Phospahting coated WE43 magnesium alloy was prepared by an immersion method. The microstructure, corrosion resistance and biocompatibility of the coated alloy were investigated. Scanning electron microscopy （SEM） an...Phospahting coated WE43 magnesium alloy was prepared by an immersion method. The microstructure, corrosion resistance and biocompatibility of the coated alloy were investigated. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to examine the microstructure and the composition of the coated alloy. The corrosion resistance was studied by means of potentiodynamic polarization method and the biocompatibility of the surface modified WE43 alloy was evaluated by （3-（4,5）-Dimethylthiazol-2, yl）-2,5-diphenyltetrazolium bromide （MTT） and hemolysis test. The results show that the phosphating coating can enhance the corrosion resistance of WE43 alloy and can be a good candidate to increase the biocompatibility of WE43 alloy.展开更多
Silicate sol post-treatment was applied to form a complete composite coating on the phosphated zinc layer. The chemical compositions of the coatings were investigated using XPS. The coated samples were firstly scratch...Silicate sol post-treatment was applied to form a complete composite coating on the phosphated zinc layer. The chemical compositions of the coatings were investigated using XPS. The coated samples were firstly scratched and then exposed to the neutral salt spray(NSS) chamber for different time. The microstructure and chemical compositions of the scratches were studied using SEM and EDS. And the non-scratched coated samples were compared. The self-healing mechanism of the composite coatings was discussed. The results show that during corrosion, the self-healing ions in composite coatings dissolve, diffuse and transfer to the scratches or the defects, and then recombine with Zn2+ to form insoluble compound, which deposits and covers the exposed zinc. The corrosion products on the scratches contain silicon, phosphorous, oxygen, chloride and zinc, and they are compact, fine, needle and flake, effectively inhibiting the corrosion formation and expansion of the exposed zinc layer. The composite coatings have good self-healing ability.展开更多
Hydroxylamine sulfate （HAS） and sodium nitrite are used as the accelerators for zinc phos- phate coating on high carbon steel. Phase evolution of phosphate coating was investigated by X-ray diffraction. It is found ...Hydroxylamine sulfate （HAS） and sodium nitrite are used as the accelerators for zinc phos- phate coating on high carbon steel. Phase evolution of phosphate coating was investigated by X-ray diffraction. It is found that the phosphating coatings are mainly composed of hopeite Zn3Fe（PO4）2.4H2O and phosphophyllite Zn2Fe（PO4）2.4H2O. The microstructural changes of the phosphate coating, as a function of phosphating time, were evaluated by scanning elec- tron microscopy. Four-ball friction experiments reveal that hydroxylamine sulfate instead of sodium nitrite can effectively reduce the friction coefficient of lubricated phosphating coat- ing. Therefore, it may be expected that HAS will be widely used as a fast and ECO-friendly accelerator in phosphate industry.展开更多
To improve the corrosion resistance of phosphate coatings, the phosphated hot-dip galvanized (HDG) steel was post-sealed with cerium nitrate solution. The morphology, composition, corrosion resistance of the coatings ...To improve the corrosion resistance of phosphate coatings, the phosphated hot-dip galvanized (HDG) steel was post-sealed with cerium nitrate solution. The morphology, composition, corrosion resistance of the coatings was investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and neutral salt spray (NSS) tests. The results show that after post-sealing the phosphated HDG samples with cerium nitrate solution, the pores among the zinc phosphate crystals are sealed by the compounds containing phosphorus, oxygen and cerium; the zinc phosphate crystals are covered by the flocculent cerium compounds; and the continuous composite coatings are formed on HDG steel. The corrosion resistance of the composite coatings, which increases with the increase in phosphating time and cerium nitrate post-sealing time, is far higher than that of the single phosphate coatings. The composite coatings with the optimal corrosion resistance are obtained for phosphating 300 s and post-sealing 300 s; and the corrosion resistance is more outstanding than that of the chromate coatings.展开更多
Zinc phosphate coating formed on 6061-A1 alloy was studied with the help of electrochemical measurements, Fourier Transform Infrared （FTIR）, and Scanning Electron Microscopy （SEM）, after dipping it in phosphating ...Zinc phosphate coating formed on 6061-A1 alloy was studied with the help of electrochemical measurements, Fourier Transform Infrared （FTIR）, and Scanning Electron Microscopy （SEM）, after dipping it in phosphating solutions containing different concentrations of Rare Earth Nitrate （REN）. REN, which acted as an accelerator in the phosphating solution, could catalyze the surface reaction and accelerate the phosphating process. REN mainly enabled the P in the phosphate coating to exist in the form of PO4^3- and promoted the hydrolysis of phosphatic acid in a liquid layer at the cathodes. This resulted in the evolution of H2 at the cathodes, which increased the local pH value and in turn drove the precipitation of the phosphate coating. Additionally, REN was adsorbed on the surface of the aluminum substrates to form a gel during the phosphating process. These gel particles were good crystal seeds, which helped to form phosphate crystal nuclei and possess the function of a nucleation agent that could decrease the phosphate crystal size. The corrosion resistance of the formed zinc phosphate coatings was improved.展开更多
The phosphated and cerium nitrate post-sealed galvanized steel was firstly scratched to expose zinc layer and then placed in neutral salt spray （NSS） chamber for different durations. The microstructure and compositi...The phosphated and cerium nitrate post-sealed galvanized steel was firstly scratched to expose zinc layer and then placed in neutral salt spray （NSS） chamber for different durations. The microstructure and compositions of the scratches were investigated using SEM and EDS. The phases of the corrosion products were examined through XRD. The self-healing mechanism of the composite coatings was discussed. The experimental results show that the composite coatings have an excellent corrosion resistance. The corrosion products increase with corrosion time and finally cover the whole scratch. They contain phosphorous, cerium, oxygen, chloride and zinc, and are fine needle and exceedingly compact. The composite coatings are favorable self-healing. During corrosion, the self-healing ions such as Ce3＋, Ce4＋, PO43-, Zn2＋ in the composite coatings were dissolved, migrated, recombined, and covered the exposed zinc, impeding zinc corrosion. The self-healing process of the scratches on the composite coatings can be divided into three stages, about 2 h, 4 h, and 24 h, respectively.展开更多
The corrosion behavior of a NdFeB magnet obtained at room temperature,with and without ultrasonic were investigated.The corrosion resistance was investigated by corrosion immersion tests in 3 wt%neutral NaCl solutions...The corrosion behavior of a NdFeB magnet obtained at room temperature,with and without ultrasonic were investigated.The corrosion resistance was investigated by corrosion immersion tests in 3 wt%neutral NaCl solutions,potentiodynamic polarization tests and electrochemical impedance spectroscopy(EIS).The morphology of the conversion coatings on NdFeB surface were analyzed by scanning electron microscopy(SEM).And the forming mechanism of coatings was studied by potential-time curves.The tests of corrosion resistances show that the combination of phosphating treatment with ultrasonic will further improve the corrosion resistance of the NdFeB.The SEM also confirms that phosphating coating under ultrasonic is more homogeneous and compact.展开更多
Zinc phosphate coatings formed on 6061-Al alloy, after dipping in phosphating solutions containing different amounts of Y2O3（yttrium oxide）, were studied by scanning electron microscopy （SEM）, X-ray diffraction （...Zinc phosphate coatings formed on 6061-Al alloy, after dipping in phosphating solutions containing different amounts of Y2O3（yttrium oxide）, were studied by scanning electron microscopy （SEM）, X-ray diffraction （XRD） and electrochemical measurements. Significant variations in the morphology and corrosion resistance afforded by zinc phosphate coating were especially observed as Y2O3 in phosphating solution varied from 0 to 40 mg/L. The addition of Y2O3 changed the initial potential of the interface between aluminum alloy substrate and phosphating solution and increased the number of nucleation sites. The phosphate coating thereby was less porous structure and covered the surface of aluminum alloy completely within short phosphating time. Phosphate coating was mainly composed of Zn3（PO4）2·4H2O （hopeite） and AlPO4（aluminum phosphate）. Y2O3, as an additive of phosphatization, accelerated precipitation and refined the gain size of phosphate coating. The corrosion resistance of zinc phosphate coating in 3% NaCl solution was improved as shown by polarization measurement. In the present research, the optimal amount of Y2O3 was 10-20 mg/L, and the optimal phosphating time was 600 s.展开更多
Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selectiv...Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.展开更多
Designing non-noble metal electrocatalysts toward alkaline hydrogen evolution reaction(HER)with high performance at a large current density is urgent.Herein,a CoO/CoP heterostructure catalyst(termed POZ)was designed b...Designing non-noble metal electrocatalysts toward alkaline hydrogen evolution reaction(HER)with high performance at a large current density is urgent.Herein,a CoO/CoP heterostructure catalyst(termed POZ)was designed by a phosphating strategy.The strong electron transfer on the interface of CoO/CoP was experimentally and theoretically proven.POZ showed a low overpotential of 236 mV at 400 mA/cm^(2),which was 249 mV lower than non-phosphated sample.It also exhibited a remarkable solar-to-hydrogen conversion efficiency of 10.5%.In this work,the construction of CoO/CoP interface realized by a simple phosphating strategy could provide an important reference to boost the HER performance on those materials not merely metal oxides.展开更多
Zinc phosphate films were formed on AZ31 magnesium alloy by immersing into a phosphatation bath to enhance the corrosion resistance of AZ31. Different films were prepared by changing the processing parameters such as ...Zinc phosphate films were formed on AZ31 magnesium alloy by immersing into a phosphatation bath to enhance the corrosion resistance of AZ31. Different films were prepared by changing the processing parameters such as immersing time and temperature. The corrosion protection of the coatings was studied by electrochemical measurements such as electrochemical impedance spectroscopy, potentiodynamic polarization curves, and the structure of the films were studied by metalloscopy and X-ray diffraction (XRD). The results show that, the film formed at 80 ℃, 10 min has the highest corrosion resistance. The XRD patterns show that the film consists of hopeite (Zn3(PO4)2·xH2O).展开更多
The phosphated hot-dip galvanized(HDG) sheets were post-sealed with sodium molybdate solution to improve the corrosion resistance of phosphate coatings. The morphology,chemical composition and corrosion resistance of ...The phosphated hot-dip galvanized(HDG) sheets were post-sealed with sodium molybdate solution to improve the corrosion resistance of phosphate coatings. The morphology,chemical composition and corrosion resistance of the coatings were investigated using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Tafel polarization measurements and neutral salt spray(NSS) tests,and were compared with those of the single coatings. The results show that post-sealing the phosphated HDG steel with molybdate solution,the pores among the zinc phosphate crystals are sealed with molybdate films containing Zn,P,O and Mo,and the continuous composite coatings are formed. The suppression of both the anodic and the cathodic processes of zinc corrosion on the samples are enhanced significantly. The synergistic corrosion protection effect of the single phosphate coatings and molybdate films for zinc is evident. The corrosion resistance of the composite coatings increases with phosphating time up to 300 s.展开更多
In order to learn the enzymatic characteristics of Huai yam powder with medium-temperatureα-amylase, effects of substrate concentration,enzyme concentration, pH and temperature wereinvestigated. The Michealis-Menten ...In order to learn the enzymatic characteristics of Huai yam powder with medium-temperatureα-amylase, effects of substrate concentration,enzyme concentration, pH and temperature wereinvestigated. The Michealis-Menten equationwas used to fit the kinetics of the hydrolysis reaction. Experimental results indicate that maximum rate (Vm) is 3.1588 mg/mL·min under the condition of 70°C, pH 7.0 and 0.0200 mg/mL of enzyme concentration. The Michealis constant (Km) is 6.6641 mg/mL. The kinetic model, including the factors such as substrate concentration, enzyme concentration and temperature, was established for the hydrolysis reaction under the temperature range from 40°C - 70°C.展开更多
Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aim...Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aiming to satisfy the electrochemical catalysis performance.In this work,an environmentally friendly in situ green phosphating strategy and spatial limiting effect of the RuCo precursor is employed to fabricate the ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres(Ru NCs/Co_(2)P HMs).The obtained Ru NCs/Co_(2)P HMs electrocatalysts exhibit high hydrogen evolution reaction(HER) activity at wide pH ranges,which require an overpotential of 77 mV to achieve the current density of 10 mA/cm^(2) in 0.5 mol/L H_(2)SO_(4) and 118 mV in 1.0 mol/L KOH.Besides,the multifunctional Ru NCs/Co_(2)P HMs exhibit good oxygen evolution reaction(OER) activity with an overpotential of 197 mV to reach the current density of 10 mA/cm^(2) in 0.5 mol/L H_(2)SO_(4),which is below that of the commercial RuO_(2) electrocatalyst(248 mV).A two-electrode electrolyzer is assembled as well,in acid electrolyte,it achieves a current density of 10 mA/cm^(2) at a voltage of 1.53 V,which is superior to that of the benchmark of precious metal-based electrolyzer(1.58 V).展开更多
Guided bone regeneration in the alveolar bone relies on the colonization and differentiation of immune cells within the defect area.The absence of osteoinductive and osteoimmune properties of currently available scaff...Guided bone regeneration in the alveolar bone relies on the colonization and differentiation of immune cells within the defect area.The absence of osteoinductive and osteoimmune properties of currently available scaffolds hinders to achieve optimal repair outcomes in clinical settings.Thus,we aimed to enhance the bone repair ability of polycaprolactone(PCL)scaffolds by incorporating osteoinductive amorphous calcium phosphate(ACP)with immune-regulating zinc ions(ACP(Zn),ACZP),to create a favorable immunomodulatory microenvironment.After one day of co-culture with PCL-ACZP,the spreading area of macrophage cells was significantly higher than that from the original PCL scaffold.Additionally,over 32.1%of macrophages exhibited M2 polarization within three days of co-culture.The PCLACZP/macrophage-conditioned medium significantly boosted osteogenic gene expression in MC3T3-E1 cells.After eight weeks of implantation in a rat femoral condyle defect,the BV/TV from the PCL-ACZP group reached 32.9%,1.4 times of that from the PCL group.Furthermore,the PCL-ACZP-GelMA biphasic module as prepared successfully achieved complete regeneration of three-walled alveolar bone defects in rabbits,resulting in arch-shaped alveolar bone repair and providing greater convenience in the clinical settings.This study showcased the effectiveness of PCL-ACZP-GelMA biphasic module as bioactive scaffolds in the morphological restoration of alveolar bone.展开更多
The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered...The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy density.Although LiMn_(x)Fe_(1-x)PO_(4)has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap density.This review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMn_(x)Fe_(1-x)PO_(4)to analyze reaction processes accurately and guide material preparation.Later,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMn_(x)Fe_(1-x)PO_(4),including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology design.Finally,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are anticipated.More importantly,it is expected to provide key insights into the development of high-performance and stable LiMn_(x)Fe_(1-x)PO_(4)materials,to achieve practical energy storage requirements.展开更多
The efficient recycling of spent lithium iron phosphate(LiFePO_(4),also referred to as LFP)should convert Fe(Ⅱ)to Fe(Ⅲ),which is key to the extraction of Li and separation of Fe and is not well understood.Herein,we ...The efficient recycling of spent lithium iron phosphate(LiFePO_(4),also referred to as LFP)should convert Fe(Ⅱ)to Fe(Ⅲ),which is key to the extraction of Li and separation of Fe and is not well understood.Herein,we systematically study the oxidation of LiFePO_(4)in the air and in the solution containing oxidants such as H_(2)O_(2)and the effect of oxidation on the leaching behaviors of LFP.In the air,O_(2)breaks down the LFP olivine structure at 550℃for 1 h by oxidizing Fe(Ⅱ)to Fe(Ⅲ)in terms of converting LFP to Li_(3)Fe_(2)(PO_(4))_(3)and Fe_(2)O_(3).After that,Li is leached in 0.5 M sulfuric acid solution and is further recycled as Li_(3)PO_(4)with a Li recovery efficiency of 97.48%.Meanwhile,Fe is recovered as FePO_(4)and Fe_(2)O_(3).Compared with H_(2)SO_(4)-H_(2)O_(2),the air oxidation saves H_(2)O_(2)but increases the leaching efficiency of Fe and H_(2)SO_(4)consumption.The discrepancy of Fe leaching efficiency can be attributed to the different leaching mechanisms involving the solid-to-solid and solid-to-liquid-to-solid conversions.Furthermore,the results of the Everbatt model analysis show that the air roasting-H_(2)SO_(4)leaching method has low emission and potentially high income,which is simple and safe.Overall,this work will deepen the understanding of acid leaching of LFP and favorably stimulate the maturation of the LFP recycling technique.展开更多
In this study,a phosphate-based conversion coating(PCC)was applied as a precursor before forming silicate-fluoride(SiF)and silicate-phosphate-fluoride(SiPF)based flash-plasma electrolytic oxidation(Flash-PEO)coatings ...In this study,a phosphate-based conversion coating(PCC)was applied as a precursor before forming silicate-fluoride(SiF)and silicate-phosphate-fluoride(SiPF)based flash-plasma electrolytic oxidation(Flash-PEO)coatings on AZ31B magnesium alloy.The main novelty is the successful incorporation of calcium,zinc,manganese and phosphate species into the Flash-PEO coatings via a precursor layer rather than using the electrolyte.The precursor also led to longer lasting and more intense discharges during the PEO process,resulting in increased pore size.Corrosion studies revealed similar short-term performance for all coatings,with impedance modulus at low frequencies above 10^(7)Ωcm^(2),and slightly better performance for the SiPF-based coating.Nonetheless,the enlarged pores in the PEO coatings functionalized with the PCC precursor compromised the effectiveness of self-healing mechanisms by creating diffusion pathways for corrosive species,leading to earlier failure.These phenomena were effectively monitored by recording the open circuit potential during immersion in 0.5 wt.%NaCl solution.In summary,this study demonstrates that conversion coatings are a viable option for the functionalization of PEO coatings on magnesium alloys,as they allow for the incorporation of cationic and other species.However,it is crucial to maintain a small pore size to facilitate effective blockage through self-healing mechanisms.展开更多
The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and di...The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and dicalcium phosphate dihydrate(DCPD)in eye environment were evaluated,and uncoated Mg was used for comparison.It was found that uniform corrosion occurred macroscopically to the coated Mg samples in sodium lactate ringer’s injection(SLRI)as well as in the rabbit eyes.In micro-scale,the corrosion was characterized by local cracking and pitting primarily.Mg and calcium(Ca)were incorporated into the surface corrosion products and a multi-layer structure was formed.Compared to other samples,HA-coated Mg slowed down dramatically the alkalinity of the solution and the ion release of the sample,and exhibited the lowest corrosion rate in SLRI,which was about 0.22 mm/a.In terms of biocompatibility,fibroblasts demonstrated high viability in the HA-coated and DCPD-coated Mg groups(p<0.05)in vitro.In vivo,HA-coated Mg was found to show lower inflammatory response and fibrosis than the other groups did,as indicated by hematoxylin-eosin and immunofluorescence staining.During the degrading process of HA-coated Mg in the rabbits’eyes,no inflammation was found in the anterior chamber,lens,and vitreous body.HA-coated Mg was fully biodegraded fifteen weeks post-operation,and the scleral drainage channel(SDC)was formed without obvious scarring.It is concluded that HA-coated Mg implantation is a promising adjunctive procedure to improve the success rate of trabeculectomy.Statement of significance:Magnesium(Mg)has shown to be a potential biomaterial for ophthalmic implants in our previous work.However,inflammatory response resulted from the low corrosion resistance of Mg is a major concern.It is shown here that Mg coated with different calcium phosphates can improve these properties in varying degrees and keep the scleral drainage channel unobstructed and unscarred.Based on our in vitro and in vivo studies,HA-coated Mg exhibited a better degradation behavior and excellent biocompatibility.The scleral drainage channel still exists and aqueous humor flows out smoothly after the full degradation of the implant.It is concluded that HA-coated Mg is a promising biomaterial to increase the therapeutic efficiency of trabeculectomy for glaucoma.展开更多
Slow-release phosphate materials were prepared by activating insoluble phosphate with organic acid to stabilize high concentrations of Cd and Zn in contaminated smelter soil.The results showed that oxalic acid(0.1 mol...Slow-release phosphate materials were prepared by activating insoluble phosphate with organic acid to stabilize high concentrations of Cd and Zn in contaminated smelter soil.The results showed that oxalic acid(0.1 mol/L)activated tricalcium phosphate(TO-0.1)provided the most efficient stabilization of Cd and Zn.After 30 d treatment,leaching concentrations of Cd and Zn in soil were decreased from 3.17 and 16.60 mg/L to 0.078 and 0.32 mg/L,respectively.The acid-soluble fractions of Cd and Zn were transformed into reducible,oxidizable,and residual fractions.Notably,As mobility in TO-0.1 treated soils did not increase.In addition,acid rain leaching and 150 d of natural aging revealed that the slow-release phosphate material provided long-term stability for the stabilization of Cd and Zn.This study verifies the potential application of slow-release phosphate materials for the remediation of heavy metal contaminated soil at smelting sites.展开更多
基金Project(2011AA030103) supported by the National High-tech Research Program of ChinaProject(201001C0104669453) supported by the Guangdong Innovation R&D Team Project,China
文摘Phospahting coated WE43 magnesium alloy was prepared by an immersion method. The microstructure, corrosion resistance and biocompatibility of the coated alloy were investigated. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to examine the microstructure and the composition of the coated alloy. The corrosion resistance was studied by means of potentiodynamic polarization method and the biocompatibility of the surface modified WE43 alloy was evaluated by （3-（4,5）-Dimethylthiazol-2, yl）-2,5-diphenyltetrazolium bromide （MTT） and hemolysis test. The results show that the phosphating coating can enhance the corrosion resistance of WE43 alloy and can be a good candidate to increase the biocompatibility of WE43 alloy.
基金Project(2012J05099)supported by the Natural Science Foundation of Fujian Province,ChinaProject(YKJ10021R)supported by the Scientific Research Project of Xiamen University of Technology
文摘Silicate sol post-treatment was applied to form a complete composite coating on the phosphated zinc layer. The chemical compositions of the coatings were investigated using XPS. The coated samples were firstly scratched and then exposed to the neutral salt spray(NSS) chamber for different time. The microstructure and chemical compositions of the scratches were studied using SEM and EDS. And the non-scratched coated samples were compared. The self-healing mechanism of the composite coatings was discussed. The results show that during corrosion, the self-healing ions in composite coatings dissolve, diffuse and transfer to the scratches or the defects, and then recombine with Zn2+ to form insoluble compound, which deposits and covers the exposed zinc. The corrosion products on the scratches contain silicon, phosphorous, oxygen, chloride and zinc, and they are compact, fine, needle and flake, effectively inhibiting the corrosion formation and expansion of the exposed zinc layer. The composite coatings have good self-healing ability.
基金This work was supported by the Bengbu Yucheng New Materials Science and Technology Ltd. （No.2012QTXM0375） and the Natural Science Foundation of Anhui Province （No.1208085QE99）.
文摘Hydroxylamine sulfate （HAS） and sodium nitrite are used as the accelerators for zinc phos- phate coating on high carbon steel. Phase evolution of phosphate coating was investigated by X-ray diffraction. It is found that the phosphating coatings are mainly composed of hopeite Zn3Fe（PO4）2.4H2O and phosphophyllite Zn2Fe（PO4）2.4H2O. The microstructural changes of the phosphate coating, as a function of phosphating time, were evaluated by scanning elec- tron microscopy. Four-ball friction experiments reveal that hydroxylamine sulfate instead of sodium nitrite can effectively reduce the friction coefficient of lubricated phosphating coat- ing. Therefore, it may be expected that HAS will be widely used as a fast and ECO-friendly accelerator in phosphate industry.
文摘To improve the corrosion resistance of phosphate coatings, the phosphated hot-dip galvanized (HDG) steel was post-sealed with cerium nitrate solution. The morphology, composition, corrosion resistance of the coatings was investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and neutral salt spray (NSS) tests. The results show that after post-sealing the phosphated HDG samples with cerium nitrate solution, the pores among the zinc phosphate crystals are sealed by the compounds containing phosphorus, oxygen and cerium; the zinc phosphate crystals are covered by the flocculent cerium compounds; and the continuous composite coatings are formed on HDG steel. The corrosion resistance of the composite coatings, which increases with the increase in phosphating time and cerium nitrate post-sealing time, is far higher than that of the single phosphate coatings. The composite coatings with the optimal corrosion resistance are obtained for phosphating 300 s and post-sealing 300 s; and the corrosion resistance is more outstanding than that of the chromate coatings.
基金Project supported by the Henan Natural Science Foundation Program (200460178)
文摘Zinc phosphate coating formed on 6061-A1 alloy was studied with the help of electrochemical measurements, Fourier Transform Infrared （FTIR）, and Scanning Electron Microscopy （SEM）, after dipping it in phosphating solutions containing different concentrations of Rare Earth Nitrate （REN）. REN, which acted as an accelerator in the phosphating solution, could catalyze the surface reaction and accelerate the phosphating process. REN mainly enabled the P in the phosphate coating to exist in the form of PO4^3- and promoted the hydrolysis of phosphatic acid in a liquid layer at the cathodes. This resulted in the evolution of H2 at the cathodes, which increased the local pH value and in turn drove the precipitation of the phosphate coating. Additionally, REN was adsorbed on the surface of the aluminum substrates to form a gel during the phosphating process. These gel particles were good crystal seeds, which helped to form phosphate crystal nuclei and possess the function of a nucleation agent that could decrease the phosphate crystal size. The corrosion resistance of the formed zinc phosphate coatings was improved.
基金Funded by the National Natural Science Foundation(No.501408517)the Natural Science Foundation of Fujian Province(No.2012J05099)the Pre-research Project of National Natural Science Fund of Xiamen University of Technology(No.XYK201410)
文摘The phosphated and cerium nitrate post-sealed galvanized steel was firstly scratched to expose zinc layer and then placed in neutral salt spray （NSS） chamber for different durations. The microstructure and compositions of the scratches were investigated using SEM and EDS. The phases of the corrosion products were examined through XRD. The self-healing mechanism of the composite coatings was discussed. The experimental results show that the composite coatings have an excellent corrosion resistance. The corrosion products increase with corrosion time and finally cover the whole scratch. They contain phosphorous, cerium, oxygen, chloride and zinc, and are fine needle and exceedingly compact. The composite coatings are favorable self-healing. During corrosion, the self-healing ions such as Ce3＋, Ce4＋, PO43-, Zn2＋ in the composite coatings were dissolved, migrated, recombined, and covered the exposed zinc, impeding zinc corrosion. The self-healing process of the scratches on the composite coatings can be divided into three stages, about 2 h, 4 h, and 24 h, respectively.
基金Research Foundation of The Education Department of Liaoning Province,China(L2010396)Scientific Research Starting Foundation for the DoctorsShenyang University of Technology,China(2008-33)
文摘The corrosion behavior of a NdFeB magnet obtained at room temperature,with and without ultrasonic were investigated.The corrosion resistance was investigated by corrosion immersion tests in 3 wt%neutral NaCl solutions,potentiodynamic polarization tests and electrochemical impedance spectroscopy(EIS).The morphology of the conversion coatings on NdFeB surface were analyzed by scanning electron microscopy(SEM).And the forming mechanism of coatings was studied by potential-time curves.The tests of corrosion resistances show that the combination of phosphating treatment with ultrasonic will further improve the corrosion resistance of the NdFeB.The SEM also confirms that phosphating coating under ultrasonic is more homogeneous and compact.
基金supported by the Natural Science Foundation of Henan Province (200510476009)
文摘Zinc phosphate coatings formed on 6061-Al alloy, after dipping in phosphating solutions containing different amounts of Y2O3（yttrium oxide）, were studied by scanning electron microscopy （SEM）, X-ray diffraction （XRD） and electrochemical measurements. Significant variations in the morphology and corrosion resistance afforded by zinc phosphate coating were especially observed as Y2O3 in phosphating solution varied from 0 to 40 mg/L. The addition of Y2O3 changed the initial potential of the interface between aluminum alloy substrate and phosphating solution and increased the number of nucleation sites. The phosphate coating thereby was less porous structure and covered the surface of aluminum alloy completely within short phosphating time. Phosphate coating was mainly composed of Zn3（PO4）2·4H2O （hopeite） and AlPO4（aluminum phosphate）. Y2O3, as an additive of phosphatization, accelerated precipitation and refined the gain size of phosphate coating. The corrosion resistance of zinc phosphate coating in 3% NaCl solution was improved as shown by polarization measurement. In the present research, the optimal amount of Y2O3 was 10-20 mg/L, and the optimal phosphating time was 600 s.
基金the Science and Technology Key Project of Anhui Province,China(No.2022e03020004).
文摘Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.
基金the financial support from the Hunan Provincial Science and Technology Plan Project(Nos.2017TP1001,2020JJ4710)National Natural Science Foundation of China(No.11764018)+2 种基金the Natural Science Foundation of Jiangxi Province(No.20202ACBL211004)Changsha Science and Technology Plan(No.kq1801079)National Natural Science Foundation of China(No.21776317).
文摘Designing non-noble metal electrocatalysts toward alkaline hydrogen evolution reaction(HER)with high performance at a large current density is urgent.Herein,a CoO/CoP heterostructure catalyst(termed POZ)was designed by a phosphating strategy.The strong electron transfer on the interface of CoO/CoP was experimentally and theoretically proven.POZ showed a low overpotential of 236 mV at 400 mA/cm^(2),which was 249 mV lower than non-phosphated sample.It also exhibited a remarkable solar-to-hydrogen conversion efficiency of 10.5%.In this work,the construction of CoO/CoP interface realized by a simple phosphating strategy could provide an important reference to boost the HER performance on those materials not merely metal oxides.
基金Project(05GK1006-1) supported by Hunan Province, China
文摘Zinc phosphate films were formed on AZ31 magnesium alloy by immersing into a phosphatation bath to enhance the corrosion resistance of AZ31. Different films were prepared by changing the processing parameters such as immersing time and temperature. The corrosion protection of the coatings was studied by electrochemical measurements such as electrochemical impedance spectroscopy, potentiodynamic polarization curves, and the structure of the films were studied by metalloscopy and X-ray diffraction (XRD). The results show that, the film formed at 80 ℃, 10 min has the highest corrosion resistance. The XRD patterns show that the film consists of hopeite (Zn3(PO4)2·xH2O).
基金Project(07BS405) supported by the Excellent Talents Foundation of Huaqiao Univeristy, China
文摘The phosphated hot-dip galvanized(HDG) sheets were post-sealed with sodium molybdate solution to improve the corrosion resistance of phosphate coatings. The morphology,chemical composition and corrosion resistance of the coatings were investigated using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Tafel polarization measurements and neutral salt spray(NSS) tests,and were compared with those of the single coatings. The results show that post-sealing the phosphated HDG steel with molybdate solution,the pores among the zinc phosphate crystals are sealed with molybdate films containing Zn,P,O and Mo,and the continuous composite coatings are formed. The suppression of both the anodic and the cathodic processes of zinc corrosion on the samples are enhanced significantly. The synergistic corrosion protection effect of the single phosphate coatings and molybdate films for zinc is evident. The corrosion resistance of the composite coatings increases with phosphating time up to 300 s.
文摘In order to learn the enzymatic characteristics of Huai yam powder with medium-temperatureα-amylase, effects of substrate concentration,enzyme concentration, pH and temperature wereinvestigated. The Michealis-Menten equationwas used to fit the kinetics of the hydrolysis reaction. Experimental results indicate that maximum rate (Vm) is 3.1588 mg/mL·min under the condition of 70°C, pH 7.0 and 0.0200 mg/mL of enzyme concentration. The Michealis constant (Km) is 6.6641 mg/mL. The kinetic model, including the factors such as substrate concentration, enzyme concentration and temperature, was established for the hydrolysis reaction under the temperature range from 40°C - 70°C.
基金supported by Fundamental Research Funds for Central Universities of SCUT(No.D2182400)Tip-top Scientific and Technical Innovative Youth Talents of Guangdong Special Support Program(No.2016TQ03N541)+1 种基金Guangdong Natural Science Funds for Distinguished Young Scholar(No.2017B030306001)the National Natural Science Foundation of China(No.51972147)。
文摘Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aiming to satisfy the electrochemical catalysis performance.In this work,an environmentally friendly in situ green phosphating strategy and spatial limiting effect of the RuCo precursor is employed to fabricate the ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres(Ru NCs/Co_(2)P HMs).The obtained Ru NCs/Co_(2)P HMs electrocatalysts exhibit high hydrogen evolution reaction(HER) activity at wide pH ranges,which require an overpotential of 77 mV to achieve the current density of 10 mA/cm^(2) in 0.5 mol/L H_(2)SO_(4) and 118 mV in 1.0 mol/L KOH.Besides,the multifunctional Ru NCs/Co_(2)P HMs exhibit good oxygen evolution reaction(OER) activity with an overpotential of 197 mV to reach the current density of 10 mA/cm^(2) in 0.5 mol/L H_(2)SO_(4),which is below that of the commercial RuO_(2) electrocatalyst(248 mV).A two-electrode electrolyzer is assembled as well,in acid electrolyte,it achieves a current density of 10 mA/cm^(2) at a voltage of 1.53 V,which is superior to that of the benchmark of precious metal-based electrolyzer(1.58 V).
基金financially supported by the National Natural Science Foundation of China(Nos.82203680 and 52273278)the Natural Scientific Foundation of Liaoning Province(No.2021-MS-176)+1 种基金Shenyang Bureau of Science and Technology(No.RC230527)the Central Guidance Funding for Local Scientific and Techno-logical Development in Liaoning(No.2023JH6/100100029).
文摘Guided bone regeneration in the alveolar bone relies on the colonization and differentiation of immune cells within the defect area.The absence of osteoinductive and osteoimmune properties of currently available scaffolds hinders to achieve optimal repair outcomes in clinical settings.Thus,we aimed to enhance the bone repair ability of polycaprolactone(PCL)scaffolds by incorporating osteoinductive amorphous calcium phosphate(ACP)with immune-regulating zinc ions(ACP(Zn),ACZP),to create a favorable immunomodulatory microenvironment.After one day of co-culture with PCL-ACZP,the spreading area of macrophage cells was significantly higher than that from the original PCL scaffold.Additionally,over 32.1%of macrophages exhibited M2 polarization within three days of co-culture.The PCLACZP/macrophage-conditioned medium significantly boosted osteogenic gene expression in MC3T3-E1 cells.After eight weeks of implantation in a rat femoral condyle defect,the BV/TV from the PCL-ACZP group reached 32.9%,1.4 times of that from the PCL group.Furthermore,the PCL-ACZP-GelMA biphasic module as prepared successfully achieved complete regeneration of three-walled alveolar bone defects in rabbits,resulting in arch-shaped alveolar bone repair and providing greater convenience in the clinical settings.This study showcased the effectiveness of PCL-ACZP-GelMA biphasic module as bioactive scaffolds in the morphological restoration of alveolar bone.
基金National Natural Science Foundation of China(52104294)Fundamental Research Funds for the Central Universities(FRF-TP-19-079A1)。
文摘The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy density.Although LiMn_(x)Fe_(1-x)PO_(4)has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap density.This review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMn_(x)Fe_(1-x)PO_(4)to analyze reaction processes accurately and guide material preparation.Later,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMn_(x)Fe_(1-x)PO_(4),including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology design.Finally,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are anticipated.More importantly,it is expected to provide key insights into the development of high-performance and stable LiMn_(x)Fe_(1-x)PO_(4)materials,to achieve practical energy storage requirements.
基金supported by the Chilwee Group(No.CWDY-ZH-YJY-202101-001)the Fundamental Research Funds for the Central Universities(No.2042023kf0214)the Starting Funding from Wuhan University.
文摘The efficient recycling of spent lithium iron phosphate(LiFePO_(4),also referred to as LFP)should convert Fe(Ⅱ)to Fe(Ⅲ),which is key to the extraction of Li and separation of Fe and is not well understood.Herein,we systematically study the oxidation of LiFePO_(4)in the air and in the solution containing oxidants such as H_(2)O_(2)and the effect of oxidation on the leaching behaviors of LFP.In the air,O_(2)breaks down the LFP olivine structure at 550℃for 1 h by oxidizing Fe(Ⅱ)to Fe(Ⅲ)in terms of converting LFP to Li_(3)Fe_(2)(PO_(4))_(3)and Fe_(2)O_(3).After that,Li is leached in 0.5 M sulfuric acid solution and is further recycled as Li_(3)PO_(4)with a Li recovery efficiency of 97.48%.Meanwhile,Fe is recovered as FePO_(4)and Fe_(2)O_(3).Compared with H_(2)SO_(4)-H_(2)O_(2),the air oxidation saves H_(2)O_(2)but increases the leaching efficiency of Fe and H_(2)SO_(4)consumption.The discrepancy of Fe leaching efficiency can be attributed to the different leaching mechanisms involving the solid-to-solid and solid-to-liquid-to-solid conversions.Furthermore,the results of the Everbatt model analysis show that the air roasting-H_(2)SO_(4)leaching method has low emission and potentially high income,which is simple and safe.Overall,this work will deepen the understanding of acid leaching of LFP and favorably stimulate the maturation of the LFP recycling technique.
基金support of the PID2021-124341OB-C22/AEI/10.13039/501100011033/FEDER,UE(MICIU)J.M.Vega also acknowledges the Grant RYC2021-034384-I funded by MICIU/AEI/10.13039/501100011033 and by“European Union Next Generation EU/PRTR”.
文摘In this study,a phosphate-based conversion coating(PCC)was applied as a precursor before forming silicate-fluoride(SiF)and silicate-phosphate-fluoride(SiPF)based flash-plasma electrolytic oxidation(Flash-PEO)coatings on AZ31B magnesium alloy.The main novelty is the successful incorporation of calcium,zinc,manganese and phosphate species into the Flash-PEO coatings via a precursor layer rather than using the electrolyte.The precursor also led to longer lasting and more intense discharges during the PEO process,resulting in increased pore size.Corrosion studies revealed similar short-term performance for all coatings,with impedance modulus at low frequencies above 10^(7)Ωcm^(2),and slightly better performance for the SiPF-based coating.Nonetheless,the enlarged pores in the PEO coatings functionalized with the PCC precursor compromised the effectiveness of self-healing mechanisms by creating diffusion pathways for corrosive species,leading to earlier failure.These phenomena were effectively monitored by recording the open circuit potential during immersion in 0.5 wt.%NaCl solution.In summary,this study demonstrates that conversion coatings are a viable option for the functionalization of PEO coatings on magnesium alloys,as they allow for the incorporation of cationic and other species.However,it is crucial to maintain a small pore size to facilitate effective blockage through self-healing mechanisms.
基金supported by the Natural Science Foundation of Chongqing(Grant No.csts2018jcyjAX0016)Funded by the Senior Medical Talents Program of Chongqing for Young and Middle-aged.
文摘The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and dicalcium phosphate dihydrate(DCPD)in eye environment were evaluated,and uncoated Mg was used for comparison.It was found that uniform corrosion occurred macroscopically to the coated Mg samples in sodium lactate ringer’s injection(SLRI)as well as in the rabbit eyes.In micro-scale,the corrosion was characterized by local cracking and pitting primarily.Mg and calcium(Ca)were incorporated into the surface corrosion products and a multi-layer structure was formed.Compared to other samples,HA-coated Mg slowed down dramatically the alkalinity of the solution and the ion release of the sample,and exhibited the lowest corrosion rate in SLRI,which was about 0.22 mm/a.In terms of biocompatibility,fibroblasts demonstrated high viability in the HA-coated and DCPD-coated Mg groups(p<0.05)in vitro.In vivo,HA-coated Mg was found to show lower inflammatory response and fibrosis than the other groups did,as indicated by hematoxylin-eosin and immunofluorescence staining.During the degrading process of HA-coated Mg in the rabbits’eyes,no inflammation was found in the anterior chamber,lens,and vitreous body.HA-coated Mg was fully biodegraded fifteen weeks post-operation,and the scleral drainage channel(SDC)was formed without obvious scarring.It is concluded that HA-coated Mg implantation is a promising adjunctive procedure to improve the success rate of trabeculectomy.Statement of significance:Magnesium(Mg)has shown to be a potential biomaterial for ophthalmic implants in our previous work.However,inflammatory response resulted from the low corrosion resistance of Mg is a major concern.It is shown here that Mg coated with different calcium phosphates can improve these properties in varying degrees and keep the scleral drainage channel unobstructed and unscarred.Based on our in vitro and in vivo studies,HA-coated Mg exhibited a better degradation behavior and excellent biocompatibility.The scleral drainage channel still exists and aqueous humor flows out smoothly after the full degradation of the implant.It is concluded that HA-coated Mg is a promising biomaterial to increase the therapeutic efficiency of trabeculectomy for glaucoma.
基金supported by the Natural Science Foundation of Hunan Province,China(No.2024JJ1012)the Postgraduate Innovative Project of Central South University,China(No.2023ZZTS0459)the National Key Research and Development Program of China(No.2019YFC1803605)。
文摘Slow-release phosphate materials were prepared by activating insoluble phosphate with organic acid to stabilize high concentrations of Cd and Zn in contaminated smelter soil.The results showed that oxalic acid(0.1 mol/L)activated tricalcium phosphate(TO-0.1)provided the most efficient stabilization of Cd and Zn.After 30 d treatment,leaching concentrations of Cd and Zn in soil were decreased from 3.17 and 16.60 mg/L to 0.078 and 0.32 mg/L,respectively.The acid-soluble fractions of Cd and Zn were transformed into reducible,oxidizable,and residual fractions.Notably,As mobility in TO-0.1 treated soils did not increase.In addition,acid rain leaching and 150 d of natural aging revealed that the slow-release phosphate material provided long-term stability for the stabilization of Cd and Zn.This study verifies the potential application of slow-release phosphate materials for the remediation of heavy metal contaminated soil at smelting sites.
