Precipitation plays a pivotal role in wet deposition,significantly affecting aerosol purification.The efficacy of precipitation in removing aerosols depends on its type and the characteristics of the particulates invo...Precipitation plays a pivotal role in wet deposition,significantly affecting aerosol purification.The efficacy of precipitation in removing aerosols depends on its type and the characteristics of the particulates involved.However,further research is necessary to fully understand how precipitation impacts PM_(2.5)components.This study utilized high-temporalresolution data on PM_(2.5),its components and meteorological factors to examine varying responses influenced by precipitation intensity and duration.The findings indicate that increased rainfall intensity and duration enhance PM_(2.5)and its constituents removal efficiency.Specifically,longer precipitation periods significantly improve PM_(2.5)purification,especially with drizzle and light rain.Moreover,there is a direct correlation between preprecipitation PM_(2.5)levels and its scavenging rates,with drizzle potentially exacerbating PM_(2.5)pollution under cleaner conditions(≤35μg/m^(3)).Seasonally,the efficacy of removing PM_(2.5)components varies notably in response to drizzle and light rain.In spring,higher PM_(2.5)levels after drizzlewere primarily due to increased organic carbon concentrations favored by higher relative humidity and lower pH conditions compared to other seasons,conducive to secondary organic aerosol production.Lower wind speeds and higher temperatures further contribute to water-soluble organic carbon accumulation.Daytime and nighttime precipitation exerted differing influences on PM_(2.5)components,particularly in spring where daytime drizzle and light rain significantly increased PM_(2.5)and its constituents,notably NO_(3)-,potentially associated with phase distribution changes between gas and aerosol phases in low-temperature,high-RH conditions compared to nighttime.These results propose a dualimpact mechanism of precipitation on PM_(2.5)and provide scientific basis for designing effective control strategies.展开更多
BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory condition requiring continuous treatment and monitoring.There is limited pharmacokinetic data on vedolizumab during maintenance therapy and the effect of thio...BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory condition requiring continuous treatment and monitoring.There is limited pharmacokinetic data on vedolizumab during maintenance therapy and the effect of thiopurines on vedolizumab trough concentrations is unknown.AIM To investigate the exposure-response relationship of vedolizumab and the impact of thiopurine withdrawal in UC patients who have achieved sustained clinical and endoscopic remission during maintenance therapy.METHODS This is a post-hoc analysis of prospective randomized clinical trial(VIEWS)involving UC patients across 8 centers in Australia from 2018 to 2022.Patients in clinical and endoscopic remission were randomized to continue or withdraw thiopurine while receiving vedolizumab.We evaluated vedolizumab serum trough concentrations,presence of anti-vedolizumab antibodies,and clinical outcomes over 48 weeks to assess exposure-response asso-ciation and impact of thiopurine withdrawal.RESULTS There were 62 UC participants with mean age of 43.4 years and 42%were females.All participants received vedolizumab as maintenance therapy with 67.7%withdrew thiopurine.Vedolizumab serum trough concentrations remained stable over 48 weeks regardless of thiopurine use,with no anti-vedolizumab antibodies detected.Pa-tients with clinical remission had higher trough concentrations at week 48.In quartile analysis,a threshold of>11.3μg/mL was associated with sustained clinical remission,showing a sensitivity of 82.4%,specificity of 60.0%,and an area of receiver operating characteristic of 0.71(95%CI:0.49-0.93).Patients discontinuing thiopurine required higher vedolizumab concentrations for achieving remission.CONCLUSION A positive exposure-response relationship between vedolizumab trough concentrations and UC outcomes suggests that monitoring drug levels may be beneficial.While thiopurine did not influence vedolizumab levels,its with-drawal may necessitate higher vedolizumab trough concentrations to maintain remission.展开更多
Amphiphiles,including surfactants,have emerged as indispensable elements in materials science and pharmaceutical science,and their functions are highly relying on the critical micelle concentration(CMC)[1,2].Numerous ...Amphiphiles,including surfactants,have emerged as indispensable elements in materials science and pharmaceutical science,and their functions are highly relying on the critical micelle concentration(CMC)[1,2].Numerous fluorimetry-based probes have been developed to measure CMCs[3](Fig.S1).However,CMC measurements using these probes suffer from a time-consuming and laborious procedure and large uncertainties,primarily due to their poor photo-stabilities and highly fluctuating fluorescence backgrounds.展开更多
The COVID-19 lockdown was a typical example of extreme emission reduction,providing an opportunity to study the impact of lockdown measures on air pollution.Particle number concentrations(PNC)originate from direct emi...The COVID-19 lockdown was a typical example of extreme emission reduction,providing an opportunity to study the impact of lockdown measures on air pollution.Particle number concentrations(PNC)originate from direct emissions or through new particle formation events.However,their variations during the lockdown period are under investigation.This study focuses on Luohe,a city on the southern edge of the North China Plain,analyzing the changes in PNC and its sources before,during,and after the COVID-19 lockdown.From March 25^(th)to May 31^(st),2022,real-time PNC measurements were conducted using a Scanning Mobility Particle Sizer for particle size.Results showed an 11.2%decrease in PNC during the lockdown compared to pre-lockdown and a 3.6%decrease compared to post-lockdown,indicating reduced local emissions and weakened regional transportation during the lockdown.Positive Matrix Factorization analysis identified six sources contributing to the total PNC,including photochemical nucleation,aged photochemical nucleation,gasoline vehicle emissions,diesel vehicle emissions,coal and biomass combustion,and secondary aerosols.The significant changes in source emissions indicate a substantially reduced traffic volume after the implementation of lockdown measures(2644.8#/cm^(3),2202.2#/cm^(3),2792.7#/cm^(3)).Concurrently,photochemical nucleation(310.1#/cm^(3),306.3#/cm^(3),393.1#/cm^(3))and photochemical nucleation aging(592.8#/cm^(3),744.1#/cm^(3),810.7#/cm^(3))exhibited increasing trends,while coal/biomass combustion(1656.6#/cm^(3),1586.2#/cm^(3),980.0#/cm^(3))and secondary sources(999.4#/cm^(3),791.1#/cm^(3),804.1#/cm^(3))showed decreasing trends.In summary,the contributions of traffic emissions to PNC highlight the potential for targeted traffic management strategies to improve urban air quality.展开更多
Accurately correlating the sweating rate and the concentration of biomarkers in sweat is essential in many sweat-based diagnostic applications.These two measurements are always done simultaneously in wearable sweat se...Accurately correlating the sweating rate and the concentration of biomarkers in sweat is essential in many sweat-based diagnostic applications.These two measurements are always done simultaneously in wearable sweat sensing platforms.However,concentration measurements of biomarkers are always delayed on the timeline compared with their production,whereas there is no such delay for sweating rate.Thus,a timeline mismatch exists between these two measurements.This means that the concentration vs rate correlation constructed on the basis of such measurements will deviate from the actual correlation.This study demonstrates the existence of this mismatch and explains its cause using sweat Na^(+)measurements.It also proposes an effective approach that applies a point-by-point compensation for the delay between Na+measurements and the real-time sweating rates,such that the data on the repositioned concentration vs time curve correspond to exactly the same point on the timeline as their production.A vison sensor is developed to measure the sweating rate with high accuracy at a frequency of more than 0.1 Hz.Off-body and on-body measurements of sweating rate and Na^(+)concentration are carried out,and concentration–rate correlations are constructed using both measured and repositioned concentration curves.The least squares and random forest methods are employed to fit the constructed correlations and evaluate the reliability of the proposed approach.The use of the repositioned concentration curve gives a constructed correlation that is much closer to the actual one.This study indicates the necessity to rearrange sensor-measured biomarker concentration vs time curves when correlations of concentration with sweating rate need to be constructed and proposes a practical point-by-point data repositioning strategy for doing so.The results presented here will benefit the study of sweat biomarkers with unclear correlations with sweating rate,as well as providing a basis for the development of more reliable sweat-based diagnostic methods.展开更多
PM_(2.5)constitutes a complex and diversemixture that significantly impacts the environment,human health,and climate change.However,existing observation and numerical simulation techniques have limitations,such as a l...PM_(2.5)constitutes a complex and diversemixture that significantly impacts the environment,human health,and climate change.However,existing observation and numerical simulation techniques have limitations,such as a lack of data,high acquisition costs,andmultiple uncertainties.These limitations hinder the acquisition of comprehensive information on PM_(2.5)chemical composition and effectively implement refined air pollution protection and control strategies.In this study,we developed an optimal deep learning model to acquire hourly mass concentrations of key PM_(2.5)chemical components without complex chemical analysis.The model was trained using a randomly partitioned multivariate dataset arranged in chronological order,including atmospheric state indicators,which previous studies did not consider.Our results showed that the correlation coefficients of key chemical components were no less than 0.96,and the root mean square errors ranged from 0.20 to 2.11μg/m^(3)for the entire process(training and testing combined).The model accurately captured the temporal characteristics of key chemical components,outperforming typical machine-learning models,previous studies,and global reanalysis datasets(such asModern-Era Retrospective analysis for Research and Applications,Version 2(MERRA-2)and Copernicus Atmosphere Monitoring Service ReAnalysis(CAMSRA)).We also quantified the feature importance using the random forest model,which showed that PM_(2.5),PM_(1),visibility,and temperature were the most influential variables for key chemical components.In conclusion,this study presents a practical approach to accurately obtain chemical composition information that can contribute to filling missing data,improved air pollution monitoring and source identification.This approach has the potential to enhance air pollution control strategies and promote public health and environmental sustainability.展开更多
The accumulation of^(222)Rn and^(220)Rn progeny in poorly ventilated environments poses the risk of natural radiation exposure to the public.A previous study indicated that satisfactory results in determining the^(222...The accumulation of^(222)Rn and^(220)Rn progeny in poorly ventilated environments poses the risk of natural radiation exposure to the public.A previous study indicated that satisfactory results in determining the^(222)Rn and^(220)Rn progeny concentrations by measuring the total alpha counts at five time intervals within 560 min should be expected only in the case of high progeny concentrations in air.To complete the measurement within a relatively short period and adapt it for simultaneous measurements at comparatively lower^(222)Rn and^(220)Rn progeny concentrations,a novel mathematical model was proposed based on the radioactive decay law.This model employs a nonlinear fitting method to distinguish nuclides with overlapping spectra by utilizing the alpha particle counts of non-overlapping spectra within consecutive measurement cycles to obtain the concentrations of^(222)Rn and^(220)Rn progeny in air.Several verification experiments were conducted using an alpha spectrometer.The experimental results demonstrate that the concentrations of^(222)Rn and^(220)Rn progeny calculated by the new method align more closely with the actual circumstances than those calculated by the total count method,and their relative uncertainties are all within±16%.Furthermore,the measurement time was reduced to 90 min,representing an acceleration of 84%.The improved capability of the new method in distinguishing alpha particles with similar energies emitted from ^(218)Po and^(212)Bi,both approximately 6 MeV,contributed to realizing more accurate results.The proposed method has the potential advantage of measuring relatively low concentrations of^(222)Rn and^(220)Rn progeny in air more quickly via air filtration.展开更多
To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combusto...To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combustor.Through the integration of multiple diagnostics,simultaneous measurement of outlet temperature distribution and species concentrations was achieved.The study validates the engineering applicability of these simultaneous measurements using tungsten-rhenium(W-Re)thermocouples and Coherent Anti-Stokes Raman Scattering(CARS),CARS and Tunable Diode Laser Absorption Spectroscopy(TDLAS),as well as Gas Analysis(GA)and Mass Spectrometry(MS).The results demonstrate that measurements by thermocouples and CARS exhibit good consistency and repeatability,with a relative deviation of less than 4%,fully meeting the requirements of engineering experiments.The spatial distribution reconstruction results of TDLAS can reflect the temperature distribution characteristics at the combustor outlet.Temperature comparison between TDLAS and CARS at single-point positions shows consistent results,with a relative deviation of less than 11%and 7%under both conditions,respectively.Simultaneous measurements by integrating GA and MS show high engineering applicability for the first time,meeting the requirements for measuring both inorganic species and free radicals at the combustor outlet.Under C_(1)condition,the relative deviations of four key species(Unburned Hydrocarbon(UHC),NO,O_(2),and CO_(2))remain within 2%,while that of NO_(2)is slightly higher at approximately 8%.Under C_(2)condition,the overall deviations increase for most species,with only O_(2)and CO_(2)maintaining relatively low deviations.The primary species of UHCs at the combustor outlet under both conditions are small molecular hydrocarbons(C_(3)-C_(8))and RO_(2)radicals,accounting for over 90%of total UHC.Specifically,RO_(2)species(R is C_(1)-C_(2)alkyl groups)are the predominant species,accounting for 74.3%and 82.1%of total RO_(2)under both conditions,respectively.These integrated diagnostic methods for temperature and species concentrations at the combustor outlet serve as a crucial reference for its engineering applications.展开更多
Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly diffic...Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.展开更多
Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain...Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.展开更多
Current shipping,tourism,and resource development requirements call for more accurate predictions of the Arctic sea-ice concentration(SIC).However,due to the complex physical processes involved,predicting the spatiote...Current shipping,tourism,and resource development requirements call for more accurate predictions of the Arctic sea-ice concentration(SIC).However,due to the complex physical processes involved,predicting the spatiotemporal distribution of Arctic SIC is more challenging than predicting its total extent.In this study,spatiotemporal prediction models for monthly Arctic SIC at 1-to 3-month leads are developed based on U-Net-an effective convolutional deep-learning approach.Based on explicit Arctic sea-ice-atmosphere interactions,11 variables associated with Arctic sea-ice variations are selected as predictors,including observed Arctic SIC,atmospheric,oceanic,and heat flux variables at 1-to 3-month leads.The prediction skills for the monthly Arctic SIC of the test set(from January 2018 to December 2022)are evaluated by examining the mean absolute error(MAE)and binary accuracy(BA).Results showed that the U-Net model had lower MAE and higher BA for Arctic SIC compared to two dynamic climate prediction systems(CFSv2 and NorCPM).By analyzing the relative importance of each predictor,the prediction accuracy relies more on the SIC at the 1-month lead,but on the surface net solar radiation flux at 2-to 3-month leads.However,dynamic models show limited prediction skills for surface net solar radiation flux and other physical processes,especially in autumn.Therefore,the U-Net model can be used to capture the connections among these key physical processes associated with Arctic sea ice and thus offers a significant advantage in predicting Arctic SIC.展开更多
Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked ne...Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked networks pose a significant re-cycling challenge,particularly with the impending retirement of the first generation of wind turbine blades.In this work,we reported a fully bio-based epoxy Vitrimer(FEP)incorporat-ing a dual-dynamic covalent network design and systematically investigated the influence of the 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)catalyst on its curing kinetics,thermal/mechan-ical properties,dynamic exchange behavior,and degradation performance in a mild alkaline solution.Compared to conventional epoxy resins,FEP exhibited superior tensile strength and elongation at break at an optimal TBD concentration(2 wt%),achieving an excellent strength-toughness balance.The presence of TBD accelerated the exchange rates of both disulfide and ester bonds,endowing FEP with notable stress relaxation at elevated tempera-tures.Moreover,FEP demonstrated complete dissolution in 1 mol/L NaOH within 6 h at 25℃.These results underscored the exceptional strength,toughness,and recyclability of FEP,positioning it as a promising,environmentally friendly matrix resin for next-generation appli-cations in the new energy sector.展开更多
This study investigates the influence of hydrogen concentration at grain boundaries on the sensitivity of polycrystalline iron to hydrogen embrittlement using molecular dynamics simulations.These simulations reveal th...This study investigates the influence of hydrogen concentration at grain boundaries on the sensitivity of polycrystalline iron to hydrogen embrittlement using molecular dynamics simulations.These simulations reveal the diffusion behavior of hydrogen atoms at grain boundaries and their consequential impact on the hydrogen embrittlement sensitivity of iron alloys.The findings indicate that as the hydrogen concentration increases,both the yield strength and ultimate tensile strength of Fe-H alloys exhibit a declining trend.Moreover,the capture of hydrogen atoms at the grain boundaries significantly influences the fracture toughness of the material and promotes the formation and propagation of cracks.This study provides a novel theoretical basis for understanding and predicting the hydrogen embrittlement behavior of iron-based materials in hydrogen-rich environments,offering valuable insights for the design and development of Fe alloys with enhanced resistance to hydrogen embrittlement.展开更多
Although multicrystalline Si photovoltaics have been extensively studied and applied in the collection of solar energy,the same systems suffer significant efficiency losses in indoor settings,where ambient light condi...Although multicrystalline Si photovoltaics have been extensively studied and applied in the collection of solar energy,the same systems suffer significant efficiency losses in indoor settings,where ambient light conditions are considerably smaller in intensity and possess greater components of non-normal incidence.Yet,indoor light-driven,stand-alone devices can offer sustainable advances in next-generation technologies such as the Internet of Things.Here,we present a non-invasive solution to aid in photovoltaic indoor light collection—radially distributed waveguide-encoded lattice(RDWEL)slim films(thickness 1.5 mm).Embedded with a monotonical radial array of cylindrical waveguides(±20°),the RDWEL demonstrates seamless light collection(FoV(fields of view)=74.5°)and imparts enhancements in JSC(short circuit current density)of 44%and 14%for indoor and outdoor lighting conditions,respectively,when coupled to a photovoltaic device and compared to an unstructured but otherwise identical slim film coating.展开更多
The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit e...The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit exceptional electrochemical stability and compatibility with electrode electrolyte interfaces(EEIs),two major challenges persist:(i)safety risks caused by excessive low-flash-point diluents,and(ii)insufficient understanding of how diluents modulate solvation structures.Herein,we introduce a low-diluent-content LCILE system composed of lithium bis(fluorosulfonyl)imide(LiFSI)salt,N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide(Pyr_(13)FSI)ionic liquid,and trifluoromethanesulfonate(TFS)diluent.The TFS diluent strengthens ion-ion interactions by lowering the dielectric constant of the electrolyte,resulting in the formation of a unique nanometric anion aggregates(N-AGGs)reinforced solvation structure.These large anionic clusters exhibit accelerated redox decomposition kinetics,facilitating the rapid formation of a thin,dense,and low-impedance EEI.Consequently,the Li/LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)coin cell achieves 87.8%capacity retention over 300 cycles at 4.3 V,while a practical 1.4 Ah Li/NCM622 pouch cell retains 84.5%capacity after 80 cycles at 4.5 V.Furthermore,the electrolyte demonstrates exceptional safety,and 2 Ah Li metal pouch cells successfully pass rigorous nail penetration tests without any ignition or explosion.This work not only provides a design strategy for intrinsically safe and high-performance electrolytes but also highlights the critical role of anion cluster decomposition kinetics in shaping EEI formation.展开更多
Sweet cherries ( Prunus avium L. cv. Napoleon) were stored in controlled atmospheres (CA) of high O(2) (70% O(2) + 0% CO(2)) or high CO(2) (5% O(2) + 10% CO(2)), in modified atmosphere package (MAP, (13% - 18%) O(2) +...Sweet cherries ( Prunus avium L. cv. Napoleon) were stored in controlled atmospheres (CA) of high O(2) (70% O(2) + 0% CO(2)) or high CO(2) (5% O(2) + 10% CO(2)), in modified atmosphere package (MAP, (13% - 18%) O(2) + (2% -4%) CO(2)) and in air (control) at 1 degreesC to investigate the effects of different O(2) and CO(2) concentrations on physiological properties, quality and storability of the fruits during storage. The results indicated that compared with other treatments, CA with high O(2) concentration decreased fruit decay and ethanol content, but increased the accumulation of malondialdehyde (MDA) and stimulated browning. CA with high CO(2) concentration inhibited polyphenol oxidase (PPO) activity, reduced MDA content, maintained vitamin C content and firmness, decreased fruit decay and browning. Soluble solids contents (SSC) were not significantly affected by different atmosphere treatments. 'Napoleon' fruits stored in 5% O(2) + 10% CO(2) for as long as 80 d were of good quality, but only 40, 20 and 30 d stored in MAP, 70% O(2) + 0% CO(2) and air, re-spectively.展开更多
Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PE...Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PEG） 400, where three types of additives with different molecular chain lengths of PEG4000, PEG6000, and PEG10000 were used. For PEG10000, different concentrations, including 0, 1%, 3%, and 5%, were selected to study the influences of additive concentrations. Rheological properties of the samples were measured with a rheometer. The results show that the shear thickening effect was significantly enhanced with the increase of the concentration and the molecular chain length of additives. The mechanism of enhancement was quantitatively explained with the formation of large particles clusters.展开更多
Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions...Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions with different concentrations（0.1%,0.5%,1.0%,3.5% and 5.0% in mass fraction） was evaluated by electrochemical measurements and immersion tests.The results showed that the corrosion rate of the MAO coated AZ91D increased with increasing chloride ion concentration.The main form of corrosion failure was localized corrosion for the MAO coated AZ91D immersed in higher concentration NaCl solutions（1.0%,3.5% and 5.0%）,while it was general corrosion in dilute NaCl solutions（0.1% and 0.5%）.Two different stages of the failure process of the MAO coated AZ91D could be identified：1） occurrence of the metastable pits and 2） growth of the pits.Different equivalent circuits were also proposed based on the results of electrochemical impedance spectroscopy（EIS） for the MAO coated AZ91D immersed in different concentrations of NaCl solutions for 120 h.展开更多
The concentrations of the foliar and surface soil nutrients and the variation with species and stand age were studied inPinus spp. plantations in Zhanggutai area, northeast China. The results showed that the total N, ...The concentrations of the foliar and surface soil nutrients and the variation with species and stand age were studied inPinus spp. plantations in Zhanggutai area, northeast China. The results showed that the total N, total P and C: N ratio of the soil inP. sylvestris var.mongolica stands were significantly higher in comparison with those inP. tabulaeformis andP. densiflora stands. ForP. sylvestris var.mongolica, the foliar P concentration appeared to decrease with age, and the foliar N and K concentrations did not show a consistent change with age. As for the different tree species of the similar age, the foliar N and P concentrations were significantly different (p<0.05), being withP. sylvestris var.mongolica>P. densiflora>P. tabulaeformis. The foliar N: P ratio ofP. densiflora significantly was higher thanP. sylvestris var.mongolica andP. tabulaeformis, while the foliar K was no obvious difference between the three tree species. There were significant correlation (p<0.05) between soil total N and P, soil organic matter and total P, foliar N and P, but it did not show significant correlations between soil and foliar nutrient concentrations, which might attribute to the excessive litter raking, overgrazing and low soil moisture in this area. Based on the foliar N: P ratio, we introduced a combination threshold index of N: P ratio with their absolute foliar nutrient concentrations to determine the possible limiting nutrient. According to the critical N: P ratio and their absolute foliar N, P concentrations, theP. sylvestris var.mongolica stands showed a decreased N limitation degree with age, theP. densiflora stands showed unlimited by N and P in the whole, and theP. tabulaeformis stands showed co-limited by N and P. No significant difference in soil nutrient concentrations of the surface soils was found between 45, 29, 20-yr-oldPinus sylvestris var.mongolica plantation stands. Keywords coniferous trees - foliar nutrient concentration - limiting nutrients - N - P ratio - Zhanggutai sandy land CLC number S718.55 Document code A Article ID 1007-662X(2004)01-0011-08 Foundation item: This research was supported by Key Knowledge Innovation Project (KZCX3-SW-418) of Chinese Academy of Sciences.Biography: CHEN Guang-sheng (1978-), male, master candidate in Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016, P. R. ChinaResponsible editor: Song Funan展开更多
The bark of Pteroce/tis tatarinowii is a raw material for manufacturing XuanPaper. The effects of Ca^(2+) concentrations on the accumulation of mineral elements in the bark,leaf and root of Pteroceltis tatarinowii wer...The bark of Pteroce/tis tatarinowii is a raw material for manufacturing XuanPaper. The effects of Ca^(2+) concentrations on the accumulation of mineral elements in the bark,leaf and root of Pteroceltis tatarinowii were studied under controlled conditions. The types ofHoagland nutrient solution with three Ca^(2+) concentrations levels (200, 400 and 600 μg·g^(-1))and a control (without Ca^(2+)) were designed to culture Pteroceltis tatarinowii. After 6 months,contents of seven mineral elements including Ca, K, Mg, Mn, Zn, Cu and Na in the root, leaf and barkwere analyzed. The results indicated that Ca accumulations content in the root, leaf and bark hadpositively relation with Ca^(2+) concentrations (200, 400, 600 μg · g^(-1)), and the order of theCa content in the three components was root>leaf>bark. Ca content in the root treated with 600 μg·g^(-1) Ca^(2+) concentrations was 5.5 times as high as that of the control, and about 1.4 times ashigh as that of the root treated in 200 and 400 μg/g Ca^(2+) concentrations respectively. On thecontrary, K and Mg contents in the root, leaf and bark were negatively related to Ca^(2+)concentrations, especially in the bark, and their accumulation trend followed the order ofleaf>root>bark. K content in the bark treated with 600 μg ·g^(-1) Ca^(2+) concentrations was 39.3%of that of the control, and was 79.0% and 91.8% of that of the bark treated with 200 μg ·g^(-1)and 400 μg ·g^(-1) Ca^(2+) concentrations respectively; Mg content in the bark treated with 600μg ·g^(-1) Ca^(2+) concentrations was 23.4% of that of the control, and was 27.1% and 35.4% ofthat of the bark treated with 200 and 400 μg·g^(-1) Ca^(2+) concentrations respectively. Comparedwith the control, the general tendency of Mn, Zn and Cu content decreased with increasing of Ca^(2+)concentrations and their contents were in the order: root>leaf>bark. Based on the results of thisstudy, the experiment has been useful for providing academic bases in improving the bark quality ofPteroceltis tatarinowii on non-limestone soil.展开更多
基金supported by the National Natural Science Foundation of China(No.42175124)the Science and Technology Department of Sichuan Province(No.23YFS0383)the Fundamental Research Funds for the Central Universities,China(No.2023CDSN-18).
文摘Precipitation plays a pivotal role in wet deposition,significantly affecting aerosol purification.The efficacy of precipitation in removing aerosols depends on its type and the characteristics of the particulates involved.However,further research is necessary to fully understand how precipitation impacts PM_(2.5)components.This study utilized high-temporalresolution data on PM_(2.5),its components and meteorological factors to examine varying responses influenced by precipitation intensity and duration.The findings indicate that increased rainfall intensity and duration enhance PM_(2.5)and its constituents removal efficiency.Specifically,longer precipitation periods significantly improve PM_(2.5)purification,especially with drizzle and light rain.Moreover,there is a direct correlation between preprecipitation PM_(2.5)levels and its scavenging rates,with drizzle potentially exacerbating PM_(2.5)pollution under cleaner conditions(≤35μg/m^(3)).Seasonally,the efficacy of removing PM_(2.5)components varies notably in response to drizzle and light rain.In spring,higher PM_(2.5)levels after drizzlewere primarily due to increased organic carbon concentrations favored by higher relative humidity and lower pH conditions compared to other seasons,conducive to secondary organic aerosol production.Lower wind speeds and higher temperatures further contribute to water-soluble organic carbon accumulation.Daytime and nighttime precipitation exerted differing influences on PM_(2.5)components,particularly in spring where daytime drizzle and light rain significantly increased PM_(2.5)and its constituents,notably NO_(3)-,potentially associated with phase distribution changes between gas and aerosol phases in low-temperature,high-RH conditions compared to nighttime.These results propose a dualimpact mechanism of precipitation on PM_(2.5)and provide scientific basis for designing effective control strategies.
基金Supported by Takeda Australia,No.IISR-2016-101883.
文摘BACKGROUND Ulcerative colitis(UC)is a chronic inflammatory condition requiring continuous treatment and monitoring.There is limited pharmacokinetic data on vedolizumab during maintenance therapy and the effect of thiopurines on vedolizumab trough concentrations is unknown.AIM To investigate the exposure-response relationship of vedolizumab and the impact of thiopurine withdrawal in UC patients who have achieved sustained clinical and endoscopic remission during maintenance therapy.METHODS This is a post-hoc analysis of prospective randomized clinical trial(VIEWS)involving UC patients across 8 centers in Australia from 2018 to 2022.Patients in clinical and endoscopic remission were randomized to continue or withdraw thiopurine while receiving vedolizumab.We evaluated vedolizumab serum trough concentrations,presence of anti-vedolizumab antibodies,and clinical outcomes over 48 weeks to assess exposure-response asso-ciation and impact of thiopurine withdrawal.RESULTS There were 62 UC participants with mean age of 43.4 years and 42%were females.All participants received vedolizumab as maintenance therapy with 67.7%withdrew thiopurine.Vedolizumab serum trough concentrations remained stable over 48 weeks regardless of thiopurine use,with no anti-vedolizumab antibodies detected.Pa-tients with clinical remission had higher trough concentrations at week 48.In quartile analysis,a threshold of>11.3μg/mL was associated with sustained clinical remission,showing a sensitivity of 82.4%,specificity of 60.0%,and an area of receiver operating characteristic of 0.71(95%CI:0.49-0.93).Patients discontinuing thiopurine required higher vedolizumab concentrations for achieving remission.CONCLUSION A positive exposure-response relationship between vedolizumab trough concentrations and UC outcomes suggests that monitoring drug levels may be beneficial.While thiopurine did not influence vedolizumab levels,its with-drawal may necessitate higher vedolizumab trough concentrations to maintain remission.
基金supported by Shanghai Municipal Commission of Science and Technology,China(Grant No.:19XD1400300)the National Natural Science Foundation of China(Grant Nos.:821040821,82273867,and 82030107).
文摘Amphiphiles,including surfactants,have emerged as indispensable elements in materials science and pharmaceutical science,and their functions are highly relying on the critical micelle concentration(CMC)[1,2].Numerous fluorimetry-based probes have been developed to measure CMCs[3](Fig.S1).However,CMC measurements using these probes suffer from a time-consuming and laborious procedure and large uncertainties,primarily due to their poor photo-stabilities and highly fluctuating fluorescence backgrounds.
基金supported by the National Research Program for Key Issues in Air Pollution Control in China(No.DQGG202137)the National Natural Science Foundation of China(No.42277429)。
文摘The COVID-19 lockdown was a typical example of extreme emission reduction,providing an opportunity to study the impact of lockdown measures on air pollution.Particle number concentrations(PNC)originate from direct emissions or through new particle formation events.However,their variations during the lockdown period are under investigation.This study focuses on Luohe,a city on the southern edge of the North China Plain,analyzing the changes in PNC and its sources before,during,and after the COVID-19 lockdown.From March 25^(th)to May 31^(st),2022,real-time PNC measurements were conducted using a Scanning Mobility Particle Sizer for particle size.Results showed an 11.2%decrease in PNC during the lockdown compared to pre-lockdown and a 3.6%decrease compared to post-lockdown,indicating reduced local emissions and weakened regional transportation during the lockdown.Positive Matrix Factorization analysis identified six sources contributing to the total PNC,including photochemical nucleation,aged photochemical nucleation,gasoline vehicle emissions,diesel vehicle emissions,coal and biomass combustion,and secondary aerosols.The significant changes in source emissions indicate a substantially reduced traffic volume after the implementation of lockdown measures(2644.8#/cm^(3),2202.2#/cm^(3),2792.7#/cm^(3)).Concurrently,photochemical nucleation(310.1#/cm^(3),306.3#/cm^(3),393.1#/cm^(3))and photochemical nucleation aging(592.8#/cm^(3),744.1#/cm^(3),810.7#/cm^(3))exhibited increasing trends,while coal/biomass combustion(1656.6#/cm^(3),1586.2#/cm^(3),980.0#/cm^(3))and secondary sources(999.4#/cm^(3),791.1#/cm^(3),804.1#/cm^(3))showed decreasing trends.In summary,the contributions of traffic emissions to PNC highlight the potential for targeted traffic management strategies to improve urban air quality.
基金support from the National Natural Science Foundation of China(Grant No.61901295)the Nanchang Microsystem Institute of Tianjin University.
文摘Accurately correlating the sweating rate and the concentration of biomarkers in sweat is essential in many sweat-based diagnostic applications.These two measurements are always done simultaneously in wearable sweat sensing platforms.However,concentration measurements of biomarkers are always delayed on the timeline compared with their production,whereas there is no such delay for sweating rate.Thus,a timeline mismatch exists between these two measurements.This means that the concentration vs rate correlation constructed on the basis of such measurements will deviate from the actual correlation.This study demonstrates the existence of this mismatch and explains its cause using sweat Na^(+)measurements.It also proposes an effective approach that applies a point-by-point compensation for the delay between Na+measurements and the real-time sweating rates,such that the data on the repositioned concentration vs time curve correspond to exactly the same point on the timeline as their production.A vison sensor is developed to measure the sweating rate with high accuracy at a frequency of more than 0.1 Hz.Off-body and on-body measurements of sweating rate and Na^(+)concentration are carried out,and concentration–rate correlations are constructed using both measured and repositioned concentration curves.The least squares and random forest methods are employed to fit the constructed correlations and evaluate the reliability of the proposed approach.The use of the repositioned concentration curve gives a constructed correlation that is much closer to the actual one.This study indicates the necessity to rearrange sensor-measured biomarker concentration vs time curves when correlations of concentration with sweating rate need to be constructed and proposes a practical point-by-point data repositioning strategy for doing so.The results presented here will benefit the study of sweat biomarkers with unclear correlations with sweating rate,as well as providing a basis for the development of more reliable sweat-based diagnostic methods.
基金supported by the National Key Research and Development Program for Young Scientists of China(No.2022YFC3704000)the National Natural Science Foundation of China(No.42275122)the National Key Scientific and Technological Infrastructure project“Earth System Science Numerical Simulator Facility”(EarthLab).
文摘PM_(2.5)constitutes a complex and diversemixture that significantly impacts the environment,human health,and climate change.However,existing observation and numerical simulation techniques have limitations,such as a lack of data,high acquisition costs,andmultiple uncertainties.These limitations hinder the acquisition of comprehensive information on PM_(2.5)chemical composition and effectively implement refined air pollution protection and control strategies.In this study,we developed an optimal deep learning model to acquire hourly mass concentrations of key PM_(2.5)chemical components without complex chemical analysis.The model was trained using a randomly partitioned multivariate dataset arranged in chronological order,including atmospheric state indicators,which previous studies did not consider.Our results showed that the correlation coefficients of key chemical components were no less than 0.96,and the root mean square errors ranged from 0.20 to 2.11μg/m^(3)for the entire process(training and testing combined).The model accurately captured the temporal characteristics of key chemical components,outperforming typical machine-learning models,previous studies,and global reanalysis datasets(such asModern-Era Retrospective analysis for Research and Applications,Version 2(MERRA-2)and Copernicus Atmosphere Monitoring Service ReAnalysis(CAMSRA)).We also quantified the feature importance using the random forest model,which showed that PM_(2.5),PM_(1),visibility,and temperature were the most influential variables for key chemical components.In conclusion,this study presents a practical approach to accurately obtain chemical composition information that can contribute to filling missing data,improved air pollution monitoring and source identification.This approach has the potential to enhance air pollution control strategies and promote public health and environmental sustainability.
基金supported by the National Natural Science Foundation of China(No.12075112)Natural Science Foundation of Hunan(No.2023JJ50121),Natural Science Foundation of Hunan Province(No.2023JJ50091)Key Projects of Hunan Provincial Department of Education(No.23A0516).
文摘The accumulation of^(222)Rn and^(220)Rn progeny in poorly ventilated environments poses the risk of natural radiation exposure to the public.A previous study indicated that satisfactory results in determining the^(222)Rn and^(220)Rn progeny concentrations by measuring the total alpha counts at five time intervals within 560 min should be expected only in the case of high progeny concentrations in air.To complete the measurement within a relatively short period and adapt it for simultaneous measurements at comparatively lower^(222)Rn and^(220)Rn progeny concentrations,a novel mathematical model was proposed based on the radioactive decay law.This model employs a nonlinear fitting method to distinguish nuclides with overlapping spectra by utilizing the alpha particle counts of non-overlapping spectra within consecutive measurement cycles to obtain the concentrations of^(222)Rn and^(220)Rn progeny in air.Several verification experiments were conducted using an alpha spectrometer.The experimental results demonstrate that the concentrations of^(222)Rn and^(220)Rn progeny calculated by the new method align more closely with the actual circumstances than those calculated by the total count method,and their relative uncertainties are all within±16%.Furthermore,the measurement time was reduced to 90 min,representing an acceleration of 84%.The improved capability of the new method in distinguishing alpha particles with similar energies emitted from ^(218)Po and^(212)Bi,both approximately 6 MeV,contributed to realizing more accurate results.The proposed method has the potential advantage of measuring relatively low concentrations of^(222)Rn and^(220)Rn progeny in air more quickly via air filtration.
基金support of the National Major Science and Technology Projects of China(No.J2019-V-0005-0096)the National Key Research and Development Program of China(No.2020YFA0405700).
文摘To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combustor.Through the integration of multiple diagnostics,simultaneous measurement of outlet temperature distribution and species concentrations was achieved.The study validates the engineering applicability of these simultaneous measurements using tungsten-rhenium(W-Re)thermocouples and Coherent Anti-Stokes Raman Scattering(CARS),CARS and Tunable Diode Laser Absorption Spectroscopy(TDLAS),as well as Gas Analysis(GA)and Mass Spectrometry(MS).The results demonstrate that measurements by thermocouples and CARS exhibit good consistency and repeatability,with a relative deviation of less than 4%,fully meeting the requirements of engineering experiments.The spatial distribution reconstruction results of TDLAS can reflect the temperature distribution characteristics at the combustor outlet.Temperature comparison between TDLAS and CARS at single-point positions shows consistent results,with a relative deviation of less than 11%and 7%under both conditions,respectively.Simultaneous measurements by integrating GA and MS show high engineering applicability for the first time,meeting the requirements for measuring both inorganic species and free radicals at the combustor outlet.Under C_(1)condition,the relative deviations of four key species(Unburned Hydrocarbon(UHC),NO,O_(2),and CO_(2))remain within 2%,while that of NO_(2)is slightly higher at approximately 8%.Under C_(2)condition,the overall deviations increase for most species,with only O_(2)and CO_(2)maintaining relatively low deviations.The primary species of UHCs at the combustor outlet under both conditions are small molecular hydrocarbons(C_(3)-C_(8))and RO_(2)radicals,accounting for over 90%of total UHC.Specifically,RO_(2)species(R is C_(1)-C_(2)alkyl groups)are the predominant species,accounting for 74.3%and 82.1%of total RO_(2)under both conditions,respectively.These integrated diagnostic methods for temperature and species concentrations at the combustor outlet serve as a crucial reference for its engineering applications.
基金funded by the National Natural Science Foundation of China(Nos.52474165 and 52522404)。
文摘Cemented paste backfill(CPB)is a technology that achieves safe mining by filling the goaf with waste rocks,tailings,and other materials.It is an inevitable choice to deal with the development of deep and highly difficult mines and meet the requirements of environmental protection and safety regulations.It promotes the development of a circular economy in mines through the development of lowgrade resources and the resource utilization of waste,and extends the service life of mines.The mass concentration of solid content(abbreviated as“concentration”)is a critical parameter for CPB.However,discrepancies often arise between the on-site measurements and the pre-designed values due to factors such as groundwater inflow and segregation within the goaf,which cannot be evaluated after the solidification of CPB.This paper innovatively provides an in-situ non-destructive approach to identify the real concentration of CPB after curing for certain days using hyperspectral imaging(HSI)technology.Initially,the spectral variation patterns under different concentration conditions were investigated through hyperspectral scanning experiments on CPB samples.The results demonstrate that as the CPB concentration increases from 61wt%to 73wt%,the overall spectral reflectance gradually increases,with two distinct absorption peaks observed at 1407 and 1917 nm.Notably,the reflectance at 1407 nm exhibited a strong linear relationship with the concentration.Subsequently,the K-nearest neighbors(KNN)and support vector machine(SVM)algorithms were employed to classify and identify different concentrations.The study revealed that,with the KNN algorithm,the highest accuracy was achieved when K(number of nearest neighbors)was 1,although this resulted in overfitting.When K=3,the model displayed the optimal balance between accuracy and stability,with an accuracy of 95.03%.In the SVM algorithm,the highest accuracy of 98.24%was attained with parameters C(regularization parameter)=200 and Gamma(kernel coefficient)=10.A comparative analysis of precision,accuracy,and recall further highlighted that the SVM provided superior stability and precision for identifying CPB concentration.Thus,HSI technology offers an effective solution for the in-situ,non-destructive monitoring of CPB concentration,presenting a promising approach for optimizing and controlling CPB characteristic parameters.
基金supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020261)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of the Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412)。
文摘Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.
基金supported by the National Key Research and Development Program of China[grant number 2022YFE0106800]an Innovation Group Project of the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)[grant number 311024001]+3 种基金a project supported by the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)[grant number SML2023SP209]a Research Council of Norway funded project(MAPARC)[grant number 328943]a Nansen Center´s basic institutional funding[grant number 342624]the high-performance computing support from the School of Atmospheric Science at Sun Yat-sen University。
文摘Current shipping,tourism,and resource development requirements call for more accurate predictions of the Arctic sea-ice concentration(SIC).However,due to the complex physical processes involved,predicting the spatiotemporal distribution of Arctic SIC is more challenging than predicting its total extent.In this study,spatiotemporal prediction models for monthly Arctic SIC at 1-to 3-month leads are developed based on U-Net-an effective convolutional deep-learning approach.Based on explicit Arctic sea-ice-atmosphere interactions,11 variables associated with Arctic sea-ice variations are selected as predictors,including observed Arctic SIC,atmospheric,oceanic,and heat flux variables at 1-to 3-month leads.The prediction skills for the monthly Arctic SIC of the test set(from January 2018 to December 2022)are evaluated by examining the mean absolute error(MAE)and binary accuracy(BA).Results showed that the U-Net model had lower MAE and higher BA for Arctic SIC compared to two dynamic climate prediction systems(CFSv2 and NorCPM).By analyzing the relative importance of each predictor,the prediction accuracy relies more on the SIC at the 1-month lead,but on the surface net solar radiation flux at 2-to 3-month leads.However,dynamic models show limited prediction skills for surface net solar radiation flux and other physical processes,especially in autumn.Therefore,the U-Net model can be used to capture the connections among these key physical processes associated with Arctic sea ice and thus offers a significant advantage in predicting Arctic SIC.
基金support from the National Natural Science Foundation of China(Nos.22293011,T2341001)the Major Science and Technology Project of Anhui Province(202203a06020010).
文摘Epoxy resins are widely employed in wind turbine blades,drone rotors,and automotive interiors due to their excel-lent mechani-cal proper-ties and long service life.However,their insoluble and infusible cross-linked networks pose a significant re-cycling challenge,particularly with the impending retirement of the first generation of wind turbine blades.In this work,we reported a fully bio-based epoxy Vitrimer(FEP)incorporat-ing a dual-dynamic covalent network design and systematically investigated the influence of the 1,5,7-triazabicyclo[4.4.0]dec-5-ene(TBD)catalyst on its curing kinetics,thermal/mechan-ical properties,dynamic exchange behavior,and degradation performance in a mild alkaline solution.Compared to conventional epoxy resins,FEP exhibited superior tensile strength and elongation at break at an optimal TBD concentration(2 wt%),achieving an excellent strength-toughness balance.The presence of TBD accelerated the exchange rates of both disulfide and ester bonds,endowing FEP with notable stress relaxation at elevated tempera-tures.Moreover,FEP demonstrated complete dissolution in 1 mol/L NaOH within 6 h at 25℃.These results underscored the exceptional strength,toughness,and recyclability of FEP,positioning it as a promising,environmentally friendly matrix resin for next-generation appli-cations in the new energy sector.
基金supported by the National Science Fund for Distinguished Young Scholars(No.52425404).
文摘This study investigates the influence of hydrogen concentration at grain boundaries on the sensitivity of polycrystalline iron to hydrogen embrittlement using molecular dynamics simulations.These simulations reveal the diffusion behavior of hydrogen atoms at grain boundaries and their consequential impact on the hydrogen embrittlement sensitivity of iron alloys.The findings indicate that as the hydrogen concentration increases,both the yield strength and ultimate tensile strength of Fe-H alloys exhibit a declining trend.Moreover,the capture of hydrogen atoms at the grain boundaries significantly influences the fracture toughness of the material and promotes the formation and propagation of cracks.This study provides a novel theoretical basis for understanding and predicting the hydrogen embrittlement behavior of iron-based materials in hydrogen-rich environments,offering valuable insights for the design and development of Fe alloys with enhanced resistance to hydrogen embrittlement.
基金supported by the European Research Council(ERC)under the European Union's Horizon 2020 Research and Innovation Programme(Grant Agreement No.818762)the Engineering and Physical Sciences Research Council(Grant No.EP/V048953/1)and the Isaac Newton Trust(grant 22.39(m))。
文摘Although multicrystalline Si photovoltaics have been extensively studied and applied in the collection of solar energy,the same systems suffer significant efficiency losses in indoor settings,where ambient light conditions are considerably smaller in intensity and possess greater components of non-normal incidence.Yet,indoor light-driven,stand-alone devices can offer sustainable advances in next-generation technologies such as the Internet of Things.Here,we present a non-invasive solution to aid in photovoltaic indoor light collection—radially distributed waveguide-encoded lattice(RDWEL)slim films(thickness 1.5 mm).Embedded with a monotonical radial array of cylindrical waveguides(±20°),the RDWEL demonstrates seamless light collection(FoV(fields of view)=74.5°)and imparts enhancements in JSC(short circuit current density)of 44%and 14%for indoor and outdoor lighting conditions,respectively,when coupled to a photovoltaic device and compared to an unstructured but otherwise identical slim film coating.
基金supported by the National Key R&D Program of China(Grant No.2022YFE0207300)the National Natural Science Foundation of China(Grant Nos.22179142 and 22075314)+1 种基金Jiangsu Provincial Science and Technology Program(Grant No.BG 2024020).XPSWAXS and TOF-SIMS characterizations were supported by Nano-X(Vacuum Interconnected Nanotech Workstation,Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences(SINANO),Suzhou 215123,China)。
文摘The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit exceptional electrochemical stability and compatibility with electrode electrolyte interfaces(EEIs),two major challenges persist:(i)safety risks caused by excessive low-flash-point diluents,and(ii)insufficient understanding of how diluents modulate solvation structures.Herein,we introduce a low-diluent-content LCILE system composed of lithium bis(fluorosulfonyl)imide(LiFSI)salt,N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide(Pyr_(13)FSI)ionic liquid,and trifluoromethanesulfonate(TFS)diluent.The TFS diluent strengthens ion-ion interactions by lowering the dielectric constant of the electrolyte,resulting in the formation of a unique nanometric anion aggregates(N-AGGs)reinforced solvation structure.These large anionic clusters exhibit accelerated redox decomposition kinetics,facilitating the rapid formation of a thin,dense,and low-impedance EEI.Consequently,the Li/LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)coin cell achieves 87.8%capacity retention over 300 cycles at 4.3 V,while a practical 1.4 Ah Li/NCM622 pouch cell retains 84.5%capacity after 80 cycles at 4.5 V.Furthermore,the electrolyte demonstrates exceptional safety,and 2 Ah Li metal pouch cells successfully pass rigorous nail penetration tests without any ignition or explosion.This work not only provides a design strategy for intrinsically safe and high-performance electrolytes but also highlights the critical role of anion cluster decomposition kinetics in shaping EEI formation.
文摘Sweet cherries ( Prunus avium L. cv. Napoleon) were stored in controlled atmospheres (CA) of high O(2) (70% O(2) + 0% CO(2)) or high CO(2) (5% O(2) + 10% CO(2)), in modified atmosphere package (MAP, (13% - 18%) O(2) + (2% -4%) CO(2)) and in air (control) at 1 degreesC to investigate the effects of different O(2) and CO(2) concentrations on physiological properties, quality and storability of the fruits during storage. The results indicated that compared with other treatments, CA with high O(2) concentration decreased fruit decay and ethanol content, but increased the accumulation of malondialdehyde (MDA) and stimulated browning. CA with high CO(2) concentration inhibited polyphenol oxidase (PPO) activity, reduced MDA content, maintained vitamin C content and firmness, decreased fruit decay and browning. Soluble solids contents (SSC) were not significantly affected by different atmosphere treatments. 'Napoleon' fruits stored in 5% O(2) + 10% CO(2) for as long as 80 d were of good quality, but only 40, 20 and 30 d stored in MAP, 70% O(2) + 0% CO(2) and air, re-spectively.
文摘Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PEG） 400, where three types of additives with different molecular chain lengths of PEG4000, PEG6000, and PEG10000 were used. For PEG10000, different concentrations, including 0, 1%, 3%, and 5%, were selected to study the influences of additive concentrations. Rheological properties of the samples were measured with a rheometer. The results show that the shear thickening effect was significantly enhanced with the increase of the concentration and the molecular chain length of additives. The mechanism of enhancement was quantitatively explained with the formation of large particles clusters.
基金Project (2007CB613700) supported by the National Basic Research Program of ChinaProject supported by Research Program of Excellent Scholars Studying Abroad of Ministry of Human Resources and Social Security,China
文摘Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions with different concentrations（0.1%,0.5%,1.0%,3.5% and 5.0% in mass fraction） was evaluated by electrochemical measurements and immersion tests.The results showed that the corrosion rate of the MAO coated AZ91D increased with increasing chloride ion concentration.The main form of corrosion failure was localized corrosion for the MAO coated AZ91D immersed in higher concentration NaCl solutions（1.0%,3.5% and 5.0%）,while it was general corrosion in dilute NaCl solutions（0.1% and 0.5%）.Two different stages of the failure process of the MAO coated AZ91D could be identified：1） occurrence of the metastable pits and 2） growth of the pits.Different equivalent circuits were also proposed based on the results of electrochemical impedance spectroscopy（EIS） for the MAO coated AZ91D immersed in different concentrations of NaCl solutions for 120 h.
基金Key Knowledge Innovation Project (KZCX3-SW-418) of Chinese Academy of Sciences.
文摘The concentrations of the foliar and surface soil nutrients and the variation with species and stand age were studied inPinus spp. plantations in Zhanggutai area, northeast China. The results showed that the total N, total P and C: N ratio of the soil inP. sylvestris var.mongolica stands were significantly higher in comparison with those inP. tabulaeformis andP. densiflora stands. ForP. sylvestris var.mongolica, the foliar P concentration appeared to decrease with age, and the foliar N and K concentrations did not show a consistent change with age. As for the different tree species of the similar age, the foliar N and P concentrations were significantly different (p<0.05), being withP. sylvestris var.mongolica>P. densiflora>P. tabulaeformis. The foliar N: P ratio ofP. densiflora significantly was higher thanP. sylvestris var.mongolica andP. tabulaeformis, while the foliar K was no obvious difference between the three tree species. There were significant correlation (p<0.05) between soil total N and P, soil organic matter and total P, foliar N and P, but it did not show significant correlations between soil and foliar nutrient concentrations, which might attribute to the excessive litter raking, overgrazing and low soil moisture in this area. Based on the foliar N: P ratio, we introduced a combination threshold index of N: P ratio with their absolute foliar nutrient concentrations to determine the possible limiting nutrient. According to the critical N: P ratio and their absolute foliar N, P concentrations, theP. sylvestris var.mongolica stands showed a decreased N limitation degree with age, theP. densiflora stands showed unlimited by N and P in the whole, and theP. tabulaeformis stands showed co-limited by N and P. No significant difference in soil nutrient concentrations of the surface soils was found between 45, 29, 20-yr-oldPinus sylvestris var.mongolica plantation stands. Keywords coniferous trees - foliar nutrient concentration - limiting nutrients - N - P ratio - Zhanggutai sandy land CLC number S718.55 Document code A Article ID 1007-662X(2004)01-0011-08 Foundation item: This research was supported by Key Knowledge Innovation Project (KZCX3-SW-418) of Chinese Academy of Sciences.Biography: CHEN Guang-sheng (1978-), male, master candidate in Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016, P. R. ChinaResponsible editor: Song Funan
基金This paper is supported by National Natural Science Foundation of China (No. 39970608).
文摘The bark of Pteroce/tis tatarinowii is a raw material for manufacturing XuanPaper. The effects of Ca^(2+) concentrations on the accumulation of mineral elements in the bark,leaf and root of Pteroceltis tatarinowii were studied under controlled conditions. The types ofHoagland nutrient solution with three Ca^(2+) concentrations levels (200, 400 and 600 μg·g^(-1))and a control (without Ca^(2+)) were designed to culture Pteroceltis tatarinowii. After 6 months,contents of seven mineral elements including Ca, K, Mg, Mn, Zn, Cu and Na in the root, leaf and barkwere analyzed. The results indicated that Ca accumulations content in the root, leaf and bark hadpositively relation with Ca^(2+) concentrations (200, 400, 600 μg · g^(-1)), and the order of theCa content in the three components was root>leaf>bark. Ca content in the root treated with 600 μg·g^(-1) Ca^(2+) concentrations was 5.5 times as high as that of the control, and about 1.4 times ashigh as that of the root treated in 200 and 400 μg/g Ca^(2+) concentrations respectively. On thecontrary, K and Mg contents in the root, leaf and bark were negatively related to Ca^(2+)concentrations, especially in the bark, and their accumulation trend followed the order ofleaf>root>bark. K content in the bark treated with 600 μg ·g^(-1) Ca^(2+) concentrations was 39.3%of that of the control, and was 79.0% and 91.8% of that of the bark treated with 200 μg ·g^(-1)and 400 μg ·g^(-1) Ca^(2+) concentrations respectively; Mg content in the bark treated with 600μg ·g^(-1) Ca^(2+) concentrations was 23.4% of that of the control, and was 27.1% and 35.4% ofthat of the bark treated with 200 and 400 μg·g^(-1) Ca^(2+) concentrations respectively. Comparedwith the control, the general tendency of Mn, Zn and Cu content decreased with increasing of Ca^(2+)concentrations and their contents were in the order: root>leaf>bark. Based on the results of thisstudy, the experiment has been useful for providing academic bases in improving the bark quality ofPteroceltis tatarinowii on non-limestone soil.
