In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were ana...In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-wet cycles. By combining in-situ SEM and digital image processing(DIP), the damage evolution process and damage characteristic parameters of each stage were obtained. The experimental results indicate that the hydration and dissolution of minerals can not be a determinant factor in structure damage. The micro-structural damage is due to disintegration of mineral aggregates, leading to changes in the number and size of cracks and pores. The damage degree of specimens is related to its initial structure, and the micro-structural damage intensifies and finally tends to stabilize with cycle times increased.展开更多
The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commer...The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commercial coal-water slurry gasifiers with their corresponding gasification coal samples and the corroded refractory bricks in the slag tapping hole of the gasifier.The slag characteristic,including crystallization and viscosity-temperature of four gasification coal samples were analyzed.The results revealed that the low viscosity slag could lead to more severe damage to refractory bricks.Given the risk of slag crystallization,it is recommended to establish a safe slag tapping temperature range should be set as tICT(initial crystallization temperature)−t_(2.5) when tICT is higher than t_(25).Upon examining interior morphology of these corroded refractory bricks,some cracks were observed within them.The chemical composition of molten slag was analyzed using SEM-EDS.However,XRD results found no spinel containing zirconium in these cracks.This suggests that the emergence of these cracks are mainly attributed to the molten slag penetration and the subsequent reaction with the refractory material.The difference in thermal expansion between the newly formed substances and refractory material is critical in forming these cracks.Furthermore,SEM-EDS analysis was also conducted on the slag-aggregate and the slag-matrix interface.The results reveal that the reduction in Cr_(2)O_(3) content is the earliest characteristic of damage in high chromia refractories.A proposed damage mechanism of refractory brick suggests that the matrix and aggregate of high chromia refractory are initially compromised because of the reduced Cr_(2)O_(3) content.Subsequently,the molten slag penetrates the interior of the refractory brick,forming new substances,leading to damage caused by the difference in thermal expansion between the new substances and the refractory brick.Understanding and preventing the reduction of Cr_(2)O_(3) content is vital to prolonging the service life of refractory brick in the slag tapping hole of the gasifier based on this damage mechanism.展开更多
In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicti...In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.展开更多
To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests ...To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.展开更多
To investigate the long-term stability of soft-hard interbedded rock masses with initial damage induced by earthquakes and periodic drying and wetting,this study prepared samples with different initial damage through ...To investigate the long-term stability of soft-hard interbedded rock masses with initial damage induced by earthquakes and periodic drying and wetting,this study prepared samples with different initial damage through cyclic loading and unloading(CLU)experiments followed by cyclic drying and wetting(CDW)experiments,and finally conducted creep experiments.The study analyzed the effects of initial damage on creep mechanical behavior,crack evolution,and explored failure precursor information,revealing the damage failure mechanisms.The results show that the structural characteristics of the rock mass control its macroscopic failure mode.Initial damage promotes microcrack development,influences the fracture mode,and increases the proportion of high-frequency(200−280 kHz)acoustic emission events during creep.Meanwhile,initial damage exacerbates creep characteristics,increasing the creep rate,shortening total creep failure time,and reducing long-term strength.The damage failure is attributed to:the generation of internal cracks and pores in the rock caused by CLU;mineral hydrolysis and expansion-contraction due to CDW,resulting in weakened intergranular cementation;and full development of cracks and pores under creep stress.Additionally,the deformation difference coefficient and the coefficient of variation of RA/AF values can serve as precursor indicators for creep failure.展开更多
Background:Human skin is affected by ultraviolet rays on a daily basis,and excessive ultraviolet radiation(UVR)can lead to sunburn erythema,tanning,photoaging,and skin tumors.The combination of Astragali Radix(AR)and ...Background:Human skin is affected by ultraviolet rays on a daily basis,and excessive ultraviolet radiation(UVR)can lead to sunburn erythema,tanning,photoaging,and skin tumors.The combination of Astragali Radix(AR)and Anemarrhenae Rhizoma(AAR)is a common pairing in traditional Chinese medicine(TCM).According to earlier studies,they possess properties capable of alleviating the adverse impacts of UVR on the skin.However,the specific actions and underlying mechanisms require further investigation.The study aims to analyze the efficacy of AR-AAR in preventing UVR-induced skin damage and to clarify the associated molecular mechanisms.Methods:Potential signaling pathways by which AR and AAR may protect against UVR-induced skin damage were identified with network pharmacology,molecular docking techniques and molecular dynamics(MD)simulation.Except the normal group,the back skin of SD rats was exposed to 1.1 mW/cm^(2) UVA combined with 0.1 mW/cm^(2) UVB daily,and the UVR skin damage model was established.Morphological features of skin tissues of different groups were discovered through Hematoxylin and Eosin(HE)staining,Masson staining,Weigert staining.ELISA was utilized to measure the levels of reactive oxygen species(ROS),Interleukin 6(IL-6),Interleukin 1β(IL-1β)and Tumor necrosis factos-α(TNF-α)in skin tissues.RT-PCR and Western blot were employed to quantify the mRNA and protein contents of PI3K,AKT,and MMP-9.Results:Network pharmacology analysis predicts that AR-AAR may improve skin damage induced by UVR through the PI3K/AKT signaling pathway.Histological staining shows that AR-AAR can significantly reduce inflammatory infiltration and fibrosis in damaged skin.Treatment with AR-AAR(2:1)significantly reduced the expression levels of IL-1β,IL-6,TNF-αand ROS in UVR-damaged rat skin.After treatment with AR-AAR(2:1),not only did the relative mRNA expression levels of PI3K and AKT and the protein expression levels of PI3K,AKT,P-PI3K,and P-AKT increase,but the mRNA and protein expression levels of MMP-9 decreased.Conclusion:The study indicate that the AR-AAR combination and its active components may mitigate UVR skin damage by modulating the PI3K/AKT signaling pathway.展开更多
The stator of the maglev track plays a crucial role in the operation of the maglev system.Currently,the efficiency of maglev track inspection is limited by several factors,including the large span of elevated structur...The stator of the maglev track plays a crucial role in the operation of the maglev system.Currently,the efficiency of maglev track inspection is limited by several factors,including the large span of elevated structures,manual visual inspection,short inspection window times,and limited GPS positioning accuracy.To address these issues,this paper proposes a deep learning-based method for detecting and locating stator surface damage.This study establishes a maglev track stator surface image dataset,trains different object detection models,and compares their performance.Ultimately,YOLO and ByteTrack object tracking algorithms were chosen as the basic framework and enhanced to achieve automatic identification of high-speed maglev track stator surface damage images and track and count stator surface localization feature images.By matching the identified damaged images with their corresponding stator segment and beam segment sequence numbers,the location of the damage is pinpointed to the corresponding stator segment,enabling rapid and accurate identification and localization of complex damage to the maglev track stator surface.展开更多
The concept of Damage Control Surgery(DCS)emphasizes prioritizing hemorrhage control,preventing hypothermia,correcting coagulopathy,and acidosis in trauma treatment.The application of the DCS concept in trauma treatme...The concept of Damage Control Surgery(DCS)emphasizes prioritizing hemorrhage control,preventing hypothermia,correcting coagulopathy,and acidosis in trauma treatment.The application of the DCS concept in trauma treatment at grassroots hospitals faces numerous challenges such as limited resources,high technical difficulty,and insufficient multidisciplinary collaboration.Therefore,DCS strategies need to be adapted to simplified processes to create conditions for subsequent treatment.This paper retrieves relevant literature to discuss the proposal,promotion,and application of the DCS concept,aiming to provide evidence-based basis for optimizing trauma treatment outcomes at grassroots hospitals.展开更多
Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical...Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.展开更多
Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction...Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.展开更多
Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is partic...Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.展开更多
Investigating the damage evolution of surrounding rock under thermal shock cycles is crucial for ensuring the stability of engineering rock masses.This study performed Brazilian splitting tests on granite specimens un...Investigating the damage evolution of surrounding rock under thermal shock cycles is crucial for ensuring the stability of engineering rock masses.This study performed Brazilian splitting tests on granite specimens under varying temperature and cycle conditions,employing acoustic emission monitoring,digital image correlation,and three-dimensional scanning technology.A systematic analysis was conducted on the patterns of damage evolution,failure precursor,and response mechanisms under combined thermal and cyclic loading.Experimental results show that both P-wave velocity and tensile strength degrade significantly with increasing temperature and cycle count,with temperature having a more pronounced effect than cycle count.Notably,damage evolution exhibits a dual-threshold behavior in which degradation accelerates markedly above 400℃ and stabilizes after 5 thermal cycles.Fracture surfaces evolve from initially planar to rugged morphologies,with peak-valley height differences at 600℃ being approximately three times greater than those at 200℃.Furthermore,based on acoustic emission energy entropy analysis,we introduce a novel failure precursor indicator where the sustained increase and critical surge in average entropy serve as reliable early-warning signals for impending rock failure.These findings establish a solid theoretical basis and practical methodology for damage assessment and instability early-warning systems in high-temperature rock engineering.展开更多
Understanding the deterioration behaviors and mechanisms of rocks under thermo-hydromechanical(THM)interactions is crucial for mitigating slope instability.In this study,the physicomechanical properties of silty mudst...Understanding the deterioration behaviors and mechanisms of rocks under thermo-hydromechanical(THM)interactions is crucial for mitigating slope instability.In this study,the physicomechanical properties of silty mudstone subjected to THM interactions were investigated by triaxial tests.The underlying micro-mechanisms were revealed using microscopic tests.The triaxial test results indicate that the strength parameters of silty mudstone decrease by 89.50%(deformation modulus),78.15%(peak strength),70.58%(cohesion),and 48.65%(friction angle)under 16 THM cycles,a load of 300 kPa,and alternating between 0℃water immersion and 60℃drying.The SEM test results indicate that the deterioration of silty mudstone strength primarily results from hydrothermal-expansion softening and cracking driven by the TLHM interactions.The specimens manifest shear failure under confining pressure exceeding 140 kPa.Furthermore,a new constitutive model considering hydrothermalexpansion strain and non-linear deformation characteristics was developed.The discrepancy between the experimentally measured peak strength and the damage constitutive model prediction remains below 5%.The proposed model is verified to be in satisfactory agreement with the experimental results.The self-designed THM apparatus overcomes the limitations of traditional investigations,enabling simultaneous consideration of thermal,hydraulic,and mechanical interactions.展开更多
As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding...As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding data dependency and model interpretability.However,it still faces challenges in modeling complexity,simulation accuracy,and discrepancies between real and virtual features.This study proposes a balanced fidelity digital twin for structural damage monitoring based on Lamb wave multilevel feature enhancement and adaptive space interaction.Firstly,multilevel refined features are extracted from few-shot guided wave signals obtained in physical and digital space,and the adversarial synthetic balancing algorithm is proposed for feature enhancement.Additionally,the learning phase of the damage monitoring model based on the feature-mapping convolutional network is driven by virtual samples of readily accessible balanced fidelity in digital space.To reduce the feature distributional difference between the two spaces,an interactive transfer approach is introduced to establish a shared feature digital twin space.Overall,this study provides a feasible technique to enhance the accessibility and generalizability of digital twins for real engineering structures.展开更多
Rock damage significantly affects coupled thermo-hydro-mechanical(THM)behavior in deep geothermal exploitation through changing thermal and hydrological properties of rocks.For this,a thermo-hydro-mechanical-damage(TH...Rock damage significantly affects coupled thermo-hydro-mechanical(THM)behavior in deep geothermal exploitation through changing thermal and hydrological properties of rocks.For this,a thermo-hydro-mechanical-damage(THMD)coupled model was developed to describe the coupling between rock damage and mechanical,fluid flow and heat transfer fields.The model considers rock heterogeneity,and incorporates the Mohr-Coulomb failure criterion and the maximum tensile stress criterion to evaluate shear and tensile damage.This numerical modeling methodology was first verified against analytical solutions and experimental results,and was then used to simulate the THMD coupling behavior in deep geothermal exploitation.A coupled numerical model was set up to simulate the geothermal fluids extraction and re-injection process in a reservoir at 1 km depth over a 7-year period.Rock damage was found to accelerate the propagation of cold fronts away from the injection well,and have a distinct effect on the performance of geothermal exploitation.When the rock damage was considered,the field injectivity increases by 8.4 times,the range of cooled regions increases by 18.6 times,and the vertical deformation changes by 1.2 times after 7 years of geothermal operations,compared to the scenario where it was not considered.Parametric studies have suggested that thermal contraction dominates the rock damage evolution,and that thermal-induced rock damage only occurs at a sufficiently large temperature difference between fluids injected and the reservoir.This work underscores the importance of accurately accounting for the damage effect on reservoir response during fluid injection activities that cause significant cooling of reservoir rocks.展开更多
Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage....Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage.Understanding the damage characteristics in soaked sandstones is essential for ensuring the stability and longevity of these energy storage systems.This study involved multi-stage cyclic loading tests conducted on soaked sandstone to explore the damage evolution throughout the loading process.The findingsreveal several important insights:(1)The plastic hysteresis loops observed during multi-stage cyclic loading evolved from dense to sparse.An increase in stress level led to greater damage in the rock,as evidenced by an increase in accumulated peak/plastic strains.(2)Energy density and stress level are related by quadratic polynomial relationships.The elastic and dissipated energy densities are related by a linear law.The average energy storage coefficientdecreased by up to 24.1%with increasing stress amplitude,reflectingchanges in energy dynamics within the samples.(3)AE counts,amplitude,and frequency provided critical insights into rock damage and fracture patterns.The greater the loading rate and stress amplitude,the lower the proportion of high-amplitude,high-peak frequency,and shear-type fractures.Increasing stress amplitude caused a maximum 16.63%reduction in the AE bvalue,indicating shifts in fracture behavior under varying stress conditions.(4)The increase in loading rate and stress amplitude promotes the transformation of micropores and mesopores to macropores/microcracks.(5)Damage variables,definedin terms of cumulative dissipation energy,aligned closely with the fatigue damage model under multi-stage cyclic loading.Accelerated damage primarily occurred during the finalstages of fatigue loading,highlighting critical periods in the degradation of soaked sandstones.This study can offer guidance for designing operational parameters for energy storage geological bodies dominated by soaked sandstones.展开更多
Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the ten...Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the tensile stress in the area has exceeded the tensile strength of the soil,leading to local instability.To explore the impact of tensile failure behavior on the stability and failure modes of reservoir landslides,the Huangtupo Riverside Slump#1 is taken as a case study.By considering local tensile failure,potential tensile cracks are incorporated into the analysis via the limit equilibrium method and reliability theory.The reliability of landslides under different tensile failure scenarios is quantified.Strain-softening characteristics of the soil are combined to further analyze the failure transmission path of the landslide.Finally,these potential failure modes were validated through physical model tests.The results show that cracks developing at rear positions reduce the stability of the slope and increase the probability of instability.During the destruction process,retrogressive failures with multiple sliding surfaces are likely to occur.However,tensile failure at the forefront reduces the likelihood of an individual slide mass descending.Progressive failure results in both regular and skip transmission patterns.Additionally,cracks and water level changes can also lead to shifts in the positions of the most dangerous blocks.Therefore,in practical landslide analysis and prevention,it is necessary to consider local tensile damage and identify potential tensile crack locations in advance to optimize prevention measures and accurately evaluate landslide risk.展开更多
This study investigated the effects of periodic high-frequency stress disturbances on the creep behavior of sandstone and analyzed the microstructural changes using nuclear magnetic resonance(NMR)technology.High-frequ...This study investigated the effects of periodic high-frequency stress disturbances on the creep behavior of sandstone and analyzed the microstructural changes using nuclear magnetic resonance(NMR)technology.High-frequency disturbance creep experiments were conducted on sandstone under different disturbance frequencies,disturbance cycles and loading stresses,and the following findings were obtained.Firstly,with the increase of loading stress and disturbance cycles,the total porosity increments,and damage value of sandstone increase,while the fractal dimension of sandstone pore structure presents the opposite trend.Secondly,during the disturbance creep process,the volumes of all three types of pores increase,but the proportion of micropores(T_(2)<10 ms)decreases,while the proportion of mesopores(10 ms<T_(2)<100 ms)and macropores(T_(2)>100 ms)increases.Thirdly,the fractal dimension difference has a good linear relationship with the damage,strain and porosity increment of sandstone during the disturbance creep process.Finally,the higher the disturbance frequency,the smaller the creep strain and creep strain rate during the steady-state creep stage.The study offers valuable theoretical insights for understanding rock creep behavior in complex stress environments.展开更多
Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simula...Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simulations to explore the CSRO effect on the generation and evolution behaviors of irradiation defects.The results demonstrate that CSRO can suppress the formation of Frenkel pairs in TiVTaNb HEAs,with the suppression effect becoming more pronounced as the degree of CSRO increases.CSRO can change the types of interstitial defects generated during cascade collisions.Specifically,as the degree of CSRO increases,the proportion of Ti-related interstitials shows a marked enhancement,primarily evidenced by a significant rise in Ti–Ti dumbbells accompanied by a corresponding decrease in Ti–V dumbbells.CSRO exhibits negligible influence on defect clustering and the nucleation and evolution of dislocation loops.Regardless of CSRO conditions,TiVTaNb HEAs preserve exceptional radiation tolerance throughout the cascade damage process,suggesting that the intrinsic properties of this multi-principal element system dominate its radiation response.These findings provide fundamental insights into the CSRO effect on defect formation and evolution behaviors in HEAs,which may provide new design strategies for high-entropy alloys.展开更多
The interrupted fatigue test method was utilized to investigate the damage evolution mechanism of the notch high-cycle fatigue(NHCF)in Ti-55531 alloy with a multilevel lamellar microstructure.The results reveal that s...The interrupted fatigue test method was utilized to investigate the damage evolution mechanism of the notch high-cycle fatigue(NHCF)in Ti-55531 alloy with a multilevel lamellar microstructure.The results reveal that significant microvoids and microcracks predominantly initiate at α/β interfaces under various notch root radii(R).Notably,even under larger R(0.75 mm),mutual interactions of stacking faults(SFs)−deformation twins,twins−twins,and SFs−SFs are observed.Furthermore,with decreasing R(0.34 and 0.14 mm),the volume fraction of SFs escalates significantly and twins are almost absent.Moreover,activated prismatic slip system decreases with a decrease in Schmidt factor and with the further decrease in R.Finally,strain localization near α/β interfaces contributes to the initiation of fatigue microcracks.展开更多
基金Funded by the National Natural Science Foundation of China(No.51574201)the Research and Innovation Team of Provincial U niversities in Sichuan(18TD0014)the Excellent Youth Foundat ion of Sichuan Scientific Committee(2019JDJQ0037)
文摘In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-wet cycles. By combining in-situ SEM and digital image processing(DIP), the damage evolution process and damage characteristic parameters of each stage were obtained. The experimental results indicate that the hydration and dissolution of minerals can not be a determinant factor in structure damage. The micro-structural damage is due to disintegration of mineral aggregates, leading to changes in the number and size of cracks and pores. The damage degree of specimens is related to its initial structure, and the micro-structural damage intensifies and finally tends to stabilize with cycle times increased.
基金Supported by Carbon Neutrality and Energy System Transformation (CNEST) ProgramScience and Technology Innovation Project of CHN Energy (GJNY-24-26)。
文摘The service life of refractory brick in the slag tapping hole of gasifiers is a significant concern for long-term and stable operation.This study examined the damage mechanism of high chromia refractory of four commercial coal-water slurry gasifiers with their corresponding gasification coal samples and the corroded refractory bricks in the slag tapping hole of the gasifier.The slag characteristic,including crystallization and viscosity-temperature of four gasification coal samples were analyzed.The results revealed that the low viscosity slag could lead to more severe damage to refractory bricks.Given the risk of slag crystallization,it is recommended to establish a safe slag tapping temperature range should be set as tICT(initial crystallization temperature)−t_(2.5) when tICT is higher than t_(25).Upon examining interior morphology of these corroded refractory bricks,some cracks were observed within them.The chemical composition of molten slag was analyzed using SEM-EDS.However,XRD results found no spinel containing zirconium in these cracks.This suggests that the emergence of these cracks are mainly attributed to the molten slag penetration and the subsequent reaction with the refractory material.The difference in thermal expansion between the newly formed substances and refractory material is critical in forming these cracks.Furthermore,SEM-EDS analysis was also conducted on the slag-aggregate and the slag-matrix interface.The results reveal that the reduction in Cr_(2)O_(3) content is the earliest characteristic of damage in high chromia refractories.A proposed damage mechanism of refractory brick suggests that the matrix and aggregate of high chromia refractory are initially compromised because of the reduced Cr_(2)O_(3) content.Subsequently,the molten slag penetrates the interior of the refractory brick,forming new substances,leading to damage caused by the difference in thermal expansion between the new substances and the refractory brick.Understanding and preventing the reduction of Cr_(2)O_(3) content is vital to prolonging the service life of refractory brick in the slag tapping hole of the gasifier based on this damage mechanism.
基金funded by the National Natural Science Foundation of China(Nos.52004098,U24B2041,and 52274079)the Key Research and Development Program of Henan Province(No.251111320400)+1 种基金the Key Research Project Plan for Higher Education Institutions in Henan Province(Nos.24A570006 and 25A570002)the Scientific and Technological Research Project in Henan Province(No.242102320061).
文摘In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.
基金supported by the Yunnan Province Science and Technology Plan Project(No.202403AA080001-4)the Key Research and Development Project of Guangxi,China(No.guikeAB24010144)the National Key Research and Development Project of China(Nos.2021YFB3901402 and 2018YFC1504802)。
文摘To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.
基金Project(U22A20603)supported by the National Natural Science Foundation of ChinaProject(2023YFC3008300)supported by the National Key Research and Development Program of China。
文摘To investigate the long-term stability of soft-hard interbedded rock masses with initial damage induced by earthquakes and periodic drying and wetting,this study prepared samples with different initial damage through cyclic loading and unloading(CLU)experiments followed by cyclic drying and wetting(CDW)experiments,and finally conducted creep experiments.The study analyzed the effects of initial damage on creep mechanical behavior,crack evolution,and explored failure precursor information,revealing the damage failure mechanisms.The results show that the structural characteristics of the rock mass control its macroscopic failure mode.Initial damage promotes microcrack development,influences the fracture mode,and increases the proportion of high-frequency(200−280 kHz)acoustic emission events during creep.Meanwhile,initial damage exacerbates creep characteristics,increasing the creep rate,shortening total creep failure time,and reducing long-term strength.The damage failure is attributed to:the generation of internal cracks and pores in the rock caused by CLU;mineral hydrolysis and expansion-contraction due to CDW,resulting in weakened intergranular cementation;and full development of cracks and pores under creep stress.Additionally,the deformation difference coefficient and the coefficient of variation of RA/AF values can serve as precursor indicators for creep failure.
基金supported by the Shaanxi Qinchuang Yuan“scientist+engineer”team construction(No.2023KXJ-080)Shaanxi Chiral Drug Engineering Technology Research Center(Department of Science and Technology of Shaanxi Province.No.[2011]-251).
文摘Background:Human skin is affected by ultraviolet rays on a daily basis,and excessive ultraviolet radiation(UVR)can lead to sunburn erythema,tanning,photoaging,and skin tumors.The combination of Astragali Radix(AR)and Anemarrhenae Rhizoma(AAR)is a common pairing in traditional Chinese medicine(TCM).According to earlier studies,they possess properties capable of alleviating the adverse impacts of UVR on the skin.However,the specific actions and underlying mechanisms require further investigation.The study aims to analyze the efficacy of AR-AAR in preventing UVR-induced skin damage and to clarify the associated molecular mechanisms.Methods:Potential signaling pathways by which AR and AAR may protect against UVR-induced skin damage were identified with network pharmacology,molecular docking techniques and molecular dynamics(MD)simulation.Except the normal group,the back skin of SD rats was exposed to 1.1 mW/cm^(2) UVA combined with 0.1 mW/cm^(2) UVB daily,and the UVR skin damage model was established.Morphological features of skin tissues of different groups were discovered through Hematoxylin and Eosin(HE)staining,Masson staining,Weigert staining.ELISA was utilized to measure the levels of reactive oxygen species(ROS),Interleukin 6(IL-6),Interleukin 1β(IL-1β)and Tumor necrosis factos-α(TNF-α)in skin tissues.RT-PCR and Western blot were employed to quantify the mRNA and protein contents of PI3K,AKT,and MMP-9.Results:Network pharmacology analysis predicts that AR-AAR may improve skin damage induced by UVR through the PI3K/AKT signaling pathway.Histological staining shows that AR-AAR can significantly reduce inflammatory infiltration and fibrosis in damaged skin.Treatment with AR-AAR(2:1)significantly reduced the expression levels of IL-1β,IL-6,TNF-αand ROS in UVR-damaged rat skin.After treatment with AR-AAR(2:1),not only did the relative mRNA expression levels of PI3K and AKT and the protein expression levels of PI3K,AKT,P-PI3K,and P-AKT increase,but the mRNA and protein expression levels of MMP-9 decreased.Conclusion:The study indicate that the AR-AAR combination and its active components may mitigate UVR skin damage by modulating the PI3K/AKT signaling pathway.
基金supported in part by the National Natural Science Foundation of China under Grant 52432012in part by the Shanghai Science and Technology Project with 25ZR1402508。
文摘The stator of the maglev track plays a crucial role in the operation of the maglev system.Currently,the efficiency of maglev track inspection is limited by several factors,including the large span of elevated structures,manual visual inspection,short inspection window times,and limited GPS positioning accuracy.To address these issues,this paper proposes a deep learning-based method for detecting and locating stator surface damage.This study establishes a maglev track stator surface image dataset,trains different object detection models,and compares their performance.Ultimately,YOLO and ByteTrack object tracking algorithms were chosen as the basic framework and enhanced to achieve automatic identification of high-speed maglev track stator surface damage images and track and count stator surface localization feature images.By matching the identified damaged images with their corresponding stator segment and beam segment sequence numbers,the location of the damage is pinpointed to the corresponding stator segment,enabling rapid and accurate identification and localization of complex damage to the maglev track stator surface.
文摘The concept of Damage Control Surgery(DCS)emphasizes prioritizing hemorrhage control,preventing hypothermia,correcting coagulopathy,and acidosis in trauma treatment.The application of the DCS concept in trauma treatment at grassroots hospitals faces numerous challenges such as limited resources,high technical difficulty,and insufficient multidisciplinary collaboration.Therefore,DCS strategies need to be adapted to simplified processes to create conditions for subsequent treatment.This paper retrieves relevant literature to discuss the proposal,promotion,and application of the DCS concept,aiming to provide evidence-based basis for optimizing trauma treatment outcomes at grassroots hospitals.
基金support from the Joint Funds of the National Natural Science Foundation of China(Grant No.U23A2060)the National Natural Science Foundation of China(Grant Nos.42177143 and 52474150).
文摘Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.
基金funded by the National Natural Science Foundation of China(Nos.52209130 and 52379100)Shandong Provincial Natural Science Foundation(No.ZR2024ME112).
文摘Thermal-mechanical damage and deformation at the interface between shotcrete linings and the surrounding rock of tunnels under high-temperature and variable-temperature conditions are critical to the safe construction and operation of tunnel engineering.This study investigated the thermo-mechanical damage behavior of the composite interface between alkali-resistant glass fiber-reinforced concrete(ARGFRC)and granite,focusing on a plateau railway tunnel.Laboratory triaxial tests,laser scanning,XRD analysis,numerical simulations,and theoretical analyses were employed to investigate how different initial curing temperatures and joint roughness coefficient(JRC)influence interfacial damage behavior.The results indicate that an increase in interface roughness exacerbates the structural damage at the interface.At a JRC of 19.9 and a temperature of 70℃,crack initiation in granite was notably restrained when the confining pressure rose from 7 MPa to 10 MPa.Roughness-induced stress distribution at the interface was notably altered,although this effect became less pronounced under high confining pressure conditions.Additionally,during high-temperature curing,thermal stress concentration at the tips of micro-convex protrusions on the granite surface induced microcracks in the adjacent ARGFRC matrix,followed by deformation.These findings provide practical guidelines for designing concrete support systems to ensure tunnel structural safety in high-altitude regions with harsh thermal environments.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC3005603-01)the Natural Science Foundation Science of Anhui Province(Grant No.2308085US02).
文摘Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.
基金supported by National Natural Science Foundation of China (Nos.52264006,52364004,and 52464005)the Guizhou Provincial Science and Technology Foundation (No.GCC[2022]005-1)。
文摘Investigating the damage evolution of surrounding rock under thermal shock cycles is crucial for ensuring the stability of engineering rock masses.This study performed Brazilian splitting tests on granite specimens under varying temperature and cycle conditions,employing acoustic emission monitoring,digital image correlation,and three-dimensional scanning technology.A systematic analysis was conducted on the patterns of damage evolution,failure precursor,and response mechanisms under combined thermal and cyclic loading.Experimental results show that both P-wave velocity and tensile strength degrade significantly with increasing temperature and cycle count,with temperature having a more pronounced effect than cycle count.Notably,damage evolution exhibits a dual-threshold behavior in which degradation accelerates markedly above 400℃ and stabilizes after 5 thermal cycles.Fracture surfaces evolve from initially planar to rugged morphologies,with peak-valley height differences at 600℃ being approximately three times greater than those at 200℃.Furthermore,based on acoustic emission energy entropy analysis,we introduce a novel failure precursor indicator where the sustained increase and critical surge in average entropy serve as reliable early-warning signals for impending rock failure.These findings establish a solid theoretical basis and practical methodology for damage assessment and instability early-warning systems in high-temperature rock engineering.
基金supported by“the National Natural Science Foundation of China(52378440,52078067,52078066,42477143,52408458)the Key Science and Technology Program in the Transportation Industry(2022-MS1-032,2022-MS5-125)+4 种基金the Natural Science Foundation of Hunan Province(2023JJ10045)the Outstanding Innovative Youth Training Program of Changsha City(kq2305023)Scientific Research Foundation of Hunan Provincial Education Department(24B0292)Water Resources Science and Technology Project of Hunan Province(XSKJ2023059-41)the Guangxi Key Research and Development Program(AB23075184)。
文摘Understanding the deterioration behaviors and mechanisms of rocks under thermo-hydromechanical(THM)interactions is crucial for mitigating slope instability.In this study,the physicomechanical properties of silty mudstone subjected to THM interactions were investigated by triaxial tests.The underlying micro-mechanisms were revealed using microscopic tests.The triaxial test results indicate that the strength parameters of silty mudstone decrease by 89.50%(deformation modulus),78.15%(peak strength),70.58%(cohesion),and 48.65%(friction angle)under 16 THM cycles,a load of 300 kPa,and alternating between 0℃water immersion and 60℃drying.The SEM test results indicate that the deterioration of silty mudstone strength primarily results from hydrothermal-expansion softening and cracking driven by the TLHM interactions.The specimens manifest shear failure under confining pressure exceeding 140 kPa.Furthermore,a new constitutive model considering hydrothermalexpansion strain and non-linear deformation characteristics was developed.The discrepancy between the experimentally measured peak strength and the damage constitutive model prediction remains below 5%.The proposed model is verified to be in satisfactory agreement with the experimental results.The self-designed THM apparatus overcomes the limitations of traditional investigations,enabling simultaneous consideration of thermal,hydraulic,and mechanical interactions.
基金supported by the National Natural Science Foundation of China(Grant Nos.No.U2141245,11972314,11472308)。
文摘As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding data dependency and model interpretability.However,it still faces challenges in modeling complexity,simulation accuracy,and discrepancies between real and virtual features.This study proposes a balanced fidelity digital twin for structural damage monitoring based on Lamb wave multilevel feature enhancement and adaptive space interaction.Firstly,multilevel refined features are extracted from few-shot guided wave signals obtained in physical and digital space,and the adversarial synthetic balancing algorithm is proposed for feature enhancement.Additionally,the learning phase of the damage monitoring model based on the feature-mapping convolutional network is driven by virtual samples of readily accessible balanced fidelity in digital space.To reduce the feature distributional difference between the two spaces,an interactive transfer approach is introduced to establish a shared feature digital twin space.Overall,this study provides a feasible technique to enhance the accessibility and generalizability of digital twins for real engineering structures.
基金funded by the Major National Science and Technology Project for Deep Earth of China(Grant No.2024ZD1003805)the National Natural Science Foundation of China(Grant Nos.52311530070 and 52004015).
文摘Rock damage significantly affects coupled thermo-hydro-mechanical(THM)behavior in deep geothermal exploitation through changing thermal and hydrological properties of rocks.For this,a thermo-hydro-mechanical-damage(THMD)coupled model was developed to describe the coupling between rock damage and mechanical,fluid flow and heat transfer fields.The model considers rock heterogeneity,and incorporates the Mohr-Coulomb failure criterion and the maximum tensile stress criterion to evaluate shear and tensile damage.This numerical modeling methodology was first verified against analytical solutions and experimental results,and was then used to simulate the THMD coupling behavior in deep geothermal exploitation.A coupled numerical model was set up to simulate the geothermal fluids extraction and re-injection process in a reservoir at 1 km depth over a 7-year period.Rock damage was found to accelerate the propagation of cold fronts away from the injection well,and have a distinct effect on the performance of geothermal exploitation.When the rock damage was considered,the field injectivity increases by 8.4 times,the range of cooled regions increases by 18.6 times,and the vertical deformation changes by 1.2 times after 7 years of geothermal operations,compared to the scenario where it was not considered.Parametric studies have suggested that thermal contraction dominates the rock damage evolution,and that thermal-induced rock damage only occurs at a sufficiently large temperature difference between fluids injected and the reservoir.This work underscores the importance of accurately accounting for the damage effect on reservoir response during fluid injection activities that cause significant cooling of reservoir rocks.
基金sponsored by National Natural Science Foundation of China(Grant Nos.U22B6003 and 52304070)Key Laboratory of Geomechanics and Geotechnical Engineering Safety,Chinese Academy of Sciences(Grant No.SKLGME-JBGS2404).
文摘Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage.Understanding the damage characteristics in soaked sandstones is essential for ensuring the stability and longevity of these energy storage systems.This study involved multi-stage cyclic loading tests conducted on soaked sandstone to explore the damage evolution throughout the loading process.The findingsreveal several important insights:(1)The plastic hysteresis loops observed during multi-stage cyclic loading evolved from dense to sparse.An increase in stress level led to greater damage in the rock,as evidenced by an increase in accumulated peak/plastic strains.(2)Energy density and stress level are related by quadratic polynomial relationships.The elastic and dissipated energy densities are related by a linear law.The average energy storage coefficientdecreased by up to 24.1%with increasing stress amplitude,reflectingchanges in energy dynamics within the samples.(3)AE counts,amplitude,and frequency provided critical insights into rock damage and fracture patterns.The greater the loading rate and stress amplitude,the lower the proportion of high-amplitude,high-peak frequency,and shear-type fractures.Increasing stress amplitude caused a maximum 16.63%reduction in the AE bvalue,indicating shifts in fracture behavior under varying stress conditions.(4)The increase in loading rate and stress amplitude promotes the transformation of micropores and mesopores to macropores/microcracks.(5)Damage variables,definedin terms of cumulative dissipation energy,aligned closely with the fatigue damage model under multi-stage cyclic loading.Accelerated damage primarily occurred during the finalstages of fatigue loading,highlighting critical periods in the degradation of soaked sandstones.This study can offer guidance for designing operational parameters for energy storage geological bodies dominated by soaked sandstones.
基金supported by the Major Program of National Natural Science Foundation of China(Grant No.42090055)the National Key ScientificInstruments and Equipment Development Projects of China(Grant No.41827808)the National Nature Science Foundation of China(Grant No.42207216).
文摘Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the tensile stress in the area has exceeded the tensile strength of the soil,leading to local instability.To explore the impact of tensile failure behavior on the stability and failure modes of reservoir landslides,the Huangtupo Riverside Slump#1 is taken as a case study.By considering local tensile failure,potential tensile cracks are incorporated into the analysis via the limit equilibrium method and reliability theory.The reliability of landslides under different tensile failure scenarios is quantified.Strain-softening characteristics of the soil are combined to further analyze the failure transmission path of the landslide.Finally,these potential failure modes were validated through physical model tests.The results show that cracks developing at rear positions reduce the stability of the slope and increase the probability of instability.During the destruction process,retrogressive failures with multiple sliding surfaces are likely to occur.However,tensile failure at the forefront reduces the likelihood of an individual slide mass descending.Progressive failure results in both regular and skip transmission patterns.Additionally,cracks and water level changes can also lead to shifts in the positions of the most dangerous blocks.Therefore,in practical landslide analysis and prevention,it is necessary to consider local tensile damage and identify potential tensile crack locations in advance to optimize prevention measures and accurately evaluate landslide risk.
基金supported by National Natural Science Foundation of China(Grant No.52404074)the National Key Research and Development Program(Fund for Young Scientists)(Grant No.2021YFC2900400)Postdoctoral Science Foundation of China(Grant No.2024M761706).
文摘This study investigated the effects of periodic high-frequency stress disturbances on the creep behavior of sandstone and analyzed the microstructural changes using nuclear magnetic resonance(NMR)technology.High-frequency disturbance creep experiments were conducted on sandstone under different disturbance frequencies,disturbance cycles and loading stresses,and the following findings were obtained.Firstly,with the increase of loading stress and disturbance cycles,the total porosity increments,and damage value of sandstone increase,while the fractal dimension of sandstone pore structure presents the opposite trend.Secondly,during the disturbance creep process,the volumes of all three types of pores increase,but the proportion of micropores(T_(2)<10 ms)decreases,while the proportion of mesopores(10 ms<T_(2)<100 ms)and macropores(T_(2)>100 ms)increases.Thirdly,the fractal dimension difference has a good linear relationship with the damage,strain and porosity increment of sandstone during the disturbance creep process.Finally,the higher the disturbance frequency,the smaller the creep strain and creep strain rate during the steady-state creep stage.The study offers valuable theoretical insights for understanding rock creep behavior in complex stress environments.
基金Project supported by the Youth Program of the National Natural Science Foundation of China(Grant No.12405324)the CNNC Science Fund for Talented Young Scholars(Grant No.24940)the CNNC Basic Science Fund(Grant No.24851)。
文摘Molecular dynamics simulations were carried out to study the effect of chemical short-range order(CSRO)on the primary radiation damage in TiVTaNb high-entropy alloys(HEAs).We have performed displacement cascade simulations to explore the CSRO effect on the generation and evolution behaviors of irradiation defects.The results demonstrate that CSRO can suppress the formation of Frenkel pairs in TiVTaNb HEAs,with the suppression effect becoming more pronounced as the degree of CSRO increases.CSRO can change the types of interstitial defects generated during cascade collisions.Specifically,as the degree of CSRO increases,the proportion of Ti-related interstitials shows a marked enhancement,primarily evidenced by a significant rise in Ti–Ti dumbbells accompanied by a corresponding decrease in Ti–V dumbbells.CSRO exhibits negligible influence on defect clustering and the nucleation and evolution of dislocation loops.Regardless of CSRO conditions,TiVTaNb HEAs preserve exceptional radiation tolerance throughout the cascade damage process,suggesting that the intrinsic properties of this multi-principal element system dominate its radiation response.These findings provide fundamental insights into the CSRO effect on defect formation and evolution behaviors in HEAs,which may provide new design strategies for high-entropy alloys.
基金supported by the National Natural Science Foundation of China(Nos.52061005,52261025)the Science and Technology Programs of Guizhou Province,China(Nos.YQK[2023]009,CXTD[2023]009)the Technology Innovation Leading Program of Shaanxi Province,China(No.2024ZCYYDP92)。
文摘The interrupted fatigue test method was utilized to investigate the damage evolution mechanism of the notch high-cycle fatigue(NHCF)in Ti-55531 alloy with a multilevel lamellar microstructure.The results reveal that significant microvoids and microcracks predominantly initiate at α/β interfaces under various notch root radii(R).Notably,even under larger R(0.75 mm),mutual interactions of stacking faults(SFs)−deformation twins,twins−twins,and SFs−SFs are observed.Furthermore,with decreasing R(0.34 and 0.14 mm),the volume fraction of SFs escalates significantly and twins are almost absent.Moreover,activated prismatic slip system decreases with a decrease in Schmidt factor and with the further decrease in R.Finally,strain localization near α/β interfaces contributes to the initiation of fatigue microcracks.
