Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,a...Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.展开更多
An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow...An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.展开更多
Hydrogen is widely regarded as a crucial energy carrier for achieving carbon neutrality and a sustainable future.Direct seawater electrolysis using renewable energy presents a promising approach for large-scale hydrog...Hydrogen is widely regarded as a crucial energy carrier for achieving carbon neutrality and a sustainable future.Direct seawater electrolysis using renewable energy presents a promising approach for large-scale hydrogen production.Reactions of this nature at high current density and Faradaic efficiency are hampered by two challenges.展开更多
Electrocatalysis has emerged as a sustainable approach for the selective oxidation of fatty alcohols to fatty acids,circumventing the environmental concerns associated with conventional routes.However,the low aqueous ...Electrocatalysis has emerged as a sustainable approach for the selective oxidation of fatty alcohols to fatty acids,circumventing the environmental concerns associated with conventional routes.However,the low aqueous solubility of hydrophobic fatty alcohols presents a major challenge.While nickel hydroxide(Ni(OH)_(2))serves as a cost-effective catalyst for alcohol oxidation,its hydrophilic nature limits substrate accessibility and mass transport,causing sluggish kinetics and competing oxygen evolution.Herein,we propose a hydrophobic interface engineering strategy via co-electrodeposition of Ni(OH)_(2)with polytetrafluoroethylene(PTFE),fabricating the composite electrode(ED-Ni(OH)_(2)-PTFE).The optimized electrode achieves 95%Faradaic efficiency for octanoic acid at 1.5 V vs.RHE,with a production rate 2–3 times higher than pristine Ni(OH)_(2).Mechanistic studies combining in situ Raman spectroscopy,fluorescence imaging,and coarse-grained molecular dynamics simulations reveal that PTFE selectively enriches octanol at the electrode-electrolyte interface by modulating interfacial hydrophobicity.A continuous-flow microreactor integrating anodic octanol oxidation with cathodic hydrogen evolution reduces cell voltage by~100 m V,achieving simultaneous fatty acid and hydrogen production.This work highlights the critical role of hydrophobic interfacial microenvironment design in organic electrosynthesis,offering a promising strategy for upgrading fatty alcohols under mild conditions.展开更多
All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for t...All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for the next-generation energy storage systems.However,interfacial issues between SSEs and Nirich oxide cathode materials,attributed to space charge layer,interfacial side reactions,and mechanical contact failure,significantly restrict the performances of ASSBs.The interface degradation is closely related to the components of the composite cathode and the process of electrode fabrication.Focusing on the influencing factors of interface compatibility between SSEs and Ni-rich oxide cathode,this article systematically discusses how cathode active materials(CAMs),electrolytes,conductive additives,binders,and electrode fabrication impact the interface compatibility.In addition,the strategies for the compatibility modification are reviewed.Furthermore,the challenges and prospects of intensive research on the degradation and modification of the SSE/Ni-rich cathode material interface are discussed.This review is intended to inspire the development of high-energy-density and high-safety all-solid-state batteries.展开更多
Following publication of the original article[1],the authors found that they pasted the same data when drawing XRD for sample NCO-1 and NCO-2 in Fig.2a,however,the XRD of all four samples in the manuscript was tested,...Following publication of the original article[1],the authors found that they pasted the same data when drawing XRD for sample NCO-1 and NCO-2 in Fig.2a,however,the XRD of all four samples in the manuscript was tested,and XRD raw data were kept and can be offered.The correct Fig.2 has been provided in this Correction.展开更多
The front gate interface and oxide traps induced by hot carrier stress in SOI NMOSFETs are studied.Based on a new forward gated diode technique,the R G current originating from the front interface traps is me...The front gate interface and oxide traps induced by hot carrier stress in SOI NMOSFETs are studied.Based on a new forward gated diode technique,the R G current originating from the front interface traps is measured,and then the densities of the interface and oxide traps are separated independently.The experimental results show that the hot carrier stress of front channel not only results in the strong generation of the front interface traps,but also in the significant oxide traps.These two kinds of traps have similar characteristic in increasing with the hot carrier stress time.This analysis allows one to obtain a clear physical picture of the effects of the hot carrier stress on the generating of interface and oxide traps,which help to understand the degradation and reliability of the SOI MOSFETs.展开更多
Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances ar...Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances are far from practical needs due to the lack of efficient electrocatalysts.Engineering the lattice of metal-based nanomaterials via phase control has emerged as an effective strategy to modulate their intrinsic electrocatalytic properties.Herein,we realize boron(B)-insertion-induced phase regulation of rhodium(Rh)nanocrystals to obtain amorphous Rh_(4)B nanoparticles(NPs)and hexagonal close-packed(hcp)RhB NPs through a facile wet-chemical method.A high Faradaic efficiency(92.1±1.2%)and NH_(3) yield rate(629.5±11.0μmol h^(−1) cm^(−2))are achieved over hcp RhB NPs,far superior to those of most reported NORR nanocatalysts.In situ spectro-electrochemical analysis and density functional theory simulations reveal that the excellent electrocatalytic performances of hcp RhB NPs are attributed to the upshift of d-band center,enhanced NO adsorption/activation profile,and greatly reduced energy barrier of the rate-determining step.A demonstrative Zn-NO battery is assembled using hcp RhB NPs as the cathode and delivers a peak power density of 4.33 mW cm−2,realizing simultaneous NO removal,NH3 synthesis,and electricity output.展开更多
Alloying and interface effects are effective strategies for enhancing the performance of electrocatalysts in energy-related devices.Herein,dendritic Au-doped platinum-palladium alloy/dumbbell-like bismuth telluride he...Alloying and interface effects are effective strategies for enhancing the performance of electrocatalysts in energy-related devices.Herein,dendritic Au-doped platinum-palladium alloy/dumbbell-like bismuth telluride heterostructures(denoted PtPdAu/BiTe)were synthesized using a visible-light-assisted strategy.The coupling alloy and interfacial effects of PtPdAu/BiTe significantly improved the performance and stability of both the ethanol oxidation reaction(EOR)and methanol oxidation reaction(MOR).Introducing a small amount of Au effectively enhanced the CO tolerance of PtPdAu/BiTe compared to dendritic platinum-palladium alloy/dumbbell-like bismuth telluride heterostructures.PtPdAu/BiTe exhibited mass activities of 31.5 and 13.3 A·mg_(Pt)^(-1)in EOR and MOR,respectively,which were 34.4 and 13.2 times higher than those of commercial Pt black,revealing efficient Pt atom utilization.In-situ Fourier transform infrared spectroscopy demonstrated complete 12e^(-)and 6e^(-)oxidation of ethanol and methanol on PtPdAu/BiTe.The PtPdAu/BiTe/C achieved mass peak power densities of 131 and 156 mW·mg_(Pt)^(-1),which were 2.4 and 2.2 times higher than those of Pt/C in practical direct ethanol fuel cell(DEFC)and direct methanol fuel cell(DMFC),respectively,highlighting their potential application in DEFC and DMFC.This study introduces an effective strategy for designing efficient and highly CO tolerant anodic electrocatalysts for practical DEFC and DMFC applications.展开更多
As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal...As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.展开更多
Solid-state Na metal batteries(SSNBs),known for the low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interf...Solid-state Na metal batteries(SSNBs),known for the low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interfacial contact in solid-state electrolytes has hindered the commercialization of SSNBs.Driven by the concept of intimate electrode-electrolyte interface design,this study employs a combination of sodium-potassium(NaK)alloy and carbon nanotubes to prepare a semi-solid NaK(NKC)anode.Unlike traditional Na anodes,the paintable paste-like NKC anode exhibits superior adhesion and interface compatibility with both current collectors and gel electrolytes,significantly enhancing the physical contact of the electrode-electrolyte interface.Additionally,the filling of SiO_(2) nanoparticles improves the wettability of NaK alloy on gel polymer electrolytes,further achieving a conformal interface contact.Consequently,the overpotential of the NKC symmetric cell is markedly lower than that of the Na symmetric cell when subjected to a long cycle of 300 hrs.The full cell coupled with Na_(3)V_(2)(PO_(4))_(2) cathodes had an initial discharge capacity of 106.8 mAh·g^(-1) with a capacity retention of 89.61%after 300 cycles,and a high discharge capacity of 88.1 mAh·g^(-1) even at a high rate of 10 C.The outstanding electrochemical performance highlights the promising application potential of the NKC electrode.展开更多
Practical application of Na_(3)SbS_(4)(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of ...Practical application of Na_(3)SbS_(4)(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.展开更多
Nowadays,high-stable and ultrasensitive heavy metal detection is of utmost importance in water quality monitoring.Nanoparticle-enhanced laser-induced breakdown spectroscopy(NELIBS)shows high potential in hazardous met...Nowadays,high-stable and ultrasensitive heavy metal detection is of utmost importance in water quality monitoring.Nanoparticle-enhanced laser-induced breakdown spectroscopy(NELIBS)shows high potential in hazardous metal detection,however,encounters unstable and weak signals due to nonuniform distribution of analytes.Herein,we developed an interface self-assembly(ISA)method to create a uniformly distributed gold nanolayer at a liquid-liquid interface for positive heavy metal ions capture and NELIBS analysis.The electrostatically selfassembled Au nanoparticles(NPs)-analytes membrane was prepared at the oil-water interface by injecting ethanol into the mixture of cyclohexane and Au NPs-analytes water solution.Then,the interface self-assembled Au NPs-analytes membrane was transformed onto a laser-processed superhydrophilic Si slide for detection.Three heavy metals(cadmium(Cd),barium(Ba),and chromium(Cr))were analyzed to evaluate the stability and sensitivity of the ISA method for NELIBS.The results(Cd:RSD=3.6%,LoD=0.654 mg/L;Ba:RSD=3.4%,LoD=0.236 mg/L;Cr:RSD=7.7%,LoD=1.367 mg/L)demonstrated signal enhancement and high-stable and ultrasensitive detection.The actual sample detection(Cd:RE=7.71%,Ba:RE=6.78%)illustrated great reliability.The ISA method,creating a uniform distribution of NP-analytes at the interface,has promising prospects in NELIBS.展开更多
Two-dimensional(2D)metal oxides(2DMOs),such as MoO_(2),have made impressive strides in recent years,and their applicability in a number of fields such as electronic devices,optoelectronic devices and lasers has been d...Two-dimensional(2D)metal oxides(2DMOs),such as MoO_(2),have made impressive strides in recent years,and their applicability in a number of fields such as electronic devices,optoelectronic devices and lasers has been demonstrated.However,2DMOs present challenges in their synthesis using conventional methods due to their non-van der Waals nature.We report that KCl acts as a flux to prepare large-area 2DMOs with sub-millimeter scale.We systematically investigate the effects of temperature,homogeneous time and cooling rate on the products in the flux method,demonstrating that in this reaction a saturated homogenous solution is obtained upon the melting of the salt and precursor.Afterward,the cooling rate was adjusted to regulate the thickness of the target crystals,leading to the precipitation of 2D non-layered material from the supersaturated solution;by applying this method,the highly crystalline non-layered 2D MoO_(2)flakes with so far the largest lateral size of up to sub-millimeter scale(~464μm)were yielded.Electrical studies have revealed that the 2D MoO_(2)features metallic properties,with an excellent sheet resistance as low as 99Ω·square^(-1 )at room temperature,and exhibits a property of charge density wave in the measurement of resistivity as a function of temperature.展开更多
Rare earth metal elements include lanthanide elements as well as scandium and yttrium,totaling seventeen metal elements.Due to the wide application prospects of rare earth metal elements in various fields such as lumi...Rare earth metal elements include lanthanide elements as well as scandium and yttrium,totaling seventeen metal elements.Due to the wide application prospects of rare earth metal elements in various fields such as luminescent materials,magnetic materials,catalytic materials,electronic devices,they have an important strategic position.In the field of electrocatalysis,rare earth metal elements have great potential for development due to their unique 4f electron layer structure,spin orbit coupling,high reactivity,controllable coordination number,and rich optical properties.However,there is currently a lack of systematic reviews on the modification strategies of rare earth metal elements and the latest developments in electrocatalysis.Therefore,in order to stimulate the enthusiasm of researchers,this review focuses on the application progress of rare earth metal element modified metal oxides in multiple fields such as wastewater treatment,hydrogen peroxide synthesis,hydrogen evolution reaction(HER),carbon dioxide reduction reaction(CO_(2)RR),nitrogen reduction reaction(NRR)and machine learning assisted research.In depth analysis of its electrocatalytic mechanism in various application scenarios and key factors affecting electrocatalytic performance.This review is of great significance for further developing high-performance and multifunctional electrocatalysts,and is expected to provide strong support for the development of energy,environment,and chemical industries.展开更多
In situ growth of co-catalysts on BiVO_(4)(BVO)to enhance photoelectrochemical(PEC)water splitting performance has been extensively reported.However,the understanding of the synergistic effects among various elements,...In situ growth of co-catalysts on BiVO_(4)(BVO)to enhance photoelectrochemical(PEC)water splitting performance has been extensively reported.However,the understanding of the synergistic effects among various elements,especially at the interface between the semiconductor and cocatalyst,has received insufficient attention.In this study,we report a Co,Ni and Mn trimetallic fluoride-modified BVO photoanode featuring a unique interfacial chemical bond(V-F).Under AM 1.5 G illumination,an exciting photocurrent density of 6.05 mA cm^(-2)was achieved at 1.23 V vs.RHE by the integrated BVO/CoNi_(0.18)Mn_(0.12)(OH)_(x)F photoanode and over 98%of the initial photocurrent was maintained after 10 h of photoelectrolysis.Control experiments and theoretical calculations demonstrate that the V-F interfacial bond stabilizes the Co^(2+)active sites.It serves as a transmission gear,interlinking the migration of interfacial charge and the regeneration of cocatalyst,endowing the photoanode with significant activity and stability.Furthermore,we have systematically elucidated the role of the individual Co,Ni,and Mn components in the synergistic cocatalyst layer.The interfacial modification provides novel insights into developing advanced photoanodes towards PEC water splitting.展开更多
The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating so...The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.展开更多
Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and re...Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and recovery.Therefore,the membrane fixation of catalyst is an important step to realize the actual application of Fenton-like catalysts.In this work,an efficient catalyst was developed with Co-N_(x)configuration facilely reconstructed on the surface of Co_(3)O_(4)(Co-N_(x)/Co_(3)O_(4)),which exhibited superior catalytic activity.We further fixed the highly efficient Co-N_(x)/Co_(3)O_(4)onto three kinds of organic membranes and one kind of inorganic ceramic membrane installing with the residual PMS treatment device to investigate its catalytic stability and sustainability.Results indicated that the inorganic ceramic membrane(CM)can achieve high water flux of 710 L m-2h-1,and the similar water flux can be achieved by Co-N_(x)/Co_(3)O_(4)/CM even without the pressure extraction.We also employed the Co-N_(x)/Co_(3)O_(4)/CM system to the wastewater secondary effluent,and the pollutant in complicated secondary effluent could be highly removed by the Co-N_(x)/Co_(3)O_(4)/CM system.This paper provides a new point of view for the application of metal-based catalysts with M-N_(x)coordination in catalytic reaction device.展开更多
Nitric oxide(NO)modulates several cancer-related physiological processes and has advanced the development of green methods for cancer treatment and integrated platforms for combination or synergistic therapies.Althoug...Nitric oxide(NO)modulates several cancer-related physiological processes and has advanced the development of green methods for cancer treatment and integrated platforms for combination or synergistic therapies.Although a nanoengineering strategy has been proposed to overcome deficiencies of NO gas or small NO donor molecules,such as short half-life,lipophilicity,non-selectivity,and poor stability,it remains challenging to prepare NO nanomedicines with simple composition,multiple functions and enhanced therapeutic efficacy.Herein,we build a liquid metal nanodroplet(LMND)-based NO nanogenerator(LMND@HSG)that is stabilized by a bioreducible guanylated hyperbranched poly(amido amine)(HSG)ligand.Mechanically,the tumor microenvironment specifically triggers a cascade process of glutathione elimination,reactive oxygen species(ROS)generation,and NO release.According to actual demand,the ROS and NO concentrations could be readily controlled by tuning the LMND and HSG feed amounts.Along with the intrinsic anticancer property of LMND(ROS-mediated apoptosis and anti-angiogenesis),LMND@HSG administration could further enhance tumor growth suppression compared with LMND and HSG alone.Fromthis study,leveraging LMND for NO gas therapy provides more possibilities for the prospect of LMND-based anticancer nanomedicines.展开更多
A simple new method based on the measurement of charge pumping technique is proposed to separate and quantify experimentally the effects of oxide-trapped charges and interface-trapped charges on threshold voltage degr...A simple new method based on the measurement of charge pumping technique is proposed to separate and quantify experimentally the effects of oxide-trapped charges and interface-trapped charges on threshold voltage degradation in p-channel metal-oxide-semiconductor field-effect transistors (pMOSFETs) under hot-carrier stress.Further,the experimental results verify the validness of this method.It is shown that,all three mechanisms of electron trapping effect,hole trapping effect and interface trap generation play important roles in p-channel MOSFETs degradation.It is noted that interface-trapped charge is still the dominant mechanism for hot-carrier-induced degradation in p-channel MOSFETs,while a significant contribution of oxide-trapped charge to threshold voltage is demonstrated and quantified.展开更多
基金supported by the National Natural Science Foundation of China (No. 52374292)China Baowu Low Carbon Metallurgy Innovation Foundation, China (No. BWLCF202309)the Natural Science Foundation of Changsha City, China (No. KQ2208271)。
文摘Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.
基金Project(51171211) supported by the National Natural Science Foundation of ChinaProject(NCET-10-0837) supported by the Chinese Ministry of Education's Supportive Program for New Century Excellent Talents in UniversitiesProject(2006BAE03B03) supported by the Chinese National Science and Technology Supportive Program
文摘An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.
文摘Hydrogen is widely regarded as a crucial energy carrier for achieving carbon neutrality and a sustainable future.Direct seawater electrolysis using renewable energy presents a promising approach for large-scale hydrogen production.Reactions of this nature at high current density and Faradaic efficiency are hampered by two challenges.
基金Financial supports from the National Natural Science Foundation(No.21991104 and No.22,278,235)。
文摘Electrocatalysis has emerged as a sustainable approach for the selective oxidation of fatty alcohols to fatty acids,circumventing the environmental concerns associated with conventional routes.However,the low aqueous solubility of hydrophobic fatty alcohols presents a major challenge.While nickel hydroxide(Ni(OH)_(2))serves as a cost-effective catalyst for alcohol oxidation,its hydrophilic nature limits substrate accessibility and mass transport,causing sluggish kinetics and competing oxygen evolution.Herein,we propose a hydrophobic interface engineering strategy via co-electrodeposition of Ni(OH)_(2)with polytetrafluoroethylene(PTFE),fabricating the composite electrode(ED-Ni(OH)_(2)-PTFE).The optimized electrode achieves 95%Faradaic efficiency for octanoic acid at 1.5 V vs.RHE,with a production rate 2–3 times higher than pristine Ni(OH)_(2).Mechanistic studies combining in situ Raman spectroscopy,fluorescence imaging,and coarse-grained molecular dynamics simulations reveal that PTFE selectively enriches octanol at the electrode-electrolyte interface by modulating interfacial hydrophobicity.A continuous-flow microreactor integrating anodic octanol oxidation with cathodic hydrogen evolution reduces cell voltage by~100 m V,achieving simultaneous fatty acid and hydrogen production.This work highlights the critical role of hydrophobic interfacial microenvironment design in organic electrosynthesis,offering a promising strategy for upgrading fatty alcohols under mild conditions.
基金financially supported by the National Natural Science Foundation of China(52072036,52272187)the China Petroleum&Chemical Corporation(SINOPEC)project(223128).
文摘All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for the next-generation energy storage systems.However,interfacial issues between SSEs and Nirich oxide cathode materials,attributed to space charge layer,interfacial side reactions,and mechanical contact failure,significantly restrict the performances of ASSBs.The interface degradation is closely related to the components of the composite cathode and the process of electrode fabrication.Focusing on the influencing factors of interface compatibility between SSEs and Ni-rich oxide cathode,this article systematically discusses how cathode active materials(CAMs),electrolytes,conductive additives,binders,and electrode fabrication impact the interface compatibility.In addition,the strategies for the compatibility modification are reviewed.Furthermore,the challenges and prospects of intensive research on the degradation and modification of the SSE/Ni-rich cathode material interface are discussed.This review is intended to inspire the development of high-energy-density and high-safety all-solid-state batteries.
文摘Following publication of the original article[1],the authors found that they pasted the same data when drawing XRD for sample NCO-1 and NCO-2 in Fig.2a,however,the XRD of all four samples in the manuscript was tested,and XRD raw data were kept and can be offered.The correct Fig.2 has been provided in this Correction.
文摘The front gate interface and oxide traps induced by hot carrier stress in SOI NMOSFETs are studied.Based on a new forward gated diode technique,the R G current originating from the front interface traps is measured,and then the densities of the interface and oxide traps are separated independently.The experimental results show that the hot carrier stress of front channel not only results in the strong generation of the front interface traps,but also in the significant oxide traps.These two kinds of traps have similar characteristic in increasing with the hot carrier stress time.This analysis allows one to obtain a clear physical picture of the effects of the hot carrier stress on the generating of interface and oxide traps,which help to understand the degradation and reliability of the SOI MOSFETs.
基金funding support from General Research Fund[Project No.14300525]from the Research Grants Council(RGC)of Hong Kong SAR,Chinafunding support from Natural Science Foundation of China(NSFC)Young Scientists Fund(Project No.22305203)+2 种基金NSFC Projects Nos.22309123,22422303,22303011,22033002,92261112 and U21A20328support from the Hong Kong Branch of National Precious Metals Material Engineering Research Center(NPMM)at City University of Hong Kongsupport from Young Collaborative Research Grant[Project No.C1003-23Y]support from RGC of Hong Kong SAR,China.
文摘Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances are far from practical needs due to the lack of efficient electrocatalysts.Engineering the lattice of metal-based nanomaterials via phase control has emerged as an effective strategy to modulate their intrinsic electrocatalytic properties.Herein,we realize boron(B)-insertion-induced phase regulation of rhodium(Rh)nanocrystals to obtain amorphous Rh_(4)B nanoparticles(NPs)and hexagonal close-packed(hcp)RhB NPs through a facile wet-chemical method.A high Faradaic efficiency(92.1±1.2%)and NH_(3) yield rate(629.5±11.0μmol h^(−1) cm^(−2))are achieved over hcp RhB NPs,far superior to those of most reported NORR nanocatalysts.In situ spectro-electrochemical analysis and density functional theory simulations reveal that the excellent electrocatalytic performances of hcp RhB NPs are attributed to the upshift of d-band center,enhanced NO adsorption/activation profile,and greatly reduced energy barrier of the rate-determining step.A demonstrative Zn-NO battery is assembled using hcp RhB NPs as the cathode and delivers a peak power density of 4.33 mW cm−2,realizing simultaneous NO removal,NH3 synthesis,and electricity output.
基金supported by the National Natural Science Foundation of China(No.22465009)the Education Department of Guizhou Province(No.2021312)the Foundation of Guizhou Province(No.2019-5666).
文摘Alloying and interface effects are effective strategies for enhancing the performance of electrocatalysts in energy-related devices.Herein,dendritic Au-doped platinum-palladium alloy/dumbbell-like bismuth telluride heterostructures(denoted PtPdAu/BiTe)were synthesized using a visible-light-assisted strategy.The coupling alloy and interfacial effects of PtPdAu/BiTe significantly improved the performance and stability of both the ethanol oxidation reaction(EOR)and methanol oxidation reaction(MOR).Introducing a small amount of Au effectively enhanced the CO tolerance of PtPdAu/BiTe compared to dendritic platinum-palladium alloy/dumbbell-like bismuth telluride heterostructures.PtPdAu/BiTe exhibited mass activities of 31.5 and 13.3 A·mg_(Pt)^(-1)in EOR and MOR,respectively,which were 34.4 and 13.2 times higher than those of commercial Pt black,revealing efficient Pt atom utilization.In-situ Fourier transform infrared spectroscopy demonstrated complete 12e^(-)and 6e^(-)oxidation of ethanol and methanol on PtPdAu/BiTe.The PtPdAu/BiTe/C achieved mass peak power densities of 131 and 156 mW·mg_(Pt)^(-1),which were 2.4 and 2.2 times higher than those of Pt/C in practical direct ethanol fuel cell(DEFC)and direct methanol fuel cell(DMFC),respectively,highlighting their potential application in DEFC and DMFC.This study introduces an effective strategy for designing efficient and highly CO tolerant anodic electrocatalysts for practical DEFC and DMFC applications.
基金financially supported by the National Key R&D Program of China(No.2022YFE0121300)the National Natural Science Foundation of China(No.52374376)the Introduction Plan for High-end Foreign Experts(No.G2023105001L)。
文摘As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.
基金National Natural Science Foundation of China (52073253)。
文摘Solid-state Na metal batteries(SSNBs),known for the low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interfacial contact in solid-state electrolytes has hindered the commercialization of SSNBs.Driven by the concept of intimate electrode-electrolyte interface design,this study employs a combination of sodium-potassium(NaK)alloy and carbon nanotubes to prepare a semi-solid NaK(NKC)anode.Unlike traditional Na anodes,the paintable paste-like NKC anode exhibits superior adhesion and interface compatibility with both current collectors and gel electrolytes,significantly enhancing the physical contact of the electrode-electrolyte interface.Additionally,the filling of SiO_(2) nanoparticles improves the wettability of NaK alloy on gel polymer electrolytes,further achieving a conformal interface contact.Consequently,the overpotential of the NKC symmetric cell is markedly lower than that of the Na symmetric cell when subjected to a long cycle of 300 hrs.The full cell coupled with Na_(3)V_(2)(PO_(4))_(2) cathodes had an initial discharge capacity of 106.8 mAh·g^(-1) with a capacity retention of 89.61%after 300 cycles,and a high discharge capacity of 88.1 mAh·g^(-1) even at a high rate of 10 C.The outstanding electrochemical performance highlights the promising application potential of the NKC electrode.
文摘Practical application of Na_(3)SbS_(4)(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.
基金supported by the National Natural Science Foundation of China(No.62075069 and 52303092)the Water Conservancy Technology project of Hunan Province,China(XSKJ2021000-32)+1 种基金the City University of Hong Kong(#7005507)the Open Project of Yunnan Precious Metals Laboratory Co.,Ltd(grant number YPML-2023050278).
文摘Nowadays,high-stable and ultrasensitive heavy metal detection is of utmost importance in water quality monitoring.Nanoparticle-enhanced laser-induced breakdown spectroscopy(NELIBS)shows high potential in hazardous metal detection,however,encounters unstable and weak signals due to nonuniform distribution of analytes.Herein,we developed an interface self-assembly(ISA)method to create a uniformly distributed gold nanolayer at a liquid-liquid interface for positive heavy metal ions capture and NELIBS analysis.The electrostatically selfassembled Au nanoparticles(NPs)-analytes membrane was prepared at the oil-water interface by injecting ethanol into the mixture of cyclohexane and Au NPs-analytes water solution.Then,the interface self-assembled Au NPs-analytes membrane was transformed onto a laser-processed superhydrophilic Si slide for detection.Three heavy metals(cadmium(Cd),barium(Ba),and chromium(Cr))were analyzed to evaluate the stability and sensitivity of the ISA method for NELIBS.The results(Cd:RSD=3.6%,LoD=0.654 mg/L;Ba:RSD=3.4%,LoD=0.236 mg/L;Cr:RSD=7.7%,LoD=1.367 mg/L)demonstrated signal enhancement and high-stable and ultrasensitive detection.The actual sample detection(Cd:RE=7.71%,Ba:RE=6.78%)illustrated great reliability.The ISA method,creating a uniform distribution of NP-analytes at the interface,has promising prospects in NELIBS.
基金supported by the National Key Research and Development Program of China(Nos.2023YFB3608703 and 2023YFB3608700)Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(Nos.2021ZZ122 and 2020ZZ110)Fujian provincial projects(Nos.2021HZ0114 and 2021J01583).
文摘Two-dimensional(2D)metal oxides(2DMOs),such as MoO_(2),have made impressive strides in recent years,and their applicability in a number of fields such as electronic devices,optoelectronic devices and lasers has been demonstrated.However,2DMOs present challenges in their synthesis using conventional methods due to their non-van der Waals nature.We report that KCl acts as a flux to prepare large-area 2DMOs with sub-millimeter scale.We systematically investigate the effects of temperature,homogeneous time and cooling rate on the products in the flux method,demonstrating that in this reaction a saturated homogenous solution is obtained upon the melting of the salt and precursor.Afterward,the cooling rate was adjusted to regulate the thickness of the target crystals,leading to the precipitation of 2D non-layered material from the supersaturated solution;by applying this method,the highly crystalline non-layered 2D MoO_(2)flakes with so far the largest lateral size of up to sub-millimeter scale(~464μm)were yielded.Electrical studies have revealed that the 2D MoO_(2)features metallic properties,with an excellent sheet resistance as low as 99Ω·square^(-1 )at room temperature,and exhibits a property of charge density wave in the measurement of resistivity as a function of temperature.
基金supported by the National Key Research and Development Program of China(No.2023YFC3708005)The Fundamental Research Funds for the Central Universities,Nankai University(No.63241208)supported by the National Natural Science Foundation of China(Nos.21872102 and 22172080)。
文摘Rare earth metal elements include lanthanide elements as well as scandium and yttrium,totaling seventeen metal elements.Due to the wide application prospects of rare earth metal elements in various fields such as luminescent materials,magnetic materials,catalytic materials,electronic devices,they have an important strategic position.In the field of electrocatalysis,rare earth metal elements have great potential for development due to their unique 4f electron layer structure,spin orbit coupling,high reactivity,controllable coordination number,and rich optical properties.However,there is currently a lack of systematic reviews on the modification strategies of rare earth metal elements and the latest developments in electrocatalysis.Therefore,in order to stimulate the enthusiasm of researchers,this review focuses on the application progress of rare earth metal element modified metal oxides in multiple fields such as wastewater treatment,hydrogen peroxide synthesis,hydrogen evolution reaction(HER),carbon dioxide reduction reaction(CO_(2)RR),nitrogen reduction reaction(NRR)and machine learning assisted research.In depth analysis of its electrocatalytic mechanism in various application scenarios and key factors affecting electrocatalytic performance.This review is of great significance for further developing high-performance and multifunctional electrocatalysts,and is expected to provide strong support for the development of energy,environment,and chemical industries.
文摘In situ growth of co-catalysts on BiVO_(4)(BVO)to enhance photoelectrochemical(PEC)water splitting performance has been extensively reported.However,the understanding of the synergistic effects among various elements,especially at the interface between the semiconductor and cocatalyst,has received insufficient attention.In this study,we report a Co,Ni and Mn trimetallic fluoride-modified BVO photoanode featuring a unique interfacial chemical bond(V-F).Under AM 1.5 G illumination,an exciting photocurrent density of 6.05 mA cm^(-2)was achieved at 1.23 V vs.RHE by the integrated BVO/CoNi_(0.18)Mn_(0.12)(OH)_(x)F photoanode and over 98%of the initial photocurrent was maintained after 10 h of photoelectrolysis.Control experiments and theoretical calculations demonstrate that the V-F interfacial bond stabilizes the Co^(2+)active sites.It serves as a transmission gear,interlinking the migration of interfacial charge and the regeneration of cocatalyst,endowing the photoanode with significant activity and stability.Furthermore,we have systematically elucidated the role of the individual Co,Ni,and Mn components in the synergistic cocatalyst layer.The interfacial modification provides novel insights into developing advanced photoanodes towards PEC water splitting.
基金supported by National Key R&D Program of China(2022YFB3506200,2022YFB3504100)National Natural Science Foundation of China(22072095,22372107,22202058)+3 种基金Excellent Youth Science Foundation of Liaoning Province(2022-YQ-20)Shenyang Science and Technology Planning Project(22-322-3-28)Liaoning Xingliao talented youth Top talent program(XLYC2203007)University Joint Education Project for China-Central and Eastern European Countries(2021097).
文摘The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.
基金supported by National Natural Science Fundation of China(Nos.52170086,22308194,U22A20423)Natural Science Foundation of Shandong Province(No.ZR2021ME013)+1 种基金Taishan Scholars Program of Shandong Province(No.tsqn202211012)Shandong Provincial Excellent Youth(No.ZR2022YQ47)。
文摘Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and recovery.Therefore,the membrane fixation of catalyst is an important step to realize the actual application of Fenton-like catalysts.In this work,an efficient catalyst was developed with Co-N_(x)configuration facilely reconstructed on the surface of Co_(3)O_(4)(Co-N_(x)/Co_(3)O_(4)),which exhibited superior catalytic activity.We further fixed the highly efficient Co-N_(x)/Co_(3)O_(4)onto three kinds of organic membranes and one kind of inorganic ceramic membrane installing with the residual PMS treatment device to investigate its catalytic stability and sustainability.Results indicated that the inorganic ceramic membrane(CM)can achieve high water flux of 710 L m-2h-1,and the similar water flux can be achieved by Co-N_(x)/Co_(3)O_(4)/CM even without the pressure extraction.We also employed the Co-N_(x)/Co_(3)O_(4)/CM system to the wastewater secondary effluent,and the pollutant in complicated secondary effluent could be highly removed by the Co-N_(x)/Co_(3)O_(4)/CM system.This paper provides a new point of view for the application of metal-based catalysts with M-N_(x)coordination in catalytic reaction device.
基金the National Natural Science Foundation of China(22075114,32371434,82301630)the Natural Science Foundation of Jiangsu Province(BK20211034)the financial support from Jiangsu Provincial Medical Key Laboratory(Key Laboratory of Nuclear Medicine).
文摘Nitric oxide(NO)modulates several cancer-related physiological processes and has advanced the development of green methods for cancer treatment and integrated platforms for combination or synergistic therapies.Although a nanoengineering strategy has been proposed to overcome deficiencies of NO gas or small NO donor molecules,such as short half-life,lipophilicity,non-selectivity,and poor stability,it remains challenging to prepare NO nanomedicines with simple composition,multiple functions and enhanced therapeutic efficacy.Herein,we build a liquid metal nanodroplet(LMND)-based NO nanogenerator(LMND@HSG)that is stabilized by a bioreducible guanylated hyperbranched poly(amido amine)(HSG)ligand.Mechanically,the tumor microenvironment specifically triggers a cascade process of glutathione elimination,reactive oxygen species(ROS)generation,and NO release.According to actual demand,the ROS and NO concentrations could be readily controlled by tuning the LMND and HSG feed amounts.Along with the intrinsic anticancer property of LMND(ROS-mediated apoptosis and anti-angiogenesis),LMND@HSG administration could further enhance tumor growth suppression compared with LMND and HSG alone.Fromthis study,leveraging LMND for NO gas therapy provides more possibilities for the prospect of LMND-based anticancer nanomedicines.
文摘A simple new method based on the measurement of charge pumping technique is proposed to separate and quantify experimentally the effects of oxide-trapped charges and interface-trapped charges on threshold voltage degradation in p-channel metal-oxide-semiconductor field-effect transistors (pMOSFETs) under hot-carrier stress.Further,the experimental results verify the validness of this method.It is shown that,all three mechanisms of electron trapping effect,hole trapping effect and interface trap generation play important roles in p-channel MOSFETs degradation.It is noted that interface-trapped charge is still the dominant mechanism for hot-carrier-induced degradation in p-channel MOSFETs,while a significant contribution of oxide-trapped charge to threshold voltage is demonstrated and quantified.
