This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw ...This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.展开更多
We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-gener...We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-generation recycled concrete aggregates(RCA)were used to analyze the regeneration potential of RAC after F-T cycles.Scanning electron microscopy was used to study the interfacial transition zone microstructure of RAC after F-T cycles.Results showed that adding 20%FA to RAC significantly enhanced its mechanical properties and frost resistance.Before the F-T cycles,the compressive strength of RAC with 20%FA reached 48.3 MPa,exceeding research strength target of 40 MPa.A majority of second-generation RCA with FA had been verified to attain class Ⅲ,which enabled their practical application in non-structural projects such as backfill trenches and road pavement.However,the second-generation RCA with 20%FA can achieve class Ⅱ,making it ideal for 40 MPa structural concrete.展开更多
Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of re...Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.展开更多
Since 1993, China has become a net importer of energy from a net exporter. The total energy con- sumption has been greater than the total supply, and the external dependence of the energy demand increases rapidly. Ch...Since 1993, China has become a net importer of energy from a net exporter. The total energy con- sumption has been greater than the total supply, and the external dependence of the energy demand increases rapidly. China＇ s crude oil import volume and imports amount reached 253.78 million tons and 196.664 billion US dollars in 2011, with a growth rate of 6 % and 45.3 %, respectively, year-on-year. The significant increase in demand for oil and the caused structural contradictions are increasingly becoming the greatest challenge for China＇ s energy security. The energy crisis has not only touched everyone＇ s nerves, but also sparked a strong desire to find alternative energy.展开更多
This paper analyzes the distribution characteristics of geomagnetic low-value displacement in Gansu and its adjacent areas from 1995 to 2003 on the basis of the data of the daily amplitude minimum value time of the ge...This paper analyzes the distribution characteristics of geomagnetic low-value displacement in Gansu and its adjacent areas from 1995 to 2003 on the basis of the data of the daily amplitude minimum value time of the geomagnetic vertical component. It is shown that in addition to the changing rules of geomagnetic low-value displacement itself, there is a better correlation between geomagnetic low-value displacement and the occurrence of moderately strong earthquakes. There appeared to be geomagnetic low-value displacement before the moderately strong earthquakes in Gansu in the 9 years from 1995 to 2003. This result indicates that geomagnetic low-value displacement is of instructive significance for earthquake prediction to some extents.展开更多
Advances in technology make full use of recyclable material as possible, so the efficient recovery of Recyclable material can avoid a lot of energy waste. This paper takes the PET plastic bottles and waste battery as ...Advances in technology make full use of recyclable material as possible, so the efficient recovery of Recyclable material can avoid a lot of energy waste. This paper takes the PET plastic bottles and waste battery as an example, simple analyses the current situation of China＇ s processing Recyclable substance and development trend, and compared with the foreign outstanding cases, finally proposes the solution展开更多
Lithium-ion batteries(LIBs)are the most popular energy storage devices due to their high energy density,high operating voltage,and long cycle life.However,green and effective recycling methods are needed because LIBs ...Lithium-ion batteries(LIBs)are the most popular energy storage devices due to their high energy density,high operating voltage,and long cycle life.However,green and effective recycling methods are needed because LIBs contain heavy metals such as Co,Ni,and Mn and organic compounds inside,which seriously threaten human health and the environment.In this work,we review the current status of spent LIB recycling,discuss the traditional pyrometallurgical and hydrometallurgical recovery processes,and summarize the existing short-process recovery technologies such as salt-assisted roasting,flotation processes,and direct recycling.Finally,we analyze the problems and potential research prospects of the current recycling process,and point out that the multidisciplinary integration of recycling will become the mainstream technology for the development of spent LIBs.展开更多
Lithium-ion batteries(LIBs)are critical for the rapid growth of electric vehicles(EVs),but their inherent lifespan leads to numerous retirements and resource challenges.The efficacy of conventional recycling technique...Lithium-ion batteries(LIBs)are critical for the rapid growth of electric vehicles(EVs),but their inherent lifespan leads to numerous retirements and resource challenges.The efficacy of conventional recycling techniques is increasingly compromised by their high energy consumption and secondary pollution,rendering them less responsive to greener and more sustainable requirement of rapid development.Thus,the direct recycling process emerged and was considered as a more expedient and convenient method of recycling compared to the conventional recycling modes that are currently in study.However,due to the reliance on the indispensable sintering process,direct recycling still faces considerable challenges,motivating researchers to explore faster,greener,and more cost-effective strategies for LIBs recycling,Inspiringly,Joule heating recycling(JHR),an emerging technique,offers rapid,efficient impurity removal and material regeneration with minimal environmental impact,addressing limitations of existing methods.This method reduces the time for direct recycling of spent LIBs by a factor of at least three orders of magnitude and exhibits significant potential for future industrial production.Unfortunately,due to the lack of systematic organization and reporting,this next generation approach to direct recycling of spent LIBs has not yet gained much interest.To facilitate a more profound comprehension of rising flash recycling strategy,in this study,JHR is distinguished into two distinctive implementation pathways(including flash Joule heating and carbon thermal shock),designed to accommodate varying pretreatment stages and diverse spent LIBs materials.Subsequently,the advantages of the recently developed JHR of spent LIBs in terms of material performance,environmental friendliness,and economic viability are discussed in detail.Ultimately,with the goal of achieving more attractive society effects,the future direction of JHR of spent LIBs and its potential for practical application are proposed and envisaged.展开更多
Magnesium(Mg)alloys are widely used lightweight structural materials for automobiles and help reduce carbon emissions.However,their use increases the production of Mg alloy scrap,which is recycled at a much lower rate...Magnesium(Mg)alloys are widely used lightweight structural materials for automobiles and help reduce carbon emissions.However,their use increases the production of Mg alloy scrap,which is recycled at a much lower rate than aluminum,and its greater complexity poses challenges to existing recycling processes.Although vacuum distillation can be used to recycle Mg alloy scrap,this requires optimizing and maximizing metal recirculation,but there has been no thermodynamic analysis of this process.In this study,the feasibility and controllability of separating inclusions and 23 metal impurities were evaluated,and their distribution and removal limits were quantified.Thermodynamic analyses and experimental results showed that inclusions and impurity metals of separation coefficient lgβ_(i)≤-5,including Cu,Fe,Co,and Ni below 0.001 ppm,could be removed from the matrix.All Zn entered the recycled Mg,while impurities with-1<lgβ_(i)<-5 such as Li,Ca,and Mn severely affected the purity of the recycled Mg during the later stage of distillation.Therefore,an optimization strategy for vacuum distillation recycling:lower temperatures and higher system pressures for Zn separation in the early stage,and the early termination of the recovery process in the later stage or a continuous supply of raw melt can also prevent contamination during recycling.The alloying elements Al and Zn in Mg alloy scrap can be further recovered and purified by vacuum distillation when economically feasible,to maximize the recycling of metal resources.展开更多
Traditional machine learning(ML)encounters the challenge of parameter adjustment when predicting the compressive strength of reclaimed concrete.To address this issue,we introduce two optimized hybrid models:the Bayesi...Traditional machine learning(ML)encounters the challenge of parameter adjustment when predicting the compressive strength of reclaimed concrete.To address this issue,we introduce two optimized hybrid models:the Bayesian optimization model(B-RF)and the optimal model(Stacking model).These models are applied to a data set comprising 438 observations with five input variables,with the aim of predicting the compressive strength of reclaimed concrete.Furthermore,we evaluate the performance of the optimized models in comparison to traditional machine learning models,such as support vector regression(SVR),decision tree(DT),and random forest(RF).The results reveal that the Stacking model exhibits superior predictive performance,with evaluation indices including R2=0.825,MAE=2.818 and MSE=14.265,surpassing the traditional models.Moreover,we also performed a characteristic importance analysis on the input variables,and we concluded that cement had the greatest influence on the compressive strength of reclaimed concrete,followed by water.Therefore,the Stacking model can be recommended as a compressive strength prediction tool to partially replace laboratory compressive strength testing,resulting in time and cost savings.展开更多
Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may ...Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.展开更多
Recycling plastic waste into triboelectric nanogenerators(TENGs)presents a sustainable approach to energy harvesting,self-powered sensing,and environmental remediation.This study investigates the recycling of polyviny...Recycling plastic waste into triboelectric nanogenerators(TENGs)presents a sustainable approach to energy harvesting,self-powered sensing,and environmental remediation.This study investigates the recycling of polyvinyl chloride(PVC)pipe waste polymers into nanofibers(NFs)optimized for TENG applications.We focused on optimizing the morphology of recycled PVC polymer to NFs and enhancing their piezoelectric properties by incorporating ZnO nanoparticles(NPs).The optimized PVC/0.5 wt%ZnO NFs were tested with Nylon-6 NFs,and copper(Cu)electrodes.The Nylon-6 NFs exhibited a power density of 726.3μWcm^(-2)—1.13 times higher than Cu and maintained 90%stability after 172800 cycles,successfully powering various colored LEDs.Additionally,a 3D-designed device was developed to harvest energy from biomechanical movements such as finger tapping,hand tapping,and foot pressing,making it suitable for wearable energy harvesting,automatic switches,and invisible sensors in surveillance systems.This study demonstrates that recycling polymers for TENG devices can effectively address energy,sensor,and environmental challenges.展开更多
Electrical energy can be harvested from the rotational kinetic energy of moving bodies,consisting of both mechanical and kinetic energy as a potential power source through electromagnetic induction,similar to wind ene...Electrical energy can be harvested from the rotational kinetic energy of moving bodies,consisting of both mechanical and kinetic energy as a potential power source through electromagnetic induction,similar to wind energy applications.In industries,rotational bodies are commonly present in operations,yet this kinetic energy remains untapped.This research explores the energy generation characteristics of two rotational body types,disk-shaped and cylinder-shaped under specific experimental setups.The hardware setup included a direct current(DC)motor driver,power supply,DC generator,mechanical support,and load resistance,while the software setup involved automation testing tools and data logging.Electromagnetic induction was used to harvest energy,and experiments were conducted at room temperature(25℃)with controlled variables like speed and friction.Results showed the disk-shaped body exhibited higher energy efficiency than the cylinder-shaped body,largely due to lower mechanical losses.The disk required only two bearings,while the cylinder required four,resulting in lower bearing losses for the disk.Additionally,the disk experienced only air friction,whereas the cylinder encountered friction from a soft,uneven rubber material,increasing surface contact losses.Under a 40 W resistive load,the disk demonstrated a 17.1%energy loss due to mechanical friction,achieving up to 15.55 J of recycled energy.Conversely,the cylinder body experienced a 48.05%energy loss,delivering only 51.95%of energy to the load.These insights suggest significant potential for designing efficient energy recycling systems in industrial settings,particularly in manufacturing and processing industries where rotational machinery is prevalent.Despite its lower energy density,this system could be beneficially integrated with energy storage solutions,enhancing sustainability in industrial practices.展开更多
The use of recycled concrete and oyster shells as partial cement and aggregate replacements is ongoing research to solve this multifaceted problem of concrete waste in the construction industry as well as waste from o...The use of recycled concrete and oyster shells as partial cement and aggregate replacements is ongoing research to solve this multifaceted problem of concrete waste in the construction industry as well as waste from oyster shell farming. However, there is a lack of evidence on the possibility of producing a fully recycled composite consisting of recycled concrete and oyster shell without the need for new cement and natural aggregates. In this study, recycled concrete powder (RCP) and oyster shell were used to produce a green composite. Separate ground and combined ground (separate ground and co-ground) RCP and oyster shells are used to determine the effects of grinding approaches on the mechanical and chemical properties of the composite. The composite samples were molded via press molding by applying 30 MPa of pressure for 10 minutes. The results revealed that the composite prepared via the combined ground approach presented the highest flexural strength compared to the separate ground and unground samples. The FTIR and XRD characterization results revealed no chemical or phase alterations in the raw materials or the resulting composites before and after grinding. SEM analysis revealed that combined grinding reduced the particles’ size and improved the dispersion of the mixture, thereby increasing the strength.展开更多
With the increasing consumption of non renewable resources such as oil,the traditional polymer manufacturing industry that relies on fossil resources is facing unprecedented challenges.The design,synthesis,and recycli...With the increasing consumption of non renewable resources such as oil,the traditional polymer manufacturing industry that relies on fossil resources is facing unprecedented challenges.The design,synthesis,and recycling of renewable and environmentally friendly bio-based polymers as alternatives to petroleum based polymers have become hot topics in research and industrial fields.Biomass has been used as a raw material to design and synthesize closed-loop recyclable polymers,which is of great significance in addressing the waste of resources and negative impact on the environment in the traditional polymer preparation process.This review summarized recent advances in the design,synthesis,and properties of closed-loop recyclable bio-based polymers,focusing on the sustainability and recyclability of bio-based materials,followed by a brief discussion of the potential applications of closed-loop recyclable bio-based polymers in emerging applications such as 3D printing and friction electric nanogenerators.In addition,perspectives and recommendations for future research on closedloop recyclable bio-based polymers were presented.展开更多
Based on the concept of sustainable design,we are committed to seeking innovative solutions and designinga complete express packaging recycling machine.The device consists of a vibration device,a compression device,a ...Based on the concept of sustainable design,we are committed to seeking innovative solutions and designinga complete express packaging recycling machine.The device consists of a vibration device,a compression device,a winding device and an electronic control system to promote the recycling of resources and environmental protection.This device can further improve the recycling efficiency and feasibility.It provides new ideas and solutions for the express industry and promotes the development of sustainable design in the field of express packaging recycling and reuse devices.展开更多
Exploring alternative aggregates or recycled aggregates to substitute traditional concrete aggregates,particularly sand aggregates,which are becoming more limited and must comply with environmental protection standard...Exploring alternative aggregates or recycled aggregates to substitute traditional concrete aggregates,particularly sand aggregates,which are becoming more limited and must comply with environmental protection standards,is essential.Research has explored various alternative materials to sand in concrete,including concrete from demolished buildings,and broken glass from projects,among others.Investigating the use of recycled broken glass to substitute sand aggregates and implementing this research in compression columns is crucial.This paper examines the compressive behavior of reinforced concrete columns that utilize recycled glass particles as a substitute for sand in concrete.The research findings establish the relationships:load and vertical displacement,load and deformation at the column head,mid-column,and column base;the formation and propagation of cracks in the column,while considering factors such as the percentage of recycled glass,the arrangement of stirrups,and the amount of load-bearing steel influencing the performance of square reinforced concrete columns under compression.The feasibility of using recycled glass as a substitute for sand in column structures subjected to compression has been demonstrated,with the ideal replacement content for sand aggregate in reinforced concrete columns in this study ranging from 0%to 10%.The column’s load-bearing ability dropped from 250 kN to 150 kN when 100%recycled glass was used instead of sand.This is a 40%drop,and cracks started to show up sooner.The research will support recycling broken glass instead of using sand in building,improving the environment and reducing natural sand use.展开更多
Electroplating sludge(ES),a byproduct of the electroplating industry,is a significant environmental concern due to its high content of soluble heavy metals(HMs).The significance of spinel formation from ES lies in its...Electroplating sludge(ES),a byproduct of the electroplating industry,is a significant environmental concern due to its high content of soluble heavy metals(HMs).The significance of spinel formation from ES lies in its potential for HMs enrichment and environmental remediation,offering a sustainable solution for hazardous waste management.The article delves into themultifaceted recycling of HMs-rich spinel fromES,encompassing its synthesis,metal enrichment,and thermodynamic stability.The pyro-metallurgical and hydrometallurgical processes for spinel synthesis were discussed,with a focus on the critical role of thermodynamic data in predicting the stability and formation of spinel structures.The crystallographic and magnetic properties of spinels,with their applications in environmental remediation and energy storage are highlighted.The article provides a comprehensive reviewon the recycling of HMs-rich spinel fromES,offering a means to recycle HMs,mitigate ecological harm,and contribute to a circular economy through the recovery and application of valuable materials.The selective leaching of metals from ES also faces challenges,which was limited by the separation,purification steps and high energy consumption.This high energy consumption is a significant operational cost and also contributes to environmental concerns related to carbon emissions.It is essential to address the challenges through continued research and development,improved technologies,and supportive regulatory frameworks.展开更多
Poly(L-lactide)(PLLA)is one of the best candidates as a bio-based plastic material for circular economy because of its biodegradability sustainability,recyclability,and good thermal and mechanical properties.The indus...Poly(L-lactide)(PLLA)is one of the best candidates as a bio-based plastic material for circular economy because of its biodegradability sustainability,recyclability,and good thermal and mechanical properties.The industrial production of PLLA is mainly from tin(II)_(2)-ethylhexanoate[Sn(Oct)_(2)]-catalyzed ring-opening polymerization(ROP)of L-LA in melt and bulk conditions at high temperatures(150-200℃).Despite the huge efforts devoted to the development of organometallics with low toxicity and many highly active catalysts under mild laboratory conditions,very few candidates can compete with Sn(Oct)_(2) under industrially relevant conditions.Herein,we report novel zinc complexes bearing phenylimino-pyridine-phenolate ligands as efficient catalysts for L-LA polymerization under both mild and industrially relevant conditions,with a turnover frequency as high as 6200 h^(-1).The best performing catalyst competed well with Sn(Oct)_(2) under industrial conditions and afforded colorless and semicrystalline PLLA.In addition,preliminary depolymerization experiments suggested that the new catalysts can also be used for the chemical recycling of commercial PLLA directly to L-LA with high selectivity under bulk and melt conditions.展开更多
The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing ad...The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.展开更多
基金Funded by the Science and Technology Program of Gansu Province(Nos.25JRRA497,23ZDFA017)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0950000)High-level Talent Funding of Kashi。
文摘This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.
基金Funded by the Natural Science Foundation of Jiangsu Province(No.BK20220626)the National Natural Science Foundation of China(No.52078068)+2 种基金Science and Technology Innovation Foundation of NIT(No.KCTD006)Jiangsu Marine Structure Service Performance Improvement Engineering Research CenterKey Laboratory of Jiangsu"Marine Floating Wind Power Technology and Equipment"。
文摘We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-generation recycled concrete aggregates(RCA)were used to analyze the regeneration potential of RAC after F-T cycles.Scanning electron microscopy was used to study the interfacial transition zone microstructure of RAC after F-T cycles.Results showed that adding 20%FA to RAC significantly enhanced its mechanical properties and frost resistance.Before the F-T cycles,the compressive strength of RAC with 20%FA reached 48.3 MPa,exceeding research strength target of 40 MPa.A majority of second-generation RCA with FA had been verified to attain class Ⅲ,which enabled their practical application in non-structural projects such as backfill trenches and road pavement.However,the second-generation RCA with 20%FA can achieve class Ⅱ,making it ideal for 40 MPa structural concrete.
基金Funded by Natural Science Foundation of Guangxi(No.2025GXNSFBA069565)Guangxi Science and Technology Program(No.AD25069101)Guangxi Bagui Scholars Fund。
文摘Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.
文摘Since 1993, China has become a net importer of energy from a net exporter. The total energy con- sumption has been greater than the total supply, and the external dependence of the energy demand increases rapidly. China＇ s crude oil import volume and imports amount reached 253.78 million tons and 196.664 billion US dollars in 2011, with a growth rate of 6 % and 45.3 %, respectively, year-on-year. The significant increase in demand for oil and the caused structural contradictions are increasingly becoming the greatest challenge for China＇ s energy security. The energy crisis has not only touched everyone＇ s nerves, but also sparked a strong desire to find alternative energy.
基金sponsored by the Natural Science Foundation of Gansu Province (3ZS061-A25-008),China
文摘This paper analyzes the distribution characteristics of geomagnetic low-value displacement in Gansu and its adjacent areas from 1995 to 2003 on the basis of the data of the daily amplitude minimum value time of the geomagnetic vertical component. It is shown that in addition to the changing rules of geomagnetic low-value displacement itself, there is a better correlation between geomagnetic low-value displacement and the occurrence of moderately strong earthquakes. There appeared to be geomagnetic low-value displacement before the moderately strong earthquakes in Gansu in the 9 years from 1995 to 2003. This result indicates that geomagnetic low-value displacement is of instructive significance for earthquake prediction to some extents.
文摘Advances in technology make full use of recyclable material as possible, so the efficient recovery of Recyclable material can avoid a lot of energy waste. This paper takes the PET plastic bottles and waste battery as an example, simple analyses the current situation of China＇ s processing Recyclable substance and development trend, and compared with the foreign outstanding cases, finally proposes the solution
基金financial support by the National Natural Science Foundation of China(No.52374293)Zhongyuan Science and Technology Innovation Leading Talent Project,China(No.224200510025)+1 种基金the Science and Technology Innovation Program of Hunan Province,China(No.2022RC1123)One of the authors,Hong-bo ZENG,gratefully acknowledges the support from the Natural Sciences and Engineering Research Council of Canada(NSERC)and the Canada Research Chairs Program.
文摘Lithium-ion batteries(LIBs)are the most popular energy storage devices due to their high energy density,high operating voltage,and long cycle life.However,green and effective recycling methods are needed because LIBs contain heavy metals such as Co,Ni,and Mn and organic compounds inside,which seriously threaten human health and the environment.In this work,we review the current status of spent LIB recycling,discuss the traditional pyrometallurgical and hydrometallurgical recovery processes,and summarize the existing short-process recovery technologies such as salt-assisted roasting,flotation processes,and direct recycling.Finally,we analyze the problems and potential research prospects of the current recycling process,and point out that the multidisciplinary integration of recycling will become the mainstream technology for the development of spent LIBs.
基金financially supported by the National Key Research and Development Program of China(No.2023YFC3904800)the National Outstanding Young Scientists Fund(No.5a2125002)+7 种基金the National Science Foundation of China(No.22476073)the Key Project of Jiangxi Provincial Research and Development Program(Nos.20223BBG74006 and 20243BBI91001)the China Postdoctoral Science Foundation(No.2024M751282)the “Thousand Talents Program”of Jiangxi Province(S_(2)021GDQN2161)the Key Project of Ganzhou City Research and Development Program(No.2023PGX17350)the Science&Technology Talent Lifting Project of Hunan Province(No.2022TJ-N16)the Natural Science Foundation of Hunan Province China(No.2024JJ4022,2023JJ30277)the Open-End Fund for National-Local Joint Engineering Research Center of Heavy Metals Pollutants Control and Resource Utilization(ES_(2)02480184)。
文摘Lithium-ion batteries(LIBs)are critical for the rapid growth of electric vehicles(EVs),but their inherent lifespan leads to numerous retirements and resource challenges.The efficacy of conventional recycling techniques is increasingly compromised by their high energy consumption and secondary pollution,rendering them less responsive to greener and more sustainable requirement of rapid development.Thus,the direct recycling process emerged and was considered as a more expedient and convenient method of recycling compared to the conventional recycling modes that are currently in study.However,due to the reliance on the indispensable sintering process,direct recycling still faces considerable challenges,motivating researchers to explore faster,greener,and more cost-effective strategies for LIBs recycling,Inspiringly,Joule heating recycling(JHR),an emerging technique,offers rapid,efficient impurity removal and material regeneration with minimal environmental impact,addressing limitations of existing methods.This method reduces the time for direct recycling of spent LIBs by a factor of at least three orders of magnitude and exhibits significant potential for future industrial production.Unfortunately,due to the lack of systematic organization and reporting,this next generation approach to direct recycling of spent LIBs has not yet gained much interest.To facilitate a more profound comprehension of rising flash recycling strategy,in this study,JHR is distinguished into two distinctive implementation pathways(including flash Joule heating and carbon thermal shock),designed to accommodate varying pretreatment stages and diverse spent LIBs materials.Subsequently,the advantages of the recently developed JHR of spent LIBs in terms of material performance,environmental friendliness,and economic viability are discussed in detail.Ultimately,with the goal of achieving more attractive society effects,the future direction of JHR of spent LIBs and its potential for practical application are proposed and envisaged.
文摘Magnesium(Mg)alloys are widely used lightweight structural materials for automobiles and help reduce carbon emissions.However,their use increases the production of Mg alloy scrap,which is recycled at a much lower rate than aluminum,and its greater complexity poses challenges to existing recycling processes.Although vacuum distillation can be used to recycle Mg alloy scrap,this requires optimizing and maximizing metal recirculation,but there has been no thermodynamic analysis of this process.In this study,the feasibility and controllability of separating inclusions and 23 metal impurities were evaluated,and their distribution and removal limits were quantified.Thermodynamic analyses and experimental results showed that inclusions and impurity metals of separation coefficient lgβ_(i)≤-5,including Cu,Fe,Co,and Ni below 0.001 ppm,could be removed from the matrix.All Zn entered the recycled Mg,while impurities with-1<lgβ_(i)<-5 such as Li,Ca,and Mn severely affected the purity of the recycled Mg during the later stage of distillation.Therefore,an optimization strategy for vacuum distillation recycling:lower temperatures and higher system pressures for Zn separation in the early stage,and the early termination of the recovery process in the later stage or a continuous supply of raw melt can also prevent contamination during recycling.The alloying elements Al and Zn in Mg alloy scrap can be further recovered and purified by vacuum distillation when economically feasible,to maximize the recycling of metal resources.
基金Funded by China National Key Research and Development Program for Application and Verification of Typical Groundwater Contaminated Sites(No.2019YFC1804805)Shenyang Key Laboratory of Safety Evaluation and Disaster Prevention of Engineering Structures(No.S230184)the Funding Project of Northeast Geological S&T Innovation Center of China Geological Survey(No.QCJJ2023-39)。
文摘Traditional machine learning(ML)encounters the challenge of parameter adjustment when predicting the compressive strength of reclaimed concrete.To address this issue,we introduce two optimized hybrid models:the Bayesian optimization model(B-RF)and the optimal model(Stacking model).These models are applied to a data set comprising 438 observations with five input variables,with the aim of predicting the compressive strength of reclaimed concrete.Furthermore,we evaluate the performance of the optimized models in comparison to traditional machine learning models,such as support vector regression(SVR),decision tree(DT),and random forest(RF).The results reveal that the Stacking model exhibits superior predictive performance,with evaluation indices including R2=0.825,MAE=2.818 and MSE=14.265,surpassing the traditional models.Moreover,we also performed a characteristic importance analysis on the input variables,and we concluded that cement had the greatest influence on the compressive strength of reclaimed concrete,followed by water.Therefore,the Stacking model can be recommended as a compressive strength prediction tool to partially replace laboratory compressive strength testing,resulting in time and cost savings.
基金Project(2024JJ2073)supported by the Science Fund for Distinguished Young Scholars of Hunan Province,ChinaProjects(2023YFC3807205,2019YFC1904704)+4 种基金supported by the National Key R&D Program of ChinaProject(52178443)supported by the National Natural Science Foundation of ChinaProject(2024ZZTS0109)supported by Fundamental Research Funds for the Central Universities of Central South University,China。
文摘Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.
基金supported by the research projects AP23486880 from the Ministry of Higher EducationScience of the Republic of Kazakhstan and 111024CRP2010,20122022FD4135 from Nazarbayev University.
文摘Recycling plastic waste into triboelectric nanogenerators(TENGs)presents a sustainable approach to energy harvesting,self-powered sensing,and environmental remediation.This study investigates the recycling of polyvinyl chloride(PVC)pipe waste polymers into nanofibers(NFs)optimized for TENG applications.We focused on optimizing the morphology of recycled PVC polymer to NFs and enhancing their piezoelectric properties by incorporating ZnO nanoparticles(NPs).The optimized PVC/0.5 wt%ZnO NFs were tested with Nylon-6 NFs,and copper(Cu)electrodes.The Nylon-6 NFs exhibited a power density of 726.3μWcm^(-2)—1.13 times higher than Cu and maintained 90%stability after 172800 cycles,successfully powering various colored LEDs.Additionally,a 3D-designed device was developed to harvest energy from biomechanical movements such as finger tapping,hand tapping,and foot pressing,making it suitable for wearable energy harvesting,automatic switches,and invisible sensors in surveillance systems.This study demonstrates that recycling polymers for TENG devices can effectively address energy,sensor,and environmental challenges.
基金The APC was funded by Research Management Center, Multimedia University, Malaysia.
文摘Electrical energy can be harvested from the rotational kinetic energy of moving bodies,consisting of both mechanical and kinetic energy as a potential power source through electromagnetic induction,similar to wind energy applications.In industries,rotational bodies are commonly present in operations,yet this kinetic energy remains untapped.This research explores the energy generation characteristics of two rotational body types,disk-shaped and cylinder-shaped under specific experimental setups.The hardware setup included a direct current(DC)motor driver,power supply,DC generator,mechanical support,and load resistance,while the software setup involved automation testing tools and data logging.Electromagnetic induction was used to harvest energy,and experiments were conducted at room temperature(25℃)with controlled variables like speed and friction.Results showed the disk-shaped body exhibited higher energy efficiency than the cylinder-shaped body,largely due to lower mechanical losses.The disk required only two bearings,while the cylinder required four,resulting in lower bearing losses for the disk.Additionally,the disk experienced only air friction,whereas the cylinder encountered friction from a soft,uneven rubber material,increasing surface contact losses.Under a 40 W resistive load,the disk demonstrated a 17.1%energy loss due to mechanical friction,achieving up to 15.55 J of recycled energy.Conversely,the cylinder body experienced a 48.05%energy loss,delivering only 51.95%of energy to the load.These insights suggest significant potential for designing efficient energy recycling systems in industrial settings,particularly in manufacturing and processing industries where rotational machinery is prevalent.Despite its lower energy density,this system could be beneficially integrated with energy storage solutions,enhancing sustainability in industrial practices.
文摘The use of recycled concrete and oyster shells as partial cement and aggregate replacements is ongoing research to solve this multifaceted problem of concrete waste in the construction industry as well as waste from oyster shell farming. However, there is a lack of evidence on the possibility of producing a fully recycled composite consisting of recycled concrete and oyster shell without the need for new cement and natural aggregates. In this study, recycled concrete powder (RCP) and oyster shell were used to produce a green composite. Separate ground and combined ground (separate ground and co-ground) RCP and oyster shells are used to determine the effects of grinding approaches on the mechanical and chemical properties of the composite. The composite samples were molded via press molding by applying 30 MPa of pressure for 10 minutes. The results revealed that the composite prepared via the combined ground approach presented the highest flexural strength compared to the separate ground and unground samples. The FTIR and XRD characterization results revealed no chemical or phase alterations in the raw materials or the resulting composites before and after grinding. SEM analysis revealed that combined grinding reduced the particles’ size and improved the dispersion of the mixture, thereby increasing the strength.
基金Natural Science Foundation of China(Grant Nos.32471815 and 32401528)Natural Science Foundation of Jiangsu Province of China(Grant Nos.BK20241745 and BK20240294).
文摘With the increasing consumption of non renewable resources such as oil,the traditional polymer manufacturing industry that relies on fossil resources is facing unprecedented challenges.The design,synthesis,and recycling of renewable and environmentally friendly bio-based polymers as alternatives to petroleum based polymers have become hot topics in research and industrial fields.Biomass has been used as a raw material to design and synthesize closed-loop recyclable polymers,which is of great significance in addressing the waste of resources and negative impact on the environment in the traditional polymer preparation process.This review summarized recent advances in the design,synthesis,and properties of closed-loop recyclable bio-based polymers,focusing on the sustainability and recyclability of bio-based materials,followed by a brief discussion of the potential applications of closed-loop recyclable bio-based polymers in emerging applications such as 3D printing and friction electric nanogenerators.In addition,perspectives and recommendations for future research on closedloop recyclable bio-based polymers were presented.
基金Yingkou Institute of Technology school level scientificresearch project(Grant:ZDIL202302).
文摘Based on the concept of sustainable design,we are committed to seeking innovative solutions and designinga complete express packaging recycling machine.The device consists of a vibration device,a compression device,a winding device and an electronic control system to promote the recycling of resources and environmental protection.This device can further improve the recycling efficiency and feasibility.It provides new ideas and solutions for the express industry and promotes the development of sustainable design in the field of express packaging recycling and reuse devices.
文摘Exploring alternative aggregates or recycled aggregates to substitute traditional concrete aggregates,particularly sand aggregates,which are becoming more limited and must comply with environmental protection standards,is essential.Research has explored various alternative materials to sand in concrete,including concrete from demolished buildings,and broken glass from projects,among others.Investigating the use of recycled broken glass to substitute sand aggregates and implementing this research in compression columns is crucial.This paper examines the compressive behavior of reinforced concrete columns that utilize recycled glass particles as a substitute for sand in concrete.The research findings establish the relationships:load and vertical displacement,load and deformation at the column head,mid-column,and column base;the formation and propagation of cracks in the column,while considering factors such as the percentage of recycled glass,the arrangement of stirrups,and the amount of load-bearing steel influencing the performance of square reinforced concrete columns under compression.The feasibility of using recycled glass as a substitute for sand in column structures subjected to compression has been demonstrated,with the ideal replacement content for sand aggregate in reinforced concrete columns in this study ranging from 0%to 10%.The column’s load-bearing ability dropped from 250 kN to 150 kN when 100%recycled glass was used instead of sand.This is a 40%drop,and cracks started to show up sooner.The research will support recycling broken glass instead of using sand in building,improving the environment and reducing natural sand use.
基金supported by the National Natural Science Foundation of China(Nos.52370158 and 22006053)Guangzhou Science and Technology Plan Project(No.2024A04J0821)Guangdong Provincial Education Science Planning Project(Higher Education Special Project)(No.2023GXJK108).
文摘Electroplating sludge(ES),a byproduct of the electroplating industry,is a significant environmental concern due to its high content of soluble heavy metals(HMs).The significance of spinel formation from ES lies in its potential for HMs enrichment and environmental remediation,offering a sustainable solution for hazardous waste management.The article delves into themultifaceted recycling of HMs-rich spinel fromES,encompassing its synthesis,metal enrichment,and thermodynamic stability.The pyro-metallurgical and hydrometallurgical processes for spinel synthesis were discussed,with a focus on the critical role of thermodynamic data in predicting the stability and formation of spinel structures.The crystallographic and magnetic properties of spinels,with their applications in environmental remediation and energy storage are highlighted.The article provides a comprehensive reviewon the recycling of HMs-rich spinel fromES,offering a means to recycle HMs,mitigate ecological harm,and contribute to a circular economy through the recovery and application of valuable materials.The selective leaching of metals from ES also faces challenges,which was limited by the separation,purification steps and high energy consumption.This high energy consumption is a significant operational cost and also contributes to environmental concerns related to carbon emissions.It is essential to address the challenges through continued research and development,improved technologies,and supportive regulatory frameworks.
基金supported by the National Natural Science Foundation of China(No.52222302)。
文摘Poly(L-lactide)(PLLA)is one of the best candidates as a bio-based plastic material for circular economy because of its biodegradability sustainability,recyclability,and good thermal and mechanical properties.The industrial production of PLLA is mainly from tin(II)_(2)-ethylhexanoate[Sn(Oct)_(2)]-catalyzed ring-opening polymerization(ROP)of L-LA in melt and bulk conditions at high temperatures(150-200℃).Despite the huge efforts devoted to the development of organometallics with low toxicity and many highly active catalysts under mild laboratory conditions,very few candidates can compete with Sn(Oct)_(2) under industrially relevant conditions.Herein,we report novel zinc complexes bearing phenylimino-pyridine-phenolate ligands as efficient catalysts for L-LA polymerization under both mild and industrially relevant conditions,with a turnover frequency as high as 6200 h^(-1).The best performing catalyst competed well with Sn(Oct)_(2) under industrial conditions and afforded colorless and semicrystalline PLLA.In addition,preliminary depolymerization experiments suggested that the new catalysts can also be used for the chemical recycling of commercial PLLA directly to L-LA with high selectivity under bulk and melt conditions.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2022MB034)。
文摘The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.
