The melt memory effect is a widely observed phenomenon in semi-crystalline polymers. In practical applications, various additives are usually introduced into polymers, which may affect their melt memory behavior. In t...The melt memory effect is a widely observed phenomenon in semi-crystalline polymers. In practical applications, various additives are usually introduced into polymers, which may affect their melt memory behavior. In this work, the effect of talc on the melt memory effect of metallocene-made isotactic polypropylene(M-PP) was investigated in detail by using the differential scanning calorimetry. The results indicated that the introduction of talc significantly strengthened the melt memory effect of M-PP. Specifically, the upper limit temperature of Domain II increased from 161 ℃ to 174 ℃, resulting in a substantial widening of the temperature range of Domain IIa from 1 ℃ to 14 ℃. Analysis of the crystal orientation of the M-PP containing talc cooled from various Ts suggested that the remarkably enhanced melt memory effect could be ascribed to the stabilization of oriented nuclei facilitated by talc. This stabilizing effect was likely attributable to the prefreezing effect or the sorption interaction between talc and the M-PP chains.展开更多
In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transfo...In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transformation. The microstructures and superelasticity behavior of the fibers were studied via scanning electron microscopy（SEM） and a dynamic mechanical analyzer（DMA）, respectively. Appropriate heat treatment further improves the plasticity of Cu-based alloys. The serration behavior observed during the loading process is due to the multiple martensite phase transformation.展开更多
Stereocomplex-type polylactide(SC-PLA)consisting of alternatively arranged poly(L-lactide)(PLLA)and poly(D-lactide)(PDLA)chains has gained a good reputation as a sustainable engineering plastic with outstanding heat r...Stereocomplex-type polylactide(SC-PLA)consisting of alternatively arranged poly(L-lactide)(PLLA)and poly(D-lactide)(PDLA)chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide)(PDLLA)into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability(i.e.,the stability of PLLA/PDLA chain assemblies upon melting)could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt%PDLLA having weight-average molecular weight of above 1×10^(5)g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.展开更多
Blending of poly(levorotatory-lactic acid) (PLLA) and poly(dextrorotatory-lactic acid) (PDLA) produces the stereocomplex crystallites (PLA SC), which present higher melting temperature and mechanical properties than t...Blending of poly(levorotatory-lactic acid) (PLLA) and poly(dextrorotatory-lactic acid) (PDLA) produces the stereocomplex crystallites (PLA SC), which present higher melting temperature and mechanical properties than that of neat PLLA or PDLA. However, in the PLLA/PDLA blends with higher molecular weights, the phase separation occurs and the SC exhibits weak memory after melting, which lead to a small amount of SC together with a large amount of homochiral crystallites (HC) develop during crystallization from the melt. In this study, a small content of graphite oxide was blended with PLLA and PDLA to form ternary blends, and it was exciting to find that the formation of SC was enhanced gradually with the content of graphite oxide. The SC exclusively developed when 2 wt% graphite oxide was incorporated into the PLLA/PDLA, and the crystallinity with ∼50% was received even during fast cooling from the melt (−50 ℃/min). The acceleration formation of SC was speculated due to the interaction between PLA molecular chains and the hydroxyl groups on the surface of graphite oxide and the obstruction of proliferation of graphite oxide.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 51973037 and 52173056)PetroChina Company Limited,China。
文摘The melt memory effect is a widely observed phenomenon in semi-crystalline polymers. In practical applications, various additives are usually introduced into polymers, which may affect their melt memory behavior. In this work, the effect of talc on the melt memory effect of metallocene-made isotactic polypropylene(M-PP) was investigated in detail by using the differential scanning calorimetry. The results indicated that the introduction of talc significantly strengthened the melt memory effect of M-PP. Specifically, the upper limit temperature of Domain II increased from 161 ℃ to 174 ℃, resulting in a substantial widening of the temperature range of Domain IIa from 1 ℃ to 14 ℃. Analysis of the crystal orientation of the M-PP containing talc cooled from various Ts suggested that the remarkably enhanced melt memory effect could be ascribed to the stabilization of oriented nuclei facilitated by talc. This stabilizing effect was likely attributable to the prefreezing effect or the sorption interaction between talc and the M-PP chains.
基金financial support of the National High Technology Research and Development Program of China (No. 2009AA03Z113)the National Science Foundation of China (No. 51471025)
文摘In the paper, a melt extraction method was used to fabricate Cu–4Ni–14Al（wt%） fiber materials with diameters between 50 and 200 μm. The fibers exhibited superelasticity and temperature-induced martensitic transformation. The microstructures and superelasticity behavior of the fibers were studied via scanning electron microscopy（SEM） and a dynamic mechanical analyzer（DMA）, respectively. Appropriate heat treatment further improves the plasticity of Cu-based alloys. The serration behavior observed during the loading process is due to the multiple martensite phase transformation.
基金financially supported by the National Natural Science Foundation of China(No.51873129)。
文摘Stereocomplex-type polylactide(SC-PLA)consisting of alternatively arranged poly(L-lactide)(PLLA)and poly(D-lactide)(PDLA)chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide)(PDLLA)into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability(i.e.,the stability of PLLA/PDLA chain assemblies upon melting)could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt%PDLLA having weight-average molecular weight of above 1×10^(5)g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.
基金financially supported by the National Natural Science Foundation of China (Nos. 51403089 and 21574060)the Major Special Projects of Jiangxi Provincial Department of Science and Technology (No. 20114ABF05100)+5 种基金the Project of Jiangxi Provincial Department of Education (No. GJJ170229)the China Postdoctoral Science Foundation (No. 2019M652282)the Postdoctoral Science Foundation of Jiangxi Province (No. 2018KY37)the Technology Plan Landing Project of Jiangxi Provincial Department of Education (No. GCJ2011-243)the Science Foundation for Excellent Young Scholars of Jiangxi Province (No. 20202ZDB01003)the Science foundation of Jiangxi Province (No. 20202BAB203008)
文摘Blending of poly(levorotatory-lactic acid) (PLLA) and poly(dextrorotatory-lactic acid) (PDLA) produces the stereocomplex crystallites (PLA SC), which present higher melting temperature and mechanical properties than that of neat PLLA or PDLA. However, in the PLLA/PDLA blends with higher molecular weights, the phase separation occurs and the SC exhibits weak memory after melting, which lead to a small amount of SC together with a large amount of homochiral crystallites (HC) develop during crystallization from the melt. In this study, a small content of graphite oxide was blended with PLLA and PDLA to form ternary blends, and it was exciting to find that the formation of SC was enhanced gradually with the content of graphite oxide. The SC exclusively developed when 2 wt% graphite oxide was incorporated into the PLLA/PDLA, and the crystallinity with ∼50% was received even during fast cooling from the melt (−50 ℃/min). The acceleration formation of SC was speculated due to the interaction between PLA molecular chains and the hydroxyl groups on the surface of graphite oxide and the obstruction of proliferation of graphite oxide.
