The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate indiv...Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.展开更多
In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix compo...In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix composites were prepared by semi-solid stirring and hot extrusion processes.The main objective is to study the effects of different contents of spherical Ti particles(0,3,and 5wt%)on the microstructure,mechanical properties and wear resistance of the composites.The results show that the addition of Ti particles can form a good interface bond with the matrix,and refine the undeformed coarse grains in the material,which has a certain increase in the hardness,yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the material.In addition,when subjected to friction grinding under a force of 100 N,compared with the matrix,the composite material reinforced with Ti particles shows a lower wear rate and friction coefficient,demonstrates higher wear resistance,and can be applied in more fields.展开更多
The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in ...The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in extruded Mg-Y-Nd-Zr alloys by Sm addition.Sm promotes dynamic recrystallization,activates non-basal slip systems and weakens basal texture intensity,leading to the sub-grain lamellar structure and rare earth texture.The EWS2 alloy exhibits an outstanding combination of high yield strength(328 MPa)and ductility(15.1%).Furthermore,the fragmented second phases in the Sm-containing alloy are uniformly distributed,reducing the subsequent corrosion driving force after micro-galvanic corrosion and facilitating the growth of a more passivating and compact corrosion film.These combined effects contribute to the lowest degradation rate in the EWS2 alloy.This study demonstrates the correlation between microstructure and properties in Sm-containing WE series alloys,providing insights for the design of other high performance magnesium alloys.展开更多
Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic ...Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.展开更多
Cold deformation treatment of Cu-bearing stainless steel through a cold rolling process combined with electric pulse treatment(EPT)can significantly improve the microstructure and formability of cold-rolled Cu-bearing...Cold deformation treatment of Cu-bearing stainless steel through a cold rolling process combined with electric pulse treatment(EPT)can significantly improve the microstructure and formability of cold-rolled Cu-bearing stainless steel.The microstructure after EPT was characterized by scanning electron microscopy,transmission electron microscopy,and in-situ tensile testing.It is found that compared with conventional heat treatment,EPT process can significantly promote the nucleation rate and mobility at grain boundaries of the deformed samples,greatly accelerating the recovery and static recrystallization of Cu-bearing stainless steel samples at lower temperatures and contributing to the recovery of anisotropy and the re-molding of deformed samples.Microstructural characterization and theoretical analyses show that the rapid recrystallization during EPT process is caused not only by Joule heating effects but also by non-thermal effects that accelerate grain boundary migration and dislocation destruction and regeneration.In addition,EPT process significantly accelerated the nucleation and precipitation growth of Cu-rich phase.The coarsening of Cu-rich phase during EPT process is due to not only the high vacancy diffusion coefficient under the action of the electric pulse but also the increase in the vacancy diffusion flux induced by the electromigration in the process of the electric pulse.展开更多
The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepar...The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.展开更多
The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investig...The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.展开更多
Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ...Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.展开更多
The impact of Mn addition on the microstructure,mechanical properties and corrosion behavior of T6-treated Al−Si−Mg−xMn(x=0.2−1.0 wt.%)alloys in a 3.5 wt.%NaCl solution was investigated.The results showed that adding ...The impact of Mn addition on the microstructure,mechanical properties and corrosion behavior of T6-treated Al−Si−Mg−xMn(x=0.2−1.0 wt.%)alloys in a 3.5 wt.%NaCl solution was investigated.The results showed that adding 0.2 wt.%Mn to T6-treated Al−Si−Mg alloys enhanced the corrosion resistance by promoting the formation ofα-AlFeMnSi phase,characterized by smaller absolute Volta potential values compared to eutectic Si,β-AlFeSi andπ-AlFeMgSi phases.However,the addition of 0.5 wt.%Mn and 1.0 wt.%Mn to the T6-treated Al−Si−Mg alloys increased the size of theα-AlFeMnSi phase.This decreased the properties of T6-treated Al−Si−Mg alloys.Therefore,the optimum Mn content was 0.2 wt.%,providing a novel approach for synergistically enhancing mechanical properties and corrosion resistance of Al−Si−Mg alloys.展开更多
The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron co...The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron concentration−relative electronegativity(VEC−REN)composite descriptor was developed to effectively predict the mechanical properties of HEBs.The results demonstrate that with a fixed VEC,the rise of the REN makes HEBs harder but more brittle when the electronegativity of doped TM atoms is lower than that of boron atoms.However,HEBs become softer and more ductile as REN increases if the doped TM atoms have higher electronegativity than boron atoms.The VEC−REN composite descriptor can accurately classify and predict the mechanical properties of HEBs with different components,which provides important theoretical guidance for the rapid design and development of novel high-entropy ceramic materials.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of re...Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.展开更多
The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The micr...The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The microstructure analysis revealed that the tungsten phase in 95W-HEAs exhibited a nearly spherical morphology in the HEA binder matrix and the formation of a Cr−Mn oxide mixed phase was observed.The sintering temperature exerted a significant influence on the relative density,grain size,W−W contiguity,and mechanical properties of the alloys.The optimal performance was achieved when sintering at 1450℃,yielding a relative density of 96.61%,a W−W contiguity of 0.528,an average grain size of 18.97μm,a compressive strength of 2234.82 MPa,and a hardness of HV 400.6.The activation energy for the diffusion of tungsten in the liquid phase formed by HEA binder was calculated to be 354.514 kJ/mol,highlighting its role in controlling grain growth.展开更多
The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a cr...The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a critical challenge limiting the general performance and functional applications of carbon fiberreinforced composites.In this paper,a novel strategy for bioinspired root-soil interfacial structure was presented to enhance the mechanical properties of polymer bonded explosives.A multiscale nanowire heterostructure was constructed through the in-situ growth of morphologically controllable zinc oxide nanowires on the carbon fiber surface via a facile hydrothermal method,with polydopamine as the interfacial reinforcement layer.This structure emulated the function of the"root",and combined with a network-distributed polymer binder representing the"soil",formed a robust root-soil interlocking interfacial structure within the polymer bonded explosives.Due to the multiscale interfacial reinforcement structure,the tensile strength of the polymer bonded explosives was visibly increased by 41%,the strain at the break by 110%,and the creep resistance by 51%with only 0.4 wt%filler adopted.The thermal stress resistance was improved by 57%owing to the synergistic enhancement of thermal conductivity and mechanical properties.This study provides new perspectives and insights for designing and constructing high-performance polymer bonded explosives and other functional composites.展开更多
To investigate the aging mechanisms and elucidate the correlations between unstable microstructure and performance in biodegradable Zn alloys,the accelerated aging experiment was conducted on a high-performance wrough...To investigate the aging mechanisms and elucidate the correlations between unstable microstructure and performance in biodegradable Zn alloys,the accelerated aging experiment was conducted on a high-performance wrought Zn−0.1Mg alloy by annealing at 200℃ for varying durations.The findings reveal that the tensile strength of the alloy rapidly and significantly declines with prolonged annealing time,decreasing from 383 MPa for the as-received alloy to 102 MPa for the alloy subjected to 1440 min of annealing.The primary factors contributing to this considerable reduction in strength are static recrystallization,grain coarsening,and dislocation annihilation.Initially,the ductility of the alloy shows fluctuations,ultimately experiencing a marked decrease after extended annealing.This decline is linked to the grain growth and heightened texture intensity,while the unusual increase in ductility observed between 30 and 120 min of annealing is likely due to the formation of twins.In addition,due to rapid grain growth and an increase in precipitates and twins,the corrosion resistance of the alloy in Hank’s solution has worsened,with the corrosion rate rising from 0.037 to 0.069 mm/a following 300 min of annealing.展开更多
W-CoFeNi WHAs(tungsten heavy alloys)were fabricated by powder metallurgy with sintering temperatures ranging from 1480 to 1560℃.The influence of sintering temperatures on microstructure evolutions and mechanical prop...W-CoFeNi WHAs(tungsten heavy alloys)were fabricated by powder metallurgy with sintering temperatures ranging from 1480 to 1560℃.The influence of sintering temperatures on microstructure evolutions and mechanical properties of W-CoFeNi WHAs was investigated.The experimental results show that near-spherical W grains are distributed in CoFeNi ternary multi-principal-elements alloy(MPEA)with the formation of W-richμphase in all W-CoFeNi WHAs.The volume fractions ofμphase and average W grain size increase with sintering temperatures changing from 1480 to 1560℃.The activation energy for W grain growth is significantly higher than that of traditional W-Ni-Fe and W-Ni-Co WHAs,which indicates grain coarsening behavior in CoFeNi MPEA became more difficult compared to the conventional binder alloys.W-CoFeNi sintered at 1480℃exhibits the highest yield strength of 698 MPa among all WHAs due to finer W grain size.The compressive strength and fracture strain of W-CoFeNi reduce when sintering temperatures rise from 1480 to 1560℃.展开更多
To address the challenge that plasticity and strength cannot be synergistically enhanced in 30CrMnSiNi_(2)A fabricated by laser additive manufacturing,high performance samples were fabricated by laser powder bed fusio...To address the challenge that plasticity and strength cannot be synergistically enhanced in 30CrMnSiNi_(2)A fabricated by laser additive manufacturing,high performance samples were fabricated by laser powder bed fusion(LPBF)using the transformation-induced plasticity(TRIP)effect in this study.The optimization of the volumetric energy density(VED)resulted in an increase of the residual austenite(RA)content from 5.5%to 12.7%.Meanwhile,the martensite/austenite(M/A)island content was increased from 10.35%to 39.05%,and the morphology was transitioned from blocky to filmy structure.The phase transition during cooling triggered a competition between pre-martensite and bainite,which reduced the average grain size of the sample to 1.58μm.In addition,the elevated VED promoted the formation of fine carbides during the decomposition of M/A islands,triggering the Orowan effect,which effectively hindered dislocation motion.These microstructural enhancements obtained excellent tensile strength(1566±5.9 MPa)and elongation(14.7%±0.8%).The fracture morphology exhibited a combination of transgranular quasi-cleavage and ductile dimple fractures,indicating a balanced plasticity-strength synergy.This work demonstrates the potential of LPBF for manufacturing 30CrMnSiNi_(2)A components with intricate designs and superior mechanical properties.展开更多
In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt flux...In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt fluxes on the purification effect and mechanical properties of aluminum melt was investigated.The results indicate that lower refining temperatures and modified salt fluxes can effectively enhance the cleanliness of the aluminum melt.As the refining temperature increases,the large inclusions gradually increase.The addition of16wt.%Na_(3)AlF_(6) can dissolve and break up Al_2O_(3) inclusions,facilitating the separation of the aluminum melt and aluminum slag.The addition of 16wt.%Na3AlF6 and 2wt.%CaCO_(3) to the basic salt fluxes enables gas refinement,thereby further improving the cleanliness of the aluminum melt.Under the refining condition of 37wt.%NaCl-47wt.%KCl--16wt.%Na3AIF3-2wt.%CaCO_(3) at 740℃,better cleanliness and mechanical properties were obtained.The cleanliness and yield strength are approximately 99.99928%and 71.46 MPa,respectively.This work can offer valuable reference and theoretical insights for future research.展开更多
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金National Natural Science Foundation of China(52172108)National Key R&D Program of China(2022YFB3707700)Strategic Priority Research Program of the Chinese Academy of Sciences(XDC0144005)。
文摘Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.
基金National Key Research and Development Program of China(2022YFB3708400)the Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006)the Guangdong Provincial Academy of Sciences Special Funds Project for Building Domestic First-class Research Institutions Action(2020GDASYL-20200101001).
文摘In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix composites were prepared by semi-solid stirring and hot extrusion processes.The main objective is to study the effects of different contents of spherical Ti particles(0,3,and 5wt%)on the microstructure,mechanical properties and wear resistance of the composites.The results show that the addition of Ti particles can form a good interface bond with the matrix,and refine the undeformed coarse grains in the material,which has a certain increase in the hardness,yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the material.In addition,when subjected to friction grinding under a force of 100 N,compared with the matrix,the composite material reinforced with Ti particles shows a lower wear rate and friction coefficient,demonstrates higher wear resistance,and can be applied in more fields.
基金supported by the National Natural Science Foundation of China(Nos.52201119,52371108)Frontier Exploration Project of Longmen Laboratory,China(No.LMQYTSKT014)The Joint Fund of Henan Science and Technology R&D Plan of China(No.242103810056).
文摘The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in extruded Mg-Y-Nd-Zr alloys by Sm addition.Sm promotes dynamic recrystallization,activates non-basal slip systems and weakens basal texture intensity,leading to the sub-grain lamellar structure and rare earth texture.The EWS2 alloy exhibits an outstanding combination of high yield strength(328 MPa)and ductility(15.1%).Furthermore,the fragmented second phases in the Sm-containing alloy are uniformly distributed,reducing the subsequent corrosion driving force after micro-galvanic corrosion and facilitating the growth of a more passivating and compact corrosion film.These combined effects contribute to the lowest degradation rate in the EWS2 alloy.This study demonstrates the correlation between microstructure and properties in Sm-containing WE series alloys,providing insights for the design of other high performance magnesium alloys.
基金financially and technically supported by the National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact,Beijing Institute of Technology,China(No.WDZC2024-1)。
文摘Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.
基金supported by the National Natural Science Foundation of China(Nos.52305401 and 52475391)National Key Research and Development Program of China(2024YFB3714301)+1 种基金the Fundamental Research Program of Shanxi Province(202303011211004,TZLH20230818001)Engineering Research Center of the Ministry of Education.
文摘Cold deformation treatment of Cu-bearing stainless steel through a cold rolling process combined with electric pulse treatment(EPT)can significantly improve the microstructure and formability of cold-rolled Cu-bearing stainless steel.The microstructure after EPT was characterized by scanning electron microscopy,transmission electron microscopy,and in-situ tensile testing.It is found that compared with conventional heat treatment,EPT process can significantly promote the nucleation rate and mobility at grain boundaries of the deformed samples,greatly accelerating the recovery and static recrystallization of Cu-bearing stainless steel samples at lower temperatures and contributing to the recovery of anisotropy and the re-molding of deformed samples.Microstructural characterization and theoretical analyses show that the rapid recrystallization during EPT process is caused not only by Joule heating effects but also by non-thermal effects that accelerate grain boundary migration and dislocation destruction and regeneration.In addition,EPT process significantly accelerated the nucleation and precipitation growth of Cu-rich phase.The coarsening of Cu-rich phase during EPT process is due to not only the high vacancy diffusion coefficient under the action of the electric pulse but also the increase in the vacancy diffusion flux induced by the electromigration in the process of the electric pulse.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the National Natural Science Foundation of China(Nos.52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship·Program by CAST(No.2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.
文摘The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.
基金Funded by the National Science Foundation of China(No.52368031)the China Postdoctoral Science Foundation(No.2022M713497)+1 种基金the Jiangxi Provincial Natural Science Foundation(No.20252BAC250115)the Jiangxi Provincial Department of Transportation Science and Technology Project(No.2022H0017)。
文摘Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.
基金supported by the National Key Research and Development Program of China(No.2022YFB3404202)the National Natural Science Foundation of China(No.52271103)the Jilin Scientific and Technological Development Program,China(Nos.20220301026GX,20210301041GX)。
文摘The impact of Mn addition on the microstructure,mechanical properties and corrosion behavior of T6-treated Al−Si−Mg−xMn(x=0.2−1.0 wt.%)alloys in a 3.5 wt.%NaCl solution was investigated.The results showed that adding 0.2 wt.%Mn to T6-treated Al−Si−Mg alloys enhanced the corrosion resistance by promoting the formation ofα-AlFeMnSi phase,characterized by smaller absolute Volta potential values compared to eutectic Si,β-AlFeSi andπ-AlFeMgSi phases.However,the addition of 0.5 wt.%Mn and 1.0 wt.%Mn to the T6-treated Al−Si−Mg alloys increased the size of theα-AlFeMnSi phase.This decreased the properties of T6-treated Al−Si−Mg alloys.Therefore,the optimum Mn content was 0.2 wt.%,providing a novel approach for synergistically enhancing mechanical properties and corrosion resistance of Al−Si−Mg alloys.
基金the National Natural Science Foundation of China (Nos. 52071179, 52271033)the Key Program of National Natural Science Foundation of China (No. 51931003)+2 种基金the Natural Science Foundation of Jiangsu Province, China (No. BK20221493)the Jiangsu Province Leading Edge Technology Basic Research Major Project, China (No. BK20222014)the Foundation of “Qinglan Project” for Colleges and Universities in Jiangsu Province, China。
文摘The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron concentration−relative electronegativity(VEC−REN)composite descriptor was developed to effectively predict the mechanical properties of HEBs.The results demonstrate that with a fixed VEC,the rise of the REN makes HEBs harder but more brittle when the electronegativity of doped TM atoms is lower than that of boron atoms.However,HEBs become softer and more ductile as REN increases if the doped TM atoms have higher electronegativity than boron atoms.The VEC−REN composite descriptor can accurately classify and predict the mechanical properties of HEBs with different components,which provides important theoretical guidance for the rapid design and development of novel high-entropy ceramic materials.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金Funded by Natural Science Foundation of Guangxi(No.2025GXNSFBA069565)Guangxi Science and Technology Program(No.AD25069101)Guangxi Bagui Scholars Fund。
文摘Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.
基金supported by the National Natural Science Foundation of China(No.51874368)。
文摘The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The microstructure analysis revealed that the tungsten phase in 95W-HEAs exhibited a nearly spherical morphology in the HEA binder matrix and the formation of a Cr−Mn oxide mixed phase was observed.The sintering temperature exerted a significant influence on the relative density,grain size,W−W contiguity,and mechanical properties of the alloys.The optimal performance was achieved when sintering at 1450℃,yielding a relative density of 96.61%,a W−W contiguity of 0.528,an average grain size of 18.97μm,a compressive strength of 2234.82 MPa,and a hardness of HV 400.6.The activation energy for the diffusion of tungsten in the liquid phase formed by HEA binder was calculated to be 354.514 kJ/mol,highlighting its role in controlling grain growth.
基金supported by the Presidential Foundation of CAEP(No.YZJJZQ2022006)the National Natural Science Foundation of China(Nos.22275173 and 22475179).
文摘The interfacial structure and its regulation play a crucial role in determining the overall performance of advanced functional composites.Weak interfacial interactions between carbon fibers and the matrix present a critical challenge limiting the general performance and functional applications of carbon fiberreinforced composites.In this paper,a novel strategy for bioinspired root-soil interfacial structure was presented to enhance the mechanical properties of polymer bonded explosives.A multiscale nanowire heterostructure was constructed through the in-situ growth of morphologically controllable zinc oxide nanowires on the carbon fiber surface via a facile hydrothermal method,with polydopamine as the interfacial reinforcement layer.This structure emulated the function of the"root",and combined with a network-distributed polymer binder representing the"soil",formed a robust root-soil interlocking interfacial structure within the polymer bonded explosives.Due to the multiscale interfacial reinforcement structure,the tensile strength of the polymer bonded explosives was visibly increased by 41%,the strain at the break by 110%,and the creep resistance by 51%with only 0.4 wt%filler adopted.The thermal stress resistance was improved by 57%owing to the synergistic enhancement of thermal conductivity and mechanical properties.This study provides new perspectives and insights for designing and constructing high-performance polymer bonded explosives and other functional composites.
基金supported by the National Natural Science Foundation of China(No.52271101)Suzhou Science and Technology Project,China(Nos.SYG202312,SJC2023005,SZS2023023)+1 种基金Nanjing Major Science and Technology Project,China(No.202309015)the Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology,China(No.ASMA202305)。
文摘To investigate the aging mechanisms and elucidate the correlations between unstable microstructure and performance in biodegradable Zn alloys,the accelerated aging experiment was conducted on a high-performance wrought Zn−0.1Mg alloy by annealing at 200℃ for varying durations.The findings reveal that the tensile strength of the alloy rapidly and significantly declines with prolonged annealing time,decreasing from 383 MPa for the as-received alloy to 102 MPa for the alloy subjected to 1440 min of annealing.The primary factors contributing to this considerable reduction in strength are static recrystallization,grain coarsening,and dislocation annihilation.Initially,the ductility of the alloy shows fluctuations,ultimately experiencing a marked decrease after extended annealing.This decline is linked to the grain growth and heightened texture intensity,while the unusual increase in ductility observed between 30 and 120 min of annealing is likely due to the formation of twins.In addition,due to rapid grain growth and an increase in precipitates and twins,the corrosion resistance of the alloy in Hank’s solution has worsened,with the corrosion rate rising from 0.037 to 0.069 mm/a following 300 min of annealing.
基金Funded by the National Natural Science Foundation of China(Nos.52404378 and 52371019)the Basic Scientific Research Project of Liaoning Provincial Education Department(No.JYTQN2023009)the Dalian Science&Technology Innovation Foundation Project(No.2024JJ11PT003)。
文摘W-CoFeNi WHAs(tungsten heavy alloys)were fabricated by powder metallurgy with sintering temperatures ranging from 1480 to 1560℃.The influence of sintering temperatures on microstructure evolutions and mechanical properties of W-CoFeNi WHAs was investigated.The experimental results show that near-spherical W grains are distributed in CoFeNi ternary multi-principal-elements alloy(MPEA)with the formation of W-richμphase in all W-CoFeNi WHAs.The volume fractions ofμphase and average W grain size increase with sintering temperatures changing from 1480 to 1560℃.The activation energy for W grain growth is significantly higher than that of traditional W-Ni-Fe and W-Ni-Co WHAs,which indicates grain coarsening behavior in CoFeNi MPEA became more difficult compared to the conventional binder alloys.W-CoFeNi sintered at 1480℃exhibits the highest yield strength of 698 MPa among all WHAs due to finer W grain size.The compressive strength and fracture strain of W-CoFeNi reduce when sintering temperatures rise from 1480 to 1560℃.
基金supported by the Sichuan Science and Technology Program(No.2023ZYD0285).
文摘To address the challenge that plasticity and strength cannot be synergistically enhanced in 30CrMnSiNi_(2)A fabricated by laser additive manufacturing,high performance samples were fabricated by laser powder bed fusion(LPBF)using the transformation-induced plasticity(TRIP)effect in this study.The optimization of the volumetric energy density(VED)resulted in an increase of the residual austenite(RA)content from 5.5%to 12.7%.Meanwhile,the martensite/austenite(M/A)island content was increased from 10.35%to 39.05%,and the morphology was transitioned from blocky to filmy structure.The phase transition during cooling triggered a competition between pre-martensite and bainite,which reduced the average grain size of the sample to 1.58μm.In addition,the elevated VED promoted the formation of fine carbides during the decomposition of M/A islands,triggering the Orowan effect,which effectively hindered dislocation motion.These microstructural enhancements obtained excellent tensile strength(1566±5.9 MPa)and elongation(14.7%±0.8%).The fracture morphology exhibited a combination of transgranular quasi-cleavage and ductile dimple fractures,indicating a balanced plasticity-strength synergy.This work demonstrates the potential of LPBF for manufacturing 30CrMnSiNi_(2)A components with intricate designs and superior mechanical properties.
基金supported by the National Natural Science Foundation of China(Nos.U23A20610,52164017,52064011,52274331,and 521043348)the Guizhou Provincial Basic Research Program(Natural Science)(Nos.ZK[2021]258 and ZK[2023]Zhongdian 020)+6 种基金the Guizhou Provincial Program on Commercialization of Scientific and Technological Achievements(No.[2021]086)the Natural Science Research Project of Guizhou Provincial Department of Education(No.[2022]041)the Key Research Projects in Higher Education Institutions of Henan Province(No.24B450003)the Zhengzhou Railway Vocational and Technical College School Scientific Research Project(No.2024KY015)the Guizhou Province Dual-Carbon and New Energy Technology Innovation and Development Research Institute Open Project(No.DCRE-2023-01)the Guizhou Provincial Science and Technology Projects(No.GCC[2023]017)supported by the State Key Laboratory of Advanced Metallurgy(No.K23-04)。
文摘In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt fluxes on the purification effect and mechanical properties of aluminum melt was investigated.The results indicate that lower refining temperatures and modified salt fluxes can effectively enhance the cleanliness of the aluminum melt.As the refining temperature increases,the large inclusions gradually increase.The addition of16wt.%Na_(3)AlF_(6) can dissolve and break up Al_2O_(3) inclusions,facilitating the separation of the aluminum melt and aluminum slag.The addition of 16wt.%Na3AlF6 and 2wt.%CaCO_(3) to the basic salt fluxes enables gas refinement,thereby further improving the cleanliness of the aluminum melt.Under the refining condition of 37wt.%NaCl-47wt.%KCl--16wt.%Na3AIF3-2wt.%CaCO_(3) at 740℃,better cleanliness and mechanical properties were obtained.The cleanliness and yield strength are approximately 99.99928%and 71.46 MPa,respectively.This work can offer valuable reference and theoretical insights for future research.
