A novel thermally induced graft polymerization technique was used to modify a polyvinylidene fluoride （PVDF） hollow fibre microfiltration membrane. An artificial neural network （ANN） was applied to optimize the pr...A novel thermally induced graft polymerization technique was used to modify a polyvinylidene fluoride （PVDF） hollow fibre microfiltration membrane. An artificial neural network （ANN） was applied to optimize the prepared condition of the membrane. The optimized dosing of acrylic acid （AA）, acrylamide （AM）, N, N＇- methylenebisacrylamide （NMBA） and potassium persulphate （KSP） designed by ANN was that AA was 40.63 ml/L; AM acted as 6.25 g/L; NMBA was 1.72 g/L and KSP was 1.5 g/L, respectively. The thermal stability of the PVDF modified hollow fibre membrane （PVDF-PAA） was investigated by thermogravimetric （TG） and differential scanning calorimetry （DSC） analysis. The polycrystallinity of the PVDF-PAA membrane was evaluated by X-ray diffraction （XRD） analysis. The complex formation of the modified membrane was ascertained by Fourier transform infrared spectroscopy （FTIR）. The morphology of the PVDF-PAA membrane was studied by environmental scanning electron microscopy （ESEM）. The surface compositions of the membrane were analyzed by X-ray photoelectron spectroscopy （XPS）. The adsorption capacity of Cu^2＋ ion on the PVDF-PAA hollow fibre membrane was also investigated.展开更多
Precluding the excessive lipoproteins from plasma rapidly and effectively is highly needed for biomedical detection and reducing plasma product scrap in blood donation stations.The current centrifugation procedure is ...Precluding the excessive lipoproteins from plasma rapidly and effectively is highly needed for biomedical detection and reducing plasma product scrap in blood donation stations.The current centrifugation procedure is high-cost and time-consuming.Herein,we fabricated an anionic microfiltration polyethersulfone(PES)membrane modified by interface swelling and implanting of acrylic acid(AA)for screening out large particle lipoprotein chylomicron(CM)and adsorbing cationic very low-density lipoproteins(VLDL).To improve the separation efficiency,a two-stage filtration through carboxylated polyethersulfone microfiltration membranes with the mean pore size of 0.45 and 0.22μm respectively were conducted.Attenuated total reflection Fourier transform infrared technique(ATR-FTIR),water contact angle(WCA),Zeta potential and scanning electron microscope(SEM)were employed to characterize the modified membrane.To test the effectiveness of this membrane,plasma flux and concentration variation of plasma components were examined to study the purification effectiveness.Furthermore,the hemocompatibility of modified membranes was tested to confirm its practicability on bloodcontacting materials.The carboxylated polyethersulfone microfiltration membrane shows its promising potential application to purify chylous plasma.展开更多
Microfiltration membrane technology has been widely used in various industries for solid-liquid separation. However, pore clogging remains a persistent challenge. This study employs (CFD) and discrete element method (...Microfiltration membrane technology has been widely used in various industries for solid-liquid separation. However, pore clogging remains a persistent challenge. This study employs (CFD) and discrete element method (DEM) models to enhance our understanding of microfiltration membrane clogging. The models were validated by comparing them to experimental data, demonstrating reasonable consistency. Subsequently, a parametric study was conducted on a cross-flow model, exploring the influence of key parameters on clogging. Findings show that clogging is a complex phenomenon affected by various factors. The mean inlet velocity and transmembrane flux were found to directly impact clogging, while the confinement ratio and cosine of the membrane pore entrance angle had an inverse relationship with it. Two clog types were identified: internal (inside the pore) and external (arching at the pore entrance), with the confinement ratio determining the type. This study introduced a dimensionless number as a quantitative clogging indicator based on transmembrane flux, Reynolds number, filtration time, entrance angle cosine, and confinement ratio. While this hypothesis held true in simulations, future studies should explore variations in clogging indicators, and improved modeling of clogging characteristics. Calibration between numerical and physical times and consideration of particle volume fraction will enhance understanding.展开更多
Polymerizable ionic liquid copolymer P（MMA-co-BVIm-Br） was synthesized by radical polymerization technique, and characterized by Fourier transform infrared spectrometry （FTIR）, 1H Nuclear magnetic resonance （1H-...Polymerizable ionic liquid copolymer P（MMA-co-BVIm-Br） was synthesized by radical polymerization technique, and characterized by Fourier transform infrared spectrometry （FTIR）, 1H Nuclear magnetic resonance （1H-NMR） and gel permeation chromatography （GPC）. The resulting copolymer was used to prepare poly（vinylidene fluoride） （PVDF） blend membranes via a phase inversion method. The effects of the copolymer on the polymorphism, surface wettability and zeta potential （0 of the blend membranes were investigated by ATR-FTIR, contact angle instrument and zeta potential analyzer. Scanning electron microscopy （SEM and SEM-EDS） was also applied to investigate the morphology and the surface element changes of the fabricated membranes. The results indicated that P（MMA-co-BVIm-Br） copolymer existed on the surface of the membrane which made the blend membrane have a positive surface during the experimental pH range. The copolymer was also in favor of the formation of βcrystal phase in PVDF membranes. The contact angle experiment indicated that P（MMA-co-BVIm-Br） copolymer could switch the wettability of the blend membranes from hydrophilic to hydrophobic by exchanging Br- anion with PF6-. Compared with pure PVDF membranes, the water flux and water recovery flux of the blend membranes were enhanced obviously. The results from the flux recovery ratio （FR） and total fouling ratio （Rt） all suggested that the blend membranes had good anti-fouling properties.展开更多
Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified wi...Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified with the polymerizable UV absorber 2-[2-hydroxy-5-[2-(methacryloyloxy)ethyl]phenyl]-2 H-benzotriazole(RUVA-93). The influences of irradiation dose and monomer concentration on the prepared PVDF-g-PRUVA-93 membranes were investigated, and the optimal condition was eventually obtained. The chemical structures of the films were studied by ~1H-NMR, FTIR, and XRD. UV light transmittance and DSC tests were used to characterize the UV-absorbing performance and thermal property of the PVDF films before and after modification. The results proved that the PRUVA-93 side chains were successfully incorporated into the PVDF main chains and the obtained PVDF-g-PRUVA-93 films possessed remarkable UV-absorbing property. The modified membrane made under the optimized experiment condition could completely block the UV light in the range of 200-387 nm. Additionally, the transmittance of the PVDF-g-PRUVA-93 film could be reduced to0.04% in 280-320 nm, where the light irradiation could damage polymer materials most seriously.展开更多
A silver nanoparticles-poly（carboxybetaine methacrylate） （AgNPs-PCBMA） nanocomposite was prepared on poly（vinylidene fluoride） （PVDF） membrane surface to improve its hydrophilicity and antifouling properties. ...A silver nanoparticles-poly（carboxybetaine methacrylate） （AgNPs-PCBMA） nanocomposite was prepared on poly（vinylidene fluoride） （PVDF） membrane surface to improve its hydrophilicity and antifouling properties. Firstly, the PVDF membranes were grafted by PCBMA via physisorbed free radical grafting technique. Then Ag＋ coordinated to the carbonyl group on PCBMA and subsequently was reduced to silver nanoparticles. The hydrophilicity of the PVDF-g- PCBMA/Ag membrane was enhanced with the increasing fixed degree （FD） of AgNPs, and the original water contact angle of membrane was reduced to 33.97°. Additionally, water flux recovery ratio （FRR） and bovine serum albumin （BSA） rejection ratio of PVDF-g-PCBMA/AgNPs membrane were improved from 52% to 93.32% and 28.12% to 91.12%, respectively. Further, the PVDF-g-PCBMA/AgNPs membranes exhibited the more pronounced inhibition zone. The study demonstrated that compared with pure AgNPs or the PCBMA polymer brush, the synergistic effect of PCBMA and AgNPs made PVDF membranes have better hydrophilicity and anti-bacterial performances.展开更多
A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanoco...A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanocomposite membrane of poly（vinylidene fluoride） （PVDF）/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis （TGA）. Fourier transform infrared attenuated reflection spectroscopy （FTIR-ATR） and X-ray photoelectronic spectroscopy （XPS） characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy （SEM） was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8~ of the PVDF membrane to 61.2~ of the nanocompostie membrane. Bovine serum albumin （BSA） static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-g- PNIPAAm. The maximum BSA adsorption at 40℃ was about 3 times than that at 23 ℃. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.展开更多
Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations...Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations. Therefore adaptive shape control of the mirror is essential to maintain the surface precision and to ensure its working performance. However, researches on modeling and control of membrane mirrors under thermal loads are sparse in open literatures. A 0.2 m diameter scale model of a polyimide membrane mirror is developed in this study. Three Polyvinylidene fluoride(PVDF) patches are laminated on the non-reflective side of the membrane mirror to serve as in-plane actuators. A new mathematical model of the piezoelectric actuated membrane mirror in multiple fields,(i.e., thermal,mechanical, and electrical field) is established, with which dynamic and static behaviors of the mirror can be analyzed.A closed-loop membrane mirror shape control system is set up and a surface shape control method based on an influence function matrix of the mirror is then investigated. Several experiments including surface displacement tracking and thermal deformation alleviation are performed. The deviations range from 15 μm to 20 μm are eliminated within 0.1 s and the residual deformation is controlled to micron level, which demonstrates the effectiveness of the proposed membrane shape control strategy and shows a satisfactory real-time performance. The proposed research provides a technological support and instruction for shape control of optical membrane mirrors.展开更多
Superhydrophobic poly(vinylidene fluoride)(PVDF) membrane incorporated with nanoparticles was applied in membrane distillation to recover water from phenolic rich solution containing surfactant. The membranes coated o...Superhydrophobic poly(vinylidene fluoride)(PVDF) membrane incorporated with nanoparticles was applied in membrane distillation to recover water from phenolic rich solution containing surfactant. The membranes coated on woven support were fabricated using phase inversion with dual bath coagulation and post-modified using silane. The membranes incorporated with TiO_2, SiO_2, or a mixture of TiO_2-SiO_2 nanoparticles achieved the water contact angle higher than 160°. The addition of TiO_2-SiO_2 mixture into PVDF matrix further enhanced the hierarchical roughness of membrane. Hence, PVDF/TiO_2-SiO_2 membrane achieved the highest permeation flux and rejected 99.9% of gallic acid in the feed(100 g/L). PVDF/TiO_2-SiO_2 membrane also maintained a relative flux(J/J0) higher than0.9 after 8 h of operation. Even with the presence of surfactant in phenolic rich solution, PVDF/TiO_2-SiO_2 membrane was able to exhibit relative flux above 0.8. The significant changes on the hydrophobicity and chemical properties of PVDF/TiO_2-SiO_2 membrane due to fouling were not observed after 50 h of static adsorption test.展开更多
A novel method for the surface modification of PVDF porous membranes was introduced. Styrene-（N-（4- hydroxyphenyl） maleimide） alternating copolymer SHMI-Br was blended with PVDF to fabricate SHMI-Br/PVDF membranes...A novel method for the surface modification of PVDF porous membranes was introduced. Styrene-（N-（4- hydroxyphenyl） maleimide） alternating copolymer SHMI-Br was blended with PVDF to fabricate SHMI-Br/PVDF membranes. The C-Br bond on the SHMI-Br/PVDF membrane was served as initial site of ATRP, and P（PEGMA） brush was grafted on the PVDF membrane. Attenuated total reflectance-Fourier transform infrared spectroscopy （ATR/FTIR） was used to prove the P（PEGMA） brushes were successfully grafted onto the SHMI-Br/PVDF membrane surface. Introduction of P（PEGMA） brushes on the PVDF membrane surface enhanced the hydrophilicity effectively. When the PEGMA degree of grafting was 16.7 wt%, the initial contact angle of PVDF membrane decreased from 98° to 42°. The anti-fouling ability of PVDF membrane was improved significantly after P（PEGMA） brush was ~afted. Taking the PEGMA degree of grafting 16.7 wt% as an example, the flux of protein solution was about 151.21 L/（m h） when the pH value of the BSA solution was 4.9. As the pH value was increased to 7.4, the flux was changed to 180.06 L/（m2 h）. However, the protein solution flux of membrane M3 （PEGMA： 0 wt%） was only 73.84 L/（m2 h） and 113.52 L/（m2 h） at pH 4.9 and 7.4, respectively.展开更多
In the present study,nano-sized TiO2 /Al2O3 modified PVDF membranes (MM) were fabricated and utilized for anionic polyacrylamide ( APAM) separation. The results showed that,compared with PVDF membrane (OM) ,the contac...In the present study,nano-sized TiO2 /Al2O3 modified PVDF membranes (MM) were fabricated and utilized for anionic polyacrylamide ( APAM) separation. The results showed that,compared with PVDF membrane (OM) ,the contact angle of MM decreases from 83. 64° to 67. 42°,which indicates the increase of the hydrophilicity of MM. The relative flux (RF) decline curve of this ultrafiltration of APAM in water with time shows an obvious two stage properties. The cake filtration models were used to predict the performance of different time over the complete range of filtration times. All the four cake models could simulate this UF process to a certain extent,and the suitability of the two kinds of membranes was: cake filtration > intermediate pore blocking > standard pore blocking > complete pore blocking models. However,they became more and more unsuited to this process with time extending. Surface and cross-sectional morphology of membrane was investigated by SEM to make an advanced certificate of this UF mechanism.展开更多
Four common types of additives for polymer membrane preparation including organic macromolecule and micromolecule additives, inorganic salts and acids, and the strong non-solvent H2 O were used to prepare poly（vinyli...Four common types of additives for polymer membrane preparation including organic macromolecule and micromolecule additives, inorganic salts and acids, and the strong non-solvent H2 O were used to prepare poly（vinylidene fluoride-co-chlorotrifluoroethylene）（PVDF-CTFE） hydrophobic flat-sheet membranes. Membrane properties including morphology, porosity, hydrophobicity, pore size and pore distribution were investigated, and the permeability was evaluated via direct contact membrane distillation（DCMD） of 3.5 g/L Na Cl solution in a DCMD configuration. Both inorganic and organic micromolecule additives were found to slightly influence membrane hydrophobicity. Polyethylene glycol（PEG）,organic acids, Li Cl, Mg Cl2, and Li Cl/H2 O mixtures were proved to be effective additives to PVDF-CTFE membranes due to their pore-controlling effects and the capacity to improve the properties and performance of the resultant membranes. The occurrence of a pre-gelation process showed that when organic and inorganic micromolecules were added to PVDF-CTFE solution, the resultant membranes presented a high interconnectivity structure. The membrane prepared with dibutyl phthalate（DBP） showed a nonporous surface and symmetrical cross-section. When H2 O and Li Cl/H2 O mixtures were also used as additives, they were beneficial for solid–liquid demixing, especially when Li Cl/H2 O mixed additives were used. The membrane prepared with 5% Li Cl ＋ 2% H2 O achieved a flux of24.53 kg/（m2·hr） with 99.98% salt rejection. This study is expected to offer a reference not only for PVDF-CTFE membrane preparation but also for other polymer membranes.展开更多
Surface-initiated atom transfer radical polymerization （SI-ATRP） was used to tether poly（2-dimethylaminoethyl methacrylate） （PDMAEMA） onto microporous PVDF membranes in order to synthesize membrane adsorbers for...Surface-initiated atom transfer radical polymerization （SI-ATRP） was used to tether poly（2-dimethylaminoethyl methacrylate） （PDMAEMA） onto microporous PVDF membranes in order to synthesize membrane adsorbers for protein adsorption. The alkaline treatment and bromine addition reaction were used to anchor ATRP initiators on membrane surface. Then PDMAEMA was grafted from the membrane surface via SI-ATRP. Fourier transform infrared spectroscopy （FTIR）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM） revealed the chemical composition and surface topography of the PVDF-g-PDMAEMA membrane surfaces. These results showed that PDMAEMA was grafted from the membrane surface successfully and a grafting yield as high as 1500 ~g/cm2 was achieved. The effects of the grafting time and the density of initiators on the static and dynamic binding capacity of bovine serum albumin （BSA） were systematically investigated. Both the static and dynamic binding capacities increase with the bromination and polymerization time. However, the benefits of the initiator density on binding capacities are limited by the graft density of PDMAEMA chains.展开更多
To improve the hydrophilicity and anti-fouling performance in water treatment,both entrapped method and deposited method were used to modify polyvinylidene fluoride(PVDF)porous membrane with composite Al2O3/TiO2 nano-...To improve the hydrophilicity and anti-fouling performance in water treatment,both entrapped method and deposited method were used to modify polyvinylidene fluoride(PVDF)porous membrane with composite Al2O3/TiO2 nano-particles.Neat PVDF membrane was prepared and its property was also compared with that of the modified membranes.Membrane permeation flux and anti-fouling performance were measured using a membrane cell.The contact angle between water and membrane surface was detected in order to denote the membrane hydrophilicity.Membrane morphology and surface structure were examined by atomic-force microscopy(AFM)and scanning electron microscopy(SEM).Experimental results showed that modified membranes had higher permeation fluxes than that of the neat PVDF membrane.The addition of nano-particles altered membrane surface morphology and increased surface roughness.Due to the hydrophilicity of nano-particles,however,the membrane anti-fouling performance was improved instead of worsened.The entrapped membrane exhibited better anti-fouling performance than the deposited membrane and the neat membrane.展开更多
We fabricated the nanofiber composite membranes by impregnating Nafion into the modified polyvinylidene fluoride(PVDF) electrospinning nanofiber mat for proton exchange membrane fuel cells applications.The hydrophobic...We fabricated the nanofiber composite membranes by impregnating Nafion into the modified polyvinylidene fluoride(PVDF) electrospinning nanofiber mat for proton exchange membrane fuel cells applications.The hydrophobic PVDF nanofibers mat became to the hydrophilic state by alkali treatment for the full embedding of Nafion into the PVDF network.The fabricated composite membranes exhibit significantly enhanced thermal stabilities,swelling resistance,and observably improved mechanical property compared to the pristine Nafion membrane.When the content of PVDF nanofiber mat is 15.1wt% in the membrane,the proton conductivity of the nanofiber composite membrane is nearly equal to that of pristine Nafion membrane with the same condition.The experimental results show that the prepared composite membrane can be used as a promising polyelectrolyte membrane for fuel cell applications.展开更多
Although PVDF flat sheet membranes have been widely tested in MD,their synthesis and modifications currently require increased use of green and inexpensive materials.In this study,flat sheet PVDF membranes were synthe...Although PVDF flat sheet membranes have been widely tested in MD,their synthesis and modifications currently require increased use of green and inexpensive materials.In this study,flat sheet PVDF membranes were synthesized using phase inversion and water as the pore former.Remarkably,the water added in the casting solution improved the membrane pore sizes;where the maximum pore size was 0.58μm.Also,the incorporation of f-SiO2NPs in the membrane matrix considerably enhanced the membrane hydrophobicity.Specifically,the membrane contact angles increased from 96°to 153°.Additionally,other parameters investigated were mechanical strength and liquid entry pressure(LEP).The maximum recorded values were 2.26 MPa and 239 kPa,respectively.The modified membranes(i.e.,using water as the pore former and f-SiO2NPs)were the most efficient,showing maximum salt rejection of 99.9%and water flux of 11.6 LMH;thus,indicating their capability to be used as efficient materials for the recovery of high purity water in MD.展开更多
The advancement of direct seawater electrolysis is a significant step towards sustainable hydrogen production,addressing the critical need for renewable energy sources and efficient resource utilization.However,direct...The advancement of direct seawater electrolysis is a significant step towards sustainable hydrogen production,addressing the critical need for renewable energy sources and efficient resource utilization.However,direct seawater electrolysis has to face several challenges posed by the corrosiveness of highly concentrated chloride and the competitive chlorine evolution reaction(ClER).To overcome these issues,we designed a novel NiP_(2)@CoP electrocatalyst on a porous titanium microfiltration(Ti MF)membrane.The obtained bifunctional NiP_(2)@CoP catalyst outperforms the Pt/C and IrO_(2),as evidenced by its low overpotentials of 192 and 425 mV at a current density of 500 mA·cm^(-2) for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in alkaline seawater(1 M KOH+0.5 M NaCl),respectively.Especially,only 231 and 569 mV overpotentials are required at the current density of 1500 mA·cm^(-2) towards HER and OER in alkaline seawater,respectively.More importantly,no ClER was observed,demonstrating its excellent selectivity to OER.The selection of porous Ti MF membrane as an electrode substrate further enhances the performance by providing a robust structure that promotes the fast generation and release of gas bubbles.Our promising outcomes obtained with NiP_(2)@CoP catalysts on Ti MF support,therefore,pave the way for the commercial viability of direct seawater electrolysis technologies at industrial-level current densities.展开更多
Structural regular polyaniline was synthesized via a modified-chemical oxidative polymerization reaction. Highly hydrophilic polyaniline(PANi) and polyaniline-poly(vinylidene fluoride) blend(PANi-PVDF) membranes were ...Structural regular polyaniline was synthesized via a modified-chemical oxidative polymerization reaction. Highly hydrophilic polyaniline(PANi) and polyaniline-poly(vinylidene fluoride) blend(PANi-PVDF) membranes were prepared by solution casting and phase inversion techniques. Both of the mechanical and filtration properties of the membranes depend on the polymer composition and doping level of the blends. The elasticity of the membrane is greatly improved upon introducing poly(vinylidene fluoride) into the blend. The water permeability of the blend membranes is further enhanced when the membranes are doped with hydrochloric acid. The PANi-PVDF blend membranes are capable of recovering metallic gold from the acid/halide leaching streams spontaneous and sustainably, and are promising candidates for wastewater treatments in electronic industries.展开更多
文摘A novel thermally induced graft polymerization technique was used to modify a polyvinylidene fluoride （PVDF） hollow fibre microfiltration membrane. An artificial neural network （ANN） was applied to optimize the prepared condition of the membrane. The optimized dosing of acrylic acid （AA）, acrylamide （AM）, N, N＇- methylenebisacrylamide （NMBA） and potassium persulphate （KSP） designed by ANN was that AA was 40.63 ml/L; AM acted as 6.25 g/L; NMBA was 1.72 g/L and KSP was 1.5 g/L, respectively. The thermal stability of the PVDF modified hollow fibre membrane （PVDF-PAA） was investigated by thermogravimetric （TG） and differential scanning calorimetry （DSC） analysis. The polycrystallinity of the PVDF-PAA membrane was evaluated by X-ray diffraction （XRD） analysis. The complex formation of the modified membrane was ascertained by Fourier transform infrared spectroscopy （FTIR）. The morphology of the PVDF-PAA membrane was studied by environmental scanning electron microscopy （ESEM）. The surface compositions of the membrane were analyzed by X-ray photoelectron spectroscopy （XPS）. The adsorption capacity of Cu^2＋ ion on the PVDF-PAA hollow fibre membrane was also investigated.
基金financially supported by Natural Science Foundation of Ningbo City(2018A610026)Zhejiang Provincial Natural Science Foundation of China for Distinguished Young Scholars(LR20E030002)+1 种基金Ten thousand plan-high level talents special support plan of Zhejiang province,China(ZJWR0108020)Youth Innovation Promotion Association of Chinese Academy of Science(2014258)。
文摘Precluding the excessive lipoproteins from plasma rapidly and effectively is highly needed for biomedical detection and reducing plasma product scrap in blood donation stations.The current centrifugation procedure is high-cost and time-consuming.Herein,we fabricated an anionic microfiltration polyethersulfone(PES)membrane modified by interface swelling and implanting of acrylic acid(AA)for screening out large particle lipoprotein chylomicron(CM)and adsorbing cationic very low-density lipoproteins(VLDL).To improve the separation efficiency,a two-stage filtration through carboxylated polyethersulfone microfiltration membranes with the mean pore size of 0.45 and 0.22μm respectively were conducted.Attenuated total reflection Fourier transform infrared technique(ATR-FTIR),water contact angle(WCA),Zeta potential and scanning electron microscope(SEM)were employed to characterize the modified membrane.To test the effectiveness of this membrane,plasma flux and concentration variation of plasma components were examined to study the purification effectiveness.Furthermore,the hemocompatibility of modified membranes was tested to confirm its practicability on bloodcontacting materials.The carboxylated polyethersulfone microfiltration membrane shows its promising potential application to purify chylous plasma.
文摘Microfiltration membrane technology has been widely used in various industries for solid-liquid separation. However, pore clogging remains a persistent challenge. This study employs (CFD) and discrete element method (DEM) models to enhance our understanding of microfiltration membrane clogging. The models were validated by comparing them to experimental data, demonstrating reasonable consistency. Subsequently, a parametric study was conducted on a cross-flow model, exploring the influence of key parameters on clogging. Findings show that clogging is a complex phenomenon affected by various factors. The mean inlet velocity and transmembrane flux were found to directly impact clogging, while the confinement ratio and cosine of the membrane pore entrance angle had an inverse relationship with it. Two clog types were identified: internal (inside the pore) and external (arching at the pore entrance), with the confinement ratio determining the type. This study introduced a dimensionless number as a quantitative clogging indicator based on transmembrane flux, Reynolds number, filtration time, entrance angle cosine, and confinement ratio. While this hypothesis held true in simulations, future studies should explore variations in clogging indicators, and improved modeling of clogging characteristics. Calibration between numerical and physical times and consideration of particle volume fraction will enhance understanding.
基金financially supported by the National Natural Science Foundation of China(Nos.51103130 and 21004051)Qianjiang Talents Project of Technology Office in Zhejiang Province(No.2013R10070)
文摘Polymerizable ionic liquid copolymer P（MMA-co-BVIm-Br） was synthesized by radical polymerization technique, and characterized by Fourier transform infrared spectrometry （FTIR）, 1H Nuclear magnetic resonance （1H-NMR） and gel permeation chromatography （GPC）. The resulting copolymer was used to prepare poly（vinylidene fluoride） （PVDF） blend membranes via a phase inversion method. The effects of the copolymer on the polymorphism, surface wettability and zeta potential （0 of the blend membranes were investigated by ATR-FTIR, contact angle instrument and zeta potential analyzer. Scanning electron microscopy （SEM and SEM-EDS） was also applied to investigate the morphology and the surface element changes of the fabricated membranes. The results indicated that P（MMA-co-BVIm-Br） copolymer existed on the surface of the membrane which made the blend membrane have a positive surface during the experimental pH range. The copolymer was also in favor of the formation of βcrystal phase in PVDF membranes. The contact angle experiment indicated that P（MMA-co-BVIm-Br） copolymer could switch the wettability of the blend membranes from hydrophilic to hydrophobic by exchanging Br- anion with PF6-. Compared with pure PVDF membranes, the water flux and water recovery flux of the blend membranes were enhanced obviously. The results from the flux recovery ratio （FR） and total fouling ratio （Rt） all suggested that the blend membranes had good anti-fouling properties.
文摘Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified with the polymerizable UV absorber 2-[2-hydroxy-5-[2-(methacryloyloxy)ethyl]phenyl]-2 H-benzotriazole(RUVA-93). The influences of irradiation dose and monomer concentration on the prepared PVDF-g-PRUVA-93 membranes were investigated, and the optimal condition was eventually obtained. The chemical structures of the films were studied by ~1H-NMR, FTIR, and XRD. UV light transmittance and DSC tests were used to characterize the UV-absorbing performance and thermal property of the PVDF films before and after modification. The results proved that the PRUVA-93 side chains were successfully incorporated into the PVDF main chains and the obtained PVDF-g-PRUVA-93 films possessed remarkable UV-absorbing property. The modified membrane made under the optimized experiment condition could completely block the UV light in the range of 200-387 nm. Additionally, the transmittance of the PVDF-g-PRUVA-93 film could be reduced to0.04% in 280-320 nm, where the light irradiation could damage polymer materials most seriously.
基金financially supported by the National Natural Science Foundation of China(Nos.51303028 and 31401609)Test Fund support by Test Center of Fuzhou University
文摘A silver nanoparticles-poly（carboxybetaine methacrylate） （AgNPs-PCBMA） nanocomposite was prepared on poly（vinylidene fluoride） （PVDF） membrane surface to improve its hydrophilicity and antifouling properties. Firstly, the PVDF membranes were grafted by PCBMA via physisorbed free radical grafting technique. Then Ag＋ coordinated to the carbonyl group on PCBMA and subsequently was reduced to silver nanoparticles. The hydrophilicity of the PVDF-g- PCBMA/Ag membrane was enhanced with the increasing fixed degree （FD） of AgNPs, and the original water contact angle of membrane was reduced to 33.97°. Additionally, water flux recovery ratio （FRR） and bovine serum albumin （BSA） rejection ratio of PVDF-g-PCBMA/AgNPs membrane were improved from 52% to 93.32% and 28.12% to 91.12%, respectively. Further, the PVDF-g-PCBMA/AgNPs membranes exhibited the more pronounced inhibition zone. The study demonstrated that compared with pure AgNPs or the PCBMA polymer brush, the synergistic effect of PCBMA and AgNPs made PVDF membranes have better hydrophilicity and anti-bacterial performances.
基金financially supported by the National Natural Science Foundation of China(No.51303028)the Natural Science Foundation of Fujian Province(No.2011J01044)
文摘A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanocomposite membrane of poly（vinylidene fluoride） （PVDF）/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis （TGA）. Fourier transform infrared attenuated reflection spectroscopy （FTIR-ATR） and X-ray photoelectronic spectroscopy （XPS） characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy （SEM） was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8~ of the PVDF membrane to 61.2~ of the nanocompostie membrane. Bovine serum albumin （BSA） static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-g- PNIPAAm. The maximum BSA adsorption at 40℃ was about 3 times than that at 23 ℃. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.
基金supported by the National Natural Science Foundation of China(Grant No.51175103)Self-Planned Task of State Key Laboratory of Robotics and System(HIT)(Grant No.SKLRS201301B)
文摘Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations. Therefore adaptive shape control of the mirror is essential to maintain the surface precision and to ensure its working performance. However, researches on modeling and control of membrane mirrors under thermal loads are sparse in open literatures. A 0.2 m diameter scale model of a polyimide membrane mirror is developed in this study. Three Polyvinylidene fluoride(PVDF) patches are laminated on the non-reflective side of the membrane mirror to serve as in-plane actuators. A new mathematical model of the piezoelectric actuated membrane mirror in multiple fields,(i.e., thermal,mechanical, and electrical field) is established, with which dynamic and static behaviors of the mirror can be analyzed.A closed-loop membrane mirror shape control system is set up and a surface shape control method based on an influence function matrix of the mirror is then investigated. Several experiments including surface displacement tracking and thermal deformation alleviation are performed. The deviations range from 15 μm to 20 μm are eliminated within 0.1 s and the residual deformation is controlled to micron level, which demonstrates the effectiveness of the proposed membrane shape control strategy and shows a satisfactory real-time performance. The proposed research provides a technological support and instruction for shape control of optical membrane mirrors.
基金the Ministry of Education Malaysia for providing financial support via TRGS (203/PJKIMIA/67612002/U124)
文摘Superhydrophobic poly(vinylidene fluoride)(PVDF) membrane incorporated with nanoparticles was applied in membrane distillation to recover water from phenolic rich solution containing surfactant. The membranes coated on woven support were fabricated using phase inversion with dual bath coagulation and post-modified using silane. The membranes incorporated with TiO_2, SiO_2, or a mixture of TiO_2-SiO_2 nanoparticles achieved the water contact angle higher than 160°. The addition of TiO_2-SiO_2 mixture into PVDF matrix further enhanced the hierarchical roughness of membrane. Hence, PVDF/TiO_2-SiO_2 membrane achieved the highest permeation flux and rejected 99.9% of gallic acid in the feed(100 g/L). PVDF/TiO_2-SiO_2 membrane also maintained a relative flux(J/J0) higher than0.9 after 8 h of operation. Even with the presence of surfactant in phenolic rich solution, PVDF/TiO_2-SiO_2 membrane was able to exhibit relative flux above 0.8. The significant changes on the hydrophobicity and chemical properties of PVDF/TiO_2-SiO_2 membrane due to fouling were not observed after 50 h of static adsorption test.
基金financially supported by the Natural Science Foundation of Fujian province (No. 2011J01044)the National Basic Research Program of China (973 Program of China, No. 2009CB623402)+2 种基金Scientific Research Foundation in Fuzhou University (2010-XQ-17, 022284)Opening Research Foundation of Key Laboratory of Biomedical Material in Tianjin City(00801103)the Scientific Major Research Project of Fujian Province (2010NZ0001-1)
文摘A novel method for the surface modification of PVDF porous membranes was introduced. Styrene-（N-（4- hydroxyphenyl） maleimide） alternating copolymer SHMI-Br was blended with PVDF to fabricate SHMI-Br/PVDF membranes. The C-Br bond on the SHMI-Br/PVDF membrane was served as initial site of ATRP, and P（PEGMA） brush was grafted on the PVDF membrane. Attenuated total reflectance-Fourier transform infrared spectroscopy （ATR/FTIR） was used to prove the P（PEGMA） brushes were successfully grafted onto the SHMI-Br/PVDF membrane surface. Introduction of P（PEGMA） brushes on the PVDF membrane surface enhanced the hydrophilicity effectively. When the PEGMA degree of grafting was 16.7 wt%, the initial contact angle of PVDF membrane decreased from 98° to 42°. The anti-fouling ability of PVDF membrane was improved significantly after P（PEGMA） brush was ~afted. Taking the PEGMA degree of grafting 16.7 wt% as an example, the flux of protein solution was about 151.21 L/（m h） when the pH value of the BSA solution was 4.9. As the pH value was increased to 7.4, the flux was changed to 180.06 L/（m2 h）. However, the protein solution flux of membrane M3 （PEGMA： 0 wt%） was only 73.84 L/（m2 h） and 113.52 L/（m2 h） at pH 4.9 and 7.4, respectively.
基金Sponsored by the National Natural Science Foundation of China (Grant No.50978068)International Cooperation Program (Grant No.2010DFA92460)+1 种基金National High Technology Research and Development Program of China (863 Program,Grant No.2008AA06Z304)Tianjin Key Laboratory of Aquatic Science and Technology
文摘In the present study,nano-sized TiO2 /Al2O3 modified PVDF membranes (MM) were fabricated and utilized for anionic polyacrylamide ( APAM) separation. The results showed that,compared with PVDF membrane (OM) ,the contact angle of MM decreases from 83. 64° to 67. 42°,which indicates the increase of the hydrophilicity of MM. The relative flux (RF) decline curve of this ultrafiltration of APAM in water with time shows an obvious two stage properties. The cake filtration models were used to predict the performance of different time over the complete range of filtration times. All the four cake models could simulate this UF process to a certain extent,and the suitability of the two kinds of membranes was: cake filtration > intermediate pore blocking > standard pore blocking > complete pore blocking models. However,they became more and more unsuited to this process with time extending. Surface and cross-sectional morphology of membrane was investigated by SEM to make an advanced certificate of this UF mechanism.
基金Financial support by the National Natural Science Foundation of China (Nos. 51378491, 51578533, 21307149) is also gratefully acknowledged
文摘Four common types of additives for polymer membrane preparation including organic macromolecule and micromolecule additives, inorganic salts and acids, and the strong non-solvent H2 O were used to prepare poly（vinylidene fluoride-co-chlorotrifluoroethylene）（PVDF-CTFE） hydrophobic flat-sheet membranes. Membrane properties including morphology, porosity, hydrophobicity, pore size and pore distribution were investigated, and the permeability was evaluated via direct contact membrane distillation（DCMD） of 3.5 g/L Na Cl solution in a DCMD configuration. Both inorganic and organic micromolecule additives were found to slightly influence membrane hydrophobicity. Polyethylene glycol（PEG）,organic acids, Li Cl, Mg Cl2, and Li Cl/H2 O mixtures were proved to be effective additives to PVDF-CTFE membranes due to their pore-controlling effects and the capacity to improve the properties and performance of the resultant membranes. The occurrence of a pre-gelation process showed that when organic and inorganic micromolecules were added to PVDF-CTFE solution, the resultant membranes presented a high interconnectivity structure. The membrane prepared with dibutyl phthalate（DBP） showed a nonporous surface and symmetrical cross-section. When H2 O and Li Cl/H2 O mixtures were also used as additives, they were beneficial for solid–liquid demixing, especially when Li Cl/H2 O mixed additives were used. The membrane prepared with 5% Li Cl ＋ 2% H2 O achieved a flux of24.53 kg/（m2·hr） with 99.98% salt rejection. This study is expected to offer a reference not only for PVDF-CTFE membrane preparation but also for other polymer membranes.
基金financially supported by the National Natural Science Foundation of China(No.21274108)the National High Technology Research and Development Program of China(No.2012AA03A602)
文摘Surface-initiated atom transfer radical polymerization （SI-ATRP） was used to tether poly（2-dimethylaminoethyl methacrylate） （PDMAEMA） onto microporous PVDF membranes in order to synthesize membrane adsorbers for protein adsorption. The alkaline treatment and bromine addition reaction were used to anchor ATRP initiators on membrane surface. Then PDMAEMA was grafted from the membrane surface via SI-ATRP. Fourier transform infrared spectroscopy （FTIR）, X-ray photoelectron spectroscopy （XPS） and scanning electron microscopy （SEM） revealed the chemical composition and surface topography of the PVDF-g-PDMAEMA membrane surfaces. These results showed that PDMAEMA was grafted from the membrane surface successfully and a grafting yield as high as 1500 ~g/cm2 was achieved. The effects of the grafting time and the density of initiators on the static and dynamic binding capacity of bovine serum albumin （BSA） were systematically investigated. Both the static and dynamic binding capacities increase with the bromination and polymerization time. However, the benefits of the initiator density on binding capacities are limited by the graft density of PDMAEMA chains.
基金Sponsored by the National High Technology Research and Development Program of China(863 Program)(Grant No.2006AA06Z303)the National Natural Science Foundation of China(Grant No.50778050)+2 种基金the Key Projects in the National Science & Technology Pillar Program in the Eleventh Five-year Plan Period(Grant No.2006BAJ08B09)the National Creative Research Groups(Grant No.50821002)the Key Scientific and Technological Project of Heilongjiang Province(Grant No.GB06C20403)
文摘To improve the hydrophilicity and anti-fouling performance in water treatment,both entrapped method and deposited method were used to modify polyvinylidene fluoride(PVDF)porous membrane with composite Al2O3/TiO2 nano-particles.Neat PVDF membrane was prepared and its property was also compared with that of the modified membranes.Membrane permeation flux and anti-fouling performance were measured using a membrane cell.The contact angle between water and membrane surface was detected in order to denote the membrane hydrophilicity.Membrane morphology and surface structure were examined by atomic-force microscopy(AFM)and scanning electron microscopy(SEM).Experimental results showed that modified membranes had higher permeation fluxes than that of the neat PVDF membrane.The addition of nano-particles altered membrane surface morphology and increased surface roughness.Due to the hydrophilicity of nano-particles,however,the membrane anti-fouling performance was improved instead of worsened.The entrapped membrane exhibited better anti-fouling performance than the deposited membrane and the neat membrane.
基金Funded by the National Science Foundation of China(21673167)the Open Project Program of High-Tech Organic Fibers Key Laboratory of Sichuan Province。
文摘We fabricated the nanofiber composite membranes by impregnating Nafion into the modified polyvinylidene fluoride(PVDF) electrospinning nanofiber mat for proton exchange membrane fuel cells applications.The hydrophobic PVDF nanofibers mat became to the hydrophilic state by alkali treatment for the full embedding of Nafion into the PVDF network.The fabricated composite membranes exhibit significantly enhanced thermal stabilities,swelling resistance,and observably improved mechanical property compared to the pristine Nafion membrane.When the content of PVDF nanofiber mat is 15.1wt% in the membrane,the proton conductivity of the nanofiber composite membrane is nearly equal to that of pristine Nafion membrane with the same condition.The experimental results show that the prepared composite membrane can be used as a promising polyelectrolyte membrane for fuel cell applications.
基金The authors would like to acknowledge the South African National Research Foundation for funding this work.
文摘Although PVDF flat sheet membranes have been widely tested in MD,their synthesis and modifications currently require increased use of green and inexpensive materials.In this study,flat sheet PVDF membranes were synthesized using phase inversion and water as the pore former.Remarkably,the water added in the casting solution improved the membrane pore sizes;where the maximum pore size was 0.58μm.Also,the incorporation of f-SiO2NPs in the membrane matrix considerably enhanced the membrane hydrophobicity.Specifically,the membrane contact angles increased from 96°to 153°.Additionally,other parameters investigated were mechanical strength and liquid entry pressure(LEP).The maximum recorded values were 2.26 MPa and 239 kPa,respectively.The modified membranes(i.e.,using water as the pore former and f-SiO2NPs)were the most efficient,showing maximum salt rejection of 99.9%and water flux of 11.6 LMH;thus,indicating their capability to be used as efficient materials for the recovery of high purity water in MD.
基金support of the Natural Science Foundation of Tianjin for Distinguished Young Scholar(No.20JCJQJC00150)Basic Research Program of Jiangsu Province(No.BK20241845)+2 种基金the National Natural Science Foundation of China(No.21872104)Tianjin Research Innovation Project for Postgraduate Students(No.2022BKY135)the National Key Research and Development Program of China(Nos.2020YFA0211003 and 2020YFA0211002).
文摘The advancement of direct seawater electrolysis is a significant step towards sustainable hydrogen production,addressing the critical need for renewable energy sources and efficient resource utilization.However,direct seawater electrolysis has to face several challenges posed by the corrosiveness of highly concentrated chloride and the competitive chlorine evolution reaction(ClER).To overcome these issues,we designed a novel NiP_(2)@CoP electrocatalyst on a porous titanium microfiltration(Ti MF)membrane.The obtained bifunctional NiP_(2)@CoP catalyst outperforms the Pt/C and IrO_(2),as evidenced by its low overpotentials of 192 and 425 mV at a current density of 500 mA·cm^(-2) for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in alkaline seawater(1 M KOH+0.5 M NaCl),respectively.Especially,only 231 and 569 mV overpotentials are required at the current density of 1500 mA·cm^(-2) towards HER and OER in alkaline seawater,respectively.More importantly,no ClER was observed,demonstrating its excellent selectivity to OER.The selection of porous Ti MF membrane as an electrode substrate further enhances the performance by providing a robust structure that promotes the fast generation and release of gas bubbles.Our promising outcomes obtained with NiP_(2)@CoP catalysts on Ti MF support,therefore,pave the way for the commercial viability of direct seawater electrolysis technologies at industrial-level current densities.
基金supported by the Public Welfare Technology Applied Research Projects of Zhejiang Province (2014C33G3220001)the National Natural Science Foundation of China (61674153, 51525103, 61504154, 11474295)+3 种基金the Youth Innovation Promotion Association of the Chinese Academy of SciencesNatural Science Foundation of Zhejiang Province (LR17E020001)Ningbo Science and Technology Innovation Team (2015B11001)Ningbo International Cooperation Projects (2015B11027)
文摘Structural regular polyaniline was synthesized via a modified-chemical oxidative polymerization reaction. Highly hydrophilic polyaniline(PANi) and polyaniline-poly(vinylidene fluoride) blend(PANi-PVDF) membranes were prepared by solution casting and phase inversion techniques. Both of the mechanical and filtration properties of the membranes depend on the polymer composition and doping level of the blends. The elasticity of the membrane is greatly improved upon introducing poly(vinylidene fluoride) into the blend. The water permeability of the blend membranes is further enhanced when the membranes are doped with hydrochloric acid. The PANi-PVDF blend membranes are capable of recovering metallic gold from the acid/halide leaching streams spontaneous and sustainably, and are promising candidates for wastewater treatments in electronic industries.
