The utilization of ironsand for preparing oxidized pellets poses challenges,including slow oxidation and low consolidation strength.The effects and function mechanisms of high-pressure grinding roll(HPGR)pretreatment ...The utilization of ironsand for preparing oxidized pellets poses challenges,including slow oxidation and low consolidation strength.The effects and function mechanisms of high-pressure grinding roll(HPGR)pretreatment on the oxidation and consolidation of ironsand pellets were investigated,and the energy utilization efficiency of HPGR with different roller pressure intensities was evaluated.The results indicate that HPGR pretreatment at 8 MPa improves the ironsand properties,with the specific surface area increasing by 740 cm^(2) g^(-1) and mechanical energy storage increasing by 2.5 kJ mol^(-1),which is conducive to oxidation and crystalline connection of particles.As roller pressure intensity increases to 16 MPa,more mechanical energy of HPGR is applied for crystal activation,with mechanical energy storage further rising by 18.1 kJ mol^(-1).The apparent activation energy for pellet oxidation initially decreases and then increases,reaching a minimum at 12 MPa.Simultaneously,the roasted pellets porosity decreases by 2.8%,while the compressive strength increases by 789 N.At higher roller pressure intensity,the densely connected structure between particles impedes gas diffusion within the pellets,diminishing the beneficial effects of HPGR on pellet oxidation.Moreover,excessive roller pressure intensity decreases the HPGR energy utilization efficiency.The optimal HPGR roller pressure intensity for ironsand is 12 MPa,at which the specific surface area increases by 790 cm^(2) g^(-1),mechanical energy storage increases by 10.6 kJ mol^(-1),the compressive strength of roasted pellets rises to 2816 N,and the appropriate preheating and roasting temperatures decrease by 250 and 125°C,respectively.展开更多
Mechanical activation (MA) is a significant pretreatment technique for enhancing the dissolution of mineral;however, its promotion effect on the role of pyrite during chalcopyrite bioleaching has not been elucidated u...Mechanical activation (MA) is a significant pretreatment technique for enhancing the dissolution of mineral;however, its promotion effect on the role of pyrite during chalcopyrite bioleaching has not been elucidated up to now. In this study, the effect of MA on the role of pyrite on chalcopyrite bioleaching mediated by Acidithiobacillus ferroxidans was investigated by X-ray diffraction, scanning electron microscopy, particle size distribution analysis, and electrochemical measurement. The results showed MA could significantly reduce the minerals particle size, and increase the specific surface area and surface energy of minerals. For example, the d50 of chalcopyrite reduced from 13.40 to 0.31 μm after MA. The copper extraction of mixed MA-chalcopyrite and MA-pyrite system was 63.4%, which exhibited a 51.8% enhancement compared to the non-activated mixed system. Electrochemical experiments identified that the strengthening effect of pyrite on chalcopyrite dissolution was negligible before MA. After MA, the dissolution mechanism of chalcopyrite was not changed, and pyrite could not only provide additional oxidants (acids and iron) but also act as the cathode in the galvanic couple. In this case, the bioleaching of chalcopyrite was accelerated. Therefore, a model of the promotion effect of mechanical activation on the role of pyrite on chalcopyrite bioleaching was proposed.展开更多
Limestone was pretreated via the mechanical activation method,and burnt lime was partially substituted by the pretreated limestone for better sinter indices and lower sintering costs.With the reduction in the size dis...Limestone was pretreated via the mechanical activation method,and burnt lime was partially substituted by the pretreated limestone for better sinter indices and lower sintering costs.With the reduction in the size distribution of the pretreated limestone,the particle morphology,the activity of the calcined limestone and the fluidity of the liquid phase during sintering are all improved.When the substitution ratio of the pretreated limestone for burnt lime is kept at 50%,the granulation performance and sinter indices in sinter pot tests are both better compared with that of the base case.Much denser interleaved texture in product sinter is formed with the reduction of sinter porosity and improvement of silico-ferrite of calcium and alumina amount.When the particle size of the pretreated limestone is maintained within the optimal range of 0–2 mm,the tumble index,yield and productivity increase by 7.2%,2.6%and 11.2%,respectively,while the solid fuel rate decreases by 8.7%.In the corresponding sinter industry production,the tumble index and output of the product sinter are comparable to those of the base case,while the coke dosage is reduced by 9.0%.Reduction index and reduction degradation index(RDI_(+3.15))are both higher than 74%.The cost of raw materials in sintering process can be greatly reduced.展开更多
The synergistic impact of mechanical ball milling and flue gas desulfurization(FGD)gypsum on the dealkalization of bauxite residue was investigated through integrated analyses of solution chemistry,mineralogy,and micr...The synergistic impact of mechanical ball milling and flue gas desulfurization(FGD)gypsum on the dealkalization of bauxite residue was investigated through integrated analyses of solution chemistry,mineralogy,and microtopography.The results showed a significant decrease in Na_(2)O content(>30 wt.%)of FGD gypsum-treated bauxite residue after 30 min of mechanical ball milling.Mechanical ball milling resulted in differentiation of the elemental distribution,modification of the minerals in crystalline structure,and promotion in the dissolution of alkaline minerals,thus enhancing the acid neutralization capacity of bauxite residue.5 wt.%FGD gypsum combined with 30 min mechanical ball milling was optimal for the dealkalization of bauxite residue.展开更多
Spontaneously polarized crystals with intrinsic electric dipole moment have attracted immense interest as excellent functional materials for extensive applications.It is of great significance to engineer sustainable s...Spontaneously polarized crystals with intrinsic electric dipole moment have attracted immense interest as excellent functional materials for extensive applications.It is of great significance to engineer sustainable spontaneously polarized materials with fascinating characteristics and performance for activating air and water.Herein,a novel strategy based on the synergy of mechanical activation(MA)and biomimetic mineralization(BM)was created to construct spontaneously polarized ceramic.MA induced the structural damage of clay and promoted the dissolution of ions and the release of free proteins,contributing to the formation of silicate precursor in BM process.After high temperature firing,the silicate precursor in clay was converted to form KCa_(3)AlCa_(3)Si_(4)O_(16)(hexagonal crystal system,L^(6)symmetry type,and P63 space group)in the resulting spontaneously polarized ceramic.The non-centrosymmetric structure of KCa_(3)AlCa_(3)Si4O_(16)and the high intrinsic electric dipole moments contributed by K(1)polyhedrons resulted in high spontaneous polarization(0.2322μC/cm^(2))and far-infrared emissivity(0.951)of spontaneously polarized ceramic.In air,spontaneously polarized ceramic can activate H_(2)O and O_(2)molecules to form negative air ions owing to surface electric field.In water,spontaneously polarized ceramic can disaggregate large water clusters to form small water clusters ascribed to surface electric field and far-infrared emission;water pH can be regulated from weak acidity to approximate neutrality via the capture of electrons by H+ions to produce releasable hydrogen gas.This work provides great promise for rational design and synthesis of spontaneously polarized materials for functional applications.展开更多
The loss of rare earths(REs)takes place during the pre-decalcification process of mixed rare earth concentrate.In an effort to reduce such RE loss,a novel idea to improve the leaching selectivity of Ca to REs by apply...The loss of rare earths(REs)takes place during the pre-decalcification process of mixed rare earth concentrate.In an effort to reduce such RE loss,a novel idea to improve the leaching selectivity of Ca to REs by applying selective mechanical activation was proposed.First,regarding the key minerals affecting the leaching selectivity of Ca to REs,the differences in the mechanical activation behaviors of CaF_(2) and REFCO_(3) were studied,and we find that the lattice strain of CaF_(2) increases from 0.21%to 0.42%,whereas that of REFCO_(3) increases from 0.31%to 0.40%.Notably,CaF_(2) demonstrates a larger lattice strain than REFCO_(3),indicating greater mechanical activation energy storage and higher leaching activity.Next,the HCl leaching process was studied.A significant leaching selectivity of Ca to REs,from 21.6 to 35.1,is achieved through mechanical activation.The Ca leaching rate reaches 80.7%when the RE loss is 2.3%in the activated sample.This study provides an novel approach for achieving selective extraction of specific components via mechanical activation pretreatment.展开更多
The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction ...The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows：oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.展开更多
Neutral leach residue of zinc calcine （NLRZC） was mechanically activated by a stirring ball mill. Subsequently, the changes in physicochemical properties and dissolution kinetics in sulphuric acid were studied. The ...Neutral leach residue of zinc calcine （NLRZC） was mechanically activated by a stirring ball mill. Subsequently, the changes in physicochemical properties and dissolution kinetics in sulphuric acid were studied. The crystalline structure, morphology, particle size and specific surface area of the non-activated and mechanically activated NLRZC were characterized by X-ray diffraction, scanning electron microscope, particle size analyzer and volumetric adsorption analyzer, respectively. The characterization results indicate that mechanical activation （MA） induced remarkable changes in the physicochemical properties of NLRZC. The leaching experiments show that MA significantly enhances the leaching reactivity of NLRZC using the zinc extraction as evaluating index. After NLRZC is mechanically activated for 30 min and 60 min, the activation energy decreases from 56.6 kJ/mol of non-activated NLRZC to 36.1 kJ/mol and 29.9 kJ/mol, respectively. The reaction orders of the non-activated, 30 and 60 min activated NLRZC dissolution with respect to H2SO4 concentration were found to be 0.34, 0.30, and 0.29, respectively.展开更多
In order to uncover the intrinsic reasons for spontaneous combustion of sulfide minerals,representative samples were collected from typical metal mines to carry out the mechanical activation experiment.The structures ...In order to uncover the intrinsic reasons for spontaneous combustion of sulfide minerals,representative samples were collected from typical metal mines to carry out the mechanical activation experiment.The structures and heat behaviors of activated samples were characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD） analysis,and simultaneous thermal analysis（STA）.It is found that the sulfide minerals after mechanical activation show many changes with increased specific surface areas,aggregation phenomenon,decreased diffraction peak intensity,broadened diffraction peak,declined initial temperatures of heat release and self-ignition points.A new theory for explaining the spontaneous combustion of sulfide minerals is put forward：the chemical reaction activity of sulfide minerals is heightened by all kinds of mechanical forces during the mining,and the spontaneous combustion takes place finally under proper environment.展开更多
With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite...With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.展开更多
Protein Kinase G(PKG)is an important intracellular signal transduction enzyme,and its activity is modulated by cyclic guanosine monophosphate(cGMP).PKG plays a pivotal role in various significant physiological process...Protein Kinase G(PKG)is an important intracellular signal transduction enzyme,and its activity is modulated by cyclic guanosine monophosphate(cGMP).PKG plays a pivotal role in various significant physiological processes,including vascular smooth muscle relaxation,myocardial cell function regulation,neuron growth,and synaptic plasticity,et al.In recent years,the role of PKG in diseases has gradually attracted attention,and the abnormalities in its signaling pathway are closely related to the occurrence and development of cardiovascular and neurological diseases.Although PKG has been widely studied,its complex functions in different physiological systems and potential innovative applications still need to be further explored.This article reviews the purification techniques for PKG,discusses the advantages and disadvantages of different extraction methods,summarizes the structure and activation mechanism of each domain of PKG,and analyzes the physiological functions of PKG in organisms,especially the well-established roles in the cardiovascular system,nervous system,and endocrine system.The emerging therapeutic applications of PKG are also reviewed.In addition,the challenges of this field are proposed at the end.展开更多
A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS...A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.展开更多
The use of mechanical activation to enhance gold recovery from a CuPbZn complex sulfide concentrate was investigated. The effects of milling time, ball size, sample to ball ratio and milling speed on thiosulfate leach...The use of mechanical activation to enhance gold recovery from a CuPbZn complex sulfide concentrate was investigated. The effects of milling time, ball size, sample to ball ratio and milling speed on thiosulfate leaching were studied. Under optimum conditions of milling time 1 h, ball size 20 mm, sample to ball ratio 1/15 and mill speed 600 r/min, nearly 78% of sample is amorphized, particle size decreases from d100=30 μm to d100=8 μm, specific surface area increases from 1.3 m2/g to 4.6 m2/g and gold recovery enhances from 17.4 % in non-activated sample to 73.26 %.展开更多
On the basis of analyzing coal gangue＇s chemical and mineral compositions, the structure change of coal gangue during the mechanical activation was investigated by XRD, FTIR, NMR, and the mechanical strength of the c...On the basis of analyzing coal gangue＇s chemical and mineral compositions, the structure change of coal gangue during the mechanical activation was investigated by XRD, FTIR, NMR, and the mechanical strength of the cement doped coal gangue with various specific surface area was tested. The experimental results indicate that, the lattice structure of metakaolin in coal gangue samples calcined at 700 ℃ disorganizes gradually and becomes disordered, and the lattice structure of α-quartz is distorted slightly. The pozzolanic activity of the coal gangue increases obviously with its structural disorganization.展开更多
The effect of mechanical activation on the granulometric parameters,microstructure,and leaching efficiency of chalcopyrite was evaluated,and the occurrence/transition of agglomeration and aggregation was discussed.The...The effect of mechanical activation on the granulometric parameters,microstructure,and leaching efficiency of chalcopyrite was evaluated,and the occurrence/transition of agglomeration and aggregation was discussed.The results showed that in 8 h of milling treatment,the agglomeration and the microstructure did not affect each other.However,with prolonging milling time,the crystallite size tended to reach a saturation value,and the stagnating microstructural changes led to the replacement of agglomeration by aggregation.The leaching results indicated that the mechanical activation can strongly enhance the reactivity of chalcopyrite and the hindering effect of aggregation on leaching was considerably greater than that of agglomeration.Consequently,after 8 h of milling,the maximum Cu leaching rate of 80.13%was achieved after 4 h of acid leaching.展开更多
Mechanical activation and liquid phase sintering were used to manufacture high performance Mo-Cu alloy and develop new processes. The microstructures and properties of the alloy were investigated. The experimental res...Mechanical activation and liquid phase sintering were used to manufacture high performance Mo-Cu alloy and develop new processes. The microstructures and properties of the alloy were investigated. The experimental results showed that: (1) the ball milled Mo/Cu powder has lamellar structure, (2) the microstructures of the sintered Mo-Cu alloy were homogenous compound structures of adhesive phase Cu linking Mo grains, (3) Mo grains frequently strung or gathered in Cu phase, and (4) the full densities of Mo-Cu alloy was achieved through sintering and special densification process. As a result, the properties of the alloy are good enough to satisfy various requirements.展开更多
Mechanically activated W-Cu powders were sintered by a spark plasma sinteringsystem (SPS) in order to develop a new process and improve the properties of the alloy. Propertiessuch as density and hardness were measured...Mechanically activated W-Cu powders were sintered by a spark plasma sinteringsystem (SPS) in order to develop a new process and improve the properties of the alloy. Propertiessuch as density and hardness were measured. The microstructures of the sintered W-Cu alloy sampleswere observed by SEM (scanning electron microscope). The results show that spark plasma sinteringcan obviously lower the sintering temperature and increase the density of the alloy. This processcan also improve the hardness of the alloy. SPS is an effective method to obtain W-Cu powders withhigh density and superior physical properties.展开更多
The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperatu...The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from le- pidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and re- sponse-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphi- zation and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.展开更多
Mechanical activation was used to improve the extraction of chromium in molten NaOH.It is observed that the extraction ratio reaches 97% after leaching for 200 min when chromite ore is mechanically activated for 10 mi...Mechanical activation was used to improve the extraction of chromium in molten NaOH.It is observed that the extraction ratio reaches 97% after leaching for 200 min when chromite ore is mechanically activated for 10 min,but only 34% if not activated.Mechanical activation can decrease the particle size,increase the surface area,and enhance the lattice distortion.Further,the mechanisms for mechanical activation were exposed.The results show that the mechanical activation mainly focuses on chromite ore particle size decrease and the lattice distortion.The formation of aggregation weakens the strengthening effect of mechanical activation for releasing high surface energy.展开更多
Mechanical activation(MA) of malachite was carried out by dry planetary grinding(DPG) and wet Isa grinding(WIG) methods. When the rotational speed was increased to 400 r/min in DPG, the specific surface area of malach...Mechanical activation(MA) of malachite was carried out by dry planetary grinding(DPG) and wet Isa grinding(WIG) methods. When the rotational speed was increased to 400 r/min in DPG, the specific surface area of malachite reached the maximum and the particle size reached the minimum of 0.7–100 μm. Agglomeration occurred between mineral particles when the rotational speed was increased to 580 r/min in DPG.However, no agglomeration was observed among particles with sizes 0.4–3 μm in WIG. X-ray diffraction analysis showed that, at a 580 r/min rotational speed in DPG, the amorphization degree of malachite was 53.12%, whereas that in WIG was 71.40%, indicating that MA led to amorphization and distortion of crystal structures. In addition, in the Fourier transform infrared(FT-IR) spectra of activated malachite, the bands associated with –OH, CO_3^(2-)and metal lattice vibrations of Cu–O and Cu–OH were weakened, and a new H–O–H bending mode and peaks of gaseous CO_2 appeared, indicating that MA decreased the band energy, enhanced dihydroxylation, and increased the chemical reactivity of the malachite.Furthermore, the leaching behavior of copper ore was greatly improved by MA.展开更多
基金financially supported by the General Program of National Natural Science Foundation of China(No.52174330)Hunan Provincial Innovation Foundation for Postgraduate(No.QL20220069)Postgraduate Innovative Project of Central South University(No.1053320214756).
文摘The utilization of ironsand for preparing oxidized pellets poses challenges,including slow oxidation and low consolidation strength.The effects and function mechanisms of high-pressure grinding roll(HPGR)pretreatment on the oxidation and consolidation of ironsand pellets were investigated,and the energy utilization efficiency of HPGR with different roller pressure intensities was evaluated.The results indicate that HPGR pretreatment at 8 MPa improves the ironsand properties,with the specific surface area increasing by 740 cm^(2) g^(-1) and mechanical energy storage increasing by 2.5 kJ mol^(-1),which is conducive to oxidation and crystalline connection of particles.As roller pressure intensity increases to 16 MPa,more mechanical energy of HPGR is applied for crystal activation,with mechanical energy storage further rising by 18.1 kJ mol^(-1).The apparent activation energy for pellet oxidation initially decreases and then increases,reaching a minimum at 12 MPa.Simultaneously,the roasted pellets porosity decreases by 2.8%,while the compressive strength increases by 789 N.At higher roller pressure intensity,the densely connected structure between particles impedes gas diffusion within the pellets,diminishing the beneficial effects of HPGR on pellet oxidation.Moreover,excessive roller pressure intensity decreases the HPGR energy utilization efficiency.The optimal HPGR roller pressure intensity for ironsand is 12 MPa,at which the specific surface area increases by 790 cm^(2) g^(-1),mechanical energy storage increases by 10.6 kJ mol^(-1),the compressive strength of roasted pellets rises to 2816 N,and the appropriate preheating and roasting temperatures decrease by 250 and 125°C,respectively.
基金Project(GZC20233199) supported by the Postdoctoral Fellowship Program of CPSF,ChinaProject(2022YFC2105300) supported by the National Key Research and Development Program of China。
文摘Mechanical activation (MA) is a significant pretreatment technique for enhancing the dissolution of mineral;however, its promotion effect on the role of pyrite during chalcopyrite bioleaching has not been elucidated up to now. In this study, the effect of MA on the role of pyrite on chalcopyrite bioleaching mediated by Acidithiobacillus ferroxidans was investigated by X-ray diffraction, scanning electron microscopy, particle size distribution analysis, and electrochemical measurement. The results showed MA could significantly reduce the minerals particle size, and increase the specific surface area and surface energy of minerals. For example, the d50 of chalcopyrite reduced from 13.40 to 0.31 μm after MA. The copper extraction of mixed MA-chalcopyrite and MA-pyrite system was 63.4%, which exhibited a 51.8% enhancement compared to the non-activated mixed system. Electrochemical experiments identified that the strengthening effect of pyrite on chalcopyrite dissolution was negligible before MA. After MA, the dissolution mechanism of chalcopyrite was not changed, and pyrite could not only provide additional oxidants (acids and iron) but also act as the cathode in the galvanic couple. In this case, the bioleaching of chalcopyrite was accelerated. Therefore, a model of the promotion effect of mechanical activation on the role of pyrite on chalcopyrite bioleaching was proposed.
基金supported by Natural Science Foundation of Chongqing(No.CSTB2023NSCQ-BHX0166)Postdoctoral Science Foundation of China(No.2024T171095)Fundamental Research Funds for the Central Universities(No.2024CDJXY003).
文摘Limestone was pretreated via the mechanical activation method,and burnt lime was partially substituted by the pretreated limestone for better sinter indices and lower sintering costs.With the reduction in the size distribution of the pretreated limestone,the particle morphology,the activity of the calcined limestone and the fluidity of the liquid phase during sintering are all improved.When the substitution ratio of the pretreated limestone for burnt lime is kept at 50%,the granulation performance and sinter indices in sinter pot tests are both better compared with that of the base case.Much denser interleaved texture in product sinter is formed with the reduction of sinter porosity and improvement of silico-ferrite of calcium and alumina amount.When the particle size of the pretreated limestone is maintained within the optimal range of 0–2 mm,the tumble index,yield and productivity increase by 7.2%,2.6%and 11.2%,respectively,while the solid fuel rate decreases by 8.7%.In the corresponding sinter industry production,the tumble index and output of the product sinter are comparable to those of the base case,while the coke dosage is reduced by 9.0%.Reduction index and reduction degradation index(RDI_(+3.15))are both higher than 74%.The cost of raw materials in sintering process can be greatly reduced.
基金the National Natural Science Foundation of China(Nos.42177391,42077379)the Natural Science Foundation of Hunan Province,China(No.2022JJ20060)+1 种基金the Central South University Innovation-driven Research Program,China(No.2023CXQD065)the Fundamental Research Funds for the Central Universities of Central South University,China(No.2023ZZTS0800).
文摘The synergistic impact of mechanical ball milling and flue gas desulfurization(FGD)gypsum on the dealkalization of bauxite residue was investigated through integrated analyses of solution chemistry,mineralogy,and microtopography.The results showed a significant decrease in Na_(2)O content(>30 wt.%)of FGD gypsum-treated bauxite residue after 30 min of mechanical ball milling.Mechanical ball milling resulted in differentiation of the elemental distribution,modification of the minerals in crystalline structure,and promotion in the dissolution of alkaline minerals,thus enhancing the acid neutralization capacity of bauxite residue.5 wt.%FGD gypsum combined with 30 min mechanical ball milling was optimal for the dealkalization of bauxite residue.
基金the National Natural Science Foundation of China(nos.22008041 and 22178074)the Natural Science Foundation of Guangxi Province,China(nos.2019GXNSFDA245020 and 2020GXNSFGA297001).
文摘Spontaneously polarized crystals with intrinsic electric dipole moment have attracted immense interest as excellent functional materials for extensive applications.It is of great significance to engineer sustainable spontaneously polarized materials with fascinating characteristics and performance for activating air and water.Herein,a novel strategy based on the synergy of mechanical activation(MA)and biomimetic mineralization(BM)was created to construct spontaneously polarized ceramic.MA induced the structural damage of clay and promoted the dissolution of ions and the release of free proteins,contributing to the formation of silicate precursor in BM process.After high temperature firing,the silicate precursor in clay was converted to form KCa_(3)AlCa_(3)Si_(4)O_(16)(hexagonal crystal system,L^(6)symmetry type,and P63 space group)in the resulting spontaneously polarized ceramic.The non-centrosymmetric structure of KCa_(3)AlCa_(3)Si4O_(16)and the high intrinsic electric dipole moments contributed by K(1)polyhedrons resulted in high spontaneous polarization(0.2322μC/cm^(2))and far-infrared emissivity(0.951)of spontaneously polarized ceramic.In air,spontaneously polarized ceramic can activate H_(2)O and O_(2)molecules to form negative air ions owing to surface electric field.In water,spontaneously polarized ceramic can disaggregate large water clusters to form small water clusters ascribed to surface electric field and far-infrared emission;water pH can be regulated from weak acidity to approximate neutrality via the capture of electrons by H+ions to produce releasable hydrogen gas.This work provides great promise for rational design and synthesis of spontaneously polarized materials for functional applications.
基金Project supported by the National Natural Science Foundation of China(52004252)Natural Science Foundation ofHenan Province(222300420548)Strategic Research and Consulting Project of Chinese Academy of Engineering(2022-XBZD-07)。
文摘The loss of rare earths(REs)takes place during the pre-decalcification process of mixed rare earth concentrate.In an effort to reduce such RE loss,a novel idea to improve the leaching selectivity of Ca to REs by applying selective mechanical activation was proposed.First,regarding the key minerals affecting the leaching selectivity of Ca to REs,the differences in the mechanical activation behaviors of CaF_(2) and REFCO_(3) were studied,and we find that the lattice strain of CaF_(2) increases from 0.21%to 0.42%,whereas that of REFCO_(3) increases from 0.31%to 0.40%.Notably,CaF_(2) demonstrates a larger lattice strain than REFCO_(3),indicating greater mechanical activation energy storage and higher leaching activity.Next,the HCl leaching process was studied.A significant leaching selectivity of Ca to REs,from 21.6 to 35.1,is achieved through mechanical activation.The Ca leaching rate reaches 80.7%when the RE loss is 2.3%in the activated sample.This study provides an novel approach for achieving selective extraction of specific components via mechanical activation pretreatment.
基金Project(2009FJ3082)supported by Research Project of Science and Technology in Hunan Province,ChinaProject(2007CB613606)supported by the National Basic Research Program of China
文摘The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows：oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.
基金Project(51064002)supported by the National Natural Science Foundation of ChinaProject(0728238)supported by the Natural Science Foundation of Guangxi Province,China
文摘Neutral leach residue of zinc calcine （NLRZC） was mechanically activated by a stirring ball mill. Subsequently, the changes in physicochemical properties and dissolution kinetics in sulphuric acid were studied. The crystalline structure, morphology, particle size and specific surface area of the non-activated and mechanically activated NLRZC were characterized by X-ray diffraction, scanning electron microscope, particle size analyzer and volumetric adsorption analyzer, respectively. The characterization results indicate that mechanical activation （MA） induced remarkable changes in the physicochemical properties of NLRZC. The leaching experiments show that MA significantly enhances the leaching reactivity of NLRZC using the zinc extraction as evaluating index. After NLRZC is mechanically activated for 30 min and 60 min, the activation energy decreases from 56.6 kJ/mol of non-activated NLRZC to 36.1 kJ/mol and 29.9 kJ/mol, respectively. The reaction orders of the non-activated, 30 and 60 min activated NLRZC dissolution with respect to H2SO4 concentration were found to be 0.34, 0.30, and 0.29, respectively.
基金Project(2012J05088) supported by the Natural Science Foundation of Fujian Province,ChinaProject(022409) supported by the School Talent Foundation of Fuzhou University,China
文摘In order to uncover the intrinsic reasons for spontaneous combustion of sulfide minerals,representative samples were collected from typical metal mines to carry out the mechanical activation experiment.The structures and heat behaviors of activated samples were characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD） analysis,and simultaneous thermal analysis（STA）.It is found that the sulfide minerals after mechanical activation show many changes with increased specific surface areas,aggregation phenomenon,decreased diffraction peak intensity,broadened diffraction peak,declined initial temperatures of heat release and self-ignition points.A new theory for explaining the spontaneous combustion of sulfide minerals is put forward：the chemical reaction activity of sulfide minerals is heightened by all kinds of mechanical forces during the mining,and the spontaneous combustion takes place finally under proper environment.
基金Project(2022YFC2105300) supported by the National Key Research and Development Program of ChinaProject(52274288) supported by the National Natural Science Foundation of China。
文摘With the growing awareness of environmental protection and the increasing demand for rare earth elements(REEs),it has become necessary to efficiently remove and recover REEs from mine wastewater.In this study,jarosite(Jar)and schwertmannite(Sch)were biosynthesized using Acidithiobacillus ferrooxidans for the adsorption of REEs.Additionally,the adsorption capacities of Jar and Sch for La^(3+),Ce^(3+),Pr^(3+),Nd^(3+),Sm^(3+),Gd^(3+),Dy^(3+),and Y^(3+)in mine wastewater were improved by mechanical activation.XRD,FTIR,BET,and SEM-EDS analyses revealed that mechanical activation did not alter the phase of the material,but increased the amount of surface-OH and SO42−groups,as well as the specific surface area.This significantly enhanced the adsorption performance of Jar and Sch for REEs.The optimum adsorption time and pH were determined through batch adsorption experiments.Besides,the adsorption kinetics were studied and found to align well with the pseudo-second-order model.Furthermore,the thermodynamic parameters(ΔG^(Θ),ΔH^(Θ)andΔS^(Θ))and adsorption isotherms were analyzed.The results indicated that mechanically activated schwertmannite(M-Sch)exhibited superior adsorption performance for REEs compared to mechanically activated jarosite(M-Jar).Moreover,M-Sch was reusable and exhibited high adsorption efficiency of REEs in actual mine wastewater,exceeding 92%.
基金supported by the National Natural Science Foundation of China(Nos.22374033,22174031,22407037)the Natural Science Foundation of Heilongjiang Province(No.ZD2022B001).
文摘Protein Kinase G(PKG)is an important intracellular signal transduction enzyme,and its activity is modulated by cyclic guanosine monophosphate(cGMP).PKG plays a pivotal role in various significant physiological processes,including vascular smooth muscle relaxation,myocardial cell function regulation,neuron growth,and synaptic plasticity,et al.In recent years,the role of PKG in diseases has gradually attracted attention,and the abnormalities in its signaling pathway are closely related to the occurrence and development of cardiovascular and neurological diseases.Although PKG has been widely studied,its complex functions in different physiological systems and potential innovative applications still need to be further explored.This article reviews the purification techniques for PKG,discusses the advantages and disadvantages of different extraction methods,summarizes the structure and activation mechanism of each domain of PKG,and analyzes the physiological functions of PKG in organisms,especially the well-established roles in the cardiovascular system,nervous system,and endocrine system.The emerging therapeutic applications of PKG are also reviewed.In addition,the challenges of this field are proposed at the end.
基金supported by the National Natural Science Foundation of China(No.22378308)Jing-Jin-Ji Regional Integrated Environmental Improvement-National Science and Technology Major Project(No.2024ZD1200301–2)the Scientific and Technological Project of Yunnan Precious Metal Laboratory(No.YPML2023050202)。
文摘A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.
基金supported by Iran Mineral Processing Research Center (IMPRC)the IMPRC for the financial support of this work
文摘The use of mechanical activation to enhance gold recovery from a CuPbZn complex sulfide concentrate was investigated. The effects of milling time, ball size, sample to ball ratio and milling speed on thiosulfate leaching were studied. Under optimum conditions of milling time 1 h, ball size 20 mm, sample to ball ratio 1/15 and mill speed 600 r/min, nearly 78% of sample is amorphized, particle size decreases from d100=30 μm to d100=8 μm, specific surface area increases from 1.3 m2/g to 4.6 m2/g and gold recovery enhances from 17.4 % in non-activated sample to 73.26 %.
基金Funded by the Key Laboratory Foundation of Ecological-Environment Materials (Yancheng Institute of Technology) of Jiangsu Province (XKY2006020)the Natural Science Foundation of Jiangsu Provincial Education Depart-ment(07KJB430123)
文摘On the basis of analyzing coal gangue＇s chemical and mineral compositions, the structure change of coal gangue during the mechanical activation was investigated by XRD, FTIR, NMR, and the mechanical strength of the cement doped coal gangue with various specific surface area was tested. The experimental results indicate that, the lattice structure of metakaolin in coal gangue samples calcined at 700 ℃ disorganizes gradually and becomes disordered, and the lattice structure of α-quartz is distorted slightly. The pozzolanic activity of the coal gangue increases obviously with its structural disorganization.
基金the Special Fund for the National Natural Science Foundation of China(U1608254)the National Key R&D Program of China(2018YFC1902002).
文摘The effect of mechanical activation on the granulometric parameters,microstructure,and leaching efficiency of chalcopyrite was evaluated,and the occurrence/transition of agglomeration and aggregation was discussed.The results showed that in 8 h of milling treatment,the agglomeration and the microstructure did not affect each other.However,with prolonging milling time,the crystallite size tended to reach a saturation value,and the stagnating microstructural changes led to the replacement of agglomeration by aggregation.The leaching results indicated that the mechanical activation can strongly enhance the reactivity of chalcopyrite and the hindering effect of aggregation on leaching was considerably greater than that of agglomeration.Consequently,after 8 h of milling,the maximum Cu leaching rate of 80.13%was achieved after 4 h of acid leaching.
文摘Mechanical activation and liquid phase sintering were used to manufacture high performance Mo-Cu alloy and develop new processes. The microstructures and properties of the alloy were investigated. The experimental results showed that: (1) the ball milled Mo/Cu powder has lamellar structure, (2) the microstructures of the sintered Mo-Cu alloy were homogenous compound structures of adhesive phase Cu linking Mo grains, (3) Mo grains frequently strung or gathered in Cu phase, and (4) the full densities of Mo-Cu alloy was achieved through sintering and special densification process. As a result, the properties of the alloy are good enough to satisfy various requirements.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50174007)
文摘Mechanically activated W-Cu powders were sintered by a spark plasma sinteringsystem (SPS) in order to develop a new process and improve the properties of the alloy. Propertiessuch as density and hardness were measured. The microstructures of the sintered W-Cu alloy sampleswere observed by SEM (scanning electron microscope). The results show that spark plasma sinteringcan obviously lower the sintering temperature and increase the density of the alloy. This processcan also improve the hardness of the alloy. SPS is an effective method to obtain W-Cu powders withhigh density and superior physical properties.
基金the doctorate grant ref.9244/13-1 supplied by CAPES Foundation,Ministry of Education of Brazil
文摘The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from le- pidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and re- sponse-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphi- zation and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.
基金Project(2009AA06XK1485430) supported by the National Hi-tech Research and Development Program of ChinaProject(2007CB613501) supported by the National Basic Research Program of China
文摘Mechanical activation was used to improve the extraction of chromium in molten NaOH.It is observed that the extraction ratio reaches 97% after leaching for 200 min when chromite ore is mechanically activated for 10 min,but only 34% if not activated.Mechanical activation can decrease the particle size,increase the surface area,and enhance the lattice distortion.Further,the mechanisms for mechanical activation were exposed.The results show that the mechanical activation mainly focuses on chromite ore particle size decrease and the lattice distortion.The formation of aggregation weakens the strengthening effect of mechanical activation for releasing high surface energy.
基金financially supported by the Special Funds for the National Natural Science Foundation of China(No.U1608254)the National Key R&D Program of China(No.2018YFC1902002)
文摘Mechanical activation(MA) of malachite was carried out by dry planetary grinding(DPG) and wet Isa grinding(WIG) methods. When the rotational speed was increased to 400 r/min in DPG, the specific surface area of malachite reached the maximum and the particle size reached the minimum of 0.7–100 μm. Agglomeration occurred between mineral particles when the rotational speed was increased to 580 r/min in DPG.However, no agglomeration was observed among particles with sizes 0.4–3 μm in WIG. X-ray diffraction analysis showed that, at a 580 r/min rotational speed in DPG, the amorphization degree of malachite was 53.12%, whereas that in WIG was 71.40%, indicating that MA led to amorphization and distortion of crystal structures. In addition, in the Fourier transform infrared(FT-IR) spectra of activated malachite, the bands associated with –OH, CO_3^(2-)and metal lattice vibrations of Cu–O and Cu–OH were weakened, and a new H–O–H bending mode and peaks of gaseous CO_2 appeared, indicating that MA decreased the band energy, enhanced dihydroxylation, and increased the chemical reactivity of the malachite.Furthermore, the leaching behavior of copper ore was greatly improved by MA.
