Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.Ho...Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.展开更多
Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Nume...Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Numerical results show that factors of the local rough feature, the distributing structure and the intensity, etc. play an important role in the evolution of the large eddy structure in the boundary layer.展开更多
A new parameterization scheme of sea surface momentum roughness length for all wind regimes, including high winds, under tropical cyclone （TC） conditions is constructed based on measurements from Global Positioning ...A new parameterization scheme of sea surface momentum roughness length for all wind regimes, including high winds, under tropical cyclone （TC） conditions is constructed based on measurements from Global Positioning System （GPS） dropsonde. It reproduces the observed regime transition, namely, an increase of the drag coefficient with an increase in wind speed up to 40 m s-1 , followed by a decrease with a further increase in wind speed. The effect of this parameterization on the structure and intensity of TCs is evaluated using a newly developed numerical model, TCM4. The results show that the final intensity is increased by 10.5% （8.9%） in the maximum surface wind speed and by 8.1 hPa （5.9 hPa） in the minimum sea surface pressure drop with （without） dissipative heating. This intensity increase is found to be due mainly to the reduced frictional dissipation in the surface layer and little to do with either the surface enthalpy flux or latent heat release in the eyewall convection. The effect of the new parameterization on the storm structure is found to be insignificant and occurs only in the inner core region with the increase in tangential winds in the eyewall and the increase in temperature anomalies in the eye. This is because the difference in drag coefficient appears only in a small area under the eyewall. Implications of the results are briefly discussed.展开更多
Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and...Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.展开更多
The biological performance of Ti-6Al-4V implant is primarily determined by their surface properties.However,traditional surface modification methods,such as acid etching,hardly make improvement in their osseointegrati...The biological performance of Ti-6Al-4V implant is primarily determined by their surface properties.However,traditional surface modification methods,such as acid etching,hardly make improvement in their osseointegration ability and antibacterial capacity.In this study,we prepared a multi-scale composite structure coated with zinc oxide(ZnO)on Ti-6Al-4V implant by an innovative technology of two-step laser processing combined with solution-assistant.Compared with the acid etching method,the physicochemical properties of surface significantly improved.The in vitro results showed that the particular dimension of micro-nano structure and the multifaceted nature of ZnO synergistically affected MC3T3-E1 osteogenesis and bacterial activities:(1)The surface morphology showed a‘contact guidance'effect on cell arrangement,which was conducive to the adhesion of filopodia and cell spreading,and the osteogenesis level of MC3T3-E1 was enhanced due to the release of zinc ions(Zn^(2+));(2)the characterization of bacterial response revealed that periodic nanostructures and Zn^(2+)released could cause damage to the cell wall of E.coli and reduce the adhesion and aggregation of S.aureus.In conclusion,the modified surface showed a synergistic effect of physical topography and chemical composition,making this a promising method and providing new insight into bone defect repairment.展开更多
Solar interfacial evaporation has been considered as a promising method to alleviate fresh water re-sources shortage.The shortage of freshwater resources requires advanced materials that can accelerate the evaporation...Solar interfacial evaporation has been considered as a promising method to alleviate fresh water re-sources shortage.The shortage of freshwater resources requires advanced materials that can accelerate the evaporation of water by the sun.However,the simple structure of photothermal materials are vitally restricted by finite light absorption.Herein,this work presents a strategy for the synthesis of a spinel-type micro-nano hierarchical tower structure solar absorbent(Mn_(0.6)Ni_(1.4)Co_(2)O_(y))with the low forbidden band(=1.56 eV)and high absorption(97.88%).The products show great potential in solar-thermal energy conversion by creating a trapping effect.The prepared solar absorbent and epoxy resin are evenly mixed and then fully immersed in polyurethane(PU)sponge for water evaporation.The hydrophilic and porous Mn_(0.6)Ni_(1.4)Co_(2)O_(y)@PU sponge can quickly deliver water upwards,suppress the heat loss,and concentrate the absorbed heat on the evaporation of water.The products exhibited an excellent evaporation rate of 2.261 kg m^(-2) h^(-1) and an impressive evaporation efficiency of 156%under a single sun exposure.Besides,the samples also can maintain the stability and recycling performance for a long time.These findings show that Mn_(0.6)Ni_(1.4)Co_(2)O_(y) have great application prospects in the solar interfacial evaporation.展开更多
Single crystal silicon freestanding structures for tensile and fatigue testing were treated with KrF excimer laser to improve surface roughness and accordingly mechanical performance. Sample thickness was 5 μm. Local...Single crystal silicon freestanding structures for tensile and fatigue testing were treated with KrF excimer laser to improve surface roughness and accordingly mechanical performance. Sample thickness was 5 μm. Localized laser treatment was successful in eliminating the scallops developed during Bosch process and in reducing surface roughness. Harsh irradiation at laser energies up to 4 J/cm2 was only possible due to localized treatment without significant vibrations occurring on the freestanding samples that led to fracture in preliminary experiments at energies as low as 0.16 J/cm2. Finite element analysis was used to investigate the temperature distribution on the irradiated structures. Atomic force microscopy (AFM) and Raman spectroscopy were also used to assess surface roughness, crystallinity changes and surface stresses developing on surfaces subjected to perpendicular laser irradiation. At a high energy (3.2 J/cm2) the top surface showed a decrease of roughness compared to fabricated samples. Raman spectroscopy showed the dominance of crystalline silicon after laser irradiation. The effects of laser energy, number of展开更多
The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such t...The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such that they can provide the required surface free energy and simplify the interfacial structure.Herein,various Cu films with a highly controllable surface wettability and a wide range of contact angles ranging from 6°to 152°were fabricated,and the corresponding mechanism was discussed.A wide range of wettability was realized by controlling the surface structure of the Cu film.The nanogap structure of the vertical nanowire-array film led to a high surface free energy.Similarly,the oblique nanowirearray film increased the surface free energy;however,the surface free energy was dependent on the size of the nanowires rather than on the nanogaps owing to the crystallinity of the film.Additionally,cluster-nanowire-array films were designed to realize a wettability transition from hydrophilicity to hydrophobicity with a constant surface free energy.The Cu foam possessed a superhydrophilic surface owing to its high porosity,whereas the cluster-nanoparticle structure possessed a superhydrophobic surface.In addition,we noted that the structure-induced wettability played an important role in tuning the semiconductor and metal interfacial stress and simplifying the interfacial structure.Furthermore,the outstanding electrical conductivity of the Cu films indicates its promising potential as an electrode.The structure-induced wettability proposed in this study can be applied for a wide range of materials,particularly for films used for advanced applications.展开更多
The oxygen vacancies and micro-nano structure can optimize the electron/Li+migration kinetics in anode materials for lithium batteries(LIBs).Here,porous micro-nano structured VNb_(9)O_(25)composites with rich oxygen v...The oxygen vacancies and micro-nano structure can optimize the electron/Li+migration kinetics in anode materials for lithium batteries(LIBs).Here,porous micro-nano structured VNb_(9)O_(25)composites with rich oxygen vacancies were reasonably prepared via a facile solvothermal method combined with annealing treatment at 800℃for 30 h(VNb_(9)O_(25)-30 h).This micro-nano structure can enhance the contact of active material/electrolyte,and shorten the Li+diffusion distance.The introduction of oxygen vacancies can further boosts the intrinsic conductivity of VNb_(9)O_(25)-30 h for achieving excellent LIB performance.The as-prepared VNb_(9)O_(25)-30 h anode showed advanced rate capability with reversible capacity of 122.2 m A h g^(-1)at 4 A g^(-1),and delivered excellent capacity retention of~100%after 2000 cycles.Meanwhile,VNb_(9)O_(25)-30 h provides unexpected long-cycle life(i.e.,reversible capacity of 165.7 m A h g^(-1)at 1 A g^(-1)with a high capacity retention of 85.6%even after 8000 cycles).Additionally,coupled with the Li Fe PO4 cathode,the Li Fe PO4//VNb_(9)O_(25)-30 h full cell delivers superior LIB properties with high reversible capacities of 91.6 m A h g^(-1)at 5 C for 1000 cycles.Thus,such reasonable construction method can assist in other high-performance niobium-based oxides in LIBs.展开更多
Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl...Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl ammonium bromide （CTAB） is employed as a surfactant. After modifying the particles with heptadecafluorodecyltrimethoxy-silane （HTMS）, we find that the water contact angle （WCA） of the FeSe2 particles increases by 6.1~ and the water sliding angle （WSA） decreases by 2.5~ respectively, and the diffuse reflectivity decreases 29.4% compared with similar FeSe2 particles synthe- sized by the conventional method. The growth process of the particles is analyzed and a growth scenario is given. Upon altering the PH values of the water, we observe that the superhydrophobic property is maintained quite consistently across a wide PH range of 1-14. Moreover, the modified particles were also found to be superoleophobic. To the best of our knowledge, there is no systematic research on the wettability of FeSe2 particles, so our research provides a reference for other researchers.展开更多
The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons gr...The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons grating(Au substrate grating),and pure electric conductor(PEC)substrate with Au ribbons grating(Au ribbons grating).And the characteristics of the Smith-Purcell radiation in these structures were presented.Simulation results show that SPPs are excited on the bottom surface of Au substrate grating grooves and LSP is stimulated on the upper surface both of Au ribbons grating grooves and Au grating grooves.Owing to the irreconcilable contradiction between optimizing the grating diffraction radiation efficiency and optimizing the SPPs excitation efficiency in the Au substrate grating,only 40-times enhancement of the radiation intensity was obtained by excited SPPs.However,the LSP enhanced structure overcomes the above problem and gains much better radiation enhancement ability,with about 200-times enhancement obtained in the Au ribbons grating and more than 500-times enhancement obtained in the Au grating.The results presented here provide a way of developing miniature,integratable,tunable,high-power-density radiation sources from visible light to ultraviolet rays at room temperature.展开更多
Micro-nano structured Li Fe（1-x）MnxPO4/C（0≤x≤0.05）cathodes were prepared by spray drying,followed by calcination at 700°C.The spherical Li Fe（1-x）MnxPO4/C（0≤x≤0.05）particles with the size of 0.5 to5.0...Micro-nano structured Li Fe（1-x）MnxPO4/C（0≤x≤0.05）cathodes were prepared by spray drying,followed by calcination at 700°C.The spherical Li Fe（1-x）MnxPO4/C（0≤x≤0.05）particles with the size of 0.5 to5.0μm are composed of lots of nanoparticles of 20 to 30 nm,and have the well-developed interconnected pore structure.In contrast,when Mn doping content is 3 mol%（x=0.03）,the Li Fe（0.97）Mn（0.03）PO4/C demonstrates maximum specific surface area of 31.30 m^2/g,more uniform pore size and relatively better electrochemical performance.The initial discharge capacities are 161.59,157.04 and 153.13 m Ah/g at a discharge rate of 0.2,0.5 and 1 C,respectively.Meanwhile,the discharge capacity retentions are～100%after 120 cycles.The improved electrochemical performance should be attributed to higher specific surface,smaller polarization voltage,and a high Li~＋diffusion rate due to the micro-nano porous structure and lattice expansion produced by Mn doping.展开更多
The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy effi...The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy efficiency in long-distance road cargo transport.While many kinds of pantograph structures have been developed for the ERS,their corresponding pantograph-catenary dynamic characteristics under different road conditions have not been investigated.This work performs a numerical study on the dynamics of the pantograph-catenary interaction of an ERS considering different pantograph structures.First,a pantograph-catenary-truck-road model is proposed.The reduced catenary model and reduced-plate model transmission method are used to minimize model scale.Three different types of ERS pantograph structures are considered in the model.After validation,the pantograph-catenary dynamics under the influence of truck-road interactions with complex road roughness and different pantographs are studied and compared.The corresponding vibration transmission mechanism is further focused.The results show that the truck-road interaction has a significant effect on the pantograph-catenary interaction,but the pantograph with only one lower and upper armcan isolate the roll vibrationmotion transmission fromthe truck to the collector head,which has the best dynamic performance and is suggested for use in the ERS.展开更多
In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and ...In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and surface integrity must be considered simultaneously during the enhancement process.The current manufacturing process of hole burnishing has a relatively weak balance between the structure shape and surface integrity;therefore,it is necessary to analyze the mechanism and optimize the parameters to improve the strengthening effect of the holes.In this study,a two-dimensional longitudinal simplified model for the hole burnishing process was established,and the reasons for the surface roughness improvement of the hole wall and material accumulation on the upper surface were analyzed.Experiments were conducted to determine the influence of the burnishing parameters on the structure shape(material accumulation,shape contour,and roundness)and surface integrity(surface roughness,residual stress,and surface hardness),based on the opposite requirements of improving the structure shape and surface integrity for the burnishing depth(BD).The results showed that with an increase in the BD,the structure shape deteriorated,whereas the surface integrity improved.Fatigue behavior verification experiments were conducted,and parameter selection schemes for the collaborative improvement of the structure shape and surface integrity were discussed.For the holes of titanium alloy TB6(Ti-10V-2Fe-3Al),the fatigue life can be increased by 162%when the BD,spindle speed,and feed rate were 0.20 mm,200 r/min,and 0.2 mm/r,respectively.展开更多
In this paper, the differences of turbulent coherent structure beween the smooth and rough boundary lavers are analysed.Based on the discussing the transient properties from the smooth wall tothe rough wall,the physic...In this paper, the differences of turbulent coherent structure beween the smooth and rough boundary lavers are analysed.Based on the discussing the transient properties from the smooth wall tothe rough wall,the physicalmodel of coherent structure for the rough boundary layer are established.The width of slwly-moving turbulent spot and the bursting time are obtained,which are in agreement with experimental results.展开更多
One-dimensional semiconductor materials possess excellent photoelectric properties and potential for the construction of integrated nanodevices. Among them, Sn-doped CdS has different micro-nano structures, including ...One-dimensional semiconductor materials possess excellent photoelectric properties and potential for the construction of integrated nanodevices. Among them, Sn-doped CdS has different micro-nano structures, including nanoribbons,nanowires, comb-like structures, and superlattices, with rich optical microcavity modes, excellent optical properties, and a wide range of application fields. This article reviews the research progress of various micrometer structures of Sn-doped CdS, systematically elaborates the effects of different growth conditions on the preparation of Sn-doped CdS micro-nano structures, as well as the spectral characteristics of these structures and their potential applications in certain fields. With the continuous progress of nanotechnology, it is expected that Sn-doped CdS micro-nano structures will achieve more breakthroughs in the field of optoelectronics and form cross-integration with other fields, jointly promoting scientific, technological, and social development.展开更多
In granular computing granular structures represent knowledge on universe,in this paper several important granular structures are considered.In a general granular structure the notions of interior point, accumulation ...In granular computing granular structures represent knowledge on universe,in this paper several important granular structures are considered.In a general granular structure the notions of interior point, accumulation point and boundary point etc are proposed,by use of these notions and referring to topological method,the lower and upper approximations of a subset of universe are defined such that they are one kind of generalization of the existing approximations based on some special granular structure.Basic properties of new rough set approximations are investigated.Furthermore,granular structures on universe are characterized by the lower and upper approximation operators.展开更多
It is well agreed that geologic risk occurs during hydrocarbon exploration because diverse uncertainties accompany the entire hydrocarbon system parameters such as the source rock,reservoir rock,trap and seal rock.In ...It is well agreed that geologic risk occurs during hydrocarbon exploration because diverse uncertainties accompany the entire hydrocarbon system parameters such as the source rock,reservoir rock,trap and seal rock.In order to overcome such attributes with uncertainties,a number of soft computing methods are used.Information granules could be provided by the Rough Fuzzy Set Granulation(RFSG)with a thorough quality evaluation.This is capable of attribute reduction that has been claimed to be essential in investigating the hydrocarbon systems.This paper is an endeavor to recommend a Geospatial Information System(GIS)-based model with the aim of categorizing the hydrocarbon structures map consistent with the uncertainty range concepts of geologic risk in the rough fuzzy sets and granular computing.The model used the RFSG for the attribute reduction by a Decision Logic language(DLlanguage).The RFSG was employed in order to classify hydrocarbon structures according to geological risk and extract the fuzzy rules with a predefined range of uncertainty.In order to assess the precisions of the fuzzy decisions on the hydrocarbon structure classification,the fuzzy entropy and fuzzy cross-entropy are applied.The proposed RFSG model applied for 62 structures as the training data,average fuzzy entropy has been calculated as 0.85,whereas the average fuzzy cross-entropy has been calculated 0.18.As it can be discerned,just seven structures had cross-entropies greater than 0.1,while three structures were larger than 0.3.It is implied that the precision of the proposed model is about 89%.The results yielded two reductions for the condition attributes and 11 fuzzy rules being filtered by the granular computing values.展开更多
This paper takes micro-nano motors and metamaterials as examples to introduce the basic concept and development of functional micro nano structures, and analyzes the application potential of the micro-nano structure d...This paper takes micro-nano motors and metamaterials as examples to introduce the basic concept and development of functional micro nano structures, and analyzes the application potential of the micro-nano structure design and manufacturing technology in the petroleum industry. The functional micro-nano structure is the structure and device with special functions prepared to achieve a specific goal. New functional micro-nano structures are classified into mobile type(e.g. micro-nano motors) and fixed type(e.g. metamaterials), and 3 D printing technology is a developed method of manufacturing. Combining the demand for exploration and development in oil and gas fields and the research status of intelligent micro-nano structures, we believe that there are 3 potential application directions:(1) The intelligent micro-nano structures represented by metamaterials and smart coatings can be applied to the oil recovery engineering technology and equipment to improve the stability and reliability of petroleum equipment.(2) The smart micro-nano robots represented by micro-motors and smart microspheres can be applied to the development of new materials for enhanced oil recovery, effectively improving the development efficiency of heavy oil, shale oil and other resources.(3) The intelligent structure manufacturing technology represented by 3 D printing technology can be applied to the field of microfluidics in reservoir fluids to guide the selection of mine flooding agents and improve the efficiency of mining.展开更多
Researchers looking to improve the surface roughness of acrylonitrile butadiene styrene(ABS)parts fabricated by fused deposition modeling(FDM)have determined that acetone smoothing not only achieves improved surface r...Researchers looking to improve the surface roughness of acrylonitrile butadiene styrene(ABS)parts fabricated by fused deposition modeling(FDM)have determined that acetone smoothing not only achieves improved surface roughness but increases compressive strength as well.However,the sensitivity of ABS parts to acetone smoothing has not been explored.In this study we investigated FDM-fabricated ABS lattice structures of various cell sizes subjected to cold acetone vapor smoothing to determine the combined effect of cell size and acetone smoothing on the compressive properties of the lattice structures.The acetone-smoothed specimens performed better than the as-built specimens in both compression modulus and maximum load,and there was a decrease in those compressive properties with decreasing cell size.The difference between as-built and acetone-smoothed specimens was found to increase with decreasing cell size for the maximum load.展开更多
基金funded by the National Natural Science Foundation of China(Grant No.52276047)the Open Fund of NationalKey Laboratory of SpacecraftThermal Control(Grant No.NKLST-JJ-202401011)the Beijing Municipal Science&Technology Commission(Grant No.Z231100006123010).
文摘Flow boiling in open microchannels offers highly efficient heat transfer performance and has attracted increasing attention in the fields of heat transfer and thermalmanagement of electronic devices in recent years.However,the continuous rise in power density of electronic components imposesmore stringent requirements on the heat transfer capability of microchannel flow boiling.HFE-7100,a dielectric coolant with favorable thermophysical properties,has become a focal point of research for enhancing flow boiling performance in open microchannels.The flow boiling heat transfer performance ofHFE-7100 was investigated in this study by fabricating micro-nano composite structures on the bottom surface of open microchannels using laser ablation technology.Based on visualization results,a comparative analysis was conducted on the bubble dynamics and flow pattern characteristics of HFE-7100 flow boiling in micronano structured open microchannels(MNSOMC)and smooth-surface open microchannels(SSOMC),to elucidate the enhancement mechanism of micro-nano structures on flow boiling heat transfer in open microchannels.The results indicate that the surface structures and strong wettability of MNSOMC accelerated bubble nucleation and departure.Moreover,bubbles in the channel tended to coalesce along the flow direction,forming elongated slug bubbles with high aspect ratios,which enabled efficient thin film evaporation in conjunction with intense nucleate boiling,thereby significantly enhancing flow boiling heat transfer.Under the experimental conditions of this study,the maximum enhancements in the heat transfer coefficient(HTC)and critical heat flux(CHF)of HFE-7100 inMNSOMC were 33.4%and 133.1%,respectively,with the CHF reaching up to 1542.3 kW⋅m^(−2).Furthermore,due to the superior wettability and capillary wicking capability of the micro-nano composite structures,the significant enhancement in flow boiling heat transfer was achieved without incurring a noticeable pressure drop penalty.
基金the National Natural Science Foundation of China(10672052)the Natural Science Foundation of Jiangsu Province(BK2007178)~~
文摘Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Numerical results show that factors of the local rough feature, the distributing structure and the intensity, etc. play an important role in the evolution of the large eddy structure in the boundary layer.
基金support from the National Basic Research Program of China (973 Program) (No. 2009CB421500)the National Natural Science Foundation of China (GrantNos. 40875039 and 40730948)+3 种基金the Typhoon Research Foundation of Shanghai Typhoon Institute/China Mete-orological Administration (Grant Nos. 2006STB07 and2008ST11)support from the Knowledge Innovation Program of theChinese Academy of Sciences (IAP09318)support from the US Office of Naval Research (Grant No. N00014-021-0532)the National Science Foundation (Grant No. ATM-0427128)
文摘A new parameterization scheme of sea surface momentum roughness length for all wind regimes, including high winds, under tropical cyclone （TC） conditions is constructed based on measurements from Global Positioning System （GPS） dropsonde. It reproduces the observed regime transition, namely, an increase of the drag coefficient with an increase in wind speed up to 40 m s-1 , followed by a decrease with a further increase in wind speed. The effect of this parameterization on the structure and intensity of TCs is evaluated using a newly developed numerical model, TCM4. The results show that the final intensity is increased by 10.5% （8.9%） in the maximum surface wind speed and by 8.1 hPa （5.9 hPa） in the minimum sea surface pressure drop with （without） dissipative heating. This intensity increase is found to be due mainly to the reduced frictional dissipation in the surface layer and little to do with either the surface enthalpy flux or latent heat release in the eyewall convection. The effect of the new parameterization on the storm structure is found to be insignificant and occurs only in the inner core region with the increase in tangential winds in the eyewall and the increase in temperature anomalies in the eye. This is because the difference in drag coefficient appears only in a small area under the eyewall. Implications of the results are briefly discussed.
基金National Natural Science Foundation of China(32201491)Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-1101-02”.
文摘Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.
基金supported by the National Natural Science Foundation of China(51975336)Key Research and Development Program of Shandong Province(2020JMRH0202)+1 种基金the National Natural Science Foundation of China(52172282)China Postdoctoral Science Foundation(2021M690106)。
文摘The biological performance of Ti-6Al-4V implant is primarily determined by their surface properties.However,traditional surface modification methods,such as acid etching,hardly make improvement in their osseointegration ability and antibacterial capacity.In this study,we prepared a multi-scale composite structure coated with zinc oxide(ZnO)on Ti-6Al-4V implant by an innovative technology of two-step laser processing combined with solution-assistant.Compared with the acid etching method,the physicochemical properties of surface significantly improved.The in vitro results showed that the particular dimension of micro-nano structure and the multifaceted nature of ZnO synergistically affected MC3T3-E1 osteogenesis and bacterial activities:(1)The surface morphology showed a‘contact guidance'effect on cell arrangement,which was conducive to the adhesion of filopodia and cell spreading,and the osteogenesis level of MC3T3-E1 was enhanced due to the release of zinc ions(Zn^(2+));(2)the characterization of bacterial response revealed that periodic nanostructures and Zn^(2+)released could cause damage to the cell wall of E.coli and reduce the adhesion and aggregation of S.aureus.In conclusion,the modified surface showed a synergistic effect of physical topography and chemical composition,making this a promising method and providing new insight into bone defect repairment.
基金financially supported by the National Science Foundation of China(Nos.51971111 and52273247)the Innovation Project of Nanjing University of Aeronautics and Astronautics(No.xcxjh20210604).
文摘Solar interfacial evaporation has been considered as a promising method to alleviate fresh water re-sources shortage.The shortage of freshwater resources requires advanced materials that can accelerate the evaporation of water by the sun.However,the simple structure of photothermal materials are vitally restricted by finite light absorption.Herein,this work presents a strategy for the synthesis of a spinel-type micro-nano hierarchical tower structure solar absorbent(Mn_(0.6)Ni_(1.4)Co_(2)O_(y))with the low forbidden band(=1.56 eV)and high absorption(97.88%).The products show great potential in solar-thermal energy conversion by creating a trapping effect.The prepared solar absorbent and epoxy resin are evenly mixed and then fully immersed in polyurethane(PU)sponge for water evaporation.The hydrophilic and porous Mn_(0.6)Ni_(1.4)Co_(2)O_(y)@PU sponge can quickly deliver water upwards,suppress the heat loss,and concentrate the absorbed heat on the evaporation of water.The products exhibited an excellent evaporation rate of 2.261 kg m^(-2) h^(-1) and an impressive evaporation efficiency of 156%under a single sun exposure.Besides,the samples also can maintain the stability and recycling performance for a long time.These findings show that Mn_(0.6)Ni_(1.4)Co_(2)O_(y) have great application prospects in the solar interfacial evaporation.
文摘Single crystal silicon freestanding structures for tensile and fatigue testing were treated with KrF excimer laser to improve surface roughness and accordingly mechanical performance. Sample thickness was 5 μm. Localized laser treatment was successful in eliminating the scallops developed during Bosch process and in reducing surface roughness. Harsh irradiation at laser energies up to 4 J/cm2 was only possible due to localized treatment without significant vibrations occurring on the freestanding samples that led to fracture in preliminary experiments at energies as low as 0.16 J/cm2. Finite element analysis was used to investigate the temperature distribution on the irradiated structures. Atomic force microscopy (AFM) and Raman spectroscopy were also used to assess surface roughness, crystallinity changes and surface stresses developing on surfaces subjected to perpendicular laser irradiation. At a high energy (3.2 J/cm2) the top surface showed a decrease of roughness compared to fabricated samples. Raman spectroscopy showed the dominance of crystalline silicon after laser irradiation. The effects of laser energy, number of
基金financially supported by the National Natural Science Foundation of China(No.61704006)Beijing Nova Programme Interdisciplinary Cooperation Project(No.Z191100001119013)+2 种基金the Scientific Research Project of Beijing Educational Committee(No.KM202111232015)the Supplementary and Supportive Project for Teachers at Beijing Information Science and Technology University(2019-2021)(No.5029011103)the Key Research and Cultivation Project at Beijing Information Science and Technology University。
文摘The wettability of materials used in the production of devices employed in various technological domains have attracted significant attentions.Therefore,it is important to design the surfaces of these materials such that they can provide the required surface free energy and simplify the interfacial structure.Herein,various Cu films with a highly controllable surface wettability and a wide range of contact angles ranging from 6°to 152°were fabricated,and the corresponding mechanism was discussed.A wide range of wettability was realized by controlling the surface structure of the Cu film.The nanogap structure of the vertical nanowire-array film led to a high surface free energy.Similarly,the oblique nanowirearray film increased the surface free energy;however,the surface free energy was dependent on the size of the nanowires rather than on the nanogaps owing to the crystallinity of the film.Additionally,cluster-nanowire-array films were designed to realize a wettability transition from hydrophilicity to hydrophobicity with a constant surface free energy.The Cu foam possessed a superhydrophilic surface owing to its high porosity,whereas the cluster-nanoparticle structure possessed a superhydrophobic surface.In addition,we noted that the structure-induced wettability played an important role in tuning the semiconductor and metal interfacial stress and simplifying the interfacial structure.Furthermore,the outstanding electrical conductivity of the Cu films indicates its promising potential as an electrode.The structure-induced wettability proposed in this study can be applied for a wide range of materials,particularly for films used for advanced applications.
基金supported by a grant from Fujian Natural Science Foundation for Distinguished Young Scholars(Grant No.2020J06042)Natural Science Foundations of China(No.61574037)+1 种基金Natural Science Foundation of Fujian Province(Grant No.2020J01193)Cultivation plan of outstanding young scientific research talents of Fujian Education Department(Grant No.YDR01323)。
文摘The oxygen vacancies and micro-nano structure can optimize the electron/Li+migration kinetics in anode materials for lithium batteries(LIBs).Here,porous micro-nano structured VNb_(9)O_(25)composites with rich oxygen vacancies were reasonably prepared via a facile solvothermal method combined with annealing treatment at 800℃for 30 h(VNb_(9)O_(25)-30 h).This micro-nano structure can enhance the contact of active material/electrolyte,and shorten the Li+diffusion distance.The introduction of oxygen vacancies can further boosts the intrinsic conductivity of VNb_(9)O_(25)-30 h for achieving excellent LIB performance.The as-prepared VNb_(9)O_(25)-30 h anode showed advanced rate capability with reversible capacity of 122.2 m A h g^(-1)at 4 A g^(-1),and delivered excellent capacity retention of~100%after 2000 cycles.Meanwhile,VNb_(9)O_(25)-30 h provides unexpected long-cycle life(i.e.,reversible capacity of 165.7 m A h g^(-1)at 1 A g^(-1)with a high capacity retention of 85.6%even after 8000 cycles).Additionally,coupled with the Li Fe PO4 cathode,the Li Fe PO4//VNb_(9)O_(25)-30 h full cell delivers superior LIB properties with high reversible capacities of 91.6 m A h g^(-1)at 5 C for 1000 cycles.Thus,such reasonable construction method can assist in other high-performance niobium-based oxides in LIBs.
基金Project supported by the Natural Science Foundation of Anhui Province, China （Grant No, 12010202035） and the National Natural Science Foundation of China （Grant No. 51272246）.
文摘Wettability and the light-trapping effect of FeSe2 particles with a micro-nano hierarchical structure have been inves- tigated. Particles are synthesized by an improved solvothermal method, wherein hexadecyl trimetbyl ammonium bromide （CTAB） is employed as a surfactant. After modifying the particles with heptadecafluorodecyltrimethoxy-silane （HTMS）, we find that the water contact angle （WCA） of the FeSe2 particles increases by 6.1~ and the water sliding angle （WSA） decreases by 2.5~ respectively, and the diffuse reflectivity decreases 29.4% compared with similar FeSe2 particles synthe- sized by the conventional method. The growth process of the particles is analyzed and a growth scenario is given. Upon altering the PH values of the water, we observe that the superhydrophobic property is maintained quite consistently across a wide PH range of 1-14. Moreover, the modified particles were also found to be superoleophobic. To the best of our knowledge, there is no systematic research on the wettability of FeSe2 particles, so our research provides a reference for other researchers.
基金supported by the National Key Research and Development Program of China under Grants No.2017YFA0701000,No.2018YFF01013001,and No.2020YFA0714001the Natural Science Foundation of China under Grants No.61988102,No.61921002,and No.62071108。
文摘The simulation mechanism of surface plasmon polaritons(SPPs)and localized surface plasmon(LSP)in different structures was studied,including the Au reflection grating(Au grating),Au substrate with dielectric ribbons grating(Au substrate grating),and pure electric conductor(PEC)substrate with Au ribbons grating(Au ribbons grating).And the characteristics of the Smith-Purcell radiation in these structures were presented.Simulation results show that SPPs are excited on the bottom surface of Au substrate grating grooves and LSP is stimulated on the upper surface both of Au ribbons grating grooves and Au grating grooves.Owing to the irreconcilable contradiction between optimizing the grating diffraction radiation efficiency and optimizing the SPPs excitation efficiency in the Au substrate grating,only 40-times enhancement of the radiation intensity was obtained by excited SPPs.However,the LSP enhanced structure overcomes the above problem and gains much better radiation enhancement ability,with about 200-times enhancement obtained in the Au ribbons grating and more than 500-times enhancement obtained in the Au grating.The results presented here provide a way of developing miniature,integratable,tunable,high-power-density radiation sources from visible light to ultraviolet rays at room temperature.
基金financially supported by the Department of Education of Liaoning Province of China
文摘Micro-nano structured Li Fe（1-x）MnxPO4/C（0≤x≤0.05）cathodes were prepared by spray drying,followed by calcination at 700°C.The spherical Li Fe（1-x）MnxPO4/C（0≤x≤0.05）particles with the size of 0.5 to5.0μm are composed of lots of nanoparticles of 20 to 30 nm,and have the well-developed interconnected pore structure.In contrast,when Mn doping content is 3 mol%（x=0.03）,the Li Fe（0.97）Mn（0.03）PO4/C demonstrates maximum specific surface area of 31.30 m^2/g,more uniform pore size and relatively better electrochemical performance.The initial discharge capacities are 161.59,157.04 and 153.13 m Ah/g at a discharge rate of 0.2,0.5 and 1 C,respectively.Meanwhile,the discharge capacity retentions are～100%after 120 cycles.The improved electrochemical performance should be attributed to higher specific surface,smaller polarization voltage,and a high Li~＋diffusion rate due to the micro-nano porous structure and lattice expansion produced by Mn doping.
基金supported by the National Natural Science Foundation of China(grant number 12302048,received by author Yan Xu)Yunnan fundamental research projects(grant No.202501AT070321,received by author Yan Xu).
文摘The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy efficiency in long-distance road cargo transport.While many kinds of pantograph structures have been developed for the ERS,their corresponding pantograph-catenary dynamic characteristics under different road conditions have not been investigated.This work performs a numerical study on the dynamics of the pantograph-catenary interaction of an ERS considering different pantograph structures.First,a pantograph-catenary-truck-road model is proposed.The reduced catenary model and reduced-plate model transmission method are used to minimize model scale.Three different types of ERS pantograph structures are considered in the model.After validation,the pantograph-catenary dynamics under the influence of truck-road interactions with complex road roughness and different pantographs are studied and compared.The corresponding vibration transmission mechanism is further focused.The results show that the truck-road interaction has a significant effect on the pantograph-catenary interaction,but the pantograph with only one lower and upper armcan isolate the roll vibrationmotion transmission fromthe truck to the collector head,which has the best dynamic performance and is suggested for use in the ERS.
文摘In the aerospace field,hole burnishing enhancement plays an essential role in improving the service performance of load-bearing holes.To satisfy the assembly accuracy and strength requirements,the structure shape and surface integrity must be considered simultaneously during the enhancement process.The current manufacturing process of hole burnishing has a relatively weak balance between the structure shape and surface integrity;therefore,it is necessary to analyze the mechanism and optimize the parameters to improve the strengthening effect of the holes.In this study,a two-dimensional longitudinal simplified model for the hole burnishing process was established,and the reasons for the surface roughness improvement of the hole wall and material accumulation on the upper surface were analyzed.Experiments were conducted to determine the influence of the burnishing parameters on the structure shape(material accumulation,shape contour,and roundness)and surface integrity(surface roughness,residual stress,and surface hardness),based on the opposite requirements of improving the structure shape and surface integrity for the burnishing depth(BD).The results showed that with an increase in the BD,the structure shape deteriorated,whereas the surface integrity improved.Fatigue behavior verification experiments were conducted,and parameter selection schemes for the collaborative improvement of the structure shape and surface integrity were discussed.For the holes of titanium alloy TB6(Ti-10V-2Fe-3Al),the fatigue life can be increased by 162%when the BD,spindle speed,and feed rate were 0.20 mm,200 r/min,and 0.2 mm/r,respectively.
文摘In this paper, the differences of turbulent coherent structure beween the smooth and rough boundary lavers are analysed.Based on the discussing the transient properties from the smooth wall tothe rough wall,the physicalmodel of coherent structure for the rough boundary layer are established.The width of slwly-moving turbulent spot and the bursting time are obtained,which are in agreement with experimental results.
基金supported by National Natural Science Foundation of China (52275551)Shanxi Scholarship Council of China (2021-117)。
文摘One-dimensional semiconductor materials possess excellent photoelectric properties and potential for the construction of integrated nanodevices. Among them, Sn-doped CdS has different micro-nano structures, including nanoribbons,nanowires, comb-like structures, and superlattices, with rich optical microcavity modes, excellent optical properties, and a wide range of application fields. This article reviews the research progress of various micrometer structures of Sn-doped CdS, systematically elaborates the effects of different growth conditions on the preparation of Sn-doped CdS micro-nano structures, as well as the spectral characteristics of these structures and their potential applications in certain fields. With the continuous progress of nanotechnology, it is expected that Sn-doped CdS micro-nano structures will achieve more breakthroughs in the field of optoelectronics and form cross-integration with other fields, jointly promoting scientific, technological, and social development.
基金supported by grants from the National Natural Science Foundation of China(Nos.11071284 and 61075120)the Natural Science Foundation of Zhejiang Province in China(No.Y107262).
文摘In granular computing granular structures represent knowledge on universe,in this paper several important granular structures are considered.In a general granular structure the notions of interior point, accumulation point and boundary point etc are proposed,by use of these notions and referring to topological method,the lower and upper approximations of a subset of universe are defined such that they are one kind of generalization of the existing approximations based on some special granular structure.Basic properties of new rough set approximations are investigated.Furthermore,granular structures on universe are characterized by the lower and upper approximation operators.
文摘It is well agreed that geologic risk occurs during hydrocarbon exploration because diverse uncertainties accompany the entire hydrocarbon system parameters such as the source rock,reservoir rock,trap and seal rock.In order to overcome such attributes with uncertainties,a number of soft computing methods are used.Information granules could be provided by the Rough Fuzzy Set Granulation(RFSG)with a thorough quality evaluation.This is capable of attribute reduction that has been claimed to be essential in investigating the hydrocarbon systems.This paper is an endeavor to recommend a Geospatial Information System(GIS)-based model with the aim of categorizing the hydrocarbon structures map consistent with the uncertainty range concepts of geologic risk in the rough fuzzy sets and granular computing.The model used the RFSG for the attribute reduction by a Decision Logic language(DLlanguage).The RFSG was employed in order to classify hydrocarbon structures according to geological risk and extract the fuzzy rules with a predefined range of uncertainty.In order to assess the precisions of the fuzzy decisions on the hydrocarbon structure classification,the fuzzy entropy and fuzzy cross-entropy are applied.The proposed RFSG model applied for 62 structures as the training data,average fuzzy entropy has been calculated as 0.85,whereas the average fuzzy cross-entropy has been calculated 0.18.As it can be discerned,just seven structures had cross-entropies greater than 0.1,while three structures were larger than 0.3.It is implied that the precision of the proposed model is about 89%.The results yielded two reductions for the condition attributes and 11 fuzzy rules being filtered by the granular computing values.
基金Supported by the National Natural Science Foundation of China(41602159)
文摘This paper takes micro-nano motors and metamaterials as examples to introduce the basic concept and development of functional micro nano structures, and analyzes the application potential of the micro-nano structure design and manufacturing technology in the petroleum industry. The functional micro-nano structure is the structure and device with special functions prepared to achieve a specific goal. New functional micro-nano structures are classified into mobile type(e.g. micro-nano motors) and fixed type(e.g. metamaterials), and 3 D printing technology is a developed method of manufacturing. Combining the demand for exploration and development in oil and gas fields and the research status of intelligent micro-nano structures, we believe that there are 3 potential application directions:(1) The intelligent micro-nano structures represented by metamaterials and smart coatings can be applied to the oil recovery engineering technology and equipment to improve the stability and reliability of petroleum equipment.(2) The smart micro-nano robots represented by micro-motors and smart microspheres can be applied to the development of new materials for enhanced oil recovery, effectively improving the development efficiency of heavy oil, shale oil and other resources.(3) The intelligent structure manufacturing technology represented by 3 D printing technology can be applied to the field of microfluidics in reservoir fluids to guide the selection of mine flooding agents and improve the efficiency of mining.
文摘Researchers looking to improve the surface roughness of acrylonitrile butadiene styrene(ABS)parts fabricated by fused deposition modeling(FDM)have determined that acetone smoothing not only achieves improved surface roughness but increases compressive strength as well.However,the sensitivity of ABS parts to acetone smoothing has not been explored.In this study we investigated FDM-fabricated ABS lattice structures of various cell sizes subjected to cold acetone vapor smoothing to determine the combined effect of cell size and acetone smoothing on the compressive properties of the lattice structures.The acetone-smoothed specimens performed better than the as-built specimens in both compression modulus and maximum load,and there was a decrease in those compressive properties with decreasing cell size.The difference between as-built and acetone-smoothed specimens was found to increase with decreasing cell size for the maximum load.
