To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the in...Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.展开更多
Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert...Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.展开更多
Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxi...Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.展开更多
The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts rem...The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.展开更多
The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as ano...The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.展开更多
Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates...Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates the preparation of ZnO-containing micro-arc oxidation coatings with dual functionality by incorporating nano-ZnO into MAO electrolyte.The influence of varying ZnO concentrations on the microstructure,corrosion resistance,and antibacterial properties of the coating was examined through microstructure analysis,immersion tests,electrochemical experiments,and antibacterial assays.The findings revealed that the addition of nano-ZnO significantly enhanced the corrosion resistance of the MAO-coated alloy.Specifically,when the ZnO concentration in the electrolyte was 5 g/L,the corrosion rate was more than ten times lower compared to the MAO coatings without ZnO.Moreover,the antibacterial efficacy of ZnO+MAO coating,prepared with a ZnO concentration of 5 g/L,surpassed 95%after 24 h of co-culturing with Staphylococcus aureus(S.aureus).The nano-ZnO+MAO-coated alloy exhibited exceptional degradation resistance,corrosion resistance,and antibacterial effectiveness.展开更多
Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-infla...Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemi...TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemical and wear tests.The results show that additives can considerably accelerate the formation of MAO coatings.The coatings are mostly composed of rutile and anatase TiO_(2),α-Al_(2)O_(3),γ-Al_(2)O_(3),Al_(2)TiO_(5) and SiO_(2).Sodium silicate and SiO_(2) nanoparticles added to the coating can effectively reduce the size of micropores and increase its thickness,whereas SiO_(2) nanoparticles with superior physical properties can be directly deposited at the discharge channel,significantly increasing the coating's resistance to wear and corrosion.The coating with SiO_(2) nanoparticles exhibits the best overall performance,with the lowest corrosion rate and average friction coefficient of 4.095×10^(-5)mm/a and 0.30,respectively.展开更多
Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electro...Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.展开更多
Micro-arc oxidation(MAO)flm can only provide common mechanical protection for magnesium(Mg)–lithium(Li)alloys.These alloys are susceptible to severe localized corrosion,if the MAO flm is disrupted.This work reports t...Micro-arc oxidation(MAO)flm can only provide common mechanical protection for magnesium(Mg)–lithium(Li)alloys.These alloys are susceptible to severe localized corrosion,if the MAO flm is disrupted.This work reports the successful hydrothermal preparation of a MgLiAlCe-LDHs@GO flm on a MAO-coated Mg–Li alloy following Ce confnement.The graphene oxide(GO)sheet increased the difusion path of the corrosive media,and the addition of rare-earth cerium ions(Ce^(3+))endowed the flm with a certain self-healing ability,which signifcantly improved the corrosion resistance of the flm,and the corrosion current density(icorr)reached 3.27×10^(−8)A cm^(−2).The synergistic action of GO and Ce^(3+)can achieve long-term corrosion protection for the substrate.The corrosion resistance mechanism of MgLiAlCe-LDHs@GO flm was discussed by the scanning vibration electrode technique(SVET).展开更多
Magnesium alloy wires were processed by micro-arc oxidation （MAO） in a modified silicate-phosphate composite electrolyte containing hydroxyapatite （HA） nanopowders and NaOH. Effects of NaOH content in the composit...Magnesium alloy wires were processed by micro-arc oxidation （MAO） in a modified silicate-phosphate composite electrolyte containing hydroxyapatite （HA） nanopowders and NaOH. Effects of NaOH content in the composite electrolyte on the microstructure and properties of the MAO ceramic coatings on magnesium alloy wires were studied. It is found that the arc voltage of magnesium alloy wires in the micro-arc oxidation process is significantly reduced while the oxidation rate is accelerated. Addition of 2 g/L NaOH in the composite electrolyte is a better choice for improving corrosion resistance of magnesium alloy wires. During early simulated body fluids （SBF） immersion, the micro-arc oxidized magnesium alloy wires undergo a slow and stable degradation. After soaking for 28 d, the protective ceramic coating still shows no damage but significant degradation is observed for magnesium alloy wires after immersion for more than 60 d.展开更多
The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc o...The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc oxidation（MAO） were studied by scanning electron microscopy（SEM）,energy-dispersive X-ray spectroscopy（EDS）,X-ray diffraction（XRD）,microhardness and friction-abrasion tests,respectively.SEM results show that coatings with nanoadditive have less porosities than those without nanoadditive.XRD results reveal that nanoadditive-containing coatings contain more oxides compared with nanoadditive-free coatings in all cases,which are consistent with the EDS analysis.Mechanical properties tests show that nanoadditive Al2O3-containing coatings have higher microhardness values compared with the other coatings obtained in silicate-,borate- and aluminate-based electrolyte.On the other hand,nanoadditive has a positive effect on improving the wearing-resistance of MAO coatings in all cases.Furthermore,the borate-MAO coatings present an inferior anti-wearing property compared with the silicate- and aluminate-MAO coatings for both the nanoadditive-free and nanoadditive-containing coatings.展开更多
A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investig...A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investigated using the contact angle measuring device. The surface morphologies and structure of the coatings were evaluated using SEM, XRD and FT-IR. The corrosion resistance was investigated by potentiodynamic polarization curves and long-term immersion test. The results showed that the water contact angle (CA) increases gradually with modification time from 0 to 5 h, the highest CA reaches 138° after being modified for 5 h, and the number and size of the micro pores are decreased. The modification method hardly alters crystalline structure of the MAO coating, but improves the corrosion resistance based on the much positive potential and low current density. Moreover, the corrosion resistance and hydrophobicity can be enhanced with increasing the alkyl chain. The wetting and spreading for the alkylcarboxylate with low surface energy become easier on the micro-porous surface, and alkylcarboxylate monolayer will be formed through bidentate bonding, which changes the surface micropores to a sealing or semi-sealing structure and makes the MAO coating dense and hydrophobic. All the results demonstrate that the modification process improves the corrosion protection ability of the MAO coating on AZ31B Mg alloy.展开更多
Ceramic coatings were fabricated on aluminum doped with different concentrations of TiO2 nano-additive. alloy substrates by micro-arc oxidation （MAO） in silicate electrolytes Effects of nano-additive concentration o...Ceramic coatings were fabricated on aluminum doped with different concentrations of TiO2 nano-additive. alloy substrates by micro-arc oxidation （MAO） in silicate electrolytes Effects of nano-additive concentration on the structural and mechanical properties of the MAO coatings were analyzed. The results revealed that some nano-particle were incorporated into the resulting coating during the MAO process, while there was a reasonable concentration for the TiO2 nano-additive. With increasing the nano-additive concentration to 3.2 g/L, the adhesion value increased, while mean friction coefficient and mass loss decreased. A further increase of nano-additive deteriorated the adhesion and mean friction coefficient values, which was consistent with the micro-hardness tests.展开更多
Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions...Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions with different concentrations（0.1%,0.5%,1.0%,3.5% and 5.0% in mass fraction） was evaluated by electrochemical measurements and immersion tests.The results showed that the corrosion rate of the MAO coated AZ91D increased with increasing chloride ion concentration.The main form of corrosion failure was localized corrosion for the MAO coated AZ91D immersed in higher concentration NaCl solutions（1.0%,3.5% and 5.0%）,while it was general corrosion in dilute NaCl solutions（0.1% and 0.5%）.Two different stages of the failure process of the MAO coated AZ91D could be identified：1） occurrence of the metastable pits and 2） growth of the pits.Different equivalent circuits were also proposed based on the results of electrochemical impedance spectroscopy（EIS） for the MAO coated AZ91D immersed in different concentrations of NaCl solutions for 120 h.展开更多
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金financially supported by the National Natural Science Foundation of China(22472199)Chinese Universities Scientific Fund(15055009)and Central University Guided Funds for Building World-Class Universities(Disciplines)and Advancing Characteristic Development.The authors extend their gratitude to Theoretical and Computational Chemistry Team(from Scientific Compass www.shiyanjia.com)for providing invaluable assistance.
文摘Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.
基金support from the Australian Research Council(ARC)Linkage Project(No.LP230100166).
文摘Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.
基金supported by the National Natural Science Foundation of China(Grant number 22172112)and the Fundamental Research Funds for the Central Universities.
文摘Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.
基金financially supported by the Sichuan Science and Technology Program(Grant No.2025NSFSC0139)the China Postdoctoral Science Foundation(Grant No.2023MD734228)+5 种基金The authors extend their gratitude to Ms.Zhou Yuke(from Scientific Compass www.shiyanjia.com)for providing invaluable assistance with the XPS analysis.ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU(PRTR-C17.I1)by Generalitat de Catalunya(In-CAEM Project)The authors thank the support from the project AMaDE(PID2023-149158OB-C43)funded by MCIN/AEI/10.13039/501100011033/and by“ERDF A way of making Europe”,by the“European Union”.ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI(Grant No.:CEX2021-001214-S)is funded by the CERCA Programme/Generalitat de Catalunya.Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program.JY has received funding from the CSC-UAB PhD scholarship program.ICN2 is founding member of e-DREAM[87].
文摘The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.
基金supported by the National Natural Science Foundation of China (No.52274304)。
文摘The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.
基金supported by the National Natural Science Foundation of China(No.52001034)the China Postdoctoral Science Foundation(No.2023M731677)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX23_3032).
文摘Nano-zinc oxides(ZnO)demonstrate remarkable antibacterial properties.To further enhance the corrosion resistance and antibacterial efficiency of magnesium alloy micro-arc oxidation(MAO)coatings,this study investigates the preparation of ZnO-containing micro-arc oxidation coatings with dual functionality by incorporating nano-ZnO into MAO electrolyte.The influence of varying ZnO concentrations on the microstructure,corrosion resistance,and antibacterial properties of the coating was examined through microstructure analysis,immersion tests,electrochemical experiments,and antibacterial assays.The findings revealed that the addition of nano-ZnO significantly enhanced the corrosion resistance of the MAO-coated alloy.Specifically,when the ZnO concentration in the electrolyte was 5 g/L,the corrosion rate was more than ten times lower compared to the MAO coatings without ZnO.Moreover,the antibacterial efficacy of ZnO+MAO coating,prepared with a ZnO concentration of 5 g/L,surpassed 95%after 24 h of co-culturing with Staphylococcus aureus(S.aureus).The nano-ZnO+MAO-coated alloy exhibited exceptional degradation resistance,corrosion resistance,and antibacterial effectiveness.
基金Supported by the Guangdong Provincial Natural Science Foundation(No.2022A1515010783)the Sustainable Development Program of Shenzhen Science and Technology Major Program(No.KCXFZ20240903093925033)+4 种基金the Guangdong Provincial Special Project in Science and Technology(No.2021A05240)the Special Project in Key Fields of Guangdong Provincial Higher Education Institutions(No.2021ZDZX2064)the Basic Research Project of Shenzhen Science and Technology Innovation Commission(No.JCYJ20220530162014032)the Zhanjiang Marine Youth Talent Innovation Project(No.2022E05010)the Program for Scientific Research Start-up Funds of Guangdong Ocean University(Nos.R18008,060302042201)。
文摘Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金Sichuan Science and Technology Program(2022YFSY0018)。
文摘TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemical and wear tests.The results show that additives can considerably accelerate the formation of MAO coatings.The coatings are mostly composed of rutile and anatase TiO_(2),α-Al_(2)O_(3),γ-Al_(2)O_(3),Al_(2)TiO_(5) and SiO_(2).Sodium silicate and SiO_(2) nanoparticles added to the coating can effectively reduce the size of micropores and increase its thickness,whereas SiO_(2) nanoparticles with superior physical properties can be directly deposited at the discharge channel,significantly increasing the coating's resistance to wear and corrosion.The coating with SiO_(2) nanoparticles exhibits the best overall performance,with the lowest corrosion rate and average friction coefficient of 4.095×10^(-5)mm/a and 0.30,respectively.
基金the financial support from the National Natural Science Foundation of China(52172110,52472231,52311530113)Shanghai"Science and Technology Innovation Action Plan"intergovernmental international science and technology cooperation project(23520710600)+1 种基金Science and Technology Commission of Shanghai Municipality(22DZ1205600)the Central Guidance on Science and Technology Development Fund of Zhejiang Province(2024ZY01011)。
文摘Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.
基金supported by the National Key R&D Program of China(2021YFB3701100)the National Natural Science Foundation of China(52171101)the Fundamental Research Funds for the Central Universities(2024IAIS-QN009).
文摘Micro-arc oxidation(MAO)flm can only provide common mechanical protection for magnesium(Mg)–lithium(Li)alloys.These alloys are susceptible to severe localized corrosion,if the MAO flm is disrupted.This work reports the successful hydrothermal preparation of a MgLiAlCe-LDHs@GO flm on a MAO-coated Mg–Li alloy following Ce confnement.The graphene oxide(GO)sheet increased the difusion path of the corrosive media,and the addition of rare-earth cerium ions(Ce^(3+))endowed the flm with a certain self-healing ability,which signifcantly improved the corrosion resistance of the flm,and the corrosion current density(icorr)reached 3.27×10^(−8)A cm^(−2).The synergistic action of GO and Ce^(3+)can achieve long-term corrosion protection for the substrate.The corrosion resistance mechanism of MgLiAlCe-LDHs@GO flm was discussed by the scanning vibration electrode technique(SVET).
基金Project (BE2011778) supported by Science and Technology Support Program of Jiangsu Province,ChinaProjects (CityU 112510,112212) supported by Hong Kong Research Grants Council (RGC) General Research Funds (GRF) ,China
文摘Magnesium alloy wires were processed by micro-arc oxidation （MAO） in a modified silicate-phosphate composite electrolyte containing hydroxyapatite （HA） nanopowders and NaOH. Effects of NaOH content in the composite electrolyte on the microstructure and properties of the MAO ceramic coatings on magnesium alloy wires were studied. It is found that the arc voltage of magnesium alloy wires in the micro-arc oxidation process is significantly reduced while the oxidation rate is accelerated. Addition of 2 g/L NaOH in the composite electrolyte is a better choice for improving corrosion resistance of magnesium alloy wires. During early simulated body fluids （SBF） immersion, the micro-arc oxidized magnesium alloy wires undergo a slow and stable degradation. After soaking for 28 d, the protective ceramic coating still shows no damage but significant degradation is observed for magnesium alloy wires after immersion for more than 60 d.
基金Project(51371039)supported by the National Natural Science Foundation of China
文摘The microstructure and mechanical properties of ceramic coatings formed on 6063 aluminium alloy obtained in silicate-,borate- and aluminate-based electrolyte without and with nanoadditive Al2O3 and TiO2 by micro-arc oxidation（MAO） were studied by scanning electron microscopy（SEM）,energy-dispersive X-ray spectroscopy（EDS）,X-ray diffraction（XRD）,microhardness and friction-abrasion tests,respectively.SEM results show that coatings with nanoadditive have less porosities than those without nanoadditive.XRD results reveal that nanoadditive-containing coatings contain more oxides compared with nanoadditive-free coatings in all cases,which are consistent with the EDS analysis.Mechanical properties tests show that nanoadditive Al2O3-containing coatings have higher microhardness values compared with the other coatings obtained in silicate-,borate- and aluminate-based electrolyte.On the other hand,nanoadditive has a positive effect on improving the wearing-resistance of MAO coatings in all cases.Furthermore,the borate-MAO coatings present an inferior anti-wearing property compared with the silicate- and aluminate-MAO coatings for both the nanoadditive-free and nanoadditive-containing coatings.
基金Project(2014RC18)supported by Talent Introduction Funds of the Sichuan University of Science and Engineering,ChinaProject(2013CL01)supported by the Opening Project of the Material Corrosion and Protection Key Laboratory of Sichuan Province,ChinaProject(2013X06)supported by the Science and Technology Planning Project of Zigong City,China
文摘A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investigated using the contact angle measuring device. The surface morphologies and structure of the coatings were evaluated using SEM, XRD and FT-IR. The corrosion resistance was investigated by potentiodynamic polarization curves and long-term immersion test. The results showed that the water contact angle (CA) increases gradually with modification time from 0 to 5 h, the highest CA reaches 138° after being modified for 5 h, and the number and size of the micro pores are decreased. The modification method hardly alters crystalline structure of the MAO coating, but improves the corrosion resistance based on the much positive potential and low current density. Moreover, the corrosion resistance and hydrophobicity can be enhanced with increasing the alkyl chain. The wetting and spreading for the alkylcarboxylate with low surface energy become easier on the micro-porous surface, and alkylcarboxylate monolayer will be formed through bidentate bonding, which changes the surface micropores to a sealing or semi-sealing structure and makes the MAO coating dense and hydrophobic. All the results demonstrate that the modification process improves the corrosion protection ability of the MAO coating on AZ31B Mg alloy.
文摘Ceramic coatings were fabricated on aluminum doped with different concentrations of TiO2 nano-additive. alloy substrates by micro-arc oxidation （MAO） in silicate electrolytes Effects of nano-additive concentration on the structural and mechanical properties of the MAO coatings were analyzed. The results revealed that some nano-particle were incorporated into the resulting coating during the MAO process, while there was a reasonable concentration for the TiO2 nano-additive. With increasing the nano-additive concentration to 3.2 g/L, the adhesion value increased, while mean friction coefficient and mass loss decreased. A further increase of nano-additive deteriorated the adhesion and mean friction coefficient values, which was consistent with the micro-hardness tests.
基金Project (2007CB613700) supported by the National Basic Research Program of ChinaProject supported by Research Program of Excellent Scholars Studying Abroad of Ministry of Human Resources and Social Security,China
文摘Ceramic oxide coatings were prepared on AZ91D magnesium alloys in alkaline silicate solution using micro-arc oxidation（MAO） technique.The corrosion behavior of MAO coating on AZ91D magnesium alloys in NaCl solutions with different concentrations（0.1%,0.5%,1.0%,3.5% and 5.0% in mass fraction） was evaluated by electrochemical measurements and immersion tests.The results showed that the corrosion rate of the MAO coated AZ91D increased with increasing chloride ion concentration.The main form of corrosion failure was localized corrosion for the MAO coated AZ91D immersed in higher concentration NaCl solutions（1.0%,3.5% and 5.0%）,while it was general corrosion in dilute NaCl solutions（0.1% and 0.5%）.Two different stages of the failure process of the MAO coated AZ91D could be identified：1） occurrence of the metastable pits and 2） growth of the pits.Different equivalent circuits were also proposed based on the results of electrochemical impedance spectroscopy（EIS） for the MAO coated AZ91D immersed in different concentrations of NaCl solutions for 120 h.
