Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CR...Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CRC)under the influence of dynamic load parameters were studied.The main results are as follows:1)Dynamic load increases the rheological properties and damage fracture development of CRC.With the increase of the amplitude and frequency of the dynamic load,the number of dynamic load cycles required for the failure of the CRC decreases,the irreversible strain increases,and the failure of sample accelerates;2)The AE positioning events during the loading process of the specimen decrease with the increase of the dynamic load amplitude,and increase with the increase of the dynamic load frequency;3)The fractal dimension,total energy and cumulative elastic energy of the broken particles of the CRC increase with the increase of the amplitude and frequency of the dynamic load.The fractal dimension corresponding to the increase of the dynamic load frequency is larger,and the energy and cumulative elastic energy corresponding to the increase of the dynamic load amplitude are larger.展开更多
Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failur...Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failure of roadway support,thus threatening the safety of the roadway.In this paper,the variable angle shear test of drilled specimens under the action of static and dynamic loads is used to study the evolution of mechanical parameters of the specimens and their influence on the plastic zone of the sur-rounding rock.The shear strength decreases linearly with the increase of drilling diameter.With the increase of pre-static load level and dynamic load amplitude,the cohesion first increases and then decreases,and the internal friction angle decreases.Moreover,the shear failure surface changes from rough to smooth.The reasons include that the static load enhances the tooth cutting effect and the repeated friction of cracks caused by the dynamic load.Borehole pressure relief leads to an increase in the radius of the plastic zone of the surrounding rock following a quadratic function.The research results of this paper provide a theoretical basis for designing drilling unloading parameters and supporting parameters for rock burst roadways.展开更多
Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the ...Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.展开更多
Coal and gas outbursts are dynamic disasters in which a large mass of gas and coal suddenly emerges in a mining space within a split second.The interaction between the gas pressure and stress environment is one of the...Coal and gas outbursts are dynamic disasters in which a large mass of gas and coal suddenly emerges in a mining space within a split second.The interaction between the gas pressure and stress environment is one of the key factors that induce coal and gas outbursts.In this study,first,the coupling relationship between the gas pressure in the coal body ahead of the working face and the dynamic load was investigated using experimental observations,numerical simulations,and mine-site investigations.It was observed that the impact rate of the dynamic load on the gas-bearing coal can significantly change the gas pressure.The faster the impact rate,the speedier the increase in gas pressure.Moreover,the gas pressure rise was faster closer to the impact interface.Subsequently,based on engineering background,we proposed three models of stress and gas pressure distribution in the coal body ahead of the working face:static load,stress disturbance,and dynamic load conditions.Finally,the gas pressure distribution and outburst mechanism were investigated.The high concentration of gas pressure appearing at the coal body ahead of the working face was caused by the dynamic load.The gas pressure first increased gradually to a peak value and then decreased with increasing distance from the working face.The increase in gas pressure plays a major role in outburst initiation by resulting in the ability to more easily reach the critical points needed for outburst initiation.Moreover,the stronger the dynamic load,the greater the outburst initiation risk.The results of this study provide practical guidance for the early warning and prevention of coal and gas outbursts.展开更多
The study of high-energy and low-vulnerability propellants is important for the power performance and safety of solid propellant rocket motors.The modified split Hopkinson pressure bar(SHPB)tests are performed on two ...The study of high-energy and low-vulnerability propellants is important for the power performance and safety of solid propellant rocket motors.The modified split Hopkinson pressure bar(SHPB)tests are performed on two kinds of propellant with different crosslinking density to study the dynamic mechanical responses and damage-ignition mechanism.SHPB apparatus is equipped with a highperformance infrared camera and high-speed camera to capture the deformation,damage-ignition feature and temperature evolution images in the impact process.The results suggested that the mechanical responses and damage-ignition mechanism of the propellants were affected by the strain rates and crosslinking density.The damage-ignition degree is more intense and the reaction occurs earlier with the increase of strain rates.For propellant 1 with higher crosslinking density,the critical ignition strain rate is 4500 s^(-1).Two kinds of propellants show different ignition mechanism,i.e.crack generation,propagation and final fracture for propellant 1 while viscous shear flow for propellant 2.Meanwhile,the SEM images also reveal the difference of damage-ignition mechanism of the two kinds of propellants.Finally,the ignition mechanism under different strain rates and critical ignition strain rate of propellants are further explained by the theoretical calculation of temperature variations.展开更多
Rock failure phenomena,such as rockburst,slabbing(or spalling) and zonal disintegration,related to deep underground excavation of hard rocks are frequently reported and pose a great threat to deep mining.Currently,the...Rock failure phenomena,such as rockburst,slabbing(or spalling) and zonal disintegration,related to deep underground excavation of hard rocks are frequently reported and pose a great threat to deep mining.Currently,the explanation for these failure phenomena using existing dynamic or static rock mechanics theory is not straightforward.In this study,new theory and testing method for deep underground rock mass under coupled static-dynamic loading are introduced.Two types of coupled loading modes,i.e.'critical static stress + slight disturbance' and 'elastic static stress + impact disturbance',are proposed,and associated test devices are developed.Rockburst phenomena of hard rocks under coupled static-dynamic loading are successfully reproduced in the laboratory,and the rockburst mechanism and related criteria are demonstrated.The results of true triaxial unloading compression tests on granite and red sandstone indicate that the unloading can induce slabbing when the confining pressure exceeds a certain threshold,and the slabbing failure strength is lower than the shear failure strength according to the conventional Mohr-Column criterion.Numerical results indicate that the rock unloading failure response under different in situ stresses and unloading rates can be characterized by an equivalent strain energy density.In addition,we present a new microseismic source location method without premeasuring the sound wave velocity in rock mass,which can efficiently and accurately locate the rock failure in hard rock mines.Also,a new idea for deep hard rock mining using a non-explosive continuous mining method is briefly introduced.展开更多
Gas hydrate(hereinafter,"hydrate"for short)in the marine environment mostly lies in weakly consolidated sediments,so its undisturbed coring is difficult and costly.In view of this,it is necessary to understa...Gas hydrate(hereinafter,"hydrate"for short)in the marine environment mostly lies in weakly consolidated sediments,so its undisturbed coring is difficult and costly.In view of this,it is necessary to understand the relationship between acoustic properties and elastic mechanical properties of hydrates through laboratory experiments.In this paper,samples of hydrate sediments were prepared indoors.Then,petrophysical experiments were carried out on these samples to measure the electric parameters and acoustic parameters of hydrate sediments.Finally,according to the theory of elasticity,the dynamic elastic mechanical parameters under three axial compressions,three particle sizes and three shale contents were calculated to analyze their effects on the dynamic elastic mechanical parameters of hydrate sediments under different conditions.And the following research results were obtained.First,when the hydrate saturation is in a certain range,it is in a proportional relationship with the elastic parameters of sediments.Second,when the hydrate saturation is constant,the dynamic Young's modulus of hydrate sediments increases,but the Poisson's ratio has little to do with the axial compression as particle sizes(0.125-1.180 mm)and axial compression increase and shale content decreases.Third,a model of the relationship between the elastic parameters and the shale content and axial compression is established.In conclusion,the dynamic elastic mechanical indexes of gas hydrate obtained from the acoustic logging methodology will solve the above difficulties and the research results provide a reference for calculating the mechanical properties of hydrate sediments by use of logging data.展开更多
The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to...The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to measure these parameters. The power systems and measurement and control systems of the device are described, as is a successful validation experiment. The results show that this dynamic load direct shearing device can accurately derive dynamic shear parameters within a certain range of frequencies and ampli- tudes of shear load.展开更多
To study the tensile mechanical properties of constant resistance bolts, the RFPA(Rock Failure Process Analysis) statics software is used to perform a uniaxial tensile test on a constant resistance bolt. The numerical...To study the tensile mechanical properties of constant resistance bolts, the RFPA(Rock Failure Process Analysis) statics software is used to perform a uniaxial tensile test on a constant resistance bolt. The numerical test results show that the plastic strain value is 12 times the magnitude of the elastic strain. During plastic deformation, the fluctuation in the stress magnitude is relatively stable, indicating that the bolt has good constant resistance characteristics. The numerical test results are in good agreement with the laboratory test results of M.C. He, and the accuracy and reliability of the numerical test method are verified. Therefore, the RFPA software with coupled static-dynamic loading is further adopted to study the supporting effects of traditional bolts and constant resistance bolts under coupled staticdynamic loading. The numerical comparison of the test results show that the constant resistance bolts can effectively control the deformation amount and rate of the laneway surrounding rock, reduce the total and rate of increase in the accumulated acoustic emissions,decrease the stress on the units in the model and protect the stability of the laneway. This paper verifies that a constant resistance bolt has better impact resistance mechanical properties than those of a traditional bolt and provides an effective way to control rock burst and soft rock that is prone to large deformation damage.展开更多
Under external disturbances,the shear mechanical responses and debonding failure mechanisms at anisotropic interfaces of anchoring system composed of multiphase media are inherently difficult to characterize due to th...Under external disturbances,the shear mechanical responses and debonding failure mechanisms at anisotropic interfaces of anchoring system composed of multiphase media are inherently difficult to characterize due to the concealment nature of interfacial interactions.This study establishes an equivalent shear model for a bolt-resin-rock anchoring system and conducts direct shear tests under dynamic normal load(DNL)boundary from both laboratory experiments and discrete element method(DEM)simulations.The research investigates the influence of normal dynamic load amplitude(An)and rock type on shear strength parameters,elucidating the evolutionary characteristics and underlying mechanisms of shear load and normal displacement fluctuations induced by cyclic normal loading,with maximum shear load decreasing by 36.81%to 46.94%as An increases from 10%to 70%when rock type varies from coal to limestone.Through analysis of strain field evolution,the critical impact of rock type on localization of shear failure surface is revealed,with systematic summarization of differentiated wear characteristics,failure modes,and key controlling factors associated with shear failure surface.Mesoscopic investigations enabled by DEM simulations uncover the nonuniform distribution of contact force chains within the material matrix and across the anisotropic interfaces under various DNL boundaries,clarify rock type dependent crack propagation pathways,and quantitatively assess the damage extent of shear failure surface,with the anisotropic interface damage factor increasing from 34.9%to 56.6%as An rises from 10%to 70%,and decreasing from 49.6%to 23.4%as rock type varies from coal to limestone.展开更多
In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displace...In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displacement hysteretic loops,load carrying capacity,degradation of strength and stiffness,ductility and energy dissipation of the joints were analyzed.The results indicate that comparies with the lintel-column joints,the loading capacity and energy dissipation of the concrete archaized buildings with dual lintel-column joints are higher,and the hysteretic loops is in plump-shape.However,the displacement ductility coefficient is less than that of lintel-column joints.Both of them of the regularity of rigidity degeneration are basically the same.Generally,the joints have the good energy dissipation capacity.And the concrete archaized buildings with lintel-column joints exhibit excellent seismic behavior.展开更多
Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-s...Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-speed dynamic loading conditions. Therefore, it is important to investigate the characteristics and dynamic mechanical behavior of CTB. This paper presents the results of dynamic tests on CTB specimens with different cement and solid contents using a split Hopkinson pressure bar(SHPB). The results showed that some CTB specimens exhibited one to two lower stress peaks after reaching dynamic peak stress before they completely failed. The greater the cement-to-tailings ratio is, the more obvious the strain reaction. This property mainly manifested as follows. First,the dynamic peak stress increased with the increase of the cement-to-tailings ratio when the impact velocity was fixed. Second, the dynamic peak stress had a quadratic relationship with the average stress rate. Third, the cement-to-tailings ratio could enhance the increase rate of dynamic peak stress with strain rate. In addition, the dynamic strength enhancement factor K increased with the increase of strain rate, and its value was larger than that of the rock samples. The failure modes of CTB specimens under low-speed impact were tensile failure and X conjugate shear failure, where were nearly the same as those under static uniaxial and triaxial compression. The CTB specimens were crushed and broken under critical strain, a failure mode similar to that of low-strength concrete. The results of the experimental research can improve the understanding of the dynamic mechanical properties of CTB and guide the strength design of deep mining backfills.展开更多
The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanis...The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanisms were qualitatively categorized and illustrated.This was realized by comparing the formability of fully annealed 2219 aluminum alloy(AA 2219-O)sheet under quasi-static(QS),electromagnetic dynamic(EM),and mechanical dynamic(MD)tensile loadings.It was found that the forming limit of AA 2219-O sheet under EM tensile loading was significantly(45.4%)higher than that under QS tensile loading,and was marginally(3.7%–4.3%)higher than that under MD tensile loading.In addition,the forming limit of AA 2219-O sheet demonstrated a negative dependency on the strain rate within the range of the dynamic tensile tests conducted.The deformation conditions common to EM and MD tensile loadings were responsible for the significant formability improvement compared with QS tensile loading.In particular,the inertial effect was dominant.The different deformation conditions that distinguish EM tensile loading from MD tensile loading resulted in the marginal improvement in formability.This was caused by the absence of a sustaining contact force at the later deformation stage and the lower strain rate.The body force exerted little influence on the formability improvement,and the thermal effect under the two dynamic tensile loadings was negligible.展开更多
A simple experimental method was introduced to study the mechanical properties of reinforced concrete under shock loading. The one-stage light gas gun was used to test the me- chanical properties of reinforced concret...A simple experimental method was introduced to study the mechanical properties of reinforced concrete under shock loading. The one-stage light gas gun was used to test the me- chanical properties of reinforced concrete with different reinforcement ratios under various impact velocities. Three Mn-Cu piezoresistive pressure gauges embedded in the target were used to record the voltage-time signals, from which the stress-strain curves of reinforced concrete were obtained using Lagrangian analysis. Experimental results indicated that the load-bearing capacities of re- inforced concrete increased greatly with the impact velocity and the reinforcement ratio. The peak stress of the shock wave decreased exponentially with the propagation distance.展开更多
With dynamic reliability problems of stochastic parameters,supercavity vehicle is subject to impact loads.The supercavity vehicle is modeled by using eight-node super-parametric shell elements.The tail impact loads of...With dynamic reliability problems of stochastic parameters,supercavity vehicle is subject to impact loads.The supercavity vehicle is modeled by using eight-node super-parametric shell elements.The tail impact loads of supercavity vehicle structures are simplified into two stationary random processes with a certain phase difference,and the random excitations are transformed into sinusoidal ones in terms of the pseudo excitation method.The stress response of stochastic structure can be obtained through combining Newmark method with pseudo excitation perturbation method,and then all required digital features for dynamic reliability of supercavity vehicle have be calculated.The expressions of the mean value and the variance of dynamic reliability of supercavity vehicle with stochastic parameters are educed on the basis of the Poisson formula of calculating dynamic reliability.Finally,the influence of the randomness of structural parameters on the dynamic reliability is analyzed.And the feasibility and availability of this method were validated by comparing with the Monte Carlo method.展开更多
Microstructure evolution and dynamic restoration mechanism of solution-treated Mg-4Y-2Nd-1Sm-0.5Zr alloy have been studied under three TMP parameters consisting of deformation temperatures(350-500℃),strain rates(0.01...Microstructure evolution and dynamic restoration mechanism of solution-treated Mg-4Y-2Nd-1Sm-0.5Zr alloy have been studied under three TMP parameters consisting of deformation temperatures(350-500℃),strain rates(0.01-5 s^(-1)),and strains(0.2,0.4,and 0.8).A strong dynamic softening is observed in all stress-strain curves,even at higher strain rates(1 and 5 s^(-1))due to an adiabatic heating effect.Various stress-strain curves are applied to construct a processing map and develop an Arrhenius-type constitutive equation.With the prediction of the processing map,an optimal processing domain has been determined to be the temperature range 450-500℃and strain rate range 0.01-0.1 s^(-1)at a strain of 0.8.The volume fraction of DRX grains is the largest in the corresponding domain of high temperature and low strain rate.For the effect of TMP parameters on the dynamic restoration,the discontinuous dynamic recrystallization(DDRX)and continuous DRX(CDRX)synergistic effect occur throughout the whole process at high temperature and high strain rate.In terms of high temperature and low strain rate,DDRX characteristics at a low strain and then the DDRX+CDRX synergistic effect is observed at a higher strain.Although the DRX process is weak at low temperature and low strain rate,deformation twins have occurred and provided nucleation sites for DRX grains.展开更多
Twin gold crystal nanowires, whose loading direction is parallel to the twin boundary orientation, are simulated.We calculate the nanowires under tensile or compressive loads, different length nanowires, and different...Twin gold crystal nanowires, whose loading direction is parallel to the twin boundary orientation, are simulated.We calculate the nanowires under tensile or compressive loads, different length nanowires, and different twin boundary nanowires respectively. The Young modulus of nanowires under compressive load is about twice that under tensile load.The compressive properties of twin gold nanowires are superior to their tensile properties. For different length nanowires,there is a critical value of length with respect to the mechanical properties. When the length of nanowire is greater than the critical value, its mechanical properties are sensitive to length. The twin boundary spacing hardly affects the mechanical properties.展开更多
Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method ...Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method of the affected zone theory, and the deterioration laws of mechanics parameters of unloading rock mass, the continuous mining process in underground mine was analyzed by the software MIDAS/GTS, the mechanical response of roof rock mass unloading was studied, and the differences were analyzed with the conventional simulation. The result shows that the maximum tensile stress, subsidence displacement and equivalent plastic strain of roof rock mass are 1.5 MPa, 20 cm and 1.5% in the unloading analysis, while 1.0 MPa, 13 cm and 0.9% in the conventional analysis. The values of unloading analysis, which are also closer to the actual situation, are greater than those of conventional analysis; the maximum step in continuous mining is 48 m, which shows that the induced treatment of the roof should be carried out after 2 mining steps展开更多
In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads...In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.展开更多
To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magne...To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magnet Synchronous Motors(PMSMs),is developed.However,on account of the heavy forming load,the PMSM parameters are in great variation.Meanwhile,the PMSM is always in a transient state caused by fast time-varying forming load,resulting in low identification precision of varied PMSM parameters and control precision of PMSM under traditional parameter identification methods.To solve this problem,a novel Sliding Mode Control Method with Enhanced PMSM Parameter Identification(SMCMEPPI)for heavy load MEFP is proposed.Firstly,the kinematic model of MEFP is established.Secondly,the variation law of PMSM parameters under heavy load is revealed.Thirdly,an enhanced PMSM parameter identification method is proposed,in which the q axis current of PMSM is used to represent the changing rate of forming load and the adjustment factor is first proposed to remove improper input of PMSM parameter identification online.Fourthly,the Electromechanical Coupling Dynamic Model(ECDM)of MEFP,which includes identified PMSM parameters,is developed.Finally,based on the developed ECDM,a novel SMCMEPPI is proposed to realize the high-precision control of heavy load MEFP.The experimental results indicate that the proposed SMCMEPPI can significantly improve the control precision of heavy load MEFP.展开更多
基金Project(51874281)supported by the National Natural Science Foundation of ChinaProject(2024M752698)supported by China Postdoctoral Science FoundationProject(2025WLKXJ041)supported by the Graduate Innovation Program of China University of Mining and Technology。
文摘Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CRC)under the influence of dynamic load parameters were studied.The main results are as follows:1)Dynamic load increases the rheological properties and damage fracture development of CRC.With the increase of the amplitude and frequency of the dynamic load,the number of dynamic load cycles required for the failure of the CRC decreases,the irreversible strain increases,and the failure of sample accelerates;2)The AE positioning events during the loading process of the specimen decrease with the increase of the dynamic load amplitude,and increase with the increase of the dynamic load frequency;3)The fractal dimension,total energy and cumulative elastic energy of the broken particles of the CRC increase with the increase of the amplitude and frequency of the dynamic load.The fractal dimension corresponding to the increase of the dynamic load frequency is larger,and the energy and cumulative elastic energy corresponding to the increase of the dynamic load amplitude are larger.
基金supported by the National Natural Science Foundation of China(Nos.52374100,52525401,and 52304150)Outstanding Young Talent Project of Shanxi Province(No.SJYC2024301)Research Project Supported by Shanxi Scholarship Council of China(No.2023-041).
文摘Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failure of roadway support,thus threatening the safety of the roadway.In this paper,the variable angle shear test of drilled specimens under the action of static and dynamic loads is used to study the evolution of mechanical parameters of the specimens and their influence on the plastic zone of the sur-rounding rock.The shear strength decreases linearly with the increase of drilling diameter.With the increase of pre-static load level and dynamic load amplitude,the cohesion first increases and then decreases,and the internal friction angle decreases.Moreover,the shear failure surface changes from rough to smooth.The reasons include that the static load enhances the tooth cutting effect and the repeated friction of cracks caused by the dynamic load.Borehole pressure relief leads to an increase in the radius of the plastic zone of the surrounding rock following a quadratic function.The research results of this paper provide a theoretical basis for designing drilling unloading parameters and supporting parameters for rock burst roadways.
基金supported by the National Natural Science Foundation of China(Nos.52204136,52474100,and 52204092).
文摘Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.
基金the financial support from the China Postdoctoral Science Foundation(Nos.2022M713384,and 2022M721450)the National Natural Science Foundation of China(Nos.52174187,51704164,and 52130409)the Technology Innovation Fund of China Coal Research Institute(No.2020CX-I-07).
文摘Coal and gas outbursts are dynamic disasters in which a large mass of gas and coal suddenly emerges in a mining space within a split second.The interaction between the gas pressure and stress environment is one of the key factors that induce coal and gas outbursts.In this study,first,the coupling relationship between the gas pressure in the coal body ahead of the working face and the dynamic load was investigated using experimental observations,numerical simulations,and mine-site investigations.It was observed that the impact rate of the dynamic load on the gas-bearing coal can significantly change the gas pressure.The faster the impact rate,the speedier the increase in gas pressure.Moreover,the gas pressure rise was faster closer to the impact interface.Subsequently,based on engineering background,we proposed three models of stress and gas pressure distribution in the coal body ahead of the working face:static load,stress disturbance,and dynamic load conditions.Finally,the gas pressure distribution and outburst mechanism were investigated.The high concentration of gas pressure appearing at the coal body ahead of the working face was caused by the dynamic load.The gas pressure first increased gradually to a peak value and then decreased with increasing distance from the working face.The increase in gas pressure plays a major role in outburst initiation by resulting in the ability to more easily reach the critical points needed for outburst initiation.Moreover,the stronger the dynamic load,the greater the outburst initiation risk.The results of this study provide practical guidance for the early warning and prevention of coal and gas outbursts.
基金China National Nature Science Foundation(Grant No.11872119)Foundation Strengthening Project(Grant No.2020-JCJQ-ZD-220)for supporting this project。
文摘The study of high-energy and low-vulnerability propellants is important for the power performance and safety of solid propellant rocket motors.The modified split Hopkinson pressure bar(SHPB)tests are performed on two kinds of propellant with different crosslinking density to study the dynamic mechanical responses and damage-ignition mechanism.SHPB apparatus is equipped with a highperformance infrared camera and high-speed camera to capture the deformation,damage-ignition feature and temperature evolution images in the impact process.The results suggested that the mechanical responses and damage-ignition mechanism of the propellants were affected by the strain rates and crosslinking density.The damage-ignition degree is more intense and the reaction occurs earlier with the increase of strain rates.For propellant 1 with higher crosslinking density,the critical ignition strain rate is 4500 s^(-1).Two kinds of propellants show different ignition mechanism,i.e.crack generation,propagation and final fracture for propellant 1 while viscous shear flow for propellant 2.Meanwhile,the SEM images also reveal the difference of damage-ignition mechanism of the two kinds of propellants.Finally,the ignition mechanism under different strain rates and critical ignition strain rate of propellants are further explained by the theoretical calculation of temperature variations.
基金jointly supported by the State Key Research Development Program of China (Grant No.2016YFC0600706)the National Natural Science Foundation of China (Grant Nos.41630642 and 11472311)
文摘Rock failure phenomena,such as rockburst,slabbing(or spalling) and zonal disintegration,related to deep underground excavation of hard rocks are frequently reported and pose a great threat to deep mining.Currently,the explanation for these failure phenomena using existing dynamic or static rock mechanics theory is not straightforward.In this study,new theory and testing method for deep underground rock mass under coupled static-dynamic loading are introduced.Two types of coupled loading modes,i.e.'critical static stress + slight disturbance' and 'elastic static stress + impact disturbance',are proposed,and associated test devices are developed.Rockburst phenomena of hard rocks under coupled static-dynamic loading are successfully reproduced in the laboratory,and the rockburst mechanism and related criteria are demonstrated.The results of true triaxial unloading compression tests on granite and red sandstone indicate that the unloading can induce slabbing when the confining pressure exceeds a certain threshold,and the slabbing failure strength is lower than the shear failure strength according to the conventional Mohr-Column criterion.Numerical results indicate that the rock unloading failure response under different in situ stresses and unloading rates can be characterized by an equivalent strain energy density.In addition,we present a new microseismic source location method without premeasuring the sound wave velocity in rock mass,which can efficiently and accurately locate the rock failure in hard rock mines.Also,a new idea for deep hard rock mining using a non-explosive continuous mining method is briefly introduced.
基金supported by the National Key R&D Program of China“New technology for solid fluidization testing of marine gas hydrate”(No.:2016YFC0304008).
文摘Gas hydrate(hereinafter,"hydrate"for short)in the marine environment mostly lies in weakly consolidated sediments,so its undisturbed coring is difficult and costly.In view of this,it is necessary to understand the relationship between acoustic properties and elastic mechanical properties of hydrates through laboratory experiments.In this paper,samples of hydrate sediments were prepared indoors.Then,petrophysical experiments were carried out on these samples to measure the electric parameters and acoustic parameters of hydrate sediments.Finally,according to the theory of elasticity,the dynamic elastic mechanical parameters under three axial compressions,three particle sizes and three shale contents were calculated to analyze their effects on the dynamic elastic mechanical parameters of hydrate sediments under different conditions.And the following research results were obtained.First,when the hydrate saturation is in a certain range,it is in a proportional relationship with the elastic parameters of sediments.Second,when the hydrate saturation is constant,the dynamic Young's modulus of hydrate sediments increases,but the Poisson's ratio has little to do with the axial compression as particle sizes(0.125-1.180 mm)and axial compression increase and shale content decreases.Third,a model of the relationship between the elastic parameters and the shale content and axial compression is established.In conclusion,the dynamic elastic mechanical indexes of gas hydrate obtained from the acoustic logging methodology will solve the above difficulties and the research results provide a reference for calculating the mechanical properties of hydrate sediments by use of logging data.
基金the support provided by the National 973 Project of China (No. 2012CB026104)the National Science Foundation of China (NSFC) (No. 41171064)the Fundamental Research Funds for the Central Universities (No. 2011JBZ009)
文摘The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to measure these parameters. The power systems and measurement and control systems of the device are described, as is a successful validation experiment. The results show that this dynamic load direct shearing device can accurately derive dynamic shear parameters within a certain range of frequencies and ampli- tudes of shear load.
基金supported by the Chinese National Natural Science Foundation (Nos. 51627804, 41572249)the State Key Laboratory for GeoMechanics and Deep Underground Engineering, China University of Mining & Technology (No. SKLGDUEK1825)
文摘To study the tensile mechanical properties of constant resistance bolts, the RFPA(Rock Failure Process Analysis) statics software is used to perform a uniaxial tensile test on a constant resistance bolt. The numerical test results show that the plastic strain value is 12 times the magnitude of the elastic strain. During plastic deformation, the fluctuation in the stress magnitude is relatively stable, indicating that the bolt has good constant resistance characteristics. The numerical test results are in good agreement with the laboratory test results of M.C. He, and the accuracy and reliability of the numerical test method are verified. Therefore, the RFPA software with coupled static-dynamic loading is further adopted to study the supporting effects of traditional bolts and constant resistance bolts under coupled staticdynamic loading. The numerical comparison of the test results show that the constant resistance bolts can effectively control the deformation amount and rate of the laneway surrounding rock, reduce the total and rate of increase in the accumulated acoustic emissions,decrease the stress on the units in the model and protect the stability of the laneway. This paper verifies that a constant resistance bolt has better impact resistance mechanical properties than those of a traditional bolt and provides an effective way to control rock burst and soft rock that is prone to large deformation damage.
基金support from the National Natural Science Foundation of China(Nos.51504247,52174092,51904290,and 52074259)the Natural Science Foundation of Jiangsu Province,China(No.BK20220157)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)the China University of Mining and Technology(CUMT)Open Sharing Fund for Large-scale Instruments and Equipment(No.DYGX-2025-47)is gratefully acknowledged.
文摘Under external disturbances,the shear mechanical responses and debonding failure mechanisms at anisotropic interfaces of anchoring system composed of multiphase media are inherently difficult to characterize due to the concealment nature of interfacial interactions.This study establishes an equivalent shear model for a bolt-resin-rock anchoring system and conducts direct shear tests under dynamic normal load(DNL)boundary from both laboratory experiments and discrete element method(DEM)simulations.The research investigates the influence of normal dynamic load amplitude(An)and rock type on shear strength parameters,elucidating the evolutionary characteristics and underlying mechanisms of shear load and normal displacement fluctuations induced by cyclic normal loading,with maximum shear load decreasing by 36.81%to 46.94%as An increases from 10%to 70%when rock type varies from coal to limestone.Through analysis of strain field evolution,the critical impact of rock type on localization of shear failure surface is revealed,with systematic summarization of differentiated wear characteristics,failure modes,and key controlling factors associated with shear failure surface.Mesoscopic investigations enabled by DEM simulations uncover the nonuniform distribution of contact force chains within the material matrix and across the anisotropic interfaces under various DNL boundaries,clarify rock type dependent crack propagation pathways,and quantitatively assess the damage extent of shear failure surface,with the anisotropic interface damage factor increasing from 34.9%to 56.6%as An rises from 10%to 70%,and decreasing from 49.6%to 23.4%as rock type varies from coal to limestone.
基金supported by Crosswise Tasks of Enterprise Entrusted(JG-ZH-A-202411-003)High-level Talents Program of Hainan Basic and Applied Basic Research Program of China(520RC543)。
文摘In order to research the concrete archaized buildings with lintel-column joint,2 specimens were tested under dynamic experiment.The failure characteristics,skeleton curves,mechanical behavior such as the load-displacement hysteretic loops,load carrying capacity,degradation of strength and stiffness,ductility and energy dissipation of the joints were analyzed.The results indicate that comparies with the lintel-column joints,the loading capacity and energy dissipation of the concrete archaized buildings with dual lintel-column joints are higher,and the hysteretic loops is in plump-shape.However,the displacement ductility coefficient is less than that of lintel-column joints.Both of them of the regularity of rigidity degeneration are basically the same.Generally,the joints have the good energy dissipation capacity.And the concrete archaized buildings with lintel-column joints exhibit excellent seismic behavior.
基金financially supported by the National Key R&D Program of China (No. 2018YFC0604602)the Fundamental Research Funds for the Central Universities of China (No. FRF-TP-17-029A2)the Open fund of Key Laboratory of High-Efficient Mining and Safety of Metal Mines, Ministry of Education of China (No. ustbmslab201803)
文摘Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-speed dynamic loading conditions. Therefore, it is important to investigate the characteristics and dynamic mechanical behavior of CTB. This paper presents the results of dynamic tests on CTB specimens with different cement and solid contents using a split Hopkinson pressure bar(SHPB). The results showed that some CTB specimens exhibited one to two lower stress peaks after reaching dynamic peak stress before they completely failed. The greater the cement-to-tailings ratio is, the more obvious the strain reaction. This property mainly manifested as follows. First,the dynamic peak stress increased with the increase of the cement-to-tailings ratio when the impact velocity was fixed. Second, the dynamic peak stress had a quadratic relationship with the average stress rate. Third, the cement-to-tailings ratio could enhance the increase rate of dynamic peak stress with strain rate. In addition, the dynamic strength enhancement factor K increased with the increase of strain rate, and its value was larger than that of the rock samples. The failure modes of CTB specimens under low-speed impact were tensile failure and X conjugate shear failure, where were nearly the same as those under static uniaxial and triaxial compression. The CTB specimens were crushed and broken under critical strain, a failure mode similar to that of low-strength concrete. The results of the experimental research can improve the understanding of the dynamic mechanical properties of CTB and guide the strength design of deep mining backfills.
基金financially supported by the National Natural Science Foundation of China(Nos.51575206 and 51705169)the Innovation Funds for Aerospace Science and Technology from China Aerospace Science and Technology Corporation(No.CASC150704)+1 种基金the Science Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body(No.31615006)the Fundamental Research Funds for the Central University(No.2016YXZD055)。
文摘The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanisms were qualitatively categorized and illustrated.This was realized by comparing the formability of fully annealed 2219 aluminum alloy(AA 2219-O)sheet under quasi-static(QS),electromagnetic dynamic(EM),and mechanical dynamic(MD)tensile loadings.It was found that the forming limit of AA 2219-O sheet under EM tensile loading was significantly(45.4%)higher than that under QS tensile loading,and was marginally(3.7%–4.3%)higher than that under MD tensile loading.In addition,the forming limit of AA 2219-O sheet demonstrated a negative dependency on the strain rate within the range of the dynamic tensile tests conducted.The deformation conditions common to EM and MD tensile loadings were responsible for the significant formability improvement compared with QS tensile loading.In particular,the inertial effect was dominant.The different deformation conditions that distinguish EM tensile loading from MD tensile loading resulted in the marginal improvement in formability.This was caused by the absence of a sustaining contact force at the later deformation stage and the lower strain rate.The body force exerted little influence on the formability improvement,and the thermal effect under the two dynamic tensile loadings was negligible.
基金Project supported by the National Natural Science Foundation of China(Nos.51368048 and 11162015)
文摘A simple experimental method was introduced to study the mechanical properties of reinforced concrete under shock loading. The one-stage light gas gun was used to test the me- chanical properties of reinforced concrete with different reinforcement ratios under various impact velocities. Three Mn-Cu piezoresistive pressure gauges embedded in the target were used to record the voltage-time signals, from which the stress-strain curves of reinforced concrete were obtained using Lagrangian analysis. Experimental results indicated that the load-bearing capacities of re- inforced concrete increased greatly with the impact velocity and the reinforcement ratio. The peak stress of the shock wave decreased exponentially with the propagation distance.
文摘With dynamic reliability problems of stochastic parameters,supercavity vehicle is subject to impact loads.The supercavity vehicle is modeled by using eight-node super-parametric shell elements.The tail impact loads of supercavity vehicle structures are simplified into two stationary random processes with a certain phase difference,and the random excitations are transformed into sinusoidal ones in terms of the pseudo excitation method.The stress response of stochastic structure can be obtained through combining Newmark method with pseudo excitation perturbation method,and then all required digital features for dynamic reliability of supercavity vehicle have be calculated.The expressions of the mean value and the variance of dynamic reliability of supercavity vehicle with stochastic parameters are educed on the basis of the Poisson formula of calculating dynamic reliability.Finally,the influence of the randomness of structural parameters on the dynamic reliability is analyzed.And the feasibility and availability of this method were validated by comparing with the Monte Carlo method.
基金financially supported by the National Natural Science Foundation of China(No.51571084)financial support from the China Scholarship Council(No.201908410208)。
文摘Microstructure evolution and dynamic restoration mechanism of solution-treated Mg-4Y-2Nd-1Sm-0.5Zr alloy have been studied under three TMP parameters consisting of deformation temperatures(350-500℃),strain rates(0.01-5 s^(-1)),and strains(0.2,0.4,and 0.8).A strong dynamic softening is observed in all stress-strain curves,even at higher strain rates(1 and 5 s^(-1))due to an adiabatic heating effect.Various stress-strain curves are applied to construct a processing map and develop an Arrhenius-type constitutive equation.With the prediction of the processing map,an optimal processing domain has been determined to be the temperature range 450-500℃and strain rate range 0.01-0.1 s^(-1)at a strain of 0.8.The volume fraction of DRX grains is the largest in the corresponding domain of high temperature and low strain rate.For the effect of TMP parameters on the dynamic restoration,the discontinuous dynamic recrystallization(DDRX)and continuous DRX(CDRX)synergistic effect occur throughout the whole process at high temperature and high strain rate.In terms of high temperature and low strain rate,DDRX characteristics at a low strain and then the DDRX+CDRX synergistic effect is observed at a higher strain.Although the DRX process is weak at low temperature and low strain rate,deformation twins have occurred and provided nucleation sites for DRX grains.
基金supported by the National Science and Technology Pillar Program,China(Grant No.2015BAK17B06)the Earthquake Industry Special Science Research Foundation Project,China(Grant No.201508026-02)+1 种基金the Natural Science Foundation of Heilongjiang Province,China(Grant No.A201310)the Scientific Research Starting Foundation for Post Doctorate of Heilongjiang Province,China(Grant No.LBHQ13040)
文摘Twin gold crystal nanowires, whose loading direction is parallel to the twin boundary orientation, are simulated.We calculate the nanowires under tensile or compressive loads, different length nanowires, and different twin boundary nanowires respectively. The Young modulus of nanowires under compressive load is about twice that under tensile load.The compressive properties of twin gold nanowires are superior to their tensile properties. For different length nanowires,there is a critical value of length with respect to the mechanical properties. When the length of nanowire is greater than the critical value, its mechanical properties are sensitive to length. The twin boundary spacing hardly affects the mechanical properties.
基金Projects (50934006, 51074178) supported by the National Natural Science Foundation of ChinaProject (2010QZZD001) supported by the Fundamental Research Funds for the Central Universities of China
文摘Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method of the affected zone theory, and the deterioration laws of mechanics parameters of unloading rock mass, the continuous mining process in underground mine was analyzed by the software MIDAS/GTS, the mechanical response of roof rock mass unloading was studied, and the differences were analyzed with the conventional simulation. The result shows that the maximum tensile stress, subsidence displacement and equivalent plastic strain of roof rock mass are 1.5 MPa, 20 cm and 1.5% in the unloading analysis, while 1.0 MPa, 13 cm and 0.9% in the conventional analysis. The values of unloading analysis, which are also closer to the actual situation, are greater than those of conventional analysis; the maximum step in continuous mining is 48 m, which shows that the induced treatment of the roof should be carried out after 2 mining steps
基金funding support from the National Natural Science Foundation of China(Grant Nos.52174092 and 51904290)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220157).
文摘In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.
基金the National Science and Technology Major Project of China(No.2019-Ⅶ-0017-0158)the National Natural Science Foundation of China(Nos.U2037204,U21A20131)the Innovative Research Team Development Program of Ministry of Education of China(No.IRT17R83)for the support given to this research。
文摘To achieve the manufacturing of Thin-Wall and High-Rib Components(TWHRC)with high precision,a novel heavy load Multi-DOF Envelope Forming Press(MEFP)with Parallel Kinematic Mechanism(PKM),driven by six Permanent Magnet Synchronous Motors(PMSMs),is developed.However,on account of the heavy forming load,the PMSM parameters are in great variation.Meanwhile,the PMSM is always in a transient state caused by fast time-varying forming load,resulting in low identification precision of varied PMSM parameters and control precision of PMSM under traditional parameter identification methods.To solve this problem,a novel Sliding Mode Control Method with Enhanced PMSM Parameter Identification(SMCMEPPI)for heavy load MEFP is proposed.Firstly,the kinematic model of MEFP is established.Secondly,the variation law of PMSM parameters under heavy load is revealed.Thirdly,an enhanced PMSM parameter identification method is proposed,in which the q axis current of PMSM is used to represent the changing rate of forming load and the adjustment factor is first proposed to remove improper input of PMSM parameter identification online.Fourthly,the Electromechanical Coupling Dynamic Model(ECDM)of MEFP,which includes identified PMSM parameters,is developed.Finally,based on the developed ECDM,a novel SMCMEPPI is proposed to realize the high-precision control of heavy load MEFP.The experimental results indicate that the proposed SMCMEPPI can significantly improve the control precision of heavy load MEFP.
