Examining carbonate dissolution kinetics at mineral-water interface is crucial to understand numerous environmental and geochemical processes,including global carbon cycling,CO_(2)sequestration in deep geological rese...Examining carbonate dissolution kinetics at mineral-water interface is crucial to understand numerous environmental and geochemical processes,including global carbon cycling,CO_(2)sequestration in deep geological reservoirs,and trace elements release in terrestrial and aquatic environments.Here we explored the effect of circumneutral to alkaline pH solutions(pH 6-11)on dissolution kinetics of pure dolomite and Ca and Mg release stoichiometry in flow-through reactor experiments at 25±1℃.Results revealed that the dolomite dissolution rates obtained from effluent Ca and Mg concentrations(R_(Ca)and R_(Mg)in mol/cm^(2)/s)were dependent on input solution pH and HCO_(3)^(-)log activity.The pH dependence of dissolution rates showed two distinct trends,i.e.,at circumneutral pH ranging between 6 and 8,the dissolution rate decreased with increasing pH,with minimum rate at pH 8.While in the highly alkaline pH range(pH 9-11),the dolomite dissolution rate increased with an increasing pH.Irrespective of the input pH,the dolomite dissolution rates indicated a reverse relationship with HCO_(3)^(-)log activity,with the lowest dissolution rate(R Ca=3.80×10^(-12)mol/cm^(2)/s)at pH 8 where HCO_(3)^(-)log activity attained the highest value(-3.957).The lower R Ca and R Mg obtained at pH 8 compared to all the other pH could possibly be attributed to an inhibition caused by high HCO_(3)^(-)log activity in solution at this pH.Dolomite dissolution rates were non-stoichiometric at all the experimental pH values,showing higher preferential Ca over Mg release(R_(Ca)>R_(Mg))whereas an opposite trend was observed at pH 8,with R_(Ca)<R_(Mg)at the steady state.Saturation index values calculated using geochemical speciation modelling were positive for Mg-bearing minerals(brucite,dolomite,artinite)at alkaline pH of 10-11,indicating favourable conditions for their precipitation under studied conditions.This study provides insights on the significance of log ion activities of HCO_(3)^(-)and Me-OH^(+)under varying pH for elucidating the dissolution mechanism of dolomite in circumneutral to alkaline aqueous environments.展开更多
Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of N...Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of NF membranes is intrinsically constrained by the morphology and structure of the polyamide(PA) selective layer.This issue arises because NF membranes typically exhibit relatively smooth nodular structures,which theoretically impede efficient water transport.In this study,we enhanced the formation of nanobubbles by synergistically regulating with surfactant and low temperatures,resulting in the fabrication of PA NF membranes with a crumpled morphology.We observed that lower temperatures promote enhanced gas solubility in the aqueous phase,facilitating increased nanobubble formation through the foaming effect of surfactant sodium dodecylbenzene sulfonate(SDBS).Consequently,this resulted in the creation of PA NF membranes with more crumpled structures and superior performance,with pure water permeance reaching 36.25 ± 0.42 L m^(-2)h^(-1)bar^(-1),representing an improvement of 14.47 L m^(-2)h^(-1)bar^(-1)compared to the control group.Additionally,it maintains a high Na_(2)SO_(4) rejection rate of97.00 % ± 0.58 %.The PA NF membranes produced by eliminating nanobubbles and free interfaces exhibited a smooth structure,whereas introducing nanobubbles(through Na HCO_(3) addition,N_(2) pressurization,and ultrasonication) resulted in the formation of crumpled membranes.This emphasized that the large amount of nanobubbles generated by SDBS and low temperature in the interfacial process played a critical role in shaping crumpled PA NF membranes and enhancing membrane performance.This approach has the potential to provide valuable insights into customizing the structural design of TFC PA NF membranes,contributing to further advancements in this field.展开更多
In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on th...In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.展开更多
Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temp...Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is g...Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.展开更多
The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconci...The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconcile this contradiction,two Mg-0.1Sc-0.1Y-0.1Ag anodes with different residual strain distribution through extrusion with/without annealing are fabricated.The results indicate that annealing can significantly lessen the“pseudo-anode”regions,thereby changing the dissolution mode of the matrix and achieving an effective dissolution during discharge.Additionally,p-type semiconductor characteristic of discharge productfilm could suppress the self-corrosion reaction without reducing the polarization of anode.The magnesium-air battery utilizing annealed Mg-0.1Sc-0.1Y-0.1Ag as anode achieves a synergistic improvement in specific capacity(1388.89 mA h g^(-1))and energy density(1960.42 mW h g^(-1)).This anode modification method accelerates the advancement of high efficiency and long lifespan magnesium-air batteries,offering renewable and cost-effective energy solutions for electronics and emergency equipment.展开更多
Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temper...Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temperature and highpressure dissolution kinetic simulations were conducted.The results demonstrate that the intensity of burial dissolution is controlled by temperature and pressure,while tectonic-fluid activity influences the development pattern of burial dissolution,ultimately determining the direction of its differential modification.Extensive burial dissolution is likely to occur primarily at relatively shallow depths,significantly influencing reservoir formation,preservation,modification,and adjustment.The development of faults facilitates the maintenance of the intensity of burial dissolution.The maximum intensity of burial dissolution occurs at the tips and overlap zones of faults and intersections of multiple faults.The larger the scale of the faults,the more conducive it is to the development of burial dissolution.Burial dissolution fosters the formation of fault networks characterized by enhanced reservoir capacity and permeability.Burial dissolution controlled by episodic tectonic-fluid activity is a plausible explanation for forming the Tarim Basin's ultra-deep fault-controlled“stringbead-like”reservoirs.展开更多
Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-form...Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.展开更多
The dissolution behavior of complex inclusions in refining slag was studied using confocal laser scanning microscope.Based on the dissolution curve of complex inclusions,the main rate-limiting link of CaO-SiO_(2)-Al_(...The dissolution behavior of complex inclusions in refining slag was studied using confocal laser scanning microscope.Based on the dissolution curve of complex inclusions,the main rate-limiting link of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was the diffusion in the molten slag.The dissolution rate of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was affected by the composition and size of inclusion.The functional relationship between the dimensionless inclusion capacity(Zh)and the dimensionless dissolution rate(Ry)of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was calculated as Ry=2.10×10^(-6)Zh^(0.160),while it was Ry=2.10×10^(-6)Zh^(0.0087)for Al_(2)O_(3)-CaO complex inclusions.On this basis,the complete dissolution time and rate of the complex inclusions were calculated by using the function relation between the Zh and Ry numbers.展开更多
To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the character...To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.展开更多
Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon h...Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.展开更多
Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aq...Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.展开更多
Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly im...Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly impairs seedling emergence.In this study,genetic diversity across six germination-associated phenotypic traits(RGR,RSL,RTL,RRSA,RRV,and RSVI)of 304 inbred lines was analyzed,to evaluate the capacity of these lines for low-temperature tolerance.Genome-wide association study(GWAS)was carried out by combining six germination-associated phenotypic traits and genotypic data from 30-fold resequencing.The gene ZmBARK1 was identified through integrated GWAS and RNA-seq analyses,and its association with low-temperature tolerance during maize germination was validated by quantitative real-time PCR(qRT-PCR).ZmBARK1,encoding BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1,was located on the bin 4.09 region of maize chromosome 4.Amino acid comparison and subcellular localization analyses revealed that ZmBARK1 is highly homologous to AtBAK1 and is localized to the plasma membrane of the cell,which may be involved in regulating brassinosteroid(BR)signaling.In addition,we revealed the role of ZmBARK1 in low-temperature tolerance during maize germination.Compared with wild-type(WT),the ethyl methanesulfonate(EMS)mutant zmbark1 was characterized by substantially enhanced low-temperature tolerance.Overall,these findings provide promising candidate genes,improve low-temperature tolerance in maize,and advance the understanding of regulatory mechanisms underlying maize's response to low-temperature stress.展开更多
In a hydrogen-rich blast furnace,an increased coke load accentuates the support skeleton role of coke,particularly in the cohesive and dripping zones following partial dissolution with slag.To investigate the dissolut...In a hydrogen-rich blast furnace,an increased coke load accentuates the support skeleton role of coke,particularly in the cohesive and dripping zones following partial dissolution with slag.To investigate the dissolution behaviours of coke in these regions,coke samples were gasified in a N2-CO-CO_(2)-H_(2)-H_(2)O atmosphere,simulating hydrogen-rich blast furnace conditions.Subsequently,the dissolution of gasified coke with slag containing FeO was analysed.The influence of coke gasification degree and FeO concentration in slag on coke dissolution was examined.The results showed that both higher coke gasification degrees and increased FeO content accelerate coke mass loss and exacerbate surface degradation upon dissolution,while effects on the internal structure of coke remain relatively minor,especially regarding FeO concentration.Additionally,hydrogen-rich gasification raised the graphitisation level of coke,with dissolution further enhancing the graphitisation of gasified coke.展开更多
Global coral reef ecosystems have been severely degraded due to the combined effects of climate change and human activities.Changes in the seawater carbonate system of coral reef ecosystems can reflect their status an...Global coral reef ecosystems have been severely degraded due to the combined effects of climate change and human activities.Changes in the seawater carbonate system of coral reef ecosystems can reflect their status and their responses to the impacts of climate change and human activities.Winter and summer surveys in 2019 found that the ecological community of the Luhuitou coral reef flat was dominated by macroalgae and corals,respectively,contrasting with the conditions 10 years ago.The Luhuitou fringing reefs were sources of atmospheric CO_(2) in both seasons.In winter,the daily variation range of dissolved inorganic carbon(DIC)in Luhuitou coral reefs was up to 450μmol/kg,while that of total alkalinity(TA)was only 68μmol/kg.This indicated that the organic production was significantly higher than the calcification process during this period.The TA/DIC was approximately 0.15,which was less than half of that in healthy coral reefs;hence,photosynthesis-respiration processes were the most important factors controlling daily changes in the seawater carbonate system.The net community production(NCP)of the Luhuitou coral reef ecosystem in winter was as high as 47.65 mmol C/(m^(2)·h).While the net community calcification(NCC)was approximately 3.35 and-4.15 mmol CaCO_(3)/(m^(2)·h)during the daytime and nighttime respectively.Therefore,the NCC for the entire day was-21.9 mmol CaCO_(3)/(m^(2)·d),indicating a net autotrophic dissolved state.In summer,the acidification was enhanced by thunderstorms and heavy rain with the highest seawater partial pressure of CO_(2)(p CO_(2))and lowest pH T.Over the past 10 years,the increase rate of seawater p CO_(2) in Luhuitou reef was approximately 13.3μatm/a***,six times that of the open ocean,while the decrease rate of pH was approximately 0.0083/a,being five times that of the global ocean.These findings underscore the importance of protecting and restoring Luhuitou fringing reef,as well as similar reefs worldwide.展开更多
Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This stu...Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This study explores novel coupled pretreatments of free-end largeangle pre-torsion and low-temperature aging to improve the fatigue resistance of rolled ZK60 magnesium alloy.STA(pre-torsion followed by low-temperature aging)and SAT(low-temperature aging followed by pre-torsion)samples were prepared to investigate the influences of pretreatment coupling sequences.The results of microstructure characterization reveal that pre-torsion significantly enhances the formation of tensile twins and introduces a gradient microstructure with increased dislocation density from the center to the edges.STA process resulted in the highest twinning area fraction of 35.2% and a kernel average misorientation of 0.94 at the edge.Mechanical testing demonstrated that the coupled pre-treatment obtained a better combination of strength and plasticity,significantly improved the yield strength in the compression stage,and increased the tensile-compressive yield ratio to>0.9.In the low-cycle fatigue test,the STA samples exhibited lower cyclic mean stress,a smaller cyclic hardening trend,and better hysteretic symmetry,leading to an improvement in fatigue life of up to 256%.The findings suggest that the combined pre-torsion and low-temperature aging treatments offer a promising approach to enhance the mechanical properties and fatigue resistance of ZK60 magnesium alloy,making it suitable for structural applications in demanding environments.展开更多
Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wil...Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wild-type RR,mutant sitiens(sit),and ABA-pretreated sit tomato seedlings following exposure to low-temperature(LT)stress.We found that the net photosynthetic rate,intercellular carbon dioxide concentration,transpiration rate,and stomatal conductance of sit seedlings were lower than those of RR seedlings under LT stress.The chloroplast width,area,and number of osmiophilic granules were significantly larger in sit seedlings than in RR seedlings,while the chloroplast length/width ratio was significantly lower in sit seedlings than in RR seedlings.The photochemical activity of sit seedlings was lower,and the expression of photosynthesis-related genes in sit seedlings was altered following exposure to LT stress.ABA pretreatment significantly alleviated the above phenomenon.We also conducted an RNA sequencing analysis and characterized the expression patterns of genes in tomato seedlings following exposure to LT stress.We constructed 15 cDNA libraries and identified several differentially expressed genes involved in photosynthesis,plant hormone signaling transduction,and primary and secondary metabolism.Additional analyses of genes encoding transcription factors and proteins involved in photosynthesis-related processes showed pronounced changes in expression under LT stress.Luciferase reporter assay and electrophoretic mobility shift assay revealed that WRKY22 regulates the expression of PsbA.The PSII of WRKY22 and PsbA-silenced plants was inhibited.Our findings indicate that ABA plays a role in regulating the process of photosynthesis and protecting PSII in tomato under LT stress through the WRKY22-PsbA complex.展开更多
The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for i...The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for instant properties formation in berry powder.The effects of inlet air temperature(40℃–80℃),vacuum degree(0.02–0.06 MPa)and additive amount on the physicochemical properties of berry powder were analyzed through solubility,anthocyanin retention and powder yield,based on moisture content and microstructure.The findings indicated that adding maltodextrin to berry enhanced the powder yield and instant solubility.Whey protein,as an additive,provided effective protection for the anthocyanins of berry powder,and the addition less than 10 g·100^(-1) g improved the powder yield.Inulin,as an additive,reduced moisture content of berry powder,which was conducive to the higher anthocyanin retention and solubility.Technique for order preference by similarity to ideal solution(TOPSIS)analysis was conducted to optimize the spray drying parameters for anthocyanin protection and solubility.The addition of 100%maltodextrin enhanced anthocyanin protection and solubility,while maintaining the desired moisture content and powder yield.This approach was used to evaluate the comprehensive quality of berry powder.This research can provide technical guidance for producing berry powder under low-temperature spray drying.展开更多
The deep layer has become an important replacement field for oil and gas exploration,but the formation mechanism of effective reservoirs is unknown,and the distribution of dessert reservoirs is difficult to predict,wh...The deep layer has become an important replacement field for oil and gas exploration,but the formation mechanism of effective reservoirs is unknown,and the distribution of dessert reservoirs is difficult to predict,which seriously affects the discovery of deep resources.In this paper,the reservoir of the first and second members of the Shahejie Formation in the Caofeidian 6-4S area of the Bozhong Depression is taken as an example.Through the comprehensive means such as well-seismic calibration,denudation recovery,source-sink quantitative coupling,basin simulation,microscopic observation,X-ray diffraction,inclusion and thermodynamic analysis,the reservoir formation mechanism of dissolution pores and the favorable area distribution of thermodynamic prediction of dissolution reaction in the study area are carried out.The results show that the dissolution pores are the dominant type,accounting for more than 80%of the total pores.The dissolution reaction between soluble minerals such as feldspar accumulated in the near source and acidic fluids such as organic acids formed in the adjacent strata is the main mechanism for the development of dissolution pores.The organic matter in the adjacent strata is controlled by temperature and pressure during the burial evolution process to form organic acids,and migrates to the adjacent reservoirs for selective dissolution under the action of pressure and other driving forces.The characteristics of thermodynamic parameters(ΔG,which can determine whether feldspar is dissolved)and kinetic parameters(R,indicating the degree of feldspar dissolution)of feldspar dissolution reaction show that the thermodynamic parameters of feldspar dissolution are positively correlated with temperature,and the kinetic parameters are correlated with the concentration of organic acid discharge.The results of thermodynamic and kinetic parameters are coupled with provenance-sedimentary facies-diagenetic facies,and it is predicted that the plane area of TypeⅠfavorable area is 50 km^(2),and the plane area of TypeⅡfavorable area is 62.4 km2.This method provides theoretical reference and method guidance for the prediction of favorable reservoir distribution of deep clastic rocks,and has a good application prospect.展开更多
基金funding enabled and organized by CAUL and its Member Institutionsby COMSTEQ-TWAS research grant 2018(18-268 RG/EAS/AS_C)。
文摘Examining carbonate dissolution kinetics at mineral-water interface is crucial to understand numerous environmental and geochemical processes,including global carbon cycling,CO_(2)sequestration in deep geological reservoirs,and trace elements release in terrestrial and aquatic environments.Here we explored the effect of circumneutral to alkaline pH solutions(pH 6-11)on dissolution kinetics of pure dolomite and Ca and Mg release stoichiometry in flow-through reactor experiments at 25±1℃.Results revealed that the dolomite dissolution rates obtained from effluent Ca and Mg concentrations(R_(Ca)and R_(Mg)in mol/cm^(2)/s)were dependent on input solution pH and HCO_(3)^(-)log activity.The pH dependence of dissolution rates showed two distinct trends,i.e.,at circumneutral pH ranging between 6 and 8,the dissolution rate decreased with increasing pH,with minimum rate at pH 8.While in the highly alkaline pH range(pH 9-11),the dolomite dissolution rate increased with an increasing pH.Irrespective of the input pH,the dolomite dissolution rates indicated a reverse relationship with HCO_(3)^(-)log activity,with the lowest dissolution rate(R Ca=3.80×10^(-12)mol/cm^(2)/s)at pH 8 where HCO_(3)^(-)log activity attained the highest value(-3.957).The lower R Ca and R Mg obtained at pH 8 compared to all the other pH could possibly be attributed to an inhibition caused by high HCO_(3)^(-)log activity in solution at this pH.Dolomite dissolution rates were non-stoichiometric at all the experimental pH values,showing higher preferential Ca over Mg release(R_(Ca)>R_(Mg))whereas an opposite trend was observed at pH 8,with R_(Ca)<R_(Mg)at the steady state.Saturation index values calculated using geochemical speciation modelling were positive for Mg-bearing minerals(brucite,dolomite,artinite)at alkaline pH of 10-11,indicating favourable conditions for their precipitation under studied conditions.This study provides insights on the significance of log ion activities of HCO_(3)^(-)and Me-OH^(+)under varying pH for elucidating the dissolution mechanism of dolomite in circumneutral to alkaline aqueous environments.
基金the National Natural Science Foundation of China (Nos.52430001,52470091,52200108) for the financial support。
文摘Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of NF membranes is intrinsically constrained by the morphology and structure of the polyamide(PA) selective layer.This issue arises because NF membranes typically exhibit relatively smooth nodular structures,which theoretically impede efficient water transport.In this study,we enhanced the formation of nanobubbles by synergistically regulating with surfactant and low temperatures,resulting in the fabrication of PA NF membranes with a crumpled morphology.We observed that lower temperatures promote enhanced gas solubility in the aqueous phase,facilitating increased nanobubble formation through the foaming effect of surfactant sodium dodecylbenzene sulfonate(SDBS).Consequently,this resulted in the creation of PA NF membranes with more crumpled structures and superior performance,with pure water permeance reaching 36.25 ± 0.42 L m^(-2)h^(-1)bar^(-1),representing an improvement of 14.47 L m^(-2)h^(-1)bar^(-1)compared to the control group.Additionally,it maintains a high Na_(2)SO_(4) rejection rate of97.00 % ± 0.58 %.The PA NF membranes produced by eliminating nanobubbles and free interfaces exhibited a smooth structure,whereas introducing nanobubbles(through Na HCO_(3) addition,N_(2) pressurization,and ultrasonication) resulted in the formation of crumpled membranes.This emphasized that the large amount of nanobubbles generated by SDBS and low temperature in the interfacial process played a critical role in shaping crumpled PA NF membranes and enhancing membrane performance.This approach has the potential to provide valuable insights into customizing the structural design of TFC PA NF membranes,contributing to further advancements in this field.
基金the National Natural Science Foundation of China,grant number 52406074the China Postdoctoral Science Foundation under Grant Number 2025T180171+1 种基金the Natural Science Foundation of Guangdong Province(2025A1515011270)the China Southern Power Grid Technology Project(GDKJXM20231415/030100KC23120104).
文摘In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.
基金the financial support from the Key Project of Shaanxi Provincial Natural Science Foundation-Key Project of Laboratory(2025SYS-SYSZD-117)the Natural Science Basic Research Program of Shaanxi(2025JCYBQN-125)+8 种基金Young Talent Fund of Xi'an Association for Science and Technology(0959202513002)the Key Industrial Chain Technology Research Program of Xi'an(24ZDCYJSGG0048)the Key Research and Development Program of Xianyang(L2023-ZDYF-SF-077)Postdoctoral Fellowship Program of CPSF(GZC20241442)Shaanxi Postdoctoral Science Foundation(2024BSHSDZZ070)Research Funds for the Interdisciplinary Projects,CHU(300104240913)the Fundamental Research Funds for the Central Universities,CHU(300102385739,300102384201,300102384103)the Scientific Innovation Practice Project of Postgraduate of Chang'an University(300103725063)the financial support from the Australian Research Council。
文摘Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(No.SML2023SP243)the National Key Research and Development Program of China(No.2022YFC2906100)the National Natural Science Foundation of China(No.92475202)are acknowledged.
文摘Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.
基金the National Natural Science:Foundation of China(52375370)the Open Project of Salt Lake Chemical Engineering Research Complex,Qinghai University(2023-DXSSKF-Z02)+2 种基金the Nat-ural Science Foundation of Shanxi(202103021224049)GDAS Projects of International cooperation platform of Sci-ence and Technology(2022GDASZH-2022010203-003)Guangdong province Science and Technology Plan Projects(2023B1212060045).
文摘The dominated contradiction in optimizing the performance of magnesium-air battery anode lies in the difficulty of achieving a good balance between activation and passivation during discharge process.To further reconcile this contradiction,two Mg-0.1Sc-0.1Y-0.1Ag anodes with different residual strain distribution through extrusion with/without annealing are fabricated.The results indicate that annealing can significantly lessen the“pseudo-anode”regions,thereby changing the dissolution mode of the matrix and achieving an effective dissolution during discharge.Additionally,p-type semiconductor characteristic of discharge productfilm could suppress the self-corrosion reaction without reducing the polarization of anode.The magnesium-air battery utilizing annealed Mg-0.1Sc-0.1Y-0.1Ag as anode achieves a synergistic improvement in specific capacity(1388.89 mA h g^(-1))and energy density(1960.42 mW h g^(-1)).This anode modification method accelerates the advancement of high efficiency and long lifespan magnesium-air batteries,offering renewable and cost-effective energy solutions for electronics and emergency equipment.
基金supported by the National Natural Science Foundation of China(Grant No.U21B2062)supported by the Key Laboratory for Carbonate Reservoirs of China National Petroleum Corporation。
文摘Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temperature and highpressure dissolution kinetic simulations were conducted.The results demonstrate that the intensity of burial dissolution is controlled by temperature and pressure,while tectonic-fluid activity influences the development pattern of burial dissolution,ultimately determining the direction of its differential modification.Extensive burial dissolution is likely to occur primarily at relatively shallow depths,significantly influencing reservoir formation,preservation,modification,and adjustment.The development of faults facilitates the maintenance of the intensity of burial dissolution.The maximum intensity of burial dissolution occurs at the tips and overlap zones of faults and intersections of multiple faults.The larger the scale of the faults,the more conducive it is to the development of burial dissolution.Burial dissolution fosters the formation of fault networks characterized by enhanced reservoir capacity and permeability.Burial dissolution controlled by episodic tectonic-fluid activity is a plausible explanation for forming the Tarim Basin's ultra-deep fault-controlled“stringbead-like”reservoirs.
基金financial support from the Department of Science and Technology of Jilin Province(20240304104SF,20240304103SF)the Research and Innovation Fund of the Beihua University for the Graduate Student(Major Project 2023012)。
文摘Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.
基金support from the National Key R&D Program(No.2023YFB3709900)the National Natural Science Foundation of China(Grant No.U22A20171)+1 种基金the High Steel Center at the North China University of Technologythe University of Science and Technology Beijing,China.
文摘The dissolution behavior of complex inclusions in refining slag was studied using confocal laser scanning microscope.Based on the dissolution curve of complex inclusions,the main rate-limiting link of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was the diffusion in the molten slag.The dissolution rate of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was affected by the composition and size of inclusion.The functional relationship between the dimensionless inclusion capacity(Zh)and the dimensionless dissolution rate(Ry)of CaO-SiO_(2)-Al_(2)O_(3)complex inclusions was calculated as Ry=2.10×10^(-6)Zh^(0.160),while it was Ry=2.10×10^(-6)Zh^(0.0087)for Al_(2)O_(3)-CaO complex inclusions.On this basis,the complete dissolution time and rate of the complex inclusions were calculated by using the function relation between the Zh and Ry numbers.
基金support by the National Natural Science Foundation of Inner Mongolia (2022SHZR1885)Natural Science Foundation of Hebei province (E2022402101,E2022402105)。
文摘To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.
文摘Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.
基金partially supported by the National Natural Science Foundation of China(22479022)Liaoning Revitalization Talents Program(XLYC2007129)。
文摘Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.
基金supported by the Key Research and Development Project of Heilongjiang Province(2022ZX02B01)the Natural Science Foundation Project of Heilongjiang Province(YQ2022C009)the Natural Science Foundation of Shandong Province(K22LB56)。
文摘Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly impairs seedling emergence.In this study,genetic diversity across six germination-associated phenotypic traits(RGR,RSL,RTL,RRSA,RRV,and RSVI)of 304 inbred lines was analyzed,to evaluate the capacity of these lines for low-temperature tolerance.Genome-wide association study(GWAS)was carried out by combining six germination-associated phenotypic traits and genotypic data from 30-fold resequencing.The gene ZmBARK1 was identified through integrated GWAS and RNA-seq analyses,and its association with low-temperature tolerance during maize germination was validated by quantitative real-time PCR(qRT-PCR).ZmBARK1,encoding BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1,was located on the bin 4.09 region of maize chromosome 4.Amino acid comparison and subcellular localization analyses revealed that ZmBARK1 is highly homologous to AtBAK1 and is localized to the plasma membrane of the cell,which may be involved in regulating brassinosteroid(BR)signaling.In addition,we revealed the role of ZmBARK1 in low-temperature tolerance during maize germination.Compared with wild-type(WT),the ethyl methanesulfonate(EMS)mutant zmbark1 was characterized by substantially enhanced low-temperature tolerance.Overall,these findings provide promising candidate genes,improve low-temperature tolerance in maize,and advance the understanding of regulatory mechanisms underlying maize's response to low-temperature stress.
基金the financial support provided by the National Natural Science Foundation of China(Nos.52174300 and 52404340)Science and Technology Innovation Key R&D Program of Chongqing,China(No.CSTB2024TIAD-STX0009)+3 种基金The Science and Technology Research Program of Chongqing Municipal Education Commission(No.KJQN202401507)Chongqing Talent Plan Project(cstc2021ycjh-bgzxm0211)Natural Science Foundation of Chongqing,China(No.CSTB2024NSCQ-LZX0052)Chongqing Doctoral“Through Train”Project(No.sl202100000343).
文摘In a hydrogen-rich blast furnace,an increased coke load accentuates the support skeleton role of coke,particularly in the cohesive and dripping zones following partial dissolution with slag.To investigate the dissolution behaviours of coke in these regions,coke samples were gasified in a N2-CO-CO_(2)-H_(2)-H_(2)O atmosphere,simulating hydrogen-rich blast furnace conditions.Subsequently,the dissolution of gasified coke with slag containing FeO was analysed.The influence of coke gasification degree and FeO concentration in slag on coke dissolution was examined.The results showed that both higher coke gasification degrees and increased FeO content accelerate coke mass loss and exacerbate surface degradation upon dissolution,while effects on the internal structure of coke remain relatively minor,especially regarding FeO concentration.Additionally,hydrogen-rich gasification raised the graphitisation level of coke,with dissolution further enhancing the graphitisation of gasified coke.
基金Supported by the National Key Research and Development Program of China(Nos.2021YFC3100500,2022YFC3103602,2021YFF0502800)the National Natural Science Foundation of China(No.U23A2035)+3 种基金the Science and Technology Planning Project of Guangdong Province,China(No.2023B1212060047)the State Key Laboratory of Tropical Oceanography,South China Sea Institute of Oceanology,Chinese Academy of Sciences(No.LTO1919)the Visiting Fellowship Program of the State Key Laboratory of Marine Environmental Science,Xiamen University(No.MELRS1914)the Hainan Province Key R&D Program(No.ZDYF2023SHFZ131)。
文摘Global coral reef ecosystems have been severely degraded due to the combined effects of climate change and human activities.Changes in the seawater carbonate system of coral reef ecosystems can reflect their status and their responses to the impacts of climate change and human activities.Winter and summer surveys in 2019 found that the ecological community of the Luhuitou coral reef flat was dominated by macroalgae and corals,respectively,contrasting with the conditions 10 years ago.The Luhuitou fringing reefs were sources of atmospheric CO_(2) in both seasons.In winter,the daily variation range of dissolved inorganic carbon(DIC)in Luhuitou coral reefs was up to 450μmol/kg,while that of total alkalinity(TA)was only 68μmol/kg.This indicated that the organic production was significantly higher than the calcification process during this period.The TA/DIC was approximately 0.15,which was less than half of that in healthy coral reefs;hence,photosynthesis-respiration processes were the most important factors controlling daily changes in the seawater carbonate system.The net community production(NCP)of the Luhuitou coral reef ecosystem in winter was as high as 47.65 mmol C/(m^(2)·h).While the net community calcification(NCC)was approximately 3.35 and-4.15 mmol CaCO_(3)/(m^(2)·h)during the daytime and nighttime respectively.Therefore,the NCC for the entire day was-21.9 mmol CaCO_(3)/(m^(2)·d),indicating a net autotrophic dissolved state.In summer,the acidification was enhanced by thunderstorms and heavy rain with the highest seawater partial pressure of CO_(2)(p CO_(2))and lowest pH T.Over the past 10 years,the increase rate of seawater p CO_(2) in Luhuitou reef was approximately 13.3μatm/a***,six times that of the open ocean,while the decrease rate of pH was approximately 0.0083/a,being five times that of the global ocean.These findings underscore the importance of protecting and restoring Luhuitou fringing reef,as well as similar reefs worldwide.
基金sponsored by the National Natural Science Foundation of China(Nos.52175143,and 51571150).
文摘Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This study explores novel coupled pretreatments of free-end largeangle pre-torsion and low-temperature aging to improve the fatigue resistance of rolled ZK60 magnesium alloy.STA(pre-torsion followed by low-temperature aging)and SAT(low-temperature aging followed by pre-torsion)samples were prepared to investigate the influences of pretreatment coupling sequences.The results of microstructure characterization reveal that pre-torsion significantly enhances the formation of tensile twins and introduces a gradient microstructure with increased dislocation density from the center to the edges.STA process resulted in the highest twinning area fraction of 35.2% and a kernel average misorientation of 0.94 at the edge.Mechanical testing demonstrated that the coupled pre-treatment obtained a better combination of strength and plasticity,significantly improved the yield strength in the compression stage,and increased the tensile-compressive yield ratio to>0.9.In the low-cycle fatigue test,the STA samples exhibited lower cyclic mean stress,a smaller cyclic hardening trend,and better hysteretic symmetry,leading to an improvement in fatigue life of up to 256%.The findings suggest that the combined pre-torsion and low-temperature aging treatments offer a promising approach to enhance the mechanical properties and fatigue resistance of ZK60 magnesium alloy,making it suitable for structural applications in demanding environments.
基金supported by the National Natural Science Foundation of China(32272791 and 32072651)the earmarked fund for CARS(CARS-23)+1 种基金the Joint Fund for Innovation Enhancement of Liaoning Province,China(2021-NLTS-11-01)the support program for Young and Middle-aged Scientific and Technological Innovation Talents,China(RC210293)。
文摘Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wild-type RR,mutant sitiens(sit),and ABA-pretreated sit tomato seedlings following exposure to low-temperature(LT)stress.We found that the net photosynthetic rate,intercellular carbon dioxide concentration,transpiration rate,and stomatal conductance of sit seedlings were lower than those of RR seedlings under LT stress.The chloroplast width,area,and number of osmiophilic granules were significantly larger in sit seedlings than in RR seedlings,while the chloroplast length/width ratio was significantly lower in sit seedlings than in RR seedlings.The photochemical activity of sit seedlings was lower,and the expression of photosynthesis-related genes in sit seedlings was altered following exposure to LT stress.ABA pretreatment significantly alleviated the above phenomenon.We also conducted an RNA sequencing analysis and characterized the expression patterns of genes in tomato seedlings following exposure to LT stress.We constructed 15 cDNA libraries and identified several differentially expressed genes involved in photosynthesis,plant hormone signaling transduction,and primary and secondary metabolism.Additional analyses of genes encoding transcription factors and proteins involved in photosynthesis-related processes showed pronounced changes in expression under LT stress.Luciferase reporter assay and electrophoretic mobility shift assay revealed that WRKY22 regulates the expression of PsbA.The PSII of WRKY22 and PsbA-silenced plants was inhibited.Our findings indicate that ABA plays a role in regulating the process of photosynthesis and protecting PSII in tomato under LT stress through the WRKY22-PsbA complex.
基金Supported by the National Natural Science Foundation of China(32072352)。
文摘The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for instant properties formation in berry powder.The effects of inlet air temperature(40℃–80℃),vacuum degree(0.02–0.06 MPa)and additive amount on the physicochemical properties of berry powder were analyzed through solubility,anthocyanin retention and powder yield,based on moisture content and microstructure.The findings indicated that adding maltodextrin to berry enhanced the powder yield and instant solubility.Whey protein,as an additive,provided effective protection for the anthocyanins of berry powder,and the addition less than 10 g·100^(-1) g improved the powder yield.Inulin,as an additive,reduced moisture content of berry powder,which was conducive to the higher anthocyanin retention and solubility.Technique for order preference by similarity to ideal solution(TOPSIS)analysis was conducted to optimize the spray drying parameters for anthocyanin protection and solubility.The addition of 100%maltodextrin enhanced anthocyanin protection and solubility,while maintaining the desired moisture content and powder yield.This approach was used to evaluate the comprehensive quality of berry powder.This research can provide technical guidance for producing berry powder under low-temperature spray drying.
基金The National Natural Science Foundation of China under contract Nos U24B2016 and 42202157the National Basic Research Program of China under contract No. KJGG2022-0101+1 种基金the Key Laboratory of Tectonics and Petroleum Resources under contract No. TPR-2023-04CNOOC Technology Project under contract No. KJZH-2023-2105
文摘The deep layer has become an important replacement field for oil and gas exploration,but the formation mechanism of effective reservoirs is unknown,and the distribution of dessert reservoirs is difficult to predict,which seriously affects the discovery of deep resources.In this paper,the reservoir of the first and second members of the Shahejie Formation in the Caofeidian 6-4S area of the Bozhong Depression is taken as an example.Through the comprehensive means such as well-seismic calibration,denudation recovery,source-sink quantitative coupling,basin simulation,microscopic observation,X-ray diffraction,inclusion and thermodynamic analysis,the reservoir formation mechanism of dissolution pores and the favorable area distribution of thermodynamic prediction of dissolution reaction in the study area are carried out.The results show that the dissolution pores are the dominant type,accounting for more than 80%of the total pores.The dissolution reaction between soluble minerals such as feldspar accumulated in the near source and acidic fluids such as organic acids formed in the adjacent strata is the main mechanism for the development of dissolution pores.The organic matter in the adjacent strata is controlled by temperature and pressure during the burial evolution process to form organic acids,and migrates to the adjacent reservoirs for selective dissolution under the action of pressure and other driving forces.The characteristics of thermodynamic parameters(ΔG,which can determine whether feldspar is dissolved)and kinetic parameters(R,indicating the degree of feldspar dissolution)of feldspar dissolution reaction show that the thermodynamic parameters of feldspar dissolution are positively correlated with temperature,and the kinetic parameters are correlated with the concentration of organic acid discharge.The results of thermodynamic and kinetic parameters are coupled with provenance-sedimentary facies-diagenetic facies,and it is predicted that the plane area of TypeⅠfavorable area is 50 km^(2),and the plane area of TypeⅡfavorable area is 62.4 km2.This method provides theoretical reference and method guidance for the prediction of favorable reservoir distribution of deep clastic rocks,and has a good application prospect.
