Thickness deposition is a crucial issue on the application of electroformed micro mold inserts. Edge concentration effect is the main source of the non-uniformity. The techniques of adopting a non-conducting shield, a...Thickness deposition is a crucial issue on the application of electroformed micro mold inserts. Edge concentration effect is the main source of the non-uniformity. The techniques of adopting a non-conducting shield, a secondary electrode and a movable cathode were explored to improve the thickness deposition uniformity during the nickel electroforming process. Regarding these techniques, a micro electroforming system with a movable cathode was particularly developed. The thickness variation of a 16 mm×16 mm electroformed sample decreased respectively from 150% to 35%, 12% and 18% by these three techniques. Combining these validated methods, anickelmold insert for microlens array was electroformed with satisfactory mechanical properties and high replication precision. It could be applied to the following injection molding process.展开更多
In order to reduce the "trial-mold" risk and cost,numerical simulation method was applied to micro injection molding weld line development investigation. The micro tensile specimen which has the size of 0.1 ...In order to reduce the "trial-mold" risk and cost,numerical simulation method was applied to micro injection molding weld line development investigation. The micro tensile specimen which has the size of 0.1 mm(depth) ×0.4 mm(width) ×12 mm(length) in test area was selected as the objective part,and polypropylene(PP) as the experimental material. Respectively with specific commercial software(Mold Flow) and general computational fluid dynamic(CFD) software(Comsol Multiphysics) ,the simulation experiments for development of weld line in micro injection molding process were executed and the real comparison experiments were also carried out. The results show that during micro injection molding process,the specific commercial software for normal injection molding process is not valid to describe the micro flow process,the shape of flow front in micro cavity flowing which is important in weld line developing study and the contact angle due to surface tension are not able to be simulated. In order to improve the simulation results for micro weld line development,the general CFD software,which is more flexible in user defining function,is applied. The results show better effects in describing micro fluid flow behavior. As a conclusion,as for weld line forming process,the numerical simulation method can give a characteristic analysis results for processing parameters optimizing in micro injection molding process;but for both kinds of softwares quantitative analysis cannot be obtained unless the boundary condition and micro fluid mathematic model are improved in the future.展开更多
Metal mold micron scale precision casting technology was developed successfully,and three-dimension complicated microgear castings in micron scale were produced.Evolvement regularity of microgear castings were observe...Metal mold micron scale precision casting technology was developed successfully,and three-dimension complicated microgear castings in micron scale were produced.Evolvement regularity of microgear castings were observed by optical microscope and scanning electron microscope.Compared with conventional casting,microcasting is characterized by typical nonequilibrium solidification,for example,its grain size can be refined significantly,eutectic structure is transformed from lamellar morphology to rod eutectic,and the ratio of primary phase is increased.This kind of microstructure can promote mechanical properties of microcasting.展开更多
Silicon carbide (SiC) is highly wear resistant with good mechanical properties, including high temperature strength, excellent chemical resistance, and high thermal conductivity and thermal shock resistance. SiC molds...Silicon carbide (SiC) is highly wear resistant with good mechanical properties, including high temperature strength, excellent chemical resistance, and high thermal conductivity and thermal shock resistance. SiC molds, which can be produced with diverse microstructural features, are now widely used in glass molding owing to their excellent characteristics, and also have potential applicability in IT industries. SiC molds are traditionally fabricated by silicon micromachining or dicing. The fabrication cost of silicon micromachining is very high, however, because several expensive masks are needed. Furthermore, the fabrication time is very long. Meanwhile, it is difficult to make micro-patterned molds with arbitrary shapes using dicing saws. Abrasive water jet (AWJ) is widely applied to cut and drill very brittle, soft and fibrous materials. It offers high energy density, the absence of a heat affected zone(HAZ), high performance, and an environment friendly process. In spite of these advantages, micro-hole drilling via conventional AWJ processing suffers from notable shortcomings. We proposed a new abrasive supplying method of AWJ. The proposed method reduces frosting phenomena, and provides micro-machining of AWJ. The characteristics of a hole machined was investigated by the proposed AWJ process according to the ratio of water and abrasives. With the optimal experimental conditions, 3×3 array SiC molds with the diameter of 700 μm and depth of 900 μm were successfully manufactured.展开更多
In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included i...In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included in the injection molding the macro-component with a micro-channel. In this case, a simplified model is used to analyze the flow behaviors of the macro-sized part within a micro-channel. The flow behaviors in the macro-cavity are estimated by using the finite element and finite difference methods. The influence of the injection rate, micro-channel size, heat transfer coefficient, and mold temperature on the flowing distance is investigated based on the non-isothermal analytic method. The results show that an increase in the radius of the micro-channel and mold temperature can improve effectively the flowing distance in the micro-channel.展开更多
Micro powder injection molding （μPIM） was investigated for possible mass production of micro-components at rela- tively low cost. However, scaling down to such a level produces challenges in injection molding and d...Micro powder injection molding （μPIM） was investigated for possible mass production of micro-components at rela- tively low cost. However, scaling down to such a level produces challenges in injection molding and debinding. Micro gears were fabricated by μPIM from in-house feedstock. The effect of injection speed and injection pressure on the replication of the micro gear cavity was investigated. Solvent debinding and thermal debinding processes were discussed. The results show that micro gears can be successfully fabricated under the injection pressure of 70 MPa and the 60% injection speed. Either too low or too high injection speed can cause incomplete filling of micro gears. The same is the case with too low injection pressure. Too high injection pressure can bring cracks. Solvent debinding of micro gears was performed in a mixture of petroleum ether and ethanol. Subsequently, micro gears were successfully debound by a multistep heating schedule.展开更多
A novel highly porous 3-D poly（e-caprolactone） （PCL） scaffold with micro-channels was fabricated by injection molding and diluent acetic acids leaching technologies. In this study, the chitosan fiber was employed ...A novel highly porous 3-D poly（e-caprolactone） （PCL） scaffold with micro-channels was fabricated by injection molding and diluent acetic acids leaching technologies. In this study, the chitosan fiber was employed to form the microchannel in PCL matrix. The morphology, porosity and mechanical properties of the scaffolds were studied and calculated. It was found that the larger the content of chitosan fiber is, the higher the porosity would be, due to the volumetric expansion of chitosan fiber in PCL matrix during it being leached. In addition, the less the content of chitosan fiber is, the higher the compressive modulus would be.展开更多
A mathematical model for simulating the fluid flow, heat transfer and solidification in the conventional mold and the chamfer mold, together with a finite element stress-strain model in the straightening process of bo...A mathematical model for simulating the fluid flow, heat transfer and solidification in the conventional mold and the chamfer mold, together with a finite element stress-strain model in the straightening process of both molds, were established for the typical niobium, vanadium, and titanium micro-alloyed steels. On the basis of both numerical analysis, the mold copper plate with an optimum chamfered shape was designed and applied in industrial tests. The predicted results from numerical simulation of fluid flow, heat transfer and solidification in the conven tional mold and the chamfer mold show that the increased chamfered angle leads to an approximately linear increase o[ the slab surface temperature, but it also causes strong flow near the slab corner. Very small chamfered length can lead to a significant increase of the temperature near the slab corner. However, with further increasing the chamfered length, the temperature of the slab corner increased slightly. The calculated results from the finite element analysis of stress-strain during the straightening process show that at the same slope width, the tangential strain on the slat） edges and corners is minimum when the chamfered angle is 30° and 45°, which is only 40° to 46° of rectangular slabs with the same cross-section area. At the same chamfered angle of 30°, when the chamfered length is controlled between 65-85 mm, the tangential strain on the part of the slab edges and corners is relatively smaller. Industrial test results show that the slab corner temperature at straightening segment increases about 100 ℃ by using chamfer mold compared to the conventional molds. The slab transverse corner cracks have been reduced more than 95° in comparison with those in the conventional mold.展开更多
基金Projects(51305465,91123012)supported by the National Natural Science Foundation of China
文摘Thickness deposition is a crucial issue on the application of electroformed micro mold inserts. Edge concentration effect is the main source of the non-uniformity. The techniques of adopting a non-conducting shield, a secondary electrode and a movable cathode were explored to improve the thickness deposition uniformity during the nickel electroforming process. Regarding these techniques, a micro electroforming system with a movable cathode was particularly developed. The thickness variation of a 16 mm×16 mm electroformed sample decreased respectively from 150% to 35%, 12% and 18% by these three techniques. Combining these validated methods, anickelmold insert for microlens array was electroformed with satisfactory mechanical properties and high replication precision. It could be applied to the following injection molding process.
基金Project(ZI648/13-1) supported by German Research FoundationProject(D/06/00373) supported by German Academic Exchange Service
文摘In order to reduce the "trial-mold" risk and cost,numerical simulation method was applied to micro injection molding weld line development investigation. The micro tensile specimen which has the size of 0.1 mm(depth) ×0.4 mm(width) ×12 mm(length) in test area was selected as the objective part,and polypropylene(PP) as the experimental material. Respectively with specific commercial software(Mold Flow) and general computational fluid dynamic(CFD) software(Comsol Multiphysics) ,the simulation experiments for development of weld line in micro injection molding process were executed and the real comparison experiments were also carried out. The results show that during micro injection molding process,the specific commercial software for normal injection molding process is not valid to describe the micro flow process,the shape of flow front in micro cavity flowing which is important in weld line developing study and the contact angle due to surface tension are not able to be simulated. In order to improve the simulation results for micro weld line development,the general CFD software,which is more flexible in user defining function,is applied. The results show better effects in describing micro fluid flow behavior. As a conclusion,as for weld line forming process,the numerical simulation method can give a characteristic analysis results for processing parameters optimizing in micro injection molding process;but for both kinds of softwares quantitative analysis cannot be obtained unless the boundary condition and micro fluid mathematic model are improved in the future.
基金Project(50475028)supported by the National Natural Science Foundation of China
文摘Metal mold micron scale precision casting technology was developed successfully,and three-dimension complicated microgear castings in micron scale were produced.Evolvement regularity of microgear castings were observed by optical microscope and scanning electron microscope.Compared with conventional casting,microcasting is characterized by typical nonequilibrium solidification,for example,its grain size can be refined significantly,eutectic structure is transformed from lamellar morphology to rod eutectic,and the ratio of primary phase is increased.This kind of microstructure can promote mechanical properties of microcasting.
基金supported by a grant-in-aid for the National Core Research Center Program from the Ministry of Education Science & Technologythe Korea Science & Engineering Foundation (No.R15-2006-022-01001)
文摘Silicon carbide (SiC) is highly wear resistant with good mechanical properties, including high temperature strength, excellent chemical resistance, and high thermal conductivity and thermal shock resistance. SiC molds, which can be produced with diverse microstructural features, are now widely used in glass molding owing to their excellent characteristics, and also have potential applicability in IT industries. SiC molds are traditionally fabricated by silicon micromachining or dicing. The fabrication cost of silicon micromachining is very high, however, because several expensive masks are needed. Furthermore, the fabrication time is very long. Meanwhile, it is difficult to make micro-patterned molds with arbitrary shapes using dicing saws. Abrasive water jet (AWJ) is widely applied to cut and drill very brittle, soft and fibrous materials. It offers high energy density, the absence of a heat affected zone(HAZ), high performance, and an environment friendly process. In spite of these advantages, micro-hole drilling via conventional AWJ processing suffers from notable shortcomings. We proposed a new abrasive supplying method of AWJ. The proposed method reduces frosting phenomena, and provides micro-machining of AWJ. The characteristics of a hole machined was investigated by the proposed AWJ process according to the ratio of water and abrasives. With the optimal experimental conditions, 3×3 array SiC molds with the diameter of 700 μm and depth of 900 μm were successfully manufactured.
基金Project supported by the National Natural Science Foundation of China(Nos.51303027 and 11172271)the Scientific Research Staring Foundation,Fujian University of Technology of China(No.GY-Z13028)+1 种基金the Research Fund of Fujian Education Department(No.JA11189)the Research Fund for Enterprise Technology Innovation(No.2011-702-04)
文摘In the micro-molding of component with a micro-sized channel, the ability for polymer melt to flowing into the micro-channel in a macro-sized part is a big challenge. The multidimensional flow behaviors are included in the injection molding the macro-component with a micro-channel. In this case, a simplified model is used to analyze the flow behaviors of the macro-sized part within a micro-channel. The flow behaviors in the macro-cavity are estimated by using the finite element and finite difference methods. The influence of the injection rate, micro-channel size, heat transfer coefficient, and mold temperature on the flowing distance is investigated based on the non-isothermal analytic method. The results show that an increase in the radius of the micro-channel and mold temperature can improve effectively the flowing distance in the micro-channel.
基金supported by the National Natural Science Foundation of China (No. 51172018)the Fok Ying Tong Education Foundation (No.122016)
文摘Micro powder injection molding （μPIM） was investigated for possible mass production of micro-components at rela- tively low cost. However, scaling down to such a level produces challenges in injection molding and debinding. Micro gears were fabricated by μPIM from in-house feedstock. The effect of injection speed and injection pressure on the replication of the micro gear cavity was investigated. Solvent debinding and thermal debinding processes were discussed. The results show that micro gears can be successfully fabricated under the injection pressure of 70 MPa and the 60% injection speed. Either too low or too high injection speed can cause incomplete filling of micro gears. The same is the case with too low injection pressure. Too high injection pressure can bring cracks. Solvent debinding of micro gears was performed in a mixture of petroleum ether and ethanol. Subsequently, micro gears were successfully debound by a multistep heating schedule.
基金financially supported by the China Scholarship Council and the Wisconsin Institute for Discovery(WID),that enabled the authors to perform this research at the University of Wisconsin-Madison,the National Natural Science Foundation of China(No.51303027)the Scientific Research Staring Foundation,Fujian University of Technology,China(No.GY-Z13028)
文摘A novel highly porous 3-D poly（e-caprolactone） （PCL） scaffold with micro-channels was fabricated by injection molding and diluent acetic acids leaching technologies. In this study, the chitosan fiber was employed to form the microchannel in PCL matrix. The morphology, porosity and mechanical properties of the scaffolds were studied and calculated. It was found that the larger the content of chitosan fiber is, the higher the porosity would be, due to the volumetric expansion of chitosan fiber in PCL matrix during it being leached. In addition, the less the content of chitosan fiber is, the higher the compressive modulus would be.
基金Sponsored by National Natural Science Foundation of China(51204059)
文摘A mathematical model for simulating the fluid flow, heat transfer and solidification in the conventional mold and the chamfer mold, together with a finite element stress-strain model in the straightening process of both molds, were established for the typical niobium, vanadium, and titanium micro-alloyed steels. On the basis of both numerical analysis, the mold copper plate with an optimum chamfered shape was designed and applied in industrial tests. The predicted results from numerical simulation of fluid flow, heat transfer and solidification in the conven tional mold and the chamfer mold show that the increased chamfered angle leads to an approximately linear increase o[ the slab surface temperature, but it also causes strong flow near the slab corner. Very small chamfered length can lead to a significant increase of the temperature near the slab corner. However, with further increasing the chamfered length, the temperature of the slab corner increased slightly. The calculated results from the finite element analysis of stress-strain during the straightening process show that at the same slope width, the tangential strain on the slat） edges and corners is minimum when the chamfered angle is 30° and 45°, which is only 40° to 46° of rectangular slabs with the same cross-section area. At the same chamfered angle of 30°, when the chamfered length is controlled between 65-85 mm, the tangential strain on the part of the slab edges and corners is relatively smaller. Industrial test results show that the slab corner temperature at straightening segment increases about 100 ℃ by using chamfer mold compared to the conventional molds. The slab transverse corner cracks have been reduced more than 95° in comparison with those in the conventional mold.
