Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the...Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the sufficient content of Si is critical for achieving these favorable performances,while excessive Si addition will result in mechanical brittleness.Herein,both physical experiments and finite element(FE)simulations are employed to investigate the micro-mechanisms of Si alloying in tailoring the mechanical properties of Ti alloys.Four typical states of Si-containing Ti alloys(solid solution state,hypoeutectoid state,near-eutectoid state,hypereutectoid state)with varying Si content(0.3-1.2 wt.%)were fabricated via in-situ alloying spark plasma sintering.Experimental results indicate that in-situ alloying of 0.6 wt.%Si enhances the alloy’s strength and ductility simultaneously due to the formation of fine and uniformly dispersed Ti_(5)Si_(3)particles,while higher content of Si(0.9 and 1.2 wt.%)results in coarser primary Ti_(5)Si_(3)agglomerations,deteriorating the ductility.FE simulations support these findings,highlighting the finer and more uniformly distributed Ti_(5)Si_(3)particles contribute to less stress concentration and promote uniform deformation across the matrix,while agglomerated Ti_(5)Si_(3)particles result in increased local stress concentrations,leading to higher chances of particle fracture and reduced ductility.This study not only elucidates the micro-mechanisms of in-situ Si alloying for tailoring the mechanical properties of Ti alloys but also aids in optimizing the design of high-performance Si-containing Ti alloys.展开更多
Visible and infrared(RGB-IR)fusion object detection plays an important role in security,disaster relief,etc.In recent years,deep-learning-based RGB-IR fusion detection methods have been developing rapidly,but still st...Visible and infrared(RGB-IR)fusion object detection plays an important role in security,disaster relief,etc.In recent years,deep-learning-based RGB-IR fusion detection methods have been developing rapidly,but still struggle to deal with the complex and changing scenarios captured by drones,mainly due to two reasons:(A)RGB-IR fusion detectors are susceptible to inferior inputs that degrade performance and stability.(B)RGB-IR fusion detectors are susceptible to redundant features that reduce accuracy and efficiency.In this paper,an innovative RGB-IR fusion detection framework based on global-local feature optimization,named GLFDet,is proposed to improve the detection performance and efficiency of drone-captured objects.The key components of GLFDet include a Global Feature Optimization(GFO)module,a Local Feature Optimization(LFO)module and a Channel Separation Fusion(CSF)module.Specifically,GFO calculates the information content of the input image from the frequency domain and optimizes the features holistically.Then,LFO dynamically selects high-value features and filters out low-value features before fusion,which significantly improves the efficiency of fusion.Finally,CSF fuses the RGB and IR features across the corresponding channels,which avoids the rearrangement of the channel relationships and enhances the model stability.Extensive experimental results show that the proposed method achieves the best performance on three popular RGB-IR datasets Drone Vehicle,VEDAI,and LLVIP.In addition,GLFDet is more lightweight than other comparable models,making it more appealing to edge devices such as drones.The code is available at https://github.com/lao chen330/GLFDet.展开更多
This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response ...This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response thermocouples.The eccentricity ratio and clearanceheight are guaranteed by means of instantaneous trajectory and torsion monitoring of the rotator.The result shows that the maximum temperature rise takes place upstream of the minimum clear-ance height along circumferential direction.The distribution of temperature rise presents asymmet-ric curve along axial direction,and peak value occurs near the dimensionless axial position of-0.18.The effect of aerodynamic heating becomes notable as the rotational speed is larger than3×10^(4)r/min.The effect of end leakage and the viscous dissipation have great impact on temper-ature rise of MRSFALL.More specially,the peak value of temperature rise at dimensionless clear-ance height of 0.0080 is larger than the case at dimensionless clearance height of 0.0044.Furthermore,when the eccentricity ratio is too large,the viscous dissipation is induced,and theadditional temperature rise is achieved.The heat flux identification of shear flow has been realizedby Sequential Function Specification Method(SFSM)and its estimation of thermal load has been given.The heat flux induced by the aerodynamic heating in this study varies from 950 W/m^(2)to1330 W/m^(2).展开更多
Human object detection and recognition is essential for elderly monitoring and assisted living however,models relying solely on pose or scene context often struggle in cluttered or visually ambiguous settings.To addre...Human object detection and recognition is essential for elderly monitoring and assisted living however,models relying solely on pose or scene context often struggle in cluttered or visually ambiguous settings.To address this,we present SCENET-3D,a transformer-drivenmultimodal framework that unifies human-centric skeleton features with scene-object semantics for intelligent robotic vision through a three-stage pipeline.In the first stage,scene analysis,rich geometric and texture descriptors are extracted from RGB frames,including surface-normal histograms,angles between neighboring normals,Zernike moments,directional standard deviation,and Gabor-filter responses.In the second stage,scene-object analysis,non-human objects are segmented and represented using local feature descriptors and complementary surface-normal information.In the third stage,human-pose estimation,silhouettes are processed through an enhanced MoveNet to obtain 2D anatomical keypoints,which are fused with depth information and converted into RGB-based point clouds to construct pseudo-3D skeletons.Features from all three stages are fused and fed in a transformer encoder with multi-head attention to resolve visually similar activities.Experiments on UCLA(95.8%),ETRI-Activity3D(89.4%),andCAD-120(91.2%)demonstrate that combining pseudo-3D skeletonswith rich scene-object fusion significantly improves generalizable activity recognition,enabling safer elderly care,natural human–robot interaction,and robust context-aware robotic perception in real-world environments.展开更多
Recognising human-object interactions(HOI)is a challenging task for traditional machine learning models,including convolutional neural networks(CNNs).Existing models show limited transferability across complex dataset...Recognising human-object interactions(HOI)is a challenging task for traditional machine learning models,including convolutional neural networks(CNNs).Existing models show limited transferability across complex datasets such as D3D-HOI and SYSU 3D HOI.The conventional architecture of CNNs restricts their ability to handle HOI scenarios with high complexity.HOI recognition requires improved feature extraction methods to overcome the current limitations in accuracy and scalability.This work proposes a Novel quantum gate-enabled hybrid CNN(QEH-CNN)for effectiveHOI recognition.Themodel enhancesCNNperformance by integrating quantumcomputing components.The framework begins with bilateral image filtering,followed bymulti-object tracking(MOT)and Felzenszwalb superpixel segmentation.A watershed algorithm refines object boundaries by cleaning merged superpixels.Feature extraction combines a histogram of oriented gradients(HOG),Global Image Statistics for Texture(GIST)descriptors,and a novel 23-joint keypoint extractionmethod using relative joint angles and joint proximitymeasures.A fuzzy optimization process refines the extracted features before feeding them into the QEH-CNNmodel.The proposed model achieves 95.06%accuracy on the 3D-D3D-HOI dataset and 97.29%on the SYSU3DHOI dataset.Theintegration of quantum computing enhances feature optimization,leading to improved accuracy and overall model efficiency.展开更多
Deep learning has made significant progress in the field of oriented object detection for remote sensing images.However,existing methods still face challenges when dealing with difficult tasks such as multi-scale targ...Deep learning has made significant progress in the field of oriented object detection for remote sensing images.However,existing methods still face challenges when dealing with difficult tasks such as multi-scale targets,complex backgrounds,and small objects in remote sensing.Maintaining model lightweight to address resource constraints in remote sensing scenarios while improving task completion for remote sensing tasks remains a research hotspot.Therefore,we propose an enhanced multi-scale feature extraction lightweight network EM-YOLO based on the YOLOv8s architecture,specifically optimized for the characteristics of large target scale variations,diverse orientations,and numerous small objects in remote sensing images.Our innovations lie in two main aspects:First,a dynamic snake convolution(DSC)is introduced into the backbone network to enhance the model’s feature extraction capability for oriented targets.Second,an innovative focusing-diffusion module is designed in the feature fusion neck to effectively integrate multi-scale feature information.Finally,we introduce Layer-Adaptive Sparsity for magnitude-based Pruning(LASP)method to perform lightweight network pruning to better complete tasks in resource-constrained scenarios.Experimental results on the lightweight platform Orin demonstrate that the proposed method significantly outperforms the original YOLOv8s model in oriented remote sensing object detection tasks,and achieves comparable or superior performance to state-of-the-art methods on three authoritative remote sensing datasets(DOTA v1.0,DOTA v1.5,and HRSC2016).展开更多
The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditio...The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.展开更多
Small object detection has been a focus of attention since the emergence of deep learning-based object detection.Although classical object detection frameworks have made significant contributions to the development of...Small object detection has been a focus of attention since the emergence of deep learning-based object detection.Although classical object detection frameworks have made significant contributions to the development of object detection,there are still many issues to be resolved in detecting small objects due to the inherent complexity and diversity of real-world visual scenes.In particular,the YOLO(You Only Look Once)series of detection models,renowned for their real-time performance,have undergone numerous adaptations aimed at improving the detection of small targets.In this survey,we summarize the state-of-the-art YOLO-based small object detection methods.This review presents a systematic categorization of YOLO-based approaches for small-object detection,organized into four methodological avenues,namely attention-based feature enhancement,detection-head optimization,loss function,and multi-scale feature fusion strategies.We then examine the principal challenges addressed by each category.Finally,we analyze the performance of thesemethods on public benchmarks and,by comparing current approaches,identify limitations and outline directions for future research.展开更多
In recent years,with the rapid advancement of artificial intelligence,object detection algorithms have made significant strides in accuracy and computational efficiency.Notably,research and applications of Anchor-Free...In recent years,with the rapid advancement of artificial intelligence,object detection algorithms have made significant strides in accuracy and computational efficiency.Notably,research and applications of Anchor-Free models have opened new avenues for real-time target detection in optical remote sensing images(ORSIs).However,in the realmof adversarial attacks,developing adversarial techniques tailored to Anchor-Freemodels remains challenging.Adversarial examples generated based on Anchor-Based models often exhibit poor transferability to these new model architectures.Furthermore,the growing diversity of Anchor-Free models poses additional hurdles to achieving robust transferability of adversarial attacks.This study presents an improved cross-conv-block feature fusion You Only Look Once(YOLO)architecture,meticulously engineered to facilitate the extraction ofmore comprehensive semantic features during the backpropagation process.To address the asymmetry between densely distributed objects in ORSIs and the corresponding detector outputs,a novel dense bounding box attack strategy is proposed.This approach leverages dense target bounding boxes loss in the calculation of adversarial loss functions.Furthermore,by integrating translation-invariant(TI)and momentum-iteration(MI)adversarial methodologies,the proposed framework significantly improves the transferability of adversarial attacks.Experimental results demonstrate that our method achieves superior adversarial attack performance,with adversarial transferability rates(ATR)of 67.53%on the NWPU VHR-10 dataset and 90.71%on the HRSC2016 dataset.Compared to ensemble adversarial attack and cascaded adversarial attack approaches,our method generates adversarial examples in an average of 0.64 s,representing an approximately 14.5%improvement in efficiency under equivalent conditions.展开更多
In modern industrial production,foreign object detection in complex environments is crucial to ensure product quality and production safety.Detection systems based on deep-learning image processing algorithms often fa...In modern industrial production,foreign object detection in complex environments is crucial to ensure product quality and production safety.Detection systems based on deep-learning image processing algorithms often face challenges with handling high-resolution images and achieving accurate detection against complex backgrounds.To address these issues,this study employs the PatchCore unsupervised anomaly detection algorithm combined with data augmentation techniques to enhance the system’s generalization capability across varying lighting conditions,viewing angles,and object scales.The proposed method is evaluated in a complex industrial detection scenario involving the bogie of an electric multiple unit(EMU).A dataset consisting of complex backgrounds,diverse lighting conditions,and multiple viewing angles is constructed to validate the performance of the detection system in real industrial environments.Experimental results show that the proposed model achieves an average area under the receiver operating characteristic curve(AUROC)of 0.92 and an average F1 score of 0.85.Combined with data augmentation,the proposed model exhibits improvements in AUROC by 0.06 and F1 score by 0.03,demonstrating enhanced accuracy and robustness for foreign object detection in complex industrial settings.In addition,the effects of key factors on detection performance are systematically analyzed,providing practical guidance for parameter selection in real industrial applications.展开更多
Salient object detection(SOD)models struggle to simultaneously preserve global structure,maintain sharp object boundaries,and sustain computational efficiency in complex scenes.In this study,we propose SPSALNet,a task...Salient object detection(SOD)models struggle to simultaneously preserve global structure,maintain sharp object boundaries,and sustain computational efficiency in complex scenes.In this study,we propose SPSALNet,a task-driven two-stage(macro–micro)architecture that restructures the SOD process around superpixel representations.In the proposed approach,a“split-and-enhance”principle,introduced to our knowledge for the first time in the SOD literature,hierarchically classifies superpixels and then applies targeted refinement only to ambiguous or error-prone regions.At the macro stage,the image is partitioned into content-adaptive superpixel regions,and each superpixel is represented by a high-dimensional region-level feature vector.These representations define a regional decomposition problem in which superpixels are assigned to three classes:background,object interior,and transition regions.Superpixel tokens interact with a global feature vector from a deep network backbone through a cross-attention module and are projected into an enriched embedding space that jointly encodes local topology and global context.At the micro stage,the model employs a U-Net-based refinement process that allocates computational resources only to ambiguous transition regions.The image and distance–similarity maps derived from superpixels are processed through a dual-encoder pathway.Subsequently,channel-aware fusion blocks adaptively combine information from these two sources,producing sharper and more stable object boundaries.Experimental results show that SPSALNet achieves high accuracy with lower computational cost compared to recent competing methods.On the PASCAL-S and DUT-OMRON datasets,SPSALNet exhibits a clear performance advantage across all key metrics,and it ranks first on accuracy-oriented measures on HKU-IS.On the challenging DUT-OMRON benchmark,SPSALNet reaches a MAE of 0.034.Across all datasets,it preserves object boundaries and regional structure in a stable and competitive manner.展开更多
To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods ...With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods face numerous challenges in practical deployment,including scale variation handling,feature degradation,and complex backgrounds.To address these issues,we propose Edge-enhanced and Detail-Capturing You Only Look Once(EHDC-YOLO),a novel framework for object detection in Unmanned Aerial Vehicle(UAV)imagery.Based on the You Only Look Once version 11 nano(YOLOv11n)baseline,EHDC-YOLO systematically introduces several architectural enhancements:(1)a Multi-Scale Edge Enhancement(MSEE)module that leverages multi-scale pooling and edge information to enhance boundary feature extraction;(2)an Enhanced Feature Pyramid Network(EFPN)that integrates P2-level features with Cross Stage Partial(CSP)structures and OmniKernel convolutions for better fine-grained representation;and(3)Dynamic Head(DyHead)with multi-dimensional attention mechanisms for enhanced cross-scale modeling and perspective adaptability.Comprehensive experiments on the Vision meets Drones for Detection(VisDrone-DET)2019 dataset demonstrate that EHDC-YOLO achieves significant improvements,increasing mean Average Precision(mAP)@0.5 from 33.2%to 46.1%(an absolute improvement of 12.9 percentage points)and mAP@0.5:0.95 from 19.5%to 28.0%(an absolute improvement of 8.5 percentage points)compared with the YOLOv11n baseline,while maintaining a reasonable parameter count(2.81 M vs the baseline’s 2.58 M).Further ablation studies confirm the effectiveness of each proposed component,while visualization results highlight EHDC-YOLO’s superior performance in detecting objects and handling occlusions in complex drone scenarios.展开更多
Modern manufacturing processes have become more reliant on automation because of the accelerated transition from Industry 3.0 to Industry 4.0.Manual inspection of products on assembly lines remains inefficient,prone t...Modern manufacturing processes have become more reliant on automation because of the accelerated transition from Industry 3.0 to Industry 4.0.Manual inspection of products on assembly lines remains inefficient,prone to errors and lacks consistency,emphasizing the need for a reliable and automated inspection system.Leveraging both object detection and image segmentation approaches,this research proposes a vision-based solution for the detection of various kinds of tools in the toolkit using deep learning(DL)models.Two Intel RealSense D455f depth cameras were arranged in a top down configuration to capture both RGB and depth images of the toolkits.After applying multiple constraints and enhancing them through preprocessing and augmentation,a dataset consisting of 3300 annotated RGB-D photos was generated.Several DL models were selected through a comprehensive assessment of mean Average Precision(mAP),precision-recall equilibrium,inference latency(target≥30 FPS),and computational burden,resulting in a preference for YOLO and Region-based Convolutional Neural Networks(R-CNN)variants over ViT-based models due to the latter’s increased latency and resource requirements.YOLOV5,YOLOV8,YOLOV11,Faster R-CNN,and Mask R-CNN were trained on the annotated dataset and evaluated using key performance metrics(Recall,Accuracy,F1-score,and Precision).YOLOV11 demonstrated balanced excellence with 93.0%precision,89.9%recall,and a 90.6%F1-score in object detection,as well as 96.9%precision,95.3%recall,and a 96.5%F1-score in instance segmentation with an average inference time of 25 ms per frame(≈40 FPS),demonstrating real-time performance.Leveraging these results,a YOLOV11-based windows application was successfully deployed in a real-time assembly line environment,where it accurately processed live video streams to detect and segment tools within toolkits,demonstrating its practical effectiveness in industrial automation.The application is capable of precisely measuring socket dimensions by utilising edge detection techniques on YOLOv11 segmentation masks,in addition to detection and segmentation.This makes it possible to do specification-level quality control right on the assembly line,which improves the ability to examine things in real time.The implementation is a big step forward for intelligent manufacturing in the Industry 4.0 paradigm.It provides a scalable,efficient,and accurate way to do automated inspection and dimensional verification activities.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
A dry-gas seal system is a non-contact seal technology that is widely used in different industrial applications.Spiral-groove dry-gas seal utilizes fluid dynamic pressure effects to realize the seal and lubrication pr...A dry-gas seal system is a non-contact seal technology that is widely used in different industrial applications.Spiral-groove dry-gas seal utilizes fluid dynamic pressure effects to realize the seal and lubrication processes,while forming a high pressure gas film between two sealing faces due to the deceleration of the gas pumped in or out.There is little research into the effects and the influence on seal performance,if the grooves and the gas film are at the micro-scale.This paper investigates the micro-scale effects on spiral-groove dry-gas seal performance in a numerical solution of a corrected Reynolds equation.The Reynolds equation is discretized by means of the finite difference method with the second order scheme and solved by the successive-over-relaxation（SOR） iterative method.The Knudsen number of the flow in the sealing gas film is changed from 0.005 to 0.120 with a variation of film depth and sealing pressure.The numerical results show that the average pressure in the gas film and the sealed gas leakage increase due to micro-scale effects.The open force is enlarged,while the gas film stiffness is significantly decreased due to micro-scale effects.The friction torque and power consumption remain constant,even in low sealing pressure and spin speed conditions.In this paper,the seal performance at different rotor face spin speeds is also described.The proposed research clarifies the micro-scale effects in a spiral-groove dry-gas seal and their influence on seal performance,which is expected to be useful for the improvement of the design of dry-gas seal systems operating in the slip flow regime.展开更多
To understand the discharge characteristics under a gap of micrometers,the breakdown voltage and current–voltage curve are measured experimentally in a needle-to-plate electrode at a microscale gap of 3–50 μm in ai...To understand the discharge characteristics under a gap of micrometers,the breakdown voltage and current–voltage curve are measured experimentally in a needle-to-plate electrode at a microscale gap of 3–50 μm in air.The effect of the needle radius and the gas pressure on the discharge characteristics are tested.The results show that when the gap is larger than 10 μm,the relation between the breakdown voltage and the gap looks like the Paschen curve;while below 10 μm,the breakdown voltage is nearly constant in the range of the tested gap.However,at the same gap distance,the breakdown voltage is still affected by the pressure and shows a trend similar to Paschen＇s law.The current–voltage characteristic in all the gaps is similar and follows the trend of a typical Townsend-to-glow discharge.A simple model is used to explain the non-normality of breakdown in the micro-gaps.The Townsend mechanism is suggested to control the breakdown process in this configuration before the gap reduces much smaller in air.展开更多
Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant r...Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.展开更多
Micro-scale Al-Zn-Mg/Fe composite powders (MAF) with high reactivity and good storage properties were prepared by reducing iron onto the surface of Al-Zn-Mg alloy powders. Experimental results show that MAF as advance...Micro-scale Al-Zn-Mg/Fe composite powders (MAF) with high reactivity and good storage properties were prepared by reducing iron onto the surface of Al-Zn-Mg alloy powders. Experimental results show that MAF as advanced zero-valent iron are highly effective for degradation of chlorinated organic compounds. The efficiency of degradation for carbon tetrachloride and perchloroethylene is higher than 99% within a period of 2 h. The efficiency of degradation for trichloroethylene by MAF after storing for one month is equivalent to that by freshly prepared nano-size zero-valent iron particles.展开更多
Micro-scale functionally graded material(FGM)pipes conveying fluid have many significant applications in engineering fields.In this work,the thermoelastic vibration of FGM fluid-conveying tubes in elastic medium is st...Micro-scale functionally graded material(FGM)pipes conveying fluid have many significant applications in engineering fields.In this work,the thermoelastic vibration of FGM fluid-conveying tubes in elastic medium is studied.Based on modified couple stress theory and Hamilton’s principle,the governing equation and boundary conditions are obtained.The differential quadrature method(DQM)is applied to investigating the thermoelastic vibration of the FGM pipes.The effect of temperature variation,scale effect of the microtubule,micro-fluid effect,material properties,elastic coefficient of elastic medium and outer radius on thermoelastic vibration of the FGM pipes conveying fluid are studied.The results show that in the condition of considering the scale effect and micro-fluid of the microtubule,the critical dimensionless velocity of the system is higher than that of the system which calculated using classical macroscopic model.The results also show that the variations of temperature,material properties,elastic coefficient and outer radius have significant influences on the first-order dimensionless natural frequency.展开更多
基金supported by the Natural Science Foundation of Hunan Province(Grant No.2023JJ40353)the National Key Research and Development Program of China(No.2019YFE03120001).
文摘Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the sufficient content of Si is critical for achieving these favorable performances,while excessive Si addition will result in mechanical brittleness.Herein,both physical experiments and finite element(FE)simulations are employed to investigate the micro-mechanisms of Si alloying in tailoring the mechanical properties of Ti alloys.Four typical states of Si-containing Ti alloys(solid solution state,hypoeutectoid state,near-eutectoid state,hypereutectoid state)with varying Si content(0.3-1.2 wt.%)were fabricated via in-situ alloying spark plasma sintering.Experimental results indicate that in-situ alloying of 0.6 wt.%Si enhances the alloy’s strength and ductility simultaneously due to the formation of fine and uniformly dispersed Ti_(5)Si_(3)particles,while higher content of Si(0.9 and 1.2 wt.%)results in coarser primary Ti_(5)Si_(3)agglomerations,deteriorating the ductility.FE simulations support these findings,highlighting the finer and more uniformly distributed Ti_(5)Si_(3)particles contribute to less stress concentration and promote uniform deformation across the matrix,while agglomerated Ti_(5)Si_(3)particles result in increased local stress concentrations,leading to higher chances of particle fracture and reduced ductility.This study not only elucidates the micro-mechanisms of in-situ Si alloying for tailoring the mechanical properties of Ti alloys but also aids in optimizing the design of high-performance Si-containing Ti alloys.
基金supported by the National Natural Science Foundation of China(No.62276204)the Fundamental Research Funds for the Central Universities,China(No.YJSJ24011)+1 种基金the Natural Science Basic Research Program of Shaanxi,China(Nos.2022JM-340 and 2023-JC-QN-0710)the China Postdoctoral Science Foundation(Nos.2020T130494 and 2018M633470)。
文摘Visible and infrared(RGB-IR)fusion object detection plays an important role in security,disaster relief,etc.In recent years,deep-learning-based RGB-IR fusion detection methods have been developing rapidly,but still struggle to deal with the complex and changing scenarios captured by drones,mainly due to two reasons:(A)RGB-IR fusion detectors are susceptible to inferior inputs that degrade performance and stability.(B)RGB-IR fusion detectors are susceptible to redundant features that reduce accuracy and efficiency.In this paper,an innovative RGB-IR fusion detection framework based on global-local feature optimization,named GLFDet,is proposed to improve the detection performance and efficiency of drone-captured objects.The key components of GLFDet include a Global Feature Optimization(GFO)module,a Local Feature Optimization(LFO)module and a Channel Separation Fusion(CSF)module.Specifically,GFO calculates the information content of the input image from the frequency domain and optimizes the features holistically.Then,LFO dynamically selects high-value features and filters out low-value features before fusion,which significantly improves the efficiency of fusion.Finally,CSF fuses the RGB and IR features across the corresponding channels,which avoids the rearrangement of the channel relationships and enhances the model stability.Extensive experimental results show that the proposed method achieves the best performance on three popular RGB-IR datasets Drone Vehicle,VEDAI,and LLVIP.In addition,GLFDet is more lightweight than other comparable models,making it more appealing to edge devices such as drones.The code is available at https://github.com/lao chen330/GLFDet.
基金supports from the National Natural Science Foundation of China(No.52206091)the Aeronautical Science Foundation of China(No.201928052008)the Natural Science Foundation of Jiangsu Province,China(No.BK20210303)。
文摘This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response thermocouples.The eccentricity ratio and clearanceheight are guaranteed by means of instantaneous trajectory and torsion monitoring of the rotator.The result shows that the maximum temperature rise takes place upstream of the minimum clear-ance height along circumferential direction.The distribution of temperature rise presents asymmet-ric curve along axial direction,and peak value occurs near the dimensionless axial position of-0.18.The effect of aerodynamic heating becomes notable as the rotational speed is larger than3×10^(4)r/min.The effect of end leakage and the viscous dissipation have great impact on temper-ature rise of MRSFALL.More specially,the peak value of temperature rise at dimensionless clear-ance height of 0.0080 is larger than the case at dimensionless clearance height of 0.0044.Furthermore,when the eccentricity ratio is too large,the viscous dissipation is induced,and theadditional temperature rise is achieved.The heat flux identification of shear flow has been realizedby Sequential Function Specification Method(SFSM)and its estimation of thermal load has been given.The heat flux induced by the aerodynamic heating in this study varies from 950 W/m^(2)to1330 W/m^(2).
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R410),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Human object detection and recognition is essential for elderly monitoring and assisted living however,models relying solely on pose or scene context often struggle in cluttered or visually ambiguous settings.To address this,we present SCENET-3D,a transformer-drivenmultimodal framework that unifies human-centric skeleton features with scene-object semantics for intelligent robotic vision through a three-stage pipeline.In the first stage,scene analysis,rich geometric and texture descriptors are extracted from RGB frames,including surface-normal histograms,angles between neighboring normals,Zernike moments,directional standard deviation,and Gabor-filter responses.In the second stage,scene-object analysis,non-human objects are segmented and represented using local feature descriptors and complementary surface-normal information.In the third stage,human-pose estimation,silhouettes are processed through an enhanced MoveNet to obtain 2D anatomical keypoints,which are fused with depth information and converted into RGB-based point clouds to construct pseudo-3D skeletons.Features from all three stages are fused and fed in a transformer encoder with multi-head attention to resolve visually similar activities.Experiments on UCLA(95.8%),ETRI-Activity3D(89.4%),andCAD-120(91.2%)demonstrate that combining pseudo-3D skeletonswith rich scene-object fusion significantly improves generalizable activity recognition,enabling safer elderly care,natural human–robot interaction,and robust context-aware robotic perception in real-world environments.
基金supported and funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R410),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Recognising human-object interactions(HOI)is a challenging task for traditional machine learning models,including convolutional neural networks(CNNs).Existing models show limited transferability across complex datasets such as D3D-HOI and SYSU 3D HOI.The conventional architecture of CNNs restricts their ability to handle HOI scenarios with high complexity.HOI recognition requires improved feature extraction methods to overcome the current limitations in accuracy and scalability.This work proposes a Novel quantum gate-enabled hybrid CNN(QEH-CNN)for effectiveHOI recognition.Themodel enhancesCNNperformance by integrating quantumcomputing components.The framework begins with bilateral image filtering,followed bymulti-object tracking(MOT)and Felzenszwalb superpixel segmentation.A watershed algorithm refines object boundaries by cleaning merged superpixels.Feature extraction combines a histogram of oriented gradients(HOG),Global Image Statistics for Texture(GIST)descriptors,and a novel 23-joint keypoint extractionmethod using relative joint angles and joint proximitymeasures.A fuzzy optimization process refines the extracted features before feeding them into the QEH-CNNmodel.The proposed model achieves 95.06%accuracy on the 3D-D3D-HOI dataset and 97.29%on the SYSU3DHOI dataset.Theintegration of quantum computing enhances feature optimization,leading to improved accuracy and overall model efficiency.
基金funded by the Hainan Province Science and Technology Special Fund under Grant ZDYF2024GXJS292.
文摘Deep learning has made significant progress in the field of oriented object detection for remote sensing images.However,existing methods still face challenges when dealing with difficult tasks such as multi-scale targets,complex backgrounds,and small objects in remote sensing.Maintaining model lightweight to address resource constraints in remote sensing scenarios while improving task completion for remote sensing tasks remains a research hotspot.Therefore,we propose an enhanced multi-scale feature extraction lightweight network EM-YOLO based on the YOLOv8s architecture,specifically optimized for the characteristics of large target scale variations,diverse orientations,and numerous small objects in remote sensing images.Our innovations lie in two main aspects:First,a dynamic snake convolution(DSC)is introduced into the backbone network to enhance the model’s feature extraction capability for oriented targets.Second,an innovative focusing-diffusion module is designed in the feature fusion neck to effectively integrate multi-scale feature information.Finally,we introduce Layer-Adaptive Sparsity for magnitude-based Pruning(LASP)method to perform lightweight network pruning to better complete tasks in resource-constrained scenarios.Experimental results on the lightweight platform Orin demonstrate that the proposed method significantly outperforms the original YOLOv8s model in oriented remote sensing object detection tasks,and achieves comparable or superior performance to state-of-the-art methods on three authoritative remote sensing datasets(DOTA v1.0,DOTA v1.5,and HRSC2016).
基金funded by the National Natural Science Foundation of China under Grant No.62371187the Open Program of Hunan Intelligent Rehabilitation Robot and Auxiliary Equipment Engineering Technology Research Center under Grant No.2024JS101.
文摘The ubiquity of mobile devices has driven advancements in mobile object detection.However,challenges in multi-scale object detection in open,complex environments persist due to limited computational resources.Traditional approaches like network compression,quantization,and lightweight design often sacrifice accuracy or feature representation robustness.This article introduces the Fast Multi-scale Channel Shuffling Network(FMCSNet),a novel lightweight detection model optimized for mobile devices.FMCSNet integrates a fully convolutional Multilayer Perceptron(MLP)module,offering global perception without significantly increasing parameters,effectively bridging the gap between CNNs and Vision Transformers.FMCSNet achieves a delicate balance between computation and accuracy mainly by two key modules:the ShiftMLP module,including a shift operation and an MLP module,and a Partial group Convolutional(PGConv)module,reducing computation while enhancing information exchange between channels.With a computational complexity of 1.4G FLOPs and 1.3M parameters,FMCSNet outperforms CNN-based and DWConv-based ShuffleNetv2 by 1%and 4.5%mAP on the Pascal VOC 2007 dataset,respectively.Additionally,FMCSNet achieves a mAP of 30.0(0.5:0.95 IoU threshold)with only 2.5G FLOPs and 2.0M parameters.It achieves 32 FPS on low-performance i5-series CPUs,meeting real-time detection requirements.The versatility of the PGConv module’s adaptability across scenarios further highlights FMCSNet as a promising solution for real-time mobile object detection.
基金supported in part by the by Chongqing Research Program of Basic Research and Frontier Technology under Grant CSTB2025NSCQ-GPX1309.
文摘Small object detection has been a focus of attention since the emergence of deep learning-based object detection.Although classical object detection frameworks have made significant contributions to the development of object detection,there are still many issues to be resolved in detecting small objects due to the inherent complexity and diversity of real-world visual scenes.In particular,the YOLO(You Only Look Once)series of detection models,renowned for their real-time performance,have undergone numerous adaptations aimed at improving the detection of small targets.In this survey,we summarize the state-of-the-art YOLO-based small object detection methods.This review presents a systematic categorization of YOLO-based approaches for small-object detection,organized into four methodological avenues,namely attention-based feature enhancement,detection-head optimization,loss function,and multi-scale feature fusion strategies.We then examine the principal challenges addressed by each category.Finally,we analyze the performance of thesemethods on public benchmarks and,by comparing current approaches,identify limitations and outline directions for future research.
文摘In recent years,with the rapid advancement of artificial intelligence,object detection algorithms have made significant strides in accuracy and computational efficiency.Notably,research and applications of Anchor-Free models have opened new avenues for real-time target detection in optical remote sensing images(ORSIs).However,in the realmof adversarial attacks,developing adversarial techniques tailored to Anchor-Freemodels remains challenging.Adversarial examples generated based on Anchor-Based models often exhibit poor transferability to these new model architectures.Furthermore,the growing diversity of Anchor-Free models poses additional hurdles to achieving robust transferability of adversarial attacks.This study presents an improved cross-conv-block feature fusion You Only Look Once(YOLO)architecture,meticulously engineered to facilitate the extraction ofmore comprehensive semantic features during the backpropagation process.To address the asymmetry between densely distributed objects in ORSIs and the corresponding detector outputs,a novel dense bounding box attack strategy is proposed.This approach leverages dense target bounding boxes loss in the calculation of adversarial loss functions.Furthermore,by integrating translation-invariant(TI)and momentum-iteration(MI)adversarial methodologies,the proposed framework significantly improves the transferability of adversarial attacks.Experimental results demonstrate that our method achieves superior adversarial attack performance,with adversarial transferability rates(ATR)of 67.53%on the NWPU VHR-10 dataset and 90.71%on the HRSC2016 dataset.Compared to ensemble adversarial attack and cascaded adversarial attack approaches,our method generates adversarial examples in an average of 0.64 s,representing an approximately 14.5%improvement in efficiency under equivalent conditions.
文摘In modern industrial production,foreign object detection in complex environments is crucial to ensure product quality and production safety.Detection systems based on deep-learning image processing algorithms often face challenges with handling high-resolution images and achieving accurate detection against complex backgrounds.To address these issues,this study employs the PatchCore unsupervised anomaly detection algorithm combined with data augmentation techniques to enhance the system’s generalization capability across varying lighting conditions,viewing angles,and object scales.The proposed method is evaluated in a complex industrial detection scenario involving the bogie of an electric multiple unit(EMU).A dataset consisting of complex backgrounds,diverse lighting conditions,and multiple viewing angles is constructed to validate the performance of the detection system in real industrial environments.Experimental results show that the proposed model achieves an average area under the receiver operating characteristic curve(AUROC)of 0.92 and an average F1 score of 0.85.Combined with data augmentation,the proposed model exhibits improvements in AUROC by 0.06 and F1 score by 0.03,demonstrating enhanced accuracy and robustness for foreign object detection in complex industrial settings.In addition,the effects of key factors on detection performance are systematically analyzed,providing practical guidance for parameter selection in real industrial applications.
文摘Salient object detection(SOD)models struggle to simultaneously preserve global structure,maintain sharp object boundaries,and sustain computational efficiency in complex scenes.In this study,we propose SPSALNet,a task-driven two-stage(macro–micro)architecture that restructures the SOD process around superpixel representations.In the proposed approach,a“split-and-enhance”principle,introduced to our knowledge for the first time in the SOD literature,hierarchically classifies superpixels and then applies targeted refinement only to ambiguous or error-prone regions.At the macro stage,the image is partitioned into content-adaptive superpixel regions,and each superpixel is represented by a high-dimensional region-level feature vector.These representations define a regional decomposition problem in which superpixels are assigned to three classes:background,object interior,and transition regions.Superpixel tokens interact with a global feature vector from a deep network backbone through a cross-attention module and are projected into an enriched embedding space that jointly encodes local topology and global context.At the micro stage,the model employs a U-Net-based refinement process that allocates computational resources only to ambiguous transition regions.The image and distance–similarity maps derived from superpixels are processed through a dual-encoder pathway.Subsequently,channel-aware fusion blocks adaptively combine information from these two sources,producing sharper and more stable object boundaries.Experimental results show that SPSALNet achieves high accuracy with lower computational cost compared to recent competing methods.On the PASCAL-S and DUT-OMRON datasets,SPSALNet exhibits a clear performance advantage across all key metrics,and it ranks first on accuracy-oriented measures on HKU-IS.On the challenging DUT-OMRON benchmark,SPSALNet reaches a MAE of 0.034.Across all datasets,it preserves object boundaries and regional structure in a stable and competitive manner.
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
文摘With the rapid expansion of drone applications,accurate detection of objects in aerial imagery has become crucial for intelligent transportation,urban management,and emergency rescue missions.However,existing methods face numerous challenges in practical deployment,including scale variation handling,feature degradation,and complex backgrounds.To address these issues,we propose Edge-enhanced and Detail-Capturing You Only Look Once(EHDC-YOLO),a novel framework for object detection in Unmanned Aerial Vehicle(UAV)imagery.Based on the You Only Look Once version 11 nano(YOLOv11n)baseline,EHDC-YOLO systematically introduces several architectural enhancements:(1)a Multi-Scale Edge Enhancement(MSEE)module that leverages multi-scale pooling and edge information to enhance boundary feature extraction;(2)an Enhanced Feature Pyramid Network(EFPN)that integrates P2-level features with Cross Stage Partial(CSP)structures and OmniKernel convolutions for better fine-grained representation;and(3)Dynamic Head(DyHead)with multi-dimensional attention mechanisms for enhanced cross-scale modeling and perspective adaptability.Comprehensive experiments on the Vision meets Drones for Detection(VisDrone-DET)2019 dataset demonstrate that EHDC-YOLO achieves significant improvements,increasing mean Average Precision(mAP)@0.5 from 33.2%to 46.1%(an absolute improvement of 12.9 percentage points)and mAP@0.5:0.95 from 19.5%to 28.0%(an absolute improvement of 8.5 percentage points)compared with the YOLOv11n baseline,while maintaining a reasonable parameter count(2.81 M vs the baseline’s 2.58 M).Further ablation studies confirm the effectiveness of each proposed component,while visualization results highlight EHDC-YOLO’s superior performance in detecting objects and handling occlusions in complex drone scenarios.
文摘Modern manufacturing processes have become more reliant on automation because of the accelerated transition from Industry 3.0 to Industry 4.0.Manual inspection of products on assembly lines remains inefficient,prone to errors and lacks consistency,emphasizing the need for a reliable and automated inspection system.Leveraging both object detection and image segmentation approaches,this research proposes a vision-based solution for the detection of various kinds of tools in the toolkit using deep learning(DL)models.Two Intel RealSense D455f depth cameras were arranged in a top down configuration to capture both RGB and depth images of the toolkits.After applying multiple constraints and enhancing them through preprocessing and augmentation,a dataset consisting of 3300 annotated RGB-D photos was generated.Several DL models were selected through a comprehensive assessment of mean Average Precision(mAP),precision-recall equilibrium,inference latency(target≥30 FPS),and computational burden,resulting in a preference for YOLO and Region-based Convolutional Neural Networks(R-CNN)variants over ViT-based models due to the latter’s increased latency and resource requirements.YOLOV5,YOLOV8,YOLOV11,Faster R-CNN,and Mask R-CNN were trained on the annotated dataset and evaluated using key performance metrics(Recall,Accuracy,F1-score,and Precision).YOLOV11 demonstrated balanced excellence with 93.0%precision,89.9%recall,and a 90.6%F1-score in object detection,as well as 96.9%precision,95.3%recall,and a 96.5%F1-score in instance segmentation with an average inference time of 25 ms per frame(≈40 FPS),demonstrating real-time performance.Leveraging these results,a YOLOV11-based windows application was successfully deployed in a real-time assembly line environment,where it accurately processed live video streams to detect and segment tools within toolkits,demonstrating its practical effectiveness in industrial automation.The application is capable of precisely measuring socket dimensions by utilising edge detection techniques on YOLOv11 segmentation masks,in addition to detection and segmentation.This makes it possible to do specification-level quality control right on the assembly line,which improves the ability to examine things in real time.The implementation is a big step forward for intelligent manufacturing in the Industry 4.0 paradigm.It provides a scalable,efficient,and accurate way to do automated inspection and dimensional verification activities.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金supported by Scientific Research Foundation for Returned Scholars of Ministry of Education of China
文摘A dry-gas seal system is a non-contact seal technology that is widely used in different industrial applications.Spiral-groove dry-gas seal utilizes fluid dynamic pressure effects to realize the seal and lubrication processes,while forming a high pressure gas film between two sealing faces due to the deceleration of the gas pumped in or out.There is little research into the effects and the influence on seal performance,if the grooves and the gas film are at the micro-scale.This paper investigates the micro-scale effects on spiral-groove dry-gas seal performance in a numerical solution of a corrected Reynolds equation.The Reynolds equation is discretized by means of the finite difference method with the second order scheme and solved by the successive-over-relaxation（SOR） iterative method.The Knudsen number of the flow in the sealing gas film is changed from 0.005 to 0.120 with a variation of film depth and sealing pressure.The numerical results show that the average pressure in the gas film and the sealed gas leakage increase due to micro-scale effects.The open force is enlarged,while the gas film stiffness is significantly decreased due to micro-scale effects.The friction torque and power consumption remain constant,even in low sealing pressure and spin speed conditions.In this paper,the seal performance at different rotor face spin speeds is also described.The proposed research clarifies the micro-scale effects in a spiral-groove dry-gas seal and their influence on seal performance,which is expected to be useful for the improvement of the design of dry-gas seal systems operating in the slip flow regime.
基金supported by National Natural Science Foundation of China(11475019)the Electrostatic Research Foundation of Liu Shanghe Academicians and Experts Workstation,Beijing Orient Institute of Measurement and Test(BOIMTLSHJD20161002)
文摘To understand the discharge characteristics under a gap of micrometers,the breakdown voltage and current–voltage curve are measured experimentally in a needle-to-plate electrode at a microscale gap of 3–50 μm in air.The effect of the needle radius and the gas pressure on the discharge characteristics are tested.The results show that when the gap is larger than 10 μm,the relation between the breakdown voltage and the gap looks like the Paschen curve;while below 10 μm,the breakdown voltage is nearly constant in the range of the tested gap.However,at the same gap distance,the breakdown voltage is still affected by the pressure and shows a trend similar to Paschen＇s law.The current–voltage characteristic in all the gaps is similar and follows the trend of a typical Townsend-to-glow discharge.A simple model is used to explain the non-normality of breakdown in the micro-gaps.The Townsend mechanism is suggested to control the breakdown process in this configuration before the gap reduces much smaller in air.
文摘Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.
文摘Micro-scale Al-Zn-Mg/Fe composite powders (MAF) with high reactivity and good storage properties were prepared by reducing iron onto the surface of Al-Zn-Mg alloy powders. Experimental results show that MAF as advanced zero-valent iron are highly effective for degradation of chlorinated organic compounds. The efficiency of degradation for carbon tetrachloride and perchloroethylene is higher than 99% within a period of 2 h. The efficiency of degradation for trichloroethylene by MAF after storing for one month is equivalent to that by freshly prepared nano-size zero-valent iron particles.
文摘Micro-scale functionally graded material(FGM)pipes conveying fluid have many significant applications in engineering fields.In this work,the thermoelastic vibration of FGM fluid-conveying tubes in elastic medium is studied.Based on modified couple stress theory and Hamilton’s principle,the governing equation and boundary conditions are obtained.The differential quadrature method(DQM)is applied to investigating the thermoelastic vibration of the FGM pipes.The effect of temperature variation,scale effect of the microtubule,micro-fluid effect,material properties,elastic coefficient of elastic medium and outer radius on thermoelastic vibration of the FGM pipes conveying fluid are studied.The results show that in the condition of considering the scale effect and micro-fluid of the microtubule,the critical dimensionless velocity of the system is higher than that of the system which calculated using classical macroscopic model.The results also show that the variations of temperature,material properties,elastic coefficient and outer radius have significant influences on the first-order dimensionless natural frequency.
