The issue of strong noise has increasingly become a bottleneck restricting the precision and application space of electromagnetic exploration methods.Noise suppression and extraction of effective electromagnetic respo...The issue of strong noise has increasingly become a bottleneck restricting the precision and application space of electromagnetic exploration methods.Noise suppression and extraction of effective electromagnetic response information under a strong noise background is a crucial scientific task to be addressed.To solve the noise suppression problem of the controlled-source electromagnetic method in strong interference areas,we propose an approach based on complex-plane 2D k-means clustering for data processing.Based on the stability of the controlled-source signal response,clustering analysis is applied to classify the spectra of different sources and noises in multiple time segments.By identifying the power spectra with controlled-source characteristics,it helps to improve the quality of the controlled-source response extraction.This paper presents the principle and workflow of the proposed algorithm,and demonstrates feasibility and effectiveness of the new algorithm through synthetic and real data examples.The results show that,compared with the conventional Robust denoising method,the clustering algorithm has a stronger suppression effect on common noise,can identify high-quality signals,and improve the preprocessing data quality of the controlledsource electromagnetic method.展开更多
This paper establishes the phase space in the light of spacial series data , discusses the fractal structure of geological data in terms of correlated functions and studies the chaos of these data . In addition , it i...This paper establishes the phase space in the light of spacial series data , discusses the fractal structure of geological data in terms of correlated functions and studies the chaos of these data . In addition , it introduces the R/S analysis for time series analysis into spacial series to calculate the structural fractal dimensions of ranges and standard deviation for spacial series data -and to establish the fractal dimension matrix and the procedures in plotting the fractal dimension anomaly diagram with vector distances of fractal dimension . At last , it has examples of its application .展开更多
Experimental and theoretical studies of the mechanisms of vibration stimulation of oil recovery in watered fields lead to the conclusion that resonance oscillations develop in fractured-block formations. These oscilla...Experimental and theoretical studies of the mechanisms of vibration stimulation of oil recovery in watered fields lead to the conclusion that resonance oscillations develop in fractured-block formations. These oscillations, caused by weak but long-lasting and frequency-stable influences, create the conditions for ultrasonic wave’s generation in the layers, which are capable of destroying thickened oil membranes in reservoir cracks. For fractured-porous reservoirs in the process of exploitation by the method of water high-pressure oil displacement, the possibility of intensifying ultrasonic vibrations can have an important technological significance. Even a very weak ultrasound can destroy, over a long period of time, the viscous oil membranes formed in the cracks between the blocks, which can be the reason for lowering the permeability of the layers and increasing the oil recovery. To describe these effects, it is necessary to consider the wave process in a hierarchically blocky environment and theoretically simulate the mechanism of the appearance of self-oscillations under the action of relaxation shear stresses. For the analysis of seism acoustic response in time on fixed intervals along the borehole an algorithm of phase diagrams of the state of many-phase medium is suggested.展开更多
Mitigating increasing cyberattack incidents may require strategies such as reinforcing organizations’ networks with Honeypots and effectively analyzing attack traffic for detection of zero-day attacks and vulnerabili...Mitigating increasing cyberattack incidents may require strategies such as reinforcing organizations’ networks with Honeypots and effectively analyzing attack traffic for detection of zero-day attacks and vulnerabilities. To effectively detect and mitigate cyberattacks, both computerized and visual analyses are typically required. However, most security analysts are not adequately trained in visualization principles and/or methods, which is required for effective visual perception of useful attack information hidden in attack data. Additionally, Honeypot has proven useful in cyberattack research, but no studies have comprehensively investigated visualization practices in the field. In this paper, we reviewed visualization practices and methods commonly used in the discovery and communication of attack patterns based on Honeypot network traffic data. Using the PRISMA methodology, we identified and screened 218 papers and evaluated only 37 papers having a high impact. Most Honeypot papers conducted summary statistics of Honeypot data based on static data metrics such as IP address, port, and packet size. They visually analyzed Honeypot attack data using simple graphical methods (such as line, bar, and pie charts) that tend to hide useful attack information. Furthermore, only a few papers conducted extended attack analysis, and commonly visualized attack data using scatter and linear plots. Papers rarely included simple yet sophisticated graphical methods, such as box plots and histograms, which allow for critical evaluation of analysis results. While a significant number of automated visualization tools have incorporated visualization standards by default, the construction of effective and expressive graphical methods for easy pattern discovery and explainable insights still requires applied knowledge and skill of visualization principles and tools, and occasionally, an interdisciplinary collaboration with peers. We, therefore, suggest the need, going forward, for non-classical graphical methods for visualizing attack patterns and communicating analysis results. We also recommend training investigators in visualization principles and standards for effective visual perception and presentation.展开更多
Space debris poses a serious threat to human space activities and needs to be measured and cataloged. As a new technology for space target surveillance, the measurement accuracy of diffuse reflection laser ranging （D...Space debris poses a serious threat to human space activities and needs to be measured and cataloged. As a new technology for space target surveillance, the measurement accuracy of diffuse reflection laser ranging （DRLR） is much higher than that of microwave radar and optoelectronic measurement. Based on the laser ranging data of space debris from the DRLR system at Shanghai Astronomical Observatory acquired in March-April, 2013, the characteristics and precision of the laser ranging data are analyzed and their applications in orbit determination of space debris are discussed, which is implemented for the first time in China. The experiment indicates that the precision of laser ranging data can reach 39 cm-228 cm. When the data are sufficient enough （four arcs measured over three days）, the orbital accuracy of space debris can be up to 50 m.展开更多
Method development has always been and will continue to be a core driving force of microbiome science, In this perspective, we argue that in the next decade, method development in microbiome analysis will be driven by...Method development has always been and will continue to be a core driving force of microbiome science, In this perspective, we argue that in the next decade, method development in microbiome analysis will be driven by three key changes in both ways of thinking and technological platforms： ① a shift from dissecting microbiota structure by sequencing to tracking microbiota state, function, and intercellular interaction via imaging; ② a shift from interrogating a consortium or population of cells to probing individual cells; and ③a shift from microbiome data analysis to microbiome data science. Some of the recent methoddevelopment efforts by Chinese microbiome scientists and their international collaborators that underlie these technological trends are highlighted here. It is our belief that the China Microbiome Initiative has the opportunity to deliver outstanding ＂Made-in-China＂ tools to the international research community, by building an ambitious, competitive, and collaborative program at the forefront of method development for microbiome science.展开更多
The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detecte...The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.展开更多
In the paper, the primary component analysis is made using 8 seismicity parameters of earthquake frequency N (ML≥3.0), b-value, η-value, A(b)-value, Mf-value, Ac-value, C-value and D-value that reflect the character...In the paper, the primary component analysis is made using 8 seismicity parameters of earthquake frequency N (ML≥3.0), b-value, η-value, A(b)-value, Mf-value, Ac-value, C-value and D-value that reflect the characteristics of magnitude, time and space distribution of seismicity from different respects. By using the primary component analysis method, the synthesis parameter W reflecting the anomalous features of earthquake magnitude, time and space distribution can be gained. Generally, there is some relativity among the 8 parameters, but their variations are different in different periods. The earthquake prediction based on these parameters is not very well. However, the synthesis parameter W showed obvious anomalies before 13 earthquakes (MS≥5.8) occurred in North China, which indicates that the synthesis parameter W can reflect the anomalous characteristics of magnitude, time and space distribution of seismicity better. Other problems related to the conclusions drawn by the primary component analysis method are also discussed.展开更多
Seeing is an important index to evaluate the quality of an astronomical site.To estimate seeing at the Muztagh-Ata site with height and time quantitatively,the European Centre for Medium-Range Weather Forecasts reanal...Seeing is an important index to evaluate the quality of an astronomical site.To estimate seeing at the Muztagh-Ata site with height and time quantitatively,the European Centre for Medium-Range Weather Forecasts reanalysis database(ERA5)is used.Seeing calculated from ERA5 is compared consistently with the Differential Image Motion Monitor seeing at the height of 12 m.Results show that seeing decays exponentially with height at the Muztagh-Ata site.Seeing decays the fastest in fall in 2021 and most slowly with height in summer.The seeing condition is better in fall than in summer.The median value of seeing at 12 m is 0.89 arcsec,the maximum value is1.21 arcsec in August and the minimum is 0.66 arcsec in October.The median value of seeing at 12 m is 0.72arcsec in the nighttime and 1.08 arcsec in the daytime.Seeing is a combination of annual and about biannual variations with the same phase as temperature and wind speed indicating that seeing variation with time is influenced by temperature and wind speed.The Richardson number Ri is used to analyze the atmospheric stability and the variations of seeing are consistent with Ri between layers.These quantitative results can provide an important reference for a telescopic observation strategy.展开更多
Noise is a significant part within a millimeter-wave molecular line datacube.Analyzing the noise improves our understanding of noise characteristics,and further contributes to scientific discoveries.We measure the noi...Noise is a significant part within a millimeter-wave molecular line datacube.Analyzing the noise improves our understanding of noise characteristics,and further contributes to scientific discoveries.We measure the noise level of a single datacube from MWISP and perform statistical analyses.We identified major factors which increase the noise level of a single datacube,including bad channels,edge effects,baseline distortion and line contamination.Cleaning algorithms are applied to remove or reduce these noise components.As a result,we obtained the cleaned datacube in which noise follows a positively skewed normal distribution.We further analyzed the noise structure distribution of a 3 D mosaicked datacube in the range l=40°7 to 43°3 and b=-2°3 to 0°3 and found that noise in the final mosaicked datacube is mainly characterized by noise fluctuation among the cells.展开更多
The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from whi...The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.展开更多
The problem of predicting continuous scalar outcomes from functional predictors has received high levels of interest in recent years in many fields,especially in the food industry.The k-nearest neighbor(k-NN)method of...The problem of predicting continuous scalar outcomes from functional predictors has received high levels of interest in recent years in many fields,especially in the food industry.The k-nearest neighbor(k-NN)method of Near-Infrared Reflectance(NIR)analysis is practical,relatively easy to implement,and becoming one of the most popular methods for conducting food quality based on NIR data.The k-NN is often named k nearest neighbor classifier when it is used for classifying categorical variables,while it is called k-nearest neighbor regression when it is applied for predicting noncategorical variables.The objective of this paper is to use the functional Near-Infrared Reflectance(NIR)spectroscopy approach to predict some chemical components with some modern statistical models based on the kernel and k-Nearest Neighbour procedures.In this paper,three NIR spectroscopy datasets are used as examples,namely Cookie dough,sugar,and tecator data.Specifically,we propose three models for this kind of data which are Functional Nonparametric Regression,Functional Robust Regression,and Functional Relative Error Regression,with both kernel and k-NN approaches to compare between them.The experimental result shows the higher efficiency of k-NN predictor over the kernel predictor.The predictive power of the k-NN method was compared with that of the kernel method,and several real data sets were used to determine the predictive power of both methods.展开更多
This paper improves the slacks-based method for estimating inefficiency,derives the criteria for the selection of the weights of output and input inefficiencies in the objective function,and creates a new nonparametri...This paper improves the slacks-based method for estimating inefficiency,derives the criteria for the selection of the weights of output and input inefficiencies in the objective function,and creates a new nonparametric method for accounting economic growth.Based on this method,the paper estimates the sources of China s economic growth from 1978 to 2013.Our findings suggest that factor input and especially capital is a major source of economic growth for China as a whole and its major regions,and that economic growth in recent years is increasingly dependent on capital.For a rather long period of time before 2005,China s northeast,central and western regions lagged behind the eastern region in terms of economic growth,and TFP and factor input are major reasons behind such regional growth disparities.Although other regions have narrowed their disparities with and even overtaken the eastern region in terms of economic growth,the key driver is the rapid increase in the contribution of factor input.Advanced technologies of eastern region should be utilized to promote TFP progress in other regions,which is vital to economic growth in these regions and China as a whole.展开更多
The process of accurately defining and outlining mare basalt units is nec- essary for constraining the stratigraphy and ages of basalt units, which are used to determine the duration and the flux of lunar volcanism. W...The process of accurately defining and outlining mare basalt units is nec- essary for constraining the stratigraphy and ages of basalt units, which are used to determine the duration and the flux of lunar volcanism. We use a combination of Clementine＇s five-band ultraviolet/visible data and Ti02 and FeO abundance distri- bution maps to define homogenous mare basalt units and characterize their composi- tional variations （with maturity） in the Aristarchus region. With 20 groups of distinct mare basaltic soils identified using the method in this paper, six additional spectrally defined areas and five basaltic units are constructed, and their mineralogic quanfiza- tion values provide new constraints on their temporal and spatial evolution. Our results indicate that the Aristarchus region has diverse basalt units and a complex history of volcanic evolution. We also demonstrate that the techniques, from which spectrally distinct mare basalts can be mapped, performed well in this study and can be confi- dently expanded to other mare regions of the Moon.展开更多
It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that...It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that of the adjoint of model: the averaged absolute difference of the amplitude between observations and simulation is less than 5.0 cm and that of the phase-lag is less than 5.0°. The results are both in good agreement with the observed M2 tide in the Bohai Sea and the Yellow Sea. For comparison, the traditional methods also have been used to simulate M2 tide in the Bohai Sea and the Yellow Sea. The initial guess values of the boundary conditions are given first, and then are adjusted to acquire the simulated results that are as close as possible to the observations. As the boundary conditions contain 72 values, which should be adjusted and how to adjust them can only be partially solved by adjusting them many times. The satisfied results are hard to acquire even gigantic efforts are done. Here, the automation of the treatment of the open boundary conditions is realized. The method is unique and superior to the traditional methods. It is emphasized that if the adjoint of equation is used, tedious and complicated mathematical deduction can be avoided. Therefore the adjoint of equation should attract much attention.展开更多
Properties of the Schwabe cycles in solar activity are investigated by using wavelet transform. We study the main range of the Schwabe cycles of the solar activity recorded by relative sunspot numbers, and find that t...Properties of the Schwabe cycles in solar activity are investigated by using wavelet transform. We study the main range of the Schwabe cycles of the solar activity recorded by relative sunspot numbers, and find that the main range of the Schwabe cycles is the periodic span from 8-year to 14-year. We make the comparison of 11-year’s phase between relative sunspot numbers and sunspot group numbers. The results show that there is some difference between two phases for the interval from 1710 to 1810, while the two phases are almost the same for the interval from 1810 to 1990.展开更多
Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surfa...Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surface environment. To better understand the environment of this region, this paper utilizes the available high-resolution topography data, image data and geological data to carry out a detailed analysis and research on the area surrounding the landing site （Sinus Iridum and 45 km×70 km of the landing area） as well as on the topography, landform, geology and lunar dust of the area surrounding the landing site. A general topographic analysis of the surrounding area is based on a digital elevation model and digital elevation model data acquired by Chang＇e-2 that have high resolution; the geology analysis is based on lunar geological data published by USGS; the study on topographic factors and distribution of craters and rocks in the surrounding area covering 4km^4km or even smaller is based on images from the CE-3 landing camera and images from the topographic camera; an analysis is done of the effect of the CE-3 engine plume on the lunar surface by comparing images before and after the landing using data from the landing camera. A comprehensive analysis of the results shows that the landing site and its surrounding area are identified as typical lunar mare with flat topography. They are suitable for maneuvers by the rover, and are rich in geological phenomena and scientific targets, making it an ideal site for exploration.展开更多
A technique for timescale analysis of spectral lags performed directly in the time domain is developed. Simulation studies are made to compare the time domain technique with the Fourier frequency analysis for spectral...A technique for timescale analysis of spectral lags performed directly in the time domain is developed. Simulation studies are made to compare the time domain technique with the Fourier frequency analysis for spectral time lags. The time domain technique is applied to studying rapid variabilities of X-ray binaries and γ-ray bursts. The results indicate that in comparison with the Fourier analysis the timescale analysis technique is more powerful for the study of spectral lags in rapid variabilities on short time scales and short duration flaring phenomena.展开更多
The regional BeiDou Satellite System, or BDS2, broadcasts a differential correction as Equivalent Satellite Clock Correction to correct both orbit and satellite clock errors. For the global BDS, or BDS3, satellite orb...The regional BeiDou Satellite System, or BDS2, broadcasts a differential correction as Equivalent Satellite Clock Correction to correct both orbit and satellite clock errors. For the global BDS, or BDS3, satellite orbit and clock corrections conforming with RTCA standards will be broadcast to authorized users. The hybrid constellation and regional monitoring network pose challenges for the high precision separation of orbit and satellite clock corrections. Three correction models of kinematic,dynamic and Two-way Satellite Time Frequency Transfer(TWSTFT)-based dynamic were studied to estimate the satellite orbit and clock corrections. The correction accuracy of the three models is compared and analyzed based on the BDS observation data. Results show that the accuracies(root mean square, RMS) of dual-frequency real-time positioning for the three models are about 1.76 m, 1.78 m and 2.08 m respectively, which are comparable with the performance of WAAS and EGNOS. With dynamic corrections, the precision of Precise Point Positioning(PPP) experiments may reach about 23 cm after convergence.展开更多
基金supported by the National Key Research and Development Program Project of China(Grant No.2023YFF0718003)the key research and development plan project of Yunnan Province(Grant No.202303AA080006).
文摘The issue of strong noise has increasingly become a bottleneck restricting the precision and application space of electromagnetic exploration methods.Noise suppression and extraction of effective electromagnetic response information under a strong noise background is a crucial scientific task to be addressed.To solve the noise suppression problem of the controlled-source electromagnetic method in strong interference areas,we propose an approach based on complex-plane 2D k-means clustering for data processing.Based on the stability of the controlled-source signal response,clustering analysis is applied to classify the spectra of different sources and noises in multiple time segments.By identifying the power spectra with controlled-source characteristics,it helps to improve the quality of the controlled-source response extraction.This paper presents the principle and workflow of the proposed algorithm,and demonstrates feasibility and effectiveness of the new algorithm through synthetic and real data examples.The results show that,compared with the conventional Robust denoising method,the clustering algorithm has a stronger suppression effect on common noise,can identify high-quality signals,and improve the preprocessing data quality of the controlledsource electromagnetic method.
文摘This paper establishes the phase space in the light of spacial series data , discusses the fractal structure of geological data in terms of correlated functions and studies the chaos of these data . In addition , it introduces the R/S analysis for time series analysis into spacial series to calculate the structural fractal dimensions of ranges and standard deviation for spacial series data -and to establish the fractal dimension matrix and the procedures in plotting the fractal dimension anomaly diagram with vector distances of fractal dimension . At last , it has examples of its application .
文摘Experimental and theoretical studies of the mechanisms of vibration stimulation of oil recovery in watered fields lead to the conclusion that resonance oscillations develop in fractured-block formations. These oscillations, caused by weak but long-lasting and frequency-stable influences, create the conditions for ultrasonic wave’s generation in the layers, which are capable of destroying thickened oil membranes in reservoir cracks. For fractured-porous reservoirs in the process of exploitation by the method of water high-pressure oil displacement, the possibility of intensifying ultrasonic vibrations can have an important technological significance. Even a very weak ultrasound can destroy, over a long period of time, the viscous oil membranes formed in the cracks between the blocks, which can be the reason for lowering the permeability of the layers and increasing the oil recovery. To describe these effects, it is necessary to consider the wave process in a hierarchically blocky environment and theoretically simulate the mechanism of the appearance of self-oscillations under the action of relaxation shear stresses. For the analysis of seism acoustic response in time on fixed intervals along the borehole an algorithm of phase diagrams of the state of many-phase medium is suggested.
文摘Mitigating increasing cyberattack incidents may require strategies such as reinforcing organizations’ networks with Honeypots and effectively analyzing attack traffic for detection of zero-day attacks and vulnerabilities. To effectively detect and mitigate cyberattacks, both computerized and visual analyses are typically required. However, most security analysts are not adequately trained in visualization principles and/or methods, which is required for effective visual perception of useful attack information hidden in attack data. Additionally, Honeypot has proven useful in cyberattack research, but no studies have comprehensively investigated visualization practices in the field. In this paper, we reviewed visualization practices and methods commonly used in the discovery and communication of attack patterns based on Honeypot network traffic data. Using the PRISMA methodology, we identified and screened 218 papers and evaluated only 37 papers having a high impact. Most Honeypot papers conducted summary statistics of Honeypot data based on static data metrics such as IP address, port, and packet size. They visually analyzed Honeypot attack data using simple graphical methods (such as line, bar, and pie charts) that tend to hide useful attack information. Furthermore, only a few papers conducted extended attack analysis, and commonly visualized attack data using scatter and linear plots. Papers rarely included simple yet sophisticated graphical methods, such as box plots and histograms, which allow for critical evaluation of analysis results. While a significant number of automated visualization tools have incorporated visualization standards by default, the construction of effective and expressive graphical methods for easy pattern discovery and explainable insights still requires applied knowledge and skill of visualization principles and tools, and occasionally, an interdisciplinary collaboration with peers. We, therefore, suggest the need, going forward, for non-classical graphical methods for visualizing attack patterns and communicating analysis results. We also recommend training investigators in visualization principles and standards for effective visual perception and presentation.
基金Supported by the National Natural Science Foundation of China
文摘Space debris poses a serious threat to human space activities and needs to be measured and cataloged. As a new technology for space target surveillance, the measurement accuracy of diffuse reflection laser ranging （DRLR） is much higher than that of microwave radar and optoelectronic measurement. Based on the laser ranging data of space debris from the DRLR system at Shanghai Astronomical Observatory acquired in March-April, 2013, the characteristics and precision of the laser ranging data are analyzed and their applications in orbit determination of space debris are discussed, which is implemented for the first time in China. The experiment indicates that the precision of laser ranging data can reach 39 cm-228 cm. When the data are sufficient enough （four arcs measured over three days）, the orbital accuracy of space debris can be up to 50 m.
基金We are grateful to the support from the National Natural Science Foundation of China （NSFC） （31425002, 91231205, 81430011, 61303161, 31470220, and 31327001）, and the Frontier Science Research Program, the Soil-Microbe System Function and Regulation Program, and the Science and Technology Service Network Initiative （STS） from the Chinese Academy of Sciences （CAS）.
文摘Method development has always been and will continue to be a core driving force of microbiome science, In this perspective, we argue that in the next decade, method development in microbiome analysis will be driven by three key changes in both ways of thinking and technological platforms： ① a shift from dissecting microbiota structure by sequencing to tracking microbiota state, function, and intercellular interaction via imaging; ② a shift from interrogating a consortium or population of cells to probing individual cells; and ③a shift from microbiome data analysis to microbiome data science. Some of the recent methoddevelopment efforts by Chinese microbiome scientists and their international collaborators that underlie these technological trends are highlighted here. It is our belief that the China Microbiome Initiative has the opportunity to deliver outstanding ＂Made-in-China＂ tools to the international research community, by building an ambitious, competitive, and collaborative program at the forefront of method development for microbiome science.
基金Supported by the National Natural Science Foundation of China
文摘The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.
基金Project of Joint Seismological Science Foundation of China (104090).
文摘In the paper, the primary component analysis is made using 8 seismicity parameters of earthquake frequency N (ML≥3.0), b-value, η-value, A(b)-value, Mf-value, Ac-value, C-value and D-value that reflect the characteristics of magnitude, time and space distribution of seismicity from different respects. By using the primary component analysis method, the synthesis parameter W reflecting the anomalous features of earthquake magnitude, time and space distribution can be gained. Generally, there is some relativity among the 8 parameters, but their variations are different in different periods. The earthquake prediction based on these parameters is not very well. However, the synthesis parameter W showed obvious anomalies before 13 earthquakes (MS≥5.8) occurred in North China, which indicates that the synthesis parameter W can reflect the anomalous characteristics of magnitude, time and space distribution of seismicity better. Other problems related to the conclusions drawn by the primary component analysis method are also discussed.
基金funded by the National Natural Science Foundation of China(NSFC)the Chinese Academy of Sciences(CAS)(grant No.U2031209)the National Natural Science Foundation of China(NSFC,grant Nos.11872128,42174192,and 91952111)。
文摘Seeing is an important index to evaluate the quality of an astronomical site.To estimate seeing at the Muztagh-Ata site with height and time quantitatively,the European Centre for Medium-Range Weather Forecasts reanalysis database(ERA5)is used.Seeing calculated from ERA5 is compared consistently with the Differential Image Motion Monitor seeing at the height of 12 m.Results show that seeing decays exponentially with height at the Muztagh-Ata site.Seeing decays the fastest in fall in 2021 and most slowly with height in summer.The seeing condition is better in fall than in summer.The median value of seeing at 12 m is 0.89 arcsec,the maximum value is1.21 arcsec in August and the minimum is 0.66 arcsec in October.The median value of seeing at 12 m is 0.72arcsec in the nighttime and 1.08 arcsec in the daytime.Seeing is a combination of annual and about biannual variations with the same phase as temperature and wind speed indicating that seeing variation with time is influenced by temperature and wind speed.The Richardson number Ri is used to analyze the atmospheric stability and the variations of seeing are consistent with Ri between layers.These quantitative results can provide an important reference for a telescopic observation strategy.
基金supported by the National Key R&D Program of China(2017YFA0402701)Key Research Program of Frontier Sciences of CAS(QYZDJ-SSW-SLH047)partially supported by the National Natural Science Foundation of China(Grant No.U2031202)。
文摘Noise is a significant part within a millimeter-wave molecular line datacube.Analyzing the noise improves our understanding of noise characteristics,and further contributes to scientific discoveries.We measure the noise level of a single datacube from MWISP and perform statistical analyses.We identified major factors which increase the noise level of a single datacube,including bad channels,edge effects,baseline distortion and line contamination.Cleaning algorithms are applied to remove or reduce these noise components.As a result,we obtained the cleaned datacube in which noise follows a positively skewed normal distribution.We further analyzed the noise structure distribution of a 3 D mosaicked datacube in the range l=40°7 to 43°3 and b=-2°3 to 0°3 and found that noise in the final mosaicked datacube is mainly characterized by noise fluctuation among the cells.
基金supported by the National Natural Science Foundation of China (Grant No. 11173038)
文摘The microwave radiometer （MRM） onboard the Chang＇ E-1 （CE-I） lu- nar orbiter is a 4-frequency microwave radiometer, and it is mainly used to obtain the brightness temperature （TB） of the lunar surface, from which the thickness, temperature, dielectric constant and other related properties of the lunar regolith can be derived. The working mode of the CE-1 MRM, the ground calibration （including the official calibration coefficients）, as well as the acquisition and processing of the raw data are introduced. Our data analysis shows that TB increases with increasing frequency, decreases towards the lunar poles and is significantly affected by solar illumination. Our analysis also reveals that the main uncertainty in TB comes from ground calibration.
基金funding this work through the Research Groups Program under Grant Number R.G.P.1/189/41.I.M.A.and M.K.A.received the grant.
文摘The problem of predicting continuous scalar outcomes from functional predictors has received high levels of interest in recent years in many fields,especially in the food industry.The k-nearest neighbor(k-NN)method of Near-Infrared Reflectance(NIR)analysis is practical,relatively easy to implement,and becoming one of the most popular methods for conducting food quality based on NIR data.The k-NN is often named k nearest neighbor classifier when it is used for classifying categorical variables,while it is called k-nearest neighbor regression when it is applied for predicting noncategorical variables.The objective of this paper is to use the functional Near-Infrared Reflectance(NIR)spectroscopy approach to predict some chemical components with some modern statistical models based on the kernel and k-Nearest Neighbour procedures.In this paper,three NIR spectroscopy datasets are used as examples,namely Cookie dough,sugar,and tecator data.Specifically,we propose three models for this kind of data which are Functional Nonparametric Regression,Functional Robust Regression,and Functional Relative Error Regression,with both kernel and k-NN approaches to compare between them.The experimental result shows the higher efficiency of k-NN predictor over the kernel predictor.The predictive power of the k-NN method was compared with that of the kernel method,and several real data sets were used to determine the predictive power of both methods.
文摘This paper improves the slacks-based method for estimating inefficiency,derives the criteria for the selection of the weights of output and input inefficiencies in the objective function,and creates a new nonparametric method for accounting economic growth.Based on this method,the paper estimates the sources of China s economic growth from 1978 to 2013.Our findings suggest that factor input and especially capital is a major source of economic growth for China as a whole and its major regions,and that economic growth in recent years is increasingly dependent on capital.For a rather long period of time before 2005,China s northeast,central and western regions lagged behind the eastern region in terms of economic growth,and TFP and factor input are major reasons behind such regional growth disparities.Although other regions have narrowed their disparities with and even overtaken the eastern region in terms of economic growth,the key driver is the rapid increase in the contribution of factor input.Advanced technologies of eastern region should be utilized to promote TFP progress in other regions,which is vital to economic growth in these regions and China as a whole.
基金Supported by the National Natural Science Foundation of China
文摘The process of accurately defining and outlining mare basalt units is nec- essary for constraining the stratigraphy and ages of basalt units, which are used to determine the duration and the flux of lunar volcanism. We use a combination of Clementine＇s five-band ultraviolet/visible data and Ti02 and FeO abundance distri- bution maps to define homogenous mare basalt units and characterize their composi- tional variations （with maturity） in the Aristarchus region. With 20 groups of distinct mare basaltic soils identified using the method in this paper, six additional spectrally defined areas and five basaltic units are constructed, and their mineralogic quanfiza- tion values provide new constraints on their temporal and spatial evolution. Our results indicate that the Aristarchus region has diverse basalt units and a complex history of volcanic evolution. We also demonstrate that the techniques, from which spectrally distinct mare basalts can be mapped, performed well in this study and can be confi- dently expanded to other mare regions of the Moon.
文摘It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that of the adjoint of model: the averaged absolute difference of the amplitude between observations and simulation is less than 5.0 cm and that of the phase-lag is less than 5.0°. The results are both in good agreement with the observed M2 tide in the Bohai Sea and the Yellow Sea. For comparison, the traditional methods also have been used to simulate M2 tide in the Bohai Sea and the Yellow Sea. The initial guess values of the boundary conditions are given first, and then are adjusted to acquire the simulated results that are as close as possible to the observations. As the boundary conditions contain 72 values, which should be adjusted and how to adjust them can only be partially solved by adjusting them many times. The satisfied results are hard to acquire even gigantic efforts are done. Here, the automation of the treatment of the open boundary conditions is realized. The method is unique and superior to the traditional methods. It is emphasized that if the adjoint of equation is used, tedious and complicated mathematical deduction can be avoided. Therefore the adjoint of equation should attract much attention.
基金the National Natural Science Foundation of China.
文摘Properties of the Schwabe cycles in solar activity are investigated by using wavelet transform. We study the main range of the Schwabe cycles of the solar activity recorded by relative sunspot numbers, and find that the main range of the Schwabe cycles is the periodic span from 8-year to 14-year. We make the comparison of 11-year’s phase between relative sunspot numbers and sunspot group numbers. The results show that there is some difference between two phases for the interval from 1710 to 1810, while the two phases are almost the same for the interval from 1810 to 1990.
基金Supported by the National Natural Science Foundation of China
文摘Chang＇e-3 （CE-3） landed on the Mare Imbrium basin in the east part of Sinus Iridum （19.51°W, 44.12°N）, which was China＇s first soft landing on the Moon and it started collecting data on the lunar surface environment. To better understand the environment of this region, this paper utilizes the available high-resolution topography data, image data and geological data to carry out a detailed analysis and research on the area surrounding the landing site （Sinus Iridum and 45 km×70 km of the landing area） as well as on the topography, landform, geology and lunar dust of the area surrounding the landing site. A general topographic analysis of the surrounding area is based on a digital elevation model and digital elevation model data acquired by Chang＇e-2 that have high resolution; the geology analysis is based on lunar geological data published by USGS; the study on topographic factors and distribution of craters and rocks in the surrounding area covering 4km^4km or even smaller is based on images from the CE-3 landing camera and images from the topographic camera; an analysis is done of the effect of the CE-3 engine plume on the lunar surface by comparing images before and after the landing using data from the landing camera. A comprehensive analysis of the results shows that the landing site and its surrounding area are identified as typical lunar mare with flat topography. They are suitable for maneuvers by the rover, and are rich in geological phenomena and scientific targets, making it an ideal site for exploration.
基金the National Natural Science Foundation of China.
文摘A technique for timescale analysis of spectral lags performed directly in the time domain is developed. Simulation studies are made to compare the time domain technique with the Fourier frequency analysis for spectral time lags. The time domain technique is applied to studying rapid variabilities of X-ray binaries and γ-ray bursts. The results indicate that in comparison with the Fourier analysis the timescale analysis technique is more powerful for the study of spectral lags in rapid variabilities on short time scales and short duration flaring phenomena.
基金supported by the National Key Research Program of China as the“Collaborative Precision Positioning Project”(No.2016YFB0501900)the National Natural Science Foundation of China(Grant Nos.41674041,41574029 and 11203059)+2 种基金the Youth Innovation Promotion Association CAS(Grant No.2016242)Shanghai Science and Technology Committee Foundation(Grant No.16511103003)the Shanghai Key Laboratory of Space Navigation and Position Techniques(Grant No.12DZ2273300,ZZXT201701)
文摘The regional BeiDou Satellite System, or BDS2, broadcasts a differential correction as Equivalent Satellite Clock Correction to correct both orbit and satellite clock errors. For the global BDS, or BDS3, satellite orbit and clock corrections conforming with RTCA standards will be broadcast to authorized users. The hybrid constellation and regional monitoring network pose challenges for the high precision separation of orbit and satellite clock corrections. Three correction models of kinematic,dynamic and Two-way Satellite Time Frequency Transfer(TWSTFT)-based dynamic were studied to estimate the satellite orbit and clock corrections. The correction accuracy of the three models is compared and analyzed based on the BDS observation data. Results show that the accuracies(root mean square, RMS) of dual-frequency real-time positioning for the three models are about 1.76 m, 1.78 m and 2.08 m respectively, which are comparable with the performance of WAAS and EGNOS. With dynamic corrections, the precision of Precise Point Positioning(PPP) experiments may reach about 23 cm after convergence.
