The rutting and low-temperature resistances of warm-mix recycled asphalt binders under the secondary aging condition were measured by the dynamic shear rheometer test and bending beam rheometer test.Effects of differe...The rutting and low-temperature resistances of warm-mix recycled asphalt binders under the secondary aging condition were measured by the dynamic shear rheometer test and bending beam rheometer test.Effects of different types of warm-mix asphalt(WMA)technologies and additives were evaluated.Aging and improvement mechanisms were investigated by the Fourier transform infrared spectroscopy test.It is found that recycled binders after the secondary aging are more resistant to rutting and less resistant to low-temperature cracking.The two warm-mix asphalt technologies have opposite effects.Using the Sasobit WMA significantly improves the rutting resistance and reduces the low temperature resistance for the recycled binders due to its morphological change at different temperatures.The rutting factor values of recycled asphalt binders with the Sasobit additive increase by 4.6 to 5.6 times.However,using the Evotherm WMA causes the deterioration of the rutting resistance due to the structural lubrication effect.The rutting factor values of recycled asphalt binders with the Evotherm additive show the reduction of 52%to 62%.It is recommended to add the styrene butadiene rubber latex or crumb rubber powder into the warm-mix recycled asphalt binders to simultaneously improve the rutting and low-temperature cracking resistances.展开更多
Factors affecting the resistance of asphalt mixtures against low-temperature cracking are divided into three categories:pavement structure geometry,material properties,and environmental conditions.Most of the existing...Factors affecting the resistance of asphalt mixtures against low-temperature cracking are divided into three categories:pavement structure geometry,material properties,and environmental conditions.Most of the existing models for evaluating and predicting the resistance of asphalt mixtures against low-temperature cracking have focused more on environmental factors and pavement structure geometry.However,the impact of material properties has been neglected.The concepts of surface free energy(SFE)that focus on material properties have a high potential to assess different failures of asphalt mixtures.Accordingly,in this research,the effect of SFE parameters,along with mix design parameters and bitumen rheological properties,were studied on the resistance of asphalt mixture against low-temperature cracking using an artificial neural network(ANN)model.Two indicators of fracture energy and fracture toughness were considered as the criteria for the resistance of asphalt mixtures against low-temperature cracking which is measured by the semi-circular bending(SCB)test.The sensitivity analysis results of the models indicated a positive correlation between the resistance of asphalt mixtures against low-temperature cracking and independent variables,including the apparent film thickness(AFT)on the surface of the aggregate,the index of aggregate(Ia),adhesion free energy(AFE),the ratio of the base to acid component of the aggregates(base to acid),cohesion free energy(CFE),the specific surface area(SSA)of the aggregates,and the stress relaxation rate(m-value).Among the variables studied,bitumen creep stiffness had a reverse relationship with the resistance of asphalt mixtures against low-temperature cracking.In addition,the sensitivity analysis results based on normalized data illustrated that the AFT and m-value were the most significant parameters affecting the asphalt mixtures'resistance against low-temperature cracking.展开更多
In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on th...In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.展开更多
Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temp...Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
A green pregelatinized glutinous rice flour biological admixture was developed in this paper.The cement hydration process,hydration products,pore structure,and strength of mortar with different quantities of glutinous...A green pregelatinized glutinous rice flour biological admixture was developed in this paper.The cement hydration process,hydration products,pore structure,and strength of mortar with different quantities of glutinous rice flour(GRF),and the macroscopic changes in concrete cracking resistance testing were investigated.Simultaneously,a fast cracking resistance evaluation method based on graphic recognition was proposed.The results indicated that pregelatinized glutinous rice flour(T-GRF)delayed the dissolution rate of anhydrous cement during the induction period,shifting the main exothermic peak of hydration backward.The compressive strength developed slowly in 7-28 d age and returned to normal in 28-56 d.The compressive strength of T-GRF-0.6% modified mortar at 56 d age is less than 10% different from that of control group.The 3.0%T-GRF decreased the total porosity by 3%,and the average pore size decreased from 31.2 to 21.3 nm measured by MIP,indicating that T-GRF could inhibit harmful pores and densify concrete.The crack resistance coefficient of T-GRF modified concrete was obtained by image recognition method,and the GRF could decrease the length,width,and damaged area of cracks in the early age of concrete.展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
Soil desiccation cracking is a prevalent natural phenomenon that poses significant geotechnical and geoenvironmental challenges.Cracks typically initiate at surface defects such as air bubbles,large aggregates,tiny pi...Soil desiccation cracking is a prevalent natural phenomenon that poses significant geotechnical and geoenvironmental challenges.Cracks typically initiate at surface defects such as air bubbles,large aggregates,tiny pits,or uneven surfaces,where localized stress concentrations are readily induced.This study conducted a series of laboratory desiccation tests on slurry samples to investigate the initiation and propagation of desiccation cracks in the presence of varying types and quantities of surface defects.Digital image correlation(DIC)technology was employed to monitor the strain and displacement fields on the soil surface during the desiccation process.The results reveal that strain and displacement data derived from DIC can precisely predict the initiation sites and propagation directions of desiccation cracks.In samples with internal defects,cracks predominantly propagate through the defect,whereas external defects tend to initiate cracks along their edges.In samples with multiple defects,Y-shaped crack patterns generally form initially,followed by T-shaped and straight cracks,driven by the evolving stress field.The dynamic interplay between crack formation and tensile stress redistribution governs the initiation and propagation of desiccation cracks.展开更多
A series of CoMo/ZrO2-Al2O3 catalysts with different contents of ZrO2 were prepared and characterized through XRD,XPS,NH3-TPD,H2-TPR,HR-TEM,and N2 adsorption-desorption technologies.The performance of the catalysts fo...A series of CoMo/ZrO2-Al2O3 catalysts with different contents of ZrO2 were prepared and characterized through XRD,XPS,NH3-TPD,H2-TPR,HR-TEM,and N2 adsorption-desorption technologies.The performance of the catalysts for low-temperature coal tar(LTCT)hydrocracking reaction was investigated.The interaction between active metals and Al2O3 was weakened with the introduction of ZrO2,which increased the MoS2 content and the stack layer number of MoS2 slabs to further promote the catalytic performance.At the same time,the amount of acid sites increased with an increasing ZrO2 content.When the ZrO2 content reached 32%,the pore volume of the catalyst decreased significantly.This phenomenon reduced the content of MoS2 and the stack layer number of MoS2 slabs,which were not conducive to improving the catalytic performance.The catalyst containing 24%of ZrO2 exhibited the best catalytic performance for hydrocracking reaction,with the residue conversion and the total yield of gasoline and diesel fractions reaching 60.64%and 66.54%,respectively,which could fulfill the requirements for hydrocracking LTCT.展开更多
Soil desiccation cracking is a common phenomenon on the earth surface.Numerical modeling is an effective approach to study the desiccation cracking mechanism of soil.This work develops a novel 3D moisture diffusion di...Soil desiccation cracking is a common phenomenon on the earth surface.Numerical modeling is an effective approach to study the desiccation cracking mechanism of soil.This work develops a novel 3D moisture diffusion discrete model that is capable of dynamically assessing the effect of cracking on moisture diffusion and allowing moisture to be discontinuous on both sides of the cracks.Then,the parametric analysis of the moisture exchange coefficient in the 3D moisture diffusion discrete model is carried out for moisture diffusion in continuous media,and the selection criterion of the moisture exchange coefficient for the unbroken cohesive element is given.Subsequently,an example of moisture migration in a medium with one crack is provided to illustrate the crack hindering effect on moisture migration.Finally,combining the 3D moisture diffusion discrete model with the finite-discrete element method(FDEM),the moisture diffusion-fracture coupling model is built to study the desiccation cracking in a strip soil and the crack pattern of a rectangular soil.The evolution of crack area and volume with moisture content is quantitatively analyzed.The modeling number and average width of cracks in the strip soil show a good consistency with the experimental results,and the crack pattern of the rectangular soil matches well with the existing numerical results,validating the coupled moisture diffusion-fracture model.Additionally,the parametric study of soil desiccation cracking is performed.The developed model offers a powerful tool for exploring soil desiccation cracking.展开更多
Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is g...Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.展开更多
Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-form...Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.展开更多
To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the character...To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.展开更多
Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon h...Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.展开更多
Additive manufacturing (AM) of high-strength metallic alloys frequently encounters detrimental distortion and cracking, attributed to the accumulation of thermal stresses. These issues significantly impede the practic...Additive manufacturing (AM) of high-strength metallic alloys frequently encounters detrimental distortion and cracking, attributed to the accumulation of thermal stresses. These issues significantly impede the practical application of as-printed components. This study examines the Mg-15Gd-1Zn-0.4Zr (GZ151K, wt.%) alloy, a prototypical high-strength casting Mg-RE alloy, fabricated through laser powder bed fusion (LPBF). Despite achieving ultra-high strength, the GZ151K alloy concurrently exhibits a pronounced cold-cracking susceptibility. The as-printed GZ151K alloy consists of almost fully fine equiaxed grains with an average grain size of merely 2.87 µm. Subsequent direct aging (T5) heat treatment induces the formation of dense prismatic β' precipitates. Consequently, the LPBF-T5 GZ151K alloy manifests an ultra-high yield strength of 405 MPa, surpassing all previously reported yield strengths for Mg alloys fabricated via LPBF and even exceeding that of its extrusion-T5 counterpart. Interestingly, as-printed GZ151K samples with a build height of 2 mm exhibit no cracking, whereas samples with build heights ranging from 4 to 18 mm demonstrate severe cold cracking. Thermal stress simulation also suggests that the cold cracking susceptibility increases significantly with increasing build height. The combination of high thermal stress and low ductility in the as-printed GZ151K alloy culminates in a high cold cracking susceptibility. This study offers novel insights into the intricate issue of cold cracking in the LPBF process of high-strength Mg alloys, highlighting the critical balance between achieving high strength and mitigating cold cracking susceptibility.展开更多
High cracking susceptibility of Al-Li alloys with Ti/Ce B6addition is thoroughly suppressed in laser powder bed fusion(LPBF)processing of Ti/Ce co-modified 2195 alloys at relatively high scan speeds,while the cracking...High cracking susceptibility of Al-Li alloys with Ti/Ce B6addition is thoroughly suppressed in laser powder bed fusion(LPBF)processing of Ti/Ce co-modified 2195 alloys at relatively high scan speeds,while the cracking suppression mechanism and phase formation in these composites are not clarified.In this work,microstructure evolution and mechanical performance of the LPBF-fabricated Ti/Ce co-modified 2195 are investigated to reveal their cracking suppression and strengthening mechanisms.The results show that apparent grain refinement of the composites is ascribed to high supercooling from rapid formation of constitutional supercooling zone in front of solid–liquid interfaces by high-Q-value Ti solute,and heterogeneous nucleation of in situ formed Al3Ti and Al11Ce3precipitates.Their synergistic interactions promote formation of fine equiaxed grains and thus inhibit crack initiation.The composites exhibit high microhardness of 100±5HV0.2,nano-hardness of 1.6±0.1 GPa and elastic modulus of 97±3 GPa,where the elastic modulus increases by 27%and 31%compared to those of LPBF-processed and conventionally manufactured 2195 alloys,respectively.A tensile strength of 336 MPa and an elongation of 3%are obtained from in-situ synchrotron X-ray diffraction measurement.The improved properties are derived from grain refinement and Orowan strengthening.Based on the optimal processing parameter and composition,a bracket component filled with lattice structures is designed and manufactured with good manufacturing quality and processing accuracy.展开更多
Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aq...Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.展开更多
Mg-Li alloys hold significant potential for applications in aerospace,automotive manufacturing,military weaponry,and biomedical implants,due to their excellent recyclability,high specific strength,biocompatibility,and...Mg-Li alloys hold significant potential for applications in aerospace,automotive manufacturing,military weaponry,and biomedical implants,due to their excellent recyclability,high specific strength,biocompatibility,and superior electromagnetic shielding properties.However,their poor corrosion resistance and high susceptibility to environmentally assisted cracking(EAC)significantly limit broader application.In recent years,growing attention has been directed toward understanding the corrosion and EAC behavior of Mg-Li alloys,as localized corrosion areas and hydrogen generated during the corrosion process can serve as crack initiation points and promote crack propagation.A comprehensive understanding of these mechanisms is essential for enhancing the reliability and performance of Mg-Li alloys in practical environments.This paper presents a detailed review of corrosion and EAC in Mg-Li alloys,focusing on corrosion behavior,crack initiation and propagation mechanisms,and the key factors influencing these processes.It summarizes recent advances in alloying,heat treatment,mechanical processing,microstructural control,environmental influences,mechanical loading,and surface treatments.In addition,the paper explores future research directions,highlights emerging trends,and proposes strategies to improve the durability and service performance of Mg-Li alloys.展开更多
Solidification cracking(SC)of 2024 high-strength aluminium alloy during fusion welding or additive manufacturing has been a long-term issue.In this work,crack-free weld could be obtained using a Zr-core-Alshell wire(Z...Solidification cracking(SC)of 2024 high-strength aluminium alloy during fusion welding or additive manufacturing has been a long-term issue.In this work,crack-free weld could be obtained using a Zr-core-Alshell wire(ZCASW filler material,a novel filler)coupled with an oscillating laser-arc hybrid welding process,and we investigated the solidification cracking susceptibility(SCS)and cracking behavior of AA2024 weld fabricated with different filler materials.The cracking inhibition mechanism of the weld fabricated with ZCASW filler material was elucidated by combined experiments and phase-field simulation.The results show that the effectiveness of filler materials in reducing the SC gradually improves in the order of ER2319 filler material<ER4043 filler material<ZCASW filler material.The main cracking(when using the ER2319 filler material)branches and the micro cracking branches interact with each other to produce cracking coalescence,which aggravates the cracking propagation.The formation of the Al_(3) Zr phase(when using the ZCASW filler material)promotes heterogeneous nucleation of α-Al,thereby resulting in finer and equiaxed non-dendrite structures,which shortens the liquid phase channels and decreases cracking susceptibility index|d T/d(f_(s))^(1/2)|(T is temperature and f_(s) is solidification fraction)at final solidification.A higher proportion(7.65%area fraction)of inter-dendrite phase with spherical distribution state,a shorter(8.6 mm liquid channel length)inter-dendrite phase coupled with round non-dendrite structure(6μm dendrite size)effectively inhibit the SC.The present study can be a useful database for welding and additive manufacturing of AA2024.展开更多
Coralline soils,specialized materials found extensively in the South China Sea,are playing an increasingly vital role in engineering projects.However,like most terrigenous soils,fine-grained coral soil is prone to shr...Coralline soils,specialized materials found extensively in the South China Sea,are playing an increasingly vital role in engineering projects.However,like most terrigenous soils,fine-grained coral soil is prone to shrinkage and cracking,which can significantly affect its engineering properties and ultimately jeopardize engineering safety.This paper presents a desiccation cracking test of fine-grained coral soil,with a particular focus on the thickness effect.The study involved measuring the water content and recording the evolution of desiccation cracking.Advanced image processing technology is employed to analyze the variations in crack parameters,clod parameters,fractal dimensions,frequency distributions,and desiccation cracking propagation velocities of fine-grained coral soil.Furthermore,the dynamic evolution of desiccation cracking under the influence of layer thickness is analyzed.A comprehensive crack evolution model is proposed,encompassing both top-down and bottom-up crack propagation,as well as internal tensile cracking.This work introduces novel metrics for the propagation velocity of the total crack area,the characteristic propagation velocities of desiccation cracks,and the acceleration of crack propagation.Through data fitting,theoretical formulas for soil water evaporation,propagation velocities of desiccation cracks,and crack propagation acceleration are derived,laying a foundation for future soil cracking theories.展开更多
基金The Natural Science Foundation of Jiangsu Province(No.BK20181404)Qing Lan Project(2016)the Training Plan Project for Young Core Teachers of Nanjing Forestry University(2017).
文摘The rutting and low-temperature resistances of warm-mix recycled asphalt binders under the secondary aging condition were measured by the dynamic shear rheometer test and bending beam rheometer test.Effects of different types of warm-mix asphalt(WMA)technologies and additives were evaluated.Aging and improvement mechanisms were investigated by the Fourier transform infrared spectroscopy test.It is found that recycled binders after the secondary aging are more resistant to rutting and less resistant to low-temperature cracking.The two warm-mix asphalt technologies have opposite effects.Using the Sasobit WMA significantly improves the rutting resistance and reduces the low temperature resistance for the recycled binders due to its morphological change at different temperatures.The rutting factor values of recycled asphalt binders with the Sasobit additive increase by 4.6 to 5.6 times.However,using the Evotherm WMA causes the deterioration of the rutting resistance due to the structural lubrication effect.The rutting factor values of recycled asphalt binders with the Evotherm additive show the reduction of 52%to 62%.It is recommended to add the styrene butadiene rubber latex or crumb rubber powder into the warm-mix recycled asphalt binders to simultaneously improve the rutting and low-temperature cracking resistances.
文摘Factors affecting the resistance of asphalt mixtures against low-temperature cracking are divided into three categories:pavement structure geometry,material properties,and environmental conditions.Most of the existing models for evaluating and predicting the resistance of asphalt mixtures against low-temperature cracking have focused more on environmental factors and pavement structure geometry.However,the impact of material properties has been neglected.The concepts of surface free energy(SFE)that focus on material properties have a high potential to assess different failures of asphalt mixtures.Accordingly,in this research,the effect of SFE parameters,along with mix design parameters and bitumen rheological properties,were studied on the resistance of asphalt mixture against low-temperature cracking using an artificial neural network(ANN)model.Two indicators of fracture energy and fracture toughness were considered as the criteria for the resistance of asphalt mixtures against low-temperature cracking which is measured by the semi-circular bending(SCB)test.The sensitivity analysis results of the models indicated a positive correlation between the resistance of asphalt mixtures against low-temperature cracking and independent variables,including the apparent film thickness(AFT)on the surface of the aggregate,the index of aggregate(Ia),adhesion free energy(AFE),the ratio of the base to acid component of the aggregates(base to acid),cohesion free energy(CFE),the specific surface area(SSA)of the aggregates,and the stress relaxation rate(m-value).Among the variables studied,bitumen creep stiffness had a reverse relationship with the resistance of asphalt mixtures against low-temperature cracking.In addition,the sensitivity analysis results based on normalized data illustrated that the AFT and m-value were the most significant parameters affecting the asphalt mixtures'resistance against low-temperature cracking.
基金the National Natural Science Foundation of China,grant number 52406074the China Postdoctoral Science Foundation under Grant Number 2025T180171+1 种基金the Natural Science Foundation of Guangdong Province(2025A1515011270)the China Southern Power Grid Technology Project(GDKJXM20231415/030100KC23120104).
文摘In order to explore the effects of CaO,lignite dust and sawdust on the drying characteristics ofmunicipal sludge at different concentrations,a three-factor three-level regression experiment was carried out based on the results of thermogravimetric experiment and single factor experiment.By fitting three common mathematical models,the Page model with the highest fitting degree was selected to determine the most suitable mathematical model to describe the municipal sludge drying process.In addition,the Box-Behnken design principle in the response surface method was used to analyze the interaction of three factors on the drying characteristics of municipal sludge.The results of the study show that below 100℃is the optimal drying temperature range for municipal sludge.The results of single factor experiments showed that the order of influence of the three factors on sludge drying time was CaO concentration>sawdust concentration>lignite dust concentration.In the single factor experiment,the optimal process parameterswere CaOconcentration 3%,lignite powder concentration 7%,and sawdust concentration 7%.In themulti-factor interaction analysis,the interaction between CaO and sawdust had the most significant effect on the reduction of drying time,and the order of influence was as follows:CaO interaction with sawdust>lignite dust interaction with sawdust>CaO interaction with lignite powder.Further analysis showed that the optimal process ratio was 3%CaO concentration and 3%sawdust concentration.
基金the financial support from the Key Project of Shaanxi Provincial Natural Science Foundation-Key Project of Laboratory(2025SYS-SYSZD-117)the Natural Science Basic Research Program of Shaanxi(2025JCYBQN-125)+8 种基金Young Talent Fund of Xi'an Association for Science and Technology(0959202513002)the Key Industrial Chain Technology Research Program of Xi'an(24ZDCYJSGG0048)the Key Research and Development Program of Xianyang(L2023-ZDYF-SF-077)Postdoctoral Fellowship Program of CPSF(GZC20241442)Shaanxi Postdoctoral Science Foundation(2024BSHSDZZ070)Research Funds for the Interdisciplinary Projects,CHU(300104240913)the Fundamental Research Funds for the Central Universities,CHU(300102385739,300102384201,300102384103)the Scientific Innovation Practice Project of Postgraduate of Chang'an University(300103725063)the financial support from the Australian Research Council。
文摘Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金Funded by Hainan Provincial Natural Science Foundation(No.522QN279)State Key Laboratory of High Performance Civil Engineering Materials(No.2023CEM004)。
文摘A green pregelatinized glutinous rice flour biological admixture was developed in this paper.The cement hydration process,hydration products,pore structure,and strength of mortar with different quantities of glutinous rice flour(GRF),and the macroscopic changes in concrete cracking resistance testing were investigated.Simultaneously,a fast cracking resistance evaluation method based on graphic recognition was proposed.The results indicated that pregelatinized glutinous rice flour(T-GRF)delayed the dissolution rate of anhydrous cement during the induction period,shifting the main exothermic peak of hydration backward.The compressive strength developed slowly in 7-28 d age and returned to normal in 28-56 d.The compressive strength of T-GRF-0.6% modified mortar at 56 d age is less than 10% different from that of control group.The 3.0%T-GRF decreased the total porosity by 3%,and the average pore size decreased from 31.2 to 21.3 nm measured by MIP,indicating that T-GRF could inhibit harmful pores and densify concrete.The crack resistance coefficient of T-GRF modified concrete was obtained by image recognition method,and the GRF could decrease the length,width,and damaged area of cracks in the early age of concrete.
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
基金supported by the National Natural Science Foundation of China(Grant Nos.42525201,42230710,42407521).
文摘Soil desiccation cracking is a prevalent natural phenomenon that poses significant geotechnical and geoenvironmental challenges.Cracks typically initiate at surface defects such as air bubbles,large aggregates,tiny pits,or uneven surfaces,where localized stress concentrations are readily induced.This study conducted a series of laboratory desiccation tests on slurry samples to investigate the initiation and propagation of desiccation cracks in the presence of varying types and quantities of surface defects.Digital image correlation(DIC)technology was employed to monitor the strain and displacement fields on the soil surface during the desiccation process.The results reveal that strain and displacement data derived from DIC can precisely predict the initiation sites and propagation directions of desiccation cracks.In samples with internal defects,cracks predominantly propagate through the defect,whereas external defects tend to initiate cracks along their edges.In samples with multiple defects,Y-shaped crack patterns generally form initially,followed by T-shaped and straight cracks,driven by the evolving stress field.The dynamic interplay between crack formation and tensile stress redistribution governs the initiation and propagation of desiccation cracks.
基金Financial support from the National Nature Science Foundation of China(21968034)is gratefully acknowledged.
文摘A series of CoMo/ZrO2-Al2O3 catalysts with different contents of ZrO2 were prepared and characterized through XRD,XPS,NH3-TPD,H2-TPR,HR-TEM,and N2 adsorption-desorption technologies.The performance of the catalysts for low-temperature coal tar(LTCT)hydrocracking reaction was investigated.The interaction between active metals and Al2O3 was weakened with the introduction of ZrO2,which increased the MoS2 content and the stack layer number of MoS2 slabs to further promote the catalytic performance.At the same time,the amount of acid sites increased with an increasing ZrO2 content.When the ZrO2 content reached 32%,the pore volume of the catalyst decreased significantly.This phenomenon reduced the content of MoS2 and the stack layer number of MoS2 slabs,which were not conducive to improving the catalytic performance.The catalyst containing 24%of ZrO2 exhibited the best catalytic performance for hydrocracking reaction,with the residue conversion and the total yield of gasoline and diesel fractions reaching 60.64%and 66.54%,respectively,which could fulfill the requirements for hydrocracking LTCT.
基金supported by the State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering(Grant No.SKLGDUEK2206)National Natural Science Foundation of China(Grant No.11872340).
文摘Soil desiccation cracking is a common phenomenon on the earth surface.Numerical modeling is an effective approach to study the desiccation cracking mechanism of soil.This work develops a novel 3D moisture diffusion discrete model that is capable of dynamically assessing the effect of cracking on moisture diffusion and allowing moisture to be discontinuous on both sides of the cracks.Then,the parametric analysis of the moisture exchange coefficient in the 3D moisture diffusion discrete model is carried out for moisture diffusion in continuous media,and the selection criterion of the moisture exchange coefficient for the unbroken cohesive element is given.Subsequently,an example of moisture migration in a medium with one crack is provided to illustrate the crack hindering effect on moisture migration.Finally,combining the 3D moisture diffusion discrete model with the finite-discrete element method(FDEM),the moisture diffusion-fracture coupling model is built to study the desiccation cracking in a strip soil and the crack pattern of a rectangular soil.The evolution of crack area and volume with moisture content is quantitatively analyzed.The modeling number and average width of cracks in the strip soil show a good consistency with the experimental results,and the crack pattern of the rectangular soil matches well with the existing numerical results,validating the coupled moisture diffusion-fracture model.Additionally,the parametric study of soil desiccation cracking is performed.The developed model offers a powerful tool for exploring soil desiccation cracking.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(No.SML2023SP243)the National Key Research and Development Program of China(No.2022YFC2906100)the National Natural Science Foundation of China(No.92475202)are acknowledged.
文摘Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.
基金financial support from the Department of Science and Technology of Jilin Province(20240304104SF,20240304103SF)the Research and Innovation Fund of the Beihua University for the Graduate Student(Major Project 2023012)。
文摘Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.
基金support by the National Natural Science Foundation of Inner Mongolia (2022SHZR1885)Natural Science Foundation of Hebei province (E2022402101,E2022402105)。
文摘To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.
文摘Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.
基金supported by the National Key Research and Development Program of China(No.2021YFB3701000)the National Natural Science Foundation of China(Nos.51971130,52201129,U21A2047,51821001,U2037601)+2 种基金support by the China Postdoctoral Science Foun-dation(2023M742219)the Postdoctoral Fellowship Program of CPSF under Grant Number GZB20240419support by the Ministry of Education,Singapore,under its Academic Research Fund Tier 2(MOE-T2EP50221-0013).
文摘Additive manufacturing (AM) of high-strength metallic alloys frequently encounters detrimental distortion and cracking, attributed to the accumulation of thermal stresses. These issues significantly impede the practical application of as-printed components. This study examines the Mg-15Gd-1Zn-0.4Zr (GZ151K, wt.%) alloy, a prototypical high-strength casting Mg-RE alloy, fabricated through laser powder bed fusion (LPBF). Despite achieving ultra-high strength, the GZ151K alloy concurrently exhibits a pronounced cold-cracking susceptibility. The as-printed GZ151K alloy consists of almost fully fine equiaxed grains with an average grain size of merely 2.87 µm. Subsequent direct aging (T5) heat treatment induces the formation of dense prismatic β' precipitates. Consequently, the LPBF-T5 GZ151K alloy manifests an ultra-high yield strength of 405 MPa, surpassing all previously reported yield strengths for Mg alloys fabricated via LPBF and even exceeding that of its extrusion-T5 counterpart. Interestingly, as-printed GZ151K samples with a build height of 2 mm exhibit no cracking, whereas samples with build heights ranging from 4 to 18 mm demonstrate severe cold cracking. Thermal stress simulation also suggests that the cold cracking susceptibility increases significantly with increasing build height. The combination of high thermal stress and low ductility in the as-printed GZ151K alloy culminates in a high cold cracking susceptibility. This study offers novel insights into the intricate issue of cold cracking in the LPBF process of high-strength Mg alloys, highlighting the critical balance between achieving high strength and mitigating cold cracking susceptibility.
基金supported by the National Natural Science Foundation of China(Nos.52205382,52225503)National Key Research and Development Program(No.2023YFB4603300)+3 种基金Key Research and Development Program of Jiangsu Province(Nos.BE2022069,BZ2024019)National Natural Science Foundation of China for Creative Research Groups(No.51921003)International Joint Laboratory of Sustainable Manufacturing,Ministry of Education and the Fundamental Research Funds for the Central Universities(NG2024014)Postgraduate Research&Practice Innovation Program of NUAA(xcxjh20230616)。
文摘High cracking susceptibility of Al-Li alloys with Ti/Ce B6addition is thoroughly suppressed in laser powder bed fusion(LPBF)processing of Ti/Ce co-modified 2195 alloys at relatively high scan speeds,while the cracking suppression mechanism and phase formation in these composites are not clarified.In this work,microstructure evolution and mechanical performance of the LPBF-fabricated Ti/Ce co-modified 2195 are investigated to reveal their cracking suppression and strengthening mechanisms.The results show that apparent grain refinement of the composites is ascribed to high supercooling from rapid formation of constitutional supercooling zone in front of solid–liquid interfaces by high-Q-value Ti solute,and heterogeneous nucleation of in situ formed Al3Ti and Al11Ce3precipitates.Their synergistic interactions promote formation of fine equiaxed grains and thus inhibit crack initiation.The composites exhibit high microhardness of 100±5HV0.2,nano-hardness of 1.6±0.1 GPa and elastic modulus of 97±3 GPa,where the elastic modulus increases by 27%and 31%compared to those of LPBF-processed and conventionally manufactured 2195 alloys,respectively.A tensile strength of 336 MPa and an elongation of 3%are obtained from in-situ synchrotron X-ray diffraction measurement.The improved properties are derived from grain refinement and Orowan strengthening.Based on the optimal processing parameter and composition,a bracket component filled with lattice structures is designed and manufactured with good manufacturing quality and processing accuracy.
基金partially supported by the National Natural Science Foundation of China(22479022)Liaoning Revitalization Talents Program(XLYC2007129)。
文摘Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.
基金supported by the National Natural Science Foundation of China Projects under Grant(nos.52301112,52331004,U21A2049,and 51871211)Guangdong Basic and Applied Basic Research Foundation(Grant no.2024A1515030065)+4 种基金Basic and Applied Basic Research Project of Guangzhou(Grant no.2024A04J6299)LiaoNing Revitalization Talents Program(XLYC1907062,and XLYC2403026)Shenyang Young and Middle-aged Science and Technology Innovation Talent Support Program(RC231178)the Fundamental Research Funds for the Central Universities(N25GFY002)the Innovation Fund of Institute of Metal Research(IMR),Chinese Academy of Sciences(CAS).
文摘Mg-Li alloys hold significant potential for applications in aerospace,automotive manufacturing,military weaponry,and biomedical implants,due to their excellent recyclability,high specific strength,biocompatibility,and superior electromagnetic shielding properties.However,their poor corrosion resistance and high susceptibility to environmentally assisted cracking(EAC)significantly limit broader application.In recent years,growing attention has been directed toward understanding the corrosion and EAC behavior of Mg-Li alloys,as localized corrosion areas and hydrogen generated during the corrosion process can serve as crack initiation points and promote crack propagation.A comprehensive understanding of these mechanisms is essential for enhancing the reliability and performance of Mg-Li alloys in practical environments.This paper presents a detailed review of corrosion and EAC in Mg-Li alloys,focusing on corrosion behavior,crack initiation and propagation mechanisms,and the key factors influencing these processes.It summarizes recent advances in alloying,heat treatment,mechanical processing,microstructural control,environmental influences,mechanical loading,and surface treatments.In addition,the paper explores future research directions,highlights emerging trends,and proposes strategies to improve the durability and service performance of Mg-Li alloys.
基金financially supported by the National Natural Science Foundation of China under Grant Nos.52305467,52188102,U22A20196,and 52075201the Guangdong Basic and Applied Basic Research Foundation Nos.2023A1515010081 and 2022B1212020003the Fundamental Research Funds for the Central Universities under Grant No.YCJJ20230360.
文摘Solidification cracking(SC)of 2024 high-strength aluminium alloy during fusion welding or additive manufacturing has been a long-term issue.In this work,crack-free weld could be obtained using a Zr-core-Alshell wire(ZCASW filler material,a novel filler)coupled with an oscillating laser-arc hybrid welding process,and we investigated the solidification cracking susceptibility(SCS)and cracking behavior of AA2024 weld fabricated with different filler materials.The cracking inhibition mechanism of the weld fabricated with ZCASW filler material was elucidated by combined experiments and phase-field simulation.The results show that the effectiveness of filler materials in reducing the SC gradually improves in the order of ER2319 filler material<ER4043 filler material<ZCASW filler material.The main cracking(when using the ER2319 filler material)branches and the micro cracking branches interact with each other to produce cracking coalescence,which aggravates the cracking propagation.The formation of the Al_(3) Zr phase(when using the ZCASW filler material)promotes heterogeneous nucleation of α-Al,thereby resulting in finer and equiaxed non-dendrite structures,which shortens the liquid phase channels and decreases cracking susceptibility index|d T/d(f_(s))^(1/2)|(T is temperature and f_(s) is solidification fraction)at final solidification.A higher proportion(7.65%area fraction)of inter-dendrite phase with spherical distribution state,a shorter(8.6 mm liquid channel length)inter-dendrite phase coupled with round non-dendrite structure(6μm dendrite size)effectively inhibit the SC.The present study can be a useful database for welding and additive manufacturing of AA2024.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.2022CDJQY-012)the Innovation Group Science Foundation of the Natural Science Foundation of Chongqing,China(Grant No.cstc2020jcyj-cxttX0003).
文摘Coralline soils,specialized materials found extensively in the South China Sea,are playing an increasingly vital role in engineering projects.However,like most terrigenous soils,fine-grained coral soil is prone to shrinkage and cracking,which can significantly affect its engineering properties and ultimately jeopardize engineering safety.This paper presents a desiccation cracking test of fine-grained coral soil,with a particular focus on the thickness effect.The study involved measuring the water content and recording the evolution of desiccation cracking.Advanced image processing technology is employed to analyze the variations in crack parameters,clod parameters,fractal dimensions,frequency distributions,and desiccation cracking propagation velocities of fine-grained coral soil.Furthermore,the dynamic evolution of desiccation cracking under the influence of layer thickness is analyzed.A comprehensive crack evolution model is proposed,encompassing both top-down and bottom-up crack propagation,as well as internal tensile cracking.This work introduces novel metrics for the propagation velocity of the total crack area,the characteristic propagation velocities of desiccation cracks,and the acceleration of crack propagation.Through data fitting,theoretical formulas for soil water evaporation,propagation velocities of desiccation cracks,and crack propagation acceleration are derived,laying a foundation for future soil cracking theories.
