This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response ...This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response thermocouples.The eccentricity ratio and clearanceheight are guaranteed by means of instantaneous trajectory and torsion monitoring of the rotator.The result shows that the maximum temperature rise takes place upstream of the minimum clear-ance height along circumferential direction.The distribution of temperature rise presents asymmet-ric curve along axial direction,and peak value occurs near the dimensionless axial position of-0.18.The effect of aerodynamic heating becomes notable as the rotational speed is larger than3×10^(4)r/min.The effect of end leakage and the viscous dissipation have great impact on temper-ature rise of MRSFALL.More specially,the peak value of temperature rise at dimensionless clear-ance height of 0.0080 is larger than the case at dimensionless clearance height of 0.0044.Furthermore,when the eccentricity ratio is too large,the viscous dissipation is induced,and theadditional temperature rise is achieved.The heat flux identification of shear flow has been realizedby Sequential Function Specification Method(SFSM)and its estimation of thermal load has been given.The heat flux induced by the aerodynamic heating in this study varies from 950 W/m^(2)to1330 W/m^(2).展开更多
Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant r...Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.展开更多
Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the...Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the sufficient content of Si is critical for achieving these favorable performances,while excessive Si addition will result in mechanical brittleness.Herein,both physical experiments and finite element(FE)simulations are employed to investigate the micro-mechanisms of Si alloying in tailoring the mechanical properties of Ti alloys.Four typical states of Si-containing Ti alloys(solid solution state,hypoeutectoid state,near-eutectoid state,hypereutectoid state)with varying Si content(0.3-1.2 wt.%)were fabricated via in-situ alloying spark plasma sintering.Experimental results indicate that in-situ alloying of 0.6 wt.%Si enhances the alloy’s strength and ductility simultaneously due to the formation of fine and uniformly dispersed Ti_(5)Si_(3)particles,while higher content of Si(0.9 and 1.2 wt.%)results in coarser primary Ti_(5)Si_(3)agglomerations,deteriorating the ductility.FE simulations support these findings,highlighting the finer and more uniformly distributed Ti_(5)Si_(3)particles contribute to less stress concentration and promote uniform deformation across the matrix,while agglomerated Ti_(5)Si_(3)particles result in increased local stress concentrations,leading to higher chances of particle fracture and reduced ductility.This study not only elucidates the micro-mechanisms of in-situ Si alloying for tailoring the mechanical properties of Ti alloys but also aids in optimizing the design of high-performance Si-containing Ti alloys.展开更多
The existing deep-sea sediment plume tests are mostly under small-scale static water and rarely under large-scale flowing water conditions.In this study,large-scale tank experiments of flowing water were designed and ...The existing deep-sea sediment plume tests are mostly under small-scale static water and rarely under large-scale flowing water conditions.In this study,large-scale tank experiments of flowing water were designed and conducted to investigate the morphological characteristics and concentration evolution of the sediment plumes under different discharge rates(Q)and initial sediment concentrations(c).Viscosity tests,resuspension tests and free settling tests of the sediment solution with different c values were performed to reveal the settling mechanism of the plume diffusion process.The results show that the plume diffusion morphology variation in flowing water has four stages and the plume concentration evolution has three stages.The larger the Q,the smaller the initial incidence angle at the discharge outlet,the larger the diffusion range,the poorer the stability and the more complicated the diffusion morphology.The larger the c,the larger the settling velocity,the faster the formation of high-concentration accumulation zone,the better the stability and the clearer the diffusion boundary.The research results could provide experimental data for assessing the impact of deep-sea mining on the ocean environment.展开更多
Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are...Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are conducted by using a visualized transparent single-fracture replica with plane roughness.Image processing and analysis are performed to investigate the thermo–hydro–mechanical coupling effect on the grouting diffusion under coal mine flowing water conditions.The results show that higher ambient temperature leads to shorter initial gel time of chemical grout and leads to a better relative sealing efficiency in the case of a lower flow rate.However,with a higher water flow rate,the relative sealing efficiency is gradually reduced under higher temperature conditions.The grouting pressure,the seepage pressure,and the temperature are measured.The results reveal that the seepage pressure shows a positive correlation with the grouting pressure,while the temperature change shows a negative correlation with the seepage pressure and the grouting pressure.The“equivalent grouting point offset”effect of grouting shows an eccentric elliptical diffusion with larger grouting distance and width under lower temperature conditions.展开更多
Under the micro-scale condition,feature size of the channel is one of the main factors influencing the fluid flow characteristics. In printing process,ink thickness in the extrusion zone formed by two ink rollers may ...Under the micro-scale condition,feature size of the channel is one of the main factors influencing the fluid flow characteristics. In printing process,ink thickness in the extrusion zone formed by two ink rollers may reach micron scale. Compared with macroscopic fluid,the velocity field and the pressure field of fluid may change when the feature size of fluid channel reaches micron scale. In order to control printing quality,it is necessary to research the influence of feature size on ink flow characteristics in micro scale. This paper analyzes it in theory,and then numerical simulation of an ink flow model with different feature sizes is carried out in no slip condition. The influence of the feature size on the ink flow characteristics and the wall shear force are obtained. Besides,the ink flow model with different feature sizes is simulated numerically in slip condition,and the influence of feature size on ink flow characteristics is obtained. Finally,by comparing and analyzing the above results,it can be concluded that both the ink velocity and pressure at the inlet of the extrusion zone are inversely proportional to the feature sizes whether in slip condition or not. And the ink velocity in slip condition is larger than that without slip,the pressure at the inlet of the extrusion zone is less than that in no slip condition. Within the micro-scale range,the ink velocity difference between the two conditions cannot be ignored. Therefore,it is necessary to consider slip when analyzing the influence of feature size of micro-scale channel on ink flow characteristics.展开更多
Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a fi...Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a finite difference method,with the air-water interface captured by a coupled level-set and volume-of-fluid method.Four cases are conducted to investigate the effects of Froude number on turbulent statistics,including the mean velocity,turbulence kinetic energy,and turbulence mass flux(TMF),which is an additional unclosed term in the Reynolds-averaged momentum equation.The TMF,especially its vertical component,shows a complex behaviour with respect to the Froude number.This property of the TMF imposes high demands on the robustness of the closure model of TMF.The present LES data is further used to examine a closure model of the TMF production term,which shows a high correlation with the data obtained from LES.展开更多
To investigate the slide film damping in the micro-scale shear-driven rarefied gas flows, an effective multi-relaxation-time lattice Boltzmann method(MRT-LBM) is proposed. Through the Knudsen boundary layer model, the...To investigate the slide film damping in the micro-scale shear-driven rarefied gas flows, an effective multi-relaxation-time lattice Boltzmann method(MRT-LBM) is proposed. Through the Knudsen boundary layer model, the effects of wall and rarefaction are considered in the correction of relaxation time. The results of gas velocity distributions are compared among the MRT, Monte Carlo model(DSMC) and high-order LBM, and the effects of the tangential momentum accommodation coefficient on the gas velocity distributions are also compared between the MRT and the high-order LBM. It is indicated that the amendatory MRT-LBM can unlock the dilemma of simulation of micro-scale non-equilibrium. Finally, the effects of the Knudsen number, the Stokes number, and the gap between the plates on the damping are researched. The results show that by decreasing the Knudsen number or increasing the Stokes number, the slide film damping increases in the transition regime;however, as the size of the gap increases, the slide film damping decreases substantially.展开更多
It is common for the rotating pin largely plunging into lower sheet to break up lap interface of Friction Stir Lap Welding(FSLW)joint,but the unavoidable up-bending morphology of hook outside Nugget Zone(NZ)largely re...It is common for the rotating pin largely plunging into lower sheet to break up lap interface of Friction Stir Lap Welding(FSLW)joint,but the unavoidable up-bending morphology of hook outside Nugget Zone(NZ)largely reduces the joint bearing ability.Based on the novel Opposite-directions Flowing FSLW(OF-FSLW)by the self-developed rotating tool with an Xshaped right-left thread pin,the 2024 aluminum alloys lap joint was successfully welded in this study.The migration law of lap interface during welding was investigated by the experimental and numerical methods,and then how the rotating pin and its rotating velocity affect the formation and strength of OF-FSLW joint was further analyzed.The results show that the Material Concentrated Zone(MCZ)which formed above the original lap interface made the hook bend downward,the NZ greatly enlarged and the beginning part of cold lap compressed and thickened,thereby heightening the joint bearing ability.For the OF-FSLW joint,its maximum tensile strength was403 MPa,and the corresponding joint efficiency of 90.8%was an incredible and superb value for the 2000 series heat-treatment strengthened aluminum alloys friction stir welded joint.The OF-FSLW technology by the rotating tool with an X-shaped right-left thread pin is proven to be a greatly effective approach for manufacturing the aluminum alloys lap joint with superb strength.展开更多
Particle-and droplet-laden flows are central to many problems in mechanics and transport.They occur in sedimentladen boundary layers,gas-solid and gas-liquid dispersions,and surface-water films driven by external forc...Particle-and droplet-laden flows are central to many problems in mechanics and transport.They occur in sedimentladen boundary layers,gas-solid and gas-liquid dispersions,and surface-water films driven by external forcing.They also underpin practical applications ranging from environmental transport to high-speed and aerothermal systems.Despite decades of progress,prediction remains difficult.The physics spans a wide range of scales and often couples turbulence,interphase momentum exchange,collisions,and interfacial transport.Reliable computation therefore requires both robust numerical methodology and careful physical interpretation.展开更多
Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechani...Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.展开更多
Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response ...Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response of an underwater manipulator subjected to pulsating flow,focusing on how different postures affect the behavior of the system.The effects of pulsating parameters and manipulator arrangement on the hydrodynamic coefficient,vibration response,motion trajectory,and vortex shedding behaviors were analyzed.Results indicated that the cross flow vibration displacement in pulsating flow increased by 32.14%compared to uniform flow,inducing a shift in the motion trajectory from a crescent shape to a sideward vase shape.In the absence of interference between the upper and lower arms,the lift coefficient of the manipulator substantially increased with rising pulsating frequency,reaching a maximum increment of 67.0%.This increase in the lift coefficient led to a 67.05%rise in the vibration frequency of the manipulator in the in-line direction.As the pulsating amplitude increased,the drag coefficient of the underwater manipulator rose by 36.79%,but the vibration frequency in the cross-flow direction decreased by 56.26%.Additionally,when the upper and lower arms remained in a state of mutual interference,the cross-flow vibration amplitudes of the upper and lower arms were approximately 1.84 and 4.82 times higher in a circular-elliptical arrangement compared to an elliptical-circular arrangement,respectively.Consequently,the flow field shifted from a P+S pattern to a disordered pattern,disrupting the regularity of the motion trajectory.展开更多
Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to ev...Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to evaluate debris flow susceptibility and associated hazards across Tajikistan.A dataset comprising 405 documented debris flow points and 14 influencing factors,encompassing geological,climatic-hydrological,and anthropogenic variables,was established.Three machine learning algorithms—Random Forest,Support Vector Machine(SVM),and Multi-layer Perceptron—were applied to generate susceptibility maps and delineate debris flow risk zones.The results indicate that the areas of higher and high susceptibility accounted for 20.43%and 4.41%of the national area,respectively,and were predominantly concentrated along the Zeravshan and Vakhsh river basins.Among the evaluated models,SVM model demonstrated the highest predictive performance.Beyond conventional topographic and environmental controls,drought conditions were identified as a critical factor influencing debris flow occurrence within the arid and semi-arid mountainous regions of Tajikistan.These findings provide a scientific basis for regional debris flow risk management and disaster mitigation planning,and offer practical guidance for selecting conditioning factors in machine-learning-based susceptibility assessments in other dry mountainous environments.展开更多
In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary c...In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.展开更多
Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate ...Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate this challenge,we present an enhanced semi-supervised learning approach based on the Mean Teacher framework,incorporating a novel feature loss module to maximize classification performance with limited labeled samples.The model studies show that the proposed model surpasses both the baseline Mean Teacher model and fully supervised method in accuracy.Specifically,for datasets with 20%,30%,and 40%label ratios,using a single training iteration,the model yields accuracies of 78.61%,82.21%,and 85.2%,respectively,while multiple-cycle training iterations achieves 82.09%,81.97%,and 81.59%,respectively.Furthermore,scenario-specific training schemes are introduced to support diverse deployment need.These findings highlight the potential of the proposed technique in minimizing labeling requirements and advancing intelligent blast furnace diagnostics.展开更多
On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property ...On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property losses.The event featured low-slope,large-scale,runout distance sliding and exhibited a clear cascading disaster chain.Its characteristics closely resemble the catastrophic mudflow at the nearby Lajia Ruins approximately 4,000 years ago.Using high-resolution oblique photogrammetry,cone penetration testing,surface wave analysis,and horizontal-to-vertical spectral ratio methods,this study examines the stratigraphy,groundwater conditions,and geomechanical properties of the affected zone.Results indicate that saturated loess overlying impermeable mudstone formed a high-moisture mass vulnerable to seismic disturbance.Seismic resonance triggered the liquefaction of weakly structured loess,which slide along the contact interface and evolved into a runout distance mudflow.Underground water and terrain modification created a composite weak zone of saturated loess and softened mudstone,which intensified the disaster chain-from earthquake to liquefaction,flow slide,and mudflow.This study contributes to the understanding of deep-seated liquefaction-flow slide disasters,thereby advancing more effective risk mitigation strategies in the Loess Plateau and comparable loess-covered seismic regions.展开更多
A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However...A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.展开更多
Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly b...Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.展开更多
基金supports from the National Natural Science Foundation of China(No.52206091)the Aeronautical Science Foundation of China(No.201928052008)the Natural Science Foundation of Jiangsu Province,China(No.BK20210303)。
文摘This study conducted the experimental investigation of aerodynamic heating of Micro-scale Rotational Shearing Flow with Axial Limited-Length(MRSFALL).The temperature riseof the stator is captured by the high response thermocouples.The eccentricity ratio and clearanceheight are guaranteed by means of instantaneous trajectory and torsion monitoring of the rotator.The result shows that the maximum temperature rise takes place upstream of the minimum clear-ance height along circumferential direction.The distribution of temperature rise presents asymmet-ric curve along axial direction,and peak value occurs near the dimensionless axial position of-0.18.The effect of aerodynamic heating becomes notable as the rotational speed is larger than3×10^(4)r/min.The effect of end leakage and the viscous dissipation have great impact on temper-ature rise of MRSFALL.More specially,the peak value of temperature rise at dimensionless clear-ance height of 0.0080 is larger than the case at dimensionless clearance height of 0.0044.Furthermore,when the eccentricity ratio is too large,the viscous dissipation is induced,and theadditional temperature rise is achieved.The heat flux identification of shear flow has been realizedby Sequential Function Specification Method(SFSM)and its estimation of thermal load has been given.The heat flux induced by the aerodynamic heating in this study varies from 950 W/m^(2)to1330 W/m^(2).
文摘Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.
基金supported by the Natural Science Foundation of Hunan Province(Grant No.2023JJ40353)the National Key Research and Development Program of China(No.2019YFE03120001).
文摘Titanium-silicon(Ti-Si)alloy system shows significant potential for aerospace and automotive applications due to its superior specific strength,creep resistance,and oxidation resistance.For Si-containing Ti alloys,the sufficient content of Si is critical for achieving these favorable performances,while excessive Si addition will result in mechanical brittleness.Herein,both physical experiments and finite element(FE)simulations are employed to investigate the micro-mechanisms of Si alloying in tailoring the mechanical properties of Ti alloys.Four typical states of Si-containing Ti alloys(solid solution state,hypoeutectoid state,near-eutectoid state,hypereutectoid state)with varying Si content(0.3-1.2 wt.%)were fabricated via in-situ alloying spark plasma sintering.Experimental results indicate that in-situ alloying of 0.6 wt.%Si enhances the alloy’s strength and ductility simultaneously due to the formation of fine and uniformly dispersed Ti_(5)Si_(3)particles,while higher content of Si(0.9 and 1.2 wt.%)results in coarser primary Ti_(5)Si_(3)agglomerations,deteriorating the ductility.FE simulations support these findings,highlighting the finer and more uniformly distributed Ti_(5)Si_(3)particles contribute to less stress concentration and promote uniform deformation across the matrix,while agglomerated Ti_(5)Si_(3)particles result in increased local stress concentrations,leading to higher chances of particle fracture and reduced ductility.This study not only elucidates the micro-mechanisms of in-situ Si alloying for tailoring the mechanical properties of Ti alloys but also aids in optimizing the design of high-performance Si-containing Ti alloys.
基金supported by the Major Project of Hunan Natural Science Foundation,China(No.2021JC0010)the National Natural Science Foundation of China(No.51274251)。
文摘The existing deep-sea sediment plume tests are mostly under small-scale static water and rarely under large-scale flowing water conditions.In this study,large-scale tank experiments of flowing water were designed and conducted to investigate the morphological characteristics and concentration evolution of the sediment plumes under different discharge rates(Q)and initial sediment concentrations(c).Viscosity tests,resuspension tests and free settling tests of the sediment solution with different c values were performed to reveal the settling mechanism of the plume diffusion process.The results show that the plume diffusion morphology variation in flowing water has four stages and the plume concentration evolution has three stages.The larger the Q,the smaller the initial incidence angle at the discharge outlet,the larger the diffusion range,the poorer the stability and the more complicated the diffusion morphology.The larger the c,the larger the settling velocity,the faster the formation of high-concentration accumulation zone,the better the stability and the clearer the diffusion boundary.The research results could provide experimental data for assessing the impact of deep-sea mining on the ocean environment.
基金National Natural Science Foundation of China,Grant/Award Number:41902292。
文摘Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are conducted by using a visualized transparent single-fracture replica with plane roughness.Image processing and analysis are performed to investigate the thermo–hydro–mechanical coupling effect on the grouting diffusion under coal mine flowing water conditions.The results show that higher ambient temperature leads to shorter initial gel time of chemical grout and leads to a better relative sealing efficiency in the case of a lower flow rate.However,with a higher water flow rate,the relative sealing efficiency is gradually reduced under higher temperature conditions.The grouting pressure,the seepage pressure,and the temperature are measured.The results reveal that the seepage pressure shows a positive correlation with the grouting pressure,while the temperature change shows a negative correlation with the seepage pressure and the grouting pressure.The“equivalent grouting point offset”effect of grouting shows an eccentric elliptical diffusion with larger grouting distance and width under lower temperature conditions.
基金Supported by the National Natural Science Foundation of China(No.51675010)the Science and Technology Plan Project of Beijing Education Commission(No.KM201710005015)
文摘Under the micro-scale condition,feature size of the channel is one of the main factors influencing the fluid flow characteristics. In printing process,ink thickness in the extrusion zone formed by two ink rollers may reach micron scale. Compared with macroscopic fluid,the velocity field and the pressure field of fluid may change when the feature size of fluid channel reaches micron scale. In order to control printing quality,it is necessary to research the influence of feature size on ink flow characteristics in micro scale. This paper analyzes it in theory,and then numerical simulation of an ink flow model with different feature sizes is carried out in no slip condition. The influence of the feature size on the ink flow characteristics and the wall shear force are obtained. Besides,the ink flow model with different feature sizes is simulated numerically in slip condition,and the influence of feature size on ink flow characteristics is obtained. Finally,by comparing and analyzing the above results,it can be concluded that both the ink velocity and pressure at the inlet of the extrusion zone are inversely proportional to the feature sizes whether in slip condition or not. And the ink velocity in slip condition is larger than that without slip,the pressure at the inlet of the extrusion zone is less than that in no slip condition. Within the micro-scale range,the ink velocity difference between the two conditions cannot be ignored. Therefore,it is necessary to consider slip when analyzing the influence of feature size of micro-scale channel on ink flow characteristics.
基金supported by the National Natural Science Foundation of China(NSFC)Basic Science Center Program for‘Multiscale Problems in Nonlinear Mechanics’(Grant No.11988102)NSFC project(Grant No.11972038)Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-087).
文摘Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a finite difference method,with the air-water interface captured by a coupled level-set and volume-of-fluid method.Four cases are conducted to investigate the effects of Froude number on turbulent statistics,including the mean velocity,turbulence kinetic energy,and turbulence mass flux(TMF),which is an additional unclosed term in the Reynolds-averaged momentum equation.The TMF,especially its vertical component,shows a complex behaviour with respect to the Froude number.This property of the TMF imposes high demands on the robustness of the closure model of TMF.The present LES data is further used to examine a closure model of the TMF production term,which shows a high correlation with the data obtained from LES.
基金The National Natural Science Foundation of China(No.51375091)
文摘To investigate the slide film damping in the micro-scale shear-driven rarefied gas flows, an effective multi-relaxation-time lattice Boltzmann method(MRT-LBM) is proposed. Through the Knudsen boundary layer model, the effects of wall and rarefaction are considered in the correction of relaxation time. The results of gas velocity distributions are compared among the MRT, Monte Carlo model(DSMC) and high-order LBM, and the effects of the tangential momentum accommodation coefficient on the gas velocity distributions are also compared between the MRT and the high-order LBM. It is indicated that the amendatory MRT-LBM can unlock the dilemma of simulation of micro-scale non-equilibrium. Finally, the effects of the Knudsen number, the Stokes number, and the gap between the plates on the damping are researched. The results show that by decreasing the Knudsen number or increasing the Stokes number, the slide film damping increases in the transition regime;however, as the size of the gap increases, the slide film damping decreases substantially.
基金supported by the National Natural Science Foundation of China(Nos.51874201 and 52074184)Natural Science Foundation project of Liaoning Province(2023-MS238)+1 种基金Liaoning Revitalization talents program(XLYC2203009)the Fundamental Research Funds for the Universities of Liaoning Province。
文摘It is common for the rotating pin largely plunging into lower sheet to break up lap interface of Friction Stir Lap Welding(FSLW)joint,but the unavoidable up-bending morphology of hook outside Nugget Zone(NZ)largely reduces the joint bearing ability.Based on the novel Opposite-directions Flowing FSLW(OF-FSLW)by the self-developed rotating tool with an Xshaped right-left thread pin,the 2024 aluminum alloys lap joint was successfully welded in this study.The migration law of lap interface during welding was investigated by the experimental and numerical methods,and then how the rotating pin and its rotating velocity affect the formation and strength of OF-FSLW joint was further analyzed.The results show that the Material Concentrated Zone(MCZ)which formed above the original lap interface made the hook bend downward,the NZ greatly enlarged and the beginning part of cold lap compressed and thickened,thereby heightening the joint bearing ability.For the OF-FSLW joint,its maximum tensile strength was403 MPa,and the corresponding joint efficiency of 90.8%was an incredible and superb value for the 2000 series heat-treatment strengthened aluminum alloys friction stir welded joint.The OF-FSLW technology by the rotating tool with an X-shaped right-left thread pin is proven to be a greatly effective approach for manufacturing the aluminum alloys lap joint with superb strength.
文摘Particle-and droplet-laden flows are central to many problems in mechanics and transport.They occur in sedimentladen boundary layers,gas-solid and gas-liquid dispersions,and surface-water films driven by external forcing.They also underpin practical applications ranging from environmental transport to high-speed and aerothermal systems.Despite decades of progress,prediction remains difficult.The physics spans a wide range of scales and often couples turbulence,interphase momentum exchange,collisions,and interfacial transport.Reliable computation therefore requires both robust numerical methodology and careful physical interpretation.
基金supported by the Qilu University of Technology(Shandong Academy of Sciences),the Basic Research Project of Science,Education and Industry Integration Pilot Project(No.2022PY047).
文摘Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.
基金Supported by the National Natural Science Foundation of China(No.51905211)A Project of the“20 Regulations for New Universities”Funding Program of Jinan(No.202228116).
文摘Vortex-induced vibration(VIV)of an underwater manipulator in pulsating flow presents a notable engineering problem in precise control due to the velocity variation in the flow.This study investigates the VIV response of an underwater manipulator subjected to pulsating flow,focusing on how different postures affect the behavior of the system.The effects of pulsating parameters and manipulator arrangement on the hydrodynamic coefficient,vibration response,motion trajectory,and vortex shedding behaviors were analyzed.Results indicated that the cross flow vibration displacement in pulsating flow increased by 32.14%compared to uniform flow,inducing a shift in the motion trajectory from a crescent shape to a sideward vase shape.In the absence of interference between the upper and lower arms,the lift coefficient of the manipulator substantially increased with rising pulsating frequency,reaching a maximum increment of 67.0%.This increase in the lift coefficient led to a 67.05%rise in the vibration frequency of the manipulator in the in-line direction.As the pulsating amplitude increased,the drag coefficient of the underwater manipulator rose by 36.79%,but the vibration frequency in the cross-flow direction decreased by 56.26%.Additionally,when the upper and lower arms remained in a state of mutual interference,the cross-flow vibration amplitudes of the upper and lower arms were approximately 1.84 and 4.82 times higher in a circular-elliptical arrangement compared to an elliptical-circular arrangement,respectively.Consequently,the flow field shifted from a P+S pattern to a disordered pattern,disrupting the regularity of the motion trajectory.
基金supported by the National Natural Science Foundation of China(42361144880)the Science and Technology Program of Xizang Autonomous Region,China(XZ202402ZD0001)the Qinghai Province Basic Research Program Project,China(2024-ZJ-904).
文摘Debris flow events are frequent in Tajikistan,yet comprehensive investigations at the regional scale are limited.This study integrates remote sensing,Geographic Information System,and machine learning techniques to evaluate debris flow susceptibility and associated hazards across Tajikistan.A dataset comprising 405 documented debris flow points and 14 influencing factors,encompassing geological,climatic-hydrological,and anthropogenic variables,was established.Three machine learning algorithms—Random Forest,Support Vector Machine(SVM),and Multi-layer Perceptron—were applied to generate susceptibility maps and delineate debris flow risk zones.The results indicate that the areas of higher and high susceptibility accounted for 20.43%and 4.41%of the national area,respectively,and were predominantly concentrated along the Zeravshan and Vakhsh river basins.Among the evaluated models,SVM model demonstrated the highest predictive performance.Beyond conventional topographic and environmental controls,drought conditions were identified as a critical factor influencing debris flow occurrence within the arid and semi-arid mountainous regions of Tajikistan.These findings provide a scientific basis for regional debris flow risk management and disaster mitigation planning,and offer practical guidance for selecting conditioning factors in machine-learning-based susceptibility assessments in other dry mountainous environments.
文摘In this paper,we study the asymptotic behavior of the micropolar fluid flow through a thin domain,assuming zero Dirichlet boundary condition on the top boundary,which is rapidly oscillating,and non-standard boundary conditions on the flat bottom.Assuming“Reynolds roughness regime”,in which the thickness of the domain is very small compared to the wavelength of the roughness(i.e.a very slight roughness),we rigorously derive a generalized Reynolds equation for pressure,clearly showing the roughness-induced effects.Moreover,we give expressions for the average velocity and microrotation.
基金financial support provided by the Natural Science Foundation of Hebei Province,China(No.E2024105036)the Tangshan Talent Funding Project,China(Nos.B202302007 and A2021110015)+1 种基金the National Natural Science Foundation of China(No.52264042)the Australian Research Council(No.IH230100010)。
文摘Automated classification of gas flow states in blast furnaces using top-camera imagery typically demands a large volume of labeled data,whose manual annotation is both labor-intensive and cost-prohibitive.To mitigate this challenge,we present an enhanced semi-supervised learning approach based on the Mean Teacher framework,incorporating a novel feature loss module to maximize classification performance with limited labeled samples.The model studies show that the proposed model surpasses both the baseline Mean Teacher model and fully supervised method in accuracy.Specifically,for datasets with 20%,30%,and 40%label ratios,using a single training iteration,the model yields accuracies of 78.61%,82.21%,and 85.2%,respectively,while multiple-cycle training iterations achieves 82.09%,81.97%,and 81.59%,respectively.Furthermore,scenario-specific training schemes are introduced to support diverse deployment need.These findings highlight the potential of the proposed technique in minimizing labeling requirements and advancing intelligent blast furnace diagnostics.
基金National Natural Science Foundation of China Grant Nos.52378543,52378544 and 52408525the Natural Science Foundation of Heilongjiang Grant No.LH2024E119。
文摘On December 18,2023,a magnitude 6.2 earthquake struck Jishishan County,Gansu Province,triggering a liquefaction-induced flow slide along the loess-mudstone contact zone and causing significant casualties and property losses.The event featured low-slope,large-scale,runout distance sliding and exhibited a clear cascading disaster chain.Its characteristics closely resemble the catastrophic mudflow at the nearby Lajia Ruins approximately 4,000 years ago.Using high-resolution oblique photogrammetry,cone penetration testing,surface wave analysis,and horizontal-to-vertical spectral ratio methods,this study examines the stratigraphy,groundwater conditions,and geomechanical properties of the affected zone.Results indicate that saturated loess overlying impermeable mudstone formed a high-moisture mass vulnerable to seismic disturbance.Seismic resonance triggered the liquefaction of weakly structured loess,which slide along the contact interface and evolved into a runout distance mudflow.Underground water and terrain modification created a composite weak zone of saturated loess and softened mudstone,which intensified the disaster chain-from earthquake to liquefaction,flow slide,and mudflow.This study contributes to the understanding of deep-seated liquefaction-flow slide disasters,thereby advancing more effective risk mitigation strategies in the Loess Plateau and comparable loess-covered seismic regions.
基金supported by the National Natural Science Foundation of China(42471336,52379021 and 42201278)the Hebei Province Backbone Talent Program,China(Returnee Platform for Overseas Study)(A20240028)+2 种基金the Hebei Province Statistical Science Research Project,China(2024HZ04)the Hebei Province Graduate Education and Teaching Reform Research Project,China(YJG2024046)the Innovation Ability Training Program for Postgraduate Students of Hebei Provincial Department of Education,China(CXZZSS2025048)。
文摘A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.
基金supported by the National Natural Science Foundation of China (Nos.22234005,22494632,22404081)the Natural Science Foundation of Jiangsu Province (Nos.BK20222015,BK20240534)。
文摘Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.
