This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-perform...Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.展开更多
Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Her...Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Herein,with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern,the electronic structure is theoretically illustrated by the first-principles density functional theory calculations,suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI.It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal orbital Hamiltonian group analysis.The calculations of reaction free energy changes indicate that the oxygen evolution reaction should follow the reaction pathway of H_(2)O→^(*)OH→^(*)O→^(*)OOH→^(*)O_(2)with an overpotential of 0.81 V.Through an in-depth theoretical computational analysis in the atomic and electronic structures,the origin of photocatalytic oxygen evolution activity for PDI is well illustrated,which would help the rational design and modification of polymeric photocatalysts for efficient oxygen evolution.展开更多
It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(...It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active sites.The co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,respectively.The mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature OCM.It is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.展开更多
Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still r...Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still remains a great challenge.In this work,Fe atom clusters(Fe_(AC))modified by high-density Cu single atoms(Cu_(SA))in a N,S-doped porous carbon substrate(Fe_(AC)/Cu_(SA)@NCS)is reported for enhanced ORR electrocatalysis.Fe_(AC)/Cu_(SA)@NCS exhibits excellent ORR performance with a half-wave potential(E_(1/2))of 0.911 V,a high four-electron process selectivity and excellent stability.The ORR performance is also verified in the Fe_(AC)/Cu_(SA)@NCS-based Zn-air battery,which shows a high peak power density of 192.67 mW cm^(-2),a higher specific capacity of 808.3 mAh g^(-1)and impressive charge-discharge cycle stability.Moreover,density functional theory calculations show that Cu single atoms synergistically modulate the electronic structure Fe active atoms in Fe atomic clusters,reducing the energy barrier of the rate-determining step(i.e.,*OH desorption)on Fe_(AC)/Cu_(SA)@NCS.This work provides an effective way to regulate the electronic structure of Fe-based catalysts and optimize their electrocatalytic activity based on the introduction of a second metal source.展开更多
Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O...Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O-Ir motifs are engineered into CuO nanowires via cation exchange and dehydration to elucidate the OER mechanism.Systematic characterizations confirm the atomic dispersion of Ir within the CuO lattice and the electron transfer from Ir to CuO while preserving the host structure.The asprepared single-atom Ir-doped CuO(IrSA-CuO),featuring predominant Cu-O-Ir motifs and coexisting IrO-Ir motifs,achieves a low OER overpotential of 204 mV at 10 mA cm^(-2)in 1 M KOH,coupled with a 69-fold higher mass activity than commercial IrO_(2).Furthermore,the Ir_(SA)-CuO maintains long-term stability for 300 h at 200 mA cm^(-2)with minimal overpotential alteration and an additional 120 h at500 mA cm^(-2)with overpotential increased by 15 mV.In situ Raman spectroscopy reveals that the Ir-O-Ir motifs suppress Cu^(Ⅱ) oxidation to Cu^(Ⅲ) by delaying the onset potential,enhancing the structural stability during OER.Density functional theory calculations demonstrate the Cu-O-Ir motifs lower the adsorption energy of bridged ^(*)O via asymmetric bonding,accelerating ^(*)OOH formation in the ratedetermining step.This work presents a heteroatom engineering strategy to balance electrocatalytic activity and durability,providing a blueprint for industrial electrocatalyst design.展开更多
The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt...The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.展开更多
Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversibl...Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversible electrochemical reactions,posing a significant challenge.To overcome these challenges,atomic heterostructures are employed to address the structural instability and enhance the mass/charge transfer dynamics associated with phase conversion mechanism in aqueous electrodes,Herein,we introduce an atomic S-Bi_(2)O_(3)heterostructure(sulfur(S)anchoring on the surface Ovof Bi_(2)O_(3)).The integration of S within Bi_(2)O_(3)lattice matrix triggers a charge imbala nce at the heterointerfaces,ultimately resulting in the creation of a built-in electric field(BEF).Thus,the BEF attracts OH-ions to be adsorbed onto Bi within the regions of high electron cloud overlap in S-Bi_(2)O_(3),facilitating highly efficient charge transfer.Furthermore,the anchored S plays a pivotal role in preserving structural integrity,thus effectively stabilizing the phase conversion reaction of Bi_(2)O_(3).As a result,the S-Bi_(2)O_(3)electrode achieves72.3 mA h g^(-1)at 10 A g^(-1)as well as high-capacity retention of 81.9%after 1600 cycles.Our innovative SBi_(2)O_(3)design presents a groundbreaking approach for fabricating electrodes that exhibit efficient and stable mass and charge transfer capabilities.Furthermore,it enhances our understanding of the underlying reaction mechanism within energy storage electrodes.展开更多
The advancement of efficient,cheap,and durable catalysts for oxygen reduction reaction(ORR)to substitute Pt/C in metal-air batteries is of paramount importance.However,traditional solvent-based methods fall short in t...The advancement of efficient,cheap,and durable catalysts for oxygen reduction reaction(ORR)to substitute Pt/C in metal-air batteries is of paramount importance.However,traditional solvent-based methods fall short in terms of environmental benign and scalability.Herein,a solvent-free organic-inorganic selfassembly approach is explored to construct cobalt single atom and cobalt nanocluster decorated nitrogendoped porous carbon spheres(Co-SA/NC@NCS).The solvent-free synthesis demonstrates an impressively high yield(282 g/L)and the resultant Co-SA/NC@NCS possesses a high N content(6.9 wt%).Density functional theory calculations disclose that the Co-SAs and Co-NCs are able to optimize the surface oxygen adsorption capability and enhance the conductivity of the NCS,thereby facilitating the ORR performance.The sol vent-free synthesis is also feasible for the synthesis of other non-noble metal element(Fe,Ni,and Zn)decorated nitrogen-doped porous carbon spheres.展开更多
Concurrent activation of lattice oxygen(O_L)and molecular oxygen(O_(2))is crucial for the efficient catalytic oxidation of biomass-derived molecules over metal oxides.Herein,we report that the introduction of ultralow...Concurrent activation of lattice oxygen(O_L)and molecular oxygen(O_(2))is crucial for the efficient catalytic oxidation of biomass-derived molecules over metal oxides.Herein,we report that the introduction of ultralow-loading of Ru single atoms(0.42 wt%)into Mn_(2)O_(3)matrix(0.4%Ru-Mn_(2)O_(3))greatly boosts its catalytic activity for the aerobic oxidation of 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA).The FDCA productivity over the 0.4%Ru-Mn_(2)O_(3)(5.4 mmol_(FDCA)g_(cat)h^(-1))is 4.9 times higher than the Mn_(2)O_(3).Especially,this FDCAproductivity is also significantly higher than that of existing Ru and Mn-based catalysts.Experimental and theoretical investigations discovered that the Ru single atom facilitated the formation of oxygen vacancy(O_(v))in the catalyst,which synergistically weakened the Mn-O bond and promoted the activation of O_L.The co-presence of Ru single atoms and O_(v)also promote the adsorption and activation of both O_(2)and HMF.Consequently,the dehydrogenation reaction energy barrier of the rate-determining step was reduced via both the O_L and chemisorbed O_(2)dehydrogenation pathways,thus boosting the catalytic oxidation reactions.展开更多
The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(F...The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.展开更多
The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challen...The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challenging.Herein,N-doped carbon(N-C)anchored atomically dispersed Ni-N_(3)site with proximity defects(Ni-N_(3)D)induced by Te atoms doping is reported.Benefitting from the inductive effect of proximity defect,the Ni-N_(3)D/Te-N-C catalyst performs excellent ORR and HER performance in alkaline and acid condition.Both in situ characterization and theoretical calculation reveal that the existence of proximity defect effect is conducive to lower rate-determining-step energy barrier of ORR and HER,thus accelerating the multielectron reaction kinetics.This work paves a novel strategy for constructing highactivity bifunctional SACs by defect engineering for development of sustainable energy.展开更多
Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphol...Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphology and surface chemical composi- tions have been examined by scanning electron microscope （SEM） and X-ray photoelectron spectroscopy （XPS） after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples＇ surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the re- action rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.展开更多
Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In...Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In2O3：Sn （ITO） thin films have been widely used and investigated. In this study, ZAO and ITO thin films were irradiated by AO with different amounts of fluence. The as-deposited samples and irradiated ones were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Hall-effect measurement to investigate the dependence of the structure, morphology and electrical properties of ZAO or ITO on the amount of fluence of AO irradiation. It is noticed that AO has erosion effects on the surface of ZAO without evident influences upon its structure and conductive properties. Moreover, as the amount of AO fluence rises, the carrier concentration of ITO decreases causing the resistivity to increase by at most 21.7%.展开更多
In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600...In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600 W was launched into the circular cavity to generate ECR (electron cyclotron resonance) plasma. The oxygen ion beam moved onto a negatively biased Mo plate under the condition of symmetry magnetic mirror field confine, then was neutralized and reflected to form oxygen atom beam. The properties of plasma density, electron temperature, plasma space potential and ion incident energy were characterized. The atomic oxygen beam flux was calibrated by measuring the mass loss rate of Kapton during the atomic oxygen exposure. The test results show that the atomic oxygen beam with flux of 1016-1017 atoms-cm-2·s-1 and energy of 5-30 eV and a cross section of φ80 mm could be obtained under the operating pressure of 10-1-10-3 Pa. Such a high flux source can provide accelerated simulation tests of materials and coatings for space applications.展开更多
Single-atom catalysts (SACs) supported on two-dimensional (2D) materials are highly attractive for maximizing their catalytic activity.However,graphene based SACs are primarily bonded with nitrogen and carbon sites,re...Single-atom catalysts (SACs) supported on two-dimensional (2D) materials are highly attractive for maximizing their catalytic activity.However,graphene based SACs are primarily bonded with nitrogen and carbon sites,resulting in poor performance for the oxygen evolution reaction (OER).Herein,we develop a general bimetal-ion adsorption strategy for the synthesis of individually dispersed Ni SACs anchored on the oxygenated sites of ultrathin reduced graphene oxide as efficient OER electrocatalysts.The resultant Ni SACs for OER in alkaline electrolyte exhibit a highly stable overpotential of 328 mV at the current density of 10 mA cm^-2,and Tafel slope of 84 mV dec^-1 together with long-term durability and negligible degradation for 50 h,which is greatly outperform its counterparts of nitrogen bonded Ni SACs (564 mV,364 mV dec^-1) and Ni(OH)2 nanoparticles anchored on graphene (450 mV,142 mV dec^-1),and most reported Ni based OER electrocatalysts.Furthermore,the extended X-ray absorption fine structure at the Ni K-edge and theoretical simulation reveal that the nickel-oxygen coordination significantly boost OER performance.Therefore,this work will open numerous opportunities for creating novel-type 2D SACs via oxygen-metal bonding as highly robust OER catalysts.展开更多
Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facili...Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facility. The samples before and after the experiments arecompared in appearance, mass, optical properties and surface composition. The reactioncharacteristics of Teflon are summarized and the reaction mechanisms are analyzed. The followingconclusion can be drawn: at the action of VUV the Teflon sample surface is darkened for theaccumulation of carbon; and when the sample is exposed to AO, the carbon is oxidized and thedarkening surface is bleached; the synergistic effects of VUV and AO may cause the erosion of Teflonmore severe.展开更多
Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces...Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.展开更多
The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were i...The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results indicated that Kapton underwent dramatically degradation, including much mass loss and change of surface morphologies; vacuum outgassing effect of Kapton was the key factor for initial mass loss in the course of atomic oxygen beam exposures. XPS analysis showed that the carbonyl group in Kapton reacted with oxygen atoms to generate CO2, then CO2 desorbed from Kapton surface. In addition, PMDA in the polyimide structure degraded due to the reaction with atomic oxygen of 5 eV.展开更多
Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-suppo...Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-supported Pt nanoparticles(Pt/CNT)are prepared by both atomic layer deposition(ALD)and impregnation methods.The performances of the catalysts toward the ORR in acidic media are comparatively studied to probe the effects of the sizes of the Pt nanoparticles together with their distributions,electronic properties,and local environments.The ALD-Pt/CNT catalysts show much higher ORR activity and selectivity than the impregnation-Pt/CNT catalysts.This outstanding ORR performance is ascribed to the well-controlled Pt particle sizes and distributions,desirable Pt^04f binding energy,and the Cl-free Pt surfaces based on the electrocatalytic measurements,catalyst characterizations,and model calculations.The insights reported here could guide the rational design and fine-tuning of carbon-supported Pt catalysts for the ORR.展开更多
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金supported by the National Natural Science Foundation of China(No.21571062)the Program for Professor of Special Appointment(Eastern Scholar)at the Shanghai Institutions of Higher Learning to JGL,and the Fundamental Research Funds for the Central Universities(No.222201717003)。
文摘Exploiting non-precious metal catalysts with excellent oxygen reduction reaction(ORR)performance for energy devices is paramount essential for the green and sustainable society development.Herein,low-cost,high-performance biomass-derived ORR catalysts with an asymmetric Fe-N_(3)P configuration was prepared by a simple pyrolysis-etching technique,where carboxymethyl cellulose(CMC)was used as the carbon source,urea and 1,10-phenanthroline iron complex(FePhen)as additives,and Na_(3)PO_(4)as the phosphorus dopant and a pore-forming agent.The CMC-derived FeNPC catalyst displayed a large specific area(BET:1235 m^(2)g^(-1))with atomically dispersed Fe-N_(3)P active sites,which exhibited superior ORR activity and stability in alkaline solution(E_(1/2)=0.90 V vs.RHE)and Zn-air batteries(P_(max)=149 mW cm^(-2))to commercial Pt/C catalyst(E_(1/2)=0.87 V,P_(max)=118 mW cm^(-2))under similar experimental conditions.This work provides a feasible and costeffective route toward highly efficient ORR catalysts and their application to Zn-air batteries for energy conversion.
基金supported by National Natural Science Foundation of China(No.523B2070,No.52225606).
文摘Polymeric perylene diimide(PDI)has been evidenced as a good candidate for photocatalytic water oxidation,yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration.Herein,with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern,the electronic structure is theoretically illustrated by the first-principles density functional theory calculations,suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI.It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal orbital Hamiltonian group analysis.The calculations of reaction free energy changes indicate that the oxygen evolution reaction should follow the reaction pathway of H_(2)O→^(*)OH→^(*)O→^(*)OOH→^(*)O_(2)with an overpotential of 0.81 V.Through an in-depth theoretical computational analysis in the atomic and electronic structures,the origin of photocatalytic oxygen evolution activity for PDI is well illustrated,which would help the rational design and modification of polymeric photocatalysts for efficient oxygen evolution.
基金supported by the National Key Research and Development Program of China(Nos.2022YFB3504100,2022YFB3506200)the National Natural Science Foundation of China(Nos.22208373,22376217)+1 种基金the Beijing Nova Program(No.20220484215)the Science Foundation of China University of Petroleum,Beijing(No.2462023YJRC030)。
文摘It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active sites.The co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,respectively.The mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature OCM.It is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.
基金financially supported by the National Natural Science Foundation of China(No.22278042)the National Natural Science Foundation of Jiangsu Province(No.BK20240567)+2 种基金the Introduction and Cultivation of Leading Innovative Talents Foundation of Changzhou,Jiangsu Province(No.CQ20220093)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.24KJD530001)the Open Project Program of Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science(No.M2024-7),MOE
文摘Regulating the electronic structure and oxygencontaining intermediates adsorption behavior on Fe-based catalysts is of great significance to cope with the sluggish oxygen reduction reaction(ORR)kinetics,but it still remains a great challenge.In this work,Fe atom clusters(Fe_(AC))modified by high-density Cu single atoms(Cu_(SA))in a N,S-doped porous carbon substrate(Fe_(AC)/Cu_(SA)@NCS)is reported for enhanced ORR electrocatalysis.Fe_(AC)/Cu_(SA)@NCS exhibits excellent ORR performance with a half-wave potential(E_(1/2))of 0.911 V,a high four-electron process selectivity and excellent stability.The ORR performance is also verified in the Fe_(AC)/Cu_(SA)@NCS-based Zn-air battery,which shows a high peak power density of 192.67 mW cm^(-2),a higher specific capacity of 808.3 mAh g^(-1)and impressive charge-discharge cycle stability.Moreover,density functional theory calculations show that Cu single atoms synergistically modulate the electronic structure Fe active atoms in Fe atomic clusters,reducing the energy barrier of the rate-determining step(i.e.,*OH desorption)on Fe_(AC)/Cu_(SA)@NCS.This work provides an effective way to regulate the electronic structure of Fe-based catalysts and optimize their electrocatalytic activity based on the introduction of a second metal source.
基金supported by the Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China(No.2021ZR124)。
文摘Heteroatom doping is a promising strategy for designing cost-effective and stable electrocatalysts toward the oxygen evolution reaction(OER),but the enhancement mechanism remains unclear.Herein,atomic Ir-O-Cu and Ir-O-Ir motifs are engineered into CuO nanowires via cation exchange and dehydration to elucidate the OER mechanism.Systematic characterizations confirm the atomic dispersion of Ir within the CuO lattice and the electron transfer from Ir to CuO while preserving the host structure.The asprepared single-atom Ir-doped CuO(IrSA-CuO),featuring predominant Cu-O-Ir motifs and coexisting IrO-Ir motifs,achieves a low OER overpotential of 204 mV at 10 mA cm^(-2)in 1 M KOH,coupled with a 69-fold higher mass activity than commercial IrO_(2).Furthermore,the Ir_(SA)-CuO maintains long-term stability for 300 h at 200 mA cm^(-2)with minimal overpotential alteration and an additional 120 h at500 mA cm^(-2)with overpotential increased by 15 mV.In situ Raman spectroscopy reveals that the Ir-O-Ir motifs suppress Cu^(Ⅱ) oxidation to Cu^(Ⅲ) by delaying the onset potential,enhancing the structural stability during OER.Density functional theory calculations demonstrate the Cu-O-Ir motifs lower the adsorption energy of bridged ^(*)O via asymmetric bonding,accelerating ^(*)OOH formation in the ratedetermining step.This work presents a heteroatom engineering strategy to balance electrocatalytic activity and durability,providing a blueprint for industrial electrocatalyst design.
基金supported by the National Natural Science Foundation of China(No.21875039)the Project on the Integration of Industry-Education-Research of Fujian Province(No.2021H6020)the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology).
文摘The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt_(3)Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable ORR.Combining theoretical and experiment analysis,we found that the lattice strain of Pt_(3)Ti shells can be tailored by precisely controlling the thick-ness of Pt_(3)Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt_(3)Ti to optimize adsorption properties of Pt_(3)Ti for ORR intermediates,thus enhancing its performance.The Pt@Pt_(3)Ti catalyst with one-atomic Pt_(3)Ti shell(Pt@1L-Pt_(3)Ti/TiO_(2)-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with negligible decay(2%)after 30,000 potential cycles(0.6-1.0 V vs.RHE).Notably,at higher potential cycles(1.0 V-1.5 V vs.RHE),Pt@1L-Pt_(3)Ti/TiO_(2)-C also showed far superior durability than Pt/C(9.6%decayed while 54.8% for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt_(3)Ti alloy and the confinement effect of TiO_(2)-C.The catalyst's enhancement was further confirmed in PEMFC configuration.
基金supported by the Research Program of Jilin Province Development and Reform Commission(2024C018-6).
文摘Oxygen vacancies(Ov)within metal oxide electrodes can enhance mass/charge transfer dynamics in energy storage systems.However,construction of surface Ovoften leads to instability in electrode structure and irreversible electrochemical reactions,posing a significant challenge.To overcome these challenges,atomic heterostructures are employed to address the structural instability and enhance the mass/charge transfer dynamics associated with phase conversion mechanism in aqueous electrodes,Herein,we introduce an atomic S-Bi_(2)O_(3)heterostructure(sulfur(S)anchoring on the surface Ovof Bi_(2)O_(3)).The integration of S within Bi_(2)O_(3)lattice matrix triggers a charge imbala nce at the heterointerfaces,ultimately resulting in the creation of a built-in electric field(BEF).Thus,the BEF attracts OH-ions to be adsorbed onto Bi within the regions of high electron cloud overlap in S-Bi_(2)O_(3),facilitating highly efficient charge transfer.Furthermore,the anchored S plays a pivotal role in preserving structural integrity,thus effectively stabilizing the phase conversion reaction of Bi_(2)O_(3).As a result,the S-Bi_(2)O_(3)electrode achieves72.3 mA h g^(-1)at 10 A g^(-1)as well as high-capacity retention of 81.9%after 1600 cycles.Our innovative SBi_(2)O_(3)design presents a groundbreaking approach for fabricating electrodes that exhibit efficient and stable mass and charge transfer capabilities.Furthermore,it enhances our understanding of the underlying reaction mechanism within energy storage electrodes.
基金supported by the National Natural Science Foundation of China(No.52072283)the program of China Scholarship Council(No.202306950008)。
文摘The advancement of efficient,cheap,and durable catalysts for oxygen reduction reaction(ORR)to substitute Pt/C in metal-air batteries is of paramount importance.However,traditional solvent-based methods fall short in terms of environmental benign and scalability.Herein,a solvent-free organic-inorganic selfassembly approach is explored to construct cobalt single atom and cobalt nanocluster decorated nitrogendoped porous carbon spheres(Co-SA/NC@NCS).The solvent-free synthesis demonstrates an impressively high yield(282 g/L)and the resultant Co-SA/NC@NCS possesses a high N content(6.9 wt%).Density functional theory calculations disclose that the Co-SAs and Co-NCs are able to optimize the surface oxygen adsorption capability and enhance the conductivity of the NCS,thereby facilitating the ORR performance.The sol vent-free synthesis is also feasible for the synthesis of other non-noble metal element(Fe,Ni,and Zn)decorated nitrogen-doped porous carbon spheres.
基金financially supported by National Natural Science Foundation of China(22208137 and 22068022)Yunnan Fundamental Research Projects(202101BE070001-033,202401AT070825,202201BE070001007 and 202301AV070005)。
文摘Concurrent activation of lattice oxygen(O_L)and molecular oxygen(O_(2))is crucial for the efficient catalytic oxidation of biomass-derived molecules over metal oxides.Herein,we report that the introduction of ultralow-loading of Ru single atoms(0.42 wt%)into Mn_(2)O_(3)matrix(0.4%Ru-Mn_(2)O_(3))greatly boosts its catalytic activity for the aerobic oxidation of 5-hydroxymethylfurfural(HMF)to 2,5-furandicarboxylic acid(FDCA).The FDCA productivity over the 0.4%Ru-Mn_(2)O_(3)(5.4 mmol_(FDCA)g_(cat)h^(-1))is 4.9 times higher than the Mn_(2)O_(3).Especially,this FDCAproductivity is also significantly higher than that of existing Ru and Mn-based catalysts.Experimental and theoretical investigations discovered that the Ru single atom facilitated the formation of oxygen vacancy(O_(v))in the catalyst,which synergistically weakened the Mn-O bond and promoted the activation of O_L.The co-presence of Ru single atoms and O_(v)also promote the adsorption and activation of both O_(2)and HMF.Consequently,the dehydrogenation reaction energy barrier of the rate-determining step was reduced via both the O_L and chemisorbed O_(2)dehydrogenation pathways,thus boosting the catalytic oxidation reactions.
基金supported by the National Natural Science Foundations of China(Nos:22271018,22309012 and 22302013)the NSF of Guangdong Province(Nos:2023A1515010554 and 2024A1515010307)。
文摘The oxygen reduction reaction(ORR)could be effectively regulated by adjusting electron configurations and optimizing chemical bonds.Herein,we have achieved the modulation of electron distribution in Fe single atomic(Fe_(SA))sites through Fe atomic clusters(Fe_(AC))via a confined pyrolysis approach,thereby enhancing their intrinsic ORR activity.X-ray absorption spectroscopy has confirmed that the presence of iron atomic dusters could influence the electron distribution at Fe-N_(4)sites.The Fe_(SA)/Fe_(AC)-NC catalyst exhibits a half-wave potential of 0.88 V,surpassing the individual Fe_(SA)-NC structure.Through electronic structure analysis,it could be seen that iron atom clusters can affect Fe-N_(4)sites through long-range effects,and then effectively lower reaction barriers and enhance the reaction kinetics at Fe-N_(4)sites.The synthetic approach might pave the way for constructing highly active catalysts with tunable atomic structures,representing an effective and universal technique for electron modulation in M-N-C systems.This work provides enlightenment for the exploration of more efficient single-atom electrocatalysts and the optimization of the performance of atomic electrocatalysts.Furthermore,a zinc-air battery assembled using it on their cathode deliver a high peak power density(205.7 mW cm^(-2))and a high-specific capacity of 807.5 mA h g^(-1).This study offers a fresh approach to effectively enhance the synergistic interaction of between Fe single atom and Fe atomic clusters for improving ORR activity and energy storage.
基金financially supported by the National Natural Science Foundation of China(22478432,22108306,22178388)Taishan Scholars Program of Shandong Province(tsqn201909065)+2 种基金Shandong Provincial Natural Science Foundation(ZR2024JQ004)Innovation Fund Project for Graduate Student of China University of Petroleum(East China)the Fundamental Research Funds for the Central Universities(No.25CX04020A)。
文摘The development of single atom catalysts(SACs)with asymmetric active sites by defect regulation provides an encourage potential for oxygen reduction reaction(ORR)and hydrogen evolution reaction(HER),but highly challenging.Herein,N-doped carbon(N-C)anchored atomically dispersed Ni-N_(3)site with proximity defects(Ni-N_(3)D)induced by Te atoms doping is reported.Benefitting from the inductive effect of proximity defect,the Ni-N_(3)D/Te-N-C catalyst performs excellent ORR and HER performance in alkaline and acid condition.Both in situ characterization and theoretical calculation reveal that the existence of proximity defect effect is conducive to lower rate-determining-step energy barrier of ORR and HER,thus accelerating the multielectron reaction kinetics.This work paves a novel strategy for constructing highactivity bifunctional SACs by defect engineering for development of sustainable energy.
基金Aerospace Science and Technology Innovation Fund (CASC0505)
文摘Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyim- ide （PI） materials in atomic oxygen （AO） environment, and their mass loss, surface morphology and surface chemical composi- tions have been examined by scanning electron microscope （SEM） and X-ray photoelectron spectroscopy （XPS） after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples＇ surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the re- action rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.
基金National Natural Science Foundation of China (50471004)
文摘Transparent conductive oxide （TCO） thin film is a kind of functional material which has potential applications in solar cells and atomic oxygen （AO） resisting systems in spacecrafts. Of TCO, ZnO：Al （ZAO） and In2O3：Sn （ITO） thin films have been widely used and investigated. In this study, ZAO and ITO thin films were irradiated by AO with different amounts of fluence. The as-deposited samples and irradiated ones were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and Hall-effect measurement to investigate the dependence of the structure, morphology and electrical properties of ZAO or ITO on the amount of fluence of AO irradiation. It is noticed that AO has erosion effects on the surface of ZAO without evident influences upon its structure and conductive properties. Moreover, as the amount of AO fluence rises, the carrier concentration of ITO decreases causing the resistivity to increase by at most 21.7%.
基金This work was supported by the National Key Basic Research and.Development Program of China(No.G19990650).
文摘In order to study the atomic oxygen corrosion of spacecraft materials in low earth orbit environment, an atomic oxygen simulator was established. In the simulator, a 2.45 GHz microwave source with maximum power of 600 W was launched into the circular cavity to generate ECR (electron cyclotron resonance) plasma. The oxygen ion beam moved onto a negatively biased Mo plate under the condition of symmetry magnetic mirror field confine, then was neutralized and reflected to form oxygen atom beam. The properties of plasma density, electron temperature, plasma space potential and ion incident energy were characterized. The atomic oxygen beam flux was calibrated by measuring the mass loss rate of Kapton during the atomic oxygen exposure. The test results show that the atomic oxygen beam with flux of 1016-1017 atoms-cm-2·s-1 and energy of 5-30 eV and a cross section of φ80 mm could be obtained under the operating pressure of 10-1-10-3 Pa. Such a high flux source can provide accelerated simulation tests of materials and coatings for space applications.
基金supported by the National Natural Science Foundation of China(Grants 51702078,51572259,and 51872283)National Key R&D Program of China(Grants 2016YFB0100100 and 2016YFA0200200)+5 种基金Liao Ning Revitalization Talents Program(Grant XLYC1807153)Natural Science Foundation of Liaoning Province(Grant 20180510038)DICP(DICP ZZBS201708,DICP ZZBS201802)DICP&QIBEBT(Grant DICP&QIBEBT UN201702)Dalian National Laboratory For Clean Energy(DNL),CASDNL Cooperation Fund,CAS(DNL180310,DNL180308)。
文摘Single-atom catalysts (SACs) supported on two-dimensional (2D) materials are highly attractive for maximizing their catalytic activity.However,graphene based SACs are primarily bonded with nitrogen and carbon sites,resulting in poor performance for the oxygen evolution reaction (OER).Herein,we develop a general bimetal-ion adsorption strategy for the synthesis of individually dispersed Ni SACs anchored on the oxygenated sites of ultrathin reduced graphene oxide as efficient OER electrocatalysts.The resultant Ni SACs for OER in alkaline electrolyte exhibit a highly stable overpotential of 328 mV at the current density of 10 mA cm^-2,and Tafel slope of 84 mV dec^-1 together with long-term durability and negligible degradation for 50 h,which is greatly outperform its counterparts of nitrogen bonded Ni SACs (564 mV,364 mV dec^-1) and Ni(OH)2 nanoparticles anchored on graphene (450 mV,142 mV dec^-1),and most reported Ni based OER electrocatalysts.Furthermore,the extended X-ray absorption fine structure at the Ni K-edge and theoretical simulation reveal that the nickel-oxygen coordination significantly boost OER performance.Therefore,this work will open numerous opportunities for creating novel-type 2D SACs via oxygen-metal bonding as highly robust OER catalysts.
文摘Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facility. The samples before and after the experiments arecompared in appearance, mass, optical properties and surface composition. The reactioncharacteristics of Teflon are summarized and the reaction mechanisms are analyzed. The followingconclusion can be drawn: at the action of VUV the Teflon sample surface is darkened for theaccumulation of carbon; and when the sample is exposed to AO, the carbon is oxidized and thedarkening surface is bleached; the synergistic effects of VUV and AO may cause the erosion of Teflonmore severe.
基金the National Natu- ral Science Foundation of China (No.21473015 and No.41574101)the Fundamental Research Funds for the Central Universities (No.3132018233).
文摘Due to outstanding mechanical properties, heat resistance, and relatively facile production,nanoclay reinforced epoxy composites(NCRE composites) have been suggested as candidate materials for use on external surfaces of spacecraft residing in the low Earth orbit(LEO) environment. The resistance of the NCRE composites to bombardment by atomic oxygen(AO), a dominant component of the LEO environment, has been investigated. Four types of samples were used in this study. They were pure epoxy(0 wt% nanoclay content), and NCRE composites with different loadings of nanoclay—1 wt%, 2 wt%, and 4 wt%. Etch depths decreased with increasing nanoclay content, and for the 4 wt% samples it ranged from 28% to 37% compared to that of pure epoxy. X-ray photoelectron spectroscopy(XPS) indicates that after AO bombardment, relative area of C-C/C-H peak decreased,while the area of the C-O, ketones peaks increased, and the oxidation degree of surfaces increased. New carbon-related component carbonates were detected on nanoclay containing composite surfaces. Scanning electron microscopy indicates that aggregates formed on nanoclay-containing surfaces after AO bombardment. The sizes and densities of aggregates increased with nanoclay content. The combined erosion depths, XPS and SEM results indicate that although all the studied surfaces got eroded and oxidized after AO bombardment,the nanoclay containing composites showed better AO resistance compared to pure epoxy,because the produced aggregates on surface potentially act as a physical "shield", effectively retarding parts of the surface from further AO etching.
文摘The erosion behavior of Kapton when exposed to atomic oxygen (AO) environment in the ground-based simulation facility was studied. The chemical and physical changes of sample surfaces after exposed to AO fluxes were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results indicated that Kapton underwent dramatically degradation, including much mass loss and change of surface morphologies; vacuum outgassing effect of Kapton was the key factor for initial mass loss in the course of atomic oxygen beam exposures. XPS analysis showed that the carbonyl group in Kapton reacted with oxygen atoms to generate CO2, then CO2 desorbed from Kapton surface. In addition, PMDA in the polyimide structure degraded due to the reaction with atomic oxygen of 5 eV.
基金financially supported by the Natural Science Foundation of China(21922803 and 21776077)the Shanghai Natural Science Foundation(17ZR1407300 and 17ZR1407500)+3 种基金the Program for the Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learningthe Shanghai Rising-Star Program(17QA1401200)the State Key Laboratory of Organic-Inorganic Composites(oic-201801007)the Open Project of State Key Laboratory of Chemical Engineering(SKLChe-15C03)。
文摘Understanding carbon-supported Pt-catalyzed oxygen reduction reaction(ORR)from the perspective of the active sites is of fundamental and practical importance.In this study,three differently sized carbon nanotube-supported Pt nanoparticles(Pt/CNT)are prepared by both atomic layer deposition(ALD)and impregnation methods.The performances of the catalysts toward the ORR in acidic media are comparatively studied to probe the effects of the sizes of the Pt nanoparticles together with their distributions,electronic properties,and local environments.The ALD-Pt/CNT catalysts show much higher ORR activity and selectivity than the impregnation-Pt/CNT catalysts.This outstanding ORR performance is ascribed to the well-controlled Pt particle sizes and distributions,desirable Pt^04f binding energy,and the Cl-free Pt surfaces based on the electrocatalytic measurements,catalyst characterizations,and model calculations.The insights reported here could guide the rational design and fine-tuning of carbon-supported Pt catalysts for the ORR.
