This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimi...This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimize key structural parameters,including inlet diameter(D_i),overflow pipe diameter(D_(e)),insertion depth(L_(e)),and bottom flow pipe diameter(D_(z)).Numerical simulations employ the Reynolds stress turbulence model,SIMPLEC algorithm,and discrete phase model to evaluate separation performance in a gas-liquid two-phase system.Results indicate that a smaller D_i improves fine particle separation but increases turbulence;an optimal range of D_i/D_(c)=0.35-0.4 is recommended.Larger D_(e) enhances the diversion ratio,aiding fine particle discharge(D_(e)/D_(c)=0.25-0.35).Increased Le facilitates fine particle overflow but induces vortices,whereas a smaller L_(e) stabilizes the bottom flow for larger particle separation(L_(e)/D_(c)=0.5-0.75).A reduced D_(z) enhances centrifugal force and separation efficiency but may cause turbulence;an optimal D_(z)/D_(c) of 0.6-0.65 is suggested for stability.These findings provide valuable design guidelines for improving cyclone separator performance in multiphase flow applications.展开更多
This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle mo...This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle modulation of turbulence. The particles mainly excite the initial instability of the jet and bring about the earlier breakup of vortex rings in the near-field. The flow fluc- tuating intensity either in the axial or in the radial directions is hence increased by particles. The article also describes the mean velocity modulated by particles. The changing statistical velocity induced by particle modulation implies the effects of modulation of the local flow structures. This study is expected to be useful to the control of two-phase turbulent jets.展开更多
After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir develo...After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.展开更多
The sedimentation of cylindrical pollutant particles which fall through a fluid is investigated. Differing from previous research work, particle oscillation and effect of particle on the fluid are considered, and the ...The sedimentation of cylindrical pollutant particles which fall through a fluid is investigated. Differing from previous research work, particle oscillation and effect of particle on the fluid are considered, and the torque exerted on a particle when viscous fluid flow around a particle is got through experiment and included in the numerical simulation. The computational results showed that the sedimentation velocities of particle increase slowly with the increase of particle aspect ratio . For disk like particle, when the motion direction of particle is parallel to axis of particle, particle falls more slowly than the case of perpendicular to axis of particle; while for rod like particle, it is inverse. For sedimentation of a crowd of high frequency oscillating cylindrical particles with arbitrary initial orientation, both vertical velocity and horizontal velocity oscillate dramatically, the degree of oscillation of the former is stronger than the later. A crowd of particles fall more quickly than an isolated particle. Particles tend to strongly align in the direction of gravity. The computational results agreed well with the experimental ones and helpful for controlling of pollutant particles.展开更多
The particle concentration inside a cyclone separator at different operation parameters was simulated with the FLUENT software. The Advanced Reynolds Stress Model （ARSM） was used in gas phase turbulence modeling. St...The particle concentration inside a cyclone separator at different operation parameters was simulated with the FLUENT software. The Advanced Reynolds Stress Model （ARSM） was used in gas phase turbulence modeling. Stochastic Particle Tracking Model （SPTM） and the Particle-Source-In-Cell （PSIC） method were adopted for particles computing. The interaction between particles and the gas phase was also taken into account. The numerical simulation results were in agreement with the experimental data. The simulation revealed that an unsteady spiral dust strand appeared near the cyclone wall and a non-axi-symmetrical dust ring appeared in the annular space and under the cover plate of the cyclone. There were two regions in the radial particle concentration distribution, in which particle concentration was low in the inner region （r/R≤0.75） and increased greatly in the outer region （r/R〉0.75）. Large particles generally had higher concentration in the near-wall region and small particles had higher concentration in the inner swirling flow region. The axial distribution of particle concentration in the inner swirling flow （r/R≤0.3） region showed that there existed serious fine particle entrainment within the height of 0.SD above the dust discharge port and a short-cut flow at a distance of about 0.25D below the entrance of the vortex finder. The dimensionless concentration in the high-concentration region increased obviously in the upper part of the cyclone separation space when inlet particle loading was large. With increasing gas temperature, the particle separation ability of the cyclone was obviously weakened.展开更多
The kinetics of ε-Cu particles dissolution in the matrix during welding of a copper-precipitation strengthening steel was determined by a combination of GleebleTM physical simulation, TEM examination and hardness mea...The kinetics of ε-Cu particles dissolution in the matrix during welding of a copper-precipitation strengthening steel was determined by a combination of GleebleTM physical simulation, TEM examination and hardness meas urement. The ε-Cu particles underwent a coarsening and part dissolution and then complete dissolution reaction as the peak temperature increased from 750 to 1 000℃, which resulted in the decrease in the number density of ε-Cu particles and hardness in the heat affected zone （HAZ）. The results can be used to understand the evolution of this transformation and a softening behavior of the HAZ during welding of this type of steel.展开更多
A mathematical model, accounting for the sulfuric acid and ferric ions diffusion and the copper sulfide mineral leaching process, was developed for an ore particle by considering its porous structure. It was simulated...A mathematical model, accounting for the sulfuric acid and ferric ions diffusion and the copper sulfide mineral leaching process, was developed for an ore particle by considering its porous structure. It was simulated with the simulation tool COMSOL Multiphysics. The simulation results show that the highest acid and ferric concentrations near the particle surface are apparent, while the concentrations in the central particle increase slightly as the less-porous ore core with low permeability prevents the oxidation from penetrating. The extraction of the mineral near the particle surface is the maximum, mainly because of ample sulfuric acid, ferric ions, bacteria, and oxygen available for the leaching process. Because of low oxidation concentration in the central part of the particle, the reaction rate and copper sulphide conversion are small. The simulation shows good agreement with the experimental results.展开更多
The cell model developed since 1950s is a useful tool forexploring the behavior of particle assemblages, but it demandsfurther careful development of the outer boundary conditions so thatinteraction in a particle swar...The cell model developed since 1950s is a useful tool forexploring the behavior of particle assemblages, but it demandsfurther careful development of the outer boundary conditions so thatinteraction in a particle swarm is better represented. In this paper,the cell model and its development were reviewed, and themodifications of outer cell boundary conditions were suggested. Atthe cell outer boundary, the restriction of uniform liquid flow wasremoved in our simulation conducted in the reference frame fixed withthe particle.展开更多
Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid pa...Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid particle movement as well as particle erosion characteristics of the solid-liquid two-phase flow in a choke. The corresponding erosion reduction approach by setting ribs on the inner wall of the choke was advanced. This mathematical model includes three parts： the flow field simulation of the continuous carrier fluid by an Eulerian approach, the particle interaction simulation using the discrete particle hard sphere model by a Lagrangian approach and calculation of erosion rate using semiempirical correlations. The results show that particles accumulated in a narrow region from inlet to outlet of the choke and the dominating factor affecting particle motion is the fluid drag force. As a result, the optimization of rib geometrical parameters indicates that good anti-erosion performance can be achieved by four ribs, each of them with a height （H） of 3 mm and a width （B） of 5 mm equaling the interval between ribs （L）.展开更多
The discrete particle method was used to simulate the distribution of gas holdup in a gas-liquid standard Rushton stirred tank. The gas phase was treated as a large number of bubbles and their trajectories were tracke...The discrete particle method was used to simulate the distribution of gas holdup in a gas-liquid standard Rushton stirred tank. The gas phase was treated as a large number of bubbles and their trajectories were tracked with the results of motion equations. The two-way approach was performed to couple the interphase momentum exchange. The turbulent dispersion of bubbles with a size distribution was modeled using a stochastic tracking model, and the added mass force was involved to account for the effect of bubble acceleration on the surrounding fluid. The predicted gas holdup distribution showed that this method could give reasonable prediction comparable to the reported experimental data when the effect of turbulence was took into account in modification for drag coefficient.展开更多
The low diffusion （LD） particle method, proposed by Burt and Boyd, is modified for the near-continuum two-phase flow simulations. The LD method has the advantages of easily coupling with the direct simulation Monte ...The low diffusion （LD） particle method, proposed by Burt and Boyd, is modified for the near-continuum two-phase flow simulations. The LD method has the advantages of easily coupling with the direct simulation Monte Carlo （DSMC） method for multi-scale flow simulations and dramatically reducing the numerical diffusion error and statistical scatter of the equilibrium particle methods. Liquidor solid-phase particles are introduced in the LD method. Their velocity and temperature updating are respectively, calculated from the motion equation and the temperature equation according to the local gas properties. Coupling effects from condensed phase to gas phase are modeled as momentum and energy sources, which are respectively, equal to the negative values of the total momentum and energy increase in liquid or solid phase. The modified method is compared with theoretical results for unsteady flows, and good agreements are obtained to indicate the reliability of the one-way gas-to-particle coupling models. Hybrid LD-DSMC algorithm is implemented and performed for nozzle discharging gas-liquid flow to show the prospect of the LD-DSMC scheme for multi-scale two-phase flow simulations.展开更多
A three-dimensional,two-phase,five-component mathematical model has been developed to describe flow characteristics of clay particles and flocs in the profile control process,in which the clay particle suspension is i...A three-dimensional,two-phase,five-component mathematical model has been developed to describe flow characteristics of clay particles and flocs in the profile control process,in which the clay particle suspension is injected into the formation to react with residual polymer.This model considers the reaction of clay particles with residual polymer,apparent viscosity of the mixture,retention of clay particles and flocs,as well as the decline in porosity and permeability caused by the retention of clay particles and flocs.A finite difference method is used to discretize the equation for each component in the model.The Runge-Kutta method is used to solve the polymer flow equation,and operator splitting algorithms are used to split the flow equation for clay particles into a hyperbolic equation for convection and a parabolic equation for diffusion,which effectively ensures excellent precision,high speed and good stability.The numerical simulation had been applied successfully in the 4-P1920 unit of the Lamadian Oilfield to forecast the blocking capacity of clay particle suspension and to optimize the injection parameters.展开更多
A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck ...A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck were studied. Effects of geometric parameters of screen deck on banana screening process were also investigated. The results show that when the values of inclination of discharge and increment of screen deck inclination are 10° and 5° respectively, the banana screening process get a good screening performance in the simulation. The relationship between screen deck length and screening efficiency was further confirmed. The conclusion that the screening efficiency will not significantly increase when the deck length L≥430 mm (L/B ≥ 3.5) was obtained, which can provide theoretical basis for the optimization of banana screen.展开更多
Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a ...Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a typical example of these problems. The basis of SPH was reviewed, including some techniques for governing equation resolution, such as the stepping method and the boundary handling method. Then numerical results of a dam breaking simulation were discussed, and the benefits of concepts like artificial viscosity and position correction were analyzed in detail. When compared with dam breaking simulated by the volume of fluid (VOF) method, the wave profile generated by SPH had good agreement, but the pressure had only reasonable agreement. Improving pressure results is clearly an important next step for research.展开更多
Pyrolysis and heat transfer characteristics of single large biomass particle were investigated using threedimensional unsteady heat transfer model coupled with chemical reactions.The consumption of biomass and the pro...Pyrolysis and heat transfer characteristics of single large biomass particle were investigated using threedimensional unsteady heat transfer model coupled with chemical reactions.The consumption of biomass and the production of products were simulated.Some experiments were designed to provide model parameters for simulation calculations.The simulation was verified by pyrolysis experiments of large biomass particle in a vertical tube furnace.The simulation results show the internal heat and mass transfer law during the pyrolysis of large biomass particle.When the biomass particle diameter is between 10 and 30 mm,for every 5 mm increase in particle diameter,the time required for complete pyrolysis will increase on average by about 50 s.When the pyrolysis temperature is between 673 K and 873 K,a slight decrease in the pyrolysis temperature will cause the time required for the biomass to fully pyrolyze to rise significantly.And the phenomenon is more obvious in the low temperature range.The results indicate that the numerical simulation agrees well with the experimental results.展开更多
A numerical method was developed to directly simulate the compressible, particle-laden turbulent jets.The fourth order compact finite difference schemes were used to discretize the space derivatives. The Lagrangian me...A numerical method was developed to directly simulate the compressible, particle-laden turbulent jets.The fourth order compact finite difference schemes were used to discretize the space derivatives. The Lagrangian method was adopted to simulate the particle motion based on one-way coupling. It is found that the turbulent intensity profiles attain self-similar status in the jet downstream regions. At the Stokes number of 1, particles are concentrated largely in the outer boundaries of the large-scale vortex structures with the most uneven distribution and the widest dispersion in the lateral direction. Particles at the much smaller Stokes numbers are distributed evenly in the flow field, and the lateral dispersion is also considerable. Distribution of particles at much larger Stokes numbers is more uniform and the lateral dispersion becomes small. In addition, the inflow conditions have different effects on the particle dispersion. The direct numerical simulation (DNS) results accord with the previous experiments and numerical studies.展开更多
In this paper,a tube erosion caused by the turbulent flow of a dilute particle-laden gas isstudied numerically.Eulerian equations are used to describe the gas-phase motion with the turbulenceviscosity evaluated from a...In this paper,a tube erosion caused by the turbulent flow of a dilute particle-laden gas isstudied numerically.Eulerian equations are used to describe the gas-phase motion with the turbulenceviscosity evaluated from a k-ε model of turbulence.The effect of the turbulence with a stochasticdispersion model has been taken into account for the prediction of impact particle velocity and itstrajectory,The particle impact and rebound model and the erosion model of ductile alloys obtainedby Tabakoff et al.are used to predict the particle rebound phenomena and the erosion suffered bythe tubes.The results obtained in this study include the distributions of particle collision frequencyand erosion of tube surface.展开更多
The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at t...The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at the mesoscopic scale, such as loading frequency, stress amplitude, mean stress, confining pressure and loading sequence, are also investigated with sinusoidal waveform in detail. The related numerical results have demonstrated that： 1） the loading waveform has a certain effect on rock failure processes. The square waveform has the most damage within these waveforms, while the triangle waveform has less damage than sinusoidal waveform. In each cycle, the number of microscopic cracks increases in the loading stage, while it keeps nearly constant in the unloading stage. 2） The loading frequency, stress amplitude, mean stress, confining pressure and loading sequence have considerable effects on rock damage subjected to cyclic loading. The higher the loading frequency, stress amplitude and mean stress, the greater the damage the rock accumulated; in contrast, the lower the confining pressure, the greater the damage the rock has accumulated. 3） There is a threshold value of mean stress and stress amplitude, below which no further damage accumulated after the first few cycle loadings. 4） The high-to-low loading sequence has more damage than the low-to-high loading sequence, suggesting that the rock damage is loading-path dependent.展开更多
For a rectangular planar direct current （DC） magnetron, anomalous target erosion may occur in the curve-out region and inner side of the curved region. One key factor is that the magnetic field in the end region is ...For a rectangular planar direct current （DC） magnetron, anomalous target erosion may occur in the curve-out region and inner side of the curved region. One key factor is that the magnetic field in the end region is weaker than that in the straight region, and another important factor may be that there is a circumferential component of the magnetic field in the curved region. Through a calculation of three-dimensional magnetic field for the rectangular magnetron, a magnet structure shimmed by permanent magnet bars and ferromagnetic bars is proposed to solve the above problems. Through a three-dimensional non-self-consistent particle simulation and the Yamamura/Tawara formula, the target erosion profile could be predicted. The simulation results show that for an improved uniformity in magnetic field, the entire target utilization could be much enhanced.展开更多
Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）,...Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）, and then the injection profiles are significantly modified. At present, research on gelled particles is mainly focused on laboratory studies of drive mechanisms, and rarely on mathematical models describing the blocking process of gelled particles. In this paper, the blocking process of gelled particles is divided into two sub-processes： deposition and desorption due to particle deformation. A mathematical model based on filtration theory is proposed considering the effect of characteristics of gelled particles on the blocking process. Blocking laws were simulated and researched using the mathematical model. Results of the simulation of the blocking of gelled particles are quite consistent with the experimental results, which confirms the reliability of the mathematical model developed.展开更多
基金supported by the National Natural Science Foundation of China(52074341)。
文摘This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimize key structural parameters,including inlet diameter(D_i),overflow pipe diameter(D_(e)),insertion depth(L_(e)),and bottom flow pipe diameter(D_(z)).Numerical simulations employ the Reynolds stress turbulence model,SIMPLEC algorithm,and discrete phase model to evaluate separation performance in a gas-liquid two-phase system.Results indicate that a smaller D_i improves fine particle separation but increases turbulence;an optimal range of D_i/D_(c)=0.35-0.4 is recommended.Larger D_(e) enhances the diversion ratio,aiding fine particle discharge(D_(e)/D_(c)=0.25-0.35).Increased Le facilitates fine particle overflow but induces vortices,whereas a smaller L_(e) stabilizes the bottom flow for larger particle separation(L_(e)/D_(c)=0.5-0.75).A reduced D_(z) enhances centrifugal force and separation efficiency but may cause turbulence;an optimal D_(z)/D_(c) of 0.6-0.65 is suggested for stability.These findings provide valuable design guidelines for improving cyclone separator performance in multiphase flow applications.
基金National Natural Science Foundation of China (50706021)Ph.D.Programs Foundation of Ministry of Education of China (20070003018)TNList Cross-discipline Foundation
文摘This article investigates the near-field dynamics in a particle-laden round turbulent jet in a large-eddy simulation （LES）. A point-force two-way coupling model is adopted in the simulation to reveal the particle modulation of turbulence. The particles mainly excite the initial instability of the jet and bring about the earlier breakup of vortex rings in the near-field. The flow fluc- tuating intensity either in the axial or in the radial directions is hence increased by particles. The article also describes the mean velocity modulated by particles. The changing statistical velocity induced by particle modulation implies the effects of modulation of the local flow structures. This study is expected to be useful to the control of two-phase turbulent jets.
基金funded by the 14th Five-Year Plan Major Science and Technology Project of CNOOC project number KJGG2021-0506.
文摘After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.
基金TheNationalNaturalSciencesFoundationforOutstandingYouthofChina (No .1 992 52 1 0 )
文摘The sedimentation of cylindrical pollutant particles which fall through a fluid is investigated. Differing from previous research work, particle oscillation and effect of particle on the fluid are considered, and the torque exerted on a particle when viscous fluid flow around a particle is got through experiment and included in the numerical simulation. The computational results showed that the sedimentation velocities of particle increase slowly with the increase of particle aspect ratio . For disk like particle, when the motion direction of particle is parallel to axis of particle, particle falls more slowly than the case of perpendicular to axis of particle; while for rod like particle, it is inverse. For sedimentation of a crowd of high frequency oscillating cylindrical particles with arbitrary initial orientation, both vertical velocity and horizontal velocity oscillate dramatically, the degree of oscillation of the former is stronger than the later. A crowd of particles fall more quickly than an isolated particle. Particles tend to strongly align in the direction of gravity. The computational results agreed well with the experimental ones and helpful for controlling of pollutant particles.
基金Supported by the National Key Project of Basic Research of the Ministry for Science and Technology of P. R. China (Grant No. 2005CB22120103)
文摘The particle concentration inside a cyclone separator at different operation parameters was simulated with the FLUENT software. The Advanced Reynolds Stress Model （ARSM） was used in gas phase turbulence modeling. Stochastic Particle Tracking Model （SPTM） and the Particle-Source-In-Cell （PSIC） method were adopted for particles computing. The interaction between particles and the gas phase was also taken into account. The numerical simulation results were in agreement with the experimental data. The simulation revealed that an unsteady spiral dust strand appeared near the cyclone wall and a non-axi-symmetrical dust ring appeared in the annular space and under the cover plate of the cyclone. There were two regions in the radial particle concentration distribution, in which particle concentration was low in the inner region （r/R≤0.75） and increased greatly in the outer region （r/R〉0.75）. Large particles generally had higher concentration in the near-wall region and small particles had higher concentration in the inner swirling flow region. The axial distribution of particle concentration in the inner swirling flow （r/R≤0.3） region showed that there existed serious fine particle entrainment within the height of 0.SD above the dust discharge port and a short-cut flow at a distance of about 0.25D below the entrance of the vortex finder. The dimensionless concentration in the high-concentration region increased obviously in the upper part of the cyclone separation space when inlet particle loading was large. With increasing gas temperature, the particle separation ability of the cyclone was obviously weakened.
文摘The kinetics of ε-Cu particles dissolution in the matrix during welding of a copper-precipitation strengthening steel was determined by a combination of GleebleTM physical simulation, TEM examination and hardness meas urement. The ε-Cu particles underwent a coarsening and part dissolution and then complete dissolution reaction as the peak temperature increased from 750 to 1 000℃, which resulted in the decrease in the number density of ε-Cu particles and hardness in the heat affected zone （HAZ）. The results can be used to understand the evolution of this transformation and a softening behavior of the HAZ during welding of this type of steel.
基金supported by the National Natural Science Foundation of China(Nos.50934002 and 50774011)the program for New Century Excellent Talents in Chinese Universities(NECT-07-0070)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education(No.20070008038)the China Postdoctoral Science Foundation(No.20090450014).]
文摘A mathematical model, accounting for the sulfuric acid and ferric ions diffusion and the copper sulfide mineral leaching process, was developed for an ore particle by considering its porous structure. It was simulated with the simulation tool COMSOL Multiphysics. The simulation results show that the highest acid and ferric concentrations near the particle surface are apparent, while the concentrations in the central particle increase slightly as the less-porous ore core with low permeability prevents the oxidation from penetrating. The extraction of the mineral near the particle surface is the maximum, mainly because of ample sulfuric acid, ferric ions, bacteria, and oxygen available for the leaching process. Because of low oxidation concentration in the central part of the particle, the reaction rate and copper sulphide conversion are small. The simulation shows good agreement with the experimental results.
基金Supported by the National Natural Science Foundation of China (No. 29836130).
文摘The cell model developed since 1950s is a useful tool forexploring the behavior of particle assemblages, but it demandsfurther careful development of the outer boundary conditions so thatinteraction in a particle swarm is better represented. In this paper,the cell model and its development were reviewed, and themodifications of outer cell boundary conditions were suggested. Atthe cell outer boundary, the restriction of uniform liquid flow wasremoved in our simulation conducted in the reference frame fixed withthe particle.
基金supported by the Fund of Innovation Research Group of National Natural Science Foundation of China (Grant NO.5052160450323001)Major Program of National Natural Science Foundation of China (Grant No.50536020)
文摘Chokes are one of the most important components of downhole flow-control equipment. The particle erosion mathematical model, which considers particle-particle interaction, was established and used to simulate solid particle movement as well as particle erosion characteristics of the solid-liquid two-phase flow in a choke. The corresponding erosion reduction approach by setting ribs on the inner wall of the choke was advanced. This mathematical model includes three parts： the flow field simulation of the continuous carrier fluid by an Eulerian approach, the particle interaction simulation using the discrete particle hard sphere model by a Lagrangian approach and calculation of erosion rate using semiempirical correlations. The results show that particles accumulated in a narrow region from inlet to outlet of the choke and the dominating factor affecting particle motion is the fluid drag force. As a result, the optimization of rib geometrical parameters indicates that good anti-erosion performance can be achieved by four ribs, each of them with a height （H） of 3 mm and a width （B） of 5 mm equaling the interval between ribs （L）.
基金Supported by the National Natural Science Foundation of China （No.20776121） and the Specialized Research Fund for the Doctoral Program of Higher Education （No.20050530001）, and the Scientific Research Fund of Hunan Provincial Education Department （No.07C765）.
文摘The discrete particle method was used to simulate the distribution of gas holdup in a gas-liquid standard Rushton stirred tank. The gas phase was treated as a large number of bubbles and their trajectories were tracked with the results of motion equations. The two-way approach was performed to couple the interphase momentum exchange. The turbulent dispersion of bubbles with a size distribution was modeled using a stochastic tracking model, and the added mass force was involved to account for the effect of bubble acceleration on the surrounding fluid. The predicted gas holdup distribution showed that this method could give reasonable prediction comparable to the reported experimental data when the effect of turbulence was took into account in modification for drag coefficient.
文摘The low diffusion （LD） particle method, proposed by Burt and Boyd, is modified for the near-continuum two-phase flow simulations. The LD method has the advantages of easily coupling with the direct simulation Monte Carlo （DSMC） method for multi-scale flow simulations and dramatically reducing the numerical diffusion error and statistical scatter of the equilibrium particle methods. Liquidor solid-phase particles are introduced in the LD method. Their velocity and temperature updating are respectively, calculated from the motion equation and the temperature equation according to the local gas properties. Coupling effects from condensed phase to gas phase are modeled as momentum and energy sources, which are respectively, equal to the negative values of the total momentum and energy increase in liquid or solid phase. The modified method is compared with theoretical results for unsteady flows, and good agreements are obtained to indicate the reliability of the one-way gas-to-particle coupling models. Hybrid LD-DSMC algorithm is implemented and performed for nozzle discharging gas-liquid flow to show the prospect of the LD-DSMC scheme for multi-scale two-phase flow simulations.
基金support from the National High Technology Research and Development Program of China (863 Program) ( 2007AA06200)"Taishan Scholars" Construction Project (No. ts20070704)
文摘A three-dimensional,two-phase,five-component mathematical model has been developed to describe flow characteristics of clay particles and flocs in the profile control process,in which the clay particle suspension is injected into the formation to react with residual polymer.This model considers the reaction of clay particles with residual polymer,apparent viscosity of the mixture,retention of clay particles and flocs,as well as the decline in porosity and permeability caused by the retention of clay particles and flocs.A finite difference method is used to discretize the equation for each component in the model.The Runge-Kutta method is used to solve the polymer flow equation,and operator splitting algorithms are used to split the flow equation for clay particles into a hyperbolic equation for convection and a parabolic equation for diffusion,which effectively ensures excellent precision,high speed and good stability.The numerical simulation had been applied successfully in the 4-P1920 unit of the Lamadian Oilfield to forecast the blocking capacity of clay particle suspension and to optimize the injection parameters.
基金financial support from the National Natural Science Foundation of China (No. 51204181)the Research Fund for the Doctoral Program of Higher Education of China (No. 20110095120004)+2 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Fundamental Research Funds for the Central Universities (Nos. 2011QNA10 and 2010QNB17)the China Postdoctoral Science Foundation (No. 20110491485)
文摘A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck were studied. Effects of geometric parameters of screen deck on banana screening process were also investigated. The results show that when the values of inclination of discharge and increment of screen deck inclination are 10° and 5° respectively, the banana screening process get a good screening performance in the simulation. The relationship between screen deck length and screening efficiency was further confirmed. The conclusion that the screening efficiency will not significantly increase when the deck length L≥430 mm (L/B ≥ 3.5) was obtained, which can provide theoretical basis for the optimization of banana screen.
基金Supported by the National Natural Science Foundation of China under Grant No. 10572041 and 50779008
文摘Smoothed particle hydrodynamics (SPH) is a Lagrangian meshless particle method. It is one of the best method for simulating violent free surface flows in fluids and solving large fluid deformations. Dam breaking is a typical example of these problems. The basis of SPH was reviewed, including some techniques for governing equation resolution, such as the stepping method and the boundary handling method. Then numerical results of a dam breaking simulation were discussed, and the benefits of concepts like artificial viscosity and position correction were analyzed in detail. When compared with dam breaking simulated by the volume of fluid (VOF) method, the wave profile generated by SPH had good agreement, but the pressure had only reasonable agreement. Improving pressure results is clearly an important next step for research.
基金supported by the National Key Research and Development Program of China (Grand No. 2019YFD1100602)the National Natural Science Fund for Excellent Young Scholar of China (Grant No. 51822604)+1 种基金the National Natural Foundation of China (Grand No. 51676045)the Natural Science Fund of Jiangsu Province for Distinguished Young Scholar (Grand No. BK20180014)。
文摘Pyrolysis and heat transfer characteristics of single large biomass particle were investigated using threedimensional unsteady heat transfer model coupled with chemical reactions.The consumption of biomass and the production of products were simulated.Some experiments were designed to provide model parameters for simulation calculations.The simulation was verified by pyrolysis experiments of large biomass particle in a vertical tube furnace.The simulation results show the internal heat and mass transfer law during the pyrolysis of large biomass particle.When the biomass particle diameter is between 10 and 30 mm,for every 5 mm increase in particle diameter,the time required for complete pyrolysis will increase on average by about 50 s.When the pyrolysis temperature is between 673 K and 873 K,a slight decrease in the pyrolysis temperature will cause the time required for the biomass to fully pyrolyze to rise significantly.And the phenomenon is more obvious in the low temperature range.The results indicate that the numerical simulation agrees well with the experimental results.
基金Supported by the Natural Science Foundation of Zhejiang Province (No. 502047 and No. M503094)National Basic Research Program of China (No. 2003CB214500).
文摘A numerical method was developed to directly simulate the compressible, particle-laden turbulent jets.The fourth order compact finite difference schemes were used to discretize the space derivatives. The Lagrangian method was adopted to simulate the particle motion based on one-way coupling. It is found that the turbulent intensity profiles attain self-similar status in the jet downstream regions. At the Stokes number of 1, particles are concentrated largely in the outer boundaries of the large-scale vortex structures with the most uneven distribution and the widest dispersion in the lateral direction. Particles at the much smaller Stokes numbers are distributed evenly in the flow field, and the lateral dispersion is also considerable. Distribution of particles at much larger Stokes numbers is more uniform and the lateral dispersion becomes small. In addition, the inflow conditions have different effects on the particle dispersion. The direct numerical simulation (DNS) results accord with the previous experiments and numerical studies.
基金Supported by the National Natural Science Foundation of China.
文摘In this paper,a tube erosion caused by the turbulent flow of a dilute particle-laden gas isstudied numerically.Eulerian equations are used to describe the gas-phase motion with the turbulenceviscosity evaluated from a k-ε model of turbulence.The effect of the turbulence with a stochasticdispersion model has been taken into account for the prediction of impact particle velocity and itstrajectory,The particle impact and rebound model and the erosion model of ductile alloys obtainedby Tabakoff et al.are used to predict the particle rebound phenomena and the erosion suffered bythe tubes.The results obtained in this study include the distributions of particle collision frequencyand erosion of tube surface.
基金Projects(11702235,51641905,41472269) supported by the National Natural Science Foundation of ChinaProject(2017JJ3290) supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(17C1540) supported by the Scientific Research Foundation of Education Department of Hunan Province,ChinaProject(16GES07) supported by the Open Research Fund of Hunan Key Laboratory of Geomechanics and Engineering Safety,China
文摘The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at the mesoscopic scale, such as loading frequency, stress amplitude, mean stress, confining pressure and loading sequence, are also investigated with sinusoidal waveform in detail. The related numerical results have demonstrated that： 1） the loading waveform has a certain effect on rock failure processes. The square waveform has the most damage within these waveforms, while the triangle waveform has less damage than sinusoidal waveform. In each cycle, the number of microscopic cracks increases in the loading stage, while it keeps nearly constant in the unloading stage. 2） The loading frequency, stress amplitude, mean stress, confining pressure and loading sequence have considerable effects on rock damage subjected to cyclic loading. The higher the loading frequency, stress amplitude and mean stress, the greater the damage the rock accumulated; in contrast, the lower the confining pressure, the greater the damage the rock has accumulated. 3） There is a threshold value of mean stress and stress amplitude, below which no further damage accumulated after the first few cycle loadings. 4） The high-to-low loading sequence has more damage than the low-to-high loading sequence, suggesting that the rock damage is loading-path dependent.
文摘For a rectangular planar direct current （DC） magnetron, anomalous target erosion may occur in the curve-out region and inner side of the curved region. One key factor is that the magnetic field in the end region is weaker than that in the straight region, and another important factor may be that there is a circumferential component of the magnetic field in the curved region. Through a calculation of three-dimensional magnetic field for the rectangular magnetron, a magnet structure shimmed by permanent magnet bars and ferromagnetic bars is proposed to solve the above problems. Through a three-dimensional non-self-consistent particle simulation and the Yamamura/Tawara formula, the target erosion profile could be predicted. The simulation results show that for an improved uniformity in magnetic field, the entire target utilization could be much enhanced.
基金supported by the National HighTechnology Research and Development Program of China(863 Program)(2007AA06Z214)"Taishan Scholars"Construction Project(No.ts20070704).
文摘Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）, and then the injection profiles are significantly modified. At present, research on gelled particles is mainly focused on laboratory studies of drive mechanisms, and rarely on mathematical models describing the blocking process of gelled particles. In this paper, the blocking process of gelled particles is divided into two sub-processes： deposition and desorption due to particle deformation. A mathematical model based on filtration theory is proposed considering the effect of characteristics of gelled particles on the blocking process. Blocking laws were simulated and researched using the mathematical model. Results of the simulation of the blocking of gelled particles are quite consistent with the experimental results, which confirms the reliability of the mathematical model developed.
