In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix compo...In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix composites were prepared by semi-solid stirring and hot extrusion processes.The main objective is to study the effects of different contents of spherical Ti particles(0,3,and 5wt%)on the microstructure,mechanical properties and wear resistance of the composites.The results show that the addition of Ti particles can form a good interface bond with the matrix,and refine the undeformed coarse grains in the material,which has a certain increase in the hardness,yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the material.In addition,when subjected to friction grinding under a force of 100 N,compared with the matrix,the composite material reinforced with Ti particles shows a lower wear rate and friction coefficient,demonstrates higher wear resistance,and can be applied in more fields.展开更多
A Fe-12Cr-2W-0.2Zr-0.1Ti-0.35Y_(2)O_(3)ODS ferritic alloy was prepared by ball milling,hot isostatic pressing(HIP)and thermomechanical processing herein.The evolution of oxide nanoparticles(ONPs)with differ-ent interm...A Fe-12Cr-2W-0.2Zr-0.1Ti-0.35Y_(2)O_(3)ODS ferritic alloy was prepared by ball milling,hot isostatic pressing(HIP)and thermomechanical processing herein.The evolution of oxide nanoparticles(ONPs)with differ-ent intermediate annealing temperatures of thermomechanical processing and its effect on microstructure and mechanical properties of the ODS alloy were investigated.The result shows that the intermediate annealing temperatures played a decisive role in the size,morphology and structure of nanoparticles in the final alloy since this was attributed to the fact that fine particles were dissolved through dislocation shearing during cold deformation and then re-precipitated during subsequent heat treatment.The high intermediate annealing temperature promotes the growth of the near-spherical ONPs,while the ellip-soidal nanoparticles are developed at relatively low temperature.Meanwhile,the structural change of the ONPs was also facilitated by the dissolution-reprecipitation behavior.The predominant Y_(2)(Zr_(y)Ti_(1−y))_(2)O_(7)with cubic pyrochlore phase in as-HIPed alloy can be transformed into Y_(4)Zr_(3)O_(12)particles with rhom-bohedral structure during the thermomechanical treatment.However,compared with the change in size of ONPs,the change in morphology and structure of ONPs has no obvious influence on the mechanical strength.Different intermediate annealing temperatures play a different role in the coarsening of ONPs during thermomechanical treatment,which makes the alloy annealed at low temperature exhibiting more uniform distribution of ONPs and better mechanical properties.展开更多
This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to externa...This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.展开更多
Carbonaceous mudstone is a potential embankment filler in mountainous regions with limited high-quality materials;however,its engineering performance in highway embankments under complex environmental conditions remai...Carbonaceous mudstone is a potential embankment filler in mountainous regions with limited high-quality materials;however,its engineering performance in highway embankments under complex environmental conditions remains poorly understood.This study aimed to investigate the mechanical properties and failure mechanisms of carbonaceous mudstone filler under different temperature-moisture coupled conditions.Triaxial shear tests were conducted under four temperaturemoisture coupled conditions:dry-heat to dry-cold(DHDC),wet-cold to wet-heat(WCWH),dry-cold to wet-heat(DCWH),and dry-heat to wet-cold(DHWC).The effects of these conditions on the strength characteristics,relative breakage ratio,failure mode,and microscopic morphology were examined.A segmented prediction model based on the DuncanChang model was applied to validate the experimental results under the DHWC condition.The failure mechanisms under different conditions were also analyzed.The results indicate that the degradation of carbonaceous mudstone increases in the following order:DHDC,WCWH,DCWH,and DHWC.Under the DHDC condition,the stress-strain curves exhibit strain-softening behavior,while other conditions show strain-hardening behavior,with peak deviatoric stress occurring at 2%and 4%axial strains,respectively.The shear strength decreases by up to 40%under the DHWC condition but remains nearly unchanged under the DHDC condition,showing a positive correlation with particle breakage.As the number of cycles increases,the failure surfaces gradually move downward.Higher confining pressure shifts failure mode from shear failure to shear slip or localized compression,and eventually to overall compression or expansion failure.The modified Duncan-Chang model accurately predicts the experimental results.These findings provide important guidance for the application of carbonaceous mudstone filler in highway embankment construction in humid mountainous regions.展开更多
The particles of different shapes,multi-walled carbon nanotubes(CNTs)and graphene nanosheets(GNs),were used to modulate the mechanical properties and anisotropy of the magnets.It is found that the rodshaped CNTs can i...The particles of different shapes,multi-walled carbon nanotubes(CNTs)and graphene nanosheets(GNs),were used to modulate the mechanical properties and anisotropy of the magnets.It is found that the rodshaped CNTs can increase the bending strength ratio of the c and a axes of the magnet from 1.114 to1.254,while flake-like GNs decrease it from 1.114 to 0.989.In-depth analysis indicates that the mechanical anisotropy of the magnet is greatly influenced by the distribution and thickness of the rare earth phase(RE phase),with the thicker RE phase demonstrating greater capability of blunting at the crack tip.Using the finite element method,it is found that the strength of brittle material can be enhanced by the additive particles owing to the inhibition of crack initiation and stress conduction,as well as the deflection of the crack.The flake-like GNs weaken the mechanical anisotropy of magnets by varying the distribution of RE phase and form a shell encompassing the main phase.Nonetheless,the alignment of CNTs occurring in the process of magnetic orientation process can significantly increase the mechanical anisotropy of the magnet.In particular,when loaded in the parallel c axis(c_(‖))direction,the cracks need to penetrate the main phase due to the strong frictional interlocking between CNTs and the main phase grains,in which case the bending strength will be significantly increased.By contrast,when loaded in the vertical c axis(c_(⊥))direction,the cracks can bypass the rod-like particles and change directions of propagation.As such,the increase in bending strength is smaller than that in loading along with the cll direction.展开更多
Achieving a balance between strength and ductility is of utmost importance for Magnesium matrix composites(MMCs).In this study,AZ31 sheets reinforced with 0.4,0.7,and 1.0 wt.%nano-TC4(Ti-6Al-4V)particles were prepared...Achieving a balance between strength and ductility is of utmost importance for Magnesium matrix composites(MMCs).In this study,AZ31 sheets reinforced with 0.4,0.7,and 1.0 wt.%nano-TC4(Ti-6Al-4V)particles were prepared by stir casting coupled with hot extrusion process.In addition to analyzing the microstructure of the extruded composite sheets,the tensile properties were also investigated.The results showed that the incorporation of nano-TC4 particles led to a reduction in texture strength and a refinement of the grains.As a result of the formation of semicoherent orientation relations at the Ti Al/Mg and Ti3Al/Mg interfaces,strong interfacial bonding was established between the TC4 nanoparticles and the AZ31 matrix.Compared with the AZ31 sheet,the composite sheet with 0.7 wt.%nano-TC4 particles exhibited the best comprehensive tensile properties.The primary factors contributing to the improvement of mechanical properties were mismatch of coefficient of thermal expansion(CTE)between TC4 nanoparticles and AZ31 matrix,grain refinement,Orowan strengthening mechanism,and strong interfacial bonding.展开更多
Over the past several decades,the integration of IONs into EP emerged as an effective method for enhancing its mechanical properties.Nevertheless,challenges remain,especially with u-IONs,where the interfacial strength...Over the past several decades,the integration of IONs into EP emerged as an effective method for enhancing its mechanical properties.Nevertheless,challenges remain,especially with u-IONs,where the interfacial strength with EP is suboptimal,resulting in aggregation within the EP matrix and a subsequent deterioration in the mechanical performance of u-ION/EP nanocomposites.In this comprehensive review,we explored advanced chemical modification techniques tailored for IONs incorporated into EP,providing a detailed examination of the mechanical characteristics of surface cm-ION/EP nanocomposites.This review investigates various chemical modification methods and their distinct impacts on the mechanical attributes of the resulting EP nanocomposites.Special emphasis is given to addressing the persistent challenges of inadequate interfacial strength and aggregation.Furthermore,this article examines prospective surface modification approaches for inorganic oxide nanoparticles,offering a visionary outlook on methods to improve the mechanical performance of EP in future.展开更多
The blocky LPSO particles were modulated by single-directional and multi-directional forging,and the effect of blocky LPSO particles on the anisotropy of mechanical properties of Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy forged...The blocky LPSO particles were modulated by single-directional and multi-directional forging,and the effect of blocky LPSO particles on the anisotropy of mechanical properties of Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy forged parts was investigated.In the present work,3D processing maps are established,and the forming domain that is both stable and power efficient is in the temperature range from 430 to 500℃ and strain rate range from 0.001 to 0.06 s^(-1),which is used to guide the single-directional forging(SDF)and multi-directional forging(MDF)experiments.The tensile mechanical properties reveal that the blocky LPSO particles have an influence on the mechanical anisotropy,especially in terms of the elongation anisotropy.The blocky LPSO particles after the MDF process have a more regular shape and smaller size and are homogeneously distributed,which is responsible for the low anisotropy of the elongation.In addition,the age-hardening capability of the MDF part is higher than that of the SDF part.展开更多
In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles ...In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles on the microstructural evolution of the AZ91 alloy was investigated.The presence of NbB_(2)was shown to have a grain-refining effect on the AZ91 alloy and promoted dynamic recrystallization(DRX)and precipitation of fine Mg_(17)Al_(12)phases via particle-stimulated nucleation(PSN).Tensile testing revealed substantial enhancements in the ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of the as-rolled AZ91 alloy,with values of 379 MPa,292 MPa,and 14.7%,respectively,owing to the incorporation of NbB_(2)particles.Annealing led to further enhancements in EL with slight reductions in UTS and YS(360 MPa,252 MPa,and 16.8%,respectively).Owing to grain refinement and the PSN effect of the NbB_(2)particles,a significant number of geometrically necessary dislocations(GNDs)were induced in the matrix during the rolling process,which reduces the nucleation barrier and increases the number of nucleation sites for the recrystallized grains and Mg_(17)Al_(12)precipitates.Meanwhile,many residual dislocations and fine Mg_(17)Al_(12)precipitates in the as-rolled alloys were annihilated during annealing,resulting in slight grain growth and coarsening.The strengthening mechanism of the NbB_(2)/AZ91 composite are mainly associated with grain-refinement strengthening,particle-induced dislocation strengthening,strengthening resulting from mismatching coefficients of thermal expansion(CTE),and heterodeformation-induced(HDI)strengthening.Textural weakening,increased activation of non-basal slip systems,more-uniform strain patterns resulting from NbB_(2)particles,and precipitation are mainly responsible for enhancing ductility.展开更多
Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate indiv...Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
The functional properties of glasses are governed by their formation history and the complex relaxation processes they undergo.However,under extreme conditions,glass behaviors are still elusive.In this study,we employ...The functional properties of glasses are governed by their formation history and the complex relaxation processes they undergo.However,under extreme conditions,glass behaviors are still elusive.In this study,we employ simulations with varied protocols to evaluate the effectiveness of different descriptors in predicting mechanical properties across both low-and high-pressure regimes.Our findings demonstrate that conventional structural and configurational descriptors fail to correlate with the mechanical response following pressure release,whereas the activation energy descriptor exhibits robust linearity with shear modulus after correcting for pressure effects.Notably,the soft mode parameter emerges as an ideal and computationally efficient alternative for capturing this mechanical behavior.These findings provide critical insights into the influence of pressure on glassy properties,integrating the distinct features of compressed glasses into a unified theoretical framework.展开更多
Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ...Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.展开更多
The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investig...The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.展开更多
The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in ...The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in extruded Mg-Y-Nd-Zr alloys by Sm addition.Sm promotes dynamic recrystallization,activates non-basal slip systems and weakens basal texture intensity,leading to the sub-grain lamellar structure and rare earth texture.The EWS2 alloy exhibits an outstanding combination of high yield strength(328 MPa)and ductility(15.1%).Furthermore,the fragmented second phases in the Sm-containing alloy are uniformly distributed,reducing the subsequent corrosion driving force after micro-galvanic corrosion and facilitating the growth of a more passivating and compact corrosion film.These combined effects contribute to the lowest degradation rate in the EWS2 alloy.This study demonstrates the correlation between microstructure and properties in Sm-containing WE series alloys,providing insights for the design of other high performance magnesium alloys.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepar...The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.展开更多
In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt flux...In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt fluxes on the purification effect and mechanical properties of aluminum melt was investigated.The results indicate that lower refining temperatures and modified salt fluxes can effectively enhance the cleanliness of the aluminum melt.As the refining temperature increases,the large inclusions gradually increase.The addition of16wt.%Na_(3)AlF_(6) can dissolve and break up Al_2O_(3) inclusions,facilitating the separation of the aluminum melt and aluminum slag.The addition of 16wt.%Na3AlF6 and 2wt.%CaCO_(3) to the basic salt fluxes enables gas refinement,thereby further improving the cleanliness of the aluminum melt.Under the refining condition of 37wt.%NaCl-47wt.%KCl--16wt.%Na3AIF3-2wt.%CaCO_(3) at 740℃,better cleanliness and mechanical properties were obtained.The cleanliness and yield strength are approximately 99.99928%and 71.46 MPa,respectively.This work can offer valuable reference and theoretical insights for future research.展开更多
The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron co...The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron concentration−relative electronegativity(VEC−REN)composite descriptor was developed to effectively predict the mechanical properties of HEBs.The results demonstrate that with a fixed VEC,the rise of the REN makes HEBs harder but more brittle when the electronegativity of doped TM atoms is lower than that of boron atoms.However,HEBs become softer and more ductile as REN increases if the doped TM atoms have higher electronegativity than boron atoms.The VEC−REN composite descriptor can accurately classify and predict the mechanical properties of HEBs with different components,which provides important theoretical guidance for the rapid design and development of novel high-entropy ceramic materials.展开更多
基金National Key Research and Development Program of China(2022YFB3708400)the Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006)the Guangdong Provincial Academy of Sciences Special Funds Project for Building Domestic First-class Research Institutions Action(2020GDASYL-20200101001).
文摘In the research of magnesium-based composites,the plasticity and strength of the materials are the most critical factors affecting their applications.In this paper,Ti particle-reinforced Mg-9Gd-4Y-2Mn-1Zn matrix composites were prepared by semi-solid stirring and hot extrusion processes.The main objective is to study the effects of different contents of spherical Ti particles(0,3,and 5wt%)on the microstructure,mechanical properties and wear resistance of the composites.The results show that the addition of Ti particles can form a good interface bond with the matrix,and refine the undeformed coarse grains in the material,which has a certain increase in the hardness,yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the material.In addition,when subjected to friction grinding under a force of 100 N,compared with the matrix,the composite material reinforced with Ti particles shows a lower wear rate and friction coefficient,demonstrates higher wear resistance,and can be applied in more fields.
基金financially supported by the Research Fund of Nuclear Materials of China Atomic Energy Authority(No.ICNM-2023-YZ-03).
文摘A Fe-12Cr-2W-0.2Zr-0.1Ti-0.35Y_(2)O_(3)ODS ferritic alloy was prepared by ball milling,hot isostatic pressing(HIP)and thermomechanical processing herein.The evolution of oxide nanoparticles(ONPs)with differ-ent intermediate annealing temperatures of thermomechanical processing and its effect on microstructure and mechanical properties of the ODS alloy were investigated.The result shows that the intermediate annealing temperatures played a decisive role in the size,morphology and structure of nanoparticles in the final alloy since this was attributed to the fact that fine particles were dissolved through dislocation shearing during cold deformation and then re-precipitated during subsequent heat treatment.The high intermediate annealing temperature promotes the growth of the near-spherical ONPs,while the ellip-soidal nanoparticles are developed at relatively low temperature.Meanwhile,the structural change of the ONPs was also facilitated by the dissolution-reprecipitation behavior.The predominant Y_(2)(Zr_(y)Ti_(1−y))_(2)O_(7)with cubic pyrochlore phase in as-HIPed alloy can be transformed into Y_(4)Zr_(3)O_(12)particles with rhom-bohedral structure during the thermomechanical treatment.However,compared with the change in size of ONPs,the change in morphology and structure of ONPs has no obvious influence on the mechanical strength.Different intermediate annealing temperatures play a different role in the coarsening of ONPs during thermomechanical treatment,which makes the alloy annealed at low temperature exhibiting more uniform distribution of ONPs and better mechanical properties.
基金supported by the National Natural Science Foundation of China(No.12262020).
文摘This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.
基金the financial support by the National Natural Science Foundation of China(52378440,42477143)the Key Science and Technology Program in the Transportation Industry(2022-MS1-032,2022-MS5-125)+2 种基金the Postgraduate Scientific Research Innovation Project of Hunan Province(CX20251302)the Science and Technology Innovation Program of Hunan Province(2024RC3166)the Guangxi Key Research and Development Program(AB23075184)。
文摘Carbonaceous mudstone is a potential embankment filler in mountainous regions with limited high-quality materials;however,its engineering performance in highway embankments under complex environmental conditions remains poorly understood.This study aimed to investigate the mechanical properties and failure mechanisms of carbonaceous mudstone filler under different temperature-moisture coupled conditions.Triaxial shear tests were conducted under four temperaturemoisture coupled conditions:dry-heat to dry-cold(DHDC),wet-cold to wet-heat(WCWH),dry-cold to wet-heat(DCWH),and dry-heat to wet-cold(DHWC).The effects of these conditions on the strength characteristics,relative breakage ratio,failure mode,and microscopic morphology were examined.A segmented prediction model based on the DuncanChang model was applied to validate the experimental results under the DHWC condition.The failure mechanisms under different conditions were also analyzed.The results indicate that the degradation of carbonaceous mudstone increases in the following order:DHDC,WCWH,DCWH,and DHWC.Under the DHDC condition,the stress-strain curves exhibit strain-softening behavior,while other conditions show strain-hardening behavior,with peak deviatoric stress occurring at 2%and 4%axial strains,respectively.The shear strength decreases by up to 40%under the DHWC condition but remains nearly unchanged under the DHDC condition,showing a positive correlation with particle breakage.As the number of cycles increases,the failure surfaces gradually move downward.Higher confining pressure shifts failure mode from shear failure to shear slip or localized compression,and eventually to overall compression or expansion failure.The modified Duncan-Chang model accurately predicts the experimental results.These findings provide important guidance for the application of carbonaceous mudstone filler in highway embankment construction in humid mountainous regions.
基金Project supported by National Key R&D Project of China(2022YFB3505400)Jiangxi Natural Science Foundation Youth Fund(20232BAB214011)+3 种基金the Young Elite Scientists Sponsorship Program by CAST(2022QNRC001)National Natural Science Foundation of China(52361033)Ministry of Industry and Information Technology Heavy Rare Earth Special Use of Sintered NdFeB Project(TC220H06J)Academic and Technical Leaders in Major Disciplines in Jiangxi Province(20225BCJ23007)。
文摘The particles of different shapes,multi-walled carbon nanotubes(CNTs)and graphene nanosheets(GNs),were used to modulate the mechanical properties and anisotropy of the magnets.It is found that the rodshaped CNTs can increase the bending strength ratio of the c and a axes of the magnet from 1.114 to1.254,while flake-like GNs decrease it from 1.114 to 0.989.In-depth analysis indicates that the mechanical anisotropy of the magnet is greatly influenced by the distribution and thickness of the rare earth phase(RE phase),with the thicker RE phase demonstrating greater capability of blunting at the crack tip.Using the finite element method,it is found that the strength of brittle material can be enhanced by the additive particles owing to the inhibition of crack initiation and stress conduction,as well as the deflection of the crack.The flake-like GNs weaken the mechanical anisotropy of magnets by varying the distribution of RE phase and form a shell encompassing the main phase.Nonetheless,the alignment of CNTs occurring in the process of magnetic orientation process can significantly increase the mechanical anisotropy of the magnet.In particular,when loaded in the parallel c axis(c_(‖))direction,the cracks need to penetrate the main phase due to the strong frictional interlocking between CNTs and the main phase grains,in which case the bending strength will be significantly increased.By contrast,when loaded in the vertical c axis(c_(⊥))direction,the cracks can bypass the rod-like particles and change directions of propagation.As such,the increase in bending strength is smaller than that in loading along with the cll direction.
基金financially supported by National Key Research and Development Program of China(2022YFB3708400)the Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006)+1 种基金the Guangdong provincial key laboratory project(2023B1212060043)the Guangdong Academy of Science Fund(2020GDASYL-20200101001)。
文摘Achieving a balance between strength and ductility is of utmost importance for Magnesium matrix composites(MMCs).In this study,AZ31 sheets reinforced with 0.4,0.7,and 1.0 wt.%nano-TC4(Ti-6Al-4V)particles were prepared by stir casting coupled with hot extrusion process.In addition to analyzing the microstructure of the extruded composite sheets,the tensile properties were also investigated.The results showed that the incorporation of nano-TC4 particles led to a reduction in texture strength and a refinement of the grains.As a result of the formation of semicoherent orientation relations at the Ti Al/Mg and Ti3Al/Mg interfaces,strong interfacial bonding was established between the TC4 nanoparticles and the AZ31 matrix.Compared with the AZ31 sheet,the composite sheet with 0.7 wt.%nano-TC4 particles exhibited the best comprehensive tensile properties.The primary factors contributing to the improvement of mechanical properties were mismatch of coefficient of thermal expansion(CTE)between TC4 nanoparticles and AZ31 matrix,grain refinement,Orowan strengthening mechanism,and strong interfacial bonding.
基金supported by the National Key Research and Development of China(No.2018YFA0702804).
文摘Over the past several decades,the integration of IONs into EP emerged as an effective method for enhancing its mechanical properties.Nevertheless,challenges remain,especially with u-IONs,where the interfacial strength with EP is suboptimal,resulting in aggregation within the EP matrix and a subsequent deterioration in the mechanical performance of u-ION/EP nanocomposites.In this comprehensive review,we explored advanced chemical modification techniques tailored for IONs incorporated into EP,providing a detailed examination of the mechanical characteristics of surface cm-ION/EP nanocomposites.This review investigates various chemical modification methods and their distinct impacts on the mechanical attributes of the resulting EP nanocomposites.Special emphasis is given to addressing the persistent challenges of inadequate interfacial strength and aggregation.Furthermore,this article examines prospective surface modification approaches for inorganic oxide nanoparticles,offering a visionary outlook on methods to improve the mechanical performance of EP in future.
基金supports of the National Key Research and Development Program of China(Grant No.2021YFB3501005)the National Natural Science Foundation of China(Grant No.52071208)the Key R&D program of Shanxi Province(International Cooperation)(Grant No.201903D421036).
文摘The blocky LPSO particles were modulated by single-directional and multi-directional forging,and the effect of blocky LPSO particles on the anisotropy of mechanical properties of Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy forged parts was investigated.In the present work,3D processing maps are established,and the forming domain that is both stable and power efficient is in the temperature range from 430 to 500℃ and strain rate range from 0.001 to 0.06 s^(-1),which is used to guide the single-directional forging(SDF)and multi-directional forging(MDF)experiments.The tensile mechanical properties reveal that the blocky LPSO particles have an influence on the mechanical anisotropy,especially in terms of the elongation anisotropy.The blocky LPSO particles after the MDF process have a more regular shape and smaller size and are homogeneously distributed,which is responsible for the low anisotropy of the elongation.In addition,the age-hardening capability of the MDF part is higher than that of the SDF part.
基金supported by the National Natural Science Foundation of China[52171030]the National Key Research and Development Program of China[2018YFA0702903]。
文摘In this study,a NbB_(2)/AZ91 composite exhibiting desirable mechanical properties was fabricated using a sample casting technique,followed by hard-plate rolling and short-term annealing.The effect of NbB_(2)particles on the microstructural evolution of the AZ91 alloy was investigated.The presence of NbB_(2)was shown to have a grain-refining effect on the AZ91 alloy and promoted dynamic recrystallization(DRX)and precipitation of fine Mg_(17)Al_(12)phases via particle-stimulated nucleation(PSN).Tensile testing revealed substantial enhancements in the ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of the as-rolled AZ91 alloy,with values of 379 MPa,292 MPa,and 14.7%,respectively,owing to the incorporation of NbB_(2)particles.Annealing led to further enhancements in EL with slight reductions in UTS and YS(360 MPa,252 MPa,and 16.8%,respectively).Owing to grain refinement and the PSN effect of the NbB_(2)particles,a significant number of geometrically necessary dislocations(GNDs)were induced in the matrix during the rolling process,which reduces the nucleation barrier and increases the number of nucleation sites for the recrystallized grains and Mg_(17)Al_(12)precipitates.Meanwhile,many residual dislocations and fine Mg_(17)Al_(12)precipitates in the as-rolled alloys were annihilated during annealing,resulting in slight grain growth and coarsening.The strengthening mechanism of the NbB_(2)/AZ91 composite are mainly associated with grain-refinement strengthening,particle-induced dislocation strengthening,strengthening resulting from mismatching coefficients of thermal expansion(CTE),and heterodeformation-induced(HDI)strengthening.Textural weakening,increased activation of non-basal slip systems,more-uniform strain patterns resulting from NbB_(2)particles,and precipitation are mainly responsible for enhancing ductility.
基金National Natural Science Foundation of China(52172108)National Key R&D Program of China(2022YFB3707700)Strategic Priority Research Program of the Chinese Academy of Sciences(XDC0144005)。
文摘Silicon carbide fibers are considered ideal reinforcing materials for ceramic matrix composites due to their excellent mechanical properties and high-temperature performance.Different types of fibers necessitate individual investigation due to variations in their composition and fabrication processes.This study presents a comprehensive investigation into evolution of the mechanical properties,surface microstructure,and composition of Shicolon-Ⅱ fibers subjected to argon heat treatment at temperatures ranging from 1300℃to 1700℃.The Shicolon-Ⅱ fibers are composed of small-sized β-SiC grains,SiC_(x)O_(y) amorphous phase,and a minor amount of graphite microcrystals.Following treatment in an argon atmosphere at 1300℃,the fibers maintain a monofilament tensile strength of 3.620 GPa,corresponding to a retention of 98.32%.This strength diminishes to 2.875 GPa,equating to a retention of 78.08%,after treatment at 1500℃.The reduction in mechanical properties of the fibers can be ascribed to the decomposition of the amorphous phase and the growth of β-SiC grains.Furthermore,creep resistance is an essential factor influencing the long-term performance of composite materials.After treatment at temperatures above 1400℃,the high-temperature creep resistance of the fibers is significantly enhanced due to growth of β-SiC grains.This study offers valuable theoretical insights into high-temperature applications of second-generation fibers,contributing to an enhanced understanding of their performance under extreme conditions.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金supported by the National Natural Science Foundation of China (Grant Nos.T2325004 and 52161160330)the National Natural Science Foundation of China (Grants No.12504233)+2 种基金Advanced MaterialsNational Science and Technology Major Project (Grant No.2024ZD0606900)the Talent Hub for “AI+New Materials” Basic Researchthe Key Research and Development Program of Ningbo (Grant No.2025Z088)。
文摘The functional properties of glasses are governed by their formation history and the complex relaxation processes they undergo.However,under extreme conditions,glass behaviors are still elusive.In this study,we employ simulations with varied protocols to evaluate the effectiveness of different descriptors in predicting mechanical properties across both low-and high-pressure regimes.Our findings demonstrate that conventional structural and configurational descriptors fail to correlate with the mechanical response following pressure release,whereas the activation energy descriptor exhibits robust linearity with shear modulus after correcting for pressure effects.Notably,the soft mode parameter emerges as an ideal and computationally efficient alternative for capturing this mechanical behavior.These findings provide critical insights into the influence of pressure on glassy properties,integrating the distinct features of compressed glasses into a unified theoretical framework.
基金Funded by the National Science Foundation of China(No.52368031)the China Postdoctoral Science Foundation(No.2022M713497)+1 种基金the Jiangxi Provincial Natural Science Foundation(No.20252BAC250115)the Jiangxi Provincial Department of Transportation Science and Technology Project(No.2022H0017)。
文摘Utilization of ceramic wastes to fabricate concrete can not only effectively dispose the wastes,but also reduce the energy and source consumptions.Therefore,we fabricated a green ultra high performance concrete using ceramic waste powder(CWP)to replace 55%of cement,and ceramic waste aggregate(CWA)to replace 100%natural quartz sand.However,high content of ceramic wastes will harm the concrete performance including workability and mechanical properties.Therefore,a low-cost and low carbon nano-calcium carbonate(NC)was introduced to compensate for the defects caused by large amounts of CWP and CWA to workability and mechanical behavior.The experimental results show that the workability of ultra high performance concrete with large amounts of CWP and CWA(UHPCLCC)increases by 28.57%with NC content of 5%.Moreover,the flexural strengths,fracture energy,compressive strengths,and compressive toughness of UHPCLCC increase up to 29.6%,56.5%,20.4%,and 37.6%,respectively,which is caused by the nano-core effect of NC.
文摘The influences of silicon addition to commercially pure magnesium(CP Mg)and cooling rate during solidification on the as-cast microstructure and shear mechanical properties of Mg-Si alloys were systematically investigated.For this purpose,the Mg-0.6Si,Mg-1.34Si,and Mg-3Si(wt%)alloys were considered as hypoeutectic,eutectic,and hypereutectic alloys,respectively.By decreasing the geometrical modulus of the solidifying section(increasing cooling rate),remarkable grain refinement,refining the dendrite arm spacing(DAS),and modification of Mg_(2)Si particles were achieved.Moreover,the grain size was refined via Si addition in the hypoeutectic range,while coarsening of grain size at high Si concentrations was observed.The results of shear punch testing and hardness measurements demonstrated that the ultimate shear strength(USS)and hardness increased by increasing the cooling rate during solidification.Moreover,Si addition generally improved hardness,while the highest USS level was achieved for the eutectic alloy due to the fine grain size and strengthening effect of the eutectic constituent.However,regarding the hypereutectic Mg-3Si alloy that exhibited high hardness,the shear properties were inferior due to the detrimental effect of the primary Mg_(2)Si particles.Finally,the results were discussed with consideration of the relationship between strength and hardness,for which the critical effect of Si was clarified.
基金supported by the National Natural Science Foundation of China(Nos.52201119,52371108)Frontier Exploration Project of Longmen Laboratory,China(No.LMQYTSKT014)The Joint Fund of Henan Science and Technology R&D Plan of China(No.242103810056).
文摘The strength-ductility trade-off in magnesium alloys remains a critical challenge urgently requiring resolution in their engineering applications.In this study,both mechanical and corrosion properties are enhanced in extruded Mg-Y-Nd-Zr alloys by Sm addition.Sm promotes dynamic recrystallization,activates non-basal slip systems and weakens basal texture intensity,leading to the sub-grain lamellar structure and rare earth texture.The EWS2 alloy exhibits an outstanding combination of high yield strength(328 MPa)and ductility(15.1%).Furthermore,the fragmented second phases in the Sm-containing alloy are uniformly distributed,reducing the subsequent corrosion driving force after micro-galvanic corrosion and facilitating the growth of a more passivating and compact corrosion film.These combined effects contribute to the lowest degradation rate in the EWS2 alloy.This study demonstrates the correlation between microstructure and properties in Sm-containing WE series alloys,providing insights for the design of other high performance magnesium alloys.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the National Natural Science Foundation of China(Nos.52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship·Program by CAST(No.2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.
基金supported by the National Natural Science Foundation of China(Nos.U23A20610,52164017,52064011,52274331,and 521043348)the Guizhou Provincial Basic Research Program(Natural Science)(Nos.ZK[2021]258 and ZK[2023]Zhongdian 020)+6 种基金the Guizhou Provincial Program on Commercialization of Scientific and Technological Achievements(No.[2021]086)the Natural Science Research Project of Guizhou Provincial Department of Education(No.[2022]041)the Key Research Projects in Higher Education Institutions of Henan Province(No.24B450003)the Zhengzhou Railway Vocational and Technical College School Scientific Research Project(No.2024KY015)the Guizhou Province Dual-Carbon and New Energy Technology Innovation and Development Research Institute Open Project(No.DCRE-2023-01)the Guizhou Provincial Science and Technology Projects(No.GCC[2023]017)supported by the State Key Laboratory of Advanced Metallurgy(No.K23-04)。
文摘In the casting process of 1060 industrial pure aluminum,the inclusions in the aluminum melt significantly affect the product quality.In this study,the influence of refining temperature and the composition of salt fluxes on the purification effect and mechanical properties of aluminum melt was investigated.The results indicate that lower refining temperatures and modified salt fluxes can effectively enhance the cleanliness of the aluminum melt.As the refining temperature increases,the large inclusions gradually increase.The addition of16wt.%Na_(3)AlF_(6) can dissolve and break up Al_2O_(3) inclusions,facilitating the separation of the aluminum melt and aluminum slag.The addition of 16wt.%Na3AlF6 and 2wt.%CaCO_(3) to the basic salt fluxes enables gas refinement,thereby further improving the cleanliness of the aluminum melt.Under the refining condition of 37wt.%NaCl-47wt.%KCl--16wt.%Na3AIF3-2wt.%CaCO_(3) at 740℃,better cleanliness and mechanical properties were obtained.The cleanliness and yield strength are approximately 99.99928%and 71.46 MPa,respectively.This work can offer valuable reference and theoretical insights for future research.
基金the National Natural Science Foundation of China (Nos. 52071179, 52271033)the Key Program of National Natural Science Foundation of China (No. 51931003)+2 种基金the Natural Science Foundation of Jiangsu Province, China (No. BK20221493)the Jiangsu Province Leading Edge Technology Basic Research Major Project, China (No. BK20222014)the Foundation of “Qinglan Project” for Colleges and Universities in Jiangsu Province, China。
文摘The composition−property relationship of 18 quaternary high entropy diborides(HEBs)consisting of boron and IVB,VB and VIB transition metals(TM)was investigated using first-principles calculations.A valence electron concentration−relative electronegativity(VEC−REN)composite descriptor was developed to effectively predict the mechanical properties of HEBs.The results demonstrate that with a fixed VEC,the rise of the REN makes HEBs harder but more brittle when the electronegativity of doped TM atoms is lower than that of boron atoms.However,HEBs become softer and more ductile as REN increases if the doped TM atoms have higher electronegativity than boron atoms.The VEC−REN composite descriptor can accurately classify and predict the mechanical properties of HEBs with different components,which provides important theoretical guidance for the rapid design and development of novel high-entropy ceramic materials.
