Research results on the viscous flow deformation behavior of bulk amorphous alloy in different systems are reviewed. The material exhibits an ideal Newtonian fluid at a high temperature. Analytical solution of lamella...Research results on the viscous flow deformation behavior of bulk amorphous alloy in different systems are reviewed. The material exhibits an ideal Newtonian fluid at a high temperature. Analytical solution of lamellar fluid flow behavior is used to discuss the viscous flow behavior of the bulk amorphous alloy in the supercooled liquid state. A material model, which describes such deformation behavior of Mg6oCusoYlo amorphous alloy, is introduced into the finite element method of microformin8 process. Surface feature size was investigated and found not sensitive to the micro formability. Bulk amorphous alloy may possibly be applied to microelectro-mechanical-systems （MEMS） fabrication.展开更多
We report a simple method for fabricating all-solid-state micro-supercapacitors, utilizing laser writing technology. Porous graphene films with three-dimensional networks induced by laser from commercial polymer was a...We report a simple method for fabricating all-solid-state micro-supercapacitors, utilizing laser writing technology. Porous graphene films with three-dimensional networks induced by laser from commercial polymer was acted as scaffold for loading MnO2, a typical pseudocapacitive materials. Using gel electrolyte, all-solid-state pseudocapacitive micro-supercapacitors were fabricated. Compare to traditional printing and lithography techniques produced micro-supercapacitors, the as-fabricated devices demonstrate high volumetric capacitances, good stability and low leakage current, indicating a scalable and facile approach for future energy storage devices in portable microelectronics.展开更多
All-solid-state micro-supercapacitors are acknowledged as a very promising class of microscale energy storage devices for directly integrating portable and wearable electronics. However, the improvement of electrochem...All-solid-state micro-supercapacitors are acknowledged as a very promising class of microscale energy storage devices for directly integrating portable and wearable electronics. However, the improvement of electrochemical performance from materials to devices still remains tremendous challenges. Here, we demonstrate a novel and universal mask-assisted filtration technology for the simplified fabrication of all-solid-state planar micro-supercapacitors（MSCs） based on interdigital patterns of 2D pseudocapacitive MnO2 nanosheets and electrochemically exfoliated graphene film as both electrode and current collector, and polyvinyl alcohol/Li Cl gel as electrolyte. Remarkably, the resulting MSCs exhibit outstanding areal capacitance of ～355 m F/cm^2, which is among the highest values reported in the state-of-the-art MSCs. Meanwhile, MSCs possess exceptionally mechanical flexibility as high as ～92% of initial capacitance even at a highly bending angle of 180°, excellent cyclability with a capacitance retention of 95% after 3000 cycles, and impressive serial or parallel integration for modulating the voltage or capacitance. Therefore, our proposed strategy of simplified construction of MSCs will pave the ways for utilizing graphene and analogous pseudocapactive nanosheets in high-performance MSCs.展开更多
Micro-grid smooth switchover between different operation modes is important for steady operation and reliable power supply of micro-grid. In order to reduce the transient fluctuation of voltage and frequency during sw...Micro-grid smooth switchover between different operation modes is important for steady operation and reliable power supply of micro-grid. In order to reduce the transient fluctuation of voltage and frequency during switchover, this paper proposed a new switchover method based on controller state following. When transferring to island mode, the control method for inverter of storage device changed from PQ control to V/f control. Before switchover, the output of V/f controller is always following the output of PQ controller. So that the sudden change of output is avoided at the moment of switchover. A micro-grid model with photovoltaic and battery is built on DIgSILENT Power Factory simulation software, to simulate micro-grid switchover from grid-connected mode to island mode. Results show this method can effectively suppress the transient fluctuation of voltage and frequency, and reduce the influence of transient process on power grid. This conclusion has important practical significance on micro-grid smooth switchover from grid-con- nected mode to island mode.展开更多
Investigating the impact of microhydration on the excited-states and electronic excitation properties of biomolecules has remained one of the important yet challenging aspects of science because of the complexity of d...Investigating the impact of microhydration on the excited-states and electronic excitation properties of biomolecules has remained one of the important yet challenging aspects of science because of the complexity of developing models. However, with the advent of computational chemistry methods such as TD-DFT, many useful insights about the electronic excitation energy and excited-state nature of biomolecules can be explored. Accordingly, in our study, we have incorporated the TD-DFT/wB97XD/cc-pVTZ method to study the excited state properties of N-acetyl phenylalanine amide (NAPA-A(H<sub>2</sub>O) <sub>n</sub>) (n = 1 to 4) clusters from ground to the tenth lowest gaseous singlet excited state. We found that the C=O bond length gradually increases both in N-terminal amide and C-terminal amide after the sequential addition of water molecules because of intermolecular H-bonding and this intermolecular H-bonding becomes weaker after the sequential addition of H<sub>2</sub>O molecules. The UV absorption maxima of NAPA-A (H<sub>2</sub>O)<sub>n</sub> (n = 1 - 4) clusters consisted of two peaks that are S<sub>5</sub>←S<sub>0</sub> (1<sup>st</sup> absorption) and S<sub>6</sub>←S<sub>0</sub> (2<sup>nd</sup> absorption) excitations. The first absorption maxima were blue-shifted with the increase in oscillator strength. This means that strong H-bonds reduce the charge transfer and make clusters more rigid. On the other hand, the second absorption maxima were red-shifted with the decrease in oscillator strength. In the ECD spectra, the negative bands indicate the presence of an amide bond and L-configuration of micro hydrated NAPA-A clusters. Finally, our calculated absorption and fluorescence energy confirm that all the NAPA-A (H<sub>2</sub>O) <sub>n</sub> (n = 0 - 4) clusters revert to the ground state from the fluorescent state by emitting around 5.490 eV of light.展开更多
Discrete element method （DEM） is used in the present paper to simulate the microstructural evolution of a planar layer of copper particles during sintering. Formation of agglomerates and the effect of their rearrang...Discrete element method （DEM） is used in the present paper to simulate the microstructural evolution of a planar layer of copper particles during sintering. Formation of agglomerates and the effect of their rearrangement on densification are mainly focused on. Comparing to the existing experimental observations, we find that agglomerate can form spontaneously in sintering and its rearrangement could accelerate the densification of compacts. Snapshots of numerical simulations agree qualitatively well with experimental observations. The method could be readily extended to investigate the effect of agglomerate on sintering in a three- dimensional model, which should be very useful for understanding the evolution of microstructure of sintering systems.展开更多
基金supported by the National Natural Sci-ence Foundation of China under grant No. 50705092.
文摘Research results on the viscous flow deformation behavior of bulk amorphous alloy in different systems are reviewed. The material exhibits an ideal Newtonian fluid at a high temperature. Analytical solution of lamellar fluid flow behavior is used to discuss the viscous flow behavior of the bulk amorphous alloy in the supercooled liquid state. A material model, which describes such deformation behavior of Mg6oCusoYlo amorphous alloy, is introduced into the finite element method of microformin8 process. Surface feature size was investigated and found not sensitive to the micro formability. Bulk amorphous alloy may possibly be applied to microelectro-mechanical-systems （MEMS） fabrication.
基金financially supported by the National Natural Science Foundation of China(Nos.51706016,51506014)the China Postdoctoral Science Foundation(No.2017T100677)
文摘We report a simple method for fabricating all-solid-state micro-supercapacitors, utilizing laser writing technology. Porous graphene films with three-dimensional networks induced by laser from commercial polymer was acted as scaffold for loading MnO2, a typical pseudocapacitive materials. Using gel electrolyte, all-solid-state pseudocapacitive micro-supercapacitors were fabricated. Compare to traditional printing and lithography techniques produced micro-supercapacitors, the as-fabricated devices demonstrate high volumetric capacitances, good stability and low leakage current, indicating a scalable and facile approach for future energy storage devices in portable microelectronics.
基金the financial support from the National Natural Science Foundation of China(No.51572259)National Key R&D Program of China(Nos.2016YBF0100100 and2016YFA0200200)+2 种基金Thousand Youth Talents Plan of China,Natural Science Foundation of Liaoning Province(No.201602737)DICP(No.Y5610121T3)China Postdoctoral Science Foundation(Nos.2016M601348 and 2016M601349)
文摘All-solid-state micro-supercapacitors are acknowledged as a very promising class of microscale energy storage devices for directly integrating portable and wearable electronics. However, the improvement of electrochemical performance from materials to devices still remains tremendous challenges. Here, we demonstrate a novel and universal mask-assisted filtration technology for the simplified fabrication of all-solid-state planar micro-supercapacitors（MSCs） based on interdigital patterns of 2D pseudocapacitive MnO2 nanosheets and electrochemically exfoliated graphene film as both electrode and current collector, and polyvinyl alcohol/Li Cl gel as electrolyte. Remarkably, the resulting MSCs exhibit outstanding areal capacitance of ～355 m F/cm^2, which is among the highest values reported in the state-of-the-art MSCs. Meanwhile, MSCs possess exceptionally mechanical flexibility as high as ～92% of initial capacitance even at a highly bending angle of 180°, excellent cyclability with a capacitance retention of 95% after 3000 cycles, and impressive serial or parallel integration for modulating the voltage or capacitance. Therefore, our proposed strategy of simplified construction of MSCs will pave the ways for utilizing graphene and analogous pseudocapactive nanosheets in high-performance MSCs.
文摘Micro-grid smooth switchover between different operation modes is important for steady operation and reliable power supply of micro-grid. In order to reduce the transient fluctuation of voltage and frequency during switchover, this paper proposed a new switchover method based on controller state following. When transferring to island mode, the control method for inverter of storage device changed from PQ control to V/f control. Before switchover, the output of V/f controller is always following the output of PQ controller. So that the sudden change of output is avoided at the moment of switchover. A micro-grid model with photovoltaic and battery is built on DIgSILENT Power Factory simulation software, to simulate micro-grid switchover from grid-connected mode to island mode. Results show this method can effectively suppress the transient fluctuation of voltage and frequency, and reduce the influence of transient process on power grid. This conclusion has important practical significance on micro-grid smooth switchover from grid-con- nected mode to island mode.
文摘Investigating the impact of microhydration on the excited-states and electronic excitation properties of biomolecules has remained one of the important yet challenging aspects of science because of the complexity of developing models. However, with the advent of computational chemistry methods such as TD-DFT, many useful insights about the electronic excitation energy and excited-state nature of biomolecules can be explored. Accordingly, in our study, we have incorporated the TD-DFT/wB97XD/cc-pVTZ method to study the excited state properties of N-acetyl phenylalanine amide (NAPA-A(H<sub>2</sub>O) <sub>n</sub>) (n = 1 to 4) clusters from ground to the tenth lowest gaseous singlet excited state. We found that the C=O bond length gradually increases both in N-terminal amide and C-terminal amide after the sequential addition of water molecules because of intermolecular H-bonding and this intermolecular H-bonding becomes weaker after the sequential addition of H<sub>2</sub>O molecules. The UV absorption maxima of NAPA-A (H<sub>2</sub>O)<sub>n</sub> (n = 1 - 4) clusters consisted of two peaks that are S<sub>5</sub>←S<sub>0</sub> (1<sup>st</sup> absorption) and S<sub>6</sub>←S<sub>0</sub> (2<sup>nd</sup> absorption) excitations. The first absorption maxima were blue-shifted with the increase in oscillator strength. This means that strong H-bonds reduce the charge transfer and make clusters more rigid. On the other hand, the second absorption maxima were red-shifted with the decrease in oscillator strength. In the ECD spectra, the negative bands indicate the presence of an amide bond and L-configuration of micro hydrated NAPA-A clusters. Finally, our calculated absorption and fluorescence energy confirm that all the NAPA-A (H<sub>2</sub>O) <sub>n</sub> (n = 0 - 4) clusters revert to the ground state from the fluorescent state by emitting around 5.490 eV of light.
基金supported by the National Natural Science Foundation of China (10972220, 11125211 and 11021262)973 Project(2012CB937500)
文摘Discrete element method （DEM） is used in the present paper to simulate the microstructural evolution of a planar layer of copper particles during sintering. Formation of agglomerates and the effect of their rearrangement on densification are mainly focused on. Comparing to the existing experimental observations, we find that agglomerate can form spontaneously in sintering and its rearrangement could accelerate the densification of compacts. Snapshots of numerical simulations agree qualitatively well with experimental observations. The method could be readily extended to investigate the effect of agglomerate on sintering in a three- dimensional model, which should be very useful for understanding the evolution of microstructure of sintering systems.
