Mesoscopic fluid flow is the major cause of wave attenuation and velocity dispersion at seismic frequencies in porous rocks. The Johnson model provides solutions for the frequency-dependent quality factor and phase ve...Mesoscopic fluid flow is the major cause of wave attenuation and velocity dispersion at seismic frequencies in porous rocks. The Johnson model provides solutions for the frequency-dependent quality factor and phase velocity in partially saturated porous media with pore patches of arbitrary shapes. We use the Johnson model to derive approximations for the quality factor Q at the high and low frequency limit, and obtain the approximate equation for Qmin based on geophysical and geometric parameters. A more accurate equation for Qmin is obtained after correcting for the linear errors between the exact and approximate Q values. The complexity of the pore patch shape affects the maximum attenuation of Qmin and the transition frequency ftr; furthermore, the effect on ftr is stronger than that on Qmin. Numerical solutions to Biot’s equation are computationally intensive; thus, we build an equivalent viscoelastic model on the basis of the Zener model, which well approximates the wave attenuation and dispersion in porous rocks in the seismic band.展开更多
AIM:To study the relationships between amplitude of low-frequency fluctuations(ALFF)changes and clinical ophthalmic parameters in patients with primary open angle glaucoma(POAG)and analyze the diagnostic value of ALFF...AIM:To study the relationships between amplitude of low-frequency fluctuations(ALFF)changes and clinical ophthalmic parameters in patients with primary open angle glaucoma(POAG)and analyze the diagnostic value of ALFF.METHODS:Twenty-four POAG patients and 24 healthy controls(HCs)underwent resting-state functional magnetic resonance imaging(rs-fMRI).Nonparametric rank-sum tests were used to compare the ALFF values in the slow-4 and slow-5 bands,and Spearman or Pearson correlation analysis was used to assess the correlation between ALFF changes and clinical ophthalmic parameters in POAG patients.Receiver operating characteristic(ROC)curves were used to evaluate the diagnostic performance of the ALFF.RESULTS:There were 16 males in POAG patients(median age 48y)and 12 males in HCs(median age 39y).Compared with HCs,POAG patients presented increased or decreased ALFF values in different brain regions,and similar changes were observed in mild POAG patients.The ALFF values were correlated with retinal nerve fiber layer(RNFL)thickness,inner limiting membrane-retinal pigment epithelium thickness changes and the degree of visual field defects.Analysis of the diagnostic value of the ALFF via ROC curves revealed that the right medial frontal gyrus[area under the curve(AUC)=0.9063]and superior frontal gyrus(AUC=0.9097)had better diagnostic value than did the optic disc area(AUC=0.8019),visual field index(VFI%,AUC=0.8988)and macular parameters.CONCLUSION:POAG patients present altered cortical function that is significantly correlated with the optic nerve and retinal thickness and had good diagnostic value,which may reflect the underlying neuropathological mechanism of POAG.展开更多
Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging tec...Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.展开更多
The precise tuning of magnetic nanoparticle size and magnetic domains,thereby shaping magnetic properties.However,the dynamic evolution mechanisms of magnetic domain configurations in relation to electromagnetic(EM)at...The precise tuning of magnetic nanoparticle size and magnetic domains,thereby shaping magnetic properties.However,the dynamic evolution mechanisms of magnetic domain configurations in relation to electromagnetic(EM)attenuation behavior remain poorly understood.To address this gap,a thermodynamically controlled periodic coordination strategy is proposed to achieve precise modulation of magnetic nanoparticle spacing.This approach unveils the evolution of magnetic domain configurations,progressing from individual to coupled and ultimately to crosslinked domain configurations.A unique magnetic coupling phenomenon surpasses the Snoek limit in low-frequency range,which is observed through micromagnetic simulation.The crosslinked magnetic configuration achieves effective low-frequency EM wave absorption at 3.68 GHz,encompassing nearly the entire C-band.This exceptional magnetic interaction significantly enhances radar camouflage and thermal insulation properties.Additionally,a robust gradient metamaterial design extends coverage across the full band(2–40 GHz),effectively mitigating the impact of EM pollution on human health and environment.This comprehensive study elucidates the evolution mechanisms of magnetic domain configurations,addresses gaps in dynamic magnetic modulation,and provides novel insights for the development of high-performance,low-frequency EM wave absorption materials.展开更多
Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and...Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure conditions.Calibration with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]Hz.The Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent effects.Under dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the sandstone.In particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective pressure.In addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.展开更多
BACKGROUND Hepatic steatosis,characterized by fat accumulation in hepatocytes,can result from metabolic dysfunction-associated steatotic liver disease(MASLD),infections,alcoholism,chemotherapy,and toxins.MASLD is diag...BACKGROUND Hepatic steatosis,characterized by fat accumulation in hepatocytes,can result from metabolic dysfunction-associated steatotic liver disease(MASLD),infections,alcoholism,chemotherapy,and toxins.MASLD is diagnosed via imaging or biopsy with metabolic criteria and may progress to metabolic dysfunction–asso-ciated steatohepatitis,potentially leading to fibrosis,cirrhosis,or cancer.The coexistence of hepatic steatosis with chronic hepatitis B(CHB)is mainly related to metabolic factors and increases mortality and cancer risks.As a noninvasive method,attenuation imaging(ATI)shows promise in quantifying liver fat,demonstrating strong correlation with liver biopsy.AIM To investigate the disparity of ATI for assessing biopsy-based hepatic steatosis in CHB patients and MASLD patients.METHODS The study enrolled 249 patients who underwent both ATI and liver biopsy,including 78 with CHB and 171 with MASLD.Hepatic steatosis was classified into grades S0 to S3 according to the proportion of fat cells present.Liver fibrosis was staged from 0 to 4 according to the meta-analysis of histological data in viral hepatitis scoring system.The diagnostic performance of attenuation coefficient(AC)values across different groups was compared for each grade of steatosis.Factors associated with the AC values were determined through linear regression analysis.A multivariate logistic regression model was established to predict≥S2 within the MASLD group.RESULTS In both the CHB and the MASLD groups,AC values increased significantly with higher steatosis grade(P<0.001).In the CHB group,the areas under the curve(AUCs)of AC for predicting steatosis grades≥S1,≥S2 and S3 were 0.918,0.960 and 0.987,respectively.In contrast,the MASLD group showed AUCs of 0.836,0.774,and 0.688 for the same steatosis grades.The diagnostic performance of AC for detecting≥S2 and S3 indicated significant differences between the two groups(both P<0.001).Multivariate linear regression analysis identified body mass index,trigly-cerides,and steatosis grade as significant factors for AC.When the steatosis grade is≥S2,it can progress to more serious liver conditions.A clinical model integrating blood biochemical parameters and AC was developed in the MASLD group to enhance the prediction of≥S2,achieving an AUC of 0.848.CONCLUSION The AC could effectively discriminate the degree of steatosis in both the CHB and MASLD groups.In the MASLD group,when combined with blood biochemical parameters,AC exhibited better predictive ability for moderate to severe steatosis.展开更多
Myocardial perfusion imaging(MPI),which uses single-photon emission computed tomography(SPECT),is a well-known estimating tool for medical diagnosis,employing the classification of images to show situations in coronar...Myocardial perfusion imaging(MPI),which uses single-photon emission computed tomography(SPECT),is a well-known estimating tool for medical diagnosis,employing the classification of images to show situations in coronary artery disease(CAD).The automatic classification of SPECT images for different techniques has achieved near-optimal accuracy when using convolutional neural networks(CNNs).This paper uses a SPECT classification framework with three steps:1)Image denoising,2)Attenuation correction,and 3)Image classification.Image denoising is done by a U-Net architecture that ensures effective image denoising.Attenuation correction is implemented by a convolution neural network model that can remove the attenuation that affects the feature extraction process of classification.Finally,a novel multi-scale diluted convolution(MSDC)network is proposed.It merges the features extracted in different scales and makes the model learn the features more efficiently.Three scales of filters with size 3×3 are used to extract features.All three steps are compared with state-of-the-art methods.The proposed denoising architecture ensures a high-quality image with the highest peak signal-to-noise ratio(PSNR)value of 39.7.The proposed classification method is compared with the five different CNN models,and the proposed method ensures better classification with an accuracy of 96%,precision of 87%,sensitivity of 87%,specificity of 89%,and F1-score of 87%.To demonstrate the importance of preprocessing,the classification model was analyzed without denoising and attenuation correction.展开更多
In order to obtain a lower frequency band gap,this paper proposes a novel locally resonant meta-beam incorporating a softening nonlinear factor.An improved camroller structure is designed in this meta-beam to achieve ...In order to obtain a lower frequency band gap,this paper proposes a novel locally resonant meta-beam incorporating a softening nonlinear factor.An improved camroller structure is designed in this meta-beam to achieve the softening nonlinear stiffness of the local oscillators.Firstly,based on Hamilton's principle and the Galerkin method,the control equations for the coupled system are established.The theoretical band gap boundary is then derived with the modal analysis method.The theoretical results reveal that the band gap of the meta-beam shifts towards lower frequencies due to the presence of a softening nonlinear factor,distinguishing it from both linear metamaterials and those with hardening nonlinear characteristics.Then,the vibration attenuation characteristics of a finite size meta-beam are investigated through numerical calculation,and are verified by the theoretical results.Furthermore,parameter studies indicate that the reasonable design of the local oscillator parameters based on lightweight principles helps to achieve further broadband and efficient vibration reduction in the low-frequency region.Finally,a prototype of the meta-beam is fabricated and assembled,and the formations of the low-frequency band gap and the amplitude-induced band gap phenomenon are verified through experiments.展开更多
Ultrasound computed tomography(USCT)is a noninvasive biomedical imaging modality that offers insights into acoustic properties such as the sound speed(SS)and acoustic attenuation(AA)of the human body,enhancing diagnos...Ultrasound computed tomography(USCT)is a noninvasive biomedical imaging modality that offers insights into acoustic properties such as the sound speed(SS)and acoustic attenuation(AA)of the human body,enhancing diagnostic accuracy and therapy planning.Full waveform inversion(FWI)is a promising USCT image reconstruction method that optimizes the parameter fields of a wave propagation model via gradient-based optimization.However,twodimensional FWI methods are limited by their inability to account for three-dimensional wave propagation in the elevation direction,resulting in image artifacts.To address this problem,we propose a three-dimensional time-domain full waveform inversion algorithm to reconstruct the SS and AA distributions on the basis of a fractional Laplacian wave equation,adjoint field formulation,and gradient descent optimization.Validated by two sets of simulations,the proposed algorithm has potential for generating high-resolution and quantitative SS and AA distributions.This approach holds promise for clinical USCT applications,assisting early disease detection,precise abnormality localization,and optimized treatment planning,thus contributing to better healthcare outcomes.展开更多
Low-frequency vibroseis acquisition has become a routine operation in land seismic surveys,given the advantages of low-frequency signals in characterizing geological structures and enhancing the imaging of deep explor...Low-frequency vibroseis acquisition has become a routine operation in land seismic surveys,given the advantages of low-frequency signals in characterizing geological structures and enhancing the imaging of deep exploration targets.The two key points of low-frequency sweep design techniques include controlling the distortion and improving the output energy during the low-frequency stage.However,the vibrators are limited by the maximum fl ow provided by the hydraulic systems at the low-frequency stage,causing difficulty in satisfying exploration energy requirements.Initially,a theoretical analysis of the low-frequency acquisition performance of vibrators is conducted.A theoretical maximum output force below 10 Hz is obtained by guiding through theoretical formulas and combining actual vibrator parameters.Then,the signal is optimized according to the surface characteristics of the operation area.Finally,detailed application quality control and operational procedures are established.The new low-frequency sweep design method has overcome the maximum flow limitations of the hydraulic system,increased the low-frequency energy,and achieved broadband acquisition.The designed signal has been tested and applied on various types of ground surfaces in the Middle East desert region,yielding good performance.The proposed low-frequency sweep design method holds considerable value for the application of conventional vibroseis in low-frequency acquisition.展开更多
The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the ...The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the plasma sheath can be challenging.Obtaining the electron density of the plasma sheath is crucial for understanding and achieving plasma stealth of vehicles.In this work,the relationship between electromagnetic wave attenuation and electron density is deduced theoretically.The attenuation distribution along the propagation path is found to be proportional to the integral of the plasma electron density.This result is used to predict the electron density profile.Furthermore,the average electron density is obtained using a back-propagation neural network algorithm.Finally,the spatial distribution of the electron density can be determined from the average electron density and the normalized derivative of attenuation with respect to the propagation depth.Compared to traditional probe measurement methods,the proposed approach not only improves efficiency but also preserves the integrity of the plasma environment.展开更多
Controlling low-frequency noise presents a significant challenge for traditional sound absorption materials,such as foams and fibrous substances.Recently developed acoustic absorption metamaterials,which rely on local...Controlling low-frequency noise presents a significant challenge for traditional sound absorption materials,such as foams and fibrous substances.Recently developed acoustic absorption metamaterials,which rely on local resonance can effectively balance the volume occupation and low-frequency absorption performance.However,these materials often exhibit a very narrow and fixed absorption band.Inspired by Helmholtz resonators and bistable structures,we propose bistable reconfigurable acoustic metamaterials(BRAMs)that offer multiband low-frequency absorption.These BRAMs are fabricated using shape-memory polylactic acid(SM-PLA)via four-dimension(4D)printing technology.Consequently,the geometry and absorption performance of the BRAMs can be adjusted by applying thermal stimuli(at 55℃)to switch between two stable states.The BRAMs demonstrate excellent low-frequency absorption with multiband characteristics,achieving an absorption coefficient of 0.981 at 136 Hz and 0.998 at 230 Hz for stable state I,and coefficients of 0.984 at 156 Hz and 0.961 at 542 Hz for stable state II.It was found that the BRAMs with different inclined plate angles had linear recovery stages,and the recovery speeds range from 0.75 mm/s to 1.1 mm/s.By combining a rational structural design and 4D printing,the reported reconfigurable acoustic metamaterials will inspire further studies on the design of dynamic and broadband absorption devices.展开更多
Accurate acquisition and prediction of acoustic parameters of seabed sediments are crucial in marine sound propagation research.While the relationship between sound velocity and physical properties of sediment has bee...Accurate acquisition and prediction of acoustic parameters of seabed sediments are crucial in marine sound propagation research.While the relationship between sound velocity and physical properties of sediment has been extensively studied,there is still no consensus on the correlation between acoustic attenuation coefficient and sediment physical properties.Predicting the acoustic attenuation coefficient remains a challenging issue in sedimentary acoustic research.In this study,we propose a prediction method for the acoustic attenuation coefficient using machine learning algorithms,specifically the random forest(RF),support vector machine(SVR),and convolutional neural network(CNN)algorithms.We utilized the acoustic attenuation coefficient and sediment particle size data from 52 stations as training parameters,with the particle size parameters as the input feature matrix,and measured acoustic attenuation as the training label to validate the attenuation prediction model.Our results indicate that the error of the attenuation prediction model is small.Among the three models,the RF model exhibited the lowest prediction error,with a mean squared error of 0.8232,mean absolute error of 0.6613,and root mean squared error of 0.9073.Additionally,when we applied the models to predict the data collected at different times in the same region,we found that the models developed in this study also demonstrated a certain level of reliability in real prediction scenarios.Our approach demonstrates that constructing a sediment acoustic characteristics model based on machine learning is feasible to a certain extent and offers a novel perspective for studying sediment acoustic properties.展开更多
Metamaterials can control and manipulate acoustic/elastic waves on a subwavelength scale using cavities or additional components.However,the large cavity and weak stiffness components of traditional metamaterials may ...Metamaterials can control and manipulate acoustic/elastic waves on a subwavelength scale using cavities or additional components.However,the large cavity and weak stiffness components of traditional metamaterials may cause a conflict between vibroacoustic reduction and load-bearing capacity,and thus limit their application.Here,we propose a lightweight multifunctional metamaterial that can simultaneously achieve low-frequency sound insulation,broadband vibration reduction,and excellent load-bearing performance,named as vibroacoustic isolation and bearing metamaterial(VIBM).The advent of additive manufacturing technology provides a convenient and reliable method for the fabrication of VIBM samples.The results show that the compressive strength of the VIBM is as high as 9.71 MPa,which is nearly 87.81%higher than that of the conventional grid structure(CGS)under the same volume fraction.Moreover,the vibration and sound transmission are significantly reduced over a low and wide frequency range,which agrees well with the experimental data,and the reduction degree is obviously larger than that obtained by the CGS.The design strategy can effectively realize the key components of metamaterials and improve their application scenarios.展开更多
Seismic wavefields propagate through three-dimensional(3D)space,and their precise characterization is crucial for understanding subsurface structures.Traditional 2D algorithms,due to their limitations,are insufficient...Seismic wavefields propagate through three-dimensional(3D)space,and their precise characterization is crucial for understanding subsurface structures.Traditional 2D algorithms,due to their limitations,are insufficient to fully represent three-dimensional wavefields.The classic 3D Radon transform algorithm assumes that the wavefield's propagation characteristics are consistent in all directions,which often does not hold true in complex underground media.To address this issue,we present an improved 3D three-parameter Radon algorithm that considers the wavefield variation with azimuth and provides a more accurate wavefield description.However,introducing new parameters to describe the azimuthal varia-tion also poses computational challenges.The new Radon transform operator involves five variables and cannot be simply decomposed into small matrices for efficient computation;instead,it requires large matrix multiplication and inversion operations,significantly increasing the computational load.To overcome this challenge,we have integrated the curvature and frequency parameters,simplifying all frequency operators to the same,thereby significantly improving computation efficiency.Furthermore,existing transform algorithms neglect the lateral variation of seismic amplitudes,leading to discrepancies between the estimated multiples and those in the data.To enhance the amplitude preservation of the algorithm,we employ orthogonal polynomial fitting to capture the amplitude spatial variation in 3D seismic data.Combining these improvements,we propose a fast,amplitude-preserving,3D three-parameter Radon transform algorithm.This algorithm not only enhances computational efficiency while maintaining the original wavefield characteristics,but also improves the representation of seismic data by increasing amplitude fidelity.We validated the algorithm in multiple attenuation using both synthetic and real seismic data.The results demonstrate that the new algorithm significantly improves both accuracy and computational efficiency,providing an effective tool for analyzing seismic wavefields in complex subsurface structures.展开更多
Low-frequency structural vibrations caused by poor rigidity are one of the main obstacles limiting the machining efficiency of robotic milling.Existing vibration suppression strategies primarily focus on passive vibra...Low-frequency structural vibrations caused by poor rigidity are one of the main obstacles limiting the machining efficiency of robotic milling.Existing vibration suppression strategies primarily focus on passive vibration absorption at the robotic end and feedback control at the joint motor.Although these strategies have a certain vibration suppression effect,the limitations of robotic flexibility and the extremely limited applicable speed range remain to be overcome.In this study,a Magnetorheological Joint Damper(MRJD)is developed.The joint-mounted feature ensures machining flexibility of the robot,and the millisecond response time of the Magnetorheological Fluid(MRF)ensures a large effective spindle speed range.More importantly,the evolution law of the damping performance of MRJD was revealed based on a low-frequency chatter mechanism,which guarantees the application of MRJD in robotic milling machining.To analyze the influence of the robotic joint angle on the suppression effect of the MRJD,the joint braking coefficient and end braking coefficient were proposed.Parallel coordinate plots were used to visualize the joint range with the optimal vibration suppression effect.Finally,a combination of different postures and cutting parameters was used to verify the vibration suppression effect and feasibility of the joint angle optimization.The experimental results show that the MRJD,which directly improves the joint vibration resistance,can effectively suppress the low-frequency vibration of robotic milling under a variety of cutting conditions.展开更多
The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a flo...The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a floating breakwater are deduced via velocity potential decompositions and eigenfunction expansions.The effects of the floating breakwater configuration,working sea state and motion response on the wave attenuation performance are described,facilitating a deeper investigation into the wave attenuation mechanism of the breakwater.The results indicate that the width and draft of the breakwater,incident wavelength,and motion response significantly affect the transmission coefficient of the breakwater.The wave passability rate,α1(α1=0.5−2B/L),is defined to qualitatively explain why long-period waves are difficult to control and attenuate.The radiation effect caused by the motion of the floating breakwater on the transmission coefficient is relatively complex,and the wave attenuation efficiency of the breakwater can be improved by optimizing the motion response.The incident wavelength and breakwater width are selected as the control parameters,and transmission coefficient charts of the floating breakwater for two-dimensional conditions are drawn,providing technical guidance for the configuration selection and design of the floating breakwater.展开更多
The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity...The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity(i.e.,dispersion) and elastic anisotropy parameters.The relevant knowledge is of great importance for geofluid discrimination and hydrocarbon exploration in the porous shale reservoirs.We derive the wave equations for a periodic layered transversely isotropy medium with a vertical axis of symmetry(VTI) concurrently with the annular cracks(PLPC medium) based on the periodic-layered model and anisotropic Biot's theory,which simultaneously incorporate the effects of microscopic squirt fluid flow,mesoscopic interlayer fluid flow and macroscopic global fluid flow.Notably,the microscopic squirt shorten fluid flow emerges between the annular-shaped cracks and stiff pores,which generates one attenuation peak.Specifically,we first establish the stress-strain relationship and pore fluid pressure in a PLPC medium,and then use them to derive the wave equations by means of the Newton's second law.The plane analysis is implemented on the wave equations to yield the analytic solutions for phase velocities and attenuation factors of four waves,namely,fast P-wave,slow P-wave,SV-wave and SH-wave,and the anisotropy parameters can be therefore computed.Simulation results show that P-wave velocity have three attenuation peaks throughout the full frequency band,which respectively correspond to the influences of interlayer flow,the squirt flow and the Biot flow.Through the results of seismic velocity dispersion and attenuation at different incident angles,we find that the WIFF mechanism also has a significant impact on the dispersion characteristics of elastic anisotropy parameters within the low-mid frequency band.Moreover,it is shown that several poroelastic parameters,such as layer thickness ratio,crack aspect ratio and crack density have notable influence on seismic dispersion and attenuation.We compare the proposed modeled velocities with that given by the existing theory to confirm its validity.Our formulas and result can provide a better understanding of wave propagation in PLPC medium by considering the unified impacts of micro-,meso-and macro-scale WIFF mechanisms,which potentially lays a theoretical basis of rock physics for seismic interpretation.展开更多
Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically ...Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.展开更多
High-overload shocks are very likely to cause damage to the microstructure of MEMS devices, especially the continuous multiple high-overload shocks generated by the penetration of the multilayer target environment pos...High-overload shocks are very likely to cause damage to the microstructure of MEMS devices, especially the continuous multiple high-overload shocks generated by the penetration of the multilayer target environment pose more stringent challenges to its protective structure. In this study, the kinetic response model of the protective structure under single-pulse and continuous double-pulse impact is established,and a continuous double-pulse high overload impact test impact platform based on the sleeve-type bullet is constructed, and the protective performance of the multi-layer structure under multi-pulse is analyzed based on the acceleration decay ratio, and the results show that the protective performance of the structure has a positive correlation with its thickness, and it is not sensitive to the change of the load of the first impact;the first impact under double-pulse impact will cause damage to the microstructure through the superposition of the second impact. The first impact under double-pulse impact will cause an increase in the overload amplitude of the second impact through superposition;compared with the single-layer structure, the acceleration attenuation ratio of the double-layer structure can be increased by up to 26.13%, among which the epoxy-polyurethane combination has the best protection performance, with an acceleration attenuation ratio of up to 44.68%. This work provides a robust theoretical foundation and experimental basis for the reliable operation of MEMS devices, as well as for the design of protective structures in extreme environments.展开更多
基金sponsored by the National Science and Technology Major Project(Grant No.2011ZX05025-001-07)
文摘Mesoscopic fluid flow is the major cause of wave attenuation and velocity dispersion at seismic frequencies in porous rocks. The Johnson model provides solutions for the frequency-dependent quality factor and phase velocity in partially saturated porous media with pore patches of arbitrary shapes. We use the Johnson model to derive approximations for the quality factor Q at the high and low frequency limit, and obtain the approximate equation for Qmin based on geophysical and geometric parameters. A more accurate equation for Qmin is obtained after correcting for the linear errors between the exact and approximate Q values. The complexity of the pore patch shape affects the maximum attenuation of Qmin and the transition frequency ftr; furthermore, the effect on ftr is stronger than that on Qmin. Numerical solutions to Biot’s equation are computationally intensive; thus, we build an equivalent viscoelastic model on the basis of the Zener model, which well approximates the wave attenuation and dispersion in porous rocks in the seismic band.
基金Supported by National Natural Science Foundation of China(No.82260203).
文摘AIM:To study the relationships between amplitude of low-frequency fluctuations(ALFF)changes and clinical ophthalmic parameters in patients with primary open angle glaucoma(POAG)and analyze the diagnostic value of ALFF.METHODS:Twenty-four POAG patients and 24 healthy controls(HCs)underwent resting-state functional magnetic resonance imaging(rs-fMRI).Nonparametric rank-sum tests were used to compare the ALFF values in the slow-4 and slow-5 bands,and Spearman or Pearson correlation analysis was used to assess the correlation between ALFF changes and clinical ophthalmic parameters in POAG patients.Receiver operating characteristic(ROC)curves were used to evaluate the diagnostic performance of the ALFF.RESULTS:There were 16 males in POAG patients(median age 48y)and 12 males in HCs(median age 39y).Compared with HCs,POAG patients presented increased or decreased ALFF values in different brain regions,and similar changes were observed in mild POAG patients.The ALFF values were correlated with retinal nerve fiber layer(RNFL)thickness,inner limiting membrane-retinal pigment epithelium thickness changes and the degree of visual field defects.Analysis of the diagnostic value of the ALFF via ROC curves revealed that the right medial frontal gyrus[area under the curve(AUC)=0.9063]and superior frontal gyrus(AUC=0.9097)had better diagnostic value than did the optic disc area(AUC=0.8019),visual field index(VFI%,AUC=0.8988)and macular parameters.CONCLUSION:POAG patients present altered cortical function that is significantly correlated with the optic nerve and retinal thickness and had good diagnostic value,which may reflect the underlying neuropathological mechanism of POAG.
基金supported by the National Natural Science Foundation of China(U23B20151 and 52171253).
文摘Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.
基金supported by the National Natural Science Foundation of China(22265021,52231007,and 12327804)the Aeronautical Science Foundation of China(2020Z056056003)Jiangxi Provincial Natural Science Foundation(20232BAB212004).
文摘The precise tuning of magnetic nanoparticle size and magnetic domains,thereby shaping magnetic properties.However,the dynamic evolution mechanisms of magnetic domain configurations in relation to electromagnetic(EM)attenuation behavior remain poorly understood.To address this gap,a thermodynamically controlled periodic coordination strategy is proposed to achieve precise modulation of magnetic nanoparticle spacing.This approach unveils the evolution of magnetic domain configurations,progressing from individual to coupled and ultimately to crosslinked domain configurations.A unique magnetic coupling phenomenon surpasses the Snoek limit in low-frequency range,which is observed through micromagnetic simulation.The crosslinked magnetic configuration achieves effective low-frequency EM wave absorption at 3.68 GHz,encompassing nearly the entire C-band.This exceptional magnetic interaction significantly enhances radar camouflage and thermal insulation properties.Additionally,a robust gradient metamaterial design extends coverage across the full band(2–40 GHz),effectively mitigating the impact of EM pollution on human health and environment.This comprehensive study elucidates the evolution mechanisms of magnetic domain configurations,addresses gaps in dynamic magnetic modulation,and provides novel insights for the development of high-performance,low-frequency EM wave absorption materials.
基金The authors would like to acknowledge financial support from NSFC Basic Research Program on Deep Petroleum Resource Accumulation and Key Engineering Technologies(U19B6003-04-03)National Natural Science Foundation of China(41930425)+2 种基金Beijing Natural Science Foundation(8222073),R&D Department of China National Petroleum Corporation(Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications,2022DQ0604-01)Scientific Research and Technology Development Project of PetroChina(2021DJ1206)National Key Research and Development Program of China(2018YFA0702504).
文摘Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure conditions.Calibration with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]Hz.The Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent effects.Under dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the sandstone.In particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective pressure.In addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.
基金Supported by the National Natural Science Foundation of China,No.82202185and Shanghai Science and Technology Development Foundation,No.22Y11911500.
文摘BACKGROUND Hepatic steatosis,characterized by fat accumulation in hepatocytes,can result from metabolic dysfunction-associated steatotic liver disease(MASLD),infections,alcoholism,chemotherapy,and toxins.MASLD is diagnosed via imaging or biopsy with metabolic criteria and may progress to metabolic dysfunction–asso-ciated steatohepatitis,potentially leading to fibrosis,cirrhosis,or cancer.The coexistence of hepatic steatosis with chronic hepatitis B(CHB)is mainly related to metabolic factors and increases mortality and cancer risks.As a noninvasive method,attenuation imaging(ATI)shows promise in quantifying liver fat,demonstrating strong correlation with liver biopsy.AIM To investigate the disparity of ATI for assessing biopsy-based hepatic steatosis in CHB patients and MASLD patients.METHODS The study enrolled 249 patients who underwent both ATI and liver biopsy,including 78 with CHB and 171 with MASLD.Hepatic steatosis was classified into grades S0 to S3 according to the proportion of fat cells present.Liver fibrosis was staged from 0 to 4 according to the meta-analysis of histological data in viral hepatitis scoring system.The diagnostic performance of attenuation coefficient(AC)values across different groups was compared for each grade of steatosis.Factors associated with the AC values were determined through linear regression analysis.A multivariate logistic regression model was established to predict≥S2 within the MASLD group.RESULTS In both the CHB and the MASLD groups,AC values increased significantly with higher steatosis grade(P<0.001).In the CHB group,the areas under the curve(AUCs)of AC for predicting steatosis grades≥S1,≥S2 and S3 were 0.918,0.960 and 0.987,respectively.In contrast,the MASLD group showed AUCs of 0.836,0.774,and 0.688 for the same steatosis grades.The diagnostic performance of AC for detecting≥S2 and S3 indicated significant differences between the two groups(both P<0.001).Multivariate linear regression analysis identified body mass index,trigly-cerides,and steatosis grade as significant factors for AC.When the steatosis grade is≥S2,it can progress to more serious liver conditions.A clinical model integrating blood biochemical parameters and AC was developed in the MASLD group to enhance the prediction of≥S2,achieving an AUC of 0.848.CONCLUSION The AC could effectively discriminate the degree of steatosis in both the CHB and MASLD groups.In the MASLD group,when combined with blood biochemical parameters,AC exhibited better predictive ability for moderate to severe steatosis.
基金the Research Grant of Kwangwoon University in 2024.
文摘Myocardial perfusion imaging(MPI),which uses single-photon emission computed tomography(SPECT),is a well-known estimating tool for medical diagnosis,employing the classification of images to show situations in coronary artery disease(CAD).The automatic classification of SPECT images for different techniques has achieved near-optimal accuracy when using convolutional neural networks(CNNs).This paper uses a SPECT classification framework with three steps:1)Image denoising,2)Attenuation correction,and 3)Image classification.Image denoising is done by a U-Net architecture that ensures effective image denoising.Attenuation correction is implemented by a convolution neural network model that can remove the attenuation that affects the feature extraction process of classification.Finally,a novel multi-scale diluted convolution(MSDC)network is proposed.It merges the features extracted in different scales and makes the model learn the features more efficiently.Three scales of filters with size 3×3 are used to extract features.All three steps are compared with state-of-the-art methods.The proposed denoising architecture ensures a high-quality image with the highest peak signal-to-noise ratio(PSNR)value of 39.7.The proposed classification method is compared with the five different CNN models,and the proposed method ensures better classification with an accuracy of 96%,precision of 87%,sensitivity of 87%,specificity of 89%,and F1-score of 87%.To demonstrate the importance of preprocessing,the classification model was analyzed without denoising and attenuation correction.
基金supported by the National Natural Science Foundation of China(Nos.12172014,U224126412332001)。
文摘In order to obtain a lower frequency band gap,this paper proposes a novel locally resonant meta-beam incorporating a softening nonlinear factor.An improved camroller structure is designed in this meta-beam to achieve the softening nonlinear stiffness of the local oscillators.Firstly,based on Hamilton's principle and the Galerkin method,the control equations for the coupled system are established.The theoretical band gap boundary is then derived with the modal analysis method.The theoretical results reveal that the band gap of the meta-beam shifts towards lower frequencies due to the presence of a softening nonlinear factor,distinguishing it from both linear metamaterials and those with hardening nonlinear characteristics.Then,the vibration attenuation characteristics of a finite size meta-beam are investigated through numerical calculation,and are verified by the theoretical results.Furthermore,parameter studies indicate that the reasonable design of the local oscillator parameters based on lightweight principles helps to achieve further broadband and efficient vibration reduction in the low-frequency region.Finally,a prototype of the meta-beam is fabricated and assembled,and the formations of the low-frequency band gap and the amplitude-induced band gap phenomenon are verified through experiments.
基金supported by the National Key Research and Development Program of China(2022YFA1404400)the National Natural Science Foundation of China(62122072,12174368,61705216,62405306)+4 种基金Anhui Provincial Department of Science and Technology(202203a07020020,18030801138)Anhui Provincial Natural Science Foundation(2308085QA21,2408085QF187)the USTC Research Funds of the Double First-Class Initiative(YD2090002015)the Institute of Artificial Intelligence at Hefei Comprehensive National Science Center(23YGXT005)the Fundamental Research Funds for the Central Universities(WK2090000083).
文摘Ultrasound computed tomography(USCT)is a noninvasive biomedical imaging modality that offers insights into acoustic properties such as the sound speed(SS)and acoustic attenuation(AA)of the human body,enhancing diagnostic accuracy and therapy planning.Full waveform inversion(FWI)is a promising USCT image reconstruction method that optimizes the parameter fields of a wave propagation model via gradient-based optimization.However,twodimensional FWI methods are limited by their inability to account for three-dimensional wave propagation in the elevation direction,resulting in image artifacts.To address this problem,we propose a three-dimensional time-domain full waveform inversion algorithm to reconstruct the SS and AA distributions on the basis of a fractional Laplacian wave equation,adjoint field formulation,and gradient descent optimization.Validated by two sets of simulations,the proposed algorithm has potential for generating high-resolution and quantitative SS and AA distributions.This approach holds promise for clinical USCT applications,assisting early disease detection,precise abnormality localization,and optimized treatment planning,thus contributing to better healthcare outcomes.
基金The authors would like to express their sincere appreciation to the research project of CNPC Geophysical Key Lab(2022DQ0604-4)National Natural Science Foundation of China(Grant No.42074141).
文摘Low-frequency vibroseis acquisition has become a routine operation in land seismic surveys,given the advantages of low-frequency signals in characterizing geological structures and enhancing the imaging of deep exploration targets.The two key points of low-frequency sweep design techniques include controlling the distortion and improving the output energy during the low-frequency stage.However,the vibrators are limited by the maximum fl ow provided by the hydraulic systems at the low-frequency stage,causing difficulty in satisfying exploration energy requirements.Initially,a theoretical analysis of the low-frequency acquisition performance of vibrators is conducted.A theoretical maximum output force below 10 Hz is obtained by guiding through theoretical formulas and combining actual vibrator parameters.Then,the signal is optimized according to the surface characteristics of the operation area.Finally,detailed application quality control and operational procedures are established.The new low-frequency sweep design method has overcome the maximum flow limitations of the hydraulic system,increased the low-frequency energy,and achieved broadband acquisition.The designed signal has been tested and applied on various types of ground surfaces in the Middle East desert region,yielding good performance.The proposed low-frequency sweep design method holds considerable value for the application of conventional vibroseis in low-frequency acquisition.
基金Project supported by the Natural Science Foundation of Henan Province,China(Grant No.242300420634)the Cultivative Plan of Henan University of Technology(Grant No.2024PYJH035)+3 种基金the Research Foundation for Advanced Talents of Henan University of Technology(Grant Nos.2022BS067 and 2022BS068)the National Natural Science Foundation of China(Grant No.62301211)the Key Research and Development and Promotion Special Project(Science and Technology Research)in Henan Province,China(Grant No.232102211068)the Innovative Funds Plan of Henan University of Technology(Grant No.2022ZKCJ15)。
文摘The surface of a high-speed vehicle reentering the atmosphere is surrounded by plasma sheath.Due to the influence of the inhomogeneous flow field around the vehicle,understanding the electromagnetic properties of the plasma sheath can be challenging.Obtaining the electron density of the plasma sheath is crucial for understanding and achieving plasma stealth of vehicles.In this work,the relationship between electromagnetic wave attenuation and electron density is deduced theoretically.The attenuation distribution along the propagation path is found to be proportional to the integral of the plasma electron density.This result is used to predict the electron density profile.Furthermore,the average electron density is obtained using a back-propagation neural network algorithm.Finally,the spatial distribution of the electron density can be determined from the average electron density and the normalized derivative of attenuation with respect to the propagation depth.Compared to traditional probe measurement methods,the proposed approach not only improves efficiency but also preserves the integrity of the plasma environment.
基金financially supported by National Key Research and Development Program of China(Grant No.2023YFB4604800)National Natural Science Foundation of China(Grant No.52275331)financial support from the Hong Kong Scholars Program(Grant No.XJ2022014).
文摘Controlling low-frequency noise presents a significant challenge for traditional sound absorption materials,such as foams and fibrous substances.Recently developed acoustic absorption metamaterials,which rely on local resonance can effectively balance the volume occupation and low-frequency absorption performance.However,these materials often exhibit a very narrow and fixed absorption band.Inspired by Helmholtz resonators and bistable structures,we propose bistable reconfigurable acoustic metamaterials(BRAMs)that offer multiband low-frequency absorption.These BRAMs are fabricated using shape-memory polylactic acid(SM-PLA)via four-dimension(4D)printing technology.Consequently,the geometry and absorption performance of the BRAMs can be adjusted by applying thermal stimuli(at 55℃)to switch between two stable states.The BRAMs demonstrate excellent low-frequency absorption with multiband characteristics,achieving an absorption coefficient of 0.981 at 136 Hz and 0.998 at 230 Hz for stable state I,and coefficients of 0.984 at 156 Hz and 0.961 at 542 Hz for stable state II.It was found that the BRAMs with different inclined plate angles had linear recovery stages,and the recovery speeds range from 0.75 mm/s to 1.1 mm/s.By combining a rational structural design and 4D printing,the reported reconfigurable acoustic metamaterials will inspire further studies on the design of dynamic and broadband absorption devices.
基金funded by the Basic Scientific Fund for National Public Research Institutes of China(No.2022 S01)the National Natural Science Foundation of China(Nos.42176191,42049902,and U22A2012)+5 种基金the Shandong Provincial Natural Science Foundation,China(No.ZR2022YQ40)the National Key R&D Program of China(No.2021YFF0501202)the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(No.SML2023 SP232)the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.241gqb006)Data acquisition and sample collections were supported by the National Natural Science Foundation of China Open Research Cruise(Cruise No.NORC2021-02+NORC2021301)funded by the Shiptime Sharing Project of the National Natural Science Foundation of China。
文摘Accurate acquisition and prediction of acoustic parameters of seabed sediments are crucial in marine sound propagation research.While the relationship between sound velocity and physical properties of sediment has been extensively studied,there is still no consensus on the correlation between acoustic attenuation coefficient and sediment physical properties.Predicting the acoustic attenuation coefficient remains a challenging issue in sedimentary acoustic research.In this study,we propose a prediction method for the acoustic attenuation coefficient using machine learning algorithms,specifically the random forest(RF),support vector machine(SVR),and convolutional neural network(CNN)algorithms.We utilized the acoustic attenuation coefficient and sediment particle size data from 52 stations as training parameters,with the particle size parameters as the input feature matrix,and measured acoustic attenuation as the training label to validate the attenuation prediction model.Our results indicate that the error of the attenuation prediction model is small.Among the three models,the RF model exhibited the lowest prediction error,with a mean squared error of 0.8232,mean absolute error of 0.6613,and root mean squared error of 0.9073.Additionally,when we applied the models to predict the data collected at different times in the same region,we found that the models developed in this study also demonstrated a certain level of reliability in real prediction scenarios.Our approach demonstrates that constructing a sediment acoustic characteristics model based on machine learning is feasible to a certain extent and offers a novel perspective for studying sediment acoustic properties.
基金Project supported by the National Natural Science Foundation of China(Nos.11991032 and 52241103)the Hunan Province Graduate Research Innovation Project of China(No.KY0409052440)。
文摘Metamaterials can control and manipulate acoustic/elastic waves on a subwavelength scale using cavities or additional components.However,the large cavity and weak stiffness components of traditional metamaterials may cause a conflict between vibroacoustic reduction and load-bearing capacity,and thus limit their application.Here,we propose a lightweight multifunctional metamaterial that can simultaneously achieve low-frequency sound insulation,broadband vibration reduction,and excellent load-bearing performance,named as vibroacoustic isolation and bearing metamaterial(VIBM).The advent of additive manufacturing technology provides a convenient and reliable method for the fabrication of VIBM samples.The results show that the compressive strength of the VIBM is as high as 9.71 MPa,which is nearly 87.81%higher than that of the conventional grid structure(CGS)under the same volume fraction.Moreover,the vibration and sound transmission are significantly reduced over a low and wide frequency range,which agrees well with the experimental data,and the reduction degree is obviously larger than that obtained by the CGS.The design strategy can effectively realize the key components of metamaterials and improve their application scenarios.
基金supported in part by National Natural Science Foundation of China(NSFC)under grant 42274139in part by the R&D Department of China National Petroleum Corporation(Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications,2022DQ0604-03).
文摘Seismic wavefields propagate through three-dimensional(3D)space,and their precise characterization is crucial for understanding subsurface structures.Traditional 2D algorithms,due to their limitations,are insufficient to fully represent three-dimensional wavefields.The classic 3D Radon transform algorithm assumes that the wavefield's propagation characteristics are consistent in all directions,which often does not hold true in complex underground media.To address this issue,we present an improved 3D three-parameter Radon algorithm that considers the wavefield variation with azimuth and provides a more accurate wavefield description.However,introducing new parameters to describe the azimuthal varia-tion also poses computational challenges.The new Radon transform operator involves five variables and cannot be simply decomposed into small matrices for efficient computation;instead,it requires large matrix multiplication and inversion operations,significantly increasing the computational load.To overcome this challenge,we have integrated the curvature and frequency parameters,simplifying all frequency operators to the same,thereby significantly improving computation efficiency.Furthermore,existing transform algorithms neglect the lateral variation of seismic amplitudes,leading to discrepancies between the estimated multiples and those in the data.To enhance the amplitude preservation of the algorithm,we employ orthogonal polynomial fitting to capture the amplitude spatial variation in 3D seismic data.Combining these improvements,we propose a fast,amplitude-preserving,3D three-parameter Radon transform algorithm.This algorithm not only enhances computational efficiency while maintaining the original wavefield characteristics,but also improves the representation of seismic data by increasing amplitude fidelity.We validated the algorithm in multiple attenuation using both synthetic and real seismic data.The results demonstrate that the new algorithm significantly improves both accuracy and computational efficiency,providing an effective tool for analyzing seismic wavefields in complex subsurface structures.
基金supported by the National Natural Science Foundation of China(No.U20A20294)the National Natural Science Foundation of China(No.52322511)the National Natural Science Foundation of China(No.52188102).
文摘Low-frequency structural vibrations caused by poor rigidity are one of the main obstacles limiting the machining efficiency of robotic milling.Existing vibration suppression strategies primarily focus on passive vibration absorption at the robotic end and feedback control at the joint motor.Although these strategies have a certain vibration suppression effect,the limitations of robotic flexibility and the extremely limited applicable speed range remain to be overcome.In this study,a Magnetorheological Joint Damper(MRJD)is developed.The joint-mounted feature ensures machining flexibility of the robot,and the millisecond response time of the Magnetorheological Fluid(MRF)ensures a large effective spindle speed range.More importantly,the evolution law of the damping performance of MRJD was revealed based on a low-frequency chatter mechanism,which guarantees the application of MRJD in robotic milling machining.To analyze the influence of the robotic joint angle on the suppression effect of the MRJD,the joint braking coefficient and end braking coefficient were proposed.Parallel coordinate plots were used to visualize the joint range with the optimal vibration suppression effect.Finally,a combination of different postures and cutting parameters was used to verify the vibration suppression effect and feasibility of the joint angle optimization.The experimental results show that the MRJD,which directly improves the joint vibration resistance,can effectively suppress the low-frequency vibration of robotic milling under a variety of cutting conditions.
基金supported by the China National Funds for Distinguished Young Scientists(Grant No.52025112)the National Natural Science Foundation of China(Grant Nos.52331011 and 52301322)the Jiangsu Provincial Natural Science Foundation(Grant No.BK20220653).
文摘The wave attenuation performance of a floating breakwater is important in engineering applications.On the basis of potential flow theory,the analytical and simplified solutions of the transmission coefficient of a floating breakwater are deduced via velocity potential decompositions and eigenfunction expansions.The effects of the floating breakwater configuration,working sea state and motion response on the wave attenuation performance are described,facilitating a deeper investigation into the wave attenuation mechanism of the breakwater.The results indicate that the width and draft of the breakwater,incident wavelength,and motion response significantly affect the transmission coefficient of the breakwater.The wave passability rate,α1(α1=0.5−2B/L),is defined to qualitatively explain why long-period waves are difficult to control and attenuate.The radiation effect caused by the motion of the floating breakwater on the transmission coefficient is relatively complex,and the wave attenuation efficiency of the breakwater can be improved by optimizing the motion response.The incident wavelength and breakwater width are selected as the control parameters,and transmission coefficient charts of the floating breakwater for two-dimensional conditions are drawn,providing technical guidance for the configuration selection and design of the floating breakwater.
基金sponsorship of the National Natural Science Foundation of China (U24B2020,42174139)。
文摘The wave-induced fluid flow(WIFF) occurring in the ubiquitous layered porous media(e.g.,shales)usually causes the appreciable seismic energy dissipation,which further leads to the frequency dependence of wave velocity(i.e.,dispersion) and elastic anisotropy parameters.The relevant knowledge is of great importance for geofluid discrimination and hydrocarbon exploration in the porous shale reservoirs.We derive the wave equations for a periodic layered transversely isotropy medium with a vertical axis of symmetry(VTI) concurrently with the annular cracks(PLPC medium) based on the periodic-layered model and anisotropic Biot's theory,which simultaneously incorporate the effects of microscopic squirt fluid flow,mesoscopic interlayer fluid flow and macroscopic global fluid flow.Notably,the microscopic squirt shorten fluid flow emerges between the annular-shaped cracks and stiff pores,which generates one attenuation peak.Specifically,we first establish the stress-strain relationship and pore fluid pressure in a PLPC medium,and then use them to derive the wave equations by means of the Newton's second law.The plane analysis is implemented on the wave equations to yield the analytic solutions for phase velocities and attenuation factors of four waves,namely,fast P-wave,slow P-wave,SV-wave and SH-wave,and the anisotropy parameters can be therefore computed.Simulation results show that P-wave velocity have three attenuation peaks throughout the full frequency band,which respectively correspond to the influences of interlayer flow,the squirt flow and the Biot flow.Through the results of seismic velocity dispersion and attenuation at different incident angles,we find that the WIFF mechanism also has a significant impact on the dispersion characteristics of elastic anisotropy parameters within the low-mid frequency band.Moreover,it is shown that several poroelastic parameters,such as layer thickness ratio,crack aspect ratio and crack density have notable influence on seismic dispersion and attenuation.We compare the proposed modeled velocities with that given by the existing theory to confirm its validity.Our formulas and result can provide a better understanding of wave propagation in PLPC medium by considering the unified impacts of micro-,meso-and macro-scale WIFF mechanisms,which potentially lays a theoretical basis of rock physics for seismic interpretation.
基金supported in part by the National Natural Science Foundation of China under Grant 41874143 and Grant 42374163in part by the Key Program of Natural Science Foundation of Sichuan Province of China under Grant 2023NSFSC0019in part by the Central Funds Guiding the Local Science and Technology Development under Grant 2024ZYD0124.
文摘Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.
基金supported by Fund of the National Natural Science Foundation of China (Grant No. 52375553)。
文摘High-overload shocks are very likely to cause damage to the microstructure of MEMS devices, especially the continuous multiple high-overload shocks generated by the penetration of the multilayer target environment pose more stringent challenges to its protective structure. In this study, the kinetic response model of the protective structure under single-pulse and continuous double-pulse impact is established,and a continuous double-pulse high overload impact test impact platform based on the sleeve-type bullet is constructed, and the protective performance of the multi-layer structure under multi-pulse is analyzed based on the acceleration decay ratio, and the results show that the protective performance of the structure has a positive correlation with its thickness, and it is not sensitive to the change of the load of the first impact;the first impact under double-pulse impact will cause damage to the microstructure through the superposition of the second impact. The first impact under double-pulse impact will cause an increase in the overload amplitude of the second impact through superposition;compared with the single-layer structure, the acceleration attenuation ratio of the double-layer structure can be increased by up to 26.13%, among which the epoxy-polyurethane combination has the best protection performance, with an acceleration attenuation ratio of up to 44.68%. This work provides a robust theoretical foundation and experimental basis for the reliable operation of MEMS devices, as well as for the design of protective structures in extreme environments.
