The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analy...The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.展开更多
The relation of mass, stiffness and rate of damping is obtained by using the mechanical analysis of the obstructive vibration system of two dimensions for the design of the obstructive vibration system of more freedom...The relation of mass, stiffness and rate of damping is obtained by using the mechanical analysis of the obstructive vibration system of two dimensions for the design of the obstructive vibration system of more freedom and the micro vibration test bed. The result of stimulational experiment indicates that the isolation of vibration of this system is satisfactory. The design method of vibration can be used as the reference to ultra precision machine tool, super micro orientation machanism and so on.展开更多
True triaxial rockburst experiments with four different unloading rates were performed on four prism specimens of granite sampled from Beishan, China. The damage evolution in the rockburst test was investigated from t...True triaxial rockburst experiments with four different unloading rates were performed on four prism specimens of granite sampled from Beishan, China. The damage evolution in the rockburst test was investigated from two aspects including fracture surface crack and fragment characteristics. The scanning electron microscopy was used to observe the micro crack information on fragment surface. Combing binarization and box counting dimensions, the fractal dimensions of cracks were obtained. Meanwhile,the fragments were collected and a sieving experiment was conducted. We weighed the fragments qualities, counted the amount of fragments and measured the fragments length, width and thickness.Utilizing four methods to calculate damage fractal dimensions of fragments, the trend of fractal value changing with unloading rates can be roughly described. It can be concluded from these experiments that the fractal dimension either for crack or for fragment holds a decreasing trend with the decreasing unloading rate, indicating a reduction of damage level.展开更多
Accurately characterizing the liver's mechanical properties is of paramount importance for disease diagnosis,treatment,surgical prosthetic modeling,and impact injury dummies.However,due to its inherent biological ...Accurately characterizing the liver's mechanical properties is of paramount importance for disease diagnosis,treatment,surgical prosthetic modeling,and impact injury dummies.However,due to its inherent biological soft tissue nature,the characterization of mechanical behavior varies across testing methods and sample types.In this study,we employed transmission electron microscope and Micro CT to observe the morphology of the marginal and center of rat livers and conducted macroscopic mechanical tests to characterize their elasticity and viscoelasticity.The results revealed that the central region displayed higher metabolic levels,elongated mitochondria,and an abundance of rough endoplasmic reticulum at the microscale.At the mesoscale,larger diameter portal veins were mainly distributed in the central region,while smaller diameter arteries were predominantly located at the periphery.At the macroscale,under a strain rate of 0.0167 s^(-1),no significant differences were observed in the elastic properties between the two regions.However,as the strain rate increased up to 0.167 s^(-1),the central region displayed higher porosity,resulting in reduced liquid loss,increased hardness,and higher viscosity compared to the periphery.Consequently,the liver demonstrated overall heterogeneity,with isotropic models suitable for the peripheral region,while more intricate models may be required to capture the complexity of the central region with its intricate vasculature.展开更多
A micro shear testing method which can suit to measure the mechanical properties of heterogeneous materials is introduced, and the properties in each zone of welded joint for CO2 arc welding can be evaluated by using ...A micro shear testing method which can suit to measure the mechanical properties of heterogeneous materials is introduced, and the properties in each zone of welded joint for CO2 arc welding can be evaluated by using this method in this paper. Moreover, these results are compared with those results of Charpy V-notch impact test and their correlation is discussed.展开更多
Background: To date there is not a material considered ideal for the lased dentin. Objective: To compare the bond strength to human lased dentin of self-etch and etch-and-rinse adhesive systems, a self-adhesive resin ...Background: To date there is not a material considered ideal for the lased dentin. Objective: To compare the bond strength to human lased dentin of self-etch and etch-and-rinse adhesive systems, a self-adhesive resin composite and a glass-ionomer cement. Methods: Forty human molars were sectioned to obtain a 2 mm-thick slab of mid-coronal dentin. The occlusal surface of each slab was polished by SiC paper (P600) for 10 s. Then an half part of dentin slabs was randomly selected for receiving treatment with 2.94 μm Er:YAG laser (DEKA, Smart 2940D Plus) with 10 Hz at 100 mJ, pulse duration of 230 μs with contact tip. Dentin slabs were randomly divided into four groups (n = 10). Six conical frustum-shaped build-ups were constructed on the occlusal surface of each dentin slab using bonding agents (OptiBond Solo Plus Group 1;OptiBond All-in-one Group 2) combined with a resin composite (Premise Flow), self-adhesive resin composites (Vertise Flow Group 3) and a glass-ionomer cement (Ketac-Fil Group 4). Specimens were subjected to μSBS test. Data were analyzed by a mixed model and Tukey’s test. Results: Measured bond strengths were (mean ± standard deviation): 20.8 ± 5.5 MPa (laser treatment) and 15.6 ± 4.5 MPa (SiC paper) for Group 1, 18.9 ± 5.3 MPa (laser treatment) and 14.0 ± 4.3 MPa (SiC paper) for Group 2, 7.9 ± 2.8 MPa (laser treatment) and 4.3 ± 2.2 MPa (SiC paper) for Group 3, 4.7 ± 1.9 MPa (laser treatment) and 2.6 ± 1.2 MPa (SiC paper) for Group 4. The inferential analysis showed that the dentin laser treatment significantly affected the bond strength within each individual group. On dentin treated with laser the bond strengths recorded for build-ups constructed with etch and rinse and self-etch adhesive systems were significantly higher than those recorded for build-ups constructed with self-adhesive resin composite and glass-ionomer cement (p < 0.0001). Similarly, on dentin treated with SiC paper the bond strengths recorded for build-ups constructed with etch and rinse and self-etch adhesive systems were significantly higher than those recorded for build-ups constructed with self-adhesive resin composite and glass-ionomer cement (p < 0.0001). Conclusion: Er:YAG laser treatment has increased the shear bond strength of all the adhesive materials used.展开更多
Collagen is one of the most important biomaterials for tissue engineering approaches.Despite its excellent biocompatibility,it shows the non-negligible disadvantage of poor mechanical stability.Photochemical crosslink...Collagen is one of the most important biomaterials for tissue engineering approaches.Despite its excellent biocompatibility,it shows the non-negligible disadvantage of poor mechanical stability.Photochemical crosslinking with rose bengal and green light(RGX)is an appropriate method to improve this property.The development of collagen laminates is helpful for further adjustment of the mechanical properties as well as the controlled release of incorporated substances.In this study,we investigate the impact of crosslinking and layering of two different collagen scaffolds on the swelling behavior andmechanical behavior inmicro tensile tests to obtain information on its wearing comfort(stiffness,strength and ductility).The mechanical stability of the collagen material after degradation due to cell contact is examined using thickness measurements.There is no linear increase or decrease due to layering homologous laminates.Unexpectedly,a decrease in elongation at break,Young’s modulus and ultimate tensile strength are measured when the untreated monolayer is compared to the crosslinked one.Furthermore,we can detect a connection between stability and cell proliferation.The results show that with variation in number and type of layers,collagen scaffolds with tailored mechanical properties can be produced.Such a multi-layered structure enables the release of biomolecules into inner or outer layers for biomedical applications.展开更多
基金funded by National Key R&D Program of China(Grant No.2023YFC3007001)Beijing Natural Science Foundation(Grant No.8244053)China Postdoctoral Science Foundation(Grant No.2024M754065).
文摘The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.
文摘The relation of mass, stiffness and rate of damping is obtained by using the mechanical analysis of the obstructive vibration system of two dimensions for the design of the obstructive vibration system of more freedom and the micro vibration test bed. The result of stimulational experiment indicates that the isolation of vibration of this system is satisfactory. The design method of vibration can be used as the reference to ultra precision machine tool, super micro orientation machanism and so on.
基金supported by the National Key Basic Research Program (No. 2010CB226800)the Innovation Team Development Program of the Ministry of Education (No. IRT0656)the Fundamental Research Funds for the Central Universities (No. 2010YL14)
文摘True triaxial rockburst experiments with four different unloading rates were performed on four prism specimens of granite sampled from Beishan, China. The damage evolution in the rockburst test was investigated from two aspects including fracture surface crack and fragment characteristics. The scanning electron microscopy was used to observe the micro crack information on fragment surface. Combing binarization and box counting dimensions, the fractal dimensions of cracks were obtained. Meanwhile,the fragments were collected and a sieving experiment was conducted. We weighed the fragments qualities, counted the amount of fragments and measured the fragments length, width and thickness.Utilizing four methods to calculate damage fractal dimensions of fragments, the trend of fractal value changing with unloading rates can be roughly described. It can be concluded from these experiments that the fractal dimension either for crack or for fragment holds a decreasing trend with the decreasing unloading rate, indicating a reduction of damage level.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2241273,12172034,U20A20390,and 11827803)the Beijing Municipal Natural Science Foundation(Grant No.7212205)+1 种基金the 111 project(Grant No.B13003)the Fundamental Research Funds for the Central Universities.
文摘Accurately characterizing the liver's mechanical properties is of paramount importance for disease diagnosis,treatment,surgical prosthetic modeling,and impact injury dummies.However,due to its inherent biological soft tissue nature,the characterization of mechanical behavior varies across testing methods and sample types.In this study,we employed transmission electron microscope and Micro CT to observe the morphology of the marginal and center of rat livers and conducted macroscopic mechanical tests to characterize their elasticity and viscoelasticity.The results revealed that the central region displayed higher metabolic levels,elongated mitochondria,and an abundance of rough endoplasmic reticulum at the microscale.At the mesoscale,larger diameter portal veins were mainly distributed in the central region,while smaller diameter arteries were predominantly located at the periphery.At the macroscale,under a strain rate of 0.0167 s^(-1),no significant differences were observed in the elastic properties between the two regions.However,as the strain rate increased up to 0.167 s^(-1),the central region displayed higher porosity,resulting in reduced liquid loss,increased hardness,and higher viscosity compared to the periphery.Consequently,the liver demonstrated overall heterogeneity,with isotropic models suitable for the peripheral region,while more intricate models may be required to capture the complexity of the central region with its intricate vasculature.
文摘A micro shear testing method which can suit to measure the mechanical properties of heterogeneous materials is introduced, and the properties in each zone of welded joint for CO2 arc welding can be evaluated by using this method in this paper. Moreover, these results are compared with those results of Charpy V-notch impact test and their correlation is discussed.
文摘Background: To date there is not a material considered ideal for the lased dentin. Objective: To compare the bond strength to human lased dentin of self-etch and etch-and-rinse adhesive systems, a self-adhesive resin composite and a glass-ionomer cement. Methods: Forty human molars were sectioned to obtain a 2 mm-thick slab of mid-coronal dentin. The occlusal surface of each slab was polished by SiC paper (P600) for 10 s. Then an half part of dentin slabs was randomly selected for receiving treatment with 2.94 μm Er:YAG laser (DEKA, Smart 2940D Plus) with 10 Hz at 100 mJ, pulse duration of 230 μs with contact tip. Dentin slabs were randomly divided into four groups (n = 10). Six conical frustum-shaped build-ups were constructed on the occlusal surface of each dentin slab using bonding agents (OptiBond Solo Plus Group 1;OptiBond All-in-one Group 2) combined with a resin composite (Premise Flow), self-adhesive resin composites (Vertise Flow Group 3) and a glass-ionomer cement (Ketac-Fil Group 4). Specimens were subjected to μSBS test. Data were analyzed by a mixed model and Tukey’s test. Results: Measured bond strengths were (mean ± standard deviation): 20.8 ± 5.5 MPa (laser treatment) and 15.6 ± 4.5 MPa (SiC paper) for Group 1, 18.9 ± 5.3 MPa (laser treatment) and 14.0 ± 4.3 MPa (SiC paper) for Group 2, 7.9 ± 2.8 MPa (laser treatment) and 4.3 ± 2.2 MPa (SiC paper) for Group 3, 4.7 ± 1.9 MPa (laser treatment) and 2.6 ± 1.2 MPa (SiC paper) for Group 4. The inferential analysis showed that the dentin laser treatment significantly affected the bond strength within each individual group. On dentin treated with laser the bond strengths recorded for build-ups constructed with etch and rinse and self-etch adhesive systems were significantly higher than those recorded for build-ups constructed with self-adhesive resin composite and glass-ionomer cement (p < 0.0001). Similarly, on dentin treated with SiC paper the bond strengths recorded for build-ups constructed with etch and rinse and self-etch adhesive systems were significantly higher than those recorded for build-ups constructed with self-adhesive resin composite and glass-ionomer cement (p < 0.0001). Conclusion: Er:YAG laser treatment has increased the shear bond strength of all the adhesive materials used.
基金supported by the Deutsche Forschungsgemeinschaft(Project number:400569699).
文摘Collagen is one of the most important biomaterials for tissue engineering approaches.Despite its excellent biocompatibility,it shows the non-negligible disadvantage of poor mechanical stability.Photochemical crosslinking with rose bengal and green light(RGX)is an appropriate method to improve this property.The development of collagen laminates is helpful for further adjustment of the mechanical properties as well as the controlled release of incorporated substances.In this study,we investigate the impact of crosslinking and layering of two different collagen scaffolds on the swelling behavior andmechanical behavior inmicro tensile tests to obtain information on its wearing comfort(stiffness,strength and ductility).The mechanical stability of the collagen material after degradation due to cell contact is examined using thickness measurements.There is no linear increase or decrease due to layering homologous laminates.Unexpectedly,a decrease in elongation at break,Young’s modulus and ultimate tensile strength are measured when the untreated monolayer is compared to the crosslinked one.Furthermore,we can detect a connection between stability and cell proliferation.The results show that with variation in number and type of layers,collagen scaffolds with tailored mechanical properties can be produced.Such a multi-layered structure enables the release of biomolecules into inner or outer layers for biomedical applications.
