Objective:This study aims to clarify how the stimulation of acupuncture points is achieved by needles with different surface texture during acupuncture;it also seeks to lessen injury at the insertion site and increase...Objective:This study aims to clarify how the stimulation of acupuncture points is achieved by needles with different surface texture during acupuncture;it also seeks to lessen injury at the insertion site and increase the therapeutic efficacy of acupuncture,by simulating the mechanical effects of various needle surface patterns on Zusanli(ST36)without changing the radius of acupuncture needles.Methods:Five acupuncture needle models with different surface patterns,including the smooth needle,the lined needle,the ringed needle,the left-hand threaded needle and the right-hand threaded needle,and a layered model of the Zusanli acupoint were used to investigate how to reduce tissue damage and increase stimulation during acupuncture treatment,Puncturing of the skin as well as liftinginserting and twisting needle manipulations were simulated using these models,and the degree of damage and force of stimulation caused by the acupuncture needles with different surface patterns during acupuncturewerecompared.Results:The smooth needle and the lined needle caused the least tissue damage during insertion,while the left-hand threaded and the right-hand threaded needles caused the most damage.The ringed needle,the left-hand threaded needle and the right-hand threaded needle stimulated the acupoint tissue more during lifting-inserting manipulations,while the lined needle and the smooth needle produced less stimulation.The stimulation of the lined needle on the acupoint tissue was the largest during twisting manipulation,whereas the left-hand threaded needle and the right-hand threaded needle had smaller effects.In lifting-inserting and twisting manipulations,both the left-hand threaded needle and right-hand threaded needle provided more stimulation,but the torsion direction in which they produced better stimulation was theopposite.Conclusion:According to the simulation results,the ringed pattern enhances stimulation best in the lifting-inserting manipulation,whereas the lined pattern enhances stimulation best in the twisting manipulation.Both the right-hand and left-hand thread patterns have certain enhancing effects in these two operations.Taking the geometric properties of the pattern into account,the left-hand thread pattern and the right-hand thread pattern have the geometric characteristics of both the lined pattern and the ringed pattern.To conclude,a pattern perpendicular to the movement direction during the acupuncture manipulation creates more stimulation.These results have significance for future needle design.展开更多
A theoretical study is carried out for the modification and implication of the effect on the type three level atom in a high-finesse optical cavity driven by light field including spontaneous emission and the cavity d...A theoretical study is carried out for the modification and implication of the effect on the type three level atom in a high-finesse optical cavity driven by light field including spontaneous emission and the cavity decay. Analytic expressions for the dipole force, the friction force, the optical potentials and the friction coefficient are obtained. Then the numerical and graphical methods are used to investigate the friction coefficient with the controlling parameters. It is shown that the friction coefficient is strongly dependent on the controlling parameters. The cooling rate can increase by one order of magnitude more than that of a two-level atomic system. The reason can be given using the dressed states and the Sisyphus cooling mechanism, which would stimulate further experimental investigations.展开更多
The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclea...The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.展开更多
Grease is extensively used in rolling bearings due to its inherent sealing properties.However,mechanical degradation typically occurs,resulting in a significantly shorter lifespan for the grease compared to the bearin...Grease is extensively used in rolling bearings due to its inherent sealing properties.However,mechanical degradation typically occurs,resulting in a significantly shorter lifespan for the grease compared to the bearing.Investigating aging mechanisms is essential.This study utilized rolling bearings to obtain mechanically aged greases.The aged samples were then subjected to do rheological test,FTIR test and friction test to examine the effects of aging time,radial load,and rotational speed.An innovative disk-ball-disk device was developed to study the friction characteristics of aged grease in rolling bearings.Additionally,a grease lubrication and friction model were proposed to further evaluate the lubrication performance of aged grease,using measured rheological parameters and the kinematic velocities of the disk-ball-disk device as inputs.The calculated friction coefficients matched well with disk-ball-disk experimental results.FTIR analysis revealed that the non-soap thickener’s structure remained stable,but additives depleted at high speeds.The structure of lithium soap thickener decomposed severely,leading to oil bleeding and a shortened replenishment duration.Over aging time,both greases had lower friction and viscosity due to gradual thickener breakdown,releasing bled oil and extending replenishment.Radial load minimally affected the properties of aged grease.This study may provide valuable insights into the aging mechanisms of grease and the enhancement of rolling bearing lubrication.展开更多
This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to externa...This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.展开更多
The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was ...The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was eliminated because of the formation of Al2O3 particles. It was shown that Al and SiO2 reacted at 860℃. During the reaction, A1 atoms were mainly transferred to Al2O3 particles, and to some extent, diffused into MoSi2 grains. Both the toughness and strength of Al containing composites exceeded those of pure MoSi2 material. Bending strength and fracture toughness reach the highest value of 350 MPa, 4.05 MPa.m1/2, respectively, at ambient temperature when Al addition was of 3.5 wt pct.展开更多
Structural, electronic and mechanical properties of the nH-SiC （n = 2, 4, 6, 8 and 10） polytypes are calculated by using the first-principles calculations based on the density-functional theory approach. The optimiz...Structural, electronic and mechanical properties of the nH-SiC （n = 2, 4, 6, 8 and 10） polytypes are calculated by using the first-principles calculations based on the density-functional theory approach. The optimized lattice parameters of nH-SiC are in good agreement with the experimental data. The mechanical properties, including elastic constants, bulk modulus, Young＇s modulus, shear modulus and Poisson＇s ratio, are calculated. The analysis of elastic properties indicates that the effects of n on the mechanical properties of the five nil-SiC structures have no difference. The indirect band gap relationship for the live polytypes is Ebg2H 〉 Ebg4H 〉 Ebg6H 〉 Ebg10H 〉 EbgsH.展开更多
As the channel length of metal-oxide-semiconductor field-effect transistors （MOSFETs） scales into the nanometer regime, quantum mechanical effects are becoming more and more significant. In this work, a model for th...As the channel length of metal-oxide-semiconductor field-effect transistors （MOSFETs） scales into the nanometer regime, quantum mechanical effects are becoming more and more significant. In this work, a model for the surrounding-gate （SG） nMOSFET is developed. The SchrSdinger equation is solved analytically. Some of the solutions are verified via results obtained from simulations. It is found that the percentage of the electrons with lighter conductivity mass increases as the silicon body radius decreases, or as the gate voltage reduces, or as the temperature decreases. The eentroid of inversion-layer is driven away from the silicon-oxide interface towards the silicon body, therefore the carriers will suffer less scattering from the interface and the electrons effective mobility of the SG nMOSFETs will be enhanced.展开更多
A simple analytical model has been developed to study quantum mechanical effects （QME） in a germanium substrate MOSFET （metal oxide semiconductor field effect transistor）, which includes gate oxide tunneling consi...A simple analytical model has been developed to study quantum mechanical effects （QME） in a germanium substrate MOSFET （metal oxide semiconductor field effect transistor）, which includes gate oxide tunneling considering the energy quantization effects in the substrate. Some alternate high dielectric constant materials to reduce the tunneling have also been studied. By comparing with the numerically reported results, the results match well with the existing reported work.展开更多
The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumpti...The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.展开更多
The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ...The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06μm wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from 2.8 × 10^ 3 to 1.01 × 10^5pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.展开更多
The rapid development of high-speed rail（HSR） is influencing regional development, regional structure, commuting, and regional integration. East Asia is the region with the world＇s first and largest current operati...The rapid development of high-speed rail（HSR） is influencing regional development, regional structure, commuting, and regional integration. East Asia is the region with the world＇s first and largest current operating and planned HSR network. In this paper, we examine the evolutionary mechanism and impacts on the transport circle and accessibility of HSR in East Asia. The results indicate that the HSR network first follows a ＂core-core＂ model and then forms a corridor in Japan, South Korea, and China Taiwan, but then forms a complete network in China Mainland. The current operating HSR lines are mostly distributed in regions with developed economies and dense populations, and more than half of the population and GDP in China can be served by HSR within 1 hour＇s travel time. The planned HSR network will expand to the western region of China and Japan and the southern region of South Korea. The development of the current operating and planned HSR network considerably enlarges the transport circle of core cities, especially cities along trunk HSR lines. This 1 h transport circle of core cities has formed continuous regions in the Yangtze River Delta, the Pearl River Delta, Tokyo, Seoul, and along trunk HSR lines. The HSR network will bring about substantial improvement in accessiblity, but also increase the inequality of nodal accessibility in China Mainland. Spatially, the spatial patterns of the weighted shortest travel time of cities in China Mainland, Japan, and South Korea all present the ＂core-peripheral structure＂, taking Zhengzhou, Tokyo, and Seoul, respectively, as core cities, and cities located along the trunk HSR lines gain large improvement in accessibility.展开更多
BACKGROUND: Signal regulatory protein alpha1 (Sirpα1) is a negative regulatory factor, and inhibits receptor tyro- sine kinase-dependent cell proliferating signal. This study was undertaken to observe the effect of s...BACKGROUND: Signal regulatory protein alpha1 (Sirpα1) is a negative regulatory factor, and inhibits receptor tyro- sine kinase-dependent cell proliferating signal. This study was undertaken to observe the effect of signal regulatory proteinα1 ( Sirpα1) on gankyrin, cyclin D1, CDK4 and Fas expression in Sk-hep1 mouse hepatoma carcinoma cell line. METHODS: BOSC 23 packed cells were respectively trans- fected by means of recombinated retrovirus including pLX- SN, pLXSN-Sirpα1 and pLXSN-Sirpα1Δ4Y2 with lipofec- tin, and various plasmid virus media (viral titer 2.1 × 106 CFU/ml) were collected and infected respectively in 80% confluent Sk-hepl cells. Transfected Sk-hep1 cells were se- lectively screened with G418 (1200 μg/ml), and Sk-hep1 cell lines transfected with various plasmids were obtained. The protein expressions of gankyrin, cyclin D1, CDK4 and Fas in various Sk-hep1 lines were determined by Western blotting. Various Sk-hep1 lines were recovered to culture with 10% fetal bovine serum at 12 hours and 24 hours after starving culture with free serum for 72 hours, and cells were collected to determine the percentage of S phase cells of proliferating cycle by flow cytometry. RESULTS: Sirpα1 transfection remarkably downregulated gankyrin and cyclin D1 expression. Sirpα1Δ4Y2 downregu- lation of gankyrin expression was greater than that of Sirpα1(P <0.05), but no significant effect of Sirpα1 and Sirpα1Δ4Y2 on CDK4 and Fas protein expression was ob- served in transfected Sk-hep1 lines (P >0.05). The per- centage of S phase cells significantly decreased in Sk-hep1 cells transfected with Sirpα1 and Sirpα1Δ4Y2 plasmids (vs pLXSN Sk-hep1, P <0.05). The percentage of S phase cells in various Sk-hep1 cells increased when recovering to culture with 10% fetal bovine serum at 12 hours, but the percentage of S phase cells in Sk-hep1 cells transfected with Sirpα1 was the lowest ( vs pLXSN and Sirpα1Δ4Y2 Sk- hepl, P<0.05). The percentage of S phase cells in trans- fected pLSXN Sk-hep1 cells was the largest (vs Sirpα1 and Sirpα1Δ4Y2 Sk-hepl, P <0. 05). There was no significant difference between the transfected Sirpα1 Sk-hepl cells and Sirpα1Δ4Y2 Sk-hep1 cells (P>0.05). CONCLUSIONS: Sirpα1 decreases gankyrin and cyclin D1 expression, and inhibits proliferation of liver carcinoma cells. It may be one of the forms for an Sirpα1 negative regulation of carcinogenesis and development of hepatocel- lular carcinoma.展开更多
The effect of lamellar orientation on the deformation behavior of eutectic high entropy alloy at the micrometer scale,and the roles of two rarely explored laminate orientations(i.e.,the lamellar orientation at~0°...The effect of lamellar orientation on the deformation behavior of eutectic high entropy alloy at the micrometer scale,and the roles of two rarely explored laminate orientations(i.e.,the lamellar orientation at~0°and 45°angles with the loading direction)in regulating size-dependent plasticity were investigated using in-situ micropillar compression tests.The alloy,CoCrFe NiTa_(0.395),consists of alternating layers of Laves and FCC phases.It was found that the yield stress of the 0°pillars scaled inversely with the pillar diameters,in which the underlying deformation mode was observed to transform from pillar kinking or buckling to shear banding as the diameter decreased.In the case of the 450 pillars with diameters ranging from 0.4 to 3μm,there exists a’weakest’diameter of~1μm,at which both constraint effect and dislocation starvation are ineffective.Irrespective of the lamellar orientations,the strain hardening rate decreased with decreasing pillar diameter due to the diminishing dislocation accumulation that originated from the softening nature of large shear bands in the 0°pillars,and the enhanced probability of dislocation annihilation at the increased free surfaces in the 45°pillars.The findings expand and deepen the understanding of the mechanical size effect in small-scale crystalline materials and,in so doing,provide a critical dimension for the development of high-performing materials used for nanoor microelectromechanical systems.展开更多
The effect of excitation current intensity on the mechanical properties of ZL205 A castings solidified under a traveling magnetic field was studied. The results of the experiment indicate that the excitation current i...The effect of excitation current intensity on the mechanical properties of ZL205 A castings solidified under a traveling magnetic field was studied. The results of the experiment indicate that the excitation current intensity of the traveling magnetic field has a great influence on the mechanical properties of the ZL205 A castings. When the excitation current intensity is 15 A, the tensile strength and elongation of ZL205 A alloy castings increase 27.2% and 67.7%, respectively, compared with those of the same alloy solidified under gravity. The improvement of mechanical properties is attributed to the decrease of micro-porosity in the alloy. Under the traveling magnetic field, the feeding pressure in the alloy melt before solidification can be enhanced due to the electromagnetic force. Moreover, the melt flow induced by the traveling magnetic field can decrease the temperature gradient. The feeding resistance will be increased because the temperature gradient decrease. So traveling magnetic field has an optimum effect on feeding.展开更多
Ultrahigh-molecular-weight polyethylene(UtlMWPE) has been irradiated (0-40 Mrad) with a Co^(60) source at room temperature under vacuum. Their crystallinity has been investigated by DSC and SAXS A significant increase...Ultrahigh-molecular-weight polyethylene(UtlMWPE) has been irradiated (0-40 Mrad) with a Co^(60) source at room temperature under vacuum. Their crystallinity has been investigated by DSC and SAXS A significant increase of heat of fusion can be seen at low irradiation doses, which is attributed to crystallization caused by chain scission during the process of irradiation. It is also observed that thickness of lamellae changes with irradiation dose. Young's modulus has been improved significantly after irradiation at low doses.展开更多
The microstructures and mechanical properties of ferrite-based lightweight steel with different compositions were investigated by tensile test,scanning electron microscopy（SEM）,transmission electron microscopy（TEM...The microstructures and mechanical properties of ferrite-based lightweight steel with different compositions were investigated by tensile test,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,X-ray diffraction（XRD）and thermodynamic calculation（TC）.It was shown that the ferrite-based lightweight steels with 5wt.%or 8wt.%Al were basically composed of ferrite,austenite andκ-carbide.As the annealing temperature increased,the content of the austenite in the steel gradually increased,while theκ-carbide gradually decomposed and finally disappeared.The mechanical properties of the steel with 5wt.%Al and 2wt.%Cr,composed of ferrite and Cr7C3carbide at different annealing temperatures,were significantly inferior to those of others.The steel containing 5wt.%Al,annealed at 820°C for 50sthen rapidly cooled to 400°C and held for 180s,can obtain the best product of strength and elongation（PSE）of 31242MPa·%.The austenite stability of the steel is better,and its PSE is higher.In addition,the steel with higher PSE has a more stable instantaneous strain hardening exponent（n value）,which is mainly caused by the effect of transformation induced plasticity（TRIP）.When theκ-carbide or Cr7C3carbide existed in the microstructure of the steel,there was an obvious yield plateau in the tensile curve,while its PSE decreased significantly.展开更多
An experimental 2618(Al-Cu-Mg-Fe-Ni) alloy added with trace Sc and Zr was prepared by ingot metallurgy (IM) method. The aging behavior of the alloy was studied by Vickers hardness measurement at 200℃ and 300℃. and ...An experimental 2618(Al-Cu-Mg-Fe-Ni) alloy added with trace Sc and Zr was prepared by ingot metallurgy (IM) method. The aging behavior of the alloy was studied by Vickers hardness measurement at 200℃ and 300℃. and the tensile properties of alloy specimens were measured at 20℃, 200℃, 250℃ and 300℃. The microstructure was observed by using optical microscope, SEM and TEM. It was found that the addition of Sc and Zr to 2618 alloy resulted in a primary Al_3(Sc,Zr) phase which could refine the grain because it acts as nuclei of heterogeneous crystallization in the melt during solidification. The secondary Al_3(Sc,Zr) particles were full coherent with matrix and had obvious precipitation hardening effect. They also made the S' phase precipitate more homogeneous. So the strength of alloy increases at both ambient and elevated temperatures without a decrease of ductility. The ductile fracture of alloy occurs by microvoid nucleation, growth and coalescence, so the microvoid coalescence is the dominant fracture mechanism.展开更多
Effects of abrasive concentration on material removal rate CMRR） and surtace quality m the chemical mecnamcal polishing （CMP） of light-emitting diode sapphire substrates are investigated. Experimental results show ...Effects of abrasive concentration on material removal rate CMRR） and surtace quality m the chemical mecnamcal polishing （CMP） of light-emitting diode sapphire substrates are investigated. Experimental results show that the MRR increases linearly with the abrasive concentration, while the rms roughness decreases with the increasing abrasive concentration. In addition, the in situ coefficient of friction （COF） is also conducted during the sapphire polishing process. The results present that COF increases sharply with the abrasive concentration up to 20 wt% and then shows a slight decrease from 20wt% to 40wt%. Temperature is a product of the friction force that is proportional to COF, which is an indicator for the mechanism of the sapphire CMP.展开更多
N2 and N3 are known as the transition points of the three principal stages of fatigue: initial accommodation, accretion of damage and terminal fatigue. Many experiments show that the ratios of N2/Nf and N3/Nf tend to ...N2 and N3 are known as the transition points of the three principal stages of fatigue: initial accommodation, accretion of damage and terminal fatigue. Many experiments show that the ratios of N2/Nf and N3/Nf tend to be stable even though the specific N2 and N3 values may fluctuate widely. The primary goal of this research is to study the piezomagnetic field surrounding AISI 1018 steel specimen under repeated loads and to find the ratio values of N2/Nf and N3/Nf by analyzing 11 sets of low-cycle fatigue data. An MTS-810 testing system with a peak capacity of 222 kN was used to obtain the data which consisted of stress, strain, and piezomagnetic field. A computer program was constructed to track the evolution of the piezomagnetic field and re- gression analysis was carried out to determine N2 and N3 values. It was observed that there exists a consistent relationship between N2 and Nf. The apparent invariance of the ratio N2/Nf implies that N2 may be identified as an index of performance in the early loading response of a specimen that forecasts its fatigue life, Nf. It has been demonstrated that measurements of the magnetic and mechanical hysteresis can yield significant insights into the various stages of the development of a fatigue critical microstructure which culminates in complete rupture of the material.展开更多
基金National Natural Science Foundation of China(grant No:12172092,82174488)Shanghai Key Laboratory of Acupuncture Mechanism and Acupoint Function(grant No:21DZ2271800)+1 种基金Military Medical Research Special Project of"Xinhuo Chuancheng"of Naval Medical UniversityMilitary Medical Talent Project of"San Hang"of Naval Medical University(project No:2019-QH-12).
文摘Objective:This study aims to clarify how the stimulation of acupuncture points is achieved by needles with different surface texture during acupuncture;it also seeks to lessen injury at the insertion site and increase the therapeutic efficacy of acupuncture,by simulating the mechanical effects of various needle surface patterns on Zusanli(ST36)without changing the radius of acupuncture needles.Methods:Five acupuncture needle models with different surface patterns,including the smooth needle,the lined needle,the ringed needle,the left-hand threaded needle and the right-hand threaded needle,and a layered model of the Zusanli acupoint were used to investigate how to reduce tissue damage and increase stimulation during acupuncture treatment,Puncturing of the skin as well as liftinginserting and twisting needle manipulations were simulated using these models,and the degree of damage and force of stimulation caused by the acupuncture needles with different surface patterns during acupuncturewerecompared.Results:The smooth needle and the lined needle caused the least tissue damage during insertion,while the left-hand threaded and the right-hand threaded needles caused the most damage.The ringed needle,the left-hand threaded needle and the right-hand threaded needle stimulated the acupoint tissue more during lifting-inserting manipulations,while the lined needle and the smooth needle produced less stimulation.The stimulation of the lined needle on the acupoint tissue was the largest during twisting manipulation,whereas the left-hand threaded needle and the right-hand threaded needle had smaller effects.In lifting-inserting and twisting manipulations,both the left-hand threaded needle and right-hand threaded needle provided more stimulation,but the torsion direction in which they produced better stimulation was theopposite.Conclusion:According to the simulation results,the ringed pattern enhances stimulation best in the lifting-inserting manipulation,whereas the lined pattern enhances stimulation best in the twisting manipulation.Both the right-hand and left-hand thread patterns have certain enhancing effects in these two operations.Taking the geometric properties of the pattern into account,the left-hand thread pattern and the right-hand thread pattern have the geometric characteristics of both the lined pattern and the ringed pattern.To conclude,a pattern perpendicular to the movement direction during the acupuncture manipulation creates more stimulation.These results have significance for future needle design.
基金Project supported by the National Natural Science Foundation of China(Grant No.10704031)the National Science Foundation for Fostering Talents in Basic Research of the National Natural Science Foundation of China(Grant No.J0630313)+1 种基金the Fundamental Research Fund for Physics and Mathematics of Lanzhou University,China(Grant No.Lzu05001)the Natural Science Foundation of Gansu Province,China(Grant No.3ZS061-A25-035)
文摘A theoretical study is carried out for the modification and implication of the effect on the type three level atom in a high-finesse optical cavity driven by light field including spontaneous emission and the cavity decay. Analytic expressions for the dipole force, the friction force, the optical potentials and the friction coefficient are obtained. Then the numerical and graphical methods are used to investigate the friction coefficient with the controlling parameters. It is shown that the friction coefficient is strongly dependent on the controlling parameters. The cooling rate can increase by one order of magnitude more than that of a two-level atomic system. The reason can be given using the dressed states and the Sisyphus cooling mechanism, which would stimulate further experimental investigations.
基金National Natural Science Foundation of China(12135008,12132005)。
文摘The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.
基金Supported by National Natural Science Foundation of China(Grant No.52275206).
文摘Grease is extensively used in rolling bearings due to its inherent sealing properties.However,mechanical degradation typically occurs,resulting in a significantly shorter lifespan for the grease compared to the bearing.Investigating aging mechanisms is essential.This study utilized rolling bearings to obtain mechanically aged greases.The aged samples were then subjected to do rheological test,FTIR test and friction test to examine the effects of aging time,radial load,and rotational speed.An innovative disk-ball-disk device was developed to study the friction characteristics of aged grease in rolling bearings.Additionally,a grease lubrication and friction model were proposed to further evaluate the lubrication performance of aged grease,using measured rheological parameters and the kinematic velocities of the disk-ball-disk device as inputs.The calculated friction coefficients matched well with disk-ball-disk experimental results.FTIR analysis revealed that the non-soap thickener’s structure remained stable,but additives depleted at high speeds.The structure of lithium soap thickener decomposed severely,leading to oil bleeding and a shortened replenishment duration.Over aging time,both greases had lower friction and viscosity due to gradual thickener breakdown,releasing bled oil and extending replenishment.Radial load minimally affected the properties of aged grease.This study may provide valuable insights into the aging mechanisms of grease and the enhancement of rolling bearing lubrication.
基金supported by the National Natural Science Foundation of China(No.12262020).
文摘This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.
文摘The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was eliminated because of the formation of Al2O3 particles. It was shown that Al and SiO2 reacted at 860℃. During the reaction, A1 atoms were mainly transferred to Al2O3 particles, and to some extent, diffused into MoSi2 grains. Both the toughness and strength of Al containing composites exceeded those of pure MoSi2 material. Bending strength and fracture toughness reach the highest value of 350 MPa, 4.05 MPa.m1/2, respectively, at ambient temperature when Al addition was of 3.5 wt pct.
基金Supported by the National Natural Science Foundation of China under Grant No 51372203the National Basic Research Program of China under Grant No 2011CB605806+1 种基金the Basic Research Foundation of Northwestern Polytechnical University under Grant Nos JCY20130114 and JCY20110248the Foreign Talents Introduction and Academic Exchange Program under Grant No B08040
文摘Structural, electronic and mechanical properties of the nH-SiC （n = 2, 4, 6, 8 and 10） polytypes are calculated by using the first-principles calculations based on the density-functional theory approach. The optimized lattice parameters of nH-SiC are in good agreement with the experimental data. The mechanical properties, including elastic constants, bulk modulus, Young＇s modulus, shear modulus and Poisson＇s ratio, are calculated. The analysis of elastic properties indicates that the effects of n on the mechanical properties of the five nil-SiC structures have no difference. The indirect band gap relationship for the live polytypes is Ebg2H 〉 Ebg4H 〉 Ebg6H 〉 Ebg10H 〉 EbgsH.
基金Support of Shanghai Science Foundation under Grant No.09ZR1402900 the National Science Foundation of China under Grant No.60676020 Supported in part by the Special Funds for Major State Basic Research (973 Project) under Grant No.2006CB302703
文摘As the channel length of metal-oxide-semiconductor field-effect transistors （MOSFETs） scales into the nanometer regime, quantum mechanical effects are becoming more and more significant. In this work, a model for the surrounding-gate （SG） nMOSFET is developed. The SchrSdinger equation is solved analytically. Some of the solutions are verified via results obtained from simulations. It is found that the percentage of the electrons with lighter conductivity mass increases as the silicon body radius decreases, or as the gate voltage reduces, or as the temperature decreases. The eentroid of inversion-layer is driven away from the silicon-oxide interface towards the silicon body, therefore the carriers will suffer less scattering from the interface and the electrons effective mobility of the SG nMOSFETs will be enhanced.
文摘A simple analytical model has been developed to study quantum mechanical effects （QME） in a germanium substrate MOSFET （metal oxide semiconductor field effect transistor）, which includes gate oxide tunneling considering the energy quantization effects in the substrate. Some alternate high dielectric constant materials to reduce the tunneling have also been studied. By comparing with the numerically reported results, the results match well with the existing reported work.
基金financially supported by the Ph.D. start-up funds of Jiangxi Science and Technology Normal University (Nos. 2023BSQD11, 2023BSQD13)Jiangxi Province Key Laboratory of Organic Functional Molecules (No. 2024SSY05141)。
文摘The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.
基金Project supported by the National Natural Science Foundation of China （Grant No 60578015）.
文摘The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06μm wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from 2.8 × 10^ 3 to 1.01 × 10^5pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.
基金National Natural Science Foundation of China,No.41171107,No.41371143,No.4401121
文摘The rapid development of high-speed rail（HSR） is influencing regional development, regional structure, commuting, and regional integration. East Asia is the region with the world＇s first and largest current operating and planned HSR network. In this paper, we examine the evolutionary mechanism and impacts on the transport circle and accessibility of HSR in East Asia. The results indicate that the HSR network first follows a ＂core-core＂ model and then forms a corridor in Japan, South Korea, and China Taiwan, but then forms a complete network in China Mainland. The current operating HSR lines are mostly distributed in regions with developed economies and dense populations, and more than half of the population and GDP in China can be served by HSR within 1 hour＇s travel time. The planned HSR network will expand to the western region of China and Japan and the southern region of South Korea. The development of the current operating and planned HSR network considerably enlarges the transport circle of core cities, especially cities along trunk HSR lines. This 1 h transport circle of core cities has formed continuous regions in the Yangtze River Delta, the Pearl River Delta, Tokyo, Seoul, and along trunk HSR lines. The HSR network will bring about substantial improvement in accessiblity, but also increase the inequality of nodal accessibility in China Mainland. Spatially, the spatial patterns of the weighted shortest travel time of cities in China Mainland, Japan, and South Korea all present the ＂core-peripheral structure＂, taking Zhengzhou, Tokyo, and Seoul, respectively, as core cities, and cities located along the trunk HSR lines gain large improvement in accessibility.
基金This work was supported by a grant from the NationalNatural Science Foundation of China (No. 30000159).
文摘BACKGROUND: Signal regulatory protein alpha1 (Sirpα1) is a negative regulatory factor, and inhibits receptor tyro- sine kinase-dependent cell proliferating signal. This study was undertaken to observe the effect of signal regulatory proteinα1 ( Sirpα1) on gankyrin, cyclin D1, CDK4 and Fas expression in Sk-hep1 mouse hepatoma carcinoma cell line. METHODS: BOSC 23 packed cells were respectively trans- fected by means of recombinated retrovirus including pLX- SN, pLXSN-Sirpα1 and pLXSN-Sirpα1Δ4Y2 with lipofec- tin, and various plasmid virus media (viral titer 2.1 × 106 CFU/ml) were collected and infected respectively in 80% confluent Sk-hepl cells. Transfected Sk-hep1 cells were se- lectively screened with G418 (1200 μg/ml), and Sk-hep1 cell lines transfected with various plasmids were obtained. The protein expressions of gankyrin, cyclin D1, CDK4 and Fas in various Sk-hep1 lines were determined by Western blotting. Various Sk-hep1 lines were recovered to culture with 10% fetal bovine serum at 12 hours and 24 hours after starving culture with free serum for 72 hours, and cells were collected to determine the percentage of S phase cells of proliferating cycle by flow cytometry. RESULTS: Sirpα1 transfection remarkably downregulated gankyrin and cyclin D1 expression. Sirpα1Δ4Y2 downregu- lation of gankyrin expression was greater than that of Sirpα1(P <0.05), but no significant effect of Sirpα1 and Sirpα1Δ4Y2 on CDK4 and Fas protein expression was ob- served in transfected Sk-hep1 lines (P >0.05). The per- centage of S phase cells significantly decreased in Sk-hep1 cells transfected with Sirpα1 and Sirpα1Δ4Y2 plasmids (vs pLXSN Sk-hep1, P <0.05). The percentage of S phase cells in various Sk-hep1 cells increased when recovering to culture with 10% fetal bovine serum at 12 hours, but the percentage of S phase cells in Sk-hep1 cells transfected with Sirpα1 was the lowest ( vs pLXSN and Sirpα1Δ4Y2 Sk- hepl, P<0.05). The percentage of S phase cells in trans- fected pLSXN Sk-hep1 cells was the largest (vs Sirpα1 and Sirpα1Δ4Y2 Sk-hepl, P <0. 05). There was no significant difference between the transfected Sirpα1 Sk-hepl cells and Sirpα1Δ4Y2 Sk-hep1 cells (P>0.05). CONCLUSIONS: Sirpα1 decreases gankyrin and cyclin D1 expression, and inhibits proliferation of liver carcinoma cells. It may be one of the forms for an Sirpα1 negative regulation of carcinogenesis and development of hepatocel- lular carcinoma.
基金supported by Fundamental Research Funds for the Central Universities:(No.SWU118105)support provided by the Australian Research Council Discovery Projects+1 种基金financial support from the Australia Research Council Discovery Early Career Researcher Award and Robinson Fellowship Scheme of the University of Sydneyfinancial support from the National Science Foundation of China(NSFC,Grant No.52001263)。
文摘The effect of lamellar orientation on the deformation behavior of eutectic high entropy alloy at the micrometer scale,and the roles of two rarely explored laminate orientations(i.e.,the lamellar orientation at~0°and 45°angles with the loading direction)in regulating size-dependent plasticity were investigated using in-situ micropillar compression tests.The alloy,CoCrFe NiTa_(0.395),consists of alternating layers of Laves and FCC phases.It was found that the yield stress of the 0°pillars scaled inversely with the pillar diameters,in which the underlying deformation mode was observed to transform from pillar kinking or buckling to shear banding as the diameter decreased.In the case of the 450 pillars with diameters ranging from 0.4 to 3μm,there exists a’weakest’diameter of~1μm,at which both constraint effect and dislocation starvation are ineffective.Irrespective of the lamellar orientations,the strain hardening rate decreased with decreasing pillar diameter due to the diminishing dislocation accumulation that originated from the softening nature of large shear bands in the 0°pillars,and the enhanced probability of dislocation annihilation at the increased free surfaces in the 45°pillars.The findings expand and deepen the understanding of the mechanical size effect in small-scale crystalline materials and,in so doing,provide a critical dimension for the development of high-performing materials used for nanoor microelectromechanical systems.
基金financially supported by the National Basic Research Program of China(2011CB610406)the Natural Science Foundation of Hei Longjiang Province(JC201209)the National Natural Science Foundation of China(51425402)
文摘The effect of excitation current intensity on the mechanical properties of ZL205 A castings solidified under a traveling magnetic field was studied. The results of the experiment indicate that the excitation current intensity of the traveling magnetic field has a great influence on the mechanical properties of the ZL205 A castings. When the excitation current intensity is 15 A, the tensile strength and elongation of ZL205 A alloy castings increase 27.2% and 67.7%, respectively, compared with those of the same alloy solidified under gravity. The improvement of mechanical properties is attributed to the decrease of micro-porosity in the alloy. Under the traveling magnetic field, the feeding pressure in the alloy melt before solidification can be enhanced due to the electromagnetic force. Moreover, the melt flow induced by the traveling magnetic field can decrease the temperature gradient. The feeding resistance will be increased because the temperature gradient decrease. So traveling magnetic field has an optimum effect on feeding.
文摘Ultrahigh-molecular-weight polyethylene(UtlMWPE) has been irradiated (0-40 Mrad) with a Co^(60) source at room temperature under vacuum. Their crystallinity has been investigated by DSC and SAXS A significant increase of heat of fusion can be seen at low irradiation doses, which is attributed to crystallization caused by chain scission during the process of irradiation. It is also observed that thickness of lamellae changes with irradiation dose. Young's modulus has been improved significantly after irradiation at low doses.
基金supported by the Shanghai Municipal Natural Science Foundation(Grant No.17ZR1410400)the Shanghai Municipal Science and Technology Commission(Grant Nos.15DZ2260300,15DZ2260301)
文摘The microstructures and mechanical properties of ferrite-based lightweight steel with different compositions were investigated by tensile test,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,X-ray diffraction（XRD）and thermodynamic calculation（TC）.It was shown that the ferrite-based lightweight steels with 5wt.%or 8wt.%Al were basically composed of ferrite,austenite andκ-carbide.As the annealing temperature increased,the content of the austenite in the steel gradually increased,while theκ-carbide gradually decomposed and finally disappeared.The mechanical properties of the steel with 5wt.%Al and 2wt.%Cr,composed of ferrite and Cr7C3carbide at different annealing temperatures,were significantly inferior to those of others.The steel containing 5wt.%Al,annealed at 820°C for 50sthen rapidly cooled to 400°C and held for 180s,can obtain the best product of strength and elongation（PSE）of 31242MPa·%.The austenite stability of the steel is better,and its PSE is higher.In addition,the steel with higher PSE has a more stable instantaneous strain hardening exponent（n value）,which is mainly caused by the effect of transformation induced plasticity（TRIP）.When theκ-carbide or Cr7C3carbide existed in the microstructure of the steel,there was an obvious yield plateau in the tensile curve,while its PSE decreased significantly.
文摘An experimental 2618(Al-Cu-Mg-Fe-Ni) alloy added with trace Sc and Zr was prepared by ingot metallurgy (IM) method. The aging behavior of the alloy was studied by Vickers hardness measurement at 200℃ and 300℃. and the tensile properties of alloy specimens were measured at 20℃, 200℃, 250℃ and 300℃. The microstructure was observed by using optical microscope, SEM and TEM. It was found that the addition of Sc and Zr to 2618 alloy resulted in a primary Al_3(Sc,Zr) phase which could refine the grain because it acts as nuclei of heterogeneous crystallization in the melt during solidification. The secondary Al_3(Sc,Zr) particles were full coherent with matrix and had obvious precipitation hardening effect. They also made the S' phase precipitate more homogeneous. So the strength of alloy increases at both ambient and elevated temperatures without a decrease of ductility. The ductile fracture of alloy occurs by microvoid nucleation, growth and coalescence, so the microvoid coalescence is the dominant fracture mechanism.
基金Supported by the National Major Scientific and Technological Special Project during the Twelfth Five-year Plan Period under Grant No 2011ZX02704the National Natural Science Foundation of China under Grant No 51205387the Science and Technology Commission of Shanghai under Grant Nos llnm0500300 and 14XD1425300
文摘Effects of abrasive concentration on material removal rate CMRR） and surtace quality m the chemical mecnamcal polishing （CMP） of light-emitting diode sapphire substrates are investigated. Experimental results show that the MRR increases linearly with the abrasive concentration, while the rms roughness decreases with the increasing abrasive concentration. In addition, the in situ coefficient of friction （COF） is also conducted during the sapphire polishing process. The results present that COF increases sharply with the abrasive concentration up to 20 wt% and then shows a slight decrease from 20wt% to 40wt%. Temperature is a product of the friction force that is proportional to COF, which is an indicator for the mechanism of the sapphire CMP.
基金Project supported by the National Natural Science Foundation of China (No. 50901067)the Technological Research and Development Programs of the Ministry of Railways (No. 2010G007-E), China
文摘N2 and N3 are known as the transition points of the three principal stages of fatigue: initial accommodation, accretion of damage and terminal fatigue. Many experiments show that the ratios of N2/Nf and N3/Nf tend to be stable even though the specific N2 and N3 values may fluctuate widely. The primary goal of this research is to study the piezomagnetic field surrounding AISI 1018 steel specimen under repeated loads and to find the ratio values of N2/Nf and N3/Nf by analyzing 11 sets of low-cycle fatigue data. An MTS-810 testing system with a peak capacity of 222 kN was used to obtain the data which consisted of stress, strain, and piezomagnetic field. A computer program was constructed to track the evolution of the piezomagnetic field and re- gression analysis was carried out to determine N2 and N3 values. It was observed that there exists a consistent relationship between N2 and Nf. The apparent invariance of the ratio N2/Nf implies that N2 may be identified as an index of performance in the early loading response of a specimen that forecasts its fatigue life, Nf. It has been demonstrated that measurements of the magnetic and mechanical hysteresis can yield significant insights into the various stages of the development of a fatigue critical microstructure which culminates in complete rupture of the material.
