In a laser butt joint welding process, it is required that the laser beam focus should be controlled to follow the weld joint path accurately. Small focus wandering off the weld joint may result in insufficient penetr...In a laser butt joint welding process, it is required that the laser beam focus should be controlled to follow the weld joint path accurately. Small focus wandering off the weld joint may result in insufficient penetration or unacceptable welds.Recognition of joint position offset, which describes the deviation between the laser beam focus and the weld joint, is important for adjusting the laser beam focus and obtaining high quality welds. A new method based on the magneto-optical（MO） imaging is applied to measure the micro weld joint whose gap is less than 0.2 mm. The weldments are excited by an external magnetic field, and an MO sensor based on principle of Faraday magneto effect is used to capture the weld joint images. A sequence of MO images which are tested under different magnetic field intensities and different weld joint widths are acquired. By analyzing the MO image characteristics and extracting the weld joint features, the influence of magnetic field intensity and weld joint width on the MO images and detection of weld joint position is observed and summarized.展开更多
An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corros...An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corrosion resistance of the coatings were discussed. Morphology and phase constituents of the MAO coatings produced in electrolyte with different Na2SiO3 concentrations were analyzed by scanning electron microscopy, confocal laser scanning microscopy and X-ray diffraction. Electrochemical tests were conducted to evaluate the corrosion resistance of the coatings. The results show that the corrosion resistance of the coated joints is much better than that without the ceramic coating, and the ceramic coating produced in the electrolyte with Na2SiO3 concentration 20 g/L showed better corrosion resistance than the others.展开更多
Nanoindentation method was adopted to investigate the distribution regularities of micro-mechanical properties of 2219 twin wire welded joints, thus providing the necessary theoretical basis and guidance for joint str...Nanoindentation method was adopted to investigate the distribution regularities of micro-mechanical properties of 2219 twin wire welded joints, thus providing the necessary theoretical basis and guidance for joint strengthening and improvement of welding procedure. Experimental results show that in weld zone, micro-mechanical properties are seriously uneven. Both hardness and elastic modulus distribute as uneven sandwich layers, while micro-mechanical properties in bond area are much more uniform than weld zone;In heat-affected zone of 2219 twin wire welded joint, distribution regularity of hardness is similar to elastic modulus. The average hardness in quenching zone is higher than softening zone, and the average elastic modulus in solid solution zone is slightly higher than softening zone. As far as the whole welded joint is concerned, metal in weld possesses the lowest hardness. For welded specimens without reinforcement, fracture position is the weld when tensioning. While for welded specimens with reinforcement, bond area is the poorest position with joint strength coefficient of 61%. So, it is necessary to strengthen the poor positions--weld and bond area of 2219 twin wire welded joint in order to solve joint weakening of welding this kind of alloy.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.51175095)the Natural Science Foundation of Guangdong Province,China(Grant No.10251009001000001)+1 种基金the Guangdong Provincial Project of Science and Technology Innovation of Discipline Construction,China(Grant No.2013KJCX0063)the Science and Technology Plan Project of Guangzhou City,China(Grant No.1563000554)
文摘In a laser butt joint welding process, it is required that the laser beam focus should be controlled to follow the weld joint path accurately. Small focus wandering off the weld joint may result in insufficient penetration or unacceptable welds.Recognition of joint position offset, which describes the deviation between the laser beam focus and the weld joint, is important for adjusting the laser beam focus and obtaining high quality welds. A new method based on the magneto-optical（MO） imaging is applied to measure the micro weld joint whose gap is less than 0.2 mm. The weldments are excited by an external magnetic field, and an MO sensor based on principle of Faraday magneto effect is used to capture the weld joint images. A sequence of MO images which are tested under different magnetic field intensities and different weld joint widths are acquired. By analyzing the MO image characteristics and extracting the weld joint features, the influence of magnetic field intensity and weld joint width on the MO images and detection of weld joint position is observed and summarized.
基金supported by the Program for New Century Excellent Talents from the Ministry of Education (Grant No. NCET-11-0984)
文摘An attempt has been made to improve the corrosion resistance of friction stir welded joints of 7075 aluminum alloys by micro-arc oxidation（MAO）, and the effects of Na2Si O3 concentration in electrolyte on the corrosion resistance of the coatings were discussed. Morphology and phase constituents of the MAO coatings produced in electrolyte with different Na2SiO3 concentrations were analyzed by scanning electron microscopy, confocal laser scanning microscopy and X-ray diffraction. Electrochemical tests were conducted to evaluate the corrosion resistance of the coatings. The results show that the corrosion resistance of the coated joints is much better than that without the ceramic coating, and the ceramic coating produced in the electrolyte with Na2SiO3 concentration 20 g/L showed better corrosion resistance than the others.
基金The project is supported by Postdoctoral Science Fund of China and Postdoctoral Fund of Heilongjiang Province.
文摘Nanoindentation method was adopted to investigate the distribution regularities of micro-mechanical properties of 2219 twin wire welded joints, thus providing the necessary theoretical basis and guidance for joint strengthening and improvement of welding procedure. Experimental results show that in weld zone, micro-mechanical properties are seriously uneven. Both hardness and elastic modulus distribute as uneven sandwich layers, while micro-mechanical properties in bond area are much more uniform than weld zone;In heat-affected zone of 2219 twin wire welded joint, distribution regularity of hardness is similar to elastic modulus. The average hardness in quenching zone is higher than softening zone, and the average elastic modulus in solid solution zone is slightly higher than softening zone. As far as the whole welded joint is concerned, metal in weld possesses the lowest hardness. For welded specimens without reinforcement, fracture position is the weld when tensioning. While for welded specimens with reinforcement, bond area is the poorest position with joint strength coefficient of 61%. So, it is necessary to strengthen the poor positions--weld and bond area of 2219 twin wire welded joint in order to solve joint weakening of welding this kind of alloy.
