A composite coating containing hexagonal boron nitride（hBN） particles and titanium oxide（TiO_2） was formed on the surface of Ti-6Al-4V alloy via micro-arc oxidation（MAO）. The effect of quantity of the hBN-partic...A composite coating containing hexagonal boron nitride（hBN） particles and titanium oxide（TiO_2） was formed on the surface of Ti-6Al-4V alloy via micro-arc oxidation（MAO）. The effect of quantity of the hBN-particles added into electrolyte on microstructure, composition, and wear behavior of the resulting composite coatings was investigated. Microstructure, phase composition, and tribological behavior of the resulting MAO coatings were evaluated via scanning electron microscopy, X-ray diffraction, and ball-on-disc abrasive tests. The results reveal that the TiO_2/hBN composite coating consisting of rutile TiO_2, anatase TiO_2, and an hBN phase was less porous than particle-free coating. Furthermore, the presence of hBN particles in the MAO coating produced an improved anti-friction property. The composite coating produced in the electrolyte containing 2 g/L of hBN particles exhibited the best wear resistance.The outer loose layer of the MAO coatings was removed by a mechanical polishing process, which led to a significant improvement in the wear resistance and anti-friction properties of the MAO coatings and highlighted an essential lubricating role of hBN particles in the composite coatings. However, wear mechanism of the MAO coatings was not relevant to the presence of hBN particles, where fatigue wear dominated the anti-fraction properties of the MAO coatings with and without hBN particles.展开更多
Magnesium and its alloys have been used in many industries, but they are reactive and require protection against aggressive environments. In this study, oxide coatings were applied on AZ91D magnesium alloy using micro...Magnesium and its alloys have been used in many industries, but they are reactive and require protection against aggressive environments. In this study, oxide coatings were applied on AZ91D magnesium alloy using micro-arc oxidation （MAO） process. Then, in order to seal the pores of the MAO coatings, the samples were immersed in cerium bath for different times. The surface morphologies and compositions of the coatings were analyzed by scanning electron microscopy （SEM） and X-ray energy dispersive spectroscopy （EDS）, respectively. The corrosion behavior of the coatings was investigated with electrochemical impedance spectroscopy （EIS） and potentiodynamic polarization tests in 3.5 wt.% NaCl solution. The amount of the porosity of the coating was measured by electrochemical method. It was found that the sealing treatments by immersion in cerium bath successfully sealed the pores of the MAO coatings. The results of the corrosion tests showed that the MAO coating which was sealed in Ce bath for 10 min enhanced the corrosion resistance of the substrate significantly. Furthermore, this coating had the lowest amount of the porosity among the coatings.展开更多
Ceramic coatings were prepared on AZ91 D Mg alloy by micro-arc oxidation （MAO） in aluminate electrolytes, with Al2O3 nano-additive suspending at different concentrations. Effects of nano-additive concentration on th...Ceramic coatings were prepared on AZ91 D Mg alloy by micro-arc oxidation （MAO） in aluminate electrolytes, with Al2O3 nano-additive suspending at different concentrations. Effects of nano-additive concentration on the structure, phase composition, hardness and anti-corrosion property of the MAO coatings were analyzed by scanning electron microscopy, X-ray diffraction, micro-hardness test and electrochemical method, respectively. The results revealed that Al2O3 nano-particles were mostly incorporated into ceramic coating chemically, transferred into MgAl2O4, rather than being trapped mechanically during MAO process. With the increase of Al2O3 concentration, the voltage-time response, content of MgAl2O4, hardness and anti-corrosion property increased. However, when the concentration varied from 10 g/L to 15 g/L, these behaviors and properties changed only a little. This result indicated that, after the concentration of Al2O3 nano-additive reaching 10 g/L, the incorporation of Al2O3 nano-particles turned into a saturation state, due to the complex process during MAO treatment. Therefore, 10 g/L might be a proper concentration for MAO coating to incorporate Al2O3 nano-particles,展开更多
To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding...To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding SiC nano-particles into electrolyte during MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM） and X-ray diffraction （XRD）,respectively.Furthermore,the corrosion performance of the coatings was evaluated via a three-electrode system in a 3.5 wt pct NaCl solution.From the obtained morphology of alumina coatings,it was believed that the Al2O3 coatings embedded with SiC nano-particles were formed.The electrochemical impedance spectroscopy （EIS） plots and potentiodynamic polarization plots of the Al2O3 coatings with and without SiC nano-particles at different current densities reveal that the Al2O3 coatings with SiC nano-particles formed at 10 A/dm 2 showed the better corrosion resistance than the other coatings produced at 5 and 7 A/dm 2.展开更多
Micro-arc oxidized Cu-incorporated TiO2 coatings （Cu-TiO2） were prepared in the Ca, P, Cu-containing electrolyte to obtain an implant material with superior biological activity and antibacterial property. The surfac...Micro-arc oxidized Cu-incorporated TiO2 coatings （Cu-TiO2） were prepared in the Ca, P, Cu-containing electrolyte to obtain an implant material with superior biological activity and antibacterial property. The surface topography, phase, and element composition of the TiO2 and Cu-TiO2 coatings were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, and energy-dispersive X-ray spectrometry （EDS）, respectively. Staphylococcus aureus （S. aureus） was selected to evaluate the antibacterial property of the Cu-TiO2 coatings, whereas osteoblastic MG63 cells were cultured on the coatings to investigate the biological activity. The obtained results demonstrated that Cu element was successfully incorporated into the porous nano-structured TiO2 coatings, which did not alter apparently the surface topography and phase composition of the coatings as compared to the Cu-free TiO2 coatings. Moreover, the antibacterial studies suggested that the Cu-incorporated TiO2 coatings could significantly inhibit the adhesion of S. aureus. In addition, the in vitro biological evaluation displayed that the adhesion, proliferation and differentiation of MG63 cells on the Cu-incorporated coatings were enhanced as compared to those on the Cu-free coatings and Ti plates. In conclusion, the innovative Cu-incorporated nano-structured TiO2 coatings on Ti substrate with excellent antibacterial property and biological activity are promising candidates for orthopedic implant.展开更多
To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 H...To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 Hz,700 Hz,and 900 Hz） were produced during the MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM）,field emission scanning electron microscopy （FESEM）,and X-ray diffraction （XRD）.The surface roughness of the coatings was characterized by confocal laser scanning microscopy （CLSM）.Simultaneously,the tribological properties of the composite coatings were evaluated by using a universal materials tester （UMT）.The results shows that the wear resistance of the ceramic coatings with SiC nano-particles was improved significantly compared to the ceramic coatings without SiC nano-particles.Furthermore,the composite coating formed at current frequency 900 Hz showed the better wear resistance than the others.展开更多
Micro-arc oxidation (MAO) method was used for the surface modification of an Mg-5wt.%Li alloy. Ceramic coatings were in-situ fabricated on the Mg-Li alloy. The morphology feature,phase composition,and corrosion-resist...Micro-arc oxidation (MAO) method was used for the surface modification of an Mg-5wt.%Li alloy. Ceramic coatings were in-situ fabricated on the Mg-Li alloy. The morphology feature,phase composition,and corrosion-resistance of the formed ceramic coatings were studied by SEM,XRD,and electrochemical methods,respectively. The results showed that the coatings produced in a sodium silicate solution system were composed of MgO and Mg2SiO4. The ceramic coating became thicker and the content of Mg2SiO4 phase increase...展开更多
Compound ceramic coatings with the main crystalline of Al_2TiO_5（in the as-prepared coating without treatment） were prepared in situ on the surface Ti-6Al-4V alloy by means of pulsed bipolar micro-arc oxidation in N...Compound ceramic coatings with the main crystalline of Al_2TiO_5（in the as-prepared coating without treatment） were prepared in situ on the surface Ti-6Al-4V alloy by means of pulsed bipolar micro-arc oxidation in Na AlO_2 solution. For the purpose of studying the antioxidation properties of the samples, the coated samples treated in argon and the as-coated samples were calcined in air at 1000 °C. And the related characteristics were investigated by X-ray diffraction（XRD）, scanning electron microscopy（SEM） and X-ray fluorescence（XRF） spectroscopy, respectively. The results show that, when it was calcined in air for 1 h, Al_2TiO_5in the as-prepared coating decomposed and transformed into α-Al_2O_3 and rutile TiO_2.However, after almost 4 h in argon, Al_2TiO_5in the asprepared coating decomposed and the final coating surface contents are completely α-Al_2O_3, and those of the middle interface are mainly Al_2O_3 and Ti_2O_3. The morphologies of the coatings after calcination in argon and air are different.High-temperature oxidation occurred violently in the alloy substrate without coatings. Furthermore, the weight gain curves of the as-prepared samples and the coated samples treated in argon both show a parabolic shape.展开更多
Micro-arc oxidation(MAO)coatings were fabricated on AZ31 magnesium alloy and the effect of Na2CO3 on the energy consumption was studied.The results show that the concentration of Na2CO3 has a critical effect on the di...Micro-arc oxidation(MAO)coatings were fabricated on AZ31 magnesium alloy and the effect of Na2CO3 on the energy consumption was studied.The results show that the concentration of Na2CO3 has a critical effect on the discharge behavior of MAO process.With increasing the Na2CO3 concentration in the electrolyte,the arcing voltage and working voltage decrease.A proper concentration is needed to achieve the highest growth rate of the coatings and the lowest energy consumption per unit coating volume.The addition of Na2CO3 decreases the arcing and working voltage of MAO discharge.It is attributed to that the Na2CO3 leads to much more micropores due to the decomposition of MgCO3 to produce more gas.展开更多
In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content...In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.展开更多
Micro-arc oxidation （MAO） process was cartied out in an optimized dual electrolyte system to fabricate a compact, smooth, and corrosion resistant coating on ZK60 Mg alloy. The microstructural characteristics of coat...Micro-arc oxidation （MAO） process was cartied out in an optimized dual electrolyte system to fabricate a compact, smooth, and corrosion resistant coating on ZK60 Mg alloy. The microstructural characteristics of coating were investigated by scanning electron microscopy （SEM） coupled with an energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）. Test of mass loss was conducted at a 3.5 % NaCl solution to assess the resistance to corrosion. The bonding strength between the coating and ZK60 substrate was evaluated using scratch experiment. The results reveal that MgA1204 and MgO are the main phases of ceramic coating obtained in the dual electrolyte system. The corrosion rate of coating prepared in the optimized dual electrolyte is only 0.0061 g.m-2.h-1, which demonstrates excellent corrosion resistance. This is mainly due to the compact, uniform coating with high bonding strength.展开更多
Micro-arc oxidation(MAO)coating was prepared on Ti6Al4V alloy surface and its characterizations were detected by Vickers hardness tester,profilometer,scanning electric microscope(SEM),energy dispersive X-ray spectrome...Micro-arc oxidation(MAO)coating was prepared on Ti6Al4V alloy surface and its characterizations were detected by Vickers hardness tester,profilometer,scanning electric microscope(SEM),energy dispersive X-ray spectrometer(EDX)and X-ray diffractometer(XRD).Fretting wear behaviors of the coating and its substrate were comparatively tested without lubrication under varied displacement amplitudes(D)in a range of 3-40μm,constant normal load(Fn)of 300 N and frequency of 5 Hz.The results showed that the MAO coating,presenting rough and porous surface and high hardness,mainly consisted of rutile and anatase TiO2 phases.Compared with the substrate,the MAO coating could shift the mixed fretting regime(MFR)and slip regime(SR)to a direction of smaller displacement amplitude.In the partial slip regime(PSR),lower friction coefficients and slight damage appeared due to the coordination of elastic deformation of contact zones.In the MFR,the friction coefficient of the coating was lower than that of the substrate as a result of the prevention of plastic deformation by the hard ceramic surface.With the increase of the displacement amplitude,the degradation of the MAO coating and the substrate increased extremely.The fretting wear mechanisms of the coating were abrasive wear and delamination with some material transfer of specimen.In addition,the coating presented a better property for alleviating fretting wear.展开更多
In the present study, titania coatings were prepared under different current density conditions in micro-arc oxidation （MAO） process on titanium alloy in NaAlO2 solution. The aim of this work was to study the effect...In the present study, titania coatings were prepared under different current density conditions in micro-arc oxidation （MAO） process on titanium alloy in NaAlO2 solution. The aim of this work was to study the effects of current density on the microstructure of titania coatings. The morphology and phase composition of the coatings were investigated by field emission scanning electron microscopy （FESEM）, X-ray diffraction （XRD） and Raman spectra. The thickness and surface roughness of the coatings were characterized by confocal laser Scanning Microscopy （CLSM）. The results showed that the coatings were composed of crystalline anatase and rutile phases of TiO2, and contain a network of evenly distributed small pores. It has also shown that an increase in current density leads to an increase in rutile content.展开更多
In the NaAlO2-Na2SiO3 compound system, the ceramic coatings were prepared on magnesium alloy by micro-arc oxidation. The morphology, phase composition, and thermal shock resistance of the ceramic coatings were studied...In the NaAlO2-Na2SiO3 compound system, the ceramic coatings were prepared on magnesium alloy by micro-arc oxidation. The morphology, phase composition, and thermal shock resistance of the ceramic coatings were studied by scanning electron microscope, X-ray diffraction and thermal shock tests, respectively. The results showed that the ceramic coating contains MgO, MgAl2O4, as well as a little amount of MgESiO4. The thickness of the ceramic coatings increases with the current density increasing, when the current density is 12 A·dm^-2, the thermal shock resistance of the produced ceramic coating is the best. The hardness of the ceramic coating is up to 10 GPa or so.展开更多
The regulation of ceramic coating formed by micro-arc oxidation on Mg-11Gd-1Y-0.5Zn (wt.%) magnesium alloys was investigated by scanning electron microscopy (SEM) and X-ray diffractometer (XRD). The relation of phase ...The regulation of ceramic coating formed by micro-arc oxidation on Mg-11Gd-1Y-0.5Zn (wt.%) magnesium alloys was investigated by scanning electron microscopy (SEM) and X-ray diffractometer (XRD). The relation of phase structure and corrosion resistance of MgO coating formed by micro-arc oxidation in different growth stages was analyzed. The results showed that the growth of coating accorded with linear regularity in the initial stage of micro-arc oxidation, which was the stage of anodic oxidation controlled ...展开更多
A ceramic layer was prepared on the surface of Al2O3f/ZL109 composites by means of micro-arc oxidation （MAO） technique. The surface morphology and phase constituent of the ceramic layer were analyzed using scanning ...A ceramic layer was prepared on the surface of Al2O3f/ZL109 composites by means of micro-arc oxidation （MAO） technique. The surface morphology and phase constituent of the ceramic layer were analyzed using scanning electron microscope and X-ray diffraction. The polarization curves of the composites before and after MAO treatment were measured and analyzed. The results showed that after Al2O3f/ZL109 composites were treated using MAO technique in silicate solution, the ceramic layer formed, and it was composed of Al, Si, and mullite phase. Al and Si came from Al alloy matrix of the composites, and the mullite phase formed in process of MAO. Al2O3 fiber in the composites affects the electric conductivity of the composites, the MAO reaction is promoted, and the cera- mic layer forming on the composite material side is slightly thicker than that on the Al alloy side. After Al2O3f/ZL109 composites were treated using MAO technique, the corro- sion resistance of the composites is significantly improved.展开更多
An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corros...An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corrosion resistance of the coatings were discussed. Morphology and phase constituents of the MAO coatings produced in electrolyte with different Na2SiO3 concentrations were analyzed by scanning electron microscopy, confocal laser scanning microscopy and X-ray diffraction. Electrochemical tests were conducted to evaluate the corrosion resistance of the coatings. The results show that the corrosion resistance of the coated joints is much better than that without the ceramic coating, and the ceramic coating produced in the electrolyte with Na2SiO3 concentration 20 g/L showed better corrosion resistance than the others.展开更多
Micro-arc oxidation （MAO） is an enhanced chemical technology in an electrolyte medium to obtain coating structures on valve-metal surfaces. Titanium oxide films obtained by MAO in the sodium phosphate electrolyte we...Micro-arc oxidation （MAO） is an enhanced chemical technology in an electrolyte medium to obtain coating structures on valve-metal surfaces. Titanium oxide films obtained by MAO in the sodium phosphate electrolyte were investigated. The films were composed mainly of TiO2 phases in the form of anatase and mille and enriched with Na and P elements at the surface. Their apafite-inducing ability was evaluated in a simulated body fluid （SBF）. When immersing in SBF for over 30 d, a preferential carbonated-hydroxyapatite was formed on the surfaces of the films, which suggests that the MAO-treated titanium has a promising positive biological response.展开更多
A micro-arc oxidation（MAO）/zinc stearate（ZnSA） composite coating was fabricated via MAO processing and subsequent sealing with electrodeposition of a superhydrophobic ZnSA. The surface morphologies,chemical compos...A micro-arc oxidation（MAO）/zinc stearate（ZnSA） composite coating was fabricated via MAO processing and subsequent sealing with electrodeposition of a superhydrophobic ZnSA. The surface morphologies,chemical composition and corrosion resistance of the coatings were investigated using field-emission scanning electron microscopy, Fourier transform infrared, X-ray diffraction and electrochemical and hydrogen evolution measurements. Results indicated that the MAO coating was efficiently sealed by the following superhydrophobic ZnSA coating. The MAO/ZnSA composite coating significantly enhanced the corrosion resistance of Mg alloy Mg-4 Li-1 Ca due to its superhydrophobic function. Additionally, corrosion mechanism was suggested and discussed for the composite coating.展开更多
Most researches on micro-arc oxidation mainly focus on the application rather than discovering the evolution of residual stresses. However, residual stresses in the surface coatings of structural components have adver...Most researches on micro-arc oxidation mainly focus on the application rather than discovering the evolution of residual stresses. However, residual stresses in the surface coatings of structural components have adverse effects on their properties, such as fatigue life, dimensional stability and corrosion resistance, etc. The micro-arc oxidation ceramic coatings are produced on the surfaces of 6061 aluminum alloy by a homemade asymmetric AC type of micro-arc oxidation equipment of 20 kW. A constant current density of 4.4___0.1 A/dm2 and a self-regulated composite electrolyte are used. The micro-arc oxidation treatment period ranges from 10 min to 40 min, and the thickness of the ceramic coatings is more than 20 Bin. Residual stresses attributed to 7-A1203 constituent in the coatings at different micro-arc oxidation periods are analyzed by an X-ray diffractometer using the sin2~u method. The analysis results show that the residual stress in the ceramic coatings is compressive in nature, and it increases first and then decreases with micro-arc oxidation time increase. The maximum stress value is 1 667_＋20 MPa for period of 20 min. Through analyzing the coating thickness, surface morphology and phase composition, it is found that the residual stress in the ceramic coatings is linked closely with the coating growth, the phase composition and the micro cracks formed. It is also found that both the heat treatment and the ultrasonic action release remarkably the residual compressive stress. The heat treatment makes the residual compressive stress value decrease 1 378 MPa. The ultrasonic action even alters the nature of the residual stress, making the residual compressive stress change into a residual tensile stress.展开更多
基金the Open Foundation of National Defense Key Discipline Laboratory of Light Alloy Processing Science and Technology (Grant No.gf201401001)the National Natural Science Foundation of China (Grant No.51171154)
文摘A composite coating containing hexagonal boron nitride（hBN） particles and titanium oxide（TiO_2） was formed on the surface of Ti-6Al-4V alloy via micro-arc oxidation（MAO）. The effect of quantity of the hBN-particles added into electrolyte on microstructure, composition, and wear behavior of the resulting composite coatings was investigated. Microstructure, phase composition, and tribological behavior of the resulting MAO coatings were evaluated via scanning electron microscopy, X-ray diffraction, and ball-on-disc abrasive tests. The results reveal that the TiO_2/hBN composite coating consisting of rutile TiO_2, anatase TiO_2, and an hBN phase was less porous than particle-free coating. Furthermore, the presence of hBN particles in the MAO coating produced an improved anti-friction property. The composite coating produced in the electrolyte containing 2 g/L of hBN particles exhibited the best wear resistance.The outer loose layer of the MAO coatings was removed by a mechanical polishing process, which led to a significant improvement in the wear resistance and anti-friction properties of the MAO coatings and highlighted an essential lubricating role of hBN particles in the composite coatings. However, wear mechanism of the MAO coatings was not relevant to the presence of hBN particles, where fatigue wear dominated the anti-fraction properties of the MAO coatings with and without hBN particles.
文摘Magnesium and its alloys have been used in many industries, but they are reactive and require protection against aggressive environments. In this study, oxide coatings were applied on AZ91D magnesium alloy using micro-arc oxidation （MAO） process. Then, in order to seal the pores of the MAO coatings, the samples were immersed in cerium bath for different times. The surface morphologies and compositions of the coatings were analyzed by scanning electron microscopy （SEM） and X-ray energy dispersive spectroscopy （EDS）, respectively. The corrosion behavior of the coatings was investigated with electrochemical impedance spectroscopy （EIS） and potentiodynamic polarization tests in 3.5 wt.% NaCl solution. The amount of the porosity of the coating was measured by electrochemical method. It was found that the sealing treatments by immersion in cerium bath successfully sealed the pores of the MAO coatings. The results of the corrosion tests showed that the MAO coating which was sealed in Ce bath for 10 min enhanced the corrosion resistance of the substrate significantly. Furthermore, this coating had the lowest amount of the porosity among the coatings.
文摘Ceramic coatings were prepared on AZ91 D Mg alloy by micro-arc oxidation （MAO） in aluminate electrolytes, with Al2O3 nano-additive suspending at different concentrations. Effects of nano-additive concentration on the structure, phase composition, hardness and anti-corrosion property of the MAO coatings were analyzed by scanning electron microscopy, X-ray diffraction, micro-hardness test and electrochemical method, respectively. The results revealed that Al2O3 nano-particles were mostly incorporated into ceramic coating chemically, transferred into MgAl2O4, rather than being trapped mechanically during MAO process. With the increase of Al2O3 concentration, the voltage-time response, content of MgAl2O4, hardness and anti-corrosion property increased. However, when the concentration varied from 10 g/L to 15 g/L, these behaviors and properties changed only a little. This result indicated that, after the concentration of Al2O3 nano-additive reaching 10 g/L, the incorporation of Al2O3 nano-particles turned into a saturation state, due to the complex process during MAO treatment. Therefore, 10 g/L might be a proper concentration for MAO coating to incorporate Al2O3 nano-particles,
基金supported by the Ministry of Education of the People's Republic of China (Contract No. 210051)
文摘To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding SiC nano-particles into electrolyte during MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM） and X-ray diffraction （XRD）,respectively.Furthermore,the corrosion performance of the coatings was evaluated via a three-electrode system in a 3.5 wt pct NaCl solution.From the obtained morphology of alumina coatings,it was believed that the Al2O3 coatings embedded with SiC nano-particles were formed.The electrochemical impedance spectroscopy （EIS） plots and potentiodynamic polarization plots of the Al2O3 coatings with and without SiC nano-particles at different current densities reveal that the Al2O3 coatings with SiC nano-particles formed at 10 A/dm 2 showed the better corrosion resistance than the other coatings produced at 5 and 7 A/dm 2.
基金supported by the Shanghai Science and Technology R&D Fund(Nos.0952nm04400,07JC14057 and 08ZR1421600)the National Basic Research Fund(No. 2005CB623901)the National Natural Science Foundation of China(Nos.30700170,30973041 and 81271959)
文摘Micro-arc oxidized Cu-incorporated TiO2 coatings （Cu-TiO2） were prepared in the Ca, P, Cu-containing electrolyte to obtain an implant material with superior biological activity and antibacterial property. The surface topography, phase, and element composition of the TiO2 and Cu-TiO2 coatings were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, and energy-dispersive X-ray spectrometry （EDS）, respectively. Staphylococcus aureus （S. aureus） was selected to evaluate the antibacterial property of the Cu-TiO2 coatings, whereas osteoblastic MG63 cells were cultured on the coatings to investigate the biological activity. The obtained results demonstrated that Cu element was successfully incorporated into the porous nano-structured TiO2 coatings, which did not alter apparently the surface topography and phase composition of the coatings as compared to the Cu-free TiO2 coatings. Moreover, the antibacterial studies suggested that the Cu-incorporated TiO2 coatings could significantly inhibit the adhesion of S. aureus. In addition, the in vitro biological evaluation displayed that the adhesion, proliferation and differentiation of MG63 cells on the Cu-incorporated coatings were enhanced as compared to those on the Cu-free coatings and Ti plates. In conclusion, the innovative Cu-incorporated nano-structured TiO2 coatings on Ti substrate with excellent antibacterial property and biological activity are promising candidates for orthopedic implant.
基金Jilin Provincial Science & Technology Department for supporting this research under contract number 20080505
文摘To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 Hz,700 Hz,and 900 Hz） were produced during the MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM）,field emission scanning electron microscopy （FESEM）,and X-ray diffraction （XRD）.The surface roughness of the coatings was characterized by confocal laser scanning microscopy （CLSM）.Simultaneously,the tribological properties of the composite coatings were evaluated by using a universal materials tester （UMT）.The results shows that the wear resistance of the ceramic coatings with SiC nano-particles was improved significantly compared to the ceramic coatings without SiC nano-particles.Furthermore,the composite coating formed at current frequency 900 Hz showed the better wear resistance than the others.
文摘Micro-arc oxidation (MAO) method was used for the surface modification of an Mg-5wt.%Li alloy. Ceramic coatings were in-situ fabricated on the Mg-Li alloy. The morphology feature,phase composition,and corrosion-resistance of the formed ceramic coatings were studied by SEM,XRD,and electrochemical methods,respectively. The results showed that the coatings produced in a sodium silicate solution system were composed of MgO and Mg2SiO4. The ceramic coating became thicker and the content of Mg2SiO4 phase increase...
基金financially supported by the Postdoctoral Science Research Developmental Foundation of Heilongjiang Province (No. LBH-Q12004)the Education Department Foundation from Heilongjiang Province (No.11521575)the Science and Technology Project of Mudanjiang, Heilongjiang Province, China (No.G2012g0008)
文摘Compound ceramic coatings with the main crystalline of Al_2TiO_5（in the as-prepared coating without treatment） were prepared in situ on the surface Ti-6Al-4V alloy by means of pulsed bipolar micro-arc oxidation in Na AlO_2 solution. For the purpose of studying the antioxidation properties of the samples, the coated samples treated in argon and the as-coated samples were calcined in air at 1000 °C. And the related characteristics were investigated by X-ray diffraction（XRD）, scanning electron microscopy（SEM） and X-ray fluorescence（XRF） spectroscopy, respectively. The results show that, when it was calcined in air for 1 h, Al_2TiO_5in the as-prepared coating decomposed and transformed into α-Al_2O_3 and rutile TiO_2.However, after almost 4 h in argon, Al_2TiO_5in the asprepared coating decomposed and the final coating surface contents are completely α-Al_2O_3, and those of the middle interface are mainly Al_2O_3 and Ti_2O_3. The morphologies of the coatings after calcination in argon and air are different.High-temperature oxidation occurred violently in the alloy substrate without coatings. Furthermore, the weight gain curves of the as-prepared samples and the coated samples treated in argon both show a parabolic shape.
文摘Micro-arc oxidation(MAO)coatings were fabricated on AZ31 magnesium alloy and the effect of Na2CO3 on the energy consumption was studied.The results show that the concentration of Na2CO3 has a critical effect on the discharge behavior of MAO process.With increasing the Na2CO3 concentration in the electrolyte,the arcing voltage and working voltage decrease.A proper concentration is needed to achieve the highest growth rate of the coatings and the lowest energy consumption per unit coating volume.The addition of Na2CO3 decreases the arcing and working voltage of MAO discharge.It is attributed to that the Na2CO3 leads to much more micropores due to the decomposition of MgCO3 to produce more gas.
基金This work was financially supported bythe Doctoral Foundation ofYanshan University(B41)theScience and Technology Foundation ofYanshan University(YDJJ0169).
文摘In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions and the Key Laboratory of Advanced Welding Technology of Jiangsu Province, China (No. JSAWT-11)
文摘Micro-arc oxidation （MAO） process was cartied out in an optimized dual electrolyte system to fabricate a compact, smooth, and corrosion resistant coating on ZK60 Mg alloy. The microstructural characteristics of coating were investigated by scanning electron microscopy （SEM） coupled with an energy dispersive spectrometer （EDS） and X-ray diffraction （XRD）. Test of mass loss was conducted at a 3.5 % NaCl solution to assess the resistance to corrosion. The bonding strength between the coating and ZK60 substrate was evaluated using scratch experiment. The results reveal that MgA1204 and MgO are the main phases of ceramic coating obtained in the dual electrolyte system. The corrosion rate of coating prepared in the optimized dual electrolyte is only 0.0061 g.m-2.h-1, which demonstrates excellent corrosion resistance. This is mainly due to the compact, uniform coating with high bonding strength.
基金Project(50521503)supported by the National Natural Science Foundation of ChinaProject(2007CB714704)supported by the National Basic Research Program of ChinaProject(200536)supported by the Foundation of the Author of National Excellent Doctoral Dissertation of China
文摘Micro-arc oxidation(MAO)coating was prepared on Ti6Al4V alloy surface and its characterizations were detected by Vickers hardness tester,profilometer,scanning electric microscope(SEM),energy dispersive X-ray spectrometer(EDX)and X-ray diffractometer(XRD).Fretting wear behaviors of the coating and its substrate were comparatively tested without lubrication under varied displacement amplitudes(D)in a range of 3-40μm,constant normal load(Fn)of 300 N and frequency of 5 Hz.The results showed that the MAO coating,presenting rough and porous surface and high hardness,mainly consisted of rutile and anatase TiO2 phases.Compared with the substrate,the MAO coating could shift the mixed fretting regime(MFR)and slip regime(SR)to a direction of smaller displacement amplitude.In the partial slip regime(PSR),lower friction coefficients and slight damage appeared due to the coordination of elastic deformation of contact zones.In the MFR,the friction coefficient of the coating was lower than that of the substrate as a result of the prevention of plastic deformation by the hard ceramic surface.With the increase of the displacement amplitude,the degradation of the MAO coating and the substrate increased extremely.The fretting wear mechanisms of the coating were abrasive wear and delamination with some material transfer of specimen.In addition,the coating presented a better property for alleviating fretting wear.
基金supported by the Program for New Century Excellent Talents from the Ministry of Education(Grant No. NCET-2011)
文摘In the present study, titania coatings were prepared under different current density conditions in micro-arc oxidation （MAO） process on titanium alloy in NaAlO2 solution. The aim of this work was to study the effects of current density on the microstructure of titania coatings. The morphology and phase composition of the coatings were investigated by field emission scanning electron microscopy （FESEM）, X-ray diffraction （XRD） and Raman spectra. The thickness and surface roughness of the coatings were characterized by confocal laser Scanning Microscopy （CLSM）. The results showed that the coatings were composed of crystalline anatase and rutile phases of TiO2, and contain a network of evenly distributed small pores. It has also shown that an increase in current density leads to an increase in rutile content.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50171026) and the State Key Laboratory of Tribology, Tsinghua University (No. SKLT04-08)
文摘In the NaAlO2-Na2SiO3 compound system, the ceramic coatings were prepared on magnesium alloy by micro-arc oxidation. The morphology, phase composition, and thermal shock resistance of the ceramic coatings were studied by scanning electron microscope, X-ray diffraction and thermal shock tests, respectively. The results showed that the ceramic coating contains MgO, MgAl2O4, as well as a little amount of MgESiO4. The thickness of the ceramic coatings increases with the current density increasing, when the current density is 12 A·dm^-2, the thermal shock resistance of the produced ceramic coating is the best. The hardness of the ceramic coating is up to 10 GPa or so.
基金Project supported by the Natioanl Defence Major Safety Foundation of China (6133002B2008)
文摘The regulation of ceramic coating formed by micro-arc oxidation on Mg-11Gd-1Y-0.5Zn (wt.%) magnesium alloys was investigated by scanning electron microscopy (SEM) and X-ray diffractometer (XRD). The relation of phase structure and corrosion resistance of MgO coating formed by micro-arc oxidation in different growth stages was analyzed. The results showed that the growth of coating accorded with linear regularity in the initial stage of micro-arc oxidation, which was the stage of anodic oxidation controlled ...
基金financially supported by the National University Student Innovation Program (No. 101011202)
文摘A ceramic layer was prepared on the surface of Al2O3f/ZL109 composites by means of micro-arc oxidation （MAO） technique. The surface morphology and phase constituent of the ceramic layer were analyzed using scanning electron microscope and X-ray diffraction. The polarization curves of the composites before and after MAO treatment were measured and analyzed. The results showed that after Al2O3f/ZL109 composites were treated using MAO technique in silicate solution, the ceramic layer formed, and it was composed of Al, Si, and mullite phase. Al and Si came from Al alloy matrix of the composites, and the mullite phase formed in process of MAO. Al2O3 fiber in the composites affects the electric conductivity of the composites, the MAO reaction is promoted, and the cera- mic layer forming on the composite material side is slightly thicker than that on the Al alloy side. After Al2O3f/ZL109 composites were treated using MAO technique, the corro- sion resistance of the composites is significantly improved.
基金supported by the Program for New Century Excellent Talents from the Ministry of Education (Grant No. NCET-11-0984)
文摘An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corrosion resistance of the coatings were discussed. Morphology and phase constituents of the MAO coatings produced in electrolyte with different Na2SiO3 concentrations were analyzed by scanning electron microscopy, confocal laser scanning microscopy and X-ray diffraction. Electrochemical tests were conducted to evaluate the corrosion resistance of the coatings. The results show that the corrosion resistance of the coated joints is much better than that without the ceramic coating, and the ceramic coating produced in the electrolyte with Na2SiO3 concentration 20 g/L showed better corrosion resistance than the others.
基金This work is financially supported by the National Natural Science Foundation of China (Nos. 50572029 and 50272021)the Natural Science Foundation of Guangdong Province, China (No. 0425786).
文摘Micro-arc oxidation （MAO） is an enhanced chemical technology in an electrolyte medium to obtain coating structures on valve-metal surfaces. Titanium oxide films obtained by MAO in the sodium phosphate electrolyte were investigated. The films were composed mainly of TiO2 phases in the form of anatase and mille and enriched with Na and P elements at the surface. Their apafite-inducing ability was evaluated in a simulated body fluid （SBF）. When immersing in SBF for over 30 d, a preferential carbonated-hydroxyapatite was formed on the surfaces of the films, which suggests that the MAO-treated titanium has a promising positive biological response.
基金supported by the National Natural Science Foundation of China (No. 51571134)the Scientific Research Foundation of Shandong University of Science and Technology (SDUST) for Recruited Talents (No. 2013RCJJ006)SDUST Research Fund (No. 2014TDJH104)
文摘A micro-arc oxidation（MAO）/zinc stearate（ZnSA） composite coating was fabricated via MAO processing and subsequent sealing with electrodeposition of a superhydrophobic ZnSA. The surface morphologies,chemical composition and corrosion resistance of the coatings were investigated using field-emission scanning electron microscopy, Fourier transform infrared, X-ray diffraction and electrochemical and hydrogen evolution measurements. Results indicated that the MAO coating was efficiently sealed by the following superhydrophobic ZnSA coating. The MAO/ZnSA composite coating significantly enhanced the corrosion resistance of Mg alloy Mg-4 Li-1 Ca due to its superhydrophobic function. Additionally, corrosion mechanism was suggested and discussed for the composite coating.
基金supported by National Natural Science Foundation of China(Grant No.51171167)Hebei Provincial Natural Science Foundation of China(Grant No.A2011203068)
文摘Most researches on micro-arc oxidation mainly focus on the application rather than discovering the evolution of residual stresses. However, residual stresses in the surface coatings of structural components have adverse effects on their properties, such as fatigue life, dimensional stability and corrosion resistance, etc. The micro-arc oxidation ceramic coatings are produced on the surfaces of 6061 aluminum alloy by a homemade asymmetric AC type of micro-arc oxidation equipment of 20 kW. A constant current density of 4.4___0.1 A/dm2 and a self-regulated composite electrolyte are used. The micro-arc oxidation treatment period ranges from 10 min to 40 min, and the thickness of the ceramic coatings is more than 20 Bin. Residual stresses attributed to 7-A1203 constituent in the coatings at different micro-arc oxidation periods are analyzed by an X-ray diffractometer using the sin2~u method. The analysis results show that the residual stress in the ceramic coatings is compressive in nature, and it increases first and then decreases with micro-arc oxidation time increase. The maximum stress value is 1 667_＋20 MPa for period of 20 min. Through analyzing the coating thickness, surface morphology and phase composition, it is found that the residual stress in the ceramic coatings is linked closely with the coating growth, the phase composition and the micro cracks formed. It is also found that both the heat treatment and the ultrasonic action release remarkably the residual compressive stress. The heat treatment makes the residual compressive stress value decrease 1 378 MPa. The ultrasonic action even alters the nature of the residual stress, making the residual compressive stress change into a residual tensile stress.
