Load forecasting has received crucial research attention to reduce peak load and contribute to the stability of power grid using machine learning or deep learning models.Especially,we need the adequate model to foreca...Load forecasting has received crucial research attention to reduce peak load and contribute to the stability of power grid using machine learning or deep learning models.Especially,we need the adequate model to forecast the maximum load duration based on time-of-use,which is the electricity usage fare policy in order to achieve the goals such as peak load reduction in a power grid.However,the existing single machine learning or deep learning forecasting cannot easily avoid overfitting.Moreover,a majority of the ensemble or hybrid models do not achieve optimal results for forecasting the maximum load duration based on time-of-use.To overcome these limitations,we propose a hybrid deep learning architecture to forecast maximum load duration based on time-of-use.Experimental results indicate that this architecture could achieve the highest average of recall and accuracy(83.43%)compared to benchmark models.To verify the effectiveness of the architecture,another experimental result shows that energy storage system(ESS)scheme in accordance with the forecast results of the proposed model(LSTM-MATO)in the architecture could provide peak load cost savings of 17,535,700 KRW each year comparing with original peak load costs without the method.Therefore,the proposed architecture could be utilized for practical applications such as peak load reduction in the grid.展开更多
The present paper proposes the impact of the air temperature on electricity demand as expected. The annual maximum load is recorded versus the years starting by the year 2009. At present, the graph fitting was applied...The present paper proposes the impact of the air temperature on electricity demand as expected. The annual maximum load is recorded versus the years starting by the year 2009. At present, the graph fitting was applied with some mathematical and computational tools considering the lower values, the higher values and the average values of the annual maximum loads of Kingdom of Bahrain. For the three scenarios, the models are obtained by curve fitting technique. As well, the model of actual loads is obtained finally which has mostly the closest values obtained.展开更多
Soil acidification caused by acid deposition has been significant in some forests in southern China. We present an approach for assessing the current stage maximum allowed load （SML） of acid deposition for terrestri...Soil acidification caused by acid deposition has been significant in some forests in southern China. We present an approach for assessing the current stage maximum allowed load （SML） of acid deposition for terrestrial system in the country. The main idea was that soil base cation exchange as a finite buffer to acidity was included in the soil acidity mass balance calculation at current acidification stage. We calculated the SML for five forests in southern China. The usual critical loads for the same forests were also calculated by the steady state mass balance model for comparison. The results showed that the SML is a more tolerant limit than the critical load for the forests with soils not acidified seriously at current stage. However, the SML become a more stringent limit to acid deposition when the forest soils have acidified seriously to very low base cation saturation. In this case the SML assessment is beneficial for the soils recovering from a serious acidified state. Based on a national scale database, the SML mapping for non-agricultural soil system in China was carried out.展开更多
The present paper proposes the impact of the air temperature on electricity demand as expected. It is clear that the annual maximum load is recorded versus the years starting by the year 2009 up to 2012. At present, t...The present paper proposes the impact of the air temperature on electricity demand as expected. It is clear that the annual maximum load is recorded versus the years starting by the year 2009 up to 2012. At present, the graph fitting technique is applied with some mathematical and computational tools based on the actual values of the years 2009 up to 2012 considering the lower values, the higher values and the average values of the annual maximum loads for Kingdom of Bahrain. For the three scenarios, the models are obtained by curve fitting technique. As well, the model of actual loads is obtained finally which has mostly the closest values obtained.展开更多
To simplify the calculation of the maximum load at which instability occurs for reinforced-concrete pipe columns under eccentric compression, a method based on the transformed cross-sectional area of the column and th...To simplify the calculation of the maximum load at which instability occurs for reinforced-concrete pipe columns under eccentric compression, a method based on the transformed cross-sectional area of the column and the concrete secant modulus of elasticity is proposed, consisting of an iterative process in which a sequence of lateral deflections is at column mid-height. The method assumes the deflected shape of the column as a half cosine wave. Analytical results were compared with experimental values obtained from 16 reinforced-concrete pipe columns. Using deflection at column mid-height recorded during the loading proc-ess, a typical load-deflection curve can be plotted and used to describe column behavior. The experimental results demonstrate that the failure of concrete columns is a process. The starting point is the cracking load point, when cracks are initiated in the concrete of the tensile zone of the critical cross-section of specimens. The maximum load point is the top of the failure process, and then the maximum bending moment occurs. The first point represents instability while the second one corresponds to the strength failure of the columns. The experimental results are close to the analytical values. The method is simple and can be used for stabil-ity analysis of reinforced-concrete pipe columns.展开更多
The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived usi...The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived using the optimally weighted combination theory and the minimum sum of logarithmic squared errors as the objective function.Two typical anchor bolt pull-out engineering cases were selected to compare the performance of the proposed model with those of existing ones.Results showed that the optimal combination model was suitable not only for the slow P-s curve but also for the steep P-s curve.Its accuracy and stable reliability,as well as its prediction capability classification,were better than those of the other prediction models.Therefore,the optimal combination model is an effective processing method for predicting the maximum pull-out load of anchor bolts according to measured data.展开更多
In order to ensure that the photovoltaic(PV) array always works at the global maximum point of power to increase the system's overall efficiency, this paper leads the study on maximum power point tracking(MPPT) in...In order to ensure that the photovoltaic(PV) array always works at the global maximum point of power to increase the system's overall efficiency, this paper leads the study on maximum power point tracking(MPPT) in redundant load mode. A new control system is designed by combining the redundant electronic load module, embedded controller, supportive capacitor and boost circuit. The system adjusts duty ratio of boost circuit dynamically based on the maximum power point parameter provided by redundant load unit in order to realize MPPT. An experiment shows that no matter whether system is under an even illumination or partly perturbed by shadow, this method can find the exact maximum power point.展开更多
Total pollutant load control management for total dissolved nitrogen(TDN) is an urgent task required to gain a good water quality status in Jiaozhou Bay(JZB), China. In this paper, the stoichiometry of multiform TDN o...Total pollutant load control management for total dissolved nitrogen(TDN) is an urgent task required to gain a good water quality status in Jiaozhou Bay(JZB), China. In this paper, the stoichiometry of multiform TDN on land-ocean interactions associated with marine biogeochemical reaction(LOIMBR) was studied by modeling the load-response relationship based on a three-dimensional water quality model of nitrogen in JZB. The results showed that the stoichiometry on LOIMBR of dissolved organic nitrogen(DON), NO3-N and NH4-N was 3:1:1, with one-third of the contribution on the concentration of dissolved inorganic nitrogen(DIN) in JZB for the land-based DON loads to DIN loads. Based on the stoichiometric relationship of nitrogen forms, the total maximum allocated load(TMAL) of equivalent TDN(ETDN) was approximately 5300 t a^-1 in JZB, equivalent to the TMAL of 5700, 5800 and 15600 t a^-1 for NH4-N, NO3-N and DON, respectively. According to the loads of ETDN, there were four outfalls overloaded in JZB in 2015, which lie in the head of the bay. In the four overloaded outfalls, besides NO3-N, NH4-N was the critical nitrogen control form for Moshui River, while DON for Dagu River and Haibo River. The results of numerical experiments further showed that JZB will achieve good water quality after 7 years by implementation of the 'different emission reduction' based on TMAL of ETDN, which is significantly better than 'equal percent removal'.展开更多
AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD ...AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.展开更多
Torpedo anchors have been used in mooring systems for deep-water oil and gas projects owing to their prominent advantages, such as low cost and easy installation. The maximum force of torpedo anchors is crucial not on...Torpedo anchors have been used in mooring systems for deep-water oil and gas projects owing to their prominent advantages, such as low cost and easy installation. The maximum force of torpedo anchors is crucial not only to the safety and stability of vessels and other marine facilities, but also for an economical design. It is necessary to develop reliable formula for fast predicting their maximum inclined force of a torpedo anchor in cohesive beds. In this study, the maximum inclined force of a torpedo anchor vertically embedded in cohesive beds was extensively investigated. 316 sets of inclined pullout laboratory tests were carried out for 9 differently shaped torpedo anchors which were vertically embedded in different cohesive beds. The loading curves were automatically acquisitioned and their characteristics were analyzed. The load angle relative to the horizontal varied from 20° to 90°. A new formula for fast calculating the maximum inclined force of the torpedo anchor vertically embedded in cohesive beds was obtained based on force analysis and a nonlinear regression on the data from the present and other studies. Effect aspects on the tests are discussed and further studies are highlighted.展开更多
High concentrated PV multi-junction solar cells (HCPV) likely present a favorable alternative to achieve low cost of energy. However, multi-junction solar cell has different characteristics which should be settled bef...High concentrated PV multi-junction solar cells (HCPV) likely present a favorable alternative to achieve low cost of energy. However, multi-junction solar cell has different characteristics which should be settled before they can be adapted for large scale energy generation. Peak energy consumption in Kuwait usually occurs in periods of utilizing air conditioning systems which are essentially used in almost all year around in harsh climate like Kuwait. Power consumed at peak times is more costly than power needed to satisfy loads at regular consumption times. The main goal of the present research is to increase HCPV solar cells’ efficiency, to decrease maximum power cost in Kuwait. Multi-junction solar cells performance in weather conditions of Kuwait is investigated employing a single diode equivalent circuit model. The model developed considers the impacts of concentration ratio as well as temperature. Most research in literature review usually neglects shunt resistance of the diode, however this resistance is taken into consideration in current developed theoretical model. To calibrate the present model, current predictions are compared with corresponding measured data provided by multi-junction solar cell manufacturer. The total root mean square errors in the present model predictions are about 1.8%. This means that current developed model of single diode model which takes into account shunt resistance impacts gives precise and reliable data. HCP electrical efficiency is noticed to rise as concentration increases but to a certain concentration value, then it begins to decrease. In addition, utilizing HCPV linked to grid satisfies great decrease in maximum load. Power produced from HCPV modules is utilized to provide energy needs to a family in normal Kuwaiti family home to evaluate HCPV environmental effects. HCPV modules slopes and areas are changed to accomplish peak energy production all over the year. Present results reveal that optimum power production corresponds to HCPV modules directed to south and having latitude of 25°. In addition, employing HCPV modules can avoid approximately 1.55 ton of emitted CO2 per year. In conclusion, current work reveals the advantage impacts of grid connected HCPV in Kuwait weather.展开更多
Deriving some models to estimate the electrical demand for future for the Kingdom of Bahrain is carried out in the present study. The ambient temperature is taken into the account as well as the time factor (Year). Th...Deriving some models to estimate the electrical demand for future for the Kingdom of Bahrain is carried out in the present study. The ambient temperature is taken into the account as well as the time factor (Year). The model was developed in away describing the electric power demand during a summer period. The estimated values of the maximum electrical load is obtained and evaluated on actual peak load data of the Kingdom of Bahrain.展开更多
Critical plane method is one of the most promising approaches to predict the fatigue life when the structure is subjected to the multiaxial loading.The stress-strain status and the critical plane position for smooth s...Critical plane method is one of the most promising approaches to predict the fatigue life when the structure is subjected to the multiaxial loading.The stress-strain status and the critical plane position for smooth specimens are calculated using theoretical approaches when the loading mode is a continuous function.However,because of the existence of stress concentration and the characteristic of multiaxial non-proportion,it is difficult to calculate the stress-strain status and the critical plane position of geometric discontinuity structure by theory method.In this paper,a new numerical simulation method is proposed to determine the critical plane of geometric discontinuity structure under multiaxial loading.Firstly,the strain status of dangerous point is analyzed by finite element method.Secondly,the maximum shear strain amplitude of arbitrary plane is calculated using coordinate transformation principle.Finally,the plane which has the maximum shear strain amplitude is defined as the critical plane.The critical plane positions are analyzed when loading mode and notch parameters are different.Meanwhile,the relationship between notch depth and associated parameters on critical plane as well as that between loading amplitude and associated parameters on critical plane are given quantitatively.展开更多
基金supported by Institute for Information&communications Technology Planning&Evaluation(IITP)funded by the Korea government(MSIT)(No.2019-0-01343,Training Key Talents in Industrial Convergence Security)Research Cluster Project,R20143,by Zayed University Research Office.
文摘Load forecasting has received crucial research attention to reduce peak load and contribute to the stability of power grid using machine learning or deep learning models.Especially,we need the adequate model to forecast the maximum load duration based on time-of-use,which is the electricity usage fare policy in order to achieve the goals such as peak load reduction in a power grid.However,the existing single machine learning or deep learning forecasting cannot easily avoid overfitting.Moreover,a majority of the ensemble or hybrid models do not achieve optimal results for forecasting the maximum load duration based on time-of-use.To overcome these limitations,we propose a hybrid deep learning architecture to forecast maximum load duration based on time-of-use.Experimental results indicate that this architecture could achieve the highest average of recall and accuracy(83.43%)compared to benchmark models.To verify the effectiveness of the architecture,another experimental result shows that energy storage system(ESS)scheme in accordance with the forecast results of the proposed model(LSTM-MATO)in the architecture could provide peak load cost savings of 17,535,700 KRW each year comparing with original peak load costs without the method.Therefore,the proposed architecture could be utilized for practical applications such as peak load reduction in the grid.
文摘The present paper proposes the impact of the air temperature on electricity demand as expected. The annual maximum load is recorded versus the years starting by the year 2009. At present, the graph fitting was applied with some mathematical and computational tools considering the lower values, the higher values and the average values of the annual maximum loads of Kingdom of Bahrain. For the three scenarios, the models are obtained by curve fitting technique. As well, the model of actual loads is obtained finally which has mostly the closest values obtained.
基金supported by Knowledge Innovation Project of The Chinese Academy of Sciences(No.KZCXZ-YW-GJ01)The National Basic Research Program(973)of China(No.2005CB422206)
文摘Soil acidification caused by acid deposition has been significant in some forests in southern China. We present an approach for assessing the current stage maximum allowed load （SML） of acid deposition for terrestrial system in the country. The main idea was that soil base cation exchange as a finite buffer to acidity was included in the soil acidity mass balance calculation at current acidification stage. We calculated the SML for five forests in southern China. The usual critical loads for the same forests were also calculated by the steady state mass balance model for comparison. The results showed that the SML is a more tolerant limit than the critical load for the forests with soils not acidified seriously at current stage. However, the SML become a more stringent limit to acid deposition when the forest soils have acidified seriously to very low base cation saturation. In this case the SML assessment is beneficial for the soils recovering from a serious acidified state. Based on a national scale database, the SML mapping for non-agricultural soil system in China was carried out.
文摘The present paper proposes the impact of the air temperature on electricity demand as expected. It is clear that the annual maximum load is recorded versus the years starting by the year 2009 up to 2012. At present, the graph fitting technique is applied with some mathematical and computational tools based on the actual values of the years 2009 up to 2012 considering the lower values, the higher values and the average values of the annual maximum loads for Kingdom of Bahrain. For the three scenarios, the models are obtained by curve fitting technique. As well, the model of actual loads is obtained finally which has mostly the closest values obtained.
基金Supported by the Chinese Scholarship Council of the Educa-tion Ministry and National Key Basic Research and Devel-opment (973) Program of China (No. 2002CB412709)
文摘To simplify the calculation of the maximum load at which instability occurs for reinforced-concrete pipe columns under eccentric compression, a method based on the transformed cross-sectional area of the column and the concrete secant modulus of elasticity is proposed, consisting of an iterative process in which a sequence of lateral deflections is at column mid-height. The method assumes the deflected shape of the column as a half cosine wave. Analytical results were compared with experimental values obtained from 16 reinforced-concrete pipe columns. Using deflection at column mid-height recorded during the loading proc-ess, a typical load-deflection curve can be plotted and used to describe column behavior. The experimental results demonstrate that the failure of concrete columns is a process. The starting point is the cracking load point, when cracks are initiated in the concrete of the tensile zone of the critical cross-section of specimens. The maximum load point is the top of the failure process, and then the maximum bending moment occurs. The first point represents instability while the second one corresponds to the strength failure of the columns. The experimental results are close to the analytical values. The method is simple and can be used for stabil-ity analysis of reinforced-concrete pipe columns.
基金The National Natural Science Foundation of China(No.51778485).
文摘The mixed model of improved exponential and power function and unequal interval gray GM(1,1)model have poor accuracy in predicting the maximum pull-out load of anchor bolts.An optimal combination model was derived using the optimally weighted combination theory and the minimum sum of logarithmic squared errors as the objective function.Two typical anchor bolt pull-out engineering cases were selected to compare the performance of the proposed model with those of existing ones.Results showed that the optimal combination model was suitable not only for the slow P-s curve but also for the steep P-s curve.Its accuracy and stable reliability,as well as its prediction capability classification,were better than those of the other prediction models.Therefore,the optimal combination model is an effective processing method for predicting the maximum pull-out load of anchor bolts according to measured data.
基金supported by the National Natural Science Foundation of China(61203129,61174038,61473151,51507080)the Fundamental Research Funds for the Central Universities(30915011104,30920130121010,30920140112005)
基金the National Natural Science Foundation of China(No.61107064)the Leading Academic Discipline Project of Communication and Information System(No.XXKZD1605)
文摘In order to ensure that the photovoltaic(PV) array always works at the global maximum point of power to increase the system's overall efficiency, this paper leads the study on maximum power point tracking(MPPT) in redundant load mode. A new control system is designed by combining the redundant electronic load module, embedded controller, supportive capacitor and boost circuit. The system adjusts duty ratio of boost circuit dynamically based on the maximum power point parameter provided by redundant load unit in order to realize MPPT. An experiment shows that no matter whether system is under an even illumination or partly perturbed by shadow, this method can find the exact maximum power point.
基金supported by the National Natural Science Foundation of China (No.41676062)the NSFC-Shandong Joint Fund for Marine Ecology and Environmental Sciences (No.U1606404)+1 种基金the Key R&D Program of Shandong (No.2018GHY115005)the NSFC-Shandong Joint Fund (No.U1706215)。
文摘Total pollutant load control management for total dissolved nitrogen(TDN) is an urgent task required to gain a good water quality status in Jiaozhou Bay(JZB), China. In this paper, the stoichiometry of multiform TDN on land-ocean interactions associated with marine biogeochemical reaction(LOIMBR) was studied by modeling the load-response relationship based on a three-dimensional water quality model of nitrogen in JZB. The results showed that the stoichiometry on LOIMBR of dissolved organic nitrogen(DON), NO3-N and NH4-N was 3:1:1, with one-third of the contribution on the concentration of dissolved inorganic nitrogen(DIN) in JZB for the land-based DON loads to DIN loads. Based on the stoichiometric relationship of nitrogen forms, the total maximum allocated load(TMAL) of equivalent TDN(ETDN) was approximately 5300 t a^-1 in JZB, equivalent to the TMAL of 5700, 5800 and 15600 t a^-1 for NH4-N, NO3-N and DON, respectively. According to the loads of ETDN, there were four outfalls overloaded in JZB in 2015, which lie in the head of the bay. In the four overloaded outfalls, besides NO3-N, NH4-N was the critical nitrogen control form for Moshui River, while DON for Dagu River and Haibo River. The results of numerical experiments further showed that JZB will achieve good water quality after 7 years by implementation of the 'different emission reduction' based on TMAL of ETDN, which is significantly better than 'equal percent removal'.
文摘AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.
基金financially supported by the Ministry of Education of China(Grant No.6141A02022337)
文摘Torpedo anchors have been used in mooring systems for deep-water oil and gas projects owing to their prominent advantages, such as low cost and easy installation. The maximum force of torpedo anchors is crucial not only to the safety and stability of vessels and other marine facilities, but also for an economical design. It is necessary to develop reliable formula for fast predicting their maximum inclined force of a torpedo anchor in cohesive beds. In this study, the maximum inclined force of a torpedo anchor vertically embedded in cohesive beds was extensively investigated. 316 sets of inclined pullout laboratory tests were carried out for 9 differently shaped torpedo anchors which were vertically embedded in different cohesive beds. The loading curves were automatically acquisitioned and their characteristics were analyzed. The load angle relative to the horizontal varied from 20° to 90°. A new formula for fast calculating the maximum inclined force of the torpedo anchor vertically embedded in cohesive beds was obtained based on force analysis and a nonlinear regression on the data from the present and other studies. Effect aspects on the tests are discussed and further studies are highlighted.
文摘High concentrated PV multi-junction solar cells (HCPV) likely present a favorable alternative to achieve low cost of energy. However, multi-junction solar cell has different characteristics which should be settled before they can be adapted for large scale energy generation. Peak energy consumption in Kuwait usually occurs in periods of utilizing air conditioning systems which are essentially used in almost all year around in harsh climate like Kuwait. Power consumed at peak times is more costly than power needed to satisfy loads at regular consumption times. The main goal of the present research is to increase HCPV solar cells’ efficiency, to decrease maximum power cost in Kuwait. Multi-junction solar cells performance in weather conditions of Kuwait is investigated employing a single diode equivalent circuit model. The model developed considers the impacts of concentration ratio as well as temperature. Most research in literature review usually neglects shunt resistance of the diode, however this resistance is taken into consideration in current developed theoretical model. To calibrate the present model, current predictions are compared with corresponding measured data provided by multi-junction solar cell manufacturer. The total root mean square errors in the present model predictions are about 1.8%. This means that current developed model of single diode model which takes into account shunt resistance impacts gives precise and reliable data. HCP electrical efficiency is noticed to rise as concentration increases but to a certain concentration value, then it begins to decrease. In addition, utilizing HCPV linked to grid satisfies great decrease in maximum load. Power produced from HCPV modules is utilized to provide energy needs to a family in normal Kuwaiti family home to evaluate HCPV environmental effects. HCPV modules slopes and areas are changed to accomplish peak energy production all over the year. Present results reveal that optimum power production corresponds to HCPV modules directed to south and having latitude of 25°. In addition, employing HCPV modules can avoid approximately 1.55 ton of emitted CO2 per year. In conclusion, current work reveals the advantage impacts of grid connected HCPV in Kuwait weather.
文摘Deriving some models to estimate the electrical demand for future for the Kingdom of Bahrain is carried out in the present study. The ambient temperature is taken into the account as well as the time factor (Year). The model was developed in away describing the electric power demand during a summer period. The estimated values of the maximum electrical load is obtained and evaluated on actual peak load data of the Kingdom of Bahrain.
基金the National Natural Science Foundation of China(Nos.51778273 and 51605212)the Universities and Colleges Innovation Ability Improvement Project of Gansu(No.2019A-225)
文摘Critical plane method is one of the most promising approaches to predict the fatigue life when the structure is subjected to the multiaxial loading.The stress-strain status and the critical plane position for smooth specimens are calculated using theoretical approaches when the loading mode is a continuous function.However,because of the existence of stress concentration and the characteristic of multiaxial non-proportion,it is difficult to calculate the stress-strain status and the critical plane position of geometric discontinuity structure by theory method.In this paper,a new numerical simulation method is proposed to determine the critical plane of geometric discontinuity structure under multiaxial loading.Firstly,the strain status of dangerous point is analyzed by finite element method.Secondly,the maximum shear strain amplitude of arbitrary plane is calculated using coordinate transformation principle.Finally,the plane which has the maximum shear strain amplitude is defined as the critical plane.The critical plane positions are analyzed when loading mode and notch parameters are different.Meanwhile,the relationship between notch depth and associated parameters on critical plane as well as that between loading amplitude and associated parameters on critical plane are given quantitatively.
