The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the...The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the TiNb binary alloy system during spinodal decomposition,and then the formation mechanism of core-shell structure was revealed.In addition,the influences of initial temperature gradient,average temperature,and initial concentration distribution of the system on the core-shell structure were investigated.Results show that the initial concentration gradient is the key factor for forming the core-shell structure.Besides,larger initial temperature gradient and higher average temperature can promote the formation of core-shell structure,which can be stabilized by adjusting the initial concentration distribution of the Nb-rich region in TiNb binary alloy.As a theoretical basis,this research provides a novel and simple strategy for the preparation of TiNb-based alloys and other materials with peculiar core-shell structures and desirable mechanical and physical properties.展开更多
Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and intro...Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and introducing CO_(2)nanobubble technology to improve the performance of cement-fly ash-based backfill materials(CFB).The properties including fluidity,setting time,uniaxial compressive strength,elastic modulus,porosity,microstructure and CO_(2)storage performance were systematically studied through methods such as fluidity evaluation,time test,uniaxial compression test,mercury intrusion porosimetry(MIP),scanning electron microscopy-energy dispersive spectroscopy analysis(SEM-EDS),and thermogravimetric-differential thermogravimetric analysis(TG-DTG).The experimental results show that the density and strength of the material are significantly improved under the synergistic effect of fractal dimension and CO_(2)nanobubbles.When the fractal dimension reaches 2.65,the mass ratio of coarse and fine aggregates reaches the optimal balance,and the structural density is greatly improved at the same time.At this time,the uniaxial compressive strength and elastic modulus reach their peak values,with increases of up to 13.46%and 27.47%,respectively.CO_(2)nanobubbles enhance the material properties by promoting hydration reaction and carbonization.At the microscopic level,CO_(2)nanobubble water promotes the formation of C-S-H(hydrated calcium silicate),C-A-S-H(hydrated calcium aluminium silicate)gel and CaCO_(3),which is the main way to enhance the performance.Thermogravimetric studies have shown that when the fractal dimension is 2.65,the dehydration of hydration products and the decarbonization process of CaCO_(3)are most obvious,and CO_(2)nanobubble water promotes the carbonization reaction,making it surpass the natural state.The CO_(2)sequestration quality of cement-fly ash-based materials treated with CO_(2)nanobubble water at different fractal dimensions increased by 12.4wt%to 99.8wt%.The results not only provide scientific insights for the design and implementation of low-carbon filling materials,but also provide a solid theoretical basis for strengthening green mining practices and promoting sustainable resource utilization.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
Alkali-free SiO_(2)-Al_(2)O_(3)-CaO-MgO with different SiO_(2)/Al_(2)O_(3)mass ratios was prepared by conventional melt quenching method.The glass network structure,thermodynamic properties and elastic modulus changes...Alkali-free SiO_(2)-Al_(2)O_(3)-CaO-MgO with different SiO_(2)/Al_(2)O_(3)mass ratios was prepared by conventional melt quenching method.The glass network structure,thermodynamic properties and elastic modulus changes with SiO_(2)and Al_(2)O_(3)ratios were investigated using various techniques.It is found that when SiO_(2)is replaced by Al_(2)O_(3),the Q^(4) to Q^(3) transition of silicon-oxygen network decreases while the aluminum-oxygen network increases,which result in the transformation of Si-O-Si bonds to Si-O-Al bonds and an increase in glass network connectivity even though the intermolecular bond strength decreases.The glass transition temperature(T_(g))increases continuously,while the thermal expansion coefficient increases and high-temperature viscosity first decreases and then increases.Meanwhile,the elastic modulus values increase from 93 to 102 GPa.This indicates that the elastic modulus is mainly affected by packing factor and dissociation energy,and elements with higher packing factors and dissociation energies supplant those with lower values,resulting in increased rigidity within the glass.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
Exogenous organic input impacts soil phosphorus transformation.Meanwhile,dissolved organic matter(DOM)is crucial for biogeochemical functions.Nevertheless,the interaction between the structural composition of DOM and ...Exogenous organic input impacts soil phosphorus transformation.Meanwhile,dissolved organic matter(DOM)is crucial for biogeochemical functions.Nevertheless,the interaction between the structural composition of DOM and phosphorus during the soil formation process of phosphogypsum(PG)remains unknown.This study explores the interaction between the structural composition of DOM and phosphorus in enhanced PG under the participation of fungal microorganisms through different application amounts of exogenous organic matter and culture time.Results show that application of exogenous organic matter led to varying degrees of increase in dissolved organic carbon(DOC)concentration and humification extent in the soil-like substrate.Additionally,the relative abundance of protein-like component C3 exhibited a trend of initial increase followed by decline over time.The contents of available phosphorus(AP),microbial biomass phosphorus(MBP),and active phosphorus pools(Active-P)in the soil-like substrate are all enhanced overall.Furthermore,a significant correlation exists between DOC and AP as well as MBP.This suggests that DOM is a crucial factor in enhancing the phosphorus availability of the soil-like substrate.The enrichment of known phosphate-solubilizing fungi in culturing favors the decomposition,activation and utilization of hard-to-mineralize phosphorus components in the soil-like substrate.These findings help understand DOM’s biogeochemical behavior and offer insights into PG utilization and the sustainable development of China’s phosphorus industry.展开更多
Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspher...Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.展开更多
Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we...Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we found that freeze-thaw leaching(FTL)effectively complements the low removal rate of chemical leaching,and investigated the effects of different numbers of FTL on Cd contamination,soil chemical properties and microbial communities.The results showed that repeated FTL significantly reduced(P<0.05)the total Cd content in the top soil(19.02%-49.35%)and subsoil(0.41%-21.13%)and promoted the transformation of Cd to a more stable form,mainly through various removal mechanisms such as complexation,ion-exchange,and chemical precipitation.This finding was supported by reductions in several soil properties,including pH,available potassium(AK),and available phosphorus(AP).FTL treatment initially increased the bioavailability of Cd compared to chemical leaching,but bioavailability of Cd progressively decreased as the number of freeze-thaw cycles increased.Additionally,FTL reduced the richness and diversity of bacteria communities,destabilized ecological symbiotic networks,while increasing the richness and diversity of fungi in the soil.Various model analyses indicated that FTL treatment,available Cd,soil pH,AP and AK were the key drivers influencing the changes in microbial community structure.This study provides new insights and scientific bases for the effective management of heavy metal pollution in agricultural soils,the restoration of ecosystem health,and the improvement of soil sustainability.展开更多
Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures ...Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.展开更多
In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honey...In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.展开更多
Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'...Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.展开更多
To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and ...To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and waste plastic(HDPE),into a blended coal sample and carried out pyrolysis experiments.The pyrolysis process and the microstructure of char were systematically characterized using various analytical techniques,including thermogravimetric analysis(TGA),X-ray diffraction(XRD)and Raman spectroscopy.Data correlation analysis was performed to reveal the mechanism of carbon structural ordering evolution within the critical temperature range(350−600℃)from colloidal layer formation to semi-coke conversion in coking coal,and to elucidate the regulatory effects of different additives on coal pyrolysis pathways.The results indicate that HDPE releases free radicals during high-temperature pyrolysis,accelerating the pyrolysis reaction and increase the yield of volatile components.Conversely,CTP facilitates pyrolysis at low temperatures through its light components,thereby delaying high-temperature reactions due to the colloidal layer’s effect.XRD results indicate that during the process of pyrolysis,there is a progressive decrease in the interlayer spacing of aromatic layers(d002),while the aromatic ring stacking height(L_(c))and lateral size(L_(a))undergo significant of carbon skeleton ordering.Further comparative reveals that CTP partially suppresses structural ordering at low temperatures,whereas HDPE promotes the condensation and alignment of aromatic clusters via a free radical mechanism.Raman spectroscopy reveals a two-stage reorganization mechanism in the microstructure of the coal char:the decrease in the I_(D)/I_(G)ratio between 350 and 550℃is primarily attributed to the cleavage of aliphatic side chains and cross-linking bonds,leading to a reduction in defective structures;whereas the increase in ID/IG between 550 and 600℃is closely associated with enhanced condensation reactions of aromatic structures.Correlation analysis further demonstrates progressive graphitization during pyrolysis,with a significant positive correlation(R^(2)>0.85)observed between d002 and the full width at half maximum of the G-band(FWHM-G).展开更多
In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented...In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.展开更多
Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(...Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(PAm)]·2H_(2)O(2)were determined by single-crystal X-ray diffraction,IR spectroscopy,and powder X-ray diffraction.Hirshfeld surface analysis provided quantitative insights into the intermolecular interactions within the complexes,while molecular docking studies elucidated their binding modes and affinities toward urease.Furthermore,the biological activities of both complexes were systematically evaluated through a range of assays,including DNA binding,urease inhibition,antibacterial activity,and in vitro cytotoxicity against cancer cells.Both complexes exhibited binding affinity for DNA and displayed notable urease inhibitory activity.Under in vitro conditions,both complexes showed appreciable cytotoxicity toward HepG2 cells with efficacy comparable to clinically used platinumbased anticancer agents.CCDC:2479943,1;2479944,2.展开更多
Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and...Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.展开更多
Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimizat...Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.展开更多
SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu...SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-e...Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.展开更多
Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler ...Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.展开更多
基金National Natural Science Foundation of China(12372152)Guangdong Basic and Applied Basic Research Foundation(2023A1515011819,2024A1515012469)Shandong Provincial Natural Science Foundation(ZR2023MA058)。
文摘The core-shell structure in bulk TiNb binary alloy was designed and studied by phase-field simulations,where various core-shell structures were obtained by precise control of the initial and boundary conditions of the TiNb binary alloy system during spinodal decomposition,and then the formation mechanism of core-shell structure was revealed.In addition,the influences of initial temperature gradient,average temperature,and initial concentration distribution of the system on the core-shell structure were investigated.Results show that the initial concentration gradient is the key factor for forming the core-shell structure.Besides,larger initial temperature gradient and higher average temperature can promote the formation of core-shell structure,which can be stabilized by adjusting the initial concentration distribution of the Nb-rich region in TiNb binary alloy.As a theoretical basis,this research provides a novel and simple strategy for the preparation of TiNb-based alloys and other materials with peculiar core-shell structures and desirable mechanical and physical properties.
基金financially supported by the China Scholarship Council(CSC)。
文摘Mine filling materials urgently need to improve mechanical properties and achieve low-carbon transformation.This study explores the mechanism of the synergistic effect of optimizing aggregate fractal grading and introducing CO_(2)nanobubble technology to improve the performance of cement-fly ash-based backfill materials(CFB).The properties including fluidity,setting time,uniaxial compressive strength,elastic modulus,porosity,microstructure and CO_(2)storage performance were systematically studied through methods such as fluidity evaluation,time test,uniaxial compression test,mercury intrusion porosimetry(MIP),scanning electron microscopy-energy dispersive spectroscopy analysis(SEM-EDS),and thermogravimetric-differential thermogravimetric analysis(TG-DTG).The experimental results show that the density and strength of the material are significantly improved under the synergistic effect of fractal dimension and CO_(2)nanobubbles.When the fractal dimension reaches 2.65,the mass ratio of coarse and fine aggregates reaches the optimal balance,and the structural density is greatly improved at the same time.At this time,the uniaxial compressive strength and elastic modulus reach their peak values,with increases of up to 13.46%and 27.47%,respectively.CO_(2)nanobubbles enhance the material properties by promoting hydration reaction and carbonization.At the microscopic level,CO_(2)nanobubble water promotes the formation of C-S-H(hydrated calcium silicate),C-A-S-H(hydrated calcium aluminium silicate)gel and CaCO_(3),which is the main way to enhance the performance.Thermogravimetric studies have shown that when the fractal dimension is 2.65,the dehydration of hydration products and the decarbonization process of CaCO_(3)are most obvious,and CO_(2)nanobubble water promotes the carbonization reaction,making it surpass the natural state.The CO_(2)sequestration quality of cement-fly ash-based materials treated with CO_(2)nanobubble water at different fractal dimensions increased by 12.4wt%to 99.8wt%.The results not only provide scientific insights for the design and implementation of low-carbon filling materials,but also provide a solid theoretical basis for strengthening green mining practices and promoting sustainable resource utilization.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金Supported by the National Key Research Program(No.2024-1129-954-112)National Natural Science Foundation of China(No.52372033)Guangxi Science and Technology Major Program(No.AA24263054)。
文摘Alkali-free SiO_(2)-Al_(2)O_(3)-CaO-MgO with different SiO_(2)/Al_(2)O_(3)mass ratios was prepared by conventional melt quenching method.The glass network structure,thermodynamic properties and elastic modulus changes with SiO_(2)and Al_(2)O_(3)ratios were investigated using various techniques.It is found that when SiO_(2)is replaced by Al_(2)O_(3),the Q^(4) to Q^(3) transition of silicon-oxygen network decreases while the aluminum-oxygen network increases,which result in the transformation of Si-O-Si bonds to Si-O-Al bonds and an increase in glass network connectivity even though the intermolecular bond strength decreases.The glass transition temperature(T_(g))increases continuously,while the thermal expansion coefficient increases and high-temperature viscosity first decreases and then increases.Meanwhile,the elastic modulus values increase from 93 to 102 GPa.This indicates that the elastic modulus is mainly affected by packing factor and dissociation energy,and elements with higher packing factors and dissociation energies supplant those with lower values,resulting in increased rigidity within the glass.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金supported by the Science and Technology Major Program of Yunnan(No.202402AG0500103)the Industrial Innovation Talent Project of Yunnan(No.XDYC-CYCX-2023007)the National Key Research and Development Program of China(No.2023YFC3709100).
文摘Exogenous organic input impacts soil phosphorus transformation.Meanwhile,dissolved organic matter(DOM)is crucial for biogeochemical functions.Nevertheless,the interaction between the structural composition of DOM and phosphorus during the soil formation process of phosphogypsum(PG)remains unknown.This study explores the interaction between the structural composition of DOM and phosphorus in enhanced PG under the participation of fungal microorganisms through different application amounts of exogenous organic matter and culture time.Results show that application of exogenous organic matter led to varying degrees of increase in dissolved organic carbon(DOC)concentration and humification extent in the soil-like substrate.Additionally,the relative abundance of protein-like component C3 exhibited a trend of initial increase followed by decline over time.The contents of available phosphorus(AP),microbial biomass phosphorus(MBP),and active phosphorus pools(Active-P)in the soil-like substrate are all enhanced overall.Furthermore,a significant correlation exists between DOC and AP as well as MBP.This suggests that DOM is a crucial factor in enhancing the phosphorus availability of the soil-like substrate.The enrichment of known phosphate-solubilizing fungi in culturing favors the decomposition,activation and utilization of hard-to-mineralize phosphorus components in the soil-like substrate.These findings help understand DOM’s biogeochemical behavior and offer insights into PG utilization and the sustainable development of China’s phosphorus industry.
基金supported by the National Key R&D Program of China(No.2021YFB3501102).
文摘Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.
基金supported by the National Natural Science Foundation of China(No.42077135).
文摘Heavy metal contamination of soil is one of the major challenges to sustainable agriculture.This contamination can be transmitted through the soil food chain and poses a serious threat to human health.In this study,we found that freeze-thaw leaching(FTL)effectively complements the low removal rate of chemical leaching,and investigated the effects of different numbers of FTL on Cd contamination,soil chemical properties and microbial communities.The results showed that repeated FTL significantly reduced(P<0.05)the total Cd content in the top soil(19.02%-49.35%)and subsoil(0.41%-21.13%)and promoted the transformation of Cd to a more stable form,mainly through various removal mechanisms such as complexation,ion-exchange,and chemical precipitation.This finding was supported by reductions in several soil properties,including pH,available potassium(AK),and available phosphorus(AP).FTL treatment initially increased the bioavailability of Cd compared to chemical leaching,but bioavailability of Cd progressively decreased as the number of freeze-thaw cycles increased.Additionally,FTL reduced the richness and diversity of bacteria communities,destabilized ecological symbiotic networks,while increasing the richness and diversity of fungi in the soil.Various model analyses indicated that FTL treatment,available Cd,soil pH,AP and AK were the key drivers influencing the changes in microbial community structure.This study provides new insights and scientific bases for the effective management of heavy metal pollution in agricultural soils,the restoration of ecosystem health,and the improvement of soil sustainability.
基金financially supported by National Natural Science Foundation of China(Grant Nos.12141203,52202083,W2421013)the Natural Science Foundation Project of Shaanxi Province(Grant No.2024JC-YBMS-450)+1 种基金the Sichuan Science and Technology Program(Grant No.2024YFHZ0265)the Open Project of High-end Equipment Advanced Materials and Manufacturing Technology Laboratory(Grant No.2023KFKT0005)。
文摘Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.
基金the financial supports from National Key R&D Program for Young Scientists of China(Grant No.2022YFC3080900)National Natural Science Foundation of China(Grant No.52374181)+1 种基金BIT Research and Innovation Promoting Project(Grant No.2024YCXZ017)supported by Science and Technology Innovation Program of Beijing institute of technology under Grant No.2022CX01025。
文摘In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.
文摘Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.
基金Supported by National Natural Science Foundation of China(22378180,22078141)Education Department Foundation of Liaoning Province(JYTMS20230960)。
文摘To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and waste plastic(HDPE),into a blended coal sample and carried out pyrolysis experiments.The pyrolysis process and the microstructure of char were systematically characterized using various analytical techniques,including thermogravimetric analysis(TGA),X-ray diffraction(XRD)and Raman spectroscopy.Data correlation analysis was performed to reveal the mechanism of carbon structural ordering evolution within the critical temperature range(350−600℃)from colloidal layer formation to semi-coke conversion in coking coal,and to elucidate the regulatory effects of different additives on coal pyrolysis pathways.The results indicate that HDPE releases free radicals during high-temperature pyrolysis,accelerating the pyrolysis reaction and increase the yield of volatile components.Conversely,CTP facilitates pyrolysis at low temperatures through its light components,thereby delaying high-temperature reactions due to the colloidal layer’s effect.XRD results indicate that during the process of pyrolysis,there is a progressive decrease in the interlayer spacing of aromatic layers(d002),while the aromatic ring stacking height(L_(c))and lateral size(L_(a))undergo significant of carbon skeleton ordering.Further comparative reveals that CTP partially suppresses structural ordering at low temperatures,whereas HDPE promotes the condensation and alignment of aromatic clusters via a free radical mechanism.Raman spectroscopy reveals a two-stage reorganization mechanism in the microstructure of the coal char:the decrease in the I_(D)/I_(G)ratio between 350 and 550℃is primarily attributed to the cleavage of aliphatic side chains and cross-linking bonds,leading to a reduction in defective structures;whereas the increase in ID/IG between 550 and 600℃is closely associated with enhanced condensation reactions of aromatic structures.Correlation analysis further demonstrates progressive graphitization during pyrolysis,with a significant positive correlation(R^(2)>0.85)observed between d002 and the full width at half maximum of the G-band(FWHM-G).
基金Supported by the National Key Research and Development Program of Traditional Chinese Medicine Modernization Project,China(No.2023YFC3504000)the Science and Technology Development Project of Jilin Province,China(No.20240404043ZP)the Science and Technology Innovation Cooperation Project of Changchun Science and Technology Bureau and Chinese Academy of Sciences,China(No.23SH14)。
文摘In this study,a novel polysaccharide GPA-G 2-H was derived from ginseng.Furthermore,the coherent study of its structural characteristics,fermented characteristics in vitro,as well as antioxidant mechanism of fermented product FGPA-G 2-H on Aβ25-35-induced PC 12 cells were explored.The structure of GPA-G 2-H was determined by means of zeta potential analysis,FTIR,HPLC,XRD,GC-MS and NMR.The backbone of GPA-G 2-H was mainly composed of→4)-α-D-Glcp-(1→with branches substituted at O-3.Notably,GPA-G 2-H was degraded by intestinal microbiota in vitro with total sugar content and pH value decreasing,and short-chain fatty acids(SCFAs)increasing.Moreover,GPA-G 2-H significantly promoted the proliferation of Lactobacillus,Muribaculaceae and Weissella,thereby making positive alterations in intestinal microbiota composition.Additionally,FGPA-G 2-H activated the Nrf 2/HO-1 signaling pathway,enhanced HO-1,NQO 1,SOD and GSH-Px,while inhabited Keap 1,MDA and LDH,which alleviated Aβ-induced oxidative stress in PC 12 cells.These provide a solid theoretical basis for the further development of ginseng polysaccharides as functional food and antioxidant drugs.
文摘Two Co(Ⅱ)and Ni(Ⅱ)complexes were synthesized by synergistic coordination of 3,3-diphenylpropionic acid(HDPA)and 2,2′-bipyridylamine(PAm).The structures of complexes[Co(DPA)_(2)(PAm)]·2H_(2)O(1)and[Ni(DPA)_(2)(PAm)]·2H_(2)O(2)were determined by single-crystal X-ray diffraction,IR spectroscopy,and powder X-ray diffraction.Hirshfeld surface analysis provided quantitative insights into the intermolecular interactions within the complexes,while molecular docking studies elucidated their binding modes and affinities toward urease.Furthermore,the biological activities of both complexes were systematically evaluated through a range of assays,including DNA binding,urease inhibition,antibacterial activity,and in vitro cytotoxicity against cancer cells.Both complexes exhibited binding affinity for DNA and displayed notable urease inhibitory activity.Under in vitro conditions,both complexes showed appreciable cytotoxicity toward HepG2 cells with efficacy comparable to clinically used platinumbased anticancer agents.CCDC:2479943,1;2479944,2.
基金National Natural Science Foundation of China(32201491)Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-1101-02”.
文摘Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.
基金supported by the National Natural Science Foundation of China(Grant Nos.12432005 and 12472116)the Fundamental Research Funds for the Central Universities(DUTZD25240).
文摘Conformal truss-like lattice structures face significant manufacturability challenges in additive manufac-turing due to overhang angle limitations.To address this problem,we propose a novel angle-constrained optimization method grounded in the global adjustment of nodal coordinates.First,a build direction is selected to minimize the number of violating struts.Then,an angular-constraint matrix is assembled from strut direction vectors,and analytical sensitivities with respect to nodal coordinates are derived to enable efficient constrained optimization under nonlinear angular inequality constraints.Numerical studies on two complex curved-surface lattices demonstrate that all overhang violations are eliminated while only minor changes are induced in global stiffness and strength.In particular,the maximum displacement of an ergonomic insole varies by only 2.87%after optimization.The results confirm the method’s versatility and engineering robustness,providing a practical approach for additive manufacturing-oriented lattice structure design.
基金Doctoral Startup Fund(20192066,20212028)Laijin Excellent Doctoral Fund(20202021)+1 种基金Scientific and Technological Innovation of Colleges and Universities in Shanxi Province(2020L0342)Fundamental Research Program of Shanxi Province(202303021222178)。
文摘SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Key R&D Program of China(Grant No.2019YFC1509703)the Tianjin Science and Technology Program Project(Grant No.23YFYSHZ00130)。
文摘Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.
基金National Natural Science Foundation of China(U22A20191)。
文摘Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.
