Severe injuries due to electricity are rare,but when they occur,they may cause life-threatening conditions.In order to define the severity of electrical injuries,the most widely used classification is voltage power.In...Severe injuries due to electricity are rare,but when they occur,they may cause life-threatening conditions.In order to define the severity of electrical injuries,the most widely used classification is voltage power.Injuries are mainly classified into two categories as low voltage electrical injuries(LVEI)(<1000 V)and high voltage electrical injuries(>1000 V).Fatal injuries have been reported mostly after high-voltage electric shock.Low-voltage electricity current rarely causes severe trauma and complications.展开更多
Low-voltage electromagnetic compaction （EMC） was used to compact metal powders （Cu） and ceramic powders （TiO2） in the indirect way. It was found that the density of the metal powder parts compacted by low-voltag...Low-voltage electromagnetic compaction （EMC） was used to compact metal powders （Cu） and ceramic powders （TiO2） in the indirect way. It was found that the density of the metal powder parts compacted by low-voltage EMC varied linearly with the discharging voltage in the range investigated. But for ceramic powders, the discharging voltage has an optimal value. Under the value, the density increases as discharging voltage rises, but beyond the value the trend is reverse. The experimental results show that the density of the metal parts decreases gradually along press direction. And the density of the ceramic parts decreases with the advancement of the aspect ratio h/d （height/diameter）. In addition, repetitive compaction can improve the density of both metal and ceramic parts and reduce the effects of aspect ratio on the density.展开更多
Powder metallurgy is an efficient approach to fabricate varieties of high performance structure materials, function materials and special materials working under limited conditions. Research and development of new eff...Powder metallurgy is an efficient approach to fabricate varieties of high performance structure materials, function materials and special materials working under limited conditions. Research and development of new efficient technology to form high-density, high-performance and net shape parts is a key to widen application and development of powder materials. Recently, the low-voltage electromagnetic compaction (EMC) has been used by present authors to compacted copper, tin, aluminum powders and the products with 99% relative density have been acquired. In this work, the research has been extended to investigation on the density uniformity of pressed parts. The analysis results show that the density of the part compacted by low-voltage EMC decreases gradually in press direction as static compaction. But it is higher and more homogeneous. The density of the top part increases gradually from the center to the outer, which is just reversal of the bottom part. In some extent, the higher the discharging voltage is, the higher the density is and the more homogeneous the distribution is. In addition, repetitive compaction can improve the density of powder parts and the distribution uniformity.展开更多
This study was conducted to verify the effect of an electric pulse on growth of crops (lettuce and hot pepper) that were cultivated in lab-scale soil. The electric pulse generated from direct-circuited 2, 4, 6, 8, and...This study was conducted to verify the effect of an electric pulse on growth of crops (lettuce and hot pepper) that were cultivated in lab-scale soil. The electric pulse generated from direct-circuited 2, 4, 6, 8, and 10 V of electricity by periodic exchange of the anode and cathode was charged to a culture soil that is an electrically pulsed culture soil (EPCS) but not charged to a conventional culture soil (CCS). Growth of lettuce increased and growth duration of hot pepper plants was more prolonged at 4, 6, 8, and 10 V of EPCS than at 2 V of EPCS and CCS. The fruiting duration and yield of hot pepper fruits were proportional to the growth duration of the hot pepper plants. Temperature gradient gel electrophoresis (TGGE) patterns of 16S-rDNA obtained from the bacterial community inhabiting the CCS and EPCS were identical at the initial time and did not change significantly at days 28 and 56 of cultivation. The bacterial communities inhabiting the surface of lettuce roots were not influenced by the electric pulse but were significantly different from those inhabiting the culture soil based on the TGGE patterns. Growth of lettuce and hot pepper plants that were cultivated in 4 - 10 V of EPCS may increase;however, the bacterial community inhabiting the soil and the surface of plant roots may not be influenced by an electric pulse.展开更多
It is necessary to take measures against infectious diseases in the Southeast Asian prawn farming industry. In giant tiger prawn （Penaeus monodon） aquaculture, diseases caused by viruses such as white spot syndrome ...It is necessary to take measures against infectious diseases in the Southeast Asian prawn farming industry. In giant tiger prawn （Penaeus monodon） aquaculture, diseases caused by viruses such as white spot syndrome virus （WSSV） and bacteria such as Vibrio have become a menace. Appropriate treatments of prawn culture pond＇s waters are advocated for preventing and controlling pathogens. The purpose of this study was to conduct an antimicrobial water treatment using a low-voltage pulsed electric field sterilization. Here we prepared a mechanical low-voltage pulsed electric field system with copper wire coiling around a titanium ring. The viability of WSSV in seawater was examined by prawn infectivity experiments. We inoculated healthy prawns （approximately 10-15 g） with the WSSV master sample that passed 0-3 times through the system. WSSV infection in prawns decreased according to the number of passes through the system. Healthy prawns survived for〉 10 days without feeding, where as prawns inoculated with the WSSV master sample showed symptoms of white spot and died in about 4 days. Two-thirds of the prawns inoculated with the WSSV master sample that was passed once through the system developed WSSV symptoms and were polymerase chain reaction （PCR） positive. However, no symptoms were observed and prawns were PCR negative when the WSSV master sample was passed three times through the system. Based on these results, we purpose that a low-voltage pulsed electric field system will serve as an efficient pond drainage sterilization system and will replace conventional treatments using chemicals such as sodium hypochlorite.展开更多
To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common r...To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common reservoir.First,some operation modes of mPSS are analyzed,which include the separated reservoir mode(SRM)and common reservoir mode(CRM).Then,based on the SRM,and CRM,an energy mutual assistance control model between LVSs has been built to optimize energy loss.Finally,in the simulation,compared to the model without pumped storage in the LVS,the SRMand CLRMcan decrease the total energy loss by 294.377 and 432.578 kWh,respectively.The configuration of mPSS can improve the utilization rate of the new energy source generation system,and relieve the pressure of transformer capacity in the LVS.Compared with the SRM,the proposed CRM has reduced the total energy loss by 138.201 kWh,increased the new energy consumption by 161.642 kWh,and decreased the line loss by 7.271 kWh.With the efficiency of the mPSS improving,the total energy loss reduction of CRM will be 3.5 times that of SRM.Further,the CRMcan significantly reduce the reservoir capacity construction of mPSS and ismore suitable for scenarios where the capacity configuration of mPSS is limited.展开更多
The low-voltage-electromagnetic forming was applied to powder compaction.A series of experiments was performed to compact aluminum,copper and tin powders in an indirect working way.Having compacted high-density powder...The low-voltage-electromagnetic forming was applied to powder compaction.A series of experiments was performed to compact aluminum,copper and tin powders in an indirect working way.Having compacted high-density powder parts successfully,the authors analyzed the effects of voltage,capacitance,friction,compaction times,powder size and other factors on the densities of compacted specimens.The experimental results show that lower voltage but larger capacitance are beneficial to increasing the density and homogeneity of the compacted specimens,if the loading velocity and discharging energy are suitable.The higher the voltage,the greater the percentage of energy consumed by friction.If the equipment energy is limited,the iterative compaction is an efficient way to manufacture homogeneous and high-density powder parts.展开更多
Piezoelectric transduction technology enables the direct conversion between mechanical and electrical energy,finding extensive applications in sensing,acoustics,imaging,actuation,and energy harvesting[1].Previous stud...Piezoelectric transduction technology enables the direct conversion between mechanical and electrical energy,finding extensive applications in sensing,acoustics,imaging,actuation,and energy harvesting[1].Previous studies on piezoelectric materials have primarily focused on ceramics or single-crystal materials characterized by wide band gaps(E_(g)>2.0 e V[2])and low electrical conductivity.In contrast,narrow-bandgap(E_(g)<0.5 eV[3])semiconductor materials typically exhibit high electrical conductivity,which is unfavorable for the effective accumulation of charges required to establish a stable voltage response.Consequently,experimental investigations into the piezoelectric effect of narrow-bandgap semiconductors are scarce.展开更多
A novel structure of low-voltage trigger silicon-controlled rectifiers(LVTSCRs) with low trigger voltage and high holding voltage is proposed for electrostatic discharge(ESD) protection. The proposed ESD protection de...A novel structure of low-voltage trigger silicon-controlled rectifiers(LVTSCRs) with low trigger voltage and high holding voltage is proposed for electrostatic discharge(ESD) protection. The proposed ESD protection device possesses an ESD implant and a floating structure. This improvement enhances the current discharge capability of the gate-grounded NMOS and weakens the current gain of the silicon-controlled rectifier current path. According to the simulation results, the proposed device retains a low trigger voltage characteristic of LVTSCRs and simultaneously increases the holding voltage to 5.53 V, providing an effective way to meet the ESD protection requirement of the 5 V CMOS process.展开更多
Ferroelectrics(FEs)have shown great potential in sensors,actuators,and electrocaloric cooling due to their direct cross-couplings between electric polarization and mechanical,thermal,and dielectric properties[1−3]Comp...Ferroelectrics(FEs)have shown great potential in sensors,actuators,and electrocaloric cooling due to their direct cross-couplings between electric polarization and mechanical,thermal,and dielectric properties[1−3]Compared with oxide FEs,polymer FEs possess good flexible and shape adaptability,making them promising candidates for flexible electronics and biocompatible devices[4].展开更多
Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and ...Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and stretchability that align with biological tissues.Specifically,their materials should be capable of elastic strain up to 50–80%,while the devices themselves must maintain electric stability under strains that accommodate body movements[1].展开更多
Accurate short-term electricity price forecasts are essential for market participants to optimize bidding strategies,hedge risk and plan generation schedules.By leveraging advanced data analytics and machine learning ...Accurate short-term electricity price forecasts are essential for market participants to optimize bidding strategies,hedge risk and plan generation schedules.By leveraging advanced data analytics and machine learning methods,accurate and reliable price forecasts can be achieved.This study forecasts day-ahead prices in Türkiye’s electricity market using eXtreme Gradient Boosting(XGBoost).We benchmark XGBoost against four alternatives—Support Vector Machines(SVM),Long Short-Term Memory(LSTM),Random Forest(RF),and Gradient Boosting(GBM)—using 8760 hourly observations from 2023 provided by Energy Exchange Istanbul(EXIST).All models were trained on an identical chronological 80/20 train–test split,with hyperparameters tuned via 5-fold cross-validation on the training set.XGBoost achieved the best performance(Mean Absolute Error(MAE)=144.8 TRY/MWh,Root Mean Square Error(RMSE)=201.8 TRY/MWh,coefficient of determination(R^(2))=0.923)while training in 94 s.To enhance interpretability and identify key drivers,we employed Shapley Additive Explanations(SHAP),which highlighted a strong association between higher prices and increased natural-gas-based generation.The results provide a clear performance benchmark and practical guidance for selecting forecasting approaches in day-ahead electricity markets.展开更多
To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobje...To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobjective optimization.First,a dual-convolution enhanced improved Crossformer prediction model is constructed,which employs parallel 1×1 global and 3×3 local convolutionmodules(Integrated Convolution Block,ICB)formultiscale feature extraction,combinedwith anAdaptive Spectral Block(ASB)to enhance time-series fluctuationmodeling.Based on high-precision predictions,a carbon-electricity cost joint optimization model is further designed to balance economic,environmental,and grid-friendly objectives.The model’s superiority was validated through a case study using real-world data from a renewable-heavy grid.Simulation results show that the proposed multi-objective strategy demonstrated a superior balance compared to baseline and benchmark models,achieving a 15.8%reduction in carbon emissions and a 5.2%reduction in economic costs,while still providing a substantial 22.2%reduction in the peak-valley difference.Its balanced performance significantly outperformed both a single-objective strategy and a state-of-the-art Model Predictive Control(MPC)benchmark,highlighting the advantage of a global optimization approach.This study provides theoretical and technical pathways for dynamic carbon factor-driven EV charging optimization.展开更多
Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is p...Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.展开更多
The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack...The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack a unified data structure,and depend heavily on manual intervention to process high-frequency and retroactive transactions.To address these limitations,a graph-based unified settlement framework is proposed to enhance automation,flexibility,and adaptability in electricity market settlements.A flexible attribute-graph model is employed to represent heterogeneousmulti-market data,enabling standardized integration,rapid querying,and seamless adaptation to evolving business requirements.An extensible operator library is designed to support configurable settlement rules,and a suite of modular tools—including dataset generation,formula configuration,billing templates,and task scheduling—facilitates end-to-end automated settlement processing.A robust refund-clearing mechanism is further incorporated,utilizing sandbox execution,data-version snapshots,dynamic lineage tracing,and real-time changecapture technologies to enable rapid and accurate recalculations under dynamic policy and data revisions.Case studies based on real-world data from regional Chinese markets validate the effectiveness of the proposed approach,demonstrating marked improvements in computational efficiency,system robustness,and automation.Moreover,enhanced settlement accuracy and high temporal granularity improve price-signal fidelity,promote cost-reflective tariffs,and incentivize energy-efficient and demand-responsive behavior among market participants.The method not only supports equitable and transparent market operations but also provides a generalizable,scalable foundation for modern electricity settlement platforms in increasingly complex and dynamic market environments.展开更多
The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter per...The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter persistent dendrite growth and parasitic reactions,driven by the inhomogeneous charge distribution and water-dominated environment within the EDL.Compounding this,classical EDL theory,rooted in meanfield approximations,further fails to resolve molecular-scale interfacial dynamics under battery-operating conditions,limiting mechanistic insights.Herein,we established a multiscale theoretical calculation framework from single molecular characteristics to interfacial ion distribution,revealing the EDL’s structure and interactions between different ions and molecules,which helps us understand the parasitic processes in depth.Simulations demonstrate that water dipole and sulfate ion adsorption at the inner Helmholtz plane drives severe hydrogen evolution and by-product formation.Guided by these insights,we engineered a“water-poor and anion-expelled”EDL using 4,1’,6’-trichlorogalactosucrose(TGS)as an electrolyte additive.As a result,Zn||Zn symmetric cells with TGS exhibited stable cycling for over 4700 h under a current density of 1 mA cm^(−2),while NaV_(3)O_(8)·1.5H_(2)O-based full cells kept 90.4%of the initial specific capacity after 800 cycles at 5 A g^(−1).This work highlights the power of multiscale theoretical frameworks to unravel EDL complexities and guide high-performance ARZB design through integrated theory-experiment approaches.展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods a...Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods allow for EVs to be charged without thought being given to the condition of the battery or the grid demand,thus increasing energy costs and battery aging.This study proposes a smart charging station with an AI-powered Battery Management System(BMS),developed and simulated in MATLAB/Simulink,to increase optimality in energy flow,battery health,and impractical scheduling within the IoEV environment.The system operates through real-time communication,load scheduling based on priorities,and adaptive charging based on batterymathematically computed State of Charge(SOC),State of Health(SOH),and thermal state,with bidirectional power flow(V2G),thus allowing EVs’participation towards grid stabilization.Simulation results revealed that the proposed model can reduce peak grid load by 37.8%;charging efficiency is enhanced by 92.6%;battery temperature lessened by 4.4℃;SOH extended over 100 cycles by 6.5%,if compared against the conventional technique.By this way,charging time was decreased by 12.4% and energy costs dropped by more than 20%.These results showed that smart charging with intelligent BMS can boost greatly the operational efficiency and sustainability of the IoEV ecosystem.展开更多
A low-voltage ride-through(LVRT)control strategy for the multi-port power electronic transformer(PET)based on power co-regulation is proposed.During the sag and recovery of the grid-side voltage of the medium-voltage ...A low-voltage ride-through(LVRT)control strategy for the multi-port power electronic transformer(PET)based on power co-regulation is proposed.During the sag and recovery of the grid-side voltage of the medium-voltage ac(MVac)port,the grid-connected active power of the low-voltage ac(LVac)port,rather than the power from external renewable energy sources(e.g.,photovoltaic(PV)),is adjusted quickly to rebalance the power flowing across all ports,thereby preventing overcurrent and overvoltage.Moreover,a power-coordinate-frame-based LVRT mode classification is designed,and a total of six LVRT modes are classified to meet the LVRT requirements in all power configuration scenarios of the PET.In this way,the PET is endowed with the LVRT capability in both power-generation and power-consumption states,which is significantly different from traditional power generation systems such as PV or wind power.Furthermore,by optimizing the active power regulation path during LVRT transition,the overcurrent problem caused by the grid-voltage sag-depth detection delay is overcome.Finally,the effectiveness of the proposed control scheme is verified by experiments on a hardware-in-the-loop platform.展开更多
Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to miti...Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to mitigate the freshwater,energy and food crises.However,the performance of solar-driven systems decreases significantly during operation due to uncontrollable weather.This study proposes an integrated water/electricity cogeneration-cultivation system with superior thermal management.The energy storage evaporator,consisting of energy storage microcapsules/hydrogel composites,is optimally designed for sustainable desalination,achieving an evaporation rate of around 1.91 kg m^(-2)h^(-1).In the dark,heat released from the phase-change layer supported an evaporation rate of around 0.54kg m^(-2)h^(-1).Reverse electrodialysis harnessed the salinity-gradient energy enhanced during desalination,enabling the long-running WEC system to achieve a power output of~0.3 W m^(-2),which was almost three times higher than that of conventional seawater/surface water mixing.Additionally,an integrated crop irrigation platform utilized system drainage for real-time,on-demand wheat cultivation without secondary contaminants,facilitating seamless WEF integration.This work presents a novel approach to all-day solar water production,electricity generation and crop irrigation,offering a solution and blueprint for the sustainable development of WEF.展开更多
文摘Severe injuries due to electricity are rare,but when they occur,they may cause life-threatening conditions.In order to define the severity of electrical injuries,the most widely used classification is voltage power.Injuries are mainly classified into two categories as low voltage electrical injuries(LVEI)(<1000 V)and high voltage electrical injuries(>1000 V).Fatal injuries have been reported mostly after high-voltage electric shock.Low-voltage electricity current rarely causes severe trauma and complications.
基金the National Natural Science Foundation of China(No.50375114)State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology(No.05-03)
文摘Low-voltage electromagnetic compaction （EMC） was used to compact metal powders （Cu） and ceramic powders （TiO2） in the indirect way. It was found that the density of the metal powder parts compacted by low-voltage EMC varied linearly with the discharging voltage in the range investigated. But for ceramic powders, the discharging voltage has an optimal value. Under the value, the density increases as discharging voltage rises, but beyond the value the trend is reverse. The experimental results show that the density of the metal parts decreases gradually along press direction. And the density of the ceramic parts decreases with the advancement of the aspect ratio h/d （height/diameter）. In addition, repetitive compaction can improve the density of both metal and ceramic parts and reduce the effects of aspect ratio on the density.
文摘Powder metallurgy is an efficient approach to fabricate varieties of high performance structure materials, function materials and special materials working under limited conditions. Research and development of new efficient technology to form high-density, high-performance and net shape parts is a key to widen application and development of powder materials. Recently, the low-voltage electromagnetic compaction (EMC) has been used by present authors to compacted copper, tin, aluminum powders and the products with 99% relative density have been acquired. In this work, the research has been extended to investigation on the density uniformity of pressed parts. The analysis results show that the density of the part compacted by low-voltage EMC decreases gradually in press direction as static compaction. But it is higher and more homogeneous. The density of the top part increases gradually from the center to the outer, which is just reversal of the bottom part. In some extent, the higher the discharging voltage is, the higher the density is and the more homogeneous the distribution is. In addition, repetitive compaction can improve the density of powder parts and the distribution uniformity.
文摘This study was conducted to verify the effect of an electric pulse on growth of crops (lettuce and hot pepper) that were cultivated in lab-scale soil. The electric pulse generated from direct-circuited 2, 4, 6, 8, and 10 V of electricity by periodic exchange of the anode and cathode was charged to a culture soil that is an electrically pulsed culture soil (EPCS) but not charged to a conventional culture soil (CCS). Growth of lettuce increased and growth duration of hot pepper plants was more prolonged at 4, 6, 8, and 10 V of EPCS than at 2 V of EPCS and CCS. The fruiting duration and yield of hot pepper fruits were proportional to the growth duration of the hot pepper plants. Temperature gradient gel electrophoresis (TGGE) patterns of 16S-rDNA obtained from the bacterial community inhabiting the CCS and EPCS were identical at the initial time and did not change significantly at days 28 and 56 of cultivation. The bacterial communities inhabiting the surface of lettuce roots were not influenced by the electric pulse but were significantly different from those inhabiting the culture soil based on the TGGE patterns. Growth of lettuce and hot pepper plants that were cultivated in 4 - 10 V of EPCS may increase;however, the bacterial community inhabiting the soil and the surface of plant roots may not be influenced by an electric pulse.
文摘It is necessary to take measures against infectious diseases in the Southeast Asian prawn farming industry. In giant tiger prawn （Penaeus monodon） aquaculture, diseases caused by viruses such as white spot syndrome virus （WSSV） and bacteria such as Vibrio have become a menace. Appropriate treatments of prawn culture pond＇s waters are advocated for preventing and controlling pathogens. The purpose of this study was to conduct an antimicrobial water treatment using a low-voltage pulsed electric field sterilization. Here we prepared a mechanical low-voltage pulsed electric field system with copper wire coiling around a titanium ring. The viability of WSSV in seawater was examined by prawn infectivity experiments. We inoculated healthy prawns （approximately 10-15 g） with the WSSV master sample that passed 0-3 times through the system. WSSV infection in prawns decreased according to the number of passes through the system. Healthy prawns survived for〉 10 days without feeding, where as prawns inoculated with the WSSV master sample showed symptoms of white spot and died in about 4 days. Two-thirds of the prawns inoculated with the WSSV master sample that was passed once through the system developed WSSV symptoms and were polymerase chain reaction （PCR） positive. However, no symptoms were observed and prawns were PCR negative when the WSSV master sample was passed three times through the system. Based on these results, we purpose that a low-voltage pulsed electric field system will serve as an efficient pond drainage sterilization system and will replace conventional treatments using chemicals such as sodium hypochlorite.
基金sponsored by the State Grid Corporation of China Technology Project(Research on Key Technologies and Equipment Development of Micro Pumped Storage for Distributed New Energy Consumption in Distribution Networks,5400-202324196A-1-1-ZN).
文摘To enhance energy interaction among low-voltage stations(LVSs)and reduce the line loss of the distribution network,a novel operation mode of the micro-pumped storage system(mPSS)has been proposed based on the common reservoir.First,some operation modes of mPSS are analyzed,which include the separated reservoir mode(SRM)and common reservoir mode(CRM).Then,based on the SRM,and CRM,an energy mutual assistance control model between LVSs has been built to optimize energy loss.Finally,in the simulation,compared to the model without pumped storage in the LVS,the SRMand CLRMcan decrease the total energy loss by 294.377 and 432.578 kWh,respectively.The configuration of mPSS can improve the utilization rate of the new energy source generation system,and relieve the pressure of transformer capacity in the LVS.Compared with the SRM,the proposed CRM has reduced the total energy loss by 138.201 kWh,increased the new energy consumption by 161.642 kWh,and decreased the line loss by 7.271 kWh.With the efficiency of the mPSS improving,the total energy loss reduction of CRM will be 3.5 times that of SRM.Further,the CRMcan significantly reduce the reservoir capacity construction of mPSS and ismore suitable for scenarios where the capacity configuration of mPSS is limited.
文摘The low-voltage-electromagnetic forming was applied to powder compaction.A series of experiments was performed to compact aluminum,copper and tin powders in an indirect working way.Having compacted high-density powder parts successfully,the authors analyzed the effects of voltage,capacitance,friction,compaction times,powder size and other factors on the densities of compacted specimens.The experimental results show that lower voltage but larger capacitance are beneficial to increasing the density and homogeneity of the compacted specimens,if the loading velocity and discharging energy are suitable.The higher the voltage,the greater the percentage of energy consumed by friction.If the equipment energy is limited,the iterative compaction is an efficient way to manufacture homogeneous and high-density powder parts.
文摘Piezoelectric transduction technology enables the direct conversion between mechanical and electrical energy,finding extensive applications in sensing,acoustics,imaging,actuation,and energy harvesting[1].Previous studies on piezoelectric materials have primarily focused on ceramics or single-crystal materials characterized by wide band gaps(E_(g)>2.0 e V[2])and low electrical conductivity.In contrast,narrow-bandgap(E_(g)<0.5 eV[3])semiconductor materials typically exhibit high electrical conductivity,which is unfavorable for the effective accumulation of charges required to establish a stable voltage response.Consequently,experimental investigations into the piezoelectric effect of narrow-bandgap semiconductors are scarce.
基金supported by the National Natural Science Foundation of China (Grant No. 61904110)。
文摘A novel structure of low-voltage trigger silicon-controlled rectifiers(LVTSCRs) with low trigger voltage and high holding voltage is proposed for electrostatic discharge(ESD) protection. The proposed ESD protection device possesses an ESD implant and a floating structure. This improvement enhances the current discharge capability of the gate-grounded NMOS and weakens the current gain of the silicon-controlled rectifier current path. According to the simulation results, the proposed device retains a low trigger voltage characteristic of LVTSCRs and simultaneously increases the holding voltage to 5.53 V, providing an effective way to meet the ESD protection requirement of the 5 V CMOS process.
基金support from the Natural Science Fund for Colleges and Universities in Jiangsu Province(24KJB430029)the Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(NY224032,NY225006).
文摘Ferroelectrics(FEs)have shown great potential in sensors,actuators,and electrocaloric cooling due to their direct cross-couplings between electric polarization and mechanical,thermal,and dielectric properties[1−3]Compared with oxide FEs,polymer FEs possess good flexible and shape adaptability,making them promising candidates for flexible electronics and biocompatible devices[4].
基金supported by generous grants from the Natural Science Foundation of Zhejiang Province(LR24E030003)Zhejiang Province Qianjiang Talent Program(ZJ-QJRC-2020-32).
文摘Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and stretchability that align with biological tissues.Specifically,their materials should be capable of elastic strain up to 50–80%,while the devices themselves must maintain electric stability under strains that accommodate body movements[1].
文摘Accurate short-term electricity price forecasts are essential for market participants to optimize bidding strategies,hedge risk and plan generation schedules.By leveraging advanced data analytics and machine learning methods,accurate and reliable price forecasts can be achieved.This study forecasts day-ahead prices in Türkiye’s electricity market using eXtreme Gradient Boosting(XGBoost).We benchmark XGBoost against four alternatives—Support Vector Machines(SVM),Long Short-Term Memory(LSTM),Random Forest(RF),and Gradient Boosting(GBM)—using 8760 hourly observations from 2023 provided by Energy Exchange Istanbul(EXIST).All models were trained on an identical chronological 80/20 train–test split,with hyperparameters tuned via 5-fold cross-validation on the training set.XGBoost achieved the best performance(Mean Absolute Error(MAE)=144.8 TRY/MWh,Root Mean Square Error(RMSE)=201.8 TRY/MWh,coefficient of determination(R^(2))=0.923)while training in 94 s.To enhance interpretability and identify key drivers,we employed Shapley Additive Explanations(SHAP),which highlighted a strong association between higher prices and increased natural-gas-based generation.The results provide a clear performance benchmark and practical guidance for selecting forecasting approaches in day-ahead electricity markets.
基金Supported by State Grid Corporation of China Science and Technology Project:Research on Key Technologies for Intelligent Carbon Metrology in Vehicle-to-Grid Interaction(Project Number:B3018524000Q).
文摘To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobjective optimization.First,a dual-convolution enhanced improved Crossformer prediction model is constructed,which employs parallel 1×1 global and 3×3 local convolutionmodules(Integrated Convolution Block,ICB)formultiscale feature extraction,combinedwith anAdaptive Spectral Block(ASB)to enhance time-series fluctuationmodeling.Based on high-precision predictions,a carbon-electricity cost joint optimization model is further designed to balance economic,environmental,and grid-friendly objectives.The model’s superiority was validated through a case study using real-world data from a renewable-heavy grid.Simulation results show that the proposed multi-objective strategy demonstrated a superior balance compared to baseline and benchmark models,achieving a 15.8%reduction in carbon emissions and a 5.2%reduction in economic costs,while still providing a substantial 22.2%reduction in the peak-valley difference.Its balanced performance significantly outperformed both a single-objective strategy and a state-of-the-art Model Predictive Control(MPC)benchmark,highlighting the advantage of a global optimization approach.This study provides theoretical and technical pathways for dynamic carbon factor-driven EV charging optimization.
基金supported by National Natural Science Foundation of China(No.52025055 and 52275571)Basic Research Operation Fund of China(No.xzy012024024).
文摘Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.
基金funded by the Science and Technology Project of State Grid Corporation of China(5108-202355437A-3-2-ZN).
文摘The increasing complexity of China’s electricity market creates substantial challenges for settlement automation,data consistency,and operational scalability.Existing provincial settlement systems are fragmented,lack a unified data structure,and depend heavily on manual intervention to process high-frequency and retroactive transactions.To address these limitations,a graph-based unified settlement framework is proposed to enhance automation,flexibility,and adaptability in electricity market settlements.A flexible attribute-graph model is employed to represent heterogeneousmulti-market data,enabling standardized integration,rapid querying,and seamless adaptation to evolving business requirements.An extensible operator library is designed to support configurable settlement rules,and a suite of modular tools—including dataset generation,formula configuration,billing templates,and task scheduling—facilitates end-to-end automated settlement processing.A robust refund-clearing mechanism is further incorporated,utilizing sandbox execution,data-version snapshots,dynamic lineage tracing,and real-time changecapture technologies to enable rapid and accurate recalculations under dynamic policy and data revisions.Case studies based on real-world data from regional Chinese markets validate the effectiveness of the proposed approach,demonstrating marked improvements in computational efficiency,system robustness,and automation.Moreover,enhanced settlement accuracy and high temporal granularity improve price-signal fidelity,promote cost-reflective tariffs,and incentivize energy-efficient and demand-responsive behavior among market participants.The method not only supports equitable and transparent market operations but also provides a generalizable,scalable foundation for modern electricity settlement platforms in increasingly complex and dynamic market environments.
基金supported by the National Natural Science Foundation of China(52471240)the Natural Science Foundation of Zhejiang Province(LZ23B030003)+2 种基金the Fundamental Research Funds for the Central Universities(226-2024-00075)support from the Engineering and Physical Sciences Research Council(EPSRC,UK)RiR grant-RIR18221018-1EU COST CA23155。
文摘The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter persistent dendrite growth and parasitic reactions,driven by the inhomogeneous charge distribution and water-dominated environment within the EDL.Compounding this,classical EDL theory,rooted in meanfield approximations,further fails to resolve molecular-scale interfacial dynamics under battery-operating conditions,limiting mechanistic insights.Herein,we established a multiscale theoretical calculation framework from single molecular characteristics to interfacial ion distribution,revealing the EDL’s structure and interactions between different ions and molecules,which helps us understand the parasitic processes in depth.Simulations demonstrate that water dipole and sulfate ion adsorption at the inner Helmholtz plane drives severe hydrogen evolution and by-product formation.Guided by these insights,we engineered a“water-poor and anion-expelled”EDL using 4,1’,6’-trichlorogalactosucrose(TGS)as an electrolyte additive.As a result,Zn||Zn symmetric cells with TGS exhibited stable cycling for over 4700 h under a current density of 1 mA cm^(−2),while NaV_(3)O_(8)·1.5H_(2)O-based full cells kept 90.4%of the initial specific capacity after 800 cycles at 5 A g^(−1).This work highlights the power of multiscale theoretical frameworks to unravel EDL complexities and guide high-performance ARZB design through integrated theory-experiment approaches.
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
文摘Rapid evolutions of the Internet of Electric Vehicles(IoEVs)are reshaping and modernizing transport systems,yet challenges remain in energy efficiency,better battery aging,and grid stability.Typical charging methods allow for EVs to be charged without thought being given to the condition of the battery or the grid demand,thus increasing energy costs and battery aging.This study proposes a smart charging station with an AI-powered Battery Management System(BMS),developed and simulated in MATLAB/Simulink,to increase optimality in energy flow,battery health,and impractical scheduling within the IoEV environment.The system operates through real-time communication,load scheduling based on priorities,and adaptive charging based on batterymathematically computed State of Charge(SOC),State of Health(SOH),and thermal state,with bidirectional power flow(V2G),thus allowing EVs’participation towards grid stabilization.Simulation results revealed that the proposed model can reduce peak grid load by 37.8%;charging efficiency is enhanced by 92.6%;battery temperature lessened by 4.4℃;SOH extended over 100 cycles by 6.5%,if compared against the conventional technique.By this way,charging time was decreased by 12.4% and energy costs dropped by more than 20%.These results showed that smart charging with intelligent BMS can boost greatly the operational efficiency and sustainability of the IoEV ecosystem.
基金supported by the National Nature Science Foundation of China(Grant No.U2034201)the key project of Science and Technology Innovation Program of Army Engineering Uni-versity(Grant No.KYCQJQZL2119)。
文摘A low-voltage ride-through(LVRT)control strategy for the multi-port power electronic transformer(PET)based on power co-regulation is proposed.During the sag and recovery of the grid-side voltage of the medium-voltage ac(MVac)port,the grid-connected active power of the low-voltage ac(LVac)port,rather than the power from external renewable energy sources(e.g.,photovoltaic(PV)),is adjusted quickly to rebalance the power flowing across all ports,thereby preventing overcurrent and overvoltage.Moreover,a power-coordinate-frame-based LVRT mode classification is designed,and a total of six LVRT modes are classified to meet the LVRT requirements in all power configuration scenarios of the PET.In this way,the PET is endowed with the LVRT capability in both power-generation and power-consumption states,which is significantly different from traditional power generation systems such as PV or wind power.Furthermore,by optimizing the active power regulation path during LVRT transition,the overcurrent problem caused by the grid-voltage sag-depth detection delay is overcome.Finally,the effectiveness of the proposed control scheme is verified by experiments on a hardware-in-the-loop platform.
基金supported by the National Natural Science Foundation of China(No.52070057)China Postdoctoral Science Foundation(No.2023M730855)Heilongjiang Postdoctoral Fund(No.LBH-Z22183)for financial support。
文摘Sustainable water,energy and food(WEF)supplies are the bedrock upon which human society depends.Solar-driven interfacial evaporation,combined with electricity generation and cultivation,is a promising approach to mitigate the freshwater,energy and food crises.However,the performance of solar-driven systems decreases significantly during operation due to uncontrollable weather.This study proposes an integrated water/electricity cogeneration-cultivation system with superior thermal management.The energy storage evaporator,consisting of energy storage microcapsules/hydrogel composites,is optimally designed for sustainable desalination,achieving an evaporation rate of around 1.91 kg m^(-2)h^(-1).In the dark,heat released from the phase-change layer supported an evaporation rate of around 0.54kg m^(-2)h^(-1).Reverse electrodialysis harnessed the salinity-gradient energy enhanced during desalination,enabling the long-running WEC system to achieve a power output of~0.3 W m^(-2),which was almost three times higher than that of conventional seawater/surface water mixing.Additionally,an integrated crop irrigation platform utilized system drainage for real-time,on-demand wheat cultivation without secondary contaminants,facilitating seamless WEF integration.This work presents a novel approach to all-day solar water production,electricity generation and crop irrigation,offering a solution and blueprint for the sustainable development of WEF.
