Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human...Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human participation in target recognition processes.This paper uses the particle swarm optimization(PSO)algorithm to select the optimal features in the micro-Doppler signature of sonar targets.The microDoppler effect is referred to amplitude/phase modulation on the received signal by rotating parts of a target such as propellers.Since different targets'geometric and physical properties are not the same,their micro-Doppler signature is different.This Inconsistency can be considered a practical issue(especially in the frequency domain)for sonar target recognition.Despite using 128-point fast Fourier transform(FFT)for the feature extraction step,not all extracted features contain helpful information.As a result,PSO selects the most optimum and valuable features.To evaluate the micro-Doppler signature of sonar targets and the effect of feature selection on sonar target recognition,the simplest and most popular machine learning algorithm,k-nearest neighbor(k-NN),is used,which is called k-PSO in this paper because of the use of PSO for feature selection.The parameters measured are the correct recognition rate,reliability rate,and processing time.The simulation results show that k-PSO achieved a 100%correct recognition rate and reliability rate at 19.35 s when using simulated data at a 15 dB signal-tonoise ratio(SNR)angle of 40°.Also,for the experimental dataset obtained from the cavitation tunnel,the correct recognition rate is 98.26%,and the reliability rate is 99.69%at 18.46s.Therefore,the k-PSO has an encouraging performance in automatically recognizing sonar targets when using experimental datasets and for real-world use.展开更多
Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built firs...Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.展开更多
A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domai...A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domain is decomposed into a set of components in different wavelet scales by multi-resolution wavelet analysis, and the components are associated with the vibrational motions in a target. Then micro-Doppler signatures are extracted by applying the reconstruction. During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrationM signals and estimate the motion parameters successfully. The experimental results indicate that the system can effectively detect micro-Doppler information in a moving target, and the tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analy- sis and time-frequency analysis.展开更多
This paper proposes a parity recognition of blade number and manoeuvre intention classification algorithm of rotor target based on the convolutional neural network(CNN) using micro Doppler features. Firstly, the time-...This paper proposes a parity recognition of blade number and manoeuvre intention classification algorithm of rotor target based on the convolutional neural network(CNN) using micro Doppler features. Firstly, the time-frequency spectrograms are acquired from the radar echo by the short-time Fourier transform.Secondly, based on the obtained spectrograms, a seven-layer CNN architecture is built to recognize the blade-number parity and classify the manoeuvre intention of the rotor target. The constructed architecture contains a leaky rectified linear unit and a dropout layer to accelerate the convergence of the architecture and avoid over-fitting. Finally, the spectrograms of the datasets are divided into three different ratios, i.e., 20%, 33% and 50%,and the cross validation is used to verify the effectiveness of the constructed CNN architecture. Simulation results show that, on the one hand, as the ratio of training data increases, the recognition accuracy of parity and manoeuvre intention is improved at the same signal-to-noise ratio(SNR);on the other hand, the proposed algorithm also has a strong robustness: the accuracy can still reach 90.72% with an SNR of – 6 dB.展开更多
In traditional inverse synthetic aperture radar （ISAR） imaging of moving targets with rotational parts, the micro-Doppler （m-D） effects caused by the rotational parts influence the quality of the radar images. Rec...In traditional inverse synthetic aperture radar （ISAR） imaging of moving targets with rotational parts, the micro-Doppler （m-D） effects caused by the rotational parts influence the quality of the radar images. Recently, L. Stankovic proposed an m-D removal method based on L-statistics, which has been proved effective and simple. The algorithm can extract the m-D effects according to different behaviors of signals induced by rotational parts and rigid bodies in time-frequency （T-F） domain. However, by removing m-D effects, some useful short time Fourier transform （STFT） samples of rigid bodies are also extracted, which induces the side lobe problem of rigid bodies. A parameter estimation method for rigid bodies after m-D removal is proposed, which can accurately re- cover rigid bodies and avoid the side lobe problem by only using m-D removal. Simulations are given to validate the effectiveness of the proposed method.展开更多
Micro-Doppler feature extraction of unmanned aerial vehicles(UAVs)is important for their identification and classification.Noise and the motion state of the UAV are the main factors that may affect feature extraction ...Micro-Doppler feature extraction of unmanned aerial vehicles(UAVs)is important for their identification and classification.Noise and the motion state of the UAV are the main factors that may affect feature extraction and estimation precision of the micro-motion parameters.The spectrum of UAV echoes is reconstructed to strengthen the micro-motion feature and reduce the influence of the noise on the condition of low signal to noise ratio(SNR).Then considering the rotor rate variance of UAV in the complex motion state,the cepstrum method is improved to extract the rotation rate of the UAV,and the blade length can be intensively estimated.The experiment results for the simulation data and measured data show that the reconstruction of the spectrum for the UAV echoes is helpful and the relative mean square root error of the rotating speed and blade length estimated by the proposed method can be improved.However,the computation complexity is higher and the heavier computation burden is required.展开更多
A micro-Doppler parameter estimation method based on compressed sensing theory is proposed in this paper.The micro-Doppler parameter estimation algorithm was improved for micro-motion targets with translation in this ...A micro-Doppler parameter estimation method based on compressed sensing theory is proposed in this paper.The micro-Doppler parameter estimation algorithm was improved for micro-motion targets with translation in this paper.Relatively ideal micro-Doppler parameter estimation results were obtained.The proposed micro-Doppler parameter estimation was compared with the traditional micro-Doppler parameter estimation algorithm.Requirements for return signal length were analyzed with this new algorithm and its performance was also analyzed in various environments with different SNR.展开更多
The rotating micro-motion parts produce micro-Doppler(m-D)effects which severely influence the quality of inverse synthetic aperture radar(ISAR)imaging for complex moving targets.Recently,a method based on short-time ...The rotating micro-motion parts produce micro-Doppler(m-D)effects which severely influence the quality of inverse synthetic aperture radar(ISAR)imaging for complex moving targets.Recently,a method based on short-time Fourier transform(STFT)and L-statistics to remove m-D effects is proposed,which can separate the rigid body parts from interferences introduced by rotating parts.However,during the procedure of removing m-D parts,the useful data of the rigid body parts are also removed together with the m-D interferences.After summing the rest STFT samples,the result will be affected.A novel method is proposed to recover the missing values of the rigid body parts by the particle swarm optimization(PSO)algorithm.For PSO,each particle corresponds to a possible phase estimation of the missing values.The best particle is selected which has the minimal energy of the side lobes according to the best fitness value of particles.The simulation and measured data results demonstrate the effectiveness of the proposed method.展开更多
To measure projectile attitude in space flight, based on continuous wave （CW） radar, a new micro-Doppler effect testing technique is developed in this paper. It also establishes radar testing model for attitude of f...To measure projectile attitude in space flight, based on continuous wave （CW） radar, a new micro-Doppler effect testing technique is developed in this paper. It also establishes radar testing model for attitude of flying projectile and resolve micro-Doppler effect of projectile motion attitude. By distinguishing and geting attitude parameters such as micro-motion period, this technique can in- tuitively estimate the flight stability of projectile, and the validity of this technique is proved accord- ing to flight tests.展开更多
We present a novel algorithm that can determine rotation-related parameters of a target using FMCW （frequency modulated continuous wave） radars, not utilizing inertia information of the target. More specifically, th...We present a novel algorithm that can determine rotation-related parameters of a target using FMCW （frequency modulated continuous wave） radars, not utilizing inertia information of the target. More specifically, the proposed algorithm estimates the angular velocity vector of a target as a function of time, as well as the distances of scattering points in the wing tip from the rotation axis, just by analyzing Doppler spectrograms obtained from three or more radars. The obtained parameter values will be useful to classify targets such as hostile warheads or missiles for real-time operation, or to analyze the trajectory of targets under test for the instrumentation radar operation. The proposed algorithm is based on the convex optimization to obtain the rotation-related parameters. The performance of the proposed algorithm is assessed through Monte Carlo simulations. Estimation performance of the proposed algorithm depends on the target and radar geometry and improves as the number of iterations of the convex optimization steps increases.展开更多
A heart attack disrupts the normal flow of blood to the heart muscle,potentially causing severe damage or death if not treated promptly.It can lead to long-term health complications,reduce quality of life,and signific...A heart attack disrupts the normal flow of blood to the heart muscle,potentially causing severe damage or death if not treated promptly.It can lead to long-term health complications,reduce quality of life,and significantly impact daily activities and overall well-being.Despite the growing popularity of deep learning,several drawbacks persist,such as complexity and the limitation of single-model learning.In this paper,we introduce a residual learning-based feature fusion technique to achieve high accuracy in differentiating abnormal cardiac rhythms heart sound.Combining MobileNet with DenseNet201 for feature fusion leverages MobileNet lightweight,efficient architecture with DenseNet201,dense connections,resulting in enhanced feature extraction and improved model performance with reduced computational cost.To further enhance the fusion,we employed residual learning to optimize the hierarchical features of heart abnormal sounds during training.The experimental results demonstrate that the proposed fusion method achieved an accuracy of 95.67%on the benchmark PhysioNet-2016 Spectrogram dataset.To further validate the performance,we applied it to the BreakHis dataset with a magnification level of 100X.The results indicate that the model maintains robust performance on the second dataset,achieving an accuracy of 96.55%.it highlights its consistent performance,making it a suitable for various applications.展开更多
Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods su...Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods such as ultrasonic method and pulse current method.However,due to the sensitivity of the acoustic array sensor and the influence of the equipment operation site interference,the acoustic array sensor device for partial discharge type diagnosis by phase resolved partial discharge(PRPD)map might occasionally presents incorrect results,thus affecting the power equipment operation and maintenance strategy.The acoustic array sensor detection device for power equipment developed in this paper applies the array design model of equal-area multi-arm spiral with machine learning fast fourier transform clean(FFT-CLEAN)sound source localization identification algorithm to avoid the interference factors in the noise acquisition system using a single microphone and conventional beam forming algorithm,improves the spatial resolution of the acoustic array sensor device,and proposes an acoustic array sensor device based on the acoustic spectrogram.The analysis and diagnosis method of discharge type of acoustic array sensor device can effectively reduce the system misjudgment caused by factors such as the resolution of the acoustic imaging device and the time domain pulse of the digital signal,and reduce the false alarm rate of the acoustic array sensor device.The proposed method is tested by selecting power cables as the object,and its effectiveness is proved by laboratory verification and field verification.展开更多
Recently,user recognitionmethods to authenticate personal identity has attracted significant attention especially with increased availability of various internet of things(IoT)services through fifth-generation technol...Recently,user recognitionmethods to authenticate personal identity has attracted significant attention especially with increased availability of various internet of things(IoT)services through fifth-generation technology(5G)based mobile devices.The EMG signals generated inside the body with unique individual characteristics are being studied as a part of nextgeneration user recognition methods.However,there is a limitation when applying EMG signals to user recognition systems as the same operation needs to be repeated while maintaining a constant strength of muscle over time.Hence,it is necessary to conduct research on multidimensional feature transformation that includes changes in frequency features over time.In this paper,we propose a user recognition system that applies EMG signals to the short-time fourier transform(STFT),and converts the signals into EMG spectrogram images while adjusting the time-frequency resolution to extract multidimensional features.The proposed system is composed of a data pre-processing and normalization process,spectrogram image conversion process,and final classification process.The experimental results revealed that the proposed EMG spectrogram image-based user recognition system has a 95.4%accuracy performance,which is 13%higher than the EMGsignal-based system.Such a user recognition accuracy improvement was achieved by using multidimensional features,in the time-frequency domain.展开更多
A new lighting and enlargement on phase spectrogram （PS） and frequency spectrogram （FS） is presented in this paper. These representations result from the coupling of power spectrogram and short time Fourier transf...A new lighting and enlargement on phase spectrogram （PS） and frequency spectrogram （FS） is presented in this paper. These representations result from the coupling of power spectrogram and short time Fourier transform （STFT）. The main contribution is the construction of the 3D phase spectrogram （3DPS） and the 3D frequency spectrogram （3DFS）. These new tools allow such specific test signals as small slope linear chirp, phase jump case of musical signal analysis is reported. The main objective is to and small frequency jump to be analyzed. An application detect small frequency and phase variations in order to characterize each type of sound attack without losing the amplitude information given by power spectrogram展开更多
In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)t...In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty congurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.展开更多
Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship be...Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship between human posture and the radar.To address the issue of low accuracy in behavior recognition when the human body is not directly facing the radar,a method combining local outlier factor with Doppler information is proposed for the correction of multi-classifier recognition results.Initially,the information such as distance,velocity,and micro-Doppler spectrogram of the target is obtained using the fast Fourier transform and histogram of oriented gradients-support vector machine methods,followed by preliminary recognition.Subsequently,Platt scaling is employed to transform recognition results into confidence scores,and finally,the Doppler-local outlier factor method is utilized to calibrate the confidence scores,with the highest confidence classifier result considered as the recognition outcome.Experimental results demonstrate that this approach achieves an average recognition accuracy of 96.23%for comprehensive human behavior recognition in various orientations.展开更多
文摘Currently,the use of intelligent systems for the automatic recognition of targets in the fields of defence and military has increased significantly.The primary advantage of these systems is that they do not need human participation in target recognition processes.This paper uses the particle swarm optimization(PSO)algorithm to select the optimal features in the micro-Doppler signature of sonar targets.The microDoppler effect is referred to amplitude/phase modulation on the received signal by rotating parts of a target such as propellers.Since different targets'geometric and physical properties are not the same,their micro-Doppler signature is different.This Inconsistency can be considered a practical issue(especially in the frequency domain)for sonar target recognition.Despite using 128-point fast Fourier transform(FFT)for the feature extraction step,not all extracted features contain helpful information.As a result,PSO selects the most optimum and valuable features.To evaluate the micro-Doppler signature of sonar targets and the effect of feature selection on sonar target recognition,the simplest and most popular machine learning algorithm,k-nearest neighbor(k-NN),is used,which is called k-PSO in this paper because of the use of PSO for feature selection.The parameters measured are the correct recognition rate,reliability rate,and processing time.The simulation results show that k-PSO achieved a 100%correct recognition rate and reliability rate at 19.35 s when using simulated data at a 15 dB signal-tonoise ratio(SNR)angle of 40°.Also,for the experimental dataset obtained from the cavitation tunnel,the correct recognition rate is 98.26%,and the reliability rate is 99.69%at 18.46s.Therefore,the k-PSO has an encouraging performance in automatically recognizing sonar targets when using experimental datasets and for real-world use.
文摘Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.
文摘A laser coherent detection system of 1550 nm wavelength was presented, and experimen- tal research on detecting micro-Doppler effect in a dynamic target was developed. In the study, the return signal in the time domain is decomposed into a set of components in different wavelet scales by multi-resolution wavelet analysis, and the components are associated with the vibrational motions in a target. Then micro-Doppler signatures are extracted by applying the reconstruction. During the course of the final data processing frequency analysis and time-frequency analysis are applied to analyze the vibrationM signals and estimate the motion parameters successfully. The experimental results indicate that the system can effectively detect micro-Doppler information in a moving target, and the tiny vibrational signatures also can be acquired effectively by wavelet multi-resolution analy- sis and time-frequency analysis.
基金supported by the National Natural Science Foundation of China (61901514)the Young Talent Program of Air Force Early Warning Academy (TJRC425311G11)。
文摘This paper proposes a parity recognition of blade number and manoeuvre intention classification algorithm of rotor target based on the convolutional neural network(CNN) using micro Doppler features. Firstly, the time-frequency spectrograms are acquired from the radar echo by the short-time Fourier transform.Secondly, based on the obtained spectrograms, a seven-layer CNN architecture is built to recognize the blade-number parity and classify the manoeuvre intention of the rotor target. The constructed architecture contains a leaky rectified linear unit and a dropout layer to accelerate the convergence of the architecture and avoid over-fitting. Finally, the spectrograms of the datasets are divided into three different ratios, i.e., 20%, 33% and 50%,and the cross validation is used to verify the effectiveness of the constructed CNN architecture. Simulation results show that, on the one hand, as the ratio of training data increases, the recognition accuracy of parity and manoeuvre intention is improved at the same signal-to-noise ratio(SNR);on the other hand, the proposed algorithm also has a strong robustness: the accuracy can still reach 90.72% with an SNR of – 6 dB.
基金supported by the National Natural Science Foundation of China(61471149)the Program for New Century Excellent Talents in University(NCET-12-0149)+2 种基金the National Science Foundation for Postdoctoral Scientists of China(2013M540292)the postdoctoral scienceresearch developmental foundation of Heilongjiang province(LBHQ11092)the Heilongjiang Postdoctoral Specialized Research Fund
文摘In traditional inverse synthetic aperture radar （ISAR） imaging of moving targets with rotational parts, the micro-Doppler （m-D） effects caused by the rotational parts influence the quality of the radar images. Recently, L. Stankovic proposed an m-D removal method based on L-statistics, which has been proved effective and simple. The algorithm can extract the m-D effects according to different behaviors of signals induced by rotational parts and rigid bodies in time-frequency （T-F） domain. However, by removing m-D effects, some useful short time Fourier transform （STFT） samples of rigid bodies are also extracted, which induces the side lobe problem of rigid bodies. A parameter estimation method for rigid bodies after m-D removal is proposed, which can accurately re- cover rigid bodies and avoid the side lobe problem by only using m-D removal. Simulations are given to validate the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China(62141108)Natural Science Foundation of Tianjin(19JCQNJC01000)。
文摘Micro-Doppler feature extraction of unmanned aerial vehicles(UAVs)is important for their identification and classification.Noise and the motion state of the UAV are the main factors that may affect feature extraction and estimation precision of the micro-motion parameters.The spectrum of UAV echoes is reconstructed to strengthen the micro-motion feature and reduce the influence of the noise on the condition of low signal to noise ratio(SNR).Then considering the rotor rate variance of UAV in the complex motion state,the cepstrum method is improved to extract the rotation rate of the UAV,and the blade length can be intensively estimated.The experiment results for the simulation data and measured data show that the reconstruction of the spectrum for the UAV echoes is helpful and the relative mean square root error of the rotating speed and blade length estimated by the proposed method can be improved.However,the computation complexity is higher and the heavier computation burden is required.
基金Supported by the National Natural Science Foundation of China(61571043)111 Project of China(B14010)
文摘A micro-Doppler parameter estimation method based on compressed sensing theory is proposed in this paper.The micro-Doppler parameter estimation algorithm was improved for micro-motion targets with translation in this paper.Relatively ideal micro-Doppler parameter estimation results were obtained.The proposed micro-Doppler parameter estimation was compared with the traditional micro-Doppler parameter estimation algorithm.Requirements for return signal length were analyzed with this new algorithm and its performance was also analyzed in various environments with different SNR.
基金the National Natural Science Foundation of China(61622107,61871146).
文摘The rotating micro-motion parts produce micro-Doppler(m-D)effects which severely influence the quality of inverse synthetic aperture radar(ISAR)imaging for complex moving targets.Recently,a method based on short-time Fourier transform(STFT)and L-statistics to remove m-D effects is proposed,which can separate the rigid body parts from interferences introduced by rotating parts.However,during the procedure of removing m-D parts,the useful data of the rigid body parts are also removed together with the m-D interferences.After summing the rest STFT samples,the result will be affected.A novel method is proposed to recover the missing values of the rigid body parts by the particle swarm optimization(PSO)algorithm.For PSO,each particle corresponds to a possible phase estimation of the missing values.The best particle is selected which has the minimal energy of the side lobes according to the best fitness value of particles.The simulation and measured data results demonstrate the effectiveness of the proposed method.
基金Supported by the National Natural Science Fundation of China(61174219)
文摘To measure projectile attitude in space flight, based on continuous wave （CW） radar, a new micro-Doppler effect testing technique is developed in this paper. It also establishes radar testing model for attitude of flying projectile and resolve micro-Doppler effect of projectile motion attitude. By distinguishing and geting attitude parameters such as micro-motion period, this technique can in- tuitively estimate the flight stability of projectile, and the validity of this technique is proved accord- ing to flight tests.
文摘We present a novel algorithm that can determine rotation-related parameters of a target using FMCW （frequency modulated continuous wave） radars, not utilizing inertia information of the target. More specifically, the proposed algorithm estimates the angular velocity vector of a target as a function of time, as well as the distances of scattering points in the wing tip from the rotation axis, just by analyzing Doppler spectrograms obtained from three or more radars. The obtained parameter values will be useful to classify targets such as hostile warheads or missiles for real-time operation, or to analyze the trajectory of targets under test for the instrumentation radar operation. The proposed algorithm is based on the convex optimization to obtain the rotation-related parameters. The performance of the proposed algorithm is assessed through Monte Carlo simulations. Estimation performance of the proposed algorithm depends on the target and radar geometry and improves as the number of iterations of the convex optimization steps increases.
文摘A heart attack disrupts the normal flow of blood to the heart muscle,potentially causing severe damage or death if not treated promptly.It can lead to long-term health complications,reduce quality of life,and significantly impact daily activities and overall well-being.Despite the growing popularity of deep learning,several drawbacks persist,such as complexity and the limitation of single-model learning.In this paper,we introduce a residual learning-based feature fusion technique to achieve high accuracy in differentiating abnormal cardiac rhythms heart sound.Combining MobileNet with DenseNet201 for feature fusion leverages MobileNet lightweight,efficient architecture with DenseNet201,dense connections,resulting in enhanced feature extraction and improved model performance with reduced computational cost.To further enhance the fusion,we employed residual learning to optimize the hierarchical features of heart abnormal sounds during training.The experimental results demonstrate that the proposed fusion method achieved an accuracy of 95.67%on the benchmark PhysioNet-2016 Spectrogram dataset.To further validate the performance,we applied it to the BreakHis dataset with a magnification level of 100X.The results indicate that the model maintains robust performance on the second dataset,achieving an accuracy of 96.55%.it highlights its consistent performance,making it a suitable for various applications.
基金This work was supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52090020007F)National Key R&D Program of China(2017YFB0902800).
文摘Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods such as ultrasonic method and pulse current method.However,due to the sensitivity of the acoustic array sensor and the influence of the equipment operation site interference,the acoustic array sensor device for partial discharge type diagnosis by phase resolved partial discharge(PRPD)map might occasionally presents incorrect results,thus affecting the power equipment operation and maintenance strategy.The acoustic array sensor detection device for power equipment developed in this paper applies the array design model of equal-area multi-arm spiral with machine learning fast fourier transform clean(FFT-CLEAN)sound source localization identification algorithm to avoid the interference factors in the noise acquisition system using a single microphone and conventional beam forming algorithm,improves the spatial resolution of the acoustic array sensor device,and proposes an acoustic array sensor device based on the acoustic spectrogram.The analysis and diagnosis method of discharge type of acoustic array sensor device can effectively reduce the system misjudgment caused by factors such as the resolution of the acoustic imaging device and the time domain pulse of the digital signal,and reduce the false alarm rate of the acoustic array sensor device.The proposed method is tested by selecting power cables as the object,and its effectiveness is proved by laboratory verification and field verification.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2017R1A6A1A03015496)the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2021R1A2C1014033).
文摘Recently,user recognitionmethods to authenticate personal identity has attracted significant attention especially with increased availability of various internet of things(IoT)services through fifth-generation technology(5G)based mobile devices.The EMG signals generated inside the body with unique individual characteristics are being studied as a part of nextgeneration user recognition methods.However,there is a limitation when applying EMG signals to user recognition systems as the same operation needs to be repeated while maintaining a constant strength of muscle over time.Hence,it is necessary to conduct research on multidimensional feature transformation that includes changes in frequency features over time.In this paper,we propose a user recognition system that applies EMG signals to the short-time fourier transform(STFT),and converts the signals into EMG spectrogram images while adjusting the time-frequency resolution to extract multidimensional features.The proposed system is composed of a data pre-processing and normalization process,spectrogram image conversion process,and final classification process.The experimental results revealed that the proposed EMG spectrogram image-based user recognition system has a 95.4%accuracy performance,which is 13%higher than the EMGsignal-based system.Such a user recognition accuracy improvement was achieved by using multidimensional features,in the time-frequency domain.
文摘A new lighting and enlargement on phase spectrogram （PS） and frequency spectrogram （FS） is presented in this paper. These representations result from the coupling of power spectrogram and short time Fourier transform （STFT）. The main contribution is the construction of the 3D phase spectrogram （3DPS） and the 3D frequency spectrogram （3DFS）. These new tools allow such specific test signals as small slope linear chirp, phase jump case of musical signal analysis is reported. The main objective is to and small frequency jump to be analyzed. An application detect small frequency and phase variations in order to characterize each type of sound attack without losing the amplitude information given by power spectrogram
文摘In-process damage to a cutting tool degrades the surfacenish of the job shaped by machining and causes a signicantnancial loss.This stimulates the need for Tool Condition Monitoring(TCM)to assist detection of failure before it extends to the worse phase.Machine Learning(ML)based TCM has been extensively explored in the last decade.However,most of the research is now directed toward Deep Learning(DL).The“Deep”formulation,hierarchical compositionality,distributed representation and end-to-end learning of Neural Nets need to be explored to create a generalized TCM framework to perform eciently in a high-noise environment of cross-domain machining.With this motivation,the design of dierent CNN(Convolutional Neural Network)architectures such as AlexNet,ResNet-50,LeNet-5,and VGG-16 is presented in this paper.Real-time spindle vibrations corresponding to healthy and various faulty congurations of milling cutter were acquired.This data was transformed into the time-frequency domain and further processed by proposed architectures in graphical form,i.e.,spectrogram.The model is trained,tested,and validated considering dierent datasets and showcased promising results.
基金the National Key Research and Development Program of China(No.2022YFC3601400)。
文摘Frequency-modulated continuous-wave radar enables the non-contact and privacy-preserving recognition of human behavior.However,the accuracy of behavior recognition is directly influenced by the spatial relationship between human posture and the radar.To address the issue of low accuracy in behavior recognition when the human body is not directly facing the radar,a method combining local outlier factor with Doppler information is proposed for the correction of multi-classifier recognition results.Initially,the information such as distance,velocity,and micro-Doppler spectrogram of the target is obtained using the fast Fourier transform and histogram of oriented gradients-support vector machine methods,followed by preliminary recognition.Subsequently,Platt scaling is employed to transform recognition results into confidence scores,and finally,the Doppler-local outlier factor method is utilized to calibrate the confidence scores,with the highest confidence classifier result considered as the recognition outcome.Experimental results demonstrate that this approach achieves an average recognition accuracy of 96.23%for comprehensive human behavior recognition in various orientations.
