Strategically coupling nanoparticle hybrids and internal thermosensitive molecular switches establishes an innovative paradigm for constructing micro/nanoscale-reconfigurable robots,facilitating energyefficient CO_(2)...Strategically coupling nanoparticle hybrids and internal thermosensitive molecular switches establishes an innovative paradigm for constructing micro/nanoscale-reconfigurable robots,facilitating energyefficient CO_(2) management in life-support systems of confined space.Here,a micro/nano-reconfigurable robot is constructed from the CO_(2) molecular hunters,temperature-sensitive molecular switch,solar photothermal conversion,and magnetically-driven function engines.The molecular hunters within the molecular extension state can capture 6.19 mmol g^(−1) of CO_(2) to form carbamic acid and ammonium bicarbonate.Interestingly,the molecular switch of the robot activates a molecular curling state that facilitates CO_(2) release through nano-reconfiguration,which is mediated by the temperature-sensitive curling of Pluronic F127 molecular chains during the photothermal desorption.Nano-reconfiguration of robot alters the amino microenvironment,including increasing surface electrostatic potential of the amino group and decreasing overall lowest unoccupied molecular orbital energy level.This weakened the nucleophilic attack ability of the amino group toward the adsorption product derivatives,thereby inhibiting the side reactions that generate hard-to-decompose urea structures,achieving the lowest regeneration temperature of 55℃ reported to date.The engine of the robot possesses non-contact magnetically-driven micro-reconfiguration capability to achieve efficient photothermal regeneration while avoiding local overheating.Notably,the robot successfully prolonged the survival time of mice in the sealed container by up to 54.61%,effectively addressing the issue of carbon suffocation in confined spaces.This work significantly enhances life-support systems for deep-space exploration,while stimulating innovations in sustainable carbon management technologies for terrestrial extreme environments.展开更多
To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding...To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding SiC nano-particles into electrolyte during MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM） and X-ray diffraction （XRD）,respectively.Furthermore,the corrosion performance of the coatings was evaluated via a three-electrode system in a 3.5 wt pct NaCl solution.From the obtained morphology of alumina coatings,it was believed that the Al2O3 coatings embedded with SiC nano-particles were formed.The electrochemical impedance spectroscopy （EIS） plots and potentiodynamic polarization plots of the Al2O3 coatings with and without SiC nano-particles at different current densities reveal that the Al2O3 coatings with SiC nano-particles formed at 10 A/dm 2 showed the better corrosion resistance than the other coatings produced at 5 and 7 A/dm 2.展开更多
To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 H...To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 Hz,700 Hz,and 900 Hz） were produced during the MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM）,field emission scanning electron microscopy （FESEM）,and X-ray diffraction （XRD）.The surface roughness of the coatings was characterized by confocal laser scanning microscopy （CLSM）.Simultaneously,the tribological properties of the composite coatings were evaluated by using a universal materials tester （UMT）.The results shows that the wear resistance of the ceramic coatings with SiC nano-particles was improved significantly compared to the ceramic coatings without SiC nano-particles.Furthermore,the composite coating formed at current frequency 900 Hz showed the better wear resistance than the others.展开更多
CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD)...CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD),micro-hardness tester,and heat treatment furnace were employed to investigate their morphologies,phases,micro-hardness and thermal shock resistance,compared with the coating without nanoparticles added.The results showed that the microstructure and properties of the coatings with the addition ...展开更多
In low carbon steels, dissolution and precipitation of the second phases such as carbides and nitrides during annealing cycles can affect the final structure and properties of the materials. The interaction of above p...In low carbon steels, dissolution and precipitation of the second phases such as carbides and nitrides during annealing cycles can affect the final structure and properties of the materials. The interaction of above processes depends on parameters such as reheating temperature, heating rate, annealing temperature, soaking time and finishing temperature in hot rolling stage before cold rolling. The effects of heating rate and annealing temperature on the microstructure and hardness were investigated. Two heating rates for annealing temperatures of 550, 610 and 720℃ were applied on cold-rolled specimens and St-14 low carbon steel, which were immediately quenched after isothermal annealing. The intercept method was used tO measure average grain sizes. However, resulted microstructures are dif- ferent for the two heating rates. While pancaked structures were observed in specimens annealed with low heating rate, in samples annealed with high heating rate, equiaxed microstructures were observed. Vickers micro-hardness values decreased at all temperatures, which were more significant at higher temperatures. At longer annealing time, signs of increase of hardness values were detected. All results and observations consistently suggest that a precipitati- on process has occurred concurrently with restoration processes during annealing. In addition, the energy dispersive spectroscopy analysis resulted from transmission electron microscopic micrographs have proved that the nano particles precipitated in grain boundaries are AlN.展开更多
The tribological properties of Sialon sliding against AISI52100 steel ball under the lubrication of solid particle additives, as micro-borate particle and nano-PbS particle, were evaluated by a SRV ball-on-disc test r...The tribological properties of Sialon sliding against AISI52100 steel ball under the lubrication of solid particle additives, as micro-borate particle and nano-PbS particle, were evaluated by a SRV ball-on-disc test rig. The chemical composition of the worn surface was characterized by X-ray photoelectron spectroscopy (XPS). The morphologies of the worn surfaces of Sialon were analyzed by scanning electron microscopy (SEM). The results show that the particles can reduce the friction coefficient of the pairs and the wear volume of Sialon significantly. The wear resistance of micro-borate is superior to that of nano-PbS while the friction-reducing ability of PbS is better than that of borate. According to the XPS and SEM results, the wear resistance of PbS is mainly depended on the tribochemical film mainly composed of PbSO 4, which deposited on the worn surface with good bonding strength. No tribochemical reaction or deposited film was detected or observed on the worn surface of Sialon under the lubrication of borate, indicating that the possible physically deposited film generated from micro particle can also greatly reduce the wear volume of Sialon, though the friction reducing ability of which is inferior to that of nano PbS particle.展开更多
La0.8Ba0.2MnO3 nano-particles were synthesized by sol-gel process, and the crystal structure and morphology were characterized by XRD and SEM, respectively. The complex permittivity and permeability were determined by...La0.8Ba0.2MnO3 nano-particles were synthesized by sol-gel process, and the crystal structure and morphology were characterized by XRD and SEM, respectively. The complex permittivity and permeability were determined by microwave vector network analyzer in the frequency range of 2-18 GHz. The relationship between reflection coefficient and microwave frequency of La0.8Ba0.2 MnO3 was calculated based on measured data. The results show that the average diameter of La0.8Ba0.2MnO3 crystal powders is about 80 nm and the crystal structure is perovskite when being calcined at 800 ℃ for 2 h. The microwave absorbing peak is 13 dB at 6.7 GHz and the effective absorbing bandwidth above 10 dB reaches 1.8 GHz for the sample with the thickness of 2.6 mm. The microwave absorption can be attributed to both the dielectric loss and the magnetic loss from the loss tangents of the sample, but the former is greater than the latter.展开更多
The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. ...The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. TiH 2 coated with nano TiO 2 particles, in which there is an oxidation film on its surface, shown in the experiments, will obviously achieve good effects on releasing hydrogen slowly in high temperature. There are different structures and properties of TiH 2 coated by nano TiO 2 particles prepared in different ways in high temperature, which can influence on releasing hydrogen.展开更多
The paper presents the results of studies surface microrelief, frequency-temperature characteristics of the imaginary part of the dielectric permittivity and dielectric loss of PE+TlInSe2 composite materials in 25。C ...The paper presents the results of studies surface microrelief, frequency-temperature characteristics of the imaginary part of the dielectric permittivity and dielectric loss of PE+TlInSe2 composite materials in 25。C - 150。C temperature and 25 Hz - 1 MHz frequency range before and after application of the aluminum nano-particles with a size of 50 nm. The change in the amount of semicon-ductor filler TlInSe2 and aluminum nano-particles changes the state of the surface and the frequency-temperature characteristics of composite materials PE+xvol.%TlInSe2, which allows to obtain composites with the desired dielectric permittivity and dielectric loss.展开更多
SnO2 nano particles with various Pd-doping concentrations were prepared using a template-free hydrothermal method.The effects of Pd doping on the crystal structure,morphology,microstructure,thermal stability and surfa...SnO2 nano particles with various Pd-doping concentrations were prepared using a template-free hydrothermal method.The effects of Pd doping on the crystal structure,morphology,microstructure,thermal stability and surface chemistry of these nano particles were characterized by transmission electron microscope,X-ray diffractometer and X-ray photoelectron spectroscope respectively.It was observed that Pd-doping had little effect on the grain sizes of the obtained SnO2 nano particles during the hydrothermal route.During thermal annealing,Pd-doping could restrain the growth of grain sizes below 500℃ while the grain growth was promoted when the temperature increased to above 700℃.XPS results revealed that Pd existed in three chemical states in the as-synthesized sample as Pd^0,Pd^2＋ and Pd^4＋,respectively.Pd^4＋ was the main state which was responsible for improving the gas-sensing property.The optimal Pd-doping concentration for better gas-sensing property and thermal stability was 2.0%-2.5% （mole fraction）.展开更多
In this study, the performance of stable nanofluid containing SiO2 nanoparticles dispersed and stabilized in high salinity brine for asphaltene inhibition in dynamic condition is evaluated. In the first stage of this ...In this study, the performance of stable nanofluid containing SiO2 nanoparticles dispersed and stabilized in high salinity brine for asphaltene inhibition in dynamic condition is evaluated. In the first stage of this work, the stability of silica nanoparticles in different range of water salinity(0–100000 mg·L-1) is investigated. Next, stable nanofluid containing highest salinity is selected as asphaltene inhibitor agent to inject into the damaged core sample. The estimated values of oil recovery for base case, after damage process and after inhibition of asphaltene precipitation using nanofluid are 51.6%, 36.1% and 46.7%, respectively. The results showed the reduction in core damage after using nanofluid. In addition, the relative permeability curves are plotted for the base case, after damage process and also after inhibition of asphaltene precipitation using nanofluid. Comparison of relative permeability curves shows, relative permeability of oil phase decreased after damage process as compared with the base case. But after using nanofluid the oil relative permeability curve has shifted to the right and effective permeability of oil phase has been improved.展开更多
The following article has been retracted due to the fact that it cannot be accepted by the author as a journal publication. The Editorial Board takes a very strong respect to the author’s situation on this matter. Th...The following article has been retracted due to the fact that it cannot be accepted by the author as a journal publication. The Editorial Board takes a very strong respect to the author’s situation on this matter. This paper published in Journal of Biosciences and Medicines Vol.2 No.2, April 2014, has been removed from this site.展开更多
As a potential application of titanium-oxide nanoparticles, it is extremely important to investigate a detailed picture of the surface and interior structural properties of nanocrystalline materials, such as rutile an...As a potential application of titanium-oxide nanoparticles, it is extremely important to investigate a detailed picture of the surface and interior structural properties of nanocrystalline materials, such as rutile and anatase with diameters 7.0 and 4.5nm, respectively. X-ray absorption spectroscopy has been used to identify the local Ti environment and related electronic structure. We combine the experimental results at the Ti edge in both bulk and nano-crystals to determine the lattice distortion in terms of differently characteristic preedge features and the variation in the multiple-scattering region of X-ray absorption near-edge structure (XANES) spectra. The relationship between the transition peaks and the surface-to volume ratio is also discussed.展开更多
In this work,we report that the thermoelectric properties of Bi（0.52）Sb（1.48）Te3alloy can be enhanced by being composited with Mn Te nano particles（NPs）through a combined ball milling and spark plasma sintering...In this work,we report that the thermoelectric properties of Bi（0.52）Sb（1.48）Te3alloy can be enhanced by being composited with Mn Te nano particles（NPs）through a combined ball milling and spark plasma sintering（SPS）process.The addition of Mn Te into the host can synergistically reduce the lattice thermal conductivity by increasing the interface phononscattering between Bi（0.52）Sb（1.48）Te3 and MnTe NPs,and enhance the electrical transport properties by optimizing the hole concentration through partial Mn^2＋ acceptor doping on the Bi^3＋ sites of the host lattice.It is observed that the lattice thermal conductivity decreases with increasing the percentage of Mn Te and milling time in a temperature range from 300 Kto 500 K,which is consistent with the increasing of interfaces.Meanwhile,the bipolar effect is constrained to high temperatures,which results in the figure of merit z T peak shifting toward higher temperature and broadening the z T curves.The engineering z T is obtained to be 20%higher than that of the pristine sample for the 2-mol%Mn Te-added composite at a temperature gradient of 200 K when the cold end temperature is set to be 300 K.This result indicates that the thermoelectric performance of Bi0.52Sb1.48Te3 can be considerably enhanced by being composited with Mn Te NPs.展开更多
Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs an...Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown.Here,we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats,pacifiers,and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility(IVBA)of Ag and Zn in the articles.Nearly 89%articles had a mixture of Ag-and Zn-containing NPs and the teethers had relatively high Ag and Zn contents(up to 501 and 254μg/g,respectively).Steam disinfection caused rubber decomposition into micro(nano)plastics(0.54-15.7μm)and NP release from the interior of bulk rubber and micro-sized plastics,thus enhancing the IVBA of Ag and Zn by up to 5.5 times.The findings provide insights into mechanisms for NP release by steam disinfection.Though oral exposure risk assessment suggested low health concerns on individual metal release,our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.展开更多
Zinc substituted cobalt ferrite nanoparticles (CoxZn1-xFe2O4, with x = 0.0, 0.2, 0.4, 0.8 and 1.0) were prepared via sol-gel route and the effect of zinc concentration on saturation magnetization and lattice parameter...Zinc substituted cobalt ferrite nanoparticles (CoxZn1-xFe2O4, with x = 0.0, 0.2, 0.4, 0.8 and 1.0) were prepared via sol-gel route and the effect of zinc concentration on saturation magnetization and lattice parameter were investigated. The particle sizes of the as obtained samples were found to be ~10 nm which increases upto ~92 nm on annealing at 1000oC. The frequency bands near 564-588 cm-1 and 425-442 cm-1 are assigned to the tetrahedral and octahedral clusters which confirm the presence of M-O stretching band in ferrites. The unit cell parameter ‘a’ increases linearly with increasing concentration of zinc due to larger ionic radii of Zn2+ ion . It was found that this substitution allows tunable changes in the magnetic properties of cobalt ferrite. Interestingly, saturation magnetization first increases upto x = 0.4 and then decreases for higher Zn substitution, thus tunable changes in magnetic properties of cobalt ferrite are possible. Source of such behaviour could be the variation of exchange interaction between the tetrahedral and the octahedral sites.展开更多
A seeding strategy was developed in the preparation of cyclotetramethylenetetranitramine(HMX)explosive micro-particles by solvent-antisolvent method, to control their polymorphs from dangerous gamma(y) type to the des...A seeding strategy was developed in the preparation of cyclotetramethylenetetranitramine(HMX)explosive micro-particles by solvent-antisolvent method, to control their polymorphs from dangerous gamma(y) type to the desired and standard beta(β) form with the size distribution of <10.0 μm, by using a low concentration of β-HMX fine particles as micro-seed in the antisolvent medium. All products were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), and dynamic light scattering particle size analyzer. In the next step, the effective factors on the sizes and morphologies of micro-particles in the presence and absence of two soft templates of poly(ethylene glycol)-400(PEG-400) polymer and coconut fatty acid diethanolamide(lauramide) surfactant were investigated. The results of experiments showed that using of water-soluble PEG-400 in the low antisolvent temperatures leads to the production of very spherical particles. Also non-ionic surfactant of lauramide, direct the crystal growth to needle-like structures. The advantages of this method are its capability for the simple production of β-HMX micro-particles in the large scale production process, with the various crystal structures and particles size distributions.展开更多
The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is nec...The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is necessary to present a model to describe the combustion process in these technologies. Recirculation phenomenon is evaluated by entering the exhausted heat from the post flam zone into the preheat zone. In this work, for modeling of random situation at the flame front, the source term in the equation of energy was modeled considering random situation for volatizing of particles in preheat zone. The comparison of obtained results from the proposed model by experimental data regards that the random model has a better agreement with experimental data than non-random model. Also, according to the results obtained by this model, wall temperature affects the amount of heat recirculation directly and higher values of wall temperature will lead to higher amounts of burning velocity and flame temperature.展开更多
Nd-Fe-B permanent magnets with a small amount of Cu nano-particles doping have been prepared by con-ventional sintered method. Effects of Cu content on magnetic properties, corrosion resistance, and oxidation properti...Nd-Fe-B permanent magnets with a small amount of Cu nano-particles doping have been prepared by con-ventional sintered method. Effects of Cu content on magnetic properties, corrosion resistance, and oxidation properties of the magnets have been studied. It shows that the coercivity rises gradually, while the remanence decreases simultaneously with increasing Cu doping amount. Microstructure observation reveals that Cu ele- ment enriches mainly the Nd-rich phase. Autoclave test results show that the corrosion rate of the magnets decreases with increasing Cu content. After oxidation, the maximum energy product loss of the magnets with 0 and 0.2 wt% Cu nano-particles doping are 6.13% and 0.g9%, respectively. Therefore, it is concluded that Cu nano-particles doping is a promising way to enhance the coercivity and corrosion resistance of sintered Nd-Fe-B magnets.展开更多
基金supported by the National Natural Science Foundation of China(22168008,22378085)the Guangxi Natural Science Foundation(2024GXNSFDA010053)+1 种基金the Technology Development Project of Guangxi Bossco Environmental Protection Technology Co.,Ltd(202100039)Innovation Project of Guangxi Graduate Education(YCBZ2024065).
文摘Strategically coupling nanoparticle hybrids and internal thermosensitive molecular switches establishes an innovative paradigm for constructing micro/nanoscale-reconfigurable robots,facilitating energyefficient CO_(2) management in life-support systems of confined space.Here,a micro/nano-reconfigurable robot is constructed from the CO_(2) molecular hunters,temperature-sensitive molecular switch,solar photothermal conversion,and magnetically-driven function engines.The molecular hunters within the molecular extension state can capture 6.19 mmol g^(−1) of CO_(2) to form carbamic acid and ammonium bicarbonate.Interestingly,the molecular switch of the robot activates a molecular curling state that facilitates CO_(2) release through nano-reconfiguration,which is mediated by the temperature-sensitive curling of Pluronic F127 molecular chains during the photothermal desorption.Nano-reconfiguration of robot alters the amino microenvironment,including increasing surface electrostatic potential of the amino group and decreasing overall lowest unoccupied molecular orbital energy level.This weakened the nucleophilic attack ability of the amino group toward the adsorption product derivatives,thereby inhibiting the side reactions that generate hard-to-decompose urea structures,achieving the lowest regeneration temperature of 55℃ reported to date.The engine of the robot possesses non-contact magnetically-driven micro-reconfiguration capability to achieve efficient photothermal regeneration while avoiding local overheating.Notably,the robot successfully prolonged the survival time of mice in the sealed container by up to 54.61%,effectively addressing the issue of carbon suffocation in confined spaces.This work significantly enhances life-support systems for deep-space exploration,while stimulating innovations in sustainable carbon management technologies for terrestrial extreme environments.
基金supported by the Ministry of Education of the People's Republic of China (Contract No. 210051)
文摘To improve the surface corrosion resistance of the alumina films fabricated by micro-arc oxidation （MAO）,Al2O3 coatings at different current densities （5,7 and 10 A/dm 2） were produced on aluminum alloys by adding SiC nano-particles into electrolyte during MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM） and X-ray diffraction （XRD）,respectively.Furthermore,the corrosion performance of the coatings was evaluated via a three-electrode system in a 3.5 wt pct NaCl solution.From the obtained morphology of alumina coatings,it was believed that the Al2O3 coatings embedded with SiC nano-particles were formed.The electrochemical impedance spectroscopy （EIS） plots and potentiodynamic polarization plots of the Al2O3 coatings with and without SiC nano-particles at different current densities reveal that the Al2O3 coatings with SiC nano-particles formed at 10 A/dm 2 showed the better corrosion resistance than the other coatings produced at 5 and 7 A/dm 2.
基金Jilin Provincial Science & Technology Department for supporting this research under contract number 20080505
文摘To improve the surface wear resistance of the ceramic coating fabricated by micro-arc oxidation （MAO） on AZ91D magnesium alloy,ceramic coatings embedded with SiC nano-particles at different current frequency （500 Hz,700 Hz,and 900 Hz） were produced during the MAO process.The morphology and phase composition of the coatings were investigated by scanning electron microscopy （SEM）,field emission scanning electron microscopy （FESEM）,and X-ray diffraction （XRD）.The surface roughness of the coatings was characterized by confocal laser scanning microscopy （CLSM）.Simultaneously,the tribological properties of the composite coatings were evaluated by using a universal materials tester （UMT）.The results shows that the wear resistance of the ceramic coatings with SiC nano-particles was improved significantly compared to the ceramic coatings without SiC nano-particles.Furthermore,the composite coating formed at current frequency 900 Hz showed the better wear resistance than the others.
基金supported by the Doctoral Program of Higher Education of China (20060287019)the Opening Research Fund of Jiangsu Key Laboratory of Tribology of China (kjsmcx07001)Graduate Innovation Foundation of Jiangsu Province of China (CX08B-039Z)
文摘CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD),micro-hardness tester,and heat treatment furnace were employed to investigate their morphologies,phases,micro-hardness and thermal shock resistance,compared with the coating without nanoparticles added.The results showed that the microstructure and properties of the coatings with the addition ...
文摘In low carbon steels, dissolution and precipitation of the second phases such as carbides and nitrides during annealing cycles can affect the final structure and properties of the materials. The interaction of above processes depends on parameters such as reheating temperature, heating rate, annealing temperature, soaking time and finishing temperature in hot rolling stage before cold rolling. The effects of heating rate and annealing temperature on the microstructure and hardness were investigated. Two heating rates for annealing temperatures of 550, 610 and 720℃ were applied on cold-rolled specimens and St-14 low carbon steel, which were immediately quenched after isothermal annealing. The intercept method was used tO measure average grain sizes. However, resulted microstructures are dif- ferent for the two heating rates. While pancaked structures were observed in specimens annealed with low heating rate, in samples annealed with high heating rate, equiaxed microstructures were observed. Vickers micro-hardness values decreased at all temperatures, which were more significant at higher temperatures. At longer annealing time, signs of increase of hardness values were detected. All results and observations consistently suggest that a precipitati- on process has occurred concurrently with restoration processes during annealing. In addition, the energy dispersive spectroscopy analysis resulted from transmission electron microscopic micrographs have proved that the nano particles precipitated in grain boundaries are AlN.
基金FundedbytheNationalNaturalScienceFoundationofChi na (No .30 30 0 0 78)
文摘The tribological properties of Sialon sliding against AISI52100 steel ball under the lubrication of solid particle additives, as micro-borate particle and nano-PbS particle, were evaluated by a SRV ball-on-disc test rig. The chemical composition of the worn surface was characterized by X-ray photoelectron spectroscopy (XPS). The morphologies of the worn surfaces of Sialon were analyzed by scanning electron microscopy (SEM). The results show that the particles can reduce the friction coefficient of the pairs and the wear volume of Sialon significantly. The wear resistance of micro-borate is superior to that of nano-PbS while the friction-reducing ability of PbS is better than that of borate. According to the XPS and SEM results, the wear resistance of PbS is mainly depended on the tribochemical film mainly composed of PbSO 4, which deposited on the worn surface with good bonding strength. No tribochemical reaction or deposited film was detected or observed on the worn surface of Sialon under the lubrication of borate, indicating that the possible physically deposited film generated from micro particle can also greatly reduce the wear volume of Sialon, though the friction reducing ability of which is inferior to that of nano PbS particle.
基金Project(05JT1034) supported by the Planned Item of Science and Technology of Hunan Province, China
文摘La0.8Ba0.2MnO3 nano-particles were synthesized by sol-gel process, and the crystal structure and morphology were characterized by XRD and SEM, respectively. The complex permittivity and permeability were determined by microwave vector network analyzer in the frequency range of 2-18 GHz. The relationship between reflection coefficient and microwave frequency of La0.8Ba0.2 MnO3 was calculated based on measured data. The results show that the average diameter of La0.8Ba0.2MnO3 crystal powders is about 80 nm and the crystal structure is perovskite when being calcined at 800 ℃ for 2 h. The microwave absorbing peak is 13 dB at 6.7 GHz and the effective absorbing bandwidth above 10 dB reaches 1.8 GHz for the sample with the thickness of 2.6 mm. The microwave absorption can be attributed to both the dielectric loss and the magnetic loss from the loss tangents of the sample, but the former is greater than the latter.
文摘The surface of Titanium Hydride (TiH 2) is coated by Nano Titanium Dioxide (TiO 2) particles prepared in both of methods of hydrolysis reaction of Ti(OC 4H 9) 4 and base precipitation reaction of Ti(SO 4) 2. TiH 2 coated with nano TiO 2 particles, in which there is an oxidation film on its surface, shown in the experiments, will obviously achieve good effects on releasing hydrogen slowly in high temperature. There are different structures and properties of TiH 2 coated by nano TiO 2 particles prepared in different ways in high temperature, which can influence on releasing hydrogen.
文摘The paper presents the results of studies surface microrelief, frequency-temperature characteristics of the imaginary part of the dielectric permittivity and dielectric loss of PE+TlInSe2 composite materials in 25。C - 150。C temperature and 25 Hz - 1 MHz frequency range before and after application of the aluminum nano-particles with a size of 50 nm. The change in the amount of semicon-ductor filler TlInSe2 and aluminum nano-particles changes the state of the surface and the frequency-temperature characteristics of composite materials PE+xvol.%TlInSe2, which allows to obtain composites with the desired dielectric permittivity and dielectric loss.
基金Projects(60806032,20975107) supported by the National Natural Science Foundation of ChinaProject(2009R10064) supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars of Education Ministry,China+2 种基金 Project(2009R10064) supported by "Qianjiang Talent Program"Projects(2009A610058,2009A610030) supported by the Ningbo Natural Science Foundation,ChinaProject supported by K.C.WONG Magna Fund in Ningbo University,China
文摘SnO2 nano particles with various Pd-doping concentrations were prepared using a template-free hydrothermal method.The effects of Pd doping on the crystal structure,morphology,microstructure,thermal stability and surface chemistry of these nano particles were characterized by transmission electron microscope,X-ray diffractometer and X-ray photoelectron spectroscope respectively.It was observed that Pd-doping had little effect on the grain sizes of the obtained SnO2 nano particles during the hydrothermal route.During thermal annealing,Pd-doping could restrain the growth of grain sizes below 500℃ while the grain growth was promoted when the temperature increased to above 700℃.XPS results revealed that Pd existed in three chemical states in the as-synthesized sample as Pd^0,Pd^2＋ and Pd^4＋,respectively.Pd^4＋ was the main state which was responsible for improving the gas-sensing property.The optimal Pd-doping concentration for better gas-sensing property and thermal stability was 2.0%-2.5% （mole fraction）.
基金the support of the Department of Petroleum Engineering, Amirkabir University of Technology during this study
文摘In this study, the performance of stable nanofluid containing SiO2 nanoparticles dispersed and stabilized in high salinity brine for asphaltene inhibition in dynamic condition is evaluated. In the first stage of this work, the stability of silica nanoparticles in different range of water salinity(0–100000 mg·L-1) is investigated. Next, stable nanofluid containing highest salinity is selected as asphaltene inhibitor agent to inject into the damaged core sample. The estimated values of oil recovery for base case, after damage process and after inhibition of asphaltene precipitation using nanofluid are 51.6%, 36.1% and 46.7%, respectively. The results showed the reduction in core damage after using nanofluid. In addition, the relative permeability curves are plotted for the base case, after damage process and also after inhibition of asphaltene precipitation using nanofluid. Comparison of relative permeability curves shows, relative permeability of oil phase decreased after damage process as compared with the base case. But after using nanofluid the oil relative permeability curve has shifted to the right and effective permeability of oil phase has been improved.
文摘The following article has been retracted due to the fact that it cannot be accepted by the author as a journal publication. The Editorial Board takes a very strong respect to the author’s situation on this matter. This paper published in Journal of Biosciences and Medicines Vol.2 No.2, April 2014, has been removed from this site.
基金One of us (Z.Y. Wu) was supported by 100-Talent Research Program of The Chinese Academy of Sciences. One of the authors (K. Ibrahim) is grateful to the National Natural Science Foundation of China (NSFC) for financial support (Grant No. 10074063) The
文摘As a potential application of titanium-oxide nanoparticles, it is extremely important to investigate a detailed picture of the surface and interior structural properties of nanocrystalline materials, such as rutile and anatase with diameters 7.0 and 4.5nm, respectively. X-ray absorption spectroscopy has been used to identify the local Ti environment and related electronic structure. We combine the experimental results at the Ti edge in both bulk and nano-crystals to determine the lattice distortion in terms of differently characteristic preedge features and the variation in the multiple-scattering region of X-ray absorption near-edge structure (XANES) spectra. The relationship between the transition peaks and the surface-to volume ratio is also discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U1601213 and 51472052)the Funds from Institute of Physics,Chinese Academy of Sciences
文摘In this work,we report that the thermoelectric properties of Bi（0.52）Sb（1.48）Te3alloy can be enhanced by being composited with Mn Te nano particles（NPs）through a combined ball milling and spark plasma sintering（SPS）process.The addition of Mn Te into the host can synergistically reduce the lattice thermal conductivity by increasing the interface phononscattering between Bi（0.52）Sb（1.48）Te3 and MnTe NPs,and enhance the electrical transport properties by optimizing the hole concentration through partial Mn^2＋ acceptor doping on the Bi^3＋ sites of the host lattice.It is observed that the lattice thermal conductivity decreases with increasing the percentage of Mn Te and milling time in a temperature range from 300 Kto 500 K,which is consistent with the increasing of interfaces.Meanwhile,the bipolar effect is constrained to high temperatures,which results in the figure of merit z T peak shifting toward higher temperature and broadening the z T curves.The engineering z T is obtained to be 20%higher than that of the pristine sample for the 2-mol%Mn Te-added composite at a temperature gradient of 200 K when the cold end temperature is set to be 300 K.This result indicates that the thermoelectric performance of Bi0.52Sb1.48Te3 can be considerably enhanced by being composited with Mn Te NPs.
基金supported by the Key-Area Research and Development Program of Guangdong Province (No.2020B1111380003)the National Natural Science Foundation of China (Nos.42177377 and 31861133003)。
文摘Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles(NPs)directly exposed to infants and young children.However,the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown.Here,we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats,pacifiers,and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility(IVBA)of Ag and Zn in the articles.Nearly 89%articles had a mixture of Ag-and Zn-containing NPs and the teethers had relatively high Ag and Zn contents(up to 501 and 254μg/g,respectively).Steam disinfection caused rubber decomposition into micro(nano)plastics(0.54-15.7μm)and NP release from the interior of bulk rubber and micro-sized plastics,thus enhancing the IVBA of Ag and Zn by up to 5.5 times.The findings provide insights into mechanisms for NP release by steam disinfection.Though oral exposure risk assessment suggested low health concerns on individual metal release,our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.
文摘Zinc substituted cobalt ferrite nanoparticles (CoxZn1-xFe2O4, with x = 0.0, 0.2, 0.4, 0.8 and 1.0) were prepared via sol-gel route and the effect of zinc concentration on saturation magnetization and lattice parameter were investigated. The particle sizes of the as obtained samples were found to be ~10 nm which increases upto ~92 nm on annealing at 1000oC. The frequency bands near 564-588 cm-1 and 425-442 cm-1 are assigned to the tetrahedral and octahedral clusters which confirm the presence of M-O stretching band in ferrites. The unit cell parameter ‘a’ increases linearly with increasing concentration of zinc due to larger ionic radii of Zn2+ ion . It was found that this substitution allows tunable changes in the magnetic properties of cobalt ferrite. Interestingly, saturation magnetization first increases upto x = 0.4 and then decreases for higher Zn substitution, thus tunable changes in magnetic properties of cobalt ferrite are possible. Source of such behaviour could be the variation of exchange interaction between the tetrahedral and the octahedral sites.
基金financial support of this work by Malek-ashtar University of Technology(I.R.Iran)Grant No.1395064
文摘A seeding strategy was developed in the preparation of cyclotetramethylenetetranitramine(HMX)explosive micro-particles by solvent-antisolvent method, to control their polymorphs from dangerous gamma(y) type to the desired and standard beta(β) form with the size distribution of <10.0 μm, by using a low concentration of β-HMX fine particles as micro-seed in the antisolvent medium. All products were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), and dynamic light scattering particle size analyzer. In the next step, the effective factors on the sizes and morphologies of micro-particles in the presence and absence of two soft templates of poly(ethylene glycol)-400(PEG-400) polymer and coconut fatty acid diethanolamide(lauramide) surfactant were investigated. The results of experiments showed that using of water-soluble PEG-400 in the low antisolvent temperatures leads to the production of very spherical particles. Also non-ionic surfactant of lauramide, direct the crystal growth to needle-like structures. The advantages of this method are its capability for the simple production of β-HMX micro-particles in the large scale production process, with the various crystal structures and particles size distributions.
文摘The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is necessary to present a model to describe the combustion process in these technologies. Recirculation phenomenon is evaluated by entering the exhausted heat from the post flam zone into the preheat zone. In this work, for modeling of random situation at the flame front, the source term in the equation of energy was modeled considering random situation for volatizing of particles in preheat zone. The comparison of obtained results from the proposed model by experimental data regards that the random model has a better agreement with experimental data than non-random model. Also, according to the results obtained by this model, wall temperature affects the amount of heat recirculation directly and higher values of wall temperature will lead to higher amounts of burning velocity and flame temperature.
基金supported by the National Natural Science Foundation of China (No. 51001002)the Research Fund for the Doctoral Program of Higher Education of China (No. 20091103120024)+2 种基金the National High Technology Research and Development Program of China (No.2012AA063201)the Key Program of Science and Technology Development Project of Beijing Municipal Education Commission (No. KZ201110005007)211 Project of Beijing University of Technology and Rixin Talents of Beijing University of Technology
文摘Nd-Fe-B permanent magnets with a small amount of Cu nano-particles doping have been prepared by con-ventional sintered method. Effects of Cu content on magnetic properties, corrosion resistance, and oxidation properties of the magnets have been studied. It shows that the coercivity rises gradually, while the remanence decreases simultaneously with increasing Cu doping amount. Microstructure observation reveals that Cu ele- ment enriches mainly the Nd-rich phase. Autoclave test results show that the corrosion rate of the magnets decreases with increasing Cu content. After oxidation, the maximum energy product loss of the magnets with 0 and 0.2 wt% Cu nano-particles doping are 6.13% and 0.g9%, respectively. Therefore, it is concluded that Cu nano-particles doping is a promising way to enhance the coercivity and corrosion resistance of sintered Nd-Fe-B magnets.
