The burgeoning growth in electric vehicles and portable energy storage systems necessitates advances in the energy density and cost-effectiveness of lithium-ion batteries(LIBs),areas where lithium-rich manganese-based...The burgeoning growth in electric vehicles and portable energy storage systems necessitates advances in the energy density and cost-effectiveness of lithium-ion batteries(LIBs),areas where lithium-rich manganese-based oxide(LLO)materials naturally stand out.Despite their inherent advantages,these materials encounter significant practical hurdles,including low initial Coulombic efficiency(ICE),diminished cycle/rate performance,and voltage fading during cycling,hindering their widespread adoption.In response,we introduce an ionic-electronic dual-conductive(IEDC)surface control strategy that integrates an electronically conductive graphene framework with an ionically conductive heteroepitaxial spinel Li_(4)Mn_(5)O_(12)layer.Prolonged electrochemical and structural analyses demonstrate that this IEDC heterostructure effectively minimizes polarization,mitigates structural distortion,and enhances electronic/ionic diffusion.Density functional theory calculations highlight an extensive Li^(+)percolation network and lower Li^(+)migration energies at the layered-spinel interface.The designed LLO cathode with IEDC interface engineering(LMOSG)exhibits improved ICE(82.9%at 0.1 C),elevated initial discharge capacity(296.7 mAh g^(-1)at 0.1 C),exceptional rate capability(176.5 mAh g^(-1)at 5 C),and outstanding cycle stability(73.7%retention at 5 C after 500 cycles).These findings and the novel dual-conductive surface architecture design offer promising directions for advancing highperformance electrode materials.展开更多
Potassium-ion batteries(PIBs)were recognized for their natural abunda nce,high theoretical output voltage,and the availability of commercialized graphite anodes.However,the development of highperformance manganese-bas...Potassium-ion batteries(PIBs)were recognized for their natural abunda nce,high theoretical output voltage,and the availability of commercialized graphite anodes.However,the development of highperformance manganese-based layered oxide cathodes-a leading candidate for PIB systems-has been fundamentally constrained by irreversible phase transitions(PT)during the cycling process,manifesting as severe structural degradation and capacity fading.This review presents a transformative paradigm integrating machine learning(ML)with multiscale characterization to analyse the complex phase transition mechanisms in Mn-based cathodes.Through systematic ML-driven interrogation of structure-property relationships,we establish quantitative descriptors for phase stability and develop predictive models for transition dynamics.Furthermore,we highlight recent breakthroughs in cross-disciplinary approaches,enabling the rational design of PT-mitigated cathode architectures.By consolidating these insights into a unified knowledge framework,this work provides strategic guidelines for developing structurally robust Mn-based cathodes and outlines future research directions for next-generation PIB systems.展开更多
Manganese(Mn)-based materials are considered as one of the most promising cathodes in zinc-ion batteries(ZIBs) for large-scale energy storage applications because of their multivalence, cost-effectiveness,natural avai...Manganese(Mn)-based materials are considered as one of the most promising cathodes in zinc-ion batteries(ZIBs) for large-scale energy storage applications because of their multivalence, cost-effectiveness,natural availability, low toxicity, satisfactory capacity, and high operating voltage. In this review, the research status and related interface engineering strategies of Mn-based oxide cathode electrode materials for ZIB in recent years are summarized. Specifically, the review will focus on three types of interface engineering strategies, including interface reconstruction via cathode, interface reconstruction electrolyte, and protection via artificial cathode-electrolyte interphase(CEI) layer, within the context of their evolution of interface layer and corresponding electrochemical performance. A series of experimental variables, such as crystal structure, electrochemical reaction mechanism, and the necessary connection for the formation and evolution of interface layer, will be carefully analyzed by combining various advanced characterization techniques and theoretical calculations. Finally, suggestions and strategies are provided for reasonably designing the cathode-electrolyte interface to realize the excellent performance of Mn-based oxide zinc-based batteries.展开更多
The extensive use of diesel engines has led to significant emissions of pollutants,especially soot particles,which pose serious risks to both the environment and human health.At present,developing catalysts with low–...The extensive use of diesel engines has led to significant emissions of pollutants,especially soot particles,which pose serious risks to both the environment and human health.At present,developing catalysts with low–temperature activity,low cost,and high stability remains the core challenge in eliminating soot from diesel engine exhaust.This paper first reviews the mechanisms of soot catalytic oxidation.Based on these mechanisms,the current design directions for soot catalysts are summarized and discussed.On the one hand,the effects of modification methods such as doping,loading,and solid solution on the performance of manganese-based catalysts are reviewed from the perspective of intrinsic activity.On the other hand,the research progress on manganese-based catalysts with specific morphological structures for soot oxidation is explored.Following the identification of design strategies,the commonly used preparation methods to achieve these designs are also outlined.Finally,the paper highlights the challenges associated with manganese-based catalysts in soot catalysis and discusses future research and development directions.展开更多
The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating so...The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.展开更多
Li-ion batteries(LIBs)with excellent cycling stability and high-energy densities have already occupied the commercial rechargeable battery market.Unfortunately,the high cost and intrinsic insecurity induced by organic...Li-ion batteries(LIBs)with excellent cycling stability and high-energy densities have already occupied the commercial rechargeable battery market.Unfortunately,the high cost and intrinsic insecurity induced by organic electrolyte severely hinder their applications in large-scale energy storage.In contrast,aqueous Zn-ion batteries(ZIBs)are being developed as an ideal candidate because of their cheapness and high security.Benefiting from high operating voltage and acceptable specific capacity,recently,manganese-based oxides with different various crystal structures have been extensively studied as cathode materials for aqueous ZIBs.This review presents research progress of manganese-based cathodes in aqueous ZIBs,including various manganese-based oxides and their zinc storage mechanisms.In addition,we also discuss some optimization strategies that aim at improving the electrochemical performance of manganese-based cathodes,and the design of flexible aqueous ZIBs based on manganese-based cathodes(MZIBs).Finally,this review summarizes some valuable research directions,which will promote the further development of aqueous MZIBs.展开更多
The growing need for higher energy density in rechargeable batteries necessitates the exploration of cathode materials with enhanced specific energy for lithium-ion batteries.Due to their exceptional cost-effectivenes...The growing need for higher energy density in rechargeable batteries necessitates the exploration of cathode materials with enhanced specific energy for lithium-ion batteries.Due to their exceptional cost-effectiveness and specific capacity,lithium-rich manganese-based cathode materials(LRMs)obtain in-creasing attention in the pursuit of enhancing energy density and reducing costs.The implementation has faced obstacles in various applications due to substantial capacity and voltage degradation,insufficient safety performance,and restricted rate capability during cycling.These issues arise from the migration of transition metal,the release of oxygen,and structural transformation.In this review,we provide an integrated survey of the structure,lithium storage mechanism,challenges,and origins of LRMs,as well as recent advancements in various coating strategies.Particularly,the significance of optimizing the design of the cathode electrolyte interphase was emphasized to enhance electrode performance.Furthermore,future perspective was also addressed alongside in-situ measurements,advanced synthesis techniques,and the application of machine learning to overcome encountered challenges in LRMs.展开更多
With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysi...With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysis of PET to DMT is achieved over Cu-Mg-Al oxide catalyst.Next,terephthalic acid(TPA)is prepared by DMT hydrolysis.It is found that hydrolysis of DMT to TPA can be promoted by introducing trace amount of water in this catalyst system.CuO-MgO-4.5Al_2O_(3)catalyst demonstrates the excellent catalytic performance for the depolymerization of PET with high conversion rate and TPA yield(100%and 99.5%,respectively)after reaction at 160℃for 6 h,which provides a new idea for the depolymerization of PET.展开更多
Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+d...Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.展开更多
In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic ac...In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.展开更多
The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the ...The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.展开更多
Nitric oxide （NO） deep oxidation to dinitrogen pentoxide （N2O5） by ozone together with wet scrub-bing has become a promising technology for nitrogen-oxide （NOx） removal in industrial boilers. Catalysts wer...Nitric oxide （NO） deep oxidation to dinitrogen pentoxide （N2O5） by ozone together with wet scrub-bing has become a promising technology for nitrogen-oxide （NOx） removal in industrial boilers. Catalysts were introduced to enhance the N2O5 formation rate with less ozone injection and leakage. A series of monometallic catalysts （manganese, cobalt, cerium, iron, copper, and chromium） as pre-pared by the sol-gel method were tested. The manganese oxides achieved an almost 80% conver-sion efficiency at an ozone （O3）/NO molar ratio of 2.0 in 0.12 s. The crystalline structure and porous parameters were determined. The thermodynamic reaction threshold of NO conversion to N2O5 is oxidation with an O3/NO molar ratio of 1.5. Spherical alumina was selected as the support to achieve the threshold, which was believed to improve the catalytic activity by increasing the surface area and the gas-solid contact time. Based on the manganese oxides, cerium, iron, chromium, cop-per, and cobalt were introduced as promoters. Cerium and iron improved the deep-oxidation effi-ciency compared with manganese/spherical alumina, with less than 50 mg/m3 of outlet NO ＋ nitro-gen oxide, and less than 25 mg/m3 of residual ozone at an O3/NO molar ratio of 1.5. The other three metal oxides inhibited catalytic activity. X-ray diffraction, nitrogen adsorption, hydrogen tempera-ture-programmed reduction, and X-ray photoelectron spectroscopy results indicate that the cata-lytic activity is affected by the synergistic action of NOx oxidation and ozone decomposition.展开更多
Bisphenol A(BPA)is a pervasive endocrine disruptor that enters the environment through anthropogenic activities,posing significant risks to ecosystems and human health.Advanced oxidation processes(AOPs)are promising m...Bisphenol A(BPA)is a pervasive endocrine disruptor that enters the environment through anthropogenic activities,posing significant risks to ecosystems and human health.Advanced oxidation processes(AOPs)are promising methods for the removal of organic microcontaminants in the environment.Biogenic manganese oxides(BMO)are reported as catalysts due to their transitionmetal nature,and are also readily generated bymanganeseoxidizing microorganisms in the natural environment,and therefore their roles and effects in AOPs-based environmental remediation should be investigated.However,biogenic ironmanganese oxides(BFMO)are actually generated rather than BMO due to the coexistence of ferrous ionswhich can be oxidized to iron oxides.Therefore,this study produced BFMO originating from a highly efficientmanganese-oxidizing fungus Cladosporium sp.XM01 and chose peroxymonosulfate(PMS)as a typical oxidant for the degradation of bisphenol A(BPA),a model organic micropollutant.Characterization results indicate that the formed BFMO was amorphouswith a lowcrystallinity.The BFMO/PMS system achieved a high degradation performance that 85%BPA was rapidly degraded within 60min,and therefore the contribution of BFMO cannot be ignored during PMS-based environmental remediation.Different from the findings of previous studies(mostly radicals and singlet oxygen),the degradationmechanism was first proven as a 100%electron-transfer pathway mediated by high-valence Mn under acidic conditions provided by PMS.The findings of this study provide new insights into the degradation mechanisms of pollutants using biogenic metal oxides in PMS activation and the contribution of their coexistence in AOPs-based environmental remediation.展开更多
A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performa...A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performance and corresponding structural feature was comprehensively evaluated by XPS,in situ DRIFTS,BET,XRD,SEM and H_(2)-TPR.Meanwhile,10%Gd0.25Ce0.75/MPB exhibited excellent performance,favorable SO_(2) and moisture toleration over a broad temperature range from 160 to 320℃,where it achieved 96.8%removal efficiency with 90.5%selectivity at 200℃.The single or united effects of O_(2),SO_(2),H_(2)O on HCHO abatement over 10%Gd_(0.25)Ce_(0.75)/MPB were tested,and the findings demonstrated that the suppressive effects of SO_(2) and H_(2)O outweighed the promoting influence of O_(2) within a specific range.Gd and Ce co-modified MPB revealed superior HCHO removal capability in contrast to that of Gd or Ce severally modified MPB,ascribing to the synergistic effect of GdO_(x) and CeO_(x) and benefitting from the augmentation of surface area and total pore volume,the aggrandizement of surface active oxygen species,the promotion of redox ability and the inhibition crystallization of CeO_(x).According to in situ DRIFTS,a series of intermediates including formate species and dioxymethylene(DOM)were produced,which would eventually decompose into H_(2)O and CO_(2).In addition,the mass transfer and diffusion of the reactants along with the accessibility of the catalytic sites were enlarged by the hierarchical porous structure of the support,which were also answerable for its distinguished catalytic performance.Furthermore,10%Gd0.25Ce0.75/MPB possessed remarkable potential for industrial applications.展开更多
The Kitaev honeycomb model has received significant attention due to its exactly solvable quantum spin liquid ground states and fractionalized excitations.Layered cobalt oxides have been considered as a promising plat...The Kitaev honeycomb model has received significant attention due to its exactly solvable quantum spin liquid ground states and fractionalized excitations.Layered cobalt oxides have been considered as a promising platform for realizing this model.However,in contrast to the conventional wisdom regarding the single-q zigzag magnetic order inferred from previous studies of the candidate materials Na_(2)IrO_(3) and α-RuCl_(3),recent experiments on two representative honeycomb cobalt oxides,hexagonal Na_(2)Co_(2)TeO_(6) and monoclinic Na_(3)Co_(2)SbO_(6),have uncovered evidence for more complex multi-q zigzag order variants.This review surveys the experimental strategies used to distinguish between single-and multi-q orders,along with the crystallographic symmetries of cobalt oxides,in comparison with previously studied systems.The general formation mechanism of multi-q order is also briefly discussed.The goal is to provide a solid ground for examining the relevance of multi-q order in honeycomb cobalt oxides and discuss its implications for the microscopic model of these intriguing quantum magnets.展开更多
The use of metal oxides has been extensively documented in the literature and applied in a variety of contexts,including but not limited to energy storage,chemical sensors,and biomedical applications.One of the most s...The use of metal oxides has been extensively documented in the literature and applied in a variety of contexts,including but not limited to energy storage,chemical sensors,and biomedical applications.One of the most significant applications of metal oxides is heterogeneous catalysis,which represents a pivotal technology in industrial production on a global scale.Catalysts serve as the primary enabling agents for chemical reactions,and among the plethora of catalysts,metal oxides including magnesium oxide(MgO),ceria(CeO_(2))and titania(TiO_(2)),have been identified to be particularly effective in catalyzing a variety of reactions[1].Theoretical calculations based on density functional theory(DFT)and a multitude of other quantum chemistry methods have proven invaluable in elucidating the mechanisms of metal-oxide-catalyzed reactions,thereby facilitating the design of high-performance catalysts[2].展开更多
In this study,a string of Cr-Mnco-modified activated coke catalysts(XCryMn1-y/AC)were prepared to investigate toluene and Hg^(0) removal performance.Multifarious characterizations including XRD,TEM,SEM,in situ DRIFTS,...In this study,a string of Cr-Mnco-modified activated coke catalysts(XCryMn1-y/AC)were prepared to investigate toluene and Hg^(0) removal performance.Multifarious characterizations including XRD,TEM,SEM,in situ DRIFTS,BET,XPS and H_(2)-TPR showed that 4%Cr0.5Mn0.5/AC had excellent physicochemical properties and exhibited the best toluene and Hg^(0) removal efficiency at 200℃.By varying the experimental gas components and conditions,it was found that too large weight hourly space velocity would reduce the removal efficiency of toluene and Hg^(0).Although O_(2) promoted the abatement of toluene and Hg^(0),the inhibitory role of H_(2)O and SO_(2) offset the promoting effect of O_(2) to some extent.Toluene significantly inhibited Hg^(0) removal,resulting from that toluene was present at concentrations orders of magnitude greater than mercury’s or the catalyst was more prone to adsorb toluene,while Hg^(0) almost exerted non-existent influence on toluene elimination.The mechanistic analysis showed that the forms of toluene and Hg^(0) removal included both adsorption and oxidation,where the high-valent metal cations and oxygen vacancy clusters promoted the redox cycle of Cr^(3+)+Mn^(3+)/Mn^(4+)+Cr^(6+)+Mn^(2+),which facilitated the conversion and replenishment of reactive oxygen species in the oxidation process,and even the CrMn_(1.5)O_(4) spinel structure could provide a larger catalytic interface,thus enhancing the adsorption/oxidation of toluene and Hg^(0).Therefore,its excellent physicochemical properties make it a costeffective potential industrial catalyst with outstanding synergistic toluene and Hg^(0) removal performance and preeminent resistance to H_(2)O and SO_(2).展开更多
Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and re...Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and recovery.Therefore,the membrane fixation of catalyst is an important step to realize the actual application of Fenton-like catalysts.In this work,an efficient catalyst was developed with Co-N_(x)configuration facilely reconstructed on the surface of Co_(3)O_(4)(Co-N_(x)/Co_(3)O_(4)),which exhibited superior catalytic activity.We further fixed the highly efficient Co-N_(x)/Co_(3)O_(4)onto three kinds of organic membranes and one kind of inorganic ceramic membrane installing with the residual PMS treatment device to investigate its catalytic stability and sustainability.Results indicated that the inorganic ceramic membrane(CM)can achieve high water flux of 710 L m-2h-1,and the similar water flux can be achieved by Co-N_(x)/Co_(3)O_(4)/CM even without the pressure extraction.We also employed the Co-N_(x)/Co_(3)O_(4)/CM system to the wastewater secondary effluent,and the pollutant in complicated secondary effluent could be highly removed by the Co-N_(x)/Co_(3)O_(4)/CM system.This paper provides a new point of view for the application of metal-based catalysts with M-N_(x)coordination in catalytic reaction device.展开更多
A_(2)B_(2)O_(7)high-entropy oxides are ceramic materials characterized by diverse compositions,strong structural inclusivity,and a broad range of potential applications.These materials hold significant value in fields...A_(2)B_(2)O_(7)high-entropy oxides are ceramic materials characterized by diverse compositions,strong structural inclusivity,and a broad range of potential applications.These materials hold significant value in fields such as thermal barrier coatings,energy storage,dielectric materials,and transparent ceramics.However,there are limited reports on the dielectric properties of A_(2)B_(2)O_(7)high-entropy oxides.Consequently,further investigation is required to understand the polarization mechanisms in high-entropy ceramics and analyze the formation of oxygen vacancies and their influence.In the present study,La_(2)[(TiZrSnHfGe)_((1-2x)5)(NbGa)_(x)]_(2)O_(7)(x=0.129,0.143,0.157,0.171)(LTZSHGNGO)ceramics were synthesized successfully using a conventional solidstate reaction method.Compared withLa_(2)(TiZrSnHfGe)_(2)O_(7)ceramics,LTZSHGNGO demonstrated a nearly 6.7-fold increase in dielectric constant and a 33%reduction in dielectric loss.The incorporation of Nb/Ga enhanced the high-temperature dielectric properties and improved dielectric stability.The exceptional dielectric performance is primarily attributed to the synergistic highentropy effect,while Nb/Ga doping increased the number of oxygen vacancies and generated more defect dipole clusters[Ti^(4+)·e-V_(O)^(**)-Ti^(4+)·e].This study provides novel insights into the dielectric properties of LTZSHGNGO high-entropy ceramics and offers a novel approach to understanding the performance of A_(2)B_(2)O_(7)ceramics.展开更多
The vibrational resolved spectra of MO_(2)^(-)/MO_(2)(M=Ti,Zr,and Hf)are reported by using photoelectron imaging and theoretical calculations.The results indicate that all the ground states of anionic and neutral MO_(...The vibrational resolved spectra of MO_(2)^(-)/MO_(2)(M=Ti,Zr,and Hf)are reported by using photoelectron imaging and theoretical calculations.The results indicate that all the ground states of anionic and neutral MO_(2)(M=Ti,Zr,and Hf)compounds are formed in bent insertion structures.The observed ground-state adiabatic detachment energy(ADE)is measured to be 1.597±0.003,1.651±0.003,and 2.119±0.003 eV for TiO_(2)^(-),ZrO_(2)^(-),and HfO_(2)^(-),respectively.The vibrational frequencies of the anionic and neutral MO_(2)are also determined from the experimental spectra.The results of theoretical calculations show that the electronic configurations of MO_(2)^(-)are^(2)A_(1)with C_(2v)point group.Bond order analysis indicates that the two M-O bonds are all multiple characters.展开更多
基金National Natural Science Foundation of China,Grant/Award Numbers:22179008,21875022Yibin“Jie Bang Gua Shuai”,Grant/Award Number:2022JB004+2 种基金Beijing Nova Program,Grant/Award Number:20230484241Postdoctoral Fellowship Program of CPSF,Grant/Award Number:GZB20230931Special Support of Chongqing Postdoctoral Research Project,Grant/Award Number:2023CQBSHTB2041。
文摘The burgeoning growth in electric vehicles and portable energy storage systems necessitates advances in the energy density and cost-effectiveness of lithium-ion batteries(LIBs),areas where lithium-rich manganese-based oxide(LLO)materials naturally stand out.Despite their inherent advantages,these materials encounter significant practical hurdles,including low initial Coulombic efficiency(ICE),diminished cycle/rate performance,and voltage fading during cycling,hindering their widespread adoption.In response,we introduce an ionic-electronic dual-conductive(IEDC)surface control strategy that integrates an electronically conductive graphene framework with an ionically conductive heteroepitaxial spinel Li_(4)Mn_(5)O_(12)layer.Prolonged electrochemical and structural analyses demonstrate that this IEDC heterostructure effectively minimizes polarization,mitigates structural distortion,and enhances electronic/ionic diffusion.Density functional theory calculations highlight an extensive Li^(+)percolation network and lower Li^(+)migration energies at the layered-spinel interface.The designed LLO cathode with IEDC interface engineering(LMOSG)exhibits improved ICE(82.9%at 0.1 C),elevated initial discharge capacity(296.7 mAh g^(-1)at 0.1 C),exceptional rate capability(176.5 mAh g^(-1)at 5 C),and outstanding cycle stability(73.7%retention at 5 C after 500 cycles).These findings and the novel dual-conductive surface architecture design offer promising directions for advancing highperformance electrode materials.
基金financially supported by the National Natural Science Foundation of China(U20A20247)the National Key Research and Development Program of the Ministry of Science and Technology(2022YFA1402504)+1 种基金Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion(MATEC2023KF002)Guangdong Science and Technology Department(STKJ2021016)。
文摘Potassium-ion batteries(PIBs)were recognized for their natural abunda nce,high theoretical output voltage,and the availability of commercialized graphite anodes.However,the development of highperformance manganese-based layered oxide cathodes-a leading candidate for PIB systems-has been fundamentally constrained by irreversible phase transitions(PT)during the cycling process,manifesting as severe structural degradation and capacity fading.This review presents a transformative paradigm integrating machine learning(ML)with multiscale characterization to analyse the complex phase transition mechanisms in Mn-based cathodes.Through systematic ML-driven interrogation of structure-property relationships,we establish quantitative descriptors for phase stability and develop predictive models for transition dynamics.Furthermore,we highlight recent breakthroughs in cross-disciplinary approaches,enabling the rational design of PT-mitigated cathode architectures.By consolidating these insights into a unified knowledge framework,this work provides strategic guidelines for developing structurally robust Mn-based cathodes and outlines future research directions for next-generation PIB systems.
基金financial support from the National Natural Science Foundation of China (No. 21676036)the Natural Science Foundation of Chongqing (No. CSTB2023NSCQMSX0580)。
文摘Manganese(Mn)-based materials are considered as one of the most promising cathodes in zinc-ion batteries(ZIBs) for large-scale energy storage applications because of their multivalence, cost-effectiveness,natural availability, low toxicity, satisfactory capacity, and high operating voltage. In this review, the research status and related interface engineering strategies of Mn-based oxide cathode electrode materials for ZIB in recent years are summarized. Specifically, the review will focus on three types of interface engineering strategies, including interface reconstruction via cathode, interface reconstruction electrolyte, and protection via artificial cathode-electrolyte interphase(CEI) layer, within the context of their evolution of interface layer and corresponding electrochemical performance. A series of experimental variables, such as crystal structure, electrochemical reaction mechanism, and the necessary connection for the formation and evolution of interface layer, will be carefully analyzed by combining various advanced characterization techniques and theoretical calculations. Finally, suggestions and strategies are provided for reasonably designing the cathode-electrolyte interface to realize the excellent performance of Mn-based oxide zinc-based batteries.
基金sponsored by the National Natural Science Foundation of China(Grant 22406050)the Top-Notch Personnel Fund of Henan Agricultural University(Grant 30501029)+2 种基金the Natural Science Foundation of Henan Province(Grant 232300420293)the Science and Technology Project of China Tobacco Shaanxi Industrial Co.,Ltd.(Grant BA000-ZB24010)the Postgraduate Education Reform and Quality Improvement Project of Henan Province(Grant YJS2024JD17).
文摘The extensive use of diesel engines has led to significant emissions of pollutants,especially soot particles,which pose serious risks to both the environment and human health.At present,developing catalysts with low–temperature activity,low cost,and high stability remains the core challenge in eliminating soot from diesel engine exhaust.This paper first reviews the mechanisms of soot catalytic oxidation.Based on these mechanisms,the current design directions for soot catalysts are summarized and discussed.On the one hand,the effects of modification methods such as doping,loading,and solid solution on the performance of manganese-based catalysts are reviewed from the perspective of intrinsic activity.On the other hand,the research progress on manganese-based catalysts with specific morphological structures for soot oxidation is explored.Following the identification of design strategies,the commonly used preparation methods to achieve these designs are also outlined.Finally,the paper highlights the challenges associated with manganese-based catalysts in soot catalysis and discusses future research and development directions.
基金supported by National Key R&D Program of China(2022YFB3506200,2022YFB3504100)National Natural Science Foundation of China(22072095,22372107,22202058)+3 种基金Excellent Youth Science Foundation of Liaoning Province(2022-YQ-20)Shenyang Science and Technology Planning Project(22-322-3-28)Liaoning Xingliao talented youth Top talent program(XLYC2203007)University Joint Education Project for China-Central and Eastern European Countries(2021097).
文摘The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.
基金This work was financially supported by This work was financially supported by the National Natural Science Foundation of China(21725103 and 51631004)National Key R&D Program of China(2016YFB0100103,2017YFA0206704)+2 种基金People's Government of Jilin Province Science and Technology Development Plan Funding Project(20180101203JC)Changchun Science and Technology Development Plan Funding Project(18DY012,19SS010)the Program for the JLU Science and Technology Innovative Research Team(2017TD-09).
文摘Li-ion batteries(LIBs)with excellent cycling stability and high-energy densities have already occupied the commercial rechargeable battery market.Unfortunately,the high cost and intrinsic insecurity induced by organic electrolyte severely hinder their applications in large-scale energy storage.In contrast,aqueous Zn-ion batteries(ZIBs)are being developed as an ideal candidate because of their cheapness and high security.Benefiting from high operating voltage and acceptable specific capacity,recently,manganese-based oxides with different various crystal structures have been extensively studied as cathode materials for aqueous ZIBs.This review presents research progress of manganese-based cathodes in aqueous ZIBs,including various manganese-based oxides and their zinc storage mechanisms.In addition,we also discuss some optimization strategies that aim at improving the electrochemical performance of manganese-based cathodes,and the design of flexible aqueous ZIBs based on manganese-based cathodes(MZIBs).Finally,this review summarizes some valuable research directions,which will promote the further development of aqueous MZIBs.
基金the support from the National Natural Science Foun-dation of China(Grant No.U21A20311)the Distinguished Scientist Fellowship Program(DSFP)at King Saud University,Riyadh,Saudi Arabia.
文摘The growing need for higher energy density in rechargeable batteries necessitates the exploration of cathode materials with enhanced specific energy for lithium-ion batteries.Due to their exceptional cost-effectiveness and specific capacity,lithium-rich manganese-based cathode materials(LRMs)obtain in-creasing attention in the pursuit of enhancing energy density and reducing costs.The implementation has faced obstacles in various applications due to substantial capacity and voltage degradation,insufficient safety performance,and restricted rate capability during cycling.These issues arise from the migration of transition metal,the release of oxygen,and structural transformation.In this review,we provide an integrated survey of the structure,lithium storage mechanism,challenges,and origins of LRMs,as well as recent advancements in various coating strategies.Particularly,the significance of optimizing the design of the cathode electrolyte interphase was emphasized to enhance electrode performance.Furthermore,future perspective was also addressed alongside in-situ measurements,advanced synthesis techniques,and the application of machine learning to overcome encountered challenges in LRMs.
文摘With the aim to effectively depolymerize polyethylene terephthalate(PET)under mild reaction conditions,PET methanolysis and dimethyl terephthalate(DMT)hydrolysis are integrated in a catalyst system.Firstly,methanolysis of PET to DMT is achieved over Cu-Mg-Al oxide catalyst.Next,terephthalic acid(TPA)is prepared by DMT hydrolysis.It is found that hydrolysis of DMT to TPA can be promoted by introducing trace amount of water in this catalyst system.CuO-MgO-4.5Al_2O_(3)catalyst demonstrates the excellent catalytic performance for the depolymerization of PET with high conversion rate and TPA yield(100%and 99.5%,respectively)after reaction at 160℃for 6 h,which provides a new idea for the depolymerization of PET.
基金supported by the National Natural Science Foundation of China(No.21805018)by Sichuan Science and Technology Program(Nos.2022ZHCG0018,2023NSFSC0117 and 2023ZHCG0060)Yibin Science and Technology Program(No.2022JB005)and China Postdoctoral Science Foundation(No.2022M722704).
文摘Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.
文摘In the paper,we report a highly robust and porous bimetallic Ti-MOF(designated Mg_(2)Ti-ABTC)by utiliz-ing a trinuclear[Mg_(2)TiO(COO)_(6)]cluster and a tetradentate H_(4)ABTC(3,3′,5,5′-azobenzene tetracarboxylic acid)ligand.Mg_(2)Ti-ABTC exhibited permanent porosity for N_(2),CO_(2),CH_(4),C_(2)H_(2),C_(2)H_(4),and C_(2)H_(6)gas adsorption.Further-more,Mg_(2)Ti-ABTC exhibited outstanding photocatalytic activity in the oxidation of aromatic sulfides to the corre-sponding sulfoxides under ambient air conditions.Mechanism studies reveal that photoinduced holes(h^(+)),the super-oxide radical(·O_(2)^(-)),and singlet oxygen(^(1)O_(2))are pivotal species involved in the photocatalytic oxidation reaction.
基金supported by the National Key R&D Program of China(No.2022YFB2404400)the National Natural Science Foundation of China(Nos.U23A20577,52372168,92263206 and 21975006)+1 种基金the“The Youth Beijing Scholars program”(No.PXM2021_014204_000023)the Beijing Natural Science Foundation(Nos.2222001 and KM202110005009).
文摘The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.
基金supported by the National Natural Science Foundation of China(51422605)the Provincial Natural Science Foundation of Zhejiang,China(LR16E060001)~~
文摘Nitric oxide （NO） deep oxidation to dinitrogen pentoxide （N2O5） by ozone together with wet scrub-bing has become a promising technology for nitrogen-oxide （NOx） removal in industrial boilers. Catalysts were introduced to enhance the N2O5 formation rate with less ozone injection and leakage. A series of monometallic catalysts （manganese, cobalt, cerium, iron, copper, and chromium） as pre-pared by the sol-gel method were tested. The manganese oxides achieved an almost 80% conver-sion efficiency at an ozone （O3）/NO molar ratio of 2.0 in 0.12 s. The crystalline structure and porous parameters were determined. The thermodynamic reaction threshold of NO conversion to N2O5 is oxidation with an O3/NO molar ratio of 1.5. Spherical alumina was selected as the support to achieve the threshold, which was believed to improve the catalytic activity by increasing the surface area and the gas-solid contact time. Based on the manganese oxides, cerium, iron, chromium, cop-per, and cobalt were introduced as promoters. Cerium and iron improved the deep-oxidation effi-ciency compared with manganese/spherical alumina, with less than 50 mg/m3 of outlet NO ＋ nitro-gen oxide, and less than 25 mg/m3 of residual ozone at an O3/NO molar ratio of 1.5. The other three metal oxides inhibited catalytic activity. X-ray diffraction, nitrogen adsorption, hydrogen tempera-ture-programmed reduction, and X-ray photoelectron spectroscopy results indicate that the cata-lytic activity is affected by the synergistic action of NOx oxidation and ozone decomposition.
基金supported by the National Key Research and Development Program of China(No.2021YFC3200700)the National Natural Science Foundation of China(No.52400010)+1 种基金the Science and Technology Commission of Shanghai Municipality(No.24ZR1472300)the Fundamental Research Funds for the Central Universities.
文摘Bisphenol A(BPA)is a pervasive endocrine disruptor that enters the environment through anthropogenic activities,posing significant risks to ecosystems and human health.Advanced oxidation processes(AOPs)are promising methods for the removal of organic microcontaminants in the environment.Biogenic manganese oxides(BMO)are reported as catalysts due to their transitionmetal nature,and are also readily generated bymanganeseoxidizing microorganisms in the natural environment,and therefore their roles and effects in AOPs-based environmental remediation should be investigated.However,biogenic ironmanganese oxides(BFMO)are actually generated rather than BMO due to the coexistence of ferrous ionswhich can be oxidized to iron oxides.Therefore,this study produced BFMO originating from a highly efficientmanganese-oxidizing fungus Cladosporium sp.XM01 and chose peroxymonosulfate(PMS)as a typical oxidant for the degradation of bisphenol A(BPA),a model organic micropollutant.Characterization results indicate that the formed BFMO was amorphouswith a lowcrystallinity.The BFMO/PMS system achieved a high degradation performance that 85%BPA was rapidly degraded within 60min,and therefore the contribution of BFMO cannot be ignored during PMS-based environmental remediation.Different from the findings of previous studies(mostly radicals and singlet oxygen),the degradationmechanism was first proven as a 100%electron-transfer pathway mediated by high-valence Mn under acidic conditions provided by PMS.The findings of this study provide new insights into the degradation mechanisms of pollutants using biogenic metal oxides in PMS activation and the contribution of their coexistence in AOPs-based environmental remediation.
基金supported by the Scientific Research Project of Hunan Provincial EducationDepartment(No.22B0458)the National Natural Science Foundation of China(No.52270102).
文摘A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performance and corresponding structural feature was comprehensively evaluated by XPS,in situ DRIFTS,BET,XRD,SEM and H_(2)-TPR.Meanwhile,10%Gd0.25Ce0.75/MPB exhibited excellent performance,favorable SO_(2) and moisture toleration over a broad temperature range from 160 to 320℃,where it achieved 96.8%removal efficiency with 90.5%selectivity at 200℃.The single or united effects of O_(2),SO_(2),H_(2)O on HCHO abatement over 10%Gd_(0.25)Ce_(0.75)/MPB were tested,and the findings demonstrated that the suppressive effects of SO_(2) and H_(2)O outweighed the promoting influence of O_(2) within a specific range.Gd and Ce co-modified MPB revealed superior HCHO removal capability in contrast to that of Gd or Ce severally modified MPB,ascribing to the synergistic effect of GdO_(x) and CeO_(x) and benefitting from the augmentation of surface area and total pore volume,the aggrandizement of surface active oxygen species,the promotion of redox ability and the inhibition crystallization of CeO_(x).According to in situ DRIFTS,a series of intermediates including formate species and dioxymethylene(DOM)were produced,which would eventually decompose into H_(2)O and CO_(2).In addition,the mass transfer and diffusion of the reactants along with the accessibility of the catalytic sites were enlarged by the hierarchical porous structure of the support,which were also answerable for its distinguished catalytic performance.Furthermore,10%Gd0.25Ce0.75/MPB possessed remarkable potential for industrial applications.
基金supported by the National Basic Research Program of China(Grant No.2021YFA1401901)the National Natural Science Foundation of China(Grant No.12474138)。
文摘The Kitaev honeycomb model has received significant attention due to its exactly solvable quantum spin liquid ground states and fractionalized excitations.Layered cobalt oxides have been considered as a promising platform for realizing this model.However,in contrast to the conventional wisdom regarding the single-q zigzag magnetic order inferred from previous studies of the candidate materials Na_(2)IrO_(3) and α-RuCl_(3),recent experiments on two representative honeycomb cobalt oxides,hexagonal Na_(2)Co_(2)TeO_(6) and monoclinic Na_(3)Co_(2)SbO_(6),have uncovered evidence for more complex multi-q zigzag order variants.This review surveys the experimental strategies used to distinguish between single-and multi-q orders,along with the crystallographic symmetries of cobalt oxides,in comparison with previously studied systems.The general formation mechanism of multi-q order is also briefly discussed.The goal is to provide a solid ground for examining the relevance of multi-q order in honeycomb cobalt oxides and discuss its implications for the microscopic model of these intriguing quantum magnets.
基金financial support from the National Key R&D Program of China(2021YFB3500700)the National Natural Science Foundation of China(22473042,22003016,and 92145302).
文摘The use of metal oxides has been extensively documented in the literature and applied in a variety of contexts,including but not limited to energy storage,chemical sensors,and biomedical applications.One of the most significant applications of metal oxides is heterogeneous catalysis,which represents a pivotal technology in industrial production on a global scale.Catalysts serve as the primary enabling agents for chemical reactions,and among the plethora of catalysts,metal oxides including magnesium oxide(MgO),ceria(CeO_(2))and titania(TiO_(2)),have been identified to be particularly effective in catalyzing a variety of reactions[1].Theoretical calculations based on density functional theory(DFT)and a multitude of other quantum chemistry methods have proven invaluable in elucidating the mechanisms of metal-oxide-catalyzed reactions,thereby facilitating the design of high-performance catalysts[2].
基金supported by the Scientific Research Project of Hunan Provincial Department of Education (No.22B0458)the National Natural Science Foundation of China (No.52270102).
文摘In this study,a string of Cr-Mnco-modified activated coke catalysts(XCryMn1-y/AC)were prepared to investigate toluene and Hg^(0) removal performance.Multifarious characterizations including XRD,TEM,SEM,in situ DRIFTS,BET,XPS and H_(2)-TPR showed that 4%Cr0.5Mn0.5/AC had excellent physicochemical properties and exhibited the best toluene and Hg^(0) removal efficiency at 200℃.By varying the experimental gas components and conditions,it was found that too large weight hourly space velocity would reduce the removal efficiency of toluene and Hg^(0).Although O_(2) promoted the abatement of toluene and Hg^(0),the inhibitory role of H_(2)O and SO_(2) offset the promoting effect of O_(2) to some extent.Toluene significantly inhibited Hg^(0) removal,resulting from that toluene was present at concentrations orders of magnitude greater than mercury’s or the catalyst was more prone to adsorb toluene,while Hg^(0) almost exerted non-existent influence on toluene elimination.The mechanistic analysis showed that the forms of toluene and Hg^(0) removal included both adsorption and oxidation,where the high-valent metal cations and oxygen vacancy clusters promoted the redox cycle of Cr^(3+)+Mn^(3+)/Mn^(4+)+Cr^(6+)+Mn^(2+),which facilitated the conversion and replenishment of reactive oxygen species in the oxidation process,and even the CrMn_(1.5)O_(4) spinel structure could provide a larger catalytic interface,thus enhancing the adsorption/oxidation of toluene and Hg^(0).Therefore,its excellent physicochemical properties make it a costeffective potential industrial catalyst with outstanding synergistic toluene and Hg^(0) removal performance and preeminent resistance to H_(2)O and SO_(2).
基金supported by National Natural Science Fundation of China(Nos.52170086,22308194,U22A20423)Natural Science Foundation of Shandong Province(No.ZR2021ME013)+1 种基金Taishan Scholars Program of Shandong Province(No.tsqn202211012)Shandong Provincial Excellent Youth(No.ZR2022YQ47)。
文摘Although the powder Fenton-like catalysts have exhibited high catalytic performances towards pollutant degradation,they cannot be directly used for Fenton-like industrialization considering the problems of loss and recovery.Therefore,the membrane fixation of catalyst is an important step to realize the actual application of Fenton-like catalysts.In this work,an efficient catalyst was developed with Co-N_(x)configuration facilely reconstructed on the surface of Co_(3)O_(4)(Co-N_(x)/Co_(3)O_(4)),which exhibited superior catalytic activity.We further fixed the highly efficient Co-N_(x)/Co_(3)O_(4)onto three kinds of organic membranes and one kind of inorganic ceramic membrane installing with the residual PMS treatment device to investigate its catalytic stability and sustainability.Results indicated that the inorganic ceramic membrane(CM)can achieve high water flux of 710 L m-2h-1,and the similar water flux can be achieved by Co-N_(x)/Co_(3)O_(4)/CM even without the pressure extraction.We also employed the Co-N_(x)/Co_(3)O_(4)/CM system to the wastewater secondary effluent,and the pollutant in complicated secondary effluent could be highly removed by the Co-N_(x)/Co_(3)O_(4)/CM system.This paper provides a new point of view for the application of metal-based catalysts with M-N_(x)coordination in catalytic reaction device.
基金financially supported by the National Natural Science Foundation of China(No.52201173)the S&T Program of Hebei(No.22567627H)+3 种基金the Natural Science Foundation of Hebei Province(No.E2021501017)Henan key Laboratory of Aeronautical Materials and Application Technology Open fund(No.ZHKF-230113)Hebei Key Laboratory of Dielectric and Electrolyte Functional Material,Northeastern University at Qinhuangdao(HKDEFM2021301)the Fundamental Research Funds for the Central Universities(No.2024GFYD002,N2323021)
文摘A_(2)B_(2)O_(7)high-entropy oxides are ceramic materials characterized by diverse compositions,strong structural inclusivity,and a broad range of potential applications.These materials hold significant value in fields such as thermal barrier coatings,energy storage,dielectric materials,and transparent ceramics.However,there are limited reports on the dielectric properties of A_(2)B_(2)O_(7)high-entropy oxides.Consequently,further investigation is required to understand the polarization mechanisms in high-entropy ceramics and analyze the formation of oxygen vacancies and their influence.In the present study,La_(2)[(TiZrSnHfGe)_((1-2x)5)(NbGa)_(x)]_(2)O_(7)(x=0.129,0.143,0.157,0.171)(LTZSHGNGO)ceramics were synthesized successfully using a conventional solidstate reaction method.Compared withLa_(2)(TiZrSnHfGe)_(2)O_(7)ceramics,LTZSHGNGO demonstrated a nearly 6.7-fold increase in dielectric constant and a 33%reduction in dielectric loss.The incorporation of Nb/Ga enhanced the high-temperature dielectric properties and improved dielectric stability.The exceptional dielectric performance is primarily attributed to the synergistic highentropy effect,while Nb/Ga doping increased the number of oxygen vacancies and generated more defect dipole clusters[Ti^(4+)·e-V_(O)^(**)-Ti^(4+)·e].This study provides novel insights into the dielectric properties of LTZSHGNGO high-entropy ceramics and offers a novel approach to understanding the performance of A_(2)B_(2)O_(7)ceramics.
基金supported by the National Natural Science Foundation of China(No.22273065)Shandong Energy institute(SEI U202312)"Strategic Priority Research Program"of the Chinese Academy of Sciences(No.XDA02020000).
文摘The vibrational resolved spectra of MO_(2)^(-)/MO_(2)(M=Ti,Zr,and Hf)are reported by using photoelectron imaging and theoretical calculations.The results indicate that all the ground states of anionic and neutral MO_(2)(M=Ti,Zr,and Hf)compounds are formed in bent insertion structures.The observed ground-state adiabatic detachment energy(ADE)is measured to be 1.597±0.003,1.651±0.003,and 2.119±0.003 eV for TiO_(2)^(-),ZrO_(2)^(-),and HfO_(2)^(-),respectively.The vibrational frequencies of the anionic and neutral MO_(2)are also determined from the experimental spectra.The results of theoretical calculations show that the electronic configurations of MO_(2)^(-)are^(2)A_(1)with C_(2v)point group.Bond order analysis indicates that the two M-O bonds are all multiple characters.
