A micro-layer model is proposed to account for the lubrication effect of liquid layer near collisions of immersed particles at moderate particle Reynolds number.This new model is to allow determination of the pressure...A micro-layer model is proposed to account for the lubrication effect of liquid layer near collisions of immersed particles at moderate particle Reynolds number.This new model is to allow determination of the pressure profile within the micro-layer including the fluid inertia and viscosity.Then a correction based on the micro-layer model is applied to unsteady 3-D direct simulation of a particle approaching another one.The simulation is based on a modified immersed boundary method with direct force scheme.The quantitative agreement between numerical and experimental results validates the model presented in the study.The simulation results show that the fluid is squeezed prior to contact.When a particle approaches a flat wall or another particle,the lubrication force,obtained by integrating the pressure profile over the particle surface,is increased and prevents the particle from approaching.The model predicts that the velocity of approaching particle starts to decrease when separation distance of particles is less than 0.1dp,where dp is the particle diameter.展开更多
This paper briefly introduces the characteristics of electron beam physical vapor depo-sition (EBPVD) technique and the whole process of preparing micro--layer compositelaminate. And several major influencing factors ...This paper briefly introduces the characteristics of electron beam physical vapor depo-sition (EBPVD) technique and the whole process of preparing micro--layer compositelaminate. And several major influencing factors are presented and discussed. It wasfound that residual gas pressure should be low enough to guarantee the unobstructedtransporfation of vapor steam and electron beam; the evaporation method and evapo-ration speed are up to the different vapor pressure deficit of compositions of raw mate-rials; and the substrate temperature could have great influence on the microstructureof the micro--layer laminates.展开更多
Model evaluation using benchmark datasets is an important method to measure the capability of large language models(LLMs)in specific domains,and it is mainly used to assess the knowledge and reasoning abilities of LLM...Model evaluation using benchmark datasets is an important method to measure the capability of large language models(LLMs)in specific domains,and it is mainly used to assess the knowledge and reasoning abilities of LLMs.Therefore,in order to better assess the capability of LLMs in the agricultural domain,Agri-Eval was proposed as a benchmark for assessing the knowledge and reasoning ability of LLMs in agriculture.The assessment dataset used in Agri-Eval covered seven major disciplines in the agricultural domain:crop science,horticulture,plant protection,animal husbandry,forest science,aquaculture science,and grass science,and contained a total of 2283 questions.Among domestic general-purpose LLMs,DeepSeek R1 performed best with an accuracy rate of 75.49%.In the realm of international general-purpose LLMs,Gemini 2.0 pro exp 0205 standed out as the top performer,achieving an accuracy rate of 74.28%.As an LLMs in agriculture vertical,Shennong V2.0 outperformed all the LLMs in China,and the answer accuracy rate of agricultural knowledge exceeded that of all the existing general-purpose LLMs.The launch of Agri-Eval helped the LLM developers to comprehensively evaluate the model's capability in the field of agriculture through a variety of tasks and tests to promote the development of the LLMs in the field of agriculture.展开更多
In this paper,we establish and study a single-species logistic model with impulsive age-selective harvesting.First,we prove the ultimate boundedness of the solutions of the system.Then,we obtain conditions for the asy...In this paper,we establish and study a single-species logistic model with impulsive age-selective harvesting.First,we prove the ultimate boundedness of the solutions of the system.Then,we obtain conditions for the asymptotic stability of the trivial solution and the positive periodic solution.Finally,numerical simulations are presented to validate our results.Our results show that age-selective harvesting is more conducive to sustainable population survival than non-age-selective harvesting.展开更多
In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and cha...In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.展开更多
Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is empl...Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is employed to simulate the ballistic impact of 7.62 mm armor-piercing projectiles on Aluminum AA5083-H116 and Steel Secure 500 armors,focusing on the evaluation of material deformation and penetration resistance at varying impact points.While the D-shaped armor plate is penetrated by the armor-piercing projectiles,the combination of the perforated D-shaped and base armor plates successfully halts penetration.A numerical model based on the finite element method is developed using software such as SolidWorks and ANSYS to analyze the interaction between radiator armor and bullet.The perforated design of radiator armor is to maintain airflow for radiator function,with hole sizes smaller than the bullet core diameter to protect radiator assemblies.Predictions are made regarding the brittle fracture resulting from the projectile core′s bending due to asymmetric impact,and the resulting fragments failed to penetrate the perforated base armor plate.Craters are formed on the surface of the perforated D-shaped armor plate due to the impact of projectile fragments.The numerical model accurately predicts hole growth and projectile penetration upon impact with the armor,demonstrating effective protection of the radiator assemblies by the radiator armor.展开更多
The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-bas...The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-based observations remain insufficient to clearly reflect the characteristics of the region’s lithospheric magnetism.In this study,we evaluate the lithospheric magnetism of the Tibetan Plateau by using a 3D surface spline model based on observations from>200 newly constructed repeat stations(portable stations)to determine the spatial distribution of plateau geomagnetism,as well as its correlation with the tectonic features of the region.We analyze the relationships between M≥5 earthquakes and lithospheric magnetic field variations on the Tibetan Plateau and identify regions susceptible to strong earthquakes.We compare the geomagnetic results with those from an enhanced magnetic model(EMM2015)developed by the NGDC and provide insights into improving lithospheric magnetic field calculations in the Tibetan Plateau region.Further research reveals that these magnetic anomalies exhibit distinct differences from the magnetic-seismic correlation mechanisms observed in other tectonic settings;here,they are governed primarily by the combined effects of compressional magnetism,thermal magnetism,and deep thermal stress.This study provides new evidence of geomagnetic anomalies on the Tibetan Plateau,interprets them physically,and demonstrates their potential for identifying seismic hazard zones on the Plateau.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(...Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(2025)].In relation to seasonal forecasting and climate projection in the East Asian summer monsoon season,proper simulation of the seasonal migration of rain bands by models is a challenging and limiting factor[section 7.1 in Wang et al.(2025)].展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
A hybrid model combining Fully Non-Linear Potential Flow Theory(FNPT)based on the Finite Element Method(FEM)and the Unified Navier-Stokes equation,using the 3D Improved Meshless Local Petrov Galerkin method with Ranki...A hybrid model combining Fully Non-Linear Potential Flow Theory(FNPT)based on the Finite Element Method(FEM)and the Unified Navier-Stokes equation,using the 3D Improved Meshless Local Petrov Galerkin method with Rankine Source(IMLPG_R),is developed to study wave interactions with a porous layer.In previous studies,the above formulations are applied to wave interaction with fixed cylindrical structures.The present study extends this framework by integrating a unified governing equation within the hybrid modeling approach to capture the dynamics of wave interaction with porous media.The porous layers are employed to replicate the wave-dissipating behavior of the structure.A weak coupling strategy is implemented within a designated buffer zone,wherein field variables from the 2D Fully Nonlinear Potential Theory(FNPT)simulations are transferred to the 3D Improved Moving Least Squares-based Petrov-Galerkin(IMLPG_R)model at each time step.This domain decomposition significantly reduces computational cost compared to a full 3D simulation by partitioning the domain into two subregions:the FNPT domain representing the far-field without structures,and the IMLPG_R domain encompassing the porous region.The Unified Navier-Stokes formulation is extended by incorporating additional drag forces governed by Darcy’s law to model the resistance introduced by the porous medium.A stationary background node framework is utilized for interpolation by fluid particles at each time step to accommodate the porous representation.To enhance numerical stability and accuracy,particularly in the presence of sloping boundaries,the Particle Shifting Technique(PST)is integrated into the IMLPG_R model.This implementation involves a modified version of the PST algorithm,where key parameters such as the weight function,velocity ratio,and radius of influence are optimized for IMLPG_R.This is the first time the application of 3D IMLPG_R for porous structure has been reported.Further,the model is subsequently validated against experimental data.展开更多
To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the stre...To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the strength and elastic modulus of mortar and concrete prepared with mechanism aggregates of the corresponding lithology,and the stress-strain curves of concrete were investigated.In this paper,a coarse aggregate and mortar matrix bonding assumption is proposed,and a prediction model for the elastic modulus of mortar is established by considering the lithology of the mechanism sand and the slurry components.An equivalent coarse aggregate elastic modulus model was established by considering factors such as coarse aggregate particle size,volume fraction,and mortar thickness between coarse aggregates.Based on the elastic modulus of the equivalent coarse aggregate and the remaining mortar,a prediction model for the elastic modulus of the two and three components of concrete in series and then in parallel was established,and the predicted values differed from the measured values within 10%.It is proposed that the coarse aggregate elastic modulus in highstrength concrete is the most critical factor affecting the elastic modulus of concrete,and as the coarse aggregate elastic modulus increases by 27.7%,the concrete elastic modulus increases by 19.5%.展开更多
Scalable simulation leveraging real-world data plays an essential role in advancing autonomous driving,owing to its efficiency and applicability in both training and evaluating algorithms.Consequently,there has been i...Scalable simulation leveraging real-world data plays an essential role in advancing autonomous driving,owing to its efficiency and applicability in both training and evaluating algorithms.Consequently,there has been increasing attention on generating highly realistic and consistent driving videos,particularly those involving viewpoint changes guided by the control commands or trajectories of ego vehicles.However,current reconstruction approaches,such as Neural Radiance Fields and 3D Gaussian Splatting,frequently suffer from limited generalization and depend on substantial input data.Meanwhile,2D generative models,though capable of producing unknown scenes,still have room for improvement in terms of coherence and visual realism.To overcome these challenges,we introduce GenScene,a world model that synthesizes front-view driving videos conditioned on trajectories.A new temporal module is presented to improve video consistency by extracting the global context of each frame,calculating relationships of frames using these global representations,and fusing frame contexts accordingly.Moreover,we propose an innovative attention mechanism that computes relations of pixels within each frame and pixels in the corresponding window range of the initial frame.Extensive experiments show that our approach surpasses various state-of-the-art models in driving video generation,and the introduced modules contribute significantly to model performance.This work establishes a new paradigm for goal-oriented video synthesis in autonomous driving,which facilitates on-demand simulation to expedite algorithm development.展开更多
Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching t...Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching the construction of an emergency care system based on the concept of“linkage”,delving into its theoretical foundations,exploring innovative construction models,and analyzing practical cases.The study indicates that an emergency care system under the“linkage”concept can effectively integrate resources and enhance efficiency,providing new insights for improving the construction of the emergency care system.It aims to promote the development of the emergency care system towards a more scientific,efficient,and collaborative direction.展开更多
Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evo...Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.展开更多
Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying ...Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying issues with services,products,or customer experience,resulting in considerable income loss.Prediction of customer churn is a crucial task aimed at retaining customers and maintaining revenue growth.Traditional machine learning(ML)models often struggle to capture complex temporal dependencies in client behavior data.To address this,an optimized deep learning(DL)approach using a Regularized Bidirectional Long Short-Term Memory(RBiLSTM)model is proposed to mitigate overfitting and improve generalization error.The model integrates dropout,L2-regularization,and early stopping to enhance predictive accuracy while preventing over-reliance on specific patterns.Moreover,this study investigates the effect of optimization techniques on boosting the training efficiency of the developed model.Experimental results on a recent public customer churn dataset demonstrate that the trained model outperforms the traditional ML models and some other DL models,such as Long Short-Term Memory(LSTM)and Deep Neural Network(DNN),in churn prediction performance and stability.The proposed approach achieves 96.1%accuracy,compared with LSTM and DNN,which attain 94.5%and 94.1%accuracy,respectively.These results confirm that the proposed approach can be used as a valuable tool for businesses to identify at-risk consumers proactively and implement targeted retention strategies.展开更多
This study demonstrates a novel integration of large language models,machine learning,and multicriteria decision-making to investigate self-moderation in small online communities,a topic under-explored compared to use...This study demonstrates a novel integration of large language models,machine learning,and multicriteria decision-making to investigate self-moderation in small online communities,a topic under-explored compared to user behavior and platform-driven moderation on social media.The proposed methodological framework(1)utilizes large language models for social media post analysis and categorization,(2)employs k-means clustering for content characterization,and(3)incorporates the TODIM(Tomada de Decisão Interativa Multicritério)method to determine moderation strategies based on expert judgments.In general,the fully integrated framework leverages the strengths of these intelligent systems in a more systematic evaluation of large-scale decision problems.When applied in social media moderation,this approach promotes nuanced and context-sensitive self-moderation by taking into account factors such as cultural background and geographic location.The application of this framework is demonstrated within Facebook groups.Eight distinct content clusters encompassing safety,harassment,diversity,and misinformation are identified.Analysis revealed a preference for content removal across all clusters,suggesting a cautious approach towards potentially harmful content.However,the framework also highlights the use of other moderation actions,like account suspension,depending on the content category.These findings contribute to the growing body of research on self-moderation and offer valuable insights for creating safer and more inclusive online spaces within smaller communities.展开更多
In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocal...In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocally diffusive species and degenerately diffusive species.We prove that the traveling wavefronts are exponentially stable,when the initial perturbation around the traveling waves decays exponentially as x→-∞,but in other locations,the initial data can be arbitrarily large.The adopted methods are the weighted energy with the comparison principle and squeezing technique.展开更多
Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and ...Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.展开更多
Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleedi...Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleeding(UGIB).Methods:A prospective cohort study was conducted,and 126 middle-aged and elderly patients with UGIB admitted from August 2024 to August 2025 were selected as the study subjects.The patients were divided into the intervention group(63 cases)and the control group(63 cases)based on whether they received nursing intervention based on frailty prediction models.The control group received routine care,while the intervention group,on the basis of routine care,used the FRAIL scale combined with laboratory indicators(albumin,hemoglobin,etc.)to establish a predictive model to evaluate patients within 24 hours of admission,and implemented multi-dimensional targeted nursing intervention for pre-frailty or frailty patients screened out.The incidence of frailty,rebleeding rate,average length of stay,hospitalization cost,and nursing satisfaction during hospitalization were compared between the two groups.Results:The incidence of frailty during hospitalization in the intervention group was 11.1%(7 cases/63 cases),significantly lower than 31.7%(20 cases/63 cases)in the control group,and the difference was statistically significant(p<0.05).The rebleeding rate of 4.8%vs 12.7%,the average length of stay of(7.2±1.5)days vs(9.1±2.2)days,and the average hospitalization cost of(23,000±6,000)yuan vs(28,000±7,000)yuan in the intervention group were all lower than those in the control group(all p<0.05).The nursing satisfaction score of the intervention group(93.5±4.2)points was higher than that of the control group(86.3±5.8)points(p<0.05).Conclusion:The frailty prediction model applied to the peri-hospitalization care of middle-aged and elderly patients with UGIB can effectively identify frailty risk.Through early targeted intervention,the incidence of frailty and rebleeding rate can be reduced,the length of hospital stay can be shortened,medical expenses can be reduced,and nursing satisfaction can be improved,which has clinical promotion value.展开更多
文摘A micro-layer model is proposed to account for the lubrication effect of liquid layer near collisions of immersed particles at moderate particle Reynolds number.This new model is to allow determination of the pressure profile within the micro-layer including the fluid inertia and viscosity.Then a correction based on the micro-layer model is applied to unsteady 3-D direct simulation of a particle approaching another one.The simulation is based on a modified immersed boundary method with direct force scheme.The quantitative agreement between numerical and experimental results validates the model presented in the study.The simulation results show that the fluid is squeezed prior to contact.When a particle approaches a flat wall or another particle,the lubrication force,obtained by integrating the pressure profile over the particle surface,is increased and prevents the particle from approaching.The model predicts that the velocity of approaching particle starts to decrease when separation distance of particles is less than 0.1dp,where dp is the particle diameter.
基金This work was supported by the Natural Science Foundation of Heilongjiang Province(No.E01-07)Postdoctoral Science Foundation of China(No.LB0047).
文摘This paper briefly introduces the characteristics of electron beam physical vapor depo-sition (EBPVD) technique and the whole process of preparing micro--layer compositelaminate. And several major influencing factors are presented and discussed. It wasfound that residual gas pressure should be low enough to guarantee the unobstructedtransporfation of vapor steam and electron beam; the evaporation method and evapo-ration speed are up to the different vapor pressure deficit of compositions of raw mate-rials; and the substrate temperature could have great influence on the microstructureof the micro--layer laminates.
文摘Model evaluation using benchmark datasets is an important method to measure the capability of large language models(LLMs)in specific domains,and it is mainly used to assess the knowledge and reasoning abilities of LLMs.Therefore,in order to better assess the capability of LLMs in the agricultural domain,Agri-Eval was proposed as a benchmark for assessing the knowledge and reasoning ability of LLMs in agriculture.The assessment dataset used in Agri-Eval covered seven major disciplines in the agricultural domain:crop science,horticulture,plant protection,animal husbandry,forest science,aquaculture science,and grass science,and contained a total of 2283 questions.Among domestic general-purpose LLMs,DeepSeek R1 performed best with an accuracy rate of 75.49%.In the realm of international general-purpose LLMs,Gemini 2.0 pro exp 0205 standed out as the top performer,achieving an accuracy rate of 74.28%.As an LLMs in agriculture vertical,Shennong V2.0 outperformed all the LLMs in China,and the answer accuracy rate of agricultural knowledge exceeded that of all the existing general-purpose LLMs.The launch of Agri-Eval helped the LLM developers to comprehensively evaluate the model's capability in the field of agriculture through a variety of tasks and tests to promote the development of the LLMs in the field of agriculture.
基金Supported by the National Natural Science Foundation of China(12261018)Universities Key Laboratory of Mathematical Modeling and Data Mining in Guizhou Province(2023013)。
文摘In this paper,we establish and study a single-species logistic model with impulsive age-selective harvesting.First,we prove the ultimate boundedness of the solutions of the system.Then,we obtain conditions for the asymptotic stability of the trivial solution and the positive periodic solution.Finally,numerical simulations are presented to validate our results.Our results show that age-selective harvesting is more conducive to sustainable population survival than non-age-selective harvesting.
基金the World Climate Research Programme(WCRP),Climate Variability and Predictability(CLIVAR),and Global Energy and Water Exchanges(GEWEX)for facilitating the coordination of African monsoon researchsupport from the Center for Earth System Modeling,Analysis,and Data at the Pennsylvania State Universitythe support of the Office of Science of the U.S.Department of Energy Biological and Environmental Research as part of the Regional&Global Model Analysis(RGMA)program area。
文摘In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.
文摘Utilizing finite element analysis,the ballistic protection provided by a combination of perforated D-shaped and base armor plates,collectively referred to as radiator armor,is evaluated.ANSYS Explicit Dynamics is employed to simulate the ballistic impact of 7.62 mm armor-piercing projectiles on Aluminum AA5083-H116 and Steel Secure 500 armors,focusing on the evaluation of material deformation and penetration resistance at varying impact points.While the D-shaped armor plate is penetrated by the armor-piercing projectiles,the combination of the perforated D-shaped and base armor plates successfully halts penetration.A numerical model based on the finite element method is developed using software such as SolidWorks and ANSYS to analyze the interaction between radiator armor and bullet.The perforated design of radiator armor is to maintain airflow for radiator function,with hole sizes smaller than the bullet core diameter to protect radiator assemblies.Predictions are made regarding the brittle fracture resulting from the projectile core′s bending due to asymmetric impact,and the resulting fragments failed to penetrate the perforated base armor plate.Craters are formed on the surface of the perforated D-shaped armor plate due to the impact of projectile fragments.The numerical model accurately predicts hole growth and projectile penetration upon impact with the armor,demonstrating effective protection of the radiator assemblies by the radiator armor.
基金supported by the CAS Pioneer Hundred Talents Program and Second Tibetan Plateau Scientific Expedition Research Program(2019QZKK0708)as well as the Basic Research Program of Qinghai Province:Lithospheric Geomagnetic Field of the Qinghai-Tibet Plateau and the Relationship with Strong Earthquakes(2021-ZJ-969Q).
文摘The National Geophysical Data Center(NGDC)of the United States has collected aeromagnetic data for input into a series of geomagnetic models to improve model resolution;however,in the Tibetan Plateau region,ground-based observations remain insufficient to clearly reflect the characteristics of the region’s lithospheric magnetism.In this study,we evaluate the lithospheric magnetism of the Tibetan Plateau by using a 3D surface spline model based on observations from>200 newly constructed repeat stations(portable stations)to determine the spatial distribution of plateau geomagnetism,as well as its correlation with the tectonic features of the region.We analyze the relationships between M≥5 earthquakes and lithospheric magnetic field variations on the Tibetan Plateau and identify regions susceptible to strong earthquakes.We compare the geomagnetic results with those from an enhanced magnetic model(EMM2015)developed by the NGDC and provide insights into improving lithospheric magnetic field calculations in the Tibetan Plateau region.Further research reveals that these magnetic anomalies exhibit distinct differences from the magnetic-seismic correlation mechanisms observed in other tectonic settings;here,they are governed primarily by the combined effects of compressional magnetism,thermal magnetism,and deep thermal stress.This study provides new evidence of geomagnetic anomalies on the Tibetan Plateau,interprets them physically,and demonstrates their potential for identifying seismic hazard zones on the Plateau.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
文摘Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(2025)].In relation to seasonal forecasting and climate projection in the East Asian summer monsoon season,proper simulation of the seasonal migration of rain bands by models is a challenging and limiting factor[section 7.1 in Wang et al.(2025)].
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
基金funded by Prime Minister’s Research Fellowship(PMRF),grant number SB22230924OEPMRF008608.
文摘A hybrid model combining Fully Non-Linear Potential Flow Theory(FNPT)based on the Finite Element Method(FEM)and the Unified Navier-Stokes equation,using the 3D Improved Meshless Local Petrov Galerkin method with Rankine Source(IMLPG_R),is developed to study wave interactions with a porous layer.In previous studies,the above formulations are applied to wave interaction with fixed cylindrical structures.The present study extends this framework by integrating a unified governing equation within the hybrid modeling approach to capture the dynamics of wave interaction with porous media.The porous layers are employed to replicate the wave-dissipating behavior of the structure.A weak coupling strategy is implemented within a designated buffer zone,wherein field variables from the 2D Fully Nonlinear Potential Theory(FNPT)simulations are transferred to the 3D Improved Moving Least Squares-based Petrov-Galerkin(IMLPG_R)model at each time step.This domain decomposition significantly reduces computational cost compared to a full 3D simulation by partitioning the domain into two subregions:the FNPT domain representing the far-field without structures,and the IMLPG_R domain encompassing the porous region.The Unified Navier-Stokes formulation is extended by incorporating additional drag forces governed by Darcy’s law to model the resistance introduced by the porous medium.A stationary background node framework is utilized for interpolation by fluid particles at each time step to accommodate the porous representation.To enhance numerical stability and accuracy,particularly in the presence of sloping boundaries,the Particle Shifting Technique(PST)is integrated into the IMLPG_R model.This implementation involves a modified version of the PST algorithm,where key parameters such as the weight function,velocity ratio,and radius of influence are optimized for IMLPG_R.This is the first time the application of 3D IMLPG_R for porous structure has been reported.Further,the model is subsequently validated against experimental data.
基金Funded by State Railway Administration Research Project(No.2023JS007)National Natural Science Foundation of China(No.52438002)+1 种基金Research and Development Programs for Science and Technology of China Railways Corporation(No.J2023G003)New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘To investigate the influence of coarse aggregate parent rock properties on the elastic modulus of concrete,the mineralogical properties and stress-strain curves of granite and dolomite parent rocks,as well as the strength and elastic modulus of mortar and concrete prepared with mechanism aggregates of the corresponding lithology,and the stress-strain curves of concrete were investigated.In this paper,a coarse aggregate and mortar matrix bonding assumption is proposed,and a prediction model for the elastic modulus of mortar is established by considering the lithology of the mechanism sand and the slurry components.An equivalent coarse aggregate elastic modulus model was established by considering factors such as coarse aggregate particle size,volume fraction,and mortar thickness between coarse aggregates.Based on the elastic modulus of the equivalent coarse aggregate and the remaining mortar,a prediction model for the elastic modulus of the two and three components of concrete in series and then in parallel was established,and the predicted values differed from the measured values within 10%.It is proposed that the coarse aggregate elastic modulus in highstrength concrete is the most critical factor affecting the elastic modulus of concrete,and as the coarse aggregate elastic modulus increases by 27.7%,the concrete elastic modulus increases by 19.5%.
基金supported by the Cultivation Program for Major Scientific Research Projects of Harbin Institute of Technology(ZDXMPY20180109).
文摘Scalable simulation leveraging real-world data plays an essential role in advancing autonomous driving,owing to its efficiency and applicability in both training and evaluating algorithms.Consequently,there has been increasing attention on generating highly realistic and consistent driving videos,particularly those involving viewpoint changes guided by the control commands or trajectories of ego vehicles.However,current reconstruction approaches,such as Neural Radiance Fields and 3D Gaussian Splatting,frequently suffer from limited generalization and depend on substantial input data.Meanwhile,2D generative models,though capable of producing unknown scenes,still have room for improvement in terms of coherence and visual realism.To overcome these challenges,we introduce GenScene,a world model that synthesizes front-view driving videos conditioned on trajectories.A new temporal module is presented to improve video consistency by extracting the global context of each frame,calculating relationships of frames using these global representations,and fusing frame contexts accordingly.Moreover,we propose an innovative attention mechanism that computes relations of pixels within each frame and pixels in the corresponding window range of the initial frame.Extensive experiments show that our approach surpasses various state-of-the-art models in driving video generation,and the introduced modules contribute significantly to model performance.This work establishes a new paradigm for goal-oriented video synthesis in autonomous driving,which facilitates on-demand simulation to expedite algorithm development.
文摘Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching the construction of an emergency care system based on the concept of“linkage”,delving into its theoretical foundations,exploring innovative construction models,and analyzing practical cases.The study indicates that an emergency care system under the“linkage”concept can effectively integrate resources and enhance efficiency,providing new insights for improving the construction of the emergency care system.It aims to promote the development of the emergency care system towards a more scientific,efficient,and collaborative direction.
基金supported by the National Natural Science Foundation of China(Grant No.12272018)the National Key Basic Research Project(2022JCJQZD20600).
文摘Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.
文摘Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying issues with services,products,or customer experience,resulting in considerable income loss.Prediction of customer churn is a crucial task aimed at retaining customers and maintaining revenue growth.Traditional machine learning(ML)models often struggle to capture complex temporal dependencies in client behavior data.To address this,an optimized deep learning(DL)approach using a Regularized Bidirectional Long Short-Term Memory(RBiLSTM)model is proposed to mitigate overfitting and improve generalization error.The model integrates dropout,L2-regularization,and early stopping to enhance predictive accuracy while preventing over-reliance on specific patterns.Moreover,this study investigates the effect of optimization techniques on boosting the training efficiency of the developed model.Experimental results on a recent public customer churn dataset demonstrate that the trained model outperforms the traditional ML models and some other DL models,such as Long Short-Term Memory(LSTM)and Deep Neural Network(DNN),in churn prediction performance and stability.The proposed approach achieves 96.1%accuracy,compared with LSTM and DNN,which attain 94.5%and 94.1%accuracy,respectively.These results confirm that the proposed approach can be used as a valuable tool for businesses to identify at-risk consumers proactively and implement targeted retention strategies.
基金funded by the Office of the Vice-President for Research and Development of Cebu Technological University.
文摘This study demonstrates a novel integration of large language models,machine learning,and multicriteria decision-making to investigate self-moderation in small online communities,a topic under-explored compared to user behavior and platform-driven moderation on social media.The proposed methodological framework(1)utilizes large language models for social media post analysis and categorization,(2)employs k-means clustering for content characterization,and(3)incorporates the TODIM(Tomada de Decisão Interativa Multicritério)method to determine moderation strategies based on expert judgments.In general,the fully integrated framework leverages the strengths of these intelligent systems in a more systematic evaluation of large-scale decision problems.When applied in social media moderation,this approach promotes nuanced and context-sensitive self-moderation by taking into account factors such as cultural background and geographic location.The application of this framework is demonstrated within Facebook groups.Eight distinct content clusters encompassing safety,harassment,diversity,and misinformation are identified.Analysis revealed a preference for content removal across all clusters,suggesting a cautious approach towards potentially harmful content.However,the framework also highlights the use of other moderation actions,like account suspension,depending on the content category.These findings contribute to the growing body of research on self-moderation and offer valuable insights for creating safer and more inclusive online spaces within smaller communities.
基金Supported by the National Natural Science Foundation of China(Grant No.12261081).
文摘In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocally diffusive species and degenerately diffusive species.We prove that the traveling wavefronts are exponentially stable,when the initial perturbation around the traveling waves decays exponentially as x→-∞,but in other locations,the initial data can be arbitrarily large.The adopted methods are the weighted energy with the comparison principle and squeezing technique.
基金supported by ScientificResearch Fund of National Health Commission of the People’s Republic of China-Major Science and Technology Program for Medicine and Health in Zhejiang Province(WKJ-ZJ-2406).
文摘Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.
基金Construction and Application of Frailty Trajectory Prediction Model for Middle-aged and Elderly Patients with Upper Gastrointestinal Bleeding,Project Source:Sichuan Vocational College of Nursing(Project No.:2024ZRY25)。
文摘Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleeding(UGIB).Methods:A prospective cohort study was conducted,and 126 middle-aged and elderly patients with UGIB admitted from August 2024 to August 2025 were selected as the study subjects.The patients were divided into the intervention group(63 cases)and the control group(63 cases)based on whether they received nursing intervention based on frailty prediction models.The control group received routine care,while the intervention group,on the basis of routine care,used the FRAIL scale combined with laboratory indicators(albumin,hemoglobin,etc.)to establish a predictive model to evaluate patients within 24 hours of admission,and implemented multi-dimensional targeted nursing intervention for pre-frailty or frailty patients screened out.The incidence of frailty,rebleeding rate,average length of stay,hospitalization cost,and nursing satisfaction during hospitalization were compared between the two groups.Results:The incidence of frailty during hospitalization in the intervention group was 11.1%(7 cases/63 cases),significantly lower than 31.7%(20 cases/63 cases)in the control group,and the difference was statistically significant(p<0.05).The rebleeding rate of 4.8%vs 12.7%,the average length of stay of(7.2±1.5)days vs(9.1±2.2)days,and the average hospitalization cost of(23,000±6,000)yuan vs(28,000±7,000)yuan in the intervention group were all lower than those in the control group(all p<0.05).The nursing satisfaction score of the intervention group(93.5±4.2)points was higher than that of the control group(86.3±5.8)points(p<0.05).Conclusion:The frailty prediction model applied to the peri-hospitalization care of middle-aged and elderly patients with UGIB can effectively identify frailty risk.Through early targeted intervention,the incidence of frailty and rebleeding rate can be reduced,the length of hospital stay can be shortened,medical expenses can be reduced,and nursing satisfaction can be improved,which has clinical promotion value.
