This paper addresses a master-slave synchro- nization strategy for complex dynamic systems based on feedback control. This strategy is applied to 3-DOF pla- nar manipulators in order to obtain synchronization in such ...This paper addresses a master-slave synchro- nization strategy for complex dynamic systems based on feedback control. This strategy is applied to 3-DOF pla- nar manipulators in order to obtain synchronization in such complicated as chaotic motions of end-effectors. A chaotic curve is selected from Duffing equation as the trajectory of master end-effector and a piecewise approximation method is proposed to accurately represent this chaotic trajectory of end-effectors. The dynamical equations of master-slave manipulators with synchronization controller are derived, and the Lyapunov stability theory is used to determine the stability of this controlled synchronization system. In numer- ical experiments, the synchronous motions of end-effectors as well as three joint angles and torques of master-slave manipulators are studied under the control of the proposed synchronization strategy. It is found that the positive gain matrix affects the implementation of synchronization con- trol strategy. This synchronization control strategy proves the synchronization＇s feasibility and controllability for com- plicated motions generated by master-slave manipulators.展开更多
In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardwar...In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardware construction, is introduced. Spinning experiments show that the system achieves satisfactory result. This system can solve the diftkultles of mechatronical fusion between domestic hollow splndk fancy yarn spuming muchine and its microcomputer control technology.展开更多
Aiming at the weaknesses of LON bus, combining the coexistence of fieldbus and DCS (Distribu ted Control Systems) in control networks, the authors introduce a hierarchical hybrid control network design based on LON an...Aiming at the weaknesses of LON bus, combining the coexistence of fieldbus and DCS (Distribu ted Control Systems) in control networks, the authors introduce a hierarchical hybrid control network design based on LON and master slave RS 422/485 protocol. This design adopts LON as the trunk, master slave RS 422/485 control networks are connected to LON as special subnets by dedicated gateways. It is an implementation method for isomerous control network integration. Data management is ranked according to real time requirements for different network data. The core components, such as control network nodes, router and gateway, are detailed in the paper. The design utilizes both communication advantage of LonWorks technology and the more powerful control ability of universal MCUs or PLCs, thus it greatly increases system response speed and performance cost ratio.展开更多
A 3 DOF master-slave telerobot system is established for study on force telepresence technology. A force feedback and position control scheme is adopted in the bilateral force response control system,and force fidelit...A 3 DOF master-slave telerobot system is established for study on force telepresence technology. A force feedback and position control scheme is adopted in the bilateral force response control system,and force fidelity and controllability experiments demonstrate feasibility of the con-trol system.展开更多
Master robots are integral components of teleoperated robot-assisted minimally invasive surgery systems.Among them,parallel mechanism-based 6-degree-of-freedom master robots are distinguished by low inertia and high-f...Master robots are integral components of teleoperated robot-assisted minimally invasive surgery systems.Among them,parallel mechanism-based 6-degree-of-freedom master robots are distinguished by low inertia and high-force feedback.However,complex kinematics and singularities are the main barriers limiting its usage.This study converts the Hexa-type 6-RUS mechanism into a master robot to construct master-slave teleoperation system.The clinical background is briefly introduced and a representative surgical robot is employed to analyze the master-slave mapping relationship.The inverse/forward kinematics,the Jacobian matrix,and the translation and orientation workspace are derived as the bases of master robot’s application.The architecture parameters are optimized by the global transmission index to achieve better motion/force transmissibility.Based on the optimal result,the prototype and the master-slave control loop are constructed.Finally,the corresponding master-slave teleoperation experiment and model experiment demonstrate that the proposed master robot satisfies the basic need for medical application.展开更多
在受端交流侧发生故障时,现有依赖耗能装置的基于模块化多电平换流器的多端柔性直流(modular multilevel converter based multi-terminal direct current,MMC-MTDC)输电系统,其盈余功率处理方案存在经济性差和能量浪费等问题。为充分发...在受端交流侧发生故障时,现有依赖耗能装置的基于模块化多电平换流器的多端柔性直流(modular multilevel converter based multi-terminal direct current,MMC-MTDC)输电系统,其盈余功率处理方案存在经济性差和能量浪费等问题。为充分发挥MMC-MTDC系统自有盈余功率消纳能力,减少对耗能装置的依赖,文中提出一种基于主从能量控制的多站极间交互消纳策略。首先,建立相应的MMC-MTDC控制模型,并对其通过能量控制实现盈余功率消纳的可行性进行分析。随后,引入MMC三维度模型,实现换流站各极能量解耦控制,并通过构建的MMC-MTDC系统简化模型,对各类型换流站开展主动能量控制设计。在此基础上,类比主从控制思想,构建适用于不同受端站极交流故障及两类盈余功率情况的主从能量时序控制逻辑,以实现各站极之间的能量裕度协调利用。最后,在PSCAD/EMTDC平台搭建MMC-MTDC系统仿真模型进行实验验证。仿真结果表明,所提控制策略能够在不依赖耗能装置的前提下,有效协调多站极之间的能量控制,适应多种盈余功率故障情况,成功实现故障穿越。展开更多
Aiming at realizing monitoring of tyre bladder vulcanizer operating process, a master-slave control system was composed of configuration software and Mitsubishi FX2N series PLC. PLC was taken as slave machine to opera...Aiming at realizing monitoring of tyre bladder vulcanizer operating process, a master-slave control system was composed of configuration software and Mitsubishi FX2N series PLC. PLC was taken as slave machine to operating process of tyre bladder vulcanizer. Configuration software monitored the running state of the tyre bladder vulcanizer realtimely, showed data in real time and recorded data in upper machine. The test results indicate that the system with friendly interface can be operated conveniently for automation management. The system can increase the tyre bladder quality successfully for production requirement.展开更多
Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Fi...Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.展开更多
The difficult problem of automatically welding nipples onto the header is first analyzed in this paper, and then the overall structure and operating principle of the robot working unit are introduced. The robot and th...The difficult problem of automatically welding nipples onto the header is first analyzed in this paper, and then the overall structure and operating principle of the robot working unit are introduced. The robot and the measuring device are located by employing the traveling lorry, and this unit enables the robot to adjust the tracks according to the errors received from the measuring device, and then the nipples are welded properly. This paper emphases on the development of the master-slave control system, in which the prograrmmable Logic Controller (PLC) is used as the master computer.展开更多
基金supported by the Key Project of Chinese Ministry of Education(108037)the National Natural Science Foundation of China(10402008 and 50535010)
文摘This paper addresses a master-slave synchro- nization strategy for complex dynamic systems based on feedback control. This strategy is applied to 3-DOF pla- nar manipulators in order to obtain synchronization in such complicated as chaotic motions of end-effectors. A chaotic curve is selected from Duffing equation as the trajectory of master end-effector and a piecewise approximation method is proposed to accurately represent this chaotic trajectory of end-effectors. The dynamical equations of master-slave manipulators with synchronization controller are derived, and the Lyapunov stability theory is used to determine the stability of this controlled synchronization system. In numer- ical experiments, the synchronous motions of end-effectors as well as three joint angles and torques of master-slave manipulators are studied under the control of the proposed synchronization strategy. It is found that the positive gain matrix affects the implementation of synchronization con- trol strategy. This synchronization control strategy proves the synchronization＇s feasibility and controllability for com- plicated motions generated by master-slave manipulators.
文摘In this paper, a successfully studied and developed master - slave muld - microcomputers control system based on PC - BUS for hollow spindle fancy yarn spinning machine, mainly Its overall scheme, software and hardware construction, is introduced. Spinning experiments show that the system achieves satisfactory result. This system can solve the diftkultles of mechatronical fusion between domestic hollow splndk fancy yarn spuming muchine and its microcomputer control technology.
文摘Aiming at the weaknesses of LON bus, combining the coexistence of fieldbus and DCS (Distribu ted Control Systems) in control networks, the authors introduce a hierarchical hybrid control network design based on LON and master slave RS 422/485 protocol. This design adopts LON as the trunk, master slave RS 422/485 control networks are connected to LON as special subnets by dedicated gateways. It is an implementation method for isomerous control network integration. Data management is ranked according to real time requirements for different network data. The core components, such as control network nodes, router and gateway, are detailed in the paper. The design utilizes both communication advantage of LonWorks technology and the more powerful control ability of universal MCUs or PLCs, thus it greatly increases system response speed and performance cost ratio.
文摘A 3 DOF master-slave telerobot system is established for study on force telepresence technology. A force feedback and position control scheme is adopted in the bilateral force response control system,and force fidelity and controllability experiments demonstrate feasibility of the con-trol system.
基金the National Natural Science Foundation of China(No.62211540723)the Interdisciplinary Program of Shanghai Jiao Tong University(Nos.YG2023ZD05 and YG2023ZD14)+1 种基金the Quanzhou High-Level Talent Innovation and Entrepreneurship Project(No.2021C003R)the Research Project of Institute of Medical Robotics of Shanghai Jiao Tong University。
文摘Master robots are integral components of teleoperated robot-assisted minimally invasive surgery systems.Among them,parallel mechanism-based 6-degree-of-freedom master robots are distinguished by low inertia and high-force feedback.However,complex kinematics and singularities are the main barriers limiting its usage.This study converts the Hexa-type 6-RUS mechanism into a master robot to construct master-slave teleoperation system.The clinical background is briefly introduced and a representative surgical robot is employed to analyze the master-slave mapping relationship.The inverse/forward kinematics,the Jacobian matrix,and the translation and orientation workspace are derived as the bases of master robot’s application.The architecture parameters are optimized by the global transmission index to achieve better motion/force transmissibility.Based on the optimal result,the prototype and the master-slave control loop are constructed.Finally,the corresponding master-slave teleoperation experiment and model experiment demonstrate that the proposed master robot satisfies the basic need for medical application.
文摘在受端交流侧发生故障时,现有依赖耗能装置的基于模块化多电平换流器的多端柔性直流(modular multilevel converter based multi-terminal direct current,MMC-MTDC)输电系统,其盈余功率处理方案存在经济性差和能量浪费等问题。为充分发挥MMC-MTDC系统自有盈余功率消纳能力,减少对耗能装置的依赖,文中提出一种基于主从能量控制的多站极间交互消纳策略。首先,建立相应的MMC-MTDC控制模型,并对其通过能量控制实现盈余功率消纳的可行性进行分析。随后,引入MMC三维度模型,实现换流站各极能量解耦控制,并通过构建的MMC-MTDC系统简化模型,对各类型换流站开展主动能量控制设计。在此基础上,类比主从控制思想,构建适用于不同受端站极交流故障及两类盈余功率情况的主从能量时序控制逻辑,以实现各站极之间的能量裕度协调利用。最后,在PSCAD/EMTDC平台搭建MMC-MTDC系统仿真模型进行实验验证。仿真结果表明,所提控制策略能够在不依赖耗能装置的前提下,有效协调多站极之间的能量控制,适应多种盈余功率故障情况,成功实现故障穿越。
文摘Aiming at realizing monitoring of tyre bladder vulcanizer operating process, a master-slave control system was composed of configuration software and Mitsubishi FX2N series PLC. PLC was taken as slave machine to operating process of tyre bladder vulcanizer. Configuration software monitored the running state of the tyre bladder vulcanizer realtimely, showed data in real time and recorded data in upper machine. The test results indicate that the system with friendly interface can be operated conveniently for automation management. The system can increase the tyre bladder quality successfully for production requirement.
文摘Targeting at the high expense and inflexibility to realize VMEbus bridge controller by professional Integrated Circuit (IC), this paper presents a scheme of adopting CPLD/FPGA (Complicated Programmable Logic Device/Field Programmable Gate Array) to design bridge controller between VMEbus and local bus. SHARC DSP (Digital Signal Processor) bus is an example. It has functions of nearly entire master/slave interface of VMEbus, and can act as DMA (Direct Memory Access) controller and perform block transfer in DMA or master processor initiative way without length limit. External circuit of the design is very simple. In comparison with special ICs, it has high performance to price ratio and can be easily applied to local buses of other processors with quite a little modification.
文摘The difficult problem of automatically welding nipples onto the header is first analyzed in this paper, and then the overall structure and operating principle of the robot working unit are introduced. The robot and the measuring device are located by employing the traveling lorry, and this unit enables the robot to adjust the tracks according to the errors received from the measuring device, and then the nipples are welded properly. This paper emphases on the development of the master-slave control system, in which the prograrmmable Logic Controller (PLC) is used as the master computer.
