In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scannin...In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.展开更多
Laboratory experiments have been conducted to study the flow field in a cyclone static micro-bubble flotation column. The method of Particle Image Velocimetry (PIV) was used. The flow field velocity distribution in bo...Laboratory experiments have been conducted to study the flow field in a cyclone static micro-bubble flotation column. The method of Particle Image Velocimetry (PIV) was used. The flow field velocity distribution in both cross section and longitudinal section within cyclonic zone was studied for different circulating volumes. The cross sectional vortex was also analyzed. The results show that in cross section as the circulating volume increases from 0.187 to 0.350 m 3 /h, the flow velocity ranges from 0 to 0.68 m/s. The flow field is mainly a non-vortex potential flow that forms a free vortex without outside energy input. In the cyclonic region the vortex deviates from the center of the flotation column because a single tangential opening introduces circulating fluid into the column. The tangential component of the velocity plays a defining role in the cross section. In the longitudinal section the velocity ranges from 0 to 0.08 m/s. The flow velocity increases as does the circulating volume. Advantageous mineral separation conditions arise from the combined effects of cyclonic flow in cross and longitudinal section.展开更多
This study aimed to investigate the effect of varying pyrite(Py)content on copper(Cu)in the presence of different regrinding conditions,which were altered using different types of grinding media:iron,ceramic balls,and...This study aimed to investigate the effect of varying pyrite(Py)content on copper(Cu)in the presence of different regrinding conditions,which were altered using different types of grinding media:iron,ceramic balls,and their mixture,followed by flotation in the cleaner stage.The flotation performance of rough Cu concentrate can be improved by changing the regrinding conditions based on the Py content.Scanning electron microscopy,X-ray spectrometry,ethylenediaminetetraacetic acid disodium salt extraction,and X-ray photoelectron spectroscopy studies illustrated that when the Py content was high,the use of iron media in regrinding promoted the generation of hydrophilic Fe OOH on the surface of Py and improved the Cu grade.The ceramic medium with a low Py content prevented excessive Fe OOH from covering the surface of chalcopyrite(Cpy).Electrochemical studies further showed that the galvanic corrosion current of Cpy-Py increased with the addition of Py and became stronger with the participation of iron media.展开更多
Mineral fulvic acid(MFA)was used as an eco-friendly pyrite depressant to recover chalcopyrite by flotation with the use of the butyl xanthate as a collector.Flotation experiments showed that MFA produced a stronger in...Mineral fulvic acid(MFA)was used as an eco-friendly pyrite depressant to recover chalcopyrite by flotation with the use of the butyl xanthate as a collector.Flotation experiments showed that MFA produced a stronger inhibition effect on pyrite than on chalcopyrite.The separation of chalcopyrite from pyrite was realized by introducing 150 mg/L MFA at a pulp pH of approximately 8.0.The copper grade,copper recovery,and separation efficiency were 28.03%,84.79%,and 71.66%,respectively.Surface adsorption tests,zeta potential determinations,and localized electrochemical impedance spectroscopy tests showed that more MFA adsorbed on pyrite than on chalcopyrite,which weakened the subsequent interactions between pyrite and the collector.Atomic force microscope imaging further confirmed the adsorption of MFA on pyrite,and X-ray photoelectron spectroscopy results indicated that hydrophilic Fe-based species on the pyrite surfaces increased after exposure of pyrite to MFA,thereby decreasing the floatability of pyrite.展开更多
Tin is a critical metal for various industries,making its recovery from low-grade cassiterite ores crucial.This study aimed to optimize the flotation recovery of cassiterite using multi-component collector systems.Sev...Tin is a critical metal for various industries,making its recovery from low-grade cassiterite ores crucial.This study aimed to optimize the flotation recovery of cassiterite using multi-component collector systems.Several collectors were initially selected through micro-flotation tests,leading to the identification of optimal proportions for a four-component collector system(SHA-OHA-SPA-DBIA in a 4:3:2:1 ratio).Molecular dynamics simulations and surface tension tests were used to investigate the micellar behavior of these collectors in aqueous solution.The adsorption characteristics were quantified using microcalorimetry,enabling the determination of collection entropy and changes in Gibbs free energy.The four-component collector system showed the highest entropy change and the most favorable Gibbs free energy,leading to a cassiterite recovery of above 90%at a concentration of 8.0×10^(5)mol/L.Various analytical techniques were employed to systematically characterize the adsorption mechanism.The findings revealed a positive correlation between the adsorption products formed by the multicomponent collectors on the cassiterite surface and the entropy changes.Industrial-scale testing of the high-entropy collector system produced a tin concentrate with an Sn grade of 6.17%and an Sn recovery of 82.43%,demonstrating its substantial potential for practical applications in cassiterite flotation.展开更多
To investigate the mechanisms of how nanobubbles enhance the flotation separation performance of galena from pyrite,the effects of nanobubbles on the surface properties of galena and pyrite and the interactions betwee...To investigate the mechanisms of how nanobubbles enhance the flotation separation performance of galena from pyrite,the effects of nanobubbles on the surface properties of galena and pyrite and the interactions between mineral particles and air bubbles were examined in this study.Various analytical techniques,including focused beam reflectance measurement(FBRM),three-phase contact line(TPCL)analysis,atomic force microscopy(AFM),and contact angle measurement,were employed.It has been demonstrated that nanobubbles significantly enhanced the flotation recovery of galena and its flotation selectivity from pyrite,as compared to the conventional flotation process.The preferential formation of nanobubbles on the galena surface,which is more hydrophobic than pyrite surface,further increased the surface hydrophobicity and agglomeration of galena particles.The introduction of nanobubbles into the flotation system also increased in the maximum TPCL length and detachment length between the galena surface and bubbles,contributing to the enhanced flotation efficiency.展开更多
Gold ores in the Jiaozhou region of China are characterized by their abundant reserves,low grade,fine dissemination,and chal-lenges in upgrading.Froth flotation,with xanthate as the collector,is a commonly employed me...Gold ores in the Jiaozhou region of China are characterized by their abundant reserves,low grade,fine dissemination,and chal-lenges in upgrading.Froth flotation,with xanthate as the collector,is a commonly employed method for enriching auriferous pyrite from these ores.This study aimed to develop a more efficient flotation process by utilizing cavitation nanobubbles for a low-grade gold ore.Batch flotation tests demonstrated that nanobubbles significantly enhanced the flotation performance of auriferous pyrite,as evidenced by improved concentrate S and Au grades and their recoveries.The mechanisms underlying this enhancement were explored by investigat-ing surface nanobubble(SNB)formation,bulk nanobubble(BNB)attachment to hydrophobic pyrite surfaces,and nanobubble-induced agglomeration using atomic force microscopy(AFM)and focused beam reflectance measurement(FBRM).The results revealed that nan-obubble coverage on the pyrite surface is a critical factor influencing surface hydrophobicity and agglomeration.SNBs exhibited higher coverage on pyrite surfaces with increased surface hydrophobicity,flow rate,and cavitation time.Similarly,BNB attachment on pyrite surfaces was significantly increased with surface hydrophobicity and cavitation time.Enhanced surface hydrophobicity,along with higher flow rates and cavitation times,promoted pyrite particle agglomeration owing to the increased nanobubble coverage,ultimately leading to improved flotation performance.展开更多
The combined reagents of sodium N-oleoylsarcosinate(SNOS)with metal ions(Ca(Ⅱ),Mg(Ⅱ),Cu(Ⅱ),and Pb(Ⅱ))was employed to facilitate the separation of lepidolite from feldspar.The synergistic interaction mechanism of t...The combined reagents of sodium N-oleoylsarcosinate(SNOS)with metal ions(Ca(Ⅱ),Mg(Ⅱ),Cu(Ⅱ),and Pb(Ⅱ))was employed to facilitate the separation of lepidolite from feldspar.The synergistic interaction mechanism of this combined reagent was systematically investigated via contact angle measurements,AFM,FTIR,species distribution calculations,and DFT calculations.The results suggested that Ca(Ⅱ)exhibited the best selectivity for activating lepidolite flotation.SNOS was chemically adsorbed on the Ca(Ⅱ)-activated lepidolite surface with an adsorption energy of−1248.91 kJ/mol while a lower adsorption energy of−598.84 kJ/mol of SNOS on Ca(Ⅱ)-activated feldspar was calculated.Therefore,this combination of SNOS and Ca(Ⅱ)is a promising reagent scheme for the efficient recovery of lithium from aluminosilicate ore.展开更多
The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces...The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces the recovery of titanaugite while having no evident impact on ilmenite flotation.Subsequent bench-scale flotation tests further confirm a remarkable improvement in separation efficiency upon the introduction of AP.Contact angle and adsorption tests reveal a stronger affinity of AP towards the titanaugite surface in comparison to ilmenite.Zeta potential measurements and X-ray photoelectron spectroscopy(XPS)analyses exhibit favorable adsorption characteristics of AP on titanaugite,resulting from a synergy of electrostatic attraction and chemical interaction.In contrast,electrostatic repulsion hinders any significant interaction between AP and the ilmenite surface.These findings highlight the potential of AP as a highly efficient depressant for ilmenite flotation,paving the way for reduced reliance on sulfuric acid in the industry.展开更多
In order to reveal the effect of 2-hydroxy-3-naphthyl hydroxamic acid(H205)on the flotation behavior and action mechanism of bastnaesite,single-mineral flotation experiments of bastnaesite were conducted.The flotation...In order to reveal the effect of 2-hydroxy-3-naphthyl hydroxamic acid(H205)on the flotation behavior and action mechanism of bastnaesite,single-mineral flotation experiments of bastnaesite were conducted.The flotation recovery of bastnaesites can be achieved more than 90%when the aeration rate is 40 mL/min,the rotational speed is 200 r/min,the H205 dosage is 120 mg/L,and the pulp pH ranges from 7 to 9.The action mechanism of H205 on the surface of bastnaesite was studied by simultaneous thermogravimetry and differential scanning calorimetry(TG-DSC),Zeta potential measurements,Fourier transform-infrared spectra(FT-IR)and X-ray photoelectron spectroscopy(XPS).These analysis results show that under suitable flotation conditions,H205 has an obvious adsorption phenomenon on the surface of bastnaesite.The adsorption involves electrostatic interactions and chemical interactions,namely H205 has a strong collecting ability of bastnaesite due to the synergism of electrostatic adsorption and chemical adsorption.This study systematically reveals the flotation behavior and adsorption mechanism of H205 on the surface of bastnaesite,and provides useful theoretical guidance for efficient flotation separation of bastnaesite.展开更多
Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify ...Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify the phase composition and floatability of rare earths obtained after HMPT owing to the associated phase transformations.This study explored the mineralogical characteristics and separation behavior of rare earths in HMPT-treated iron tailings.Process mineralogy studies conducted via BGRIMM process mineralogy analysis and X-ray diffraction revealed that the main valuable minerals in the tailings included rare-earth oxides(9.15wt%),monazite(5.31wt%),and fluorite(23.52wt%).The study also examined the impact of mineral liberation and gangue mineral intergrowth on flotation performance.Flotation tests achieved a rare-earth oxide(REO)grade of 74.12wt% with a recovery of 34.17% in open-circuit flotation,whereas closed-circuit flotation resulted in a REO grade of 60.27wt% with a recovery of 73%.Transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy revealed that monazite remained stable during the HMPT process,while bastnaesite was transformed into Ce_(7)O_(12)and CeF_(3),leading to increased collector consumption.Nonetheless,the HMPT process did not significantly affect the flotation performance of rare earths.The enrichment of fluorite in the tailings highlighted its further recovery potential.The integration of HMPT with magnetic separation and flotation presents an efficient strategy for recovering rare earths,iron,and fluorite from Bayan Obo ores.展开更多
The size and distribution patterns of bubbles within a laboratory-scale coarse-particle flotation column were examined using a high-speed camera-based dynamic measurement system.The effects of operational parameters s...The size and distribution patterns of bubbles within a laboratory-scale coarse-particle flotation column were examined using a high-speed camera-based dynamic measurement system.The effects of operational parameters such as superficial water velocity,air-flow rate,and frother dosage on bubble-size and distribution characteristics were investigated.This study aims to provide theoretical support for enabling fluidized-bed flotation within coarse-particle flotation columns.The results show that negative pressure for air inspiratory and bubble formation is generated by passing a high-speed jet through a throat,and the greatest number of bubbles are observed under natural inspiratory state at an air-liquid ratio of 1:3-1:2.5.Increasing the air-flow rate transforms the bubble diameter distribution from a peaked distribution to a more uniform distribution.Furthermore,the frother narrows the range of bubble-size distribution.A positive correlation exists between the bubble Sauter diameter and air-flow rate,with the bubble Sauter diameter bearing a negative correlation with the superficial water velocity and frother concentration.展开更多
Flotation behavior of stibiconite after sulfidation roasting with sulfur at a high temperature and the sulfidation mechanisms were investigated by ultraviolet spectrophotometry,X-ray diffraction(XRD)combining with the...Flotation behavior of stibiconite after sulfidation roasting with sulfur at a high temperature and the sulfidation mechanisms were investigated by ultraviolet spectrophotometry,X-ray diffraction(XRD)combining with thermodynamic calculation,X-ray photoelectron spectroscopy(XPS)and electron probe microanalysis(EPMA).The XRD and thermodynamic analyses revealed that the Sb_(3)O_(6)(OH)was reduced into Sb_(2)O_(4)and Sb_(2)O_(3),and was transformed into Sb_(2)S_(3)after introducing sulfur at high temperatures.Flotation test results show that flotation recovery of the stibiconite after sulfidation reaches 90.3%.Ultraviolet spectrophotometry tests confirm that adsorption capacity of sodium butyl xanthate(SBX)on surface of the roasted products has a positive relationship with S/Sb mole ratio.XPS analyses indicate that Sb-bearing species including mainly Sb_(2)S_(3),Sb_(2)O_(3)and Sb_(2)(SO_(4))_(3) are formed at the surface of particle after sulfidation.The EPMA analyses verify that the Sb_(2)S_(3)is generated at the outer layer of sample after sulfidation roasting,but the particle interior is mainly composed of antimony oxides.The sulfur atmosphere induces the outward migration of oxygen to form Sb_(2)O_(4).Then,the Sb_(2)O_(4)is transformed into Sb_(2)O_(3)in two pathways,and the Sb_(2)S_(3)is formed.These findings will provide theoretical support for recovering antimony from antimony oxide ores by xanthate flotation methods.展开更多
In recent years,the study of chalcopyrite and pyrite flotation surfaces using computational chemistry methods has made significant progress.However,current computational methods are limited by the small size of their ...In recent years,the study of chalcopyrite and pyrite flotation surfaces using computational chemistry methods has made significant progress.However,current computational methods are limited by the small size of their systems and insufficient consideration of hydration and temperature effects,making it difficult to fully replicate the real flotation environment of chalcopyrite and pyrite.In this study,we employed the self-consistent charge density functional tight-binding(SCC-DFTB)parameterization method to develop a parameter set,CuFeOrg,which includes the interactions between Cu-Fe-C-H-O-N-S-P-Zn elements,to investigate the surface interactions in large-scale flotation systems of chalcopyrite and pyrite.The results of bulk modulus,atomic displacement,band structure,surface relaxation,surface Mulliken charge distribution,and adsorption tests of typical flotation reagents on mineral surfaces demonstrate that CuFeOrg achieves DFT-level accuracy while significantly outperforming DFT in computational efficiency.By constructing large-scale hydration systems of mineral surfaces,as well as large-scale systems incorporating the combined interactions of mineral surfaces,flotation reagents,and hydration,we more realistically reproduce the actual flotation environment.Furthermore,the dynamic analysis results are consistent with mineral surface contact angle experiments.Additionally,CuFeOrg lays the foundation for future studies of more complex and diverse chalcopyrite and pyrite flotation surface systems.展开更多
The global reliance on phosphate rock for agriculture and other industries,coupled with chemical regulations in developed countries,has driven the search for green alternatives in apatite flotation.This review investi...The global reliance on phosphate rock for agriculture and other industries,coupled with chemical regulations in developed countries,has driven the search for green alternatives in apatite flotation.This review investigates eco-friendly collectors’effectiveness in promoting sustainable mineral processing,guiding future alternatives to traditional reagents.The manuscript discussed the surface properties of apatite and its interaction with eco-friendly collectors,assessing existing fundamental studies.This study sought to:(1)define,organize,and classify“eco-friendly”collectors;(2)evaluate their effect in IEP and contact angle;(3)provide a better understanding of the adsorption behavior of the different fatty acid chains into apatite surface;(4)assess their ability to reversely and directly float apatite;(5)address gaps to achieve selectivity and process optimization.Outcomes demonstrated that fatty acids are largely applied,but other renewable sources of these reagents have been promisingly evaluated.In addition,other natural reagents have been tested,and new green synthetics have demonstrated synergistic effects when combined with fatty acids,yielding significant improvements in grade and recovery.However,collector effectiveness varies with ore characteristics,like particle size and surface properties,which remain underexplored.Future research should design tailored collectors that align with mineralogical differences to enhance selectivity.展开更多
In froth flotation,overall recovery of the floatable particles consists of true recovery and recovery by entrainment,where entrainment refers to the non-selective recovery of particles in the concentrate.To understand...In froth flotation,overall recovery of the floatable particles consists of true recovery and recovery by entrainment,where entrainment refers to the non-selective recovery of particles in the concentrate.To understand and optimize the flotation process with regard to process conditions,it is essential to distinguish true flotation recovery from overall recovery.The established methods rely on tailored flotation experiments,unrealistic flotation conditions,or using external tracers which can be different in density and crystal structure to the mineral(s) of interest.This study presents an approach to utilize naturally occuring suitable tracers to estimate the entrainment component from overall recovery of individual particles by establishing a relationship between their settling velocity coefficient and recovery probability.Recovery probabilities of individual particles are computed using particle-based separation modelling.The approach is demonstrated for a copper ore,where naturally occurring rutile was used as the tracer to determine the entrained component of the overall recovery of chalcopyrite particles.Laboratory flotation experiments revealed that entrainment accounted for up to 6% of the overall recovery probability of fully liberated chalcopyrite particles in the fine size fractions.This approach provides a practical method for entrainment correction enabling a more accurate evaluation of true flotation recovery.展开更多
n-octylphosphonic acid(OPA)was introduced as a novel collector for ilmenite flotation and its effectiveness was compared with the conventional chelating collector,benzohydroxamic acid(BHA).Micro-flotation tests demons...n-octylphosphonic acid(OPA)was introduced as a novel collector for ilmenite flotation and its effectiveness was compared with the conventional chelating collector,benzohydroxamic acid(BHA).Micro-flotation tests demonstrated that OPA was a highly effective and selective collector for separating ilmenite from titanaugite over acidic conditions(optimal pH around 3),which was also supported by adsorption amount measurements.X-ray photoelectron spectroscopy(XPS)tests indicated that the chemisorption of OPA onto ilmenite surface was much stronger than that of BHA.Solution chemistry diagram analyses indicated that OPA could dissociate well at pH 3.0 and mostly exist in anion form.DFT calculations further confirmed that OPA was much easier to adsorb onto ilmenite surface with shorter bond length and lower adsorption energy in comparison with BHA.Therefore,OPA maintained good collecting ability and selectivity for ilmenite flotation in the strongly acidic pulp,providing valuable insights into new collector design and development.展开更多
The effects of combined microwave and hydrogen peroxide(H_(2)O_(2))oxidation on the flotation separation of molybdenite and chalcopyrite,as well as the underlying mechanism were investigated via microflotation,zeta po...The effects of combined microwave and hydrogen peroxide(H_(2)O_(2))oxidation on the flotation separation of molybdenite and chalcopyrite,as well as the underlying mechanism were investigated via microflotation,zeta potential,contact angle,X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM)and atomic force microscopy(AFM)analyses.The microflotation experiments showed that the effective inhibition of chalcopyrite can be obtained through combined oxidation pretreatments with low microwave power and H_(2)O_(2)consumption.The zeta potential,contact angle and XPS analyses indicated that the surface hydrophobicity of molybdenite changed minimally after different treatments,whereas significant amounts of hydrophilic oxidation species were formed on the surface of chalcopyrite,thus decreasing its surface hydrophobicity and floatability.Moreover,the SEM and AFM analyses indicated that more uniform oxidative products were formed on the chalcopyrite surface,further significantly increasing the surface roughness.展开更多
Lepidolite,feldspar,and quartz are silicate minerals with similar chemical properties,complicating their flotation separation.Current collector systems require strong acidic conditions for effective separation but sti...Lepidolite,feldspar,and quartz are silicate minerals with similar chemical properties,complicating their flotation separation.Current collector systems require strong acidic conditions for effective separation but still face challenges related to low separation efficiency and recovery rates.This study proposed a novel collector,ammonium dodecylsulfate(ALS),to selectively extract lepidolite from feldspar and quartz using highly selective flotation methods.Microflotation experiments showed that ALS significantly outperforms other collectors in collecting lepidolite compared to feldspar and quartz.At pH 7,lepidolite recovery reached 95%,while flotation recoveries for both feldspar and quartz were below 10%.Mixed pure mineral flotation tests revealed that at pH 7 and ALS concentration of 2.5×10^(-4) mol·L^(−1),the Li_(2)O content in the concentrate was 4.21%,with a recovery rate of 95.01%.Separation efficiency and Gaudin selectivity index values were recorded.Solution chemical analyses showed that at pH 7,ALS completely ionizes into NH_(4)^(+)and CH_(3)(CH_(2))_(11)OSO_(3)^(−).Various analytical techniques,including high-speed photography imaging,contact angle measurements,Fourier transform infrared spectroscopy,zeta potential analysis,and X-ray photoelectron spectroscopy,confirmed that the anion CH_(3)(CH_(2))_(11)OSO_(3)^(−)adsorbs chemically onto aluminum sites on lepidolite's surface,while the cation NH_(4)+binds through electrostatic interactions and hydrogen bonding.The combined adsorption of these ions on lepidolite's surface enhanced its hydrophobicity.In contrast,ALS showed minimal adsorption on feldspar and quartz surfaces,which remained hydrophilic,enabling efficient selective flotation separation of lepidolite from both feldspar and quartz.展开更多
This study investigated the effect of konjac glucomannan(KGM)on the flotation separation of calcite and scheelite.Micro-flotation tests showed that under the action of 50 mg/L KGM,the floatability of calcite notably d...This study investigated the effect of konjac glucomannan(KGM)on the flotation separation of calcite and scheelite.Micro-flotation tests showed that under the action of 50 mg/L KGM,the floatability of calcite notably decreased,while the impact on scheelite was negligible,resulting in a recovery difference of 82.53%.Fourier transform infrared(FTIR)spectroscopy and atomic force micro-scopy(AFM)analyses indicated the selective adsorption of KGM on the calcite surface.Test results of the zeta potential and UV-visible absorption spectroscopy revealed that KGM prevented the adsorption of sodium oleate on the calcite surface.X-ray photoelectron spec-troscopy(XPS)analysis further confirmed the chemical adsorption of KGM on the calcite surface and the formation of Ca(OH)_(2).The density functional theory(DFT)simulation results were consistent with the flotation tests,demonstrating the strong adsorption perform-ance of KGM on the calcite surface.This study offers a pathway for highly sustainable and cost-effective mineral processing by utilizing the unique properties of biopolymers such as KGM to separate valuable minerals from gangue minerals.展开更多
基金Projects 2008BAB31B01 supported by the National Key Technology R&D Program in the 11th Five-Year Plan of China50834006 by the National Natural Science Foundation of China
文摘In our study we investigated a refractory copper-nickel sulfide ore separation by using a cyclonic-static micro-bubble flotation column (FCSMC). The process mineralogy of the main products was studied. Using a scanning electron microscope-energy dispersive system (SEM-EDS) and an X-ray spectrometer the mineral category and content of samples were analyzed. By using a mineral liberation analyzer (MLA) the mineral liberation characteristics were revealed. It is shown that in roughing feed the monomers liberation degree of nickel pyrite and chalcopyrite take up 84.11% and 88.82%, respectively. In tailings, the lost nickel pyrite and chalcopyrite are mainly monomers. Therefore, strengthening the micro-fine particle recovery capacity is the key to increase recovery.
基金the State Key Basic Research Program of China (No. 2012CB214905)Key Program of National Natural Science Foundation of China (No. 500834006)the National Natural Science Foundation of China (No. 50974119) for financial support
文摘Laboratory experiments have been conducted to study the flow field in a cyclone static micro-bubble flotation column. The method of Particle Image Velocimetry (PIV) was used. The flow field velocity distribution in both cross section and longitudinal section within cyclonic zone was studied for different circulating volumes. The cross sectional vortex was also analyzed. The results show that in cross section as the circulating volume increases from 0.187 to 0.350 m 3 /h, the flow velocity ranges from 0 to 0.68 m/s. The flow field is mainly a non-vortex potential flow that forms a free vortex without outside energy input. In the cyclonic region the vortex deviates from the center of the flotation column because a single tangential opening introduces circulating fluid into the column. The tangential component of the velocity plays a defining role in the cross section. In the longitudinal section the velocity ranges from 0 to 0.08 m/s. The flow velocity increases as does the circulating volume. Advantageous mineral separation conditions arise from the combined effects of cyclonic flow in cross and longitudinal section.
基金financially supported by the National Key Research and Development Plan of China(No.2022YFC2904603)the National Natural Science Foundation of China(No.52174268)。
文摘This study aimed to investigate the effect of varying pyrite(Py)content on copper(Cu)in the presence of different regrinding conditions,which were altered using different types of grinding media:iron,ceramic balls,and their mixture,followed by flotation in the cleaner stage.The flotation performance of rough Cu concentrate can be improved by changing the regrinding conditions based on the Py content.Scanning electron microscopy,X-ray spectrometry,ethylenediaminetetraacetic acid disodium salt extraction,and X-ray photoelectron spectroscopy studies illustrated that when the Py content was high,the use of iron media in regrinding promoted the generation of hydrophilic Fe OOH on the surface of Py and improved the Cu grade.The ceramic medium with a low Py content prevented excessive Fe OOH from covering the surface of chalcopyrite(Cpy).Electrochemical studies further showed that the galvanic corrosion current of Cpy-Py increased with the addition of Py and became stronger with the participation of iron media.
基金supported by Fundamental Research Projects of Yunnan Province,China(Nos.202101BE070001-009,202301AU070189).
文摘Mineral fulvic acid(MFA)was used as an eco-friendly pyrite depressant to recover chalcopyrite by flotation with the use of the butyl xanthate as a collector.Flotation experiments showed that MFA produced a stronger inhibition effect on pyrite than on chalcopyrite.The separation of chalcopyrite from pyrite was realized by introducing 150 mg/L MFA at a pulp pH of approximately 8.0.The copper grade,copper recovery,and separation efficiency were 28.03%,84.79%,and 71.66%,respectively.Surface adsorption tests,zeta potential determinations,and localized electrochemical impedance spectroscopy tests showed that more MFA adsorbed on pyrite than on chalcopyrite,which weakened the subsequent interactions between pyrite and the collector.Atomic force microscope imaging further confirmed the adsorption of MFA on pyrite,and X-ray photoelectron spectroscopy results indicated that hydrophilic Fe-based species on the pyrite surfaces increased after exposure of pyrite to MFA,thereby decreasing the floatability of pyrite.
基金supported by Yunnan Science and Technology Leading Talent Project(No.202305AB350005)。
文摘Tin is a critical metal for various industries,making its recovery from low-grade cassiterite ores crucial.This study aimed to optimize the flotation recovery of cassiterite using multi-component collector systems.Several collectors were initially selected through micro-flotation tests,leading to the identification of optimal proportions for a four-component collector system(SHA-OHA-SPA-DBIA in a 4:3:2:1 ratio).Molecular dynamics simulations and surface tension tests were used to investigate the micellar behavior of these collectors in aqueous solution.The adsorption characteristics were quantified using microcalorimetry,enabling the determination of collection entropy and changes in Gibbs free energy.The four-component collector system showed the highest entropy change and the most favorable Gibbs free energy,leading to a cassiterite recovery of above 90%at a concentration of 8.0×10^(5)mol/L.Various analytical techniques were employed to systematically characterize the adsorption mechanism.The findings revealed a positive correlation between the adsorption products formed by the multicomponent collectors on the cassiterite surface and the entropy changes.Industrial-scale testing of the high-entropy collector system produced a tin concentrate with an Sn grade of 6.17%and an Sn recovery of 82.43%,demonstrating its substantial potential for practical applications in cassiterite flotation.
基金financial support from the Major Science and Technology Special Project of Yunnan Province,China(No.202302AB080012)the National Natural Science Foundation of China(No.52204274)the Shandong Provincial Natural Science Foundation,China(No.ZR2021QE122).
文摘To investigate the mechanisms of how nanobubbles enhance the flotation separation performance of galena from pyrite,the effects of nanobubbles on the surface properties of galena and pyrite and the interactions between mineral particles and air bubbles were examined in this study.Various analytical techniques,including focused beam reflectance measurement(FBRM),three-phase contact line(TPCL)analysis,atomic force microscopy(AFM),and contact angle measurement,were employed.It has been demonstrated that nanobubbles significantly enhanced the flotation recovery of galena and its flotation selectivity from pyrite,as compared to the conventional flotation process.The preferential formation of nanobubbles on the galena surface,which is more hydrophobic than pyrite surface,further increased the surface hydrophobicity and agglomeration of galena particles.The introduction of nanobubbles into the flotation system also increased in the maximum TPCL length and detachment length between the galena surface and bubbles,contributing to the enhanced flotation efficiency.
基金support from the National Natural Science Foundation of China(No.52204274)the Shandong Provincial Natural Science Foundation,China(No.ZR2021QE122)+1 种基金Shandong Provincial Department of Science and Technology Key Project,China(No.2023TZXD021)Shandong Provincial Department of Science and Technology,China(No.ZTYJY-KY-2033-11).
文摘Gold ores in the Jiaozhou region of China are characterized by their abundant reserves,low grade,fine dissemination,and chal-lenges in upgrading.Froth flotation,with xanthate as the collector,is a commonly employed method for enriching auriferous pyrite from these ores.This study aimed to develop a more efficient flotation process by utilizing cavitation nanobubbles for a low-grade gold ore.Batch flotation tests demonstrated that nanobubbles significantly enhanced the flotation performance of auriferous pyrite,as evidenced by improved concentrate S and Au grades and their recoveries.The mechanisms underlying this enhancement were explored by investigat-ing surface nanobubble(SNB)formation,bulk nanobubble(BNB)attachment to hydrophobic pyrite surfaces,and nanobubble-induced agglomeration using atomic force microscopy(AFM)and focused beam reflectance measurement(FBRM).The results revealed that nan-obubble coverage on the pyrite surface is a critical factor influencing surface hydrophobicity and agglomeration.SNBs exhibited higher coverage on pyrite surfaces with increased surface hydrophobicity,flow rate,and cavitation time.Similarly,BNB attachment on pyrite surfaces was significantly increased with surface hydrophobicity and cavitation time.Enhanced surface hydrophobicity,along with higher flow rates and cavitation times,promoted pyrite particle agglomeration owing to the increased nanobubble coverage,ultimately leading to improved flotation performance.
基金financial support from the National Natural Science Foundation of China(Nos.U2067201,52204300)the National 111 Project,China(No.B14034)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2021zzts0297).
文摘The combined reagents of sodium N-oleoylsarcosinate(SNOS)with metal ions(Ca(Ⅱ),Mg(Ⅱ),Cu(Ⅱ),and Pb(Ⅱ))was employed to facilitate the separation of lepidolite from feldspar.The synergistic interaction mechanism of this combined reagent was systematically investigated via contact angle measurements,AFM,FTIR,species distribution calculations,and DFT calculations.The results suggested that Ca(Ⅱ)exhibited the best selectivity for activating lepidolite flotation.SNOS was chemically adsorbed on the Ca(Ⅱ)-activated lepidolite surface with an adsorption energy of−1248.91 kJ/mol while a lower adsorption energy of−598.84 kJ/mol of SNOS on Ca(Ⅱ)-activated feldspar was calculated.Therefore,this combination of SNOS and Ca(Ⅱ)is a promising reagent scheme for the efficient recovery of lithium from aluminosilicate ore.
基金supported by the National Key Research and Development Program of China(No.2019YFC1803501)the National Natural Science Foundation of China(No.52074357)+2 种基金the Natural Science Foundation of Hunan Province,China(No.2022JJ30713)the Vanadium Titanium Union Foundationthe Project of Technology Innovation Center for Comprehensive Utilization of Strategic Mineral Resources,Ministry of Natural Resources,China。
文摘The potential of 2-amino-1-propanol(AP)as a novel depressant in selectively floating ilmenite from titanaugite under weakly acidic conditions was investigated.Micro-flotation results show that AP significantly reduces the recovery of titanaugite while having no evident impact on ilmenite flotation.Subsequent bench-scale flotation tests further confirm a remarkable improvement in separation efficiency upon the introduction of AP.Contact angle and adsorption tests reveal a stronger affinity of AP towards the titanaugite surface in comparison to ilmenite.Zeta potential measurements and X-ray photoelectron spectroscopy(XPS)analyses exhibit favorable adsorption characteristics of AP on titanaugite,resulting from a synergy of electrostatic attraction and chemical interaction.In contrast,electrostatic repulsion hinders any significant interaction between AP and the ilmenite surface.These findings highlight the potential of AP as a highly efficient depressant for ilmenite flotation,paving the way for reduced reliance on sulfuric acid in the industry.
基金Project supported by the Natural Science Foundation Innovation Group Project of Hubei Province(2023AFA044)the National Natural Science Foundation of China(52222405)+1 种基金the Science and Technology Research Project of Education Department of Hubei Province(Q20221505)the China Postdoctoral Science(2023M731041)。
文摘In order to reveal the effect of 2-hydroxy-3-naphthyl hydroxamic acid(H205)on the flotation behavior and action mechanism of bastnaesite,single-mineral flotation experiments of bastnaesite were conducted.The flotation recovery of bastnaesites can be achieved more than 90%when the aeration rate is 40 mL/min,the rotational speed is 200 r/min,the H205 dosage is 120 mg/L,and the pulp pH ranges from 7 to 9.The action mechanism of H205 on the surface of bastnaesite was studied by simultaneous thermogravimetry and differential scanning calorimetry(TG-DSC),Zeta potential measurements,Fourier transform-infrared spectra(FT-IR)and X-ray photoelectron spectroscopy(XPS).These analysis results show that under suitable flotation conditions,H205 has an obvious adsorption phenomenon on the surface of bastnaesite.The adsorption involves electrostatic interactions and chemical interactions,namely H205 has a strong collecting ability of bastnaesite due to the synergism of electrostatic adsorption and chemical adsorption.This study systematically reveals the flotation behavior and adsorption mechanism of H205 on the surface of bastnaesite,and provides useful theoretical guidance for efficient flotation separation of bastnaesite.
基金the financial support received from the Key Program of National Natural Science Foundation of China(No.52130406)the National Key R&D Program of China(Nos.2021YFC2901000 and 2022YFC2905800)+1 种基金the General Program of National Natural Science Foundation of China(No.52274253)Natural Science Foundation Innovation Group Project of Hubei Province,China(No.2023AFA044)。
文摘Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify the phase composition and floatability of rare earths obtained after HMPT owing to the associated phase transformations.This study explored the mineralogical characteristics and separation behavior of rare earths in HMPT-treated iron tailings.Process mineralogy studies conducted via BGRIMM process mineralogy analysis and X-ray diffraction revealed that the main valuable minerals in the tailings included rare-earth oxides(9.15wt%),monazite(5.31wt%),and fluorite(23.52wt%).The study also examined the impact of mineral liberation and gangue mineral intergrowth on flotation performance.Flotation tests achieved a rare-earth oxide(REO)grade of 74.12wt% with a recovery of 34.17% in open-circuit flotation,whereas closed-circuit flotation resulted in a REO grade of 60.27wt% with a recovery of 73%.Transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy revealed that monazite remained stable during the HMPT process,while bastnaesite was transformed into Ce_(7)O_(12)and CeF_(3),leading to increased collector consumption.Nonetheless,the HMPT process did not significantly affect the flotation performance of rare earths.The enrichment of fluorite in the tailings highlighted its further recovery potential.The integration of HMPT with magnetic separation and flotation presents an efficient strategy for recovering rare earths,iron,and fluorite from Bayan Obo ores.
基金supported by the National Key R&D Program of China(Nos.2023YFC3904202,2022YFC2904500)Major Science and Technology Program of Yunnan Province,China(No.202202AB080012).
文摘The size and distribution patterns of bubbles within a laboratory-scale coarse-particle flotation column were examined using a high-speed camera-based dynamic measurement system.The effects of operational parameters such as superficial water velocity,air-flow rate,and frother dosage on bubble-size and distribution characteristics were investigated.This study aims to provide theoretical support for enabling fluidized-bed flotation within coarse-particle flotation columns.The results show that negative pressure for air inspiratory and bubble formation is generated by passing a high-speed jet through a throat,and the greatest number of bubbles are observed under natural inspiratory state at an air-liquid ratio of 1:3-1:2.5.Increasing the air-flow rate transforms the bubble diameter distribution from a peaked distribution to a more uniform distribution.Furthermore,the frother narrows the range of bubble-size distribution.A positive correlation exists between the bubble Sauter diameter and air-flow rate,with the bubble Sauter diameter bearing a negative correlation with the superficial water velocity and frother concentration.
基金Projects(52074139,51964027)supported by the National Natural Science Foundation of ChinaProject(KKS 2202152011)supported by the High-level Talents of Yunnan Province,China。
文摘Flotation behavior of stibiconite after sulfidation roasting with sulfur at a high temperature and the sulfidation mechanisms were investigated by ultraviolet spectrophotometry,X-ray diffraction(XRD)combining with thermodynamic calculation,X-ray photoelectron spectroscopy(XPS)and electron probe microanalysis(EPMA).The XRD and thermodynamic analyses revealed that the Sb_(3)O_(6)(OH)was reduced into Sb_(2)O_(4)and Sb_(2)O_(3),and was transformed into Sb_(2)S_(3)after introducing sulfur at high temperatures.Flotation test results show that flotation recovery of the stibiconite after sulfidation reaches 90.3%.Ultraviolet spectrophotometry tests confirm that adsorption capacity of sodium butyl xanthate(SBX)on surface of the roasted products has a positive relationship with S/Sb mole ratio.XPS analyses indicate that Sb-bearing species including mainly Sb_(2)S_(3),Sb_(2)O_(3)and Sb_(2)(SO_(4))_(3) are formed at the surface of particle after sulfidation.The EPMA analyses verify that the Sb_(2)S_(3)is generated at the outer layer of sample after sulfidation roasting,but the particle interior is mainly composed of antimony oxides.The sulfur atmosphere induces the outward migration of oxygen to form Sb_(2)O_(4).Then,the Sb_(2)O_(4)is transformed into Sb_(2)O_(3)in two pathways,and the Sb_(2)S_(3)is formed.These findings will provide theoretical support for recovering antimony from antimony oxide ores by xanthate flotation methods.
基金supported by the National Natural Science Foundation of China(No.52374264)the National Key Technologies Research and Development Program of China(No.2024YFC2909600)the Major Science and Technology Projects in Yunnan Province(No.202402AB080010).
文摘In recent years,the study of chalcopyrite and pyrite flotation surfaces using computational chemistry methods has made significant progress.However,current computational methods are limited by the small size of their systems and insufficient consideration of hydration and temperature effects,making it difficult to fully replicate the real flotation environment of chalcopyrite and pyrite.In this study,we employed the self-consistent charge density functional tight-binding(SCC-DFTB)parameterization method to develop a parameter set,CuFeOrg,which includes the interactions between Cu-Fe-C-H-O-N-S-P-Zn elements,to investigate the surface interactions in large-scale flotation systems of chalcopyrite and pyrite.The results of bulk modulus,atomic displacement,band structure,surface relaxation,surface Mulliken charge distribution,and adsorption tests of typical flotation reagents on mineral surfaces demonstrate that CuFeOrg achieves DFT-level accuracy while significantly outperforming DFT in computational efficiency.By constructing large-scale hydration systems of mineral surfaces,as well as large-scale systems incorporating the combined interactions of mineral surfaces,flotation reagents,and hydration,we more realistically reproduce the actual flotation environment.Furthermore,the dynamic analysis results are consistent with mineral surface contact angle experiments.Additionally,CuFeOrg lays the foundation for future studies of more complex and diverse chalcopyrite and pyrite flotation surface systems.
基金financially supported by CAMM(Center of Advanced Mining and Metallurgy/Green Flotation),as a center of excellence at the Luleå University of Technology.
文摘The global reliance on phosphate rock for agriculture and other industries,coupled with chemical regulations in developed countries,has driven the search for green alternatives in apatite flotation.This review investigates eco-friendly collectors’effectiveness in promoting sustainable mineral processing,guiding future alternatives to traditional reagents.The manuscript discussed the surface properties of apatite and its interaction with eco-friendly collectors,assessing existing fundamental studies.This study sought to:(1)define,organize,and classify“eco-friendly”collectors;(2)evaluate their effect in IEP and contact angle;(3)provide a better understanding of the adsorption behavior of the different fatty acid chains into apatite surface;(4)assess their ability to reversely and directly float apatite;(5)address gaps to achieve selectivity and process optimization.Outcomes demonstrated that fatty acids are largely applied,but other renewable sources of these reagents have been promisingly evaluated.In addition,other natural reagents have been tested,and new green synthetics have demonstrated synergistic effects when combined with fatty acids,yielding significant improvements in grade and recovery.However,collector effectiveness varies with ore characteristics,like particle size and surface properties,which remain underexplored.Future research should design tailored collectors that align with mineralogical differences to enhance selectivity.
基金funding from the European Union’s Horizon 2020 Marie Sklodowska-Curie Actions (MSCA), Innovative Training Networks (ITN), H2020-MSCA-ITN-2020 grant agreement(No.955805)。
文摘In froth flotation,overall recovery of the floatable particles consists of true recovery and recovery by entrainment,where entrainment refers to the non-selective recovery of particles in the concentrate.To understand and optimize the flotation process with regard to process conditions,it is essential to distinguish true flotation recovery from overall recovery.The established methods rely on tailored flotation experiments,unrealistic flotation conditions,or using external tracers which can be different in density and crystal structure to the mineral(s) of interest.This study presents an approach to utilize naturally occuring suitable tracers to estimate the entrainment component from overall recovery of individual particles by establishing a relationship between their settling velocity coefficient and recovery probability.Recovery probabilities of individual particles are computed using particle-based separation modelling.The approach is demonstrated for a copper ore,where naturally occurring rutile was used as the tracer to determine the entrained component of the overall recovery of chalcopyrite particles.Laboratory flotation experiments revealed that entrainment accounted for up to 6% of the overall recovery probability of fully liberated chalcopyrite particles in the fine size fractions.This approach provides a practical method for entrainment correction enabling a more accurate evaluation of true flotation recovery.
基金supported by the National Natural Science Foundation of China(No.52074357)the Vanadium Titanium Union Foundation,ChinaChina Postdoctoral Science Foundation(No.2019M650188)。
文摘n-octylphosphonic acid(OPA)was introduced as a novel collector for ilmenite flotation and its effectiveness was compared with the conventional chelating collector,benzohydroxamic acid(BHA).Micro-flotation tests demonstrated that OPA was a highly effective and selective collector for separating ilmenite from titanaugite over acidic conditions(optimal pH around 3),which was also supported by adsorption amount measurements.X-ray photoelectron spectroscopy(XPS)tests indicated that the chemisorption of OPA onto ilmenite surface was much stronger than that of BHA.Solution chemistry diagram analyses indicated that OPA could dissociate well at pH 3.0 and mostly exist in anion form.DFT calculations further confirmed that OPA was much easier to adsorb onto ilmenite surface with shorter bond length and lower adsorption energy in comparison with BHA.Therefore,OPA maintained good collecting ability and selectivity for ilmenite flotation in the strongly acidic pulp,providing valuable insights into new collector design and development.
基金support by the National Natural Science Foundation of China(Nos.52104266,52074206,52374278)Key Research and Development Project of Shaanxi Province,China(No.2023GXLH-054).
文摘The effects of combined microwave and hydrogen peroxide(H_(2)O_(2))oxidation on the flotation separation of molybdenite and chalcopyrite,as well as the underlying mechanism were investigated via microflotation,zeta potential,contact angle,X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM)and atomic force microscopy(AFM)analyses.The microflotation experiments showed that the effective inhibition of chalcopyrite can be obtained through combined oxidation pretreatments with low microwave power and H_(2)O_(2)consumption.The zeta potential,contact angle and XPS analyses indicated that the surface hydrophobicity of molybdenite changed minimally after different treatments,whereas significant amounts of hydrophilic oxidation species were formed on the surface of chalcopyrite,thus decreasing its surface hydrophobicity and floatability.Moreover,the SEM and AFM analyses indicated that more uniform oxidative products were formed on the chalcopyrite surface,further significantly increasing the surface roughness.
基金supported by the Project of the National Natural Science Foundation of China(No.52274263)the Key Research and Development Program of Jiangxi Province(No.20214BBG74001)the Major Science and Technology Innovation Project of Yichun(No.2023ZDKJGG03).
文摘Lepidolite,feldspar,and quartz are silicate minerals with similar chemical properties,complicating their flotation separation.Current collector systems require strong acidic conditions for effective separation but still face challenges related to low separation efficiency and recovery rates.This study proposed a novel collector,ammonium dodecylsulfate(ALS),to selectively extract lepidolite from feldspar and quartz using highly selective flotation methods.Microflotation experiments showed that ALS significantly outperforms other collectors in collecting lepidolite compared to feldspar and quartz.At pH 7,lepidolite recovery reached 95%,while flotation recoveries for both feldspar and quartz were below 10%.Mixed pure mineral flotation tests revealed that at pH 7 and ALS concentration of 2.5×10^(-4) mol·L^(−1),the Li_(2)O content in the concentrate was 4.21%,with a recovery rate of 95.01%.Separation efficiency and Gaudin selectivity index values were recorded.Solution chemical analyses showed that at pH 7,ALS completely ionizes into NH_(4)^(+)and CH_(3)(CH_(2))_(11)OSO_(3)^(−).Various analytical techniques,including high-speed photography imaging,contact angle measurements,Fourier transform infrared spectroscopy,zeta potential analysis,and X-ray photoelectron spectroscopy,confirmed that the anion CH_(3)(CH_(2))_(11)OSO_(3)^(−)adsorbs chemically onto aluminum sites on lepidolite's surface,while the cation NH_(4)+binds through electrostatic interactions and hydrogen bonding.The combined adsorption of these ions on lepidolite's surface enhanced its hydrophobicity.In contrast,ALS showed minimal adsorption on feldspar and quartz surfaces,which remained hydrophilic,enabling efficient selective flotation separation of lepidolite from both feldspar and quartz.
基金supported by the National Natural Science Foundation of China(No.52164022).
文摘This study investigated the effect of konjac glucomannan(KGM)on the flotation separation of calcite and scheelite.Micro-flotation tests showed that under the action of 50 mg/L KGM,the floatability of calcite notably decreased,while the impact on scheelite was negligible,resulting in a recovery difference of 82.53%.Fourier transform infrared(FTIR)spectroscopy and atomic force micro-scopy(AFM)analyses indicated the selective adsorption of KGM on the calcite surface.Test results of the zeta potential and UV-visible absorption spectroscopy revealed that KGM prevented the adsorption of sodium oleate on the calcite surface.X-ray photoelectron spec-troscopy(XPS)analysis further confirmed the chemical adsorption of KGM on the calcite surface and the formation of Ca(OH)_(2).The density functional theory(DFT)simulation results were consistent with the flotation tests,demonstrating the strong adsorption perform-ance of KGM on the calcite surface.This study offers a pathway for highly sustainable and cost-effective mineral processing by utilizing the unique properties of biopolymers such as KGM to separate valuable minerals from gangue minerals.
