare amphiphili...Biocompatible amphiphilic nanoparticles(NPs)with tunable particle morphology and surface property are important for their applications as functional materials.However,previously developed methods to prepare amphiphilic NPs generally involve several steps,especially an additional step for surface modification,greatly hindering their largescale production and widespread applications.Here,a versatile one-step strategy is developed to prepare biocompatible amphiphilic dimer NPs with tunable particle morphology and surface property.The amphiphilic dimer NPs,which consist of a hydrophobic shellac bulb and a hydrophilic poly(lactic acid)(PLA)bulb with PLA-poly(ethylene glycol)(PEG)on the bulb surface,are prepared in a single step by controlled co-precipitation and self-assembly.Amphiphilic PLA-PEG/shellac dimer NPs demonstrate excellent tunability in particle morphology,thus showing good performances in controlling the interfacial curvature and emulsion type.In addition,temperatureresponsive PLA-poly(N-isopropyl acrylamide)(PNIPAM)/shellac dimer NPs are prepared following the same method and emulsions stabilized by them show temperature-triggered response.The applications of PLA-PEG-folic acid(FA)/shellac dimer NPs for drug delivery have also been demonstrated,which show a very good performance.The strategy of preparing the dimer NPs is green,scalable,facile and versatile,which provides a good platform for the design of dimer NPs with tunable particle morphology and surface property for diverse applications.展开更多
We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. B...We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. Both quantum gravity and the particle model are shown to be derivable from the supersymmetric 3d Chern-Simons action. Forces-Matter unification is achieved.展开更多
Studying the contribution of regional transport to ultrafine particles(UFPs)and the deposition effect of nanoscale particles in human respiratory system is conducive to exploring the impact of atmospheric particles on...Studying the contribution of regional transport to ultrafine particles(UFPs)and the deposition effect of nanoscale particles in human respiratory system is conducive to exploring the impact of atmospheric particles on the environment and human health.Based on the data set of number concentration spectrum in the particle size range of 5.6–560 nm in the spring of Hefei,the Yangtze River Delta region obtained by a fast mobility particle sizer,the explosive growth characteristics,potential source identification and deposition flux analysis of UFPs were systematically studied.The results showed that the frequency of new particle formation(NPF)events during spring was 31.5%.SO_(2) and O_(3) contribute to NPF events.Daytime,higher temperature,stronger solar radiation and lower humidity were more conducive to the explosive growth of UFPs.In addition,regional transport of pollutants from the cities around Hefei played an important role in the accumulation mode particles,which were mainly affected by the land-source air mass from northwest Jiangsu(23.64%)and the sea-source air mass from the Yellow Sea(23.99%).It was worth noting that approximately 10,406 ng of UFPs enters the human respiratory system every day.Themain deposition area of 5.6–560 nm nanoscale particles was alveolar,5.6–400 nm is more likely to be deposited on alveolar,while nanoscale particles with particle size between 400 and 560 nm is more likely to be deposited on head airways.This study identified the deposition risk of nanoscale particles in the respiratory system under different particle sizes.展开更多
Although the strengthening and grain refinement effects of TiB_(2) particles on aluminum alloys have been extensively studied,their influence on casting behavior remains relatively underexplored.In this study,the infl...Although the strengthening and grain refinement effects of TiB_(2) particles on aluminum alloys have been extensively studied,their influence on casting behavior remains relatively underexplored.In this study,the influence of different addition amounts of submicron TiB_(2) particles on the microstructure,casting performance,and mechanical properties of an Al-Cu(ZL205A)alloy was systematically investigated.The introduction of TiB_(2) particles leads to significant grain refinement,transforming the microstructure from coarse grains to fine equiaxed grains by providing additional nucleation sites and inhibiting grain growth.SEM and TEM analyses reveal that the added submicron TiB_(2) particles exhibit minimal effect on the distribution of intermetallic phases or precipitates.Casting performance,as evaluated by spiral fluidity and hot tearing tests,shows notable improvements with TiB_(2) additions.At a TiB_(2) content of 3wt.%,the fluidity length increases by 20%,and the hot tearing susceptibility coefficient decreases by 29%.These enhancements are mainly due to the refined grain structure and the formation of interdendritic bridging in TiB_(2)-reinforced alloys.However,the overall enahncement in casting properties shows little variation across the TiB_(2) additions from 0.2wt.% to 3wt.%.Mechanical testing shows that the highest hardness and strength are achieved with a 1wt.%addition of TiB_(2) particles,primarily attributed to refined grain size and reinforcement of the aluminum matrix.Based on these findings,a TiB_(2) particle content of 1wt.%is recommended for optimizing both the casting performance and mechanical properties of the ZL205A alloy.展开更多
Aerosol particle pollution has become an increasing serious environmental problem,and urban vegetation plays a long-lasting and positive role in mitigating it.This study compared the particle capture abilities of tree...Aerosol particle pollution has become an increasing serious environmental problem,and urban vegetation plays a long-lasting and positive role in mitigating it.This study compared the particle capture abilities of trees,shrubs,and herbs,and examined the compositions and influence of aerosol particles accumulated on leaf functional traits.Retained particles primarily contained Ca^(2+),K^(+),SO_(4)^(2-),NO_(3)^(-)and NH_(4)^(+),indicating their anthropogenic origins.The leathery-leaved tree Osmanthus fragrans and the papery-leaved herb Alternanthera sessilis demonstrated the higher competence in particle accumulation than other plants,and leaf morphologic structures(e.g.,leaf grooves,trichomes,waxy layers,and stomata characteristics)were closely associated with particle capture by plant species.Particle retention negatively impacted stomata,impeding photosynthesis,and reducing transpiration.In response to particle accumulation,plants tended to decrease specific leaf area and adjust stomatal conductance.Both growth form and leaf texture significantly influenced the particle capture abilities of different plant species.The substantial contribution of plants,particularly herbs in the lower vegetation strata,to particle removal should not be overlooked.Vegetation with a tree-shrub-herb configuration excels at particle capture,offering potential advantages in mitigating particle pollution and enhancing ecological benefits.展开更多
The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology char...The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology characterization.The results revealed that a huge difference of corrosion resistance between imported and domestic 6061 aluminum alloys in HCl solution and gas acid mist experiments mainly was attributed to the different size and amount of Al_(15)(Fe,Mn)_(3)Si_(2).The corrosion resistance of domestic 6061 alloy in dry/wet semiconductor electronic special gas environments was worse than that of imported aluminum alloy,and there are great differences in the corrosion mechanism of 6061 alloy caused by the second phase in the two dry/wet environments.And the corrosion resistance of the hard anodized alumina film was closely related to the microscopic morphology of holes.The vertical and elongatedα-Al_(15)(Mn,Fe)_(3)Si_(2) phase was formed in the rolled aluminum alloy that has been rolled perpendicular to the surface of the substrate.Compared to the horizontal long hole,the longitudinal long holes generated by the verticalα-Al_(15)(Mn,Fe)_(3)Si_(2) phase will enable the corrosive medium to reach the substrate rapidly,which significantly weakens the corrosion resistance of the hard anodized film.展开更多
基金supported by National Natural Science Foundation of China(Nos.12275064 and 12475203)the Hebei Natural Science Fund(No.A2024201020)+1 种基金Hebei University Natural Science Research Innovation Team Project(No.IT2023B03)the Post-graduate’s Innovation Fund Project of Hebei University(No.HBU2024BS007)。
文摘The Feynman ratchet has the ability to convert random fluctuations into directional particle transport.The transport velocity of particles is highly dependent on their size,leading to directional transport and subsequent particle separation under suitable parameter conditions.Here,exploiting the distinct responses of particles with different sizes to the system,the separation of bi-dispersed dust particles is achieved experimentally in air at 35 Pa using a dusty plasma ratchet.To reveal the underlying mechanisms,we construct a plasma model and perform Langevin simulations for the particle separation.Our numerical results reveal that charged dust particles experience an asymmetric ratchet potential,which dictates their directional transport.Crucially,bi-dispersed dust particles are suspended at different heights and are subject to ratchet potentials with opposing asymmetries,resulting in their separation.These findings may offer new perspectives for related fields,including microfluidics,nanotechnology,and micrometer-scale particle manipulation.
基金supported by Sichuan Science and Technology Program(No.2024NSFSC0060)the National Natural Science Foundation of China(No.U23A2030)the Basic Research Cultivation Support Plan of Southwest Jiaotong University(No.2682023ZTPY016).
文摘Imidazole(IM)particles in the atmosphere affect climate,atmospheric chemical reactions,and human health.However,research on IM particles in the Sichuan Basin(SCB),one of the areas of China affected most heavily by haze,remains very scarce.This study used single-particle aerosol mass spectrometry to investigate IM-containing particles in Chengdu,one of the megacities in the SCB,during summer and winter before and after implemen-tation of the Three-year Action Plan to Win the Blue-Sky Defense War(BSDW).We found that IM-containing particles accounted for 1.2%–12.0%of all detected particles,and they highly mixed with carbonaceous com-ponents,secondary inorganic species,and organic nitrogen.From before to after the BSDW,the proportion of IM-containing particles decreased by 1.8%in summer,but increased by 9.6%in winter.Ammonium/amines and carbonyl compounds were closely related to IM-containing particles;the highest proportion of IM-containing particles occurred in particles mixed with amines and carbonyls.The number fraction of IM-containing particles in all seasons was higher at night than during daytime.The potential source areas of IM-containing particles showed notable narrowing after the BSDW,and the high-value areas were found distributed closer to Chengdu and its surrounding areas.In the winter before the BSDW,most IM-containing particles(>70%)were mixed with organic carbon(OC)particles,and the contributions of OC and mixed organic–elemental carbon(OC-EC)particles increased with aggravation of pollution,whereas OC-EC and Metal particles played a more crucial role in the winter after the BSDW.
基金supported by National Natural Science Foundation of China(No.50943028)Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘Submicron-sized peanut-shaped poly（methyl methacrylate）/polystyrene （PMMA/PS） particles were successfully synthesized by seeded soap-free emulsion polymerization of styrene on the spherical crosslinked PMMA seed particles. The obtained peanut- shaped particles showed a novel internal morphology： PS phase formed one domain which linked to the other domain having PMMA core encased by PS shell.
基金partially supported by the National Natural Science Foundation of China(No.50943028)Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘Micron-sized nonspherical polymer particles having different morphologies were synthesized by seeded soap-free emulsion polymerization of styrene （St） and ethyleneglycol dimethacrylate （EGDMA, used as a crosslinker） on spherical, linear polystyrene （PS） seed particles. The morphology of the resulting PS/poly（St-co-EGDMA） particles was dependent on the crosslinker concentration and polymerization temperature.
基金supported by the National Major Science and Technology Project“Drilling hydraulics and borehole cleaning supporting techniques for complex structural cluster wells”(No.:2017ZX05009-003)National Natural Science Foundation Project of China“Rotary drive mechanism study on the hydraulicmagnetic coupling self-rotation borehole cleaning tools”(No.:51674087)Innovative Science and Research Project for the Postgraduates of Northeast Petroleum University“Cohesion mechanism and flow assurance study on the natural gas hydrates during deep-water drilling”(No.:YJSCX2017-008NEPU).
文摘In the exploitation process of offshore natural gas hydrate(“hydrate”for short),it is necessary to take into consideration the wear of wellbore equipment caused by micron-sized sand particles after their breaking through the sand control facility of the wellbore.At present,however,there is no literature on the migration,deposition and blockage of micron-sized sand particles(<44 μm)after their flowing into the wellbore with the formation fluid.To deal with this situation,this paper took the sand particles in a throttling helical tube section for water transport in the process of depressurization hydrate exploitation as the research object.After a geometric model of flow channel was established for numerical simulation,the migration and deposition laws of micron-sized sand particles were analyzed and the critical non-deposition water velocity of micronsized sand particles under different conditions was obtained.And the following research results were obtained.First,micron-sized sand particles are mainly accumulated in the helical tube section of a complex pipeline,and the deposition of sand particles decreases with the increase of water velocity.The sand particles deposited in the upper part of the helical tube section are more difficult to clean than those in the lower part.Second,the critical non-deposition water velocity increases gradually with the increase of sand particle size and sand production concentration.Third,the variables are nondimensionalized by applying the Buckingham-P theorem.And the model for predicting the sand deposition concentration in the local complex wellbore section during hydrate production test can be obtained using the OriginPro 2019 non-linear fitting tool.Fourth,based on the proposed concept of sand deposition concentration ratio,combined with the deposition prediction model,it is convenient to calculate critical non-deposition water velocity of micron-sized sand particles and to judge the situation of sand deposition in the wellbore.In conclusion,a method for determining the critical non-deposition water velocity of micron-sized sand particles in the local complex wellbore section during the hydrate production test is proposed.And by virtue of this method,the critical non-deposition water velocity of micron-sized sand particles under three particle sizes and three sand production concentrations is obtained respectively.And the research results provide a basis for the reasonable arrangement of hydrate production system and pressure reduction range.
基金supported by the the National Key R&D Program of China(2022YFB3803500)the Natural Science Foundation of Hubei Province(2021CFA066).
文摘Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cycling leads to the accumulation of undesirable stresses,resulting in pulverization of silicon microparticles and shortened lifespan of the batteries.Herein,a composite film of Cu-PET-Cu is proposed as the current collector(CC)forμSi anodes to replace the conventional Cu CC.Cu-PET-Cu CC is prepared by depositing Cu on both sides of a polyethylene terephthalate(PET)film.The PET layer promises good ductility of the film,permitting the Cu-PET-Cu CC to accommodate the volumetric changes of silicon microparticles and facilitates the stress release through ductile deformation.As a result,theμSi electrode with Cu-PET-Cu CC retains a high specific capacity of 2181 mA h g^(-1),whereas theμSi electrode with Cu CC(μSi/Cu)exhibits a specific capacity of 1285 mA h g^(-1)after 80 cycles.The stress relieving effect of CuPET-Cu was demonstrated by in-situ fiber optic stress monitoring and multi-physics simulations.This work proposes an effective stress relief strategy at the electrode level for the practical implementation ofμSi anodes.
基金This work was financially supported by National Natural Science Foundation of China(Nos.51901018 and 51771027)National Science and Technology Resources In-vestigation Program of China(No.2019FY101400)+3 种基金Funda-mental Research Funds for the Central Universities,China(Nos.FRF-MP-19-001 and FRF-AT-20-07)National Key Research and Development Program of China(No.2017YFB0702100)China Postdoctoral Science Foundation(No.2019M660456)Young Elite Scientists Sponsor-ship Program by China Association for Science and Techno-logy(YESS,No.2019QNRC001).
文摘Ni-based composite coatings incorporated with nano/micron SiC particles were fabricated via electrochemical co-deposition in Watts bath,followed by the evaluation of their mechanical and anti-corrosion properties.The micrographic observations suggest that the SiC particles with various sizes can be well incorporated to the Ni substrate.X-ray diffraction(XRD)patterns indicate that SiC particles with smaller sizes could weaken the preferential growth of Ni along(200)facet.In addition,it is found that the incorporated SiC particles with medium micron sizes(8 and 1.5μm)could significantly enhance the micro-hardness of the Ni composite coatings.Nevertheless,electrochemical measurements demonstrate that micron-sized SiC particles would weaken the corrosion resistance of Ni composite coatings ascribed to the structure defects induced.In contrast,the combined incorporation of nanosized(50 nm)SiC particles with medium micron(1.5μm)ones is capable of promoting the compactness of the composite coatings,which is beneficial to the long-term corrosion resistance with negligible micro-hardness loss.
基金Project(2021YFC2801904)supported by the National Key R&D Program of ChinaProject(KY10100230067)supported by the Basic Product Innovation Research Project,China+3 种基金Projects(52271130,52305344)supported by the National Natural Science Foundation of ChinaProjects(ZR2020ME017,ZR2020QE186)supported by the Natural Science Foundation of Shandong Province,ChinaProjects(AMGM2024F11,AMGM2021F10,AMGM2023F06)supported by the Science Fund of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai,ChinaProject(KY90200210015)supported by Leading Scientific Research Project of China National Nuclear Corporation(CNNC),China。
文摘WC particles reinforced CoCrFeNiMo high-entropy alloy(HEA)composite coatings were prepared on Cr12MoV steel successfully by laser cladding technology to improve the wear resistance of substrates.Effect of WC content on microstructure and wear property of the composite coatings was studied in detail.Large numbers of carbides with four main types:primary carbide crystals,eutectic structures,massive crystals growing along the periphery of the remaining WC particles and incompletely fused WC particles,were found to exist in the WC/CoCrFeNiMo composite coatings.With increasing WC content,the microhardness of coatings is gradually improved while the average friction coefficients follow the opposite trend due to solid solution strengthening and second phase strengthening effect.The maximum microhardness and minimum friction coefficient are HV_(0.2)689.7 and 0.72,respectively,for the composite coating with 30 wt.%WC,the wear resistance of the substrate is improved significantly,the wear mechanisms are spalling wear and abrasive wear due to their high microhardness.
基金supported by the National Key Research and Development Program of China(No.2019YFC1804202)the National Natural Science Foundation of China(Nos.22020102004 and 22125603)+1 种基金Tianjin Municipal Science and Technology Bureau(No.21JCZDJC00280)the Fundamental Research Funds for the Central Universities,and the Ministry of Education of China(No.T2017002).
文摘Polybrominated biphenyl ethers(PBDEs)and polycyclic aromatic hydrocarbons(PAHs)are commonly detected contaminants at e-waste recycling sites.Against the conventional wisdom that PBDEs and PAHs are highly immobile and persist primarily in shallowsurface soils,increasing evidence shows that these compounds can leach into the groundwater.Herein,we compare the leachabilities of PBDEs vs.PAHs from contaminated soils collected at an e-waste recycling site in Tianjin,China.Considerable amounts of BDE-209(0.3–2 ng/L)and phenanthrene(42–106 ng/L),the most abundant PBDE and PAH at the site,are detected in the effluents of columns packed with contaminated soils,with the specific concentrations varying with hydrodynamic and solution chemistry conditions.Interestingly,the leaching potential of BDE-209 appears to be closely related to the release of colloidal mineral particles,whereas the leachability of phenanthrene correlates well with the concentration of dissolved organic carbon in the effluent,but showing essentially no correlation with the concentration of mineral particles.The surprisingly different trends of the leachability observed between BDE-209 and phenanthrene is counterintuitive,as PBDEs and PAHs often co-exist at e-waste recycling sites(particularly at the sites wherein incineration is being practiced)and share many similarities in terms of physicochemical properties.One possible explanation is that due to its extremely low solubility,BDE-209 predominantly exists in free-phase(i.e.,as solid(nano)particles),whereas the more soluble phenanthrene is mainly sorbed to soil organic matter.Findings in this study underscore the need to better understand the mobility of highly hydrophobic organic contaminants at contaminated sites for improved risk management.
基金financially supported by the National Natural Science Foundation of China(No.51771125)the Sichuan Province Science and Technology Support Program(No.2020YFG0102)。
文摘Densely distributed coherent nanoparticles(DCN)in steel matrix can enhance the work-hardening ability and ductility of steel simultaneously.All the routes to this end can be generally classified into the liquid-solid route and the solid-solid route.However,the formation of DCN structures in steel requires long processes and complex steps.So far,obtaining steel with coherent particle enhancement in a short time remains a bottleneck,and some necessary steps remain unavoidable.Here,we show a high-efficiency liquid-phase refining process reinforced by a dynamic magnetic field.Ti-Y-Mn-O particles had an average size of around(3.53±1.21)nm and can be obtained in just around 180 s.These small nanoparticles were coherent with the matrix,implying no accumulated dislocations between the particles and the steel matrix.Our findings have a potential application for improving material machining capacity,creep resistance,and radiation resistance.
基金supported by the National Natural Science Foundation of China (Nos.42022050 and 42277088)the Guangdong Basic and Applied Basic Research Fund Committee (Nos.2021A1515011248 and 2023A1515012010)the Guangdong Foundation for the Program of Science and Technology Research (No.2020B1212060053).
文摘Thermodynamic modeling is still themostwidely usedmethod to characterize aerosol acidity,a critical physicochemical property of atmospheric aerosols.However,it remains unclear whether gas-aerosol partitioning should be incorporated when thermodynamicmodels are employed to estimate the acidity of coarse particles.In this work,field measurements were conducted at a coastal city in northern China across three seasons,and covered wide ranges of temperature,relative humidity and NH_(3) concentrations.We examined the performance of different modes of ISORROPIA-II(a widely used aerosol thermodynamic model)in estimating aerosol acidity of coarse and fine particles.The M0 mode,which incorporates gas-phase data and runs the model in the forward mode,provided reasonable estimation of aerosol acidity for coarse and fine particles.Compared to M0,the M1 mode,which runs the model in the forward mode but does not include gas-phase data,may capture the general trend of aerosol acidity but underestimates pH for both coarse and fine particles;M2,which runs the model in the reverse mode,results in large errors in estimated aerosol pH for both coarse and fine particles and should not be used for aerosol acidity calculations.However,M1 significantly underestimates liquid water contents for both fine and coarse particles,while M2 provides reliable estimation of liquid water contents.In summary,our work highlights the importance of incorporating gas-aerosol partitioning when estimating coarse particle acidity,and thus may help improve our understanding of acidity of coarse particles.
基金supported by the National Natural Science Foundation of China(No.11904208the Project of Shandong Province Higher Educational Science and Technology Program(No.J18KB098).
文摘The development of efficient,cost-effective catalysts for the oxygen reduction reaction(ORR)is crucial for advancing zinc-air batteries(ZABs).This study presents Fe_(4)N nanoparticles embedded in N-doped carbon nanofibers(Fe_(4)N@CNF-NH_(3))as a highly efficient ORR catalyst.The Fe_(4)N@CNF-NH_(3)catalyst was synthesized via electrospinning,followed by high-temperature annealing in an NH_(3)atmosphere.This electrospinning technique ensured the uniform dispersion of Fe_(4)N nanoparticles within the carbon nanofibers(CNFs),preventing agglomeration and enhancing the availability of active sites.Structural and morphological analyses confirmed the formation of Fe_(4)N nanoparticles with a lattice spacing of 0.213 nm,surrounded by graphitic carbon structures that significantly improved the material’s conductivity and stability.Electrochemical tests demonstrated that Fe_(4)N@CNF-NH_(3)exhibited superior ORR activity,with a half-wave potential of 0.904 V,surpassing that of commercial Pt/C catalysts.This enhanced performance is attributed to the synergistic effects of Fe_(4)N nanoparticles and the conductive carbon framework,which facilitated efficient charge and mass transfer during the ORR process.Density functional theory calculations further revealed that the introduction of CNFs positively shifted the d-band center of Fe atoms,optimizing oxygen intermediate adsorption and lowering energy barriers for ORR.The practical applicability of Fe_(4)N@CNF-NH_(3)was validated through the assembly of both liquid-state and solid-state ZABs,which exhibited excellent cycling stability,high power density,and superior discharge voltage.This study offers a promising strategy for developing highly active,low-cost ORR catalysts and advances the potential for the commercialization of ZABs.
文摘The morphological description of wear particles in lubricating oil is crucial for wear state monitoring and fault diagnosis in aero-engines.Accurately and comprehensively acquiring three-dimensional(3D)morphological data of these particles has became a key focus in wear debris analysis.Herein,we develop a novel multi-view polarization-sensitive optical coherence tomography(PS-OCT)method to achieve accurate 3D morphology detection and reconstruction of aero-engine lubricant wear particles,effectively resolving occlusion-induced information loss while enabling material-specific characterization.The particle morphology is captured by multi-view imaging,followed by filtering,sharpening,and contour recognition.The method integrates advanced registration algorithms with Poisson reconstruction to generate high-precision 3D models.This approach not only provides accurate 3D morphological reconstruction but also mitigates information loss caused by particle occlusion,ensuring model completeness.Furthermore,by collecting polarization characteristics of typical metals and their oxides in aero-engine lubricants,this work comprehensively characterizes and comparatively analyzes particle polarization properties using Stokes vectors,polarization uniformity,and cumulative phase retardation,and obtains a three-dimensional model containing polarization information.Ultimately,the proposed method enables multidimensional information acquisition for the reliable identification of abrasive particle types.
基金the financial support from the Natural Science Foundation of Shanghai(23ZR1423800)Open Research Fund of Shanghai Key Laboratory of Green Chemistry and Chemical Processes(East China Normal University,202503)+1 种基金State Key Laboratory of Advanced Fiber Materials(Donghua University,KF2406)Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education),Nankai University。
文摘Micron-sized silicon anodes offer significant industrial advantages over nanoscale counterparts due to their cost-effectiveness and scalability.However,their practical applications are significantly hindered by severe stress-induced fragmentation,leading to rapid capacity decay.Addressing this challenge,we introduce a novel dual-conformal encapsulated micron-sized porous Si(μm-pSi)anode by utilizingμm-Si recycled from the photovoltaic industry as the Si precursor.This encapsulation design of the internal conformal SiO_(x)/C layer and external Ti_(3)C_(2)Tx MXene layer forms intergranular and intragranular protective skins onμm-pSi,ensuring simultaneous mechanical and electrochemical stability for efficient Li+storage.As a result,the fabricated WpSi@SiO_(x)/C@MXene anode demonstrates an exceptional cycling performance,delivering 535.1 mA h g^(−1)after 1500 cycles at 5 A g^(−1)with a minimal capacity decay of 0.003%per cycle.Chemo-mechanical modeling and SEI analysis reveal that the dual-conformal coating achieves exceptional mechanical and electrochemical stability through robust mechanical confinement and ultra-fast Li+diffusion kinetics during lithiation,coupled with a Li_(2)CO_(3)/LiF-rich hybrid SEI that facilitates Li+transport,collectively enabling rate-insensitive stress evolution,long-term structural durability,and stable cycling under high-rate conditions.This work provides a compelling design strategy for leveraging sustainableμm-Si to achieve high-rate and long-life lithium-ion batteries.
基金supported by National Natural Science Foundation of China(No.22278352)National Key Research and Development Program of China(No.2021YFC3001100)+3 种基金Longyan City Science and Technology Plan Project(No.2020LYF17043)Longyan City Science and Technology Plan Project(No.2020LYF17042)ARC Discovery Project(No.DP200101238)and NHMRC Investigator Grant(No.APP2008698)supported by the Harvard Materials Research Science and Engineering Center(No.DMR2011754)。
文摘Biocompatible amphiphilic nanoparticles(NPs)with tunable particle morphology and surface property are important for their applications as functional materials.However,previously developed methods to prepare amphiphilic NPs generally involve several steps,especially an additional step for surface modification,greatly hindering their largescale production and widespread applications.Here,a versatile one-step strategy is developed to prepare biocompatible amphiphilic dimer NPs with tunable particle morphology and surface property.The amphiphilic dimer NPs,which consist of a hydrophobic shellac bulb and a hydrophilic poly(lactic acid)(PLA)bulb with PLA-poly(ethylene glycol)(PEG)on the bulb surface,are prepared in a single step by controlled co-precipitation and self-assembly.Amphiphilic PLA-PEG/shellac dimer NPs demonstrate excellent tunability in particle morphology,thus showing good performances in controlling the interfacial curvature and emulsion type.In addition,temperatureresponsive PLA-poly(N-isopropyl acrylamide)(PNIPAM)/shellac dimer NPs are prepared following the same method and emulsions stabilized by them show temperature-triggered response.The applications of PLA-PEG-folic acid(FA)/shellac dimer NPs for drug delivery have also been demonstrated,which show a very good performance.The strategy of preparing the dimer NPs is green,scalable,facile and versatile,which provides a good platform for the design of dimer NPs with tunable particle morphology and surface property for diverse applications.
文摘We review a 3d quantum gravity model, which incorporates massive spinning fields into the Euclidean path integral in a Chern-Simons formulation. Fundamental matter as defined in our previous preon model is recapped. Both quantum gravity and the particle model are shown to be derivable from the supersymmetric 3d Chern-Simons action. Forces-Matter unification is achieved.
基金supported by the National Natural Science Foundation of China(Nos.U21A2027,42207113,and 42407141)。
文摘Studying the contribution of regional transport to ultrafine particles(UFPs)and the deposition effect of nanoscale particles in human respiratory system is conducive to exploring the impact of atmospheric particles on the environment and human health.Based on the data set of number concentration spectrum in the particle size range of 5.6–560 nm in the spring of Hefei,the Yangtze River Delta region obtained by a fast mobility particle sizer,the explosive growth characteristics,potential source identification and deposition flux analysis of UFPs were systematically studied.The results showed that the frequency of new particle formation(NPF)events during spring was 31.5%.SO_(2) and O_(3) contribute to NPF events.Daytime,higher temperature,stronger solar radiation and lower humidity were more conducive to the explosive growth of UFPs.In addition,regional transport of pollutants from the cities around Hefei played an important role in the accumulation mode particles,which were mainly affected by the land-source air mass from northwest Jiangsu(23.64%)and the sea-source air mass from the Yellow Sea(23.99%).It was worth noting that approximately 10,406 ng of UFPs enters the human respiratory system every day.Themain deposition area of 5.6–560 nm nanoscale particles was alveolar,5.6–400 nm is more likely to be deposited on alveolar,while nanoscale particles with particle size between 400 and 560 nm is more likely to be deposited on head airways.This study identified the deposition risk of nanoscale particles in the respiratory system under different particle sizes.
文摘Although the strengthening and grain refinement effects of TiB_(2) particles on aluminum alloys have been extensively studied,their influence on casting behavior remains relatively underexplored.In this study,the influence of different addition amounts of submicron TiB_(2) particles on the microstructure,casting performance,and mechanical properties of an Al-Cu(ZL205A)alloy was systematically investigated.The introduction of TiB_(2) particles leads to significant grain refinement,transforming the microstructure from coarse grains to fine equiaxed grains by providing additional nucleation sites and inhibiting grain growth.SEM and TEM analyses reveal that the added submicron TiB_(2) particles exhibit minimal effect on the distribution of intermetallic phases or precipitates.Casting performance,as evaluated by spiral fluidity and hot tearing tests,shows notable improvements with TiB_(2) additions.At a TiB_(2) content of 3wt.%,the fluidity length increases by 20%,and the hot tearing susceptibility coefficient decreases by 29%.These enhancements are mainly due to the refined grain structure and the formation of interdendritic bridging in TiB_(2)-reinforced alloys.However,the overall enahncement in casting properties shows little variation across the TiB_(2) additions from 0.2wt.% to 3wt.%.Mechanical testing shows that the highest hardness and strength are achieved with a 1wt.%addition of TiB_(2) particles,primarily attributed to refined grain size and reinforcement of the aluminum matrix.Based on these findings,a TiB_(2) particle content of 1wt.%is recommended for optimizing both the casting performance and mechanical properties of the ZL205A alloy.
基金supported by the National Natural Science Foundation of China(No.31700475).
文摘Aerosol particle pollution has become an increasing serious environmental problem,and urban vegetation plays a long-lasting and positive role in mitigating it.This study compared the particle capture abilities of trees,shrubs,and herbs,and examined the compositions and influence of aerosol particles accumulated on leaf functional traits.Retained particles primarily contained Ca^(2+),K^(+),SO_(4)^(2-),NO_(3)^(-)and NH_(4)^(+),indicating their anthropogenic origins.The leathery-leaved tree Osmanthus fragrans and the papery-leaved herb Alternanthera sessilis demonstrated the higher competence in particle accumulation than other plants,and leaf morphologic structures(e.g.,leaf grooves,trichomes,waxy layers,and stomata characteristics)were closely associated with particle capture by plant species.Particle retention negatively impacted stomata,impeding photosynthesis,and reducing transpiration.In response to particle accumulation,plants tended to decrease specific leaf area and adjust stomatal conductance.Both growth form and leaf texture significantly influenced the particle capture abilities of different plant species.The substantial contribution of plants,particularly herbs in the lower vegetation strata,to particle removal should not be overlooked.Vegetation with a tree-shrub-herb configuration excels at particle capture,offering potential advantages in mitigating particle pollution and enhancing ecological benefits.
基金financially supported by the Program of the National Natural Science Foundation of China(Grant No.52371055)the Young Elite Scientist Sponsorship Program Cast(Grant No.YESS20200139)the Basic Scientific Research Project of Liaoning Provincial Department of Education(Grant No.JYTMS20230618)。
文摘The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology characterization.The results revealed that a huge difference of corrosion resistance between imported and domestic 6061 aluminum alloys in HCl solution and gas acid mist experiments mainly was attributed to the different size and amount of Al_(15)(Fe,Mn)_(3)Si_(2).The corrosion resistance of domestic 6061 alloy in dry/wet semiconductor electronic special gas environments was worse than that of imported aluminum alloy,and there are great differences in the corrosion mechanism of 6061 alloy caused by the second phase in the two dry/wet environments.And the corrosion resistance of the hard anodized alumina film was closely related to the microscopic morphology of holes.The vertical and elongatedα-Al_(15)(Mn,Fe)_(3)Si_(2) phase was formed in the rolled aluminum alloy that has been rolled perpendicular to the surface of the substrate.Compared to the horizontal long hole,the longitudinal long holes generated by the verticalα-Al_(15)(Mn,Fe)_(3)Si_(2) phase will enable the corrosive medium to reach the substrate rapidly,which significantly weakens the corrosion resistance of the hard anodized film.
